Green antimicrobial adsorbent containing grafted xanthan gum/SiO2 nanocomposites for malachite green dye

Anticancer and antimicrobial potential of novel xanthan gum derivatives synthesized via quaternary ammonium grafting

Two new xanthan gum derivatives were synthesized by a Schiff base reaction with quaternary ammonium salts (PYB: 1-(2-aminoethyl) pyridinium bromide and TAB: 1-(2-aminoethyl) trimethylammonium bromide) to grant biological properties. The quaternary ammonium salts were synthesized through a quaternization reaction between trimethylamine or pyridine, and 2-bromoethylamine hydrobromide, obtaining two quaternary ammonium salts with a NH₂ group, which were chemically grafted onto the aldehyde groups of xanthan gum (XG) previously oxidized with sodium periodate. FTIR-ATR and 1H NMR confirmed the chemical structures of the XG derivatives (XG-PYB and XG-TAB). Additionally, TGA analyzed thermal stability. Antiproliferative activity in breast cancer cells (MCF-7) through a cell proliferation assay (MTT) was tested, and the antibacterial activity through microbial challenge tests on Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), and Pseudomonas aeruginosa (P. aeruginosa) were assessed. The minimum inhibitory concentration (MIC) and SYTOX Green assay on E. coli and S. aureus were also conducted, demonstrating that XG-TAB is the most promising molecule, as it showed greater thermal stability, decreased cancer cell viability, and almost completely inhibited bacterial growth of E. coli ATCC 11229 and S. aureus ATCC 6538, respectively by damage in plasmatic membrane. Furthermore, the biocompatibility of both derivatives was evaluated, showing no toxic effect on human-blood erythrocytes.

Decolorization of cationic dyes methyl violet 2B and malachite green via a heterogeneous Fenton-like process using a novel magnetic zeolite-xanthan gum composite

Heterogeneous Fenton-like oxidation is an efficient method for dye decolorization, and the development of effective catalyst plays a crucial role in enhancing its performance. In this study, a novel magnetic catalyst (m-XG-Zeo) was synthesized from Fe₃O₄, xanthan gum, and zeolite for the decolorization of methyl violet 2B (MV-2B) and malachite green (MG). The catalyst was characterized using XRD, SEM, EDS, BET, FTIR, TGA, ICP-OES, and zeta potential analysis. The reaction parameters, including pH, hydrogen peroxide concentration, catalyst dosage, initial dye concentration, reaction time, temperature, and ionic strength were investigated. Kinetic studies were also performed. The results showed that MV-2B and MG decolorization efficiencies reached 83.4 % and 96.7 %, respectively, at 1 g/L m-XG-Zeo amount, 20 mg/L initial dye concentration, pH 6, 20 °C, 0.0236 M H2O2 concentration, and a reaction time of 10-min. While the catalyst demonstrated high efficiency in dye decolorization, chemical oxygen demand removal was minimal, highlighting a limitation of the process. Kinetic analysis indicated that the decolorization of MV-2B and MG followed an endothermic reaction with low activation energy. The findings suggest that m-XG-Zeo is a promising catalyst for Fenton-like oxidation, with potential applications in wastewater treatment, though further improvements are needed to enhance organic mineralization.

The efficient chitosan-polythiophene-graphene oxide bionanocomposite with enhanced antibacterial activity, dye adsorption ability, mechanical and thermal properties

Water pollution is the most serious environmental issues due to toxic impurity such as dye and pathogenic microorganisms. The main goal of the present study is to produce a novel ternary chitosan-polythiophene-graphene oxide (CS-PTh-GO) bionanocomposites using the intercalation of GO into CS through solution mixing process followed by the in-situ polymerization of thiophene for removal of dye and killing microorganisms from an aqueous solution. The fabricated CS-PTh-GOs were characteristically examined via FTIR, XRD, SEM, TEM, TGA, tensile analysis and subsequently applied for adsorption of cationic dyes such as methylene blue (MB) in the dark or under light and killing the growth of Gram-positive and Gram-negative microorganisms. The data revealed that presence of PTh-GO enhanced the surface roughness, tensile strength, thermal stability, adsorption characteristics and antibacterial activity. The CS-PTh-GO showed 97% dye removal of MB in 50 min. Ultimately, the CS-PTh-GO bionanocomposites analysis against the growth of Staphylococcus aureus, and Escherichia coli manifesting a minimum inhibitory concentration (MIC) of 5 µg/mL, respectively. Thus, the CS-PTh-GO bionanocomposite has the potential to use as an efficient adaptable antimicrobial and dye absorbent of organic dyes in industrial wastewater.

Synthesis of potential adsorbent for removal of malachite green dye using alginate hydrogel nanocomposites

Hydrogels are highly porous, hydrophilic, insoluble, 3D networks with a large capacity for water absorption. The goal of this research was to formulate sodium alginate/silica (SA/SiO2) hydrogel and hydrogel nanocomposite (SA/SiO2/ZnO-NPs) by impregnating the ZnO-NPs and cross-linking was furnished with siloxane network making use of the sol-gel method. The synthesized hydrogel/hydrogel nanocomposite was analyzed with Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Zeta-sizer, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and thermo-gravimetric analyzer (TGA). Using the batch adsorption method, the hydrogel/hydrogel nanocomposite was examined for the ability to adsorb malachite green (MG) dye from aqueous media under different conditions like adsorbent dosage, contact time, pH and temperature. MG's maximum removal (97.31 %) was achieved by SA/SiO2/ZnO-NPs adsorbent at pH = 8; the temperature was recorded as 333 K, utilizing 25 min at a dose level of 0.09 g. Langmuir and Temkin's models were utilized to assess the adsorption mechanism, and the maximum adsorption capacity (qmax) of 227.27 mg/g for SA/SiO2 hydrogel and 322.58 mg/g for SA/SiO2/ZnO-NPs hydrogel nanocomposite was obtained. At pH 8, the optimal adsorption was taken place in 25 min. The pseudo-second-order kinetic model deals with the adsorption process, and thermodynamic data reveals the endothermic and spontaneous nature of the adsorption process. The presence of -COOH groups in the synthesized hydrogel/hydrogel nanocomposite improved the cationic dye affinity towards hydrogel/hydrogel nanocomposite through H-bonding and electrostatic interactions. Thus, SA/SiO2 hydrogel and SA/SiO2/ZnO hydrogel nanocomposite could be efficient and promising adsorbents to deal with organic dye pollutants for a sustainable environment. Moreover, addressing the limitations such as SA and ZnO exhibit sensitivity to alterations in pH which could potentially influence the performance in practical scenarios where pH regulation is not maintained.

Monte Carlo, molecular dynamic, and experimental studies of the removal of malachite green using g-C3N4/ZnO/Chitosan nanocomposite in the presence of a deep eutectic solvent

Deep-eutectic solvents (DES) have emerged as promising candidates for preparing nanocomposites. In this study, a DES-based graphitic carbon nitride (g-C3N4)/ZnO/Chitosan (Ch) nanocomposite was synthesized to remove malachite green (MG) dye from water. The DES was prepared by mixing and heating citric acid as a hydrogen bond acceptor and lactic acid as a hydrogen bond donor. This is the first report of the removal of MG using DES-based nanocomposites. Experiments on kinetics and isothermal adsorption were conducted to systematically explore the adsorption performances of nanocomposite toward dye. At 25 °C, the highest adsorption performance was obtained with alkaline media (>90 % removal). The greatest adsorption capacity (qm) was 59.52 mg g-1 at conditions (30 mg L-1 MG solution, pH 9, 3 mg nanocomposite per 10 mL of MG solution, 25 °C, 150 rpm, and 150 min) based on the calculation from the best-fitting isotherm model (Langmuir). The adsorption process was most appropriately kinetically described by the PSO model. The Monte Carlo (MC) and molecular dynamic (MC) results are correlated with experimental findings to validate the theoretical predictions and enhance the overall understanding of the adsorption process. Electronic structure calculations reveal the nature of interactions, including hydrogen bonding and electrostatic forces, between the nanocomposite and MG molecules.

Novel high-efficient adsorbent based on modified gelatin/montmorillonite nanocomposite for removal of malachite green dye

Shortage of drinking water has gained potential interest over the last few decades. Discharged industrial effluent, including various toxic pollutants, to water surfaces is one of the most serious environmental issues. The adsorption technique has become a widely studied method for the removal of toxic pollutants, specifically synthetic dyes, from wastewater due to its cost-effectiveness, high selectivity, and ease of operation. In this study, a novel gelatin-crosslinked-poly(acrylamide-co-itaconic acid)/montmorillonite (MMT) nanoclay nanocomposites-based adsorbent has been prepared for removing malachite green (MG) dye from an aqueous solution. Modified gelatin nanocomposites were synthesized using a free-radical polymerization technique in the presence and absence of MMT. Various analytical instrumentation: including FTIR, FESEM, XRD, and TEM techniques were used to elucidate the chemical structure and surface morphology of the prepared samples. Using a batch adsorption experiment, Langmuir isotherm model showed that the prepared modified gelatin nanocomposite had a maximum adsorption capacity of 950.5 mg/g using 350 mg/L of MG dye at pH 9 within 45 min. Furthermore, the regeneration study showed good recyclability for the obtained nanocomposite through four consecutive reusable cycles. Therefore, the fabricated gelatin nanocomposite is an attractive adsorbent for MG dye elimination from aqueous solutions.

Synthesis and characterizations of super adsorbent hydrogel based on biopolymer, Guar Gum-grafted-Poly (hydroxyethyl methacrylate) (Gg-g-Poly (HEMA)) for the removal of Bismarck brown Y dye from aqueous solution

Chemical modification of guar gum was done by graft copolymerization of monomer hydroxyethyl methacrylate (HEMA) using azobisisobutyronitrile (AIBN) as initiator. Optimal reaction parameters were settled by varying one reaction condition and keeping the other constant. The optimum reaction conditions worked out were solvent system: binary, [H2O] = 15.00 mL, [acetone] = 5.00 mL, [HEMA] = 82.217× 10-2 mol/L, [AIBN] = 3.333 × 10-2 mol/L, reaction time = 3 h, reaction temperature = 60 °C on to 1.00 g guar gum with Pg = 1694.6 and %GE = 68,704.152. Pure guar gum polymer and grafts were analyzed by several physicochemical investigation techniques like FTIR, SEM, XRD, EDX, and swelling studies. Percent swelling of the guar gum polymer and grafts was investigated at pH 2.2, 7.0, 7.4 and 9.4 concerning time. The finest yield of Ps was recorded at pH 9.4 with time 24 h for graft copolymer. Guar gum and grafted samples were explored for the sorption of toxic dye Bismarck brown Y from the aqueous solution with respect to variable contact time, pH, temperature and dye concentration so as to investigate the stimuli responsive sorption behaviour. Graft copolymers showed better results than guar gum with percent dye uptake (Du) of 97.588 % in 24 h contact time, 35 °C temperature, 9.4 pH at 150.00 ppm dye feed concentration as compared to Guar gum which only showed 85.260 % dye uptake at alike dye fed concentration. The kinetic behaviour of the polymeric samples was evaluated by applying many adsorption isotherms and kinetic models. The value of 1/n was between 0 → 1 showing that there was physisorption of the BB dye that took place on the surface of the polymers. Thermodynamics of BB Y adsorption onto hydrogels was investigated concerning the Van't Hoff equation. -∆G° values obtained from the curve proved the spontanity of the process. Within the context of adsorption efficiency, an investigation was conducted to examine the process of sorption of Bismarck brown Y dye from aqueous solutions. The graft copolymers demonstrated remarkable adsorption abilities, achieving a dye uptake (Du) of 97.588 % over a 24-h period at a temperature of 35 °C, pH level of 9.4, and a dye concentration of 150.00 ppm. The raised adsorption capacity was additionally corroborated by the application of several adsorption isotherms and kinetic models, which indicated that physisorption is the prevailing process/mechanism. Additionally, the thermodynamic research, utilising the Van't Hoff equation, validated the spontaneity of the adsorption phenomenon, as evidenced by the presence of a negative ∆G° values. The thermodynamic analysis revealed herein establishes a strong scientific foundation for the effectiveness of adsorbent composed of graft copolymers based on guar gum. The research conclude the efficiency of the guar gum based grafted copolymers for the water remediation as efficient adsorbents. The captured dye can be re-utilised and the hydrogels can be used for the same purpose in number of cycles.

Enhanced Photocatalytic Degradation of Malachite Green Dye Using Silver-Manganese Oxide Nanoparticles

Efficient and excellent nanoparticles are required for the degradation of organic dyes in photocatalysis. In this study, silver-manganese oxide nanoparticles (Ag-Mn-NPs) were synthesized through a wet chemical precipitation method and characterized as an advanced catalyst that has enhanced photocatalytic activity under sunlight irradiation. The nanoparticles were characterized using scanning electron microscopy (SEM), XRD, UV-vis light spectra, and energy-dispersive X-ray (EDX) spectroscopy, revealing their spherical and agglomerated form. The EDX spectra confirmed the composition of the nanoparticles, indicating their presence in oxide form. These bimetallic oxide nanoparticles were employed as photocatalysts for the degradation of malachite green (MG) dye under sunlight irradiation in an aqueous medium. The study investigated the effects of various parameters, such as irradiation time, catalyst dosage, recovered catalyst dosage, dye concentration, and pH, on the dye's photodegradation. The results showed that Ag-Mn oxide nanoparticles exhibited high photocatalytic activity, degrading 92% of the dye in 100 min. A longer irradiation time led to increased dye degradation. Moreover, a higher catalyst dosage resulted in a higher dye degradation percentage, with 91% degradation achieved using 0.0017 g of the photocatalyst in 60 min. Increasing the pH of the medium also enhanced the dye degradation, with 99% degradation achieved at pH 10 in 60 min. However, the photodegradation rate decreased with increasing dye concentration. The Ag-Mn oxide nanoparticles demonstrate excellent potential as a reliable visible-light-responsive photocatalyst for the efficient degradation of organic pollutants in wastewater treatment.

Versatile CO2-responsive Sponges Decorated with ZIF-8 for Bidirectional Separation of Oil/Water and Controllable Removal of Dyes

The complex wastewater containing water-soluble dyes and water-insoluble oils has given rise to significant environmental concerns that demand urgent remediation. Herein, a novel "smart" multifunctional sponge (ZIF-8@PMS) stepwise decorated with ZIF-8 nanoparticles and CO2-responsive copolymer (poly(2-(diethylamino) ethyl methacrylate-co-3-(trimethoxysilyl)propyl acrylate-co-stearyl methacrylate) was successfully prepared for CO2 controllable oil/water separation and dyes removal. The results revealed that the sponge coated with CO2-responsive copolymer for three cycles (ZIF-8@PMS-3) exhibited optimal comprehensive properties. The ZIF-8@PMS-3 had excellent compressive-resilient characteristics and chemical stability. As expected, it displayed tunable wettability and charged state under the regulation of CO2. Based on these features, ZIF-8@PMS-3 presented highly efficient removal of oil and dyes, even for the dye-containing oil/water emulsions, via a synergistic combination of adsorption and separation methods. The adsorption capacity for oil and various organic solvents ranged from 21.3 to 50 g g-1. The maximum adsorption capacities toward anionic dyes: methyl orange with 1205.89 mg g-1 and methyl blue with 880.00 mg g-1 in the presence of CO2 through electrostatic interaction. In the absence of CO2, it achieved maximum adsorption capacities for cationic dyes, including malachite green with 1246.15 mg g-1 and rhodamine B with 203 mg g-1, primarily driven by π-π interactions. According to distinct adsorption mechanisms, ZIF-8@PMS-3 could selectively adsorb either anionic or cationic dyes by exploiting CO2 as a trigger. Furthermore, the separation efficiencies for both types of oil/water emulsions surpassed 99.9%, with respective fluxes of 1566.99 L m-2 h-1 (water-in-oil emulsion) and 310.37 L m-2 h-1 (oil-in-water emulsion). Additionally, the as-prepared sponges exhibited remarkable antibacterial properties and exceptional recyclability. Therefore, the ZIF-8@PMS-3 holds substantial promise for potential applications in practical industrial wastewater treatment.

A State-of-Art Review of the Metal Oxide-Based Nanomaterials Effect on Photocatalytic Degradation of Malachite Green Dyes and a Bibliometric Analysis

A wide range of hard contaminants in wastewater is generated from different industries as byproducts of the organic compound. In this review, various metal oxide-based nanomaterials are employed for the photocatalytic removal of malachite green (MG) dye from wastewater. Some cost-effective and appropriate testing conditions are used for degrading these hard dyes to get higher removal efficiency. The effects of specific parameters are considered such as how the catalyst is made, how much dye is in the solution at first, how much nanocatalyst is needed to break down the dye, the initial pH of the dye solution, the type of light source used, the year of publications, and how long the dye has to be exposed to light to be removed. This study suggests that Scopus-based core collected data employ bibliometric methods to provide an objective analysis of global MG dye from 2011 to 2022 (12 years). The Scopus database collects all the information (articles, authors, keywords, and publications). For bibliometric analysis, 658 publications are retrieved corresponding to MG dye photodegradation, and the number of publications increases annually. A bibliometric study reveals a state-of-art review of metal oxide-based nanomaterials' effects on photocatalytic degradation of MG dyes (12 years).

Dual-functional marine algal carbon-based materials with highly efficient dye removal and disinfection control

The design and simple, green preparation of dual-functional materials for the decontamination of both hazardous dyes and pathogenic microorganisms from wastewater remain challenging currently. Herein, a promising marine algal carbon-based material (named C-SA/SP) with both highly efficient dye adsorptive and antibacterial properties was fabricated based on the incorporation of sodium alginate and a low dose of silver phosphate via a facile and eco-friendly approach. The structure, removal of malachite green (MG) and congo red (CR), and their antibacterial performance were studied, and the adsorption mechanism was further interpreted by the statistical physics models, besides the classic models. The results show that the maximum simulated adsorption capacity for MG reached 2798.27 mg/g, and its minimal inhibit concentration for Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) was 0.4 mg/mL and 0.2 mg/mL, respectively. The mechanistic study suggests that silver phosphate exerted the effects of catalytic carbon formation and pore formation, while reducing the electronegativity of the material as well, thus improving its dye adsorptive performance. Moreover, the MG adsorption onto C-SA/SP showed vertical orientation and a multi-molecular way, and its adsorption sites were involved in the adsorption process with the increase of temperature. Overall, the study indicates that the as-made dual-functional materials have good applied prospects for water remediation.

Agricultural waste to real worth biochar as a sustainable material for supercapacitor

Biochar made from agricultural waste is gaining more attention in energy field due to its sustainability, low cost, apart from having high supercapacitance performance. Also, it has a wide range of environmental applications, including wastewater treatment, upgrading soil fertility, contaminant immobilization, and in situ carbon sequestration. The existing thermo-chemical methodologies for converting agricultural waste into a sustainable material i.e. biochar and the role of activation agents in enhancing the performance of these materials were critically analyzed and discussed. An overview of recent trends in agricultural waste-derived biochar for supercapacitor electrodes is highlighted in this review that emphasizes green circular economy for encouraging net-zero utility of agriculture waste biomass. The roles of various newly prepared "green" electrolytes in reducing the negative consequences of supercapacitor is also reviewed. The trashing of agricultural waste and the depletion of energy supplies has become a global concern, hurting the world's ecosystem and economy through pollution and a fuel crisis and hence the concept of a green circular economic model is also highlighted.

Synthesis of porous hydroxysodalite from aluminosilicate rich clay soils: application towards fluoride and pathogen removal

This article discussed the potential application of hydrothermally synthesized porous hydroxysodalite material synthesized from aluminosilicate clay material as a multifunctional adsorbent for fluoride and pathogen removal from groundwater. The efficiency of the material towards fluoride removal was evaluated using batch experiments while the efficacy against the E. coli strain was evaluated using well-assay diffusion method. The material showed a maximum fluoride adsorption capacity of 6.01 mg/g at initial concentration range of 5 to 100 mg/L when 1 g/100 mL adsorbent dosage was used at initial pH of 6 ± 0.5 after agitation time of 10 min. The adsorption kinetics data fitted better to pseudo first order of reaction kinetics indicating the dominance of physiosorption adsorption mechanism while the adsorption isotherm data showed better fit to both Langmuir and Freundlich adsorption isotherm model confirming monolayer and multilayer adsorption. The material was successfully regenerated and reused for up to eight successive regeneration-reuse cycles. However, its efficiency was inhibited by the presence of Cl^- and CO₃^2-. The material also proven to have antimicrobial activity against E. coli strain. This study concluded that the porous hydroxysodalite material prepared in this study can be used as a multifunctional adsorbent for fluoride and pathogen removal from groundwater.

Rational construction and understanding the effect of metal cation substitution of three novel ternary Zn-Co-Ni-LDHs from 2D to 3D and its enhanced adsorption properties for MO

The layered double hydroxides (LDHs) have attracted attention in the water treatment field. In this paper, three novel ternary Zn-Co-Ni-LDH adsorbents were prepared successfully through rational construction from 2D to 3D using triethanolamine (TEA) as an alkali source and a structural controlling reagent by hydrothermal technique. Samples were characterized by the SEM, XRD, XPS, FTIR, BET, solid-state UV/vis spectra, and TG. Three Zn-Co-Ni-LDHs exhibited higher crystallinity and surface area which were beneficial to the adsorption for methyl orange (MO). The maximum adsorption capacity of three Zn-Co-Ni-LDH adsorbents can even reach as high as 1871.65 mg·g^-1, 1799.56 mg·g^-1, and 1646.44 mg·g^-1 for MO, respectively, which surpass those of most previously reported LDH-based adsorbents. The pseudo-second-order kinetic equation fitted the kinetic data of adsorption, while the equilibrium adsorption isotherm data followed the Langmuir model. The adsorption mechanism, electrochemical, and the antibacterial properties of three Zn-Co-Ni-LDHs were also discussed. This results not only demonstrates that three Zn-Co-Ni-LDHs are practical interest as an efficient adsorbent for the removal of MO from dye waste water, but also provides a strategy for the rational design through three ternary Zn-Co-Ni-LDHs from 2D to 3D.

Simultaneously enhanced stability and biological activities of chlorogenic acid by covalent grafting with soluble oat β-glucan

Chlorogenic acid (CA) has a wide range of biological activities but the chemical structure is extremely unstable. In this study, CA was grafted onto a soluble oat β-glucan (OβGH) to improve the stability. Although the crystallinity and thermal stability of CA-OβGH conjugates reduced, the storage stability of CA significantly improved. The DPPH and ABTS scavenging ability of CA-OβGH IV (graft ratio 285.3 mg CA/g) were higher than 90 %, which is closed to activities of equivalent concentration of Vc (93.42 %) and CA (90.81 %). The antibacterial abilities of CA-OβGH conjugates are improved compared to the equivalent content of CA and potassium sorbate. Particularly, the inhibition rate of CA-OβGH for gram-positive bacteria (Staphylococcus aureus and Listeria monocytogenes) are significantly higher than that of gram-negative bacteria (Escherichia coli). The results demonstrated that covalent grafted CA with soluble polysaccharide is an effective strategy to enhance its stability and biological activities.

A dual-functional sulfone biscompound containing 1,2,3-triazole moiety for decolorization and disinfection of contaminated water

Water decontamination from toxic dyes and pathogenic microorganisms is critical for life on Earth. Herein, we report the synthesis of sulfone biscompound containing 1,2,3-triazole moiety and evaluation of its dye decolorization and biocidal and disinfection efficiencies. The decolorization efficiency was tested under different experimental conditions, while the biocidal action was examined against various types of waterborne pathogens, and the disinfection of some pathogenic microbes was executed in artificially contaminated water. The findindgs illustrated that the solution initial pH (pHi) affected the decolorization efficiency significantly. About complete removal of 10 mg/L malachite green (MG) dye was achieved after 10 min using 3 g/L of the sulfone biscompound at pHi 6. The pseudo-second-order equation suited the adsorption kinetics accurately, while the equilibrium data was suited by Langmuir isotherm model. Electrostatic, n-π, and π-π interactions brought about the adsorption of MG onto the sulfone biscompound. The biocidal results indicated that the sulfone biscompound had a powerful antibacterial potential against the tested bacterial species. Likewise, the distinction trail revealed that after 70-90 min of direct contact with an effective dose, the tested pathogens could be completely eliminated (6-log reduction). Overall, the newly synthesized sulfone biscompound can efficiently remove cationic dyes and disinfect contaminated water.

Synthesis, characterization, anticancer, and antioxidant activities of chitosan Schiff bases bearing quinolinone or pyranoquinolinone and their silver nanoparticles derivatives

In this work, new chitosan-based Schiff bases were synthesized by the reaction of chitosan with quinolinone and pyranoquinolinone giving CSQ, and CSP, respectively. The novel Chitosan Schiff bases were grafted on silver nanoparticles providing CSQ/Ag, CSP/Ag structures. Characterization of isolated compounds was carried out by FT-IR, TGA, XRD, SEM, and TEM. The target compounds CSQ, CSP, CSQ/Ag, and CSP/Ag were evaluated as antitumor agents against three cancer cell lines, liver (HepG-2), colon (HCT-116), and breast (MCF-7). Compound CSQ/Ag disclosed potent cytotoxic effect with IC50 values in the range of 41.9–55.1 μg/ml in comparison with 5-fluorouracil against different cancer cell lines. Besides, the antioxidant activity of chitosan and its quinolinone and pyranoquinolinone analogues was assessed as radical scavengers versus 1,1-diphenyl-2-picrylhydrazyl radicals (DPPH%). The compound CSQ/Ag emerged as the most active member in scavenging the DPPH radicals. The obtained findings proved that the new Schiff bases/silver nanoparticles of chitosan showed higher antiproliferative and antioxidant activities than the blank CS and would be highly applicable in biomedical fields.

Graphical abstract

Removal of phenol from aqueous solution using reduced graphene oxide as adsorbent: isotherm, kinetic, and thermodynamic studies

This work focuses on the batch adsorption study of phenol from an aqueous solution. Here, reduced graphene oxide (RGO) is used as an adsorbent. To synthesize reduced graphene oxide from graphene oxide, hydrazine monohydrate is used as a reducing agent. The synthesized samples were characterized using SEM, EDX, XRD, FTIR, BET surface area analyzer, RAMAN spectra, and zeta potential. The effects of solution pH, adsorption time, temperature, adsorbent dosage, and initial phenol concentration on adsorption characteristics were systematically studied. The optimized adsorption parameters were 0.4 g/L of adsorbent dosage, pH of 8.0, adsorption time 75 min, and temperature of 30 °C. The adsorption isotherm data follows the Langmuir isotherm model, and the maximum adsorption capacity (q_m) was 602.41 mg/g. The kinetic data of the adsorption follows the pseudo-second-order kinetic model. The Boyd model confirmed that film diffusion was the rate-limiting step in the adsorption process. The thermodynamic study of phenol adsorption using RGO confirms the endothermic nature of the process. The negative values of Gibb's free energy (ΔG^o) confirm that the process was spontaneous. The positive value of change in entropy (ΔS^o = 346.885 J/K) suggests that the randomness was increased at the solution/solid interface. The most important feature of this adsorbent was it could be easily and efficiently regenerated from phenol-loaded adsorbent with a negligible effect on removal efficiency. This study evidenced an effective use of RGO as an adsorbent for phenol removal.

Graphene-derived antibacterial nanocomposites for water disinfection: Current and future perspectives

Antimicrobial nanomaterials provide numerous opportunities for the synthesis of next-generation sustainable water disinfectants. Using the keywords graphene and water disinfection and graphene antibacterial activity, a detailed search of the Scopus database yielded 198 and 1433 studies on using graphene for water disinfection applications and graphene antibacterial activity in the last ten years, respectively. Graphene family nanomaterials (GFNs) have emerged as effective antibacterial agents. The current innovations in graphene-, graphene oxide (GO)-, reduced graphene oxide (rGO)-, and graphene quantum dot (GQD)-based nanocomposites for water disinfection, including their functionalization with semiconductor photocatalysts and metal and metal oxide nanoparticles, have been thoroughly discussed in this review. Furthermore, their novel application in the fabrication of 3D porous hydrogels, thin films, and membranes has been emphasized. The physicochemical and structural properties affecting their antibacterial efficiency, such as sheet size, layer number, shape, edges, smoothness/roughness, arrangement mode, aggregation, dispersibility, and surface functionalization have been highlighted. The various mechanisms involved in GFN antibacterial action have been reviewed, including the mechanisms of membrane stress, ROS-dependent and -independent oxidative stress, cell wrapping/trapping, charge transfer, and interaction with cellular components. For safe applications, the potential biosafety and biocompatibility of GFNs in aquatic environments are emphasized. Finally, the current limitations and future perspectives are discussed. This review may provide ideas for developing efficient and practical solutions using graphene-, GO-, rGO-, and GQD-based nanocomposites in water disinfection by rationally employing their unique properties.

Amino-functionalized NH2-MIL-125(Ti)-decorated hierarchical flowerlike Znln2S4 for boosted visible-light photocatalytic degradation

Developing novel heterojunction photocatalysts with visible-light response and remarkable photocatalytic activity have been verified to applying for the photodegradation of antibiotics in water environment. Herein, NH₂-MIL-125(Ti) was integrated with flowerlike ZnIn₂S₄ to construct NH₂-MIL-125(Ti)@ZnIn₂S₄ heterostructure using a one-pot solvothermal method. The photocatalytic performance was evaluated by the degradation of tetracycline (TC) under visible light illumination. The optimized NM(2%)@ZIS possesses a photodegradation rate (92.8%) and TOC removal efficiency (58.5%) superior to pristine components, which can be principally attributed to the positive cooperative effects of well-matched energy level positions, strong visible-light-harvesting capacity, and abundant coupling interfaces between the two. Moreover, the probable TC degradation mechanism was also clarified using the active species trapping experiments. This study inspires further design and construction of NH₂-MIL-125(Ti) and ZnIn₂S₄ based photocatalysts for effective removal of antibiotics in water environment.

Fast anisotropic growth of the biomineralized zinc phosphate nanocrystals for a facile and instant construction of laccase@Zn3(PO4)2 hybrid nanoflowers

Organic-inorganic hybrid nanoflowers (HNFs) of laccase@Zn₃(PO₄)₂ were fabricated through a facile, simple, and rapid one-step strategy. In this process, laccase was involved in nucleation and fast anisotropic growth reactions with Zn (II) and phosphate ions. The average pore size of the prepared HNFs was 54.5 nm, and its BET-specific surface area was 59.5 m² g^-1. In comparison with the free laccase, the entrapped enzyme activity in the constructed HNFs was 86.4%. In addition, the hybrid biocatalyst displayed a maximum rate of reaction (V_max) of 1640.2 ± 3.6 μmol min^-1 with respect to the native enzyme. The constructed HNFs maintained 45.1% and 60% of the original laccase activity after 12 successive reusability cycles and 30 days of storage at 4 °C, respectively. The as-obtained HNFs demonstrated a high bioremoval percentage of Direct blue-71 (94.1%) within a 10-h-treatment at 40 °C and 15 mg l^-1 of the dye concentration. The pseudo-first order and second order were the best-fitted kinetic models for the dye removal using Zn₃(PO₄)₂ nanoflakes and the fabricated HNFs, respectively. Besides, liquid chromatography-mass spectrometry (LC-MS) revealed biotransformation of the dye into less toxic metabolites as verified by testing on some bacterial strains.

Fabrication and Characterization of Xanthan Gum-cl-poly(acrylamide-co-alginic acid) Hydrogel for Adsorption of Cadmium Ions from Aqueous Medium

The present research demonstrates the facile fabrication of xanthan gum-cl-poly(acrylamide-co-alginic acid) (XG-cl-poly(AAm-co-AA)) hydrogel by employing microwave-assisted copolymerization. Simultaneous copolymerization of acrylamide (AAm) and alginic acid (AA) onto xanthan gum (XG) was carried out. Different samples were fabricated by changing the concentrations of AAm and AA. A sample with maximum swelling percentage was chosen for adsorption experiments. The structural and functional characteristics of synthesized hydrogel were elucidated using diverse characterization tools. Adsorption performance of XG-cl-poly(AAm-co-AA) hydrogel was investigated for the removal of noxious cadmium (Cd(II)) ions using batch adsorption from the aqueous system, various reaction parameters optimized include pH, contact time, temperature, and concentration of Cd(II) ions and temperature. The maximum adsorption was achieved at optimal pH 7, contact time 180 min, temperature 35 °C and cadmium ion centration of 10 mg·L-1. The XG-cl-poly(AAm-co-AA) hydrogel unveiled a very high adsorption potential, and its adsorption capacities considered based on the Langmuir isotherm for Cd(II) ions was 125 mg·g-1 at 35 °C. The Cd(II) ions adsorption data fitted nicely to the Freundlich isotherm and pseudo-first-order model. The reusability investigation demonstrated that hydrogel retained its adsorption capacity even after several uses without significant loss.