Evaluation of easy-removing antioxidant films of chitosan with Melaleuca alternifolia essential oil

Characterization of chitosan film incorporated pine bark extract and application in carp slices packaging

Active films based on chitosan incorporated with pine bark extract (PBE) were prepared and characterized. Subsequently, these films were utilized for packaging carp slices in refrigerated storage at 4 ± 1 °C. Analysis of the physicochemical properties and biological activity of the active films revealed that, except for water content, all assessed indices showed an increasing trend with an increase in the amount of supplemental PBE. As this trend progresses, scanning electron microscopy (SEM) analysis revealed deposition on the film surface accompanied by transverse lines and fractures, while the color of the film gradually changed from light yellow to reddish-brown. Fourier transform infrared spectroscopy (FTIR) indicated that the phenolic hydroxyl groups in PBE interacted with the hydrogen in the amino groups of chitosan molecules to form non-covalent bonds. X-ray diffraction analysis (XRD) showed that the reaction between PBE and chitosan altered the crystalline structure of chitosan molecules. Moreover, the analysis of the effects of active films on the pH, water-holding capacity, thiobarbituric acid values, and the total bacterial counts of carp slices revealed that in terms of preservation, films containing 30 % PBE were the most effective, using which the shelf life of carp slices could be extended by 50 %.

Enhancing Encapsulation Efficiency of Chavir Essential Oil via Enzymatic Hydrolysis and Ultrasonication of Whey Protein Concentrate-Maltodextrin

This study focused on the characterization of emulsions and microparticles encapsulating Chavir essential oil (EO) by application of modified whey protein concentrate-maltodextrin (WPC-MD). Different physical, chemical, morphological, thermal, and antioxidant properties and release behavior of spray-dried microparticles were assessed. Antioxidant, solubility, emulsifying, and foaming activities of modified WPC were increased compared to those of primary material. The results indicated that the particle size distribution varied depending on the type of carriers used, with the smallest particles formed by hydrolyzed WPC (HWPC). Binary blends of modified WPC-MD led to improved particle sizes. The spray-drying yield ranged from 64.1% to 85.0%, with higher yields observed for blends of MD with sonicated WPC (UWPC). Microparticles prepared from primary WPC showed irregular and wrinkled surfaces with indentations and pores, indicating a less uniform morphology. The UWPC as a wall material led to microparticles with increased small cracks and holes on their surface. However, HWPC negatively affected the integrity of the microparticles, resulting in broken particles with irregular shapes and surface cracks, indicating poor microcapsule formation. Encapsulating EO using WPC-MD increased the thermal stability of EO significantly, enhancing the degradation temperature of EO by 2 to 2.5-fold. The application of primary WPC (alone or in combination with MD) as wall materials produced particles with the lowest antioxidant properties because the EO cannot migrate to the surface of the particles. Enzymatic hydrolysis of WPC negatively impacted microparticle integrity, potentially increasing EO release. These findings underscore the crucial role of wall materials in shaping the physical, morphological, thermal, antioxidant, and release properties of spray-dried microparticles, offering valuable insights for microencapsulation techniques.

Polysaccharide film containing cinnamaldehyde-chitosan nanoparticles, a new eco-packaging material effective in meat preservation

The development of novel eco-friendly materials like chitosan for food storage and preservation has become crucial in eliminating plastic packaging and minimizing waste. In this work, cinnamaldehyde has been encapsulated in chitosan nanoparticles and subsequently incorporated into a 2 % chitosan film. The obtained nanoparticles achieved an average radius size of 89.80 nm, PDI of 0.40, and spherical morphology determined by SEM. Cinnamaldehyde was encapsulated in chitosan nanoparticles achieving values of encapsulation close to 7 %, showing a biphasic release profile with sustained release during 5 days. Films with an average thickness of 0.124 mm and elongation at break of 63.66 % to 76.50 % were obtained. Finally, the antimicrobial properties of the films was tested showing reduction values in total aerobic value of 4.85 log cfu/g, total coliform of 1.26 log cfu/g and grow potential value of < 0.5 log10 for Listeria monocitogenes over 20 days.

Multicomponent chitosan complex/polyvinyl alcohol blended film with full-band UV-shielding performance and excellent antioxidant property for active food packaging

Utilizing renewable natural resources to construct multifunctional packaging materials is critical to achieving sustainable development in the food packaging industry. In this study, we crafted transparent films with comprehensive UV-shielding and antioxidant properties by blending a multicomponent chitosan complex with polyvinyl alcohol (PVA), subsequently applied to preserve peanut butter. The multicomponent chitosan complex, synthesized from chitosan, ferulic acid (FA), and 5-oxo-3,5-dihydro-2H-thiazolo [3,2-a] pyridine-7-carboxylic acid (TPCA) through direct heating in water, served as the foundation. This chitosan complex was seamlessly blended with PVA, resulting in the creation of a transparent film through the solvent casting method. A meticulous investigation into the chemical structure and physicochemical properties of the blended films was conducted. The FA and TPCA components exhibited robust ultraviolet absorption properties, conferring virtually complete full-band ultraviolet shielding ability to the blend film. Additionally, FA endowed the blended film with significant antioxidant activity. The effectiveness of the chitosan complex/PVA blended film in preserving peanut butter from oxidative spoilage was demonstrated, showcasing its robustness in food preservation. Our research underscores the significance of creating advanced packaging materials from sustainable sources.

Recent Highlights in Sustainable Bio-Based Edible Films and Coatings for Fruit and Vegetable Applications

The present review paper focuses on recent developments in edible films and coatings made of base compounds from biological sources, namely plants, animals, algae, and microorganisms. These sources include by-products, residues, and wastes from agro-food industries and sea products that contribute to sustainability concerns. Chitosan, derived from animal biological sources, such as crustacean exoskeletons, has been the most studied base compound over the past three years. Polysaccharides typically constitute no more than 3-5% of the film/coating base solution, with some exceptions, like Arabic gum. Proteins and lipids may be present in higher concentrations, such as zein and beeswax. This review also discusses the enrichment of these bio-based films and coatings with various functional and/or bioactive compounds to confer or enhance their functionalities, such as antimicrobial, antioxidant, and anti-enzymatic properties, as well as physical properties. Whenever possible, a comparative analysis among different formulations was performed. The results of the applications of these edible films and coatings to fruit and vegetable products are also described, including shelf life extension, inhibition of microbial growth, and prevention of oxidation. This review also explores novel types of packaging, such as active and intelligent packaging. The potential health benefits of edible films and coatings, as well as the biodegradability of films, are also discussed. Finally, this review addresses recent innovations in the edible films and coatings industry, including the use of nanotechnologies, aerogels, and probiotics, and provides future perspectives and the challenges that the sector is facing.

Characterization of active films of chitosan containing nettle Urtica dioica L. extract: Spectral and water properties, microstructure, and antioxidant activity

Chitosan films enriched with aqueous nettle extract (Urtica dioica L.) were evaluated by measuring their solubility, equilibrium moisture, water vapor permeability, spectral and antioxidant properties, and microstructure. Nettle extract showed a significant effect on the analyzed film properties. The addition of nettle extract manifested a sharp decrease in water vapor permeability, decreasing from 5.64 · 10-11 to 2.22 · 10-11 g/m·s·Pa. The chitosan- nettle extract films exhibited a high free-radical scavenging activity against 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS). Incorporation of nettle extract into the chitosan matrix was successfully carried out to obtain antioxidant films. The results obtained showed that the incorporation of nettle extract allowed obtaining chitosan films with antioxidant properties, including a total phenolic content up to 1.57 mg GAE/g film. Furthermore, the films with nettle extract boast an UV shielding ability with transmittance values close to zero in the UV region and a water solubility up to 1 %. The inherent biodegradability is also a strong advantage of the developed active films.

Oxidized of chitosan with different molecular weights for potential antifungal and plant growth regulator applications

The application of Chitosan (CS) in drug delivery systems, plant growth promotion, antibacterial potentiality and plant defense is significantly limited by its inability to dissolve in neutral solutions. In this work, CS with different molecular weights (Mw) has been oxidized, yielding five kinds of oxidized chitosan (OCS 1-5) with solubilities in neutral solutions. The results obtained from Fourier Transform Infrared Spectroscopy clearly showed the successful oxidation of the hydroxyl group to form aldehyde and carboxyl groups. And the CS derivatives showed the wrinkled and lamellar structures on the surface of OCS. The results of antifungal activity against Fusarium graminearum showed that the OCS dissolved in 2 % (V/V) acetic acid exhibited better performance of almost complete inhibition of mycelial growth compared with CS at the concentration of 500 μg/mL. Among the five OCS, OCS-4 exhibited the best antifungal effect and had the lowest EC50 value of 581.68 μg/mL in samples. OCS-4 displayed superior promoting effect on seed germination with a germination potential of 62.2 % at a concentration of 3 g/L and a germination rate of 74.5 %. Additionally, the other four OCS also showed excellent antifungal activity with dose-dependent manners. These results indicated that the OCS had excellent antifungal potential in agricultural production.

Facile fabrication and characterization of novel antimicrobial and antioxidant poly (3-hydroxybutyrate)/essential oil composites for potential use in active food packaging applications

Poly (3-hydroxybutyrate) (PHB) is a bio-based biodegradable biopolymer with excellent potential to substitute petrochemical-based food packaging materials. Nevertheless, low elongation at break is one of the limiting factors for its commercial-scale application in the packaging field. Microbial contamination and lipid oxidation are the two main causes of food spoilage and pose huge challenges to the food industry. In this regard, essential oils are bioactive compounds that, in addition to providing antimicrobial and antioxidant properties, can improve the flexibility of biopolymers. Therefore, to overcome the aforementioned challenges, the current study aimed to fabricate novel PHB composite films loaded with essential oils, viz. grapeseed oil (GS), bergamot oil (BG), and ginger oil (GG), by a simple solution casting technique. To evaluate the potential of prepared PHB/essential oil composites for food packaging applications, extensive characterizations of their mechanical, structural, barrier, optical, and thermal properties were carried out. Interestingly, PHB/essential oil composites demonstrated good UV-blocking properties without affecting its transparency. PHB films loaded with 5 wt% GS showed a 30-fold enhancement in flexibility compared to pristine PHB. The DPPH radical scavenging activities of PHB/5GS, PHB/5BG, and PHB/5GG films are 53.17 ± 4.76, 50.70 ± 3.92 and 86.38 ± 2.73 %, respectively. The antibacterial activities of PHB/5GS, PHB/5BG, and PHB/5GG films against the model bacterium E. coli are 19.72 ± 0.97, 12.62 ± 2.23 and 29.98 ± 2.15 %, respectively, whereas, for S. aureus, the values are 61.56 ± 3.39, 30.28 ± 0.92 and 70.97 ± 0.26 %, respectively. Moreover, the overall migration values of the composite films in simulants representing hydrophilic, acidic, and lipophilic foods did not exceed the prescribed overall migration limit (10 mg/dm2).

Synthesis and Characterization of Antibacterial Chitosan Films with Ciprofloxacin in Acidic Conditions

This work presents the results of research on obtaining chitosan (CS) films containing on their surface ciprofloxacin (CIP). A unique structure was obtained that not only gives new properties to the films, but also changes the way of coverage and structure of the surface. The spectroscopic test showed that in the process of application of CIP on the surface of CS film, CIP was converted from its crystalline form to an amorphic one, hence improving its bioavailability. This improved its scope of microbiological effect. The research was carried out on the reduction of CIP concentration during the process of CIP adhesion to the surface of chitosan films. The antibacterial activity of the CS films with and without the drug was evaluated in relation to Escherichia coli and Staphylococcus aureus, as well as Candida albicans and Penicillium expansum. Changes in the morphology and roughness of membrane surfaces after the antibacterial molecule adhesion process were tested with atomic force microscopy (AFM) and scanning electron microscopy (SEM). Structural analysis of CS and its modifications were confirmed with Fourier-transform spectroscopy in the infrared by an attenuated total reflectance of IR radiation (FTIR-ATR) and solid-state nuclear magnetic resonance (NMR).

Tea Tree Oil: Properties and the Therapeutic Approach to Acne-A Review

Acne vulgaris is an inflammatory dermatological pathology that affects mostly young people. However, it can also appear in adulthood, mainly in women. It has a high psychosocial impact, not only at the time of active lesions but also due to the consequences of lesions such as scarring and hyperpigmentation. Several factors are involved in the physiopathology of acne and the constant search for active ingredients is a reality, namely phytotherapeutic ingredients. Tea tree oil is an essential oil extracted from Melaleuca alternifolia (Maiden & Betch) Cheel with known antibacterial, anti-inflammatory, and antioxidant properties, making it a candidate for the treatment of acne. This review aims to describe the various properties of tea tree oil that make it a possible ingredient to use in the treatment of acne and to present several human studies that have evaluated the efficacy and safety of using tea tree oil in the treatment of acne. It can be concluded that tea tree oil has good antibacterial, anti-inflammatory, and antioxidant properties that result in a decrease in the number of inflammatory lesions, mainly papules, and pustules. However, given the diversity of study designs, it is not possible to draw concrete conclusions on the efficacy and safety of this oil in the treatment of acne.

Fortification of polysaccharide-based packaging films and coatings with essential oils: A review of their preparation and use in meat preservation

As the demand for botanical food additives and eco-friendly food packaging materials grows, the use of essential oils, edible biodegradable films and coatings are becoming more popular in packaging. In this review, we discussed the recent research trends in the use of natural essential oils, as well as polysaccharide-based coatings and films: from the composition of the substrates to preparing formulations for the production of film-forming technologies. Our review emphasized the functional properties of polysaccharide-based edible films that contain plant essential oils. The interactions between essential oils and other ingredients in edible films and coatings including polysaccharides, lipids, and proteins were discussed along with effects on film physical properties, essential oil release, their active role in meat preservation. We presented the opportunities and challenges related to edible films and coatings including essential oils to increase their industrial value and inform the development of edible biodegradable packaging, bio-based functional materials, and innovative food preservation technologies.

Chitosan/snail slime films as multifunctional platforms for potential biomedical and cosmetic applications: physical and chemical characterization

Due to the pollution problem, the use of more sustainable materials with a reduced environmental impact, spanning across biocompatible and biodegradable polymers, is growing worldwide in many different fields, particularly when referring to applications in Life Sciences. Accordingly, with the aim of developing multifunctional materials for potential cosmetic/biomedical purposes, this work reports the physical and chemical characterization of chitosan-based films blended with snail slime, exhibiting antioxidant and sunscreen features. A suitable formulation for preparing free-standing chitosan platforms, mixing low molecular weight chitosan, lactic acid, glycerol, and snail slime into an appropriate ratio, is thus described. The results obtained by morphological analysis and ATR-FTIR spectroscopy, XRD, swelling analysis (also when varying pH, ionic strength, and temperature), and WVTR measurements evidence a uniform distribution of snail slime inside the chitosan network, forming more compacted structures. At first, the UV-Vis analysis is used to investigate the theoretical Sun Protection Factor, finding that these innovative platforms can be used for preventing sunburn. Then, the antioxidant features are investigated using the ABTS assay, displaying a snail slime-mediated and dose-dependent boosted activity.

Nanoencapsulation of Chavir (Ferulago angulata) essential oil in chitosan carrier: Investigating physicochemical, morphological, thermal, antimicrobial and release profile of obtained nanoparticles

The essential oil obtained by steam-distillation from Ferulago angulata (FA) was stabilized by ionic-gelation technique within chitosan nanoparticles (CSNPs). The aim of this study was to investigate different properties of CSNPs loaded with FA essential oil (FAEO). GC-MS analysis detected the major components of FAEO as α-pinene (21.85 %), β-ocimene (19.37 %), bornyl acetate (10.50 %) and thymol (6.80 %). Due to presence of these components, FAEO showed stronger antibacterial activity against S. aureus and E. coli with MIC values of 0.45 and 2.12 mg/mL, respectively. Chitosan to FAEO ratio of 1: 1.25 exhibited a maximum encapsulation efficiency (60.20 %) and loading capacity (24.5 %) values. By increasing loading ratio from 1:0 to 1:1.25, mean particle size and polydispersity index were significantly (P < 0.05) increased from 175 to 350 nm and 0.184 to 0.32, respectively, while zeta potential was decreased from +43.5 to +19.2 mV, indicating the physical instability of CSNPs at higher FAEO loading concentrations. SEM observation proved successful formation of spherical CSNPs during the nanoencapsulation of EO. FTIR spectroscopy indicated successful physical entrapment of EO within CSNPs. Differential scanning calorimetry also proved the physical entrapment of FAEO into polymeric matrix of chitosan. XRD exhibited a broad peak at 2θ = 19° - 25° in loaded-CSNPs as indication of successful entrapment of FAEO within CSNPs. Thermogravimetric analysis showed that encapsulated essential oil was decomposed at higher temperature than its free from, indicating the success of encapsulation technique in stabilizing FAEO within CSNPs.

Chitosan Edible Films and Coatings with Added Bioactive Compounds: Antibacterial and Antioxidant Properties and Their Application to Food Products: A Review

Chitosan is the deacetylated form of chitin regarded as one of the most abundant polymers and due to its properties, both chitosan alone or in combination with bioactive substances for the production of biodegradable films and coatings is gaining attention in terms of applications in the food industry. To enhance the antimicrobial and antioxidant properties of chitosan, a vast variety of plant extracts have been incorporated to meet consumer demands for more environmentally friendly and synthetic preservative-free foods. This review provides knowledge about the antioxidant and antibacterial properties of chitosan films and coatings enriched with natural extracts as well as their applications in various food products and the effects they had on them. In a nutshell, it has been demonstrated that chitosan can act as a coating or packaging material with excellent antimicrobial and antioxidant properties in addition to its biodegradability, biocompatibility, and non-toxicity. However, further research should be carried out to widen the applications of bioactive chitosan coatings to more foods and industries as well was their industrial scale-up, thus helping to minimize the use of plastic materials.

Polycaprolactone (PCL)-Polylactic Acid (PLA)-Glycerol (Gly) Composites Incorporated with Zinc Oxide Nanoparticles (ZnO-NPs) and Tea Tree Essential Oil (TTEO) for Tissue Engineering Applications

The search for new biocompatible materials that can replace invasive materials in biomedical applications has increased due to the great demand derived from accidents and diseases such as cancer in various tissues. In this sense, four formulations based on polycaprolactone (PCL) and polylactic acid (PLA) incorporated with zinc oxide nanoparticles (ZnO-NPs) and tea tree essential oil (TTEO) were prepared. The sol-gel method was used for zinc oxide nanoparticle synthesis with an average size of 11 ± 2 nm and spherical morphology. On the other hand, Fourier Transformed infrared spectroscopy (FTIR) showed characteristic functional groups for each composite component. The TTEO incorporation in the formulations was related to the increased intensity of the C-O-C band. The thermal properties of the materials show that the degradative properties of the ZnO-NPs decrease the thermal stability. The morphological study by scanning electron microscopy (SEM) showed that the presence of TTEO and ZnO-NPs act synergistically, obtaining smooth surfaces, whereas membranes with the presence of ZnO-NPs or TTEO only show porous morphologies. Histological implantation of the membranes showed biocompatibility and biodegradability after 60 days of implantation. This degradation occurs through the fragmentation of the larger particles with the presence of connective tissue constituted by type III collagen fibers, blood vessels, and inflammatory cells, where the process of resorption of the implanted material continues.

Gelatin and Chitosan as Meat By-Products and Their Recent Applications

Meat by-products such as bones, skin, horns, hooves, feet, skull, etc., are produced from slaughtered mammals. Innovative solutions are very important to achieving sustainability and obtaining the added value of meat by-products with the least impact on the environment. Gelatin, which is obtained from products high in collagen, such as dried skin and bones, is used in food processing, and pharmaceuticals. Chitosan is derived from chitin and is well recognized as an edible polymer. It is a natural product that is non-toxic and environmentally friendly. Recently, chitosan has attracted researchers' interests due to its biological activities, including antimicrobial, antitumor, and antioxidant properties. In this review, article, we highlighted the recent available information on the application of gelatin and chitosan as antioxidants, antimicrobials, food edible coating, enzyme immobilization, biologically active compound encapsulation, water treatment, and cancer diagnosis.

Functional Chitosan-Based Composite Film Incorporated with 3-(Methylthio) Propyl Isothiocyanate/α-Cyclodextrin Inclusion Complex for Chicken Meat Preservation

The 3-(Methylthio) propyl isothiocyanate (MTPITC)-loaded inclusion complex prepared by α-cyclodextrin (α-CD) was incorporated into chitosan (CS) film to fabricate a packaging material for fresh chicken meat preservation. Scanning electron microscope images indicated homogenous dispersion of the MTPITC-α-CD in CS polymer. Fourier-transform infrared and X-ray diffraction techniques revealed that MTPITC-α-CD was incorporated into the CS film matrix by the physical interactions. The introduction of MTPITC-α-CD improved the UV-vis light-blocking ability, with a slight loss of transparency. Although the water solubility and water vapor barrier capacity were not significantly influenced by the addition of MTPITC-α-CD, the antioxidant attribute was significantly enhanced. The CS-MTPITC-α-CD film displayed obvious and sustained suppressive effects against Salmonella typhimurium, with the inhibition zone diameters of 14.7 mm at 12 h and 7.3 mm at 24 h, respectively. Moreover, the quality index analysis indicated that the CS-MTPITC-α-CD film-wrapped fresh chicken, during refrigerated storage, exhibited better preservative efficacy than the control groups, with the total viable counts of 6.5 Log CFU/g, total volatile base nitrogen of 8.4 mg/100 g, pH of 6.6, thiobarbituric acid-reactive substances of 0.2 mg/kg, and the sensory score of 5 at day 16. Collectively, these results suggest that CS-MTPITC-α-CD film is a prospective packaging candidate for delaying the quality deterioration of chicken meat.

A Bioactive Chitosan-Based Film Enriched with Benzyl Isothiocyanate/α-Cyclodextrin Inclusion Complex and Its Application for Beef Preservation

A bioactive packaging material based on chitosan (CS) incorporated with benzyl isothiocyanate (BITC) and α−cyclodextrin (α−CD) was fabricated to evaluate its preservative effects on fresh beef stored at 4 °C for 12 d according to the quality analysis. The Fourier-transform infrared (FTIR) spectrum revealed that the major structural moiety of BITC was embedded in the cavity of α−CD, except for the thiocyanate group. FTIR and X-ray diffraction analysis further verified that intermolecular interactions were formed between the BITC−α−CD and CS film matrix. The addition of BITC−α−CD decreased the UV light transmittance of pure CS film to lower than 63% but still had enough transparency for observing packaged items. The CS−based composite film displayed a sustainable antibacterial capacity and an enhanced antioxidant activity. Moreover, the total viable counts, total volatile base nitrogen, pH, thiobarbituric acid–reactive substances, and sensory evaluation of the raw beef treated with the CS−based composite film were 6.31 log colony-forming unit (CFU)/g, 19.60 mg/100 g, 6.84, 0.26 mg/kg, and 6.5 at 12 days, respectively, indicating the favorable protective efficacy on beef. These results suggested that the fabricated CS−based composite film has the application potential to be developed as a bioactive food packaging material, especially for beef preservation.

Effect of Melissa officinalis L. Essential Oil Nanoemulsions on Structure and Properties of Carboxymethyl Chitosan/Locust Bean Gum Composite Films

This study aimed to develop active films based on carboxymethyl chitosan (CMCS)/locust bean gum (LBG) films containing Melissa officinalis L. essential oil (MOEO) nanoemulsions. The results showed that the active films incorporated with MOEO nanoemulsion resulted in an increase in the elongation of break, water resistance and improved the film hydrophilicity. Elongation of break increased from 18.49% to 27.97% with the addition of 4% MOEO nanoemulsion. Water resistance was decreased from 56.32% to 25.43%, and water contact angle was increased from 75.13 to 83.86 with the addition of 4% MOEO nanoemulsion. However, the water vapor barrier properties and tensile strength decreased with the addition of MOEO nanoemulsions. The scanning electron microscopic images and Fourier transform infrared spectroscopy results showed that the MOEO was very compatible with the film materials and dispersed evenly in the films. At the same time, the addition of MOEO nanoemulsion significantly enhanced antioxidant and antibacterial activities of C/L-MOEO films. The antioxidant and antimicrobial activities of C/L-MOEO films were increased from 7.16% to 33.81% and 3.52% to 54.50%, respectively. In general, C/L-MOEO film has great application prospects.

Topical Dosage Formulation of Lyophilized Philadelphus coronarius L. Leaf and Flower: Antimicrobial, Antioxidant and Anti-Inflammatory Assessment of the Plant

Philadelphus coronarius is a versatile plant and its use in folk medicine has a long tradition; however, scientifically, the medical utilization of the herb is a less explored research field. The aim of our study was to identify and determine the quantity of the bioactive compounds of both the leaf and the flower and prepare a lyophilized product of them, from which medical ointments were formulated, since the topical application of P. coronarius has also not been studied. In vitro drug release, texture analysis and biocompatibility experiments were carried out, as well as the investigation of microbiological, antioxidant and anti-inflammatory properties. According to our results the composition and the selected excipients of the ointments have a great impact on the drug release, texture and bioavailability of the preparation. During the microbiological testing, the P. coronarius leaf was effective against Escherichia coli and Staphylococcus aureus, but it did not significantly decrease IL-4 production when it was tested on HaCaT cells. P. coronarius is a promising herb, and its topical application in antimicrobial therapy can be a useful addition to modern medical therapy.

Biochemical Characterization of Some Varieties of Apricot Present in the Vesuvius Area, Southern Italy

The witnesses of the millenary history of Campania felix in southern Italy highlighted that several fruit and vegetables cultivated in such territory could potentially be a treasure trove of important health elements. Our work evaluated the content of β-carotene, ascorbic acid, and total phenolics and the antioxidant activity of ten typical varieties of apricots cultivated in the Vesuvius area in the Campania region. The total polyphenols varied between 10.24 and 34.04 mg/100 g of a fresh sample. The amount of ascorbic acid also varied greatly, ranging from 2.65 to 10.65 mg/100 g of a fresh product. B-Carotene reached values up to 0.522 mg/100 g of the fresh sample. The correlation analysis performed, accounting for these parameters, showed that the antioxidant activity, calculated by 2,2-diphenyl-1-picrylhydrazyl (DPPH assay) and azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) tests, was influenced mainly by the content of total polyphenols, with ρ = −0.762 and ρ = 0.875 when we considered DPPH and ABTS tests, respectively, slightly less by the content of ascorbic acid, and not by β-carotene. The dendrogram clustered eight varieties into two main groups; on the other hand, two varieties (“Vitillo” and “Preveta bella”) seemed hierarchically distant. The gas chromatography–mass spectrometry (GC–MS) analysis of volatile organic compounds (VOCs), herein performed for the first time, demonstrated the influence of the varieties on the VOC profiles, both from a qualitative and semiquantitative perspective, discriminating the varieties in different clusters, each of which was characterized by specific notes. α-Terpinolene was the only terpene identified by GC–MS that appeared to affect the antioxidant activity.

Effect of mung bean protein isolate/pullulan films containing marjoram (Origanum majorana L.) essential oil on chemical and microbial properties of minced beef meat

In this study, the effect of marjoram essential oil (MEO) on the mechanical, barrier, antioxidant and antimicrobial properties of mung bean protein isolate (MPI)/pullulan (PU) composite films and its influence on the quality of minced beef meat during 14 days storage at 4 °C was studied. The Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM) results confirmed the compatibility between components. Also, depend on the different ratios of combination of MEO and MPI/PU, tensile strength (TS) and elongation at break (EAB) were varied. The results showed that an increase in the level of the MPI led to a significant increment in TS and water-proof properties of the composite films. Also, with addition of MEO, the EAB of the antimicrobial blend-films was decreased, while TS and water-proof properties were increased. In addition, enrichment of the films with MEO led to a considerable positive effect on DPPH radical scavenging and antibacterial activity against pathogenic bacteria (Staphylococcus aureus and Escherichia coli). Based on the bacterial and chemical analyses of the minced meat samples, MEO-incorporation in MPI/PU films enhanced oxidative stability of minced beef samples, and also showed effective antimicrobial activity against all of the tested bacteria.

Polylactide Films with the Addition of Olive Leaf Extract-Physico-Chemical Characterization

The aim of this work was to obtain and characterize polylactide films (PLA) with the addition of poly(ethylene glycol) (PEG) as a plasticizer and chloroformic olive leaf extract (OLE). The composition of OLE was characterized by LC-MS/MS techniques. The films with the potential for using in the food packaging industry were prepared using a solvent evaporation method. The total content of the phenolic compounds and DPPH radical scavenging assay of all the obtained materials have been tested. Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (FTIR-ATR) allows for determining the molecular structure, while Scanning Electron Microscopy (SEM) indicated differences in the films' surface morphology. Among other crucial properties, mechanical properties, thickness, degree of crystallinity, water vapor permeation rate (WVPR), and color change have also been evaluated. The results showed that OLE contains numerous active substances, including phenolic compounds, and PLA/PEG/OLE films are characterized by improved antioxidant properties. The OLE addition into PLA/PEG increases the material crystallinity, while the WVPR values remain almost unaffected. From these studies, significant insight was gained into the possibility of the application of chloroform as a solvent for both olive leaf extraction and for the preparation of OLE, PLA, and PEG-containing film-forming solutions. Finally, evaporation of the solvent from OLE can be omitted.

Chitosan nanoparticles encapsulating lemongrass (Cymbopogon commutatus) essential oil: Physicochemical, structural, antimicrobial and in-vitro release properties

This study was aimed to encapsulate lemongrass (Cymbopogon commutatus) essential oil (LGEO) into chitosan nanoparticles (CSNPs) and to investigate their physicochemical, morphological, structural, thermal, antimicrobial and in-vitro release properties. CSNPs exhibited spherical morphology with an average hydrodynamic size of 175-235 nm. Increasing EO loading increased the average size of CSNPs from 174 to 293 nm (at CS:EO ratio from 1:0 to 1:1.25). SEM and AFM confirmed the results obtained by hydrodynamic size indicating that EO loading led to formation of large aggregated NPs. The successful physical entrapment of EO within NPs was shown by fourier-transform infrared spectroscopy. X-ray diffractogram of loaded-CSNPs compared to non-loaded CSNPs exhibited a broad high intensity peak at 2θ = 19-25° implying the entrapment of LGEO within CSNPs. Thermogravimetric analysis (TGA) showed that encapsulated EO was decomposed at a temperature of 252 °C compared to a degradation temperature of 126 °C for pure LGEO, indicating a two-fold enhancement in thermal stability of encapsulated CSNPs. Differential scanning calorimetry also proved the physical entrapment of EO into polymeric matrix of chitosan. In-vitro release study showed a time- and pH-dependent release of EO into release media demonstrating a three-stage release behavior with a rapid initial release of EO, followed by a steady state migration of EO from its surrounding envelope at the later stages. Antimicrobial assay showed strong antimicrobial properties of free form of LGEO against the bacteria (both gram positive and gram negative) and fungi species tested. Moreover, loaded-CSNPs exhibited stronger antibacterial and anti-fungal activities than non-loaded CSNPs.

Chitosan/Polyvinyl Alcohol/Tea Tree Essential Oil Composite Films for Biomedical Applications

Tissue engineering is crucial, since its early adoption focused on designing biocompatible materials that stimulate cell adhesion and proliferation. In this sense, scaffolds made of biocompatible and resistant materials became the researchers’ focus on biomedical applications. Humans have used essential oils for a long time to take advantage of their antifungal, insecticide, antibacterial, and antioxidant properties. However, the literature demonstrating the use of essential oils for stimulating biocompatibility in new scaffold designs is scarce. For that reason, this work describes the synthesis of four different film composites of chitosan/polyvinyl alcohol/tea tree (Melaleuca alternifolia), essential oil (CS/PVA/TTEO), and the subdermal implantations after 90 days in Wistar rats. According to the Young modulus, DSC, TGA, mechanical studies, and thermal studies, there was a reinforcement effect with the addition of TTEO. Morphology and energy-dispersive (EDX) analysis after the immersion in simulated body fluid (SBF) exhibited a light layer of calcium chloride and sodium chloride generated on the material’s surface, which is generally related to a bioactive material. Finally, the biocompatibility of the films was comparable with porcine collagen, showing better signs of resorption as the amount of TTEO was increased. These results indicate the potential application of the films in long-term biomedical needs.