Preparation of flexible and UV-blocking films from lignin-containing cellulose incorporated with tea polyphenol/citric acid

Studies on Gelatin-Keratin-Chitosan Functionalized Silver Nanoparticles Based Bionanocomposite Films With Improved Antimicrobial and UV-Blocking Properties

This study investigates the properties of a biocomposite film made from gelatin and sustainably sourced keratin incorporating chitosan-functionalized silver nanoparticles. Varied concentrations of chitosan solution (i.e., 0.4%, 0.6%, 0.8%, and 1% w/v) were used in the synthesis of silver nanoparticles, and their particle size, distribution, and antibacterial and antifungal activities were evaluated against foodborne pathogens (Escherichia coli, Staphylococcus aureus, Rhizopus stolonifer, and Aspergillus niger). The addition of keratin enhanced the film's tensile strength to 16.64 MPa, a 403% increase compared to the gelatin film. However, incorporating 2% chitosan functionalized silver nanoparticles reduced the tensile strength to 9.07 MPa compared to the Gelatin-Keratin film. The distribution of nanoparticles and the interaction between the polymer chains were analyzed using scanning electron microscopy and Fourier transform infrared spectroscopy. The composite films also exhibited significant UV blocking efficiency, achieving 99% blockage of ultraviolet A and 100% blockage of ultraviolet B. The biocompatibility of the films was tested with MG63 cell lines, showing that silver nanoparticle concentrations (0.3%-2%) improved cell viability to 87% after 96 h of incubation. These findings reveal that the bionanocomposite films exhibit strong antibacterial and antifungal properties, along with excellent biocompatibility, making them ideal materials for wound healing and tissue engineering applications.

Stable antimicrobial emulsion prepared with quaternary ammonium lignin and cinnamaldehyde used for effective postharvest mango preservation

With the life quality improving, people's demand for fresh mango is growing rapidly, causing a higher requirement for postharvest preservation. The objective of this study was to prepare a stable and multi-functional emulsion for postharvest mango preservation with cinnamaldehyde emulsified by amphipathic quaternary ammonium kraft lignin, with an excellent dispersion performance. After vacuum freeze-drying and redissolving, no demulsification occurred of the emulsion after heating at 90 °C, the addition of NaCl, 4 cycles of freeze-thaw and 14 days of storage, while the particle size of the emulsion maintained stably in different pH conditions. The DPPH and ABTS free radical scavenging rate were 26.27 % and 95.84 %, respectively. The emulsion presented an excellent antimicrobial ability with the change of the cell membrane permeability and death of bacteria, causing by cinnamaldehyde. The respiratory action, soluble solid and titrable acids consumption of mango coated by the emulsion were inhibited to a certain extent and the freshness life was extended. The emulsion presented no affect in the growth and reproduction of L929 cells with concentration below 50 μg/mL, meanwhile, the properties of emulsion redissolved were not influenced, achieving the goal of long-term storage and transportation, showing great application potential in postharvest mango preservation.

A highly transparent cellulose film for shielding ultraviolet and high-energy visible blue light

The ultraviolet (UV) and high-energy visible blue (HEVB) light can cause damage to the eyes and skin. In this study, a cellulose composite film with UV and HEVB light shielding properties was prepared through the incorporation of a shielding agent into a carboxymethyl cellulose (CMC) solution. The shielding agent was synthesized through a Schiff base reaction between vanillin (VA) and 3-aminopropyltriethoxysilane (APS). The composite films exhibited excellent shielding performance against UV and HEVB light and maintained high visible light transmittance. Additionally, the films achieved shielding ratios of 100 % for UV (200 to 400 nm) and 93 % for HEVB (400 to 450 nm), respectively. Even under prolonged UV irradiation, the composite films maintained excellent shielding stability. The composite films exhibited higher performance in blocking UV and HEVB light than commercial shielding films. Moreover, the composite films achieved 100 % antibacterial efficiency against both Staphylococcus aureus and Escherichia coli, even with minimal amounts of the shielding agent. Furthermore, the films exhibited significant improvements in thermal stability, oxidation resistance, and mechanical properties. The multifunctional UV and HEVB shielding films have broad potential applications in food packaging, anti-UV/HEVB radiation display screens, and mobile phone screens.

Efficient fabrication of chitin-based films with high UV-blocking and fluorescence via Hantzsch reaction

As the second most abundant polysaccharide on earth, chitin-based films are promising packaging and biomedical materials. However, the lack of special function (especially UV-blocking properties and fluorescence) usually restricts their further and high-value applications. Herein, high UV-blocking and fluorescence chitin-based films were fabricated via surface modification using acetoacetation and the Hantzsch reaction. The structure and properties of the films were characterized by NMR, FTIR, fluorescence spectrum, and tensile tests. The results showed that the benzene ring and 1,4-dihydropyridine ring (DHP) were successfully grafted on the films in the mild process. Besides, the degree of substitution of DHP (DSDHP) increased with the reaction time, temperature, and substrate concentration. Moreover, the modification followed a first-order reaction at 20 °C with a rate constant of 2.1 × 10-4. When the DSDHP was over 0.029, the films exhibited 100 % UV shielding. The fluorescence spectrum demonstrated that the films had excellent solvent and temperature resistance. In addition, the films exhibited excellent mechanical strength with tensile strength up to 85.2 MPa. This work provides a facile and environmentally friendly strategy to fabricate a functional chitin-based film with potential applications in UV protection, medical packaging, and fluorescent materials.

Excellent facile fabrication of PVA and lignin nanoparticles from wheat straw after novel DES-THF pretreatment

The utilization of environmental friendly and renewable materials has received increasing attention recently. Lignin nanospheres (LNPs) prepared from recovered lignin and residual lignin after DESs and DESs-THF pretreatment were obtained by self-assembly in the present research. Then, films were prepared by incorporating them into polyvinyl alcohol (PVA) solution. The properties of various films were characterized and compared. Results showed that as the LNPs content increased, the UV blocking capacity of the films was gradually enhanced than PVA film. The DES-THF films showed better antioxidant properties up to 69 % due to higher phenolic hydroxyl content. The hydrophobicity of films incorporated with DESs-THF pretreated lignin was consistently better than that of DES pretreated. DES-THF-M films showed a higher Tmax than that of DES-M films, resulting in better thermal stability. Moreover, DES-THF-L films are lighter in color due to a lower degree of condensation, which is favorable to subsequent applications. The incorporation of LNPs improved mechanical and antioxidant properties, thermal stability, and UV shielding ability of PVA films, especially lignin after DES-THF pretreatment. In conclusion, the prepared PVA/LNPs composite films possessed good functional properties that make them potential for packaging materials.

Hydrophobic, ultraviolet radiation-shielding, and antioxidant functionalities of TEMPO-oxidized cellulose nanofibril film coated with modified lignin nanoparticles

In this study, lignin nanoparticles (LN) and octadecylamine-modified LN (LN-ODA) were utilized as coating materials to enhance the hydrophobic, antioxidant, and ultraviolet radiation-shielding (UV-shielding) properties of a TEMPO-oxidized nanocellulose film (TOCNF). The water contact angle (WCA) of the TOCNF was approximately 53° and remained stable for 1 min, while the modified LN-ODA-coated TOCNF reached over 130° and maintained approximately 85° for an hour. Pure TOCNF exhibited low antioxidant properties (4.7 %), which were significantly enhanced in TOCNF-LN (81.6 %) and modified LN-ODA (10.3 % to 27.5 %). Modified LN-ODA-coated TOCNF exhibited antioxidant properties two to six times higher than those of pure TOCNF. Modified LN-ODA exhibited thermal degradation max (Tmax) at 421 °C, while pure LN showed the main degradation temperature at approximately Tmax 330 °C. The thermal stability of TOCNF-LN-ODA-coated materials remained consistent with that of pure TOCNF, while the crystallinity index of the sample showed a slight decrease due to the amorphous nature of the lignin structure. The tensile strength of TOCNF was approximately 114.1 MPa and decreased to 80.1, 51.3, and 30.3 MPa for LN-ODA coating at 5, 10, and 15 g/m2, respectively.

A cellulose-based light-management film incorporated with benzoxazine resin/tannic acid exhibiting UV/blue light double blocking and enhanced mechanical property

Cellulose, as a biomass resource, has attracted increasingly attention and extensive research by virtue of its widely sources, ideal degradability, good mechanical properties and easy modification due to its rich hydroxyl groups. Nevertheless, it is still a challenge to attain high performance cellulose-based composite film materials with diverse functional combinations. In this work, we developed a multifunctional cellulose-based film via a facile impregnation-curing strategy. Here, benzoxazine resin (BR) is used as an optically functional component to endow the microfibrillated cellulose (MFC) film with powerful light management capabilities including UV and blue light double shielding, high transmittance, and high haze. Meanwhile, the introduction of tannic acid (TA) substantially enhanced the mechanical properties of the film, including tensile strength and toughness, by constructing energy-sacrificial bonds. An effective self-healing of the film was achieved by controlling the degree of BR curing. The final films exhibited 98.24 % UV shielding and 89.98 % blue light blocking, good mechanical properties including a tensile strength of 202.21 MPa and tensile strain of 7.1 %, as well as desirable thermal healing properties supported by incompletely cured BR. This work may provide new insights into the high-value utilization of biomass resources.

Revisiting various mechanistic approaches for cellulose dissolution in different solvent systems: A comprehensive review

The process of dissolving cellulose is a pivotal step in transforming it into functional, value-added materials, necessitating a thorough comprehension of the underlying mechanisms to refine its advanced processing. This article reviews cellulose dissolution using various solvent systems, along with an in-depth exploration of the associated dissolution mechanisms. The efficacy of different solvents, including aqueous solvents, organic solvents, ionic liquids, hybrid ionic liquid/cosolvent systems, and deep eutectic solvents, in dissolving cellulose is scrutinized, and their limitations and advantages are highlighted. In addition, this review methodically outlines the mechanisms at play within these various solvent systems and the factors influencing cellulose solubility. Conclusions drawn highlight the integral roles of the degree of polymerization, crystallinity, particle size, the type and sizes of cations and anions, alkyl chain length, ionic liquid/cosolvent ratio, viscosity, solvent acidity, basicity, and hydrophobic interactions in the dissolution process. This comprehensive review aims to provide valuable insights for researchers investigating biopolymer dissolution in a broader context, thereby paving the way for broader applications and innovations of these solvent systems.

Chitosan/zein-based sustained-release composite films: Fabrication, physicochemical properties and release kinetics of tea polyphenols from polymer matrix

This study investigated the properties of chitosan/zein/tea polyphenols (C/Z/T) films and analyzed the release kinetics of tea polyphenols (TP) in various food simulants to enhance the sustainability and functionality of food packaging. The results revealed that TP addition enhanced the hydrophilicity, opacity and mechanical properties of film, and improved the compatibility between film matrix. 1.5 % TP film showed the lowest lightness (76.4) and the highest chroma (29.1), while 2 % TP film had the highest hue angle (1.5). However, the excessive TP (above 1 % concentration) led to a decrease in compatibility and mechanical properties of film. The TP concentration (2 %) resulted in the highest swelling degree in aqueous (750.6 %), alcoholic (451.1 %), and fatty (6.4 %) food simulants. The cumulative release of TP decreased to 16.32 %, 47.13 %, and 5.87 % with the increase of TP load in the aqueous, alcoholic, and fatty food simulants, respectively. The Peleg model best described TP release kinetics. The 2 % TP-loaded film showed the highest DPPH (97.13 %) and ABTS (97.86 %) free radical scavenging activity. The results showed TP release influenced by many factors and obeyed Fick's law of diffusion. This study offered valuable insights and theoretical support for the practical application of active films.

Preparation of sustainable oxidized nanocellulose films with high UV shielding effect, high transparency and high strength

UV protection has become crucial as increasing environmental pollution has led to the destruction of the ozone layer, which has a weakened ability to block UV rays. In this paper, we successfully prepared cellulose-based biomass films with high UV shielding effect, high transparency and high tensile strength by graft-modifying oxidized cellulose nanocellulose (TOCN) with folic acid (FA) and borrowing vacuum-assisted filtration. The films had tunable UV shielding properties depending on the amount of FA added. When the FA addition was 20 % (V/V), the film showed 0 % transmittance in the UV region (200-400 nm) and 90.61 % transmittance in the visible region (600 nm), while the tensile strength was up to 150.04 MPa. This study provides a new integrated process for the value-added utilization of nanocellulose and a new route for the production of functional biomass packaging materials. The film is expected to be applied in the field of food packaging with UV shielding.

Cellulose-based light-management film exhibiting flame-retardant and thermal-healing properties

The increased use and expansion of biomass applications offer a viable approach to diminish reliance on petroleum-derived resources and promote carbon neutrality. Cellulose, being the most abundant natural polymer on Earth, has garnered considerable attention. This study introduces a straightforward method to fabricate a cellulose-based multifunctional composite film designed for efficient light management, specifically featuring flame retardant and thermal-healing capabilities. The film incorporates a microfibrillated cellulose (MFC) matrix with functional components, namely benzoxazine resin (BR) and 2-hydroxyethyl methacrylate phosphate (HEMAP). Utilizing dynamic covalent crosslinking, the composite films exhibit satisfactory self-healing properties. The combined effects of BR and HEMAP contribute to the effective flame retardancy of the composite film. Furthermore, the resulting film shields ultraviolet and blue light, offering comfortable interior lighting by mitigating harsh light and extending light propagation. The film also demonstrates favorable water resistance and high tensile strength. The exceptional multifunctional properties, coupled with its safety and extended service life, position it as a potential optical management film for smart building materials.

Tailoring Hydronium ion Driven Dissociation-Chemical Cross-Linking for Superfast One-Pot Cellulose Dissolution and Derivatization to Build Robust Cellulose Films

Concepts of sustainability must be developed to overcome the increasing environmental hazards caused by fossil resources. Cellulose derivatives with excellent properties are promising biobased alternatives for petroleum-derived materials. However, a one-pot route to achieve cellulose dissolution and derivatization is very challenging, requiring harsh conditions, high energy consumption, and complex solubilizing. Herein, we design a one-pot tailoring hydronium ion driven dissociation-chemical cross-linking strategy to achieve superfast cellulose dissolution and derivatization for orderly robust cellulose films. In this strategy, there is a powerful driving force from organic acid with a pKa below 3.75 to dissociate H+ and trigger the dissolution and derivatization of cellulose under the addition of H2SO4. Nevertheless, the driving force can only trigger a partial swelling of cellulose but without dissolution when the pKa of organic acid is above 4.26 for the dissociation of H+ is inhibited by the addition of inorganic acid. The cellulose film has high transmittance (up to ∼90%), excellent tensile strength (∼122 MPa), and is superior to commercial PE film. Moreover, the tensile strength is increased by 400% compared to cellulose film prepared by the ZnCl2 solvent. This work provides an efficient solvent, which is of great significance for emerging cellulose materials from renewable materials.

Adjustable strength and toughness of dual cross-linked nanocellulose films via spherical cellulose as soft-phase

Nanocellulose films possess numerous merits ascribing to their inherent biocompatibility, non-toxic and biodegradability properties. The potential for practical applications would be improved if their mechanical strength and toughness requirements could be met simultaneously. Herein, dual cross-linked nanocellulose (DC) film was fabricated by the treatments of chemical and physical cross-linking, which was mechanically superior to pure nanocellulose (CNF) films. To further increase the toughness of DC films, spherical cellulose (Sph) was incorporated into DC film (DC-Sph film), and analyzed under different humidity conditions (RH) (from 10 % to 90 %). The changes of functional groups of CNF, DC and DC-Sph films were detected by FTIR and XPS spectrum. The epichlorohydrin and Sph content were optimized, followed by the investigation of RH on the toughness of films. The highest tensile strength (146.6 ± 4.6 MPa) was obtained in DC film at 50 % RH, while the DC-Sph film showed the largest toughness (40.3 ± 3.7 kJ/m2) at 70 % RH. Furthermore, the possible toughening mechanism of DC-Sph film was also discussed.

Strong and flexible lignocellulosic film fabricated via a feasible molecular remodeling strategy

Biomass-derived sustainable film is a promising alternative to synthetic plastic, but hampered by strength, toughness and flexibility trade-off predicament. Here, a feasible and scalable strategy was proposed to fabricate strong and flexible lignocellulosic film through molecular reconstruction of cellulose and lignin. In this strategy, polyphenol lignin was absorbed and wrapped on the surface of cellulose fiber, forming strong interfacial adhesion and cohesion via intramolecular and intermolecular hydrogen bonding. Further, covalent ether bond was generated between the hydroxyl groups of lignocellulose to form chemical cross-linking network induced by epichlorohydrin (ECH). The synergistic effect of hydrogen bonding and stable chemical cross-linking enabled the resultant lignocellulosic film (ELCF) with outstanding mechanical strength of 132.48 MPa, the elongation at break of 9.77 %, and toughness of 9.77 MJ·m-3. Notably, the integration of polyphenol lignin synergistically improved the thermal stability, water resistance, UV-blocking performances of ELCF. Importantly, after immersion for 30 d, ELCF still possessed high wet strength of 70.38 MPa, and elongation at break of 7.70 %, suggesting excellent and durable mechanical performances. Moreover, ELCF could be biodegraded in the natural soil. Therefore, this study provides a new and versatile approach to reconstruct highly-performance lignocellulosic films coupling strength, toughness with flexibility for promising plastic replacement.

Robust and versatile superhydrophobic cellulose-based composite film with superior UV shielding and heat-barrier performances for sustainable packaging

Replacing single-use plastic delivery bags (SPDBs) with cellulose-based materials is an effective strategy to reduce environmental pollution. However, the inherent hydrophilicity and ultralow mechanical strength of cellulose materials limit its development. In this study, zinc oxide (ZnO)-cellulose composite films were successfully prepared through "two-step strategy" of lotus leaves structure simulation, including deposition of micro-nano ZnO particles and stearic acid (STA) modification. Well-dispersed micro-nano ZnO particles with stick-like structure were anchored in the ZnO-cellulose composite film prepared at 90 °C (CF-90). Due to the special structural design and strong interaction between the cellulose and micro-nano ZnO particles, the CF-90 showed higher mechanical property (a 47.8 % improvement in the tensile strength). Impressively, CF-90 also exhibited great UV shielding properties with larger UPF value of 1603.98 and superhigh heat-barrier performance. Moreover, CF-90 obtained excellent superhydrophobicity with a water contact angle of 163.6° by further modification. Consequently, the versatile cellulose-based material bringing a dawn on application of sustainable packaging materials for express delivery industry.

Efficient ultraviolet blocking film on the lignin-rich lignocellulosic nanofibril from bamboo

The ultraviolet (UV) blocking performance of current bio-based devices is always limited by delignification and exploited chemical treatment. Lignocellulosic nanofibril (LCNF) is a promising green alternative that could efficiently impede UV radiation. Herein, we proposed a robust LCNF film that achieved 99.8 ± 0.19 % UVB blocking, 96.1 ± 0.23 % UVA blocking, and was highly transparent without complex chemical modification. Compared to conventional lignin composites, this LCNF method involves 29.5 ± 2.31 % lignin content directly extracted from bamboo as a broad-spectrum sun blocker. This bamboo-based LCNF film revealed an excellent tensile strength of 94.9 ± 3.6 MPa and outstanding stability, adapting to the natural environment's variability. The residual hemicellulose could also embed the link between lignin and cellulose, confirming high lignin content in the network. The connection between lignin and hemicelluloses in the cellulose network was explored and described for the fibrillation of lignocellulosic nanofibrils. This research highlights the promising development of LCNFs for UV protection and bio-based solar absorption materials.

Dissolution of lignocellulose with high lignin content in AlCl3/ZnCl2 aqueous system and properties of the regenerated cellulose film

Herein, a novel method for dissolving lignocellulose at room temperature is proposed by combining deep eutectic solvents (DES) pretreatment and subsequent dissolution in AlCl₃/ZnCl₂ aqueous system. Results showed that DES pretreatment could significantly increase the dissolubility of lignin-containing cellulose (CL) samples in AlCl₃/ZnCl₂ aqueous system. The dissolution ratio of the CL sample with 15.6 % lignin content in AlCl₃/ZnCl₂·3H₂O solvent was as high as 90 %. Besides, the mechanism for the remarkable dissolution of CL samples in low water AlCl₃/ZnCl₂ aqueous solvent was also proposed. Moreover, the dissolved CL sample was regenerated for the production of lignocellulose films, which have excellent ultraviolet (UV) blocking, hydrophobic, mechanical strength, and natural degradation properties. In particular, the films could be completely naturally degraded after 10 days, which provided a promising way to prepare biodegradable lignocellulose materials, and to encourage the potential utilization of renewable lignocellulose in packaging industry.

Strong, flexible and UV-shielding composite polyvinyl alcohol films with wood cellulose skeleton and lignin nanoparticles

The development of high-performance composite films using biomass materials have become a sought-after direction. Herein, a green method to fabricate strong, flexible and UV-shielding biological composite film from wood cellulose skeleton (WCS), lignin nanoparticles (LNPs) and polyvinyl alcohol (PVA) was described. In the work, WCS and LNPs were prepared by chemical treatment of wood veneer and Enzymatic lignin, respectively. Then, WCS was infiltrated with the LNPs/PVA mixtures and dried to obtain composite films. WCS enhanced the mechanical properties of the composite films, the tensile stress reached to 85.8 MPa and the tensile strain reached to 6.39 %. The composite films with LNPs blocked over 98 % of UV-light, the water absorption decreased by 30 %, and the thermal stabilities were also improved. These findings would provide some references for exploring high quality biological composite films.

Supramolecular structure of microwave treated bamboo for production of lignin-containing nanocellulose by oxalic acid dihydrate

Supramolecular structure of cellulosic materials from microwave treatment were throughly investigated for production of lignin-containing nanocellulose. The results revealed that both the intermolecular and intramolecular hydrogen bonds were altered by microwave irradiation. Cellulose I_β was the main component in microwave treated bamboo (MTB) with smaller interplanar spacing, and the cellulose molecules were loosely connected resulting in a loose structure. Thereafter, MTB was used to produce lignin-containing nanocellulose by using oxalic acid dihydrate (OAD) to test the feasibility on its efficiency. The chemical consumed for the preparation of lignin-containing nanocellulose (LCN) with a comparable yield (68.08-82.33 %) from MTB was merely 1/10 that from conventional cellulosic materials, indicating the supramolecular structural changes of bamboo cellulose induced by microwave treatment provided suitable conditions for the subsequent hydrolysis of OAD to prepare LCN. The LCN was further added into the polyvinyl alcohol (PVA) matrix endowed excellent UV shielding property and thermal stability for the PVA/LCN films. This study was aimed to provide an environmentally friendly method on the production and application of LCN from bamboo by employing microwave treatment from the perspective of supramolecular level.

Enzyme colorimetric cellulose membrane bioactivity strips based on acetylcholinesterase immobilization for inhibitors preliminary screening

To quickly screen the active pharmaceutical ingredient that can be used as acetylcholinesterase inhibitors (AChEIs) to treat Alzheimer's disease, an enzyme colorimetric cellulose membrane bioactivity strip (CBS) was developed for simple and rapid screening of AChEIs. The amino group of acetylcholinesterase (AChE) undergoes Schiff base reaction with the aldehyde group on the oxidized cellulose membranes, then the AChE was covalently cross-linking on the surface of cellulose membranes, enabling the screening based on Ellman's enzyme colorimetric method. When the enzyme activity of AChE was inhibited after incubation with inhibitors, the hydrolysis of S-Acetylthiocholine iodide decreased, consequently, the 5-thio-2-nitrobenzoic acid generated by the reaction with 5,5'-dithiobis (2-nitrobenzoic acid) also decreased, leading to a decreased color intensity. In addition, CBSs had fast chromogenic time, excellent specificity, and extraordinary storage stability. Tacrine and Donepezil were used as representative inhibitors during the detection, while their IC₅₀ and limit of detection were determined. Therefore, our work not only established a platform for effective preliminary screening of AChEIs but also inspired the further development of other cellulose membrane-based biosensors.

Cross-Linked Carboxymethylcellulose Adsorbtion Membranes from Ziziphus lotus for the Removal of Organic Dye Pollutants

The goal of this study is to assess Ziziphus lotus's potential for producing carboxymethylcellulose adsorption membranes with the ability to adsorb methyl green from wastewaters by the revalorization of its cellulosic fraction. The cellulose from this feedstock was extracted by an alkaline process and TAPPI standard technique T 203 cm-99 and afterwards they were carboxymethylated. The obtained carboxymethylcelluloses were deeply characterized, being observed that the carboxymethylcellulose produced from the alkaline cellulose presented the higher solubility due to its lower crystallinity degree (53.31 vs. 59.4%) and its higher substitution degree (0.85 vs. 0.74). This carboxymethylcellulose was cross-linked with citric acid in an aqueous treatment in order to form an adsorption membrane. The citric acid provided rigidity to the membrane and although it was hydrophilic it was not soluble in water. By evaluating the potential of the produced membrane for the removal of pollutant dyes from wastewater, it was observed that the adsorption membrane prepared from the carboxymethylcellulose's produced from the Ziziphus lotus was able to remove 99% of the dye, methyl green, present in the wastewater. Thus, this work demonstrates the potential of the Ziziphus lotus for the production of a novel and cost-effective carboxymethylcellulose adsorption membrane with high capacity to treat wastewaters.

Enhanced Functional Properties of Bioplastic Films Using Lignin Nanoparticles from Oil Palm-Processing Residue

The development of bioplastic materials that are biobased and/or degradable is commonly presented as an alleviating alternative, offering sustainable and eco-friendly properties over conventional petroleum-derived plastics. However, the hydrophobicity, water barrier, and antimicrobial properties of bioplastics have hindered their utilization in packaging applications. In this study, lignin nanoparticles (LNPs) with a purification process were used in different loadings as enhancements in a Kappaphycus alvarezii matrix to reduce the hydrophilic nature and improve antibacterial properties of the matrix and compared with unpurified LNPs. The influence of the incorporation of LNPs on functional properties of bioplastic films, such as morphology, surface roughness, structure, hydrophobicity, water barrier, antimicrobial, and biodegradability, was studied and found to be remarkably enhanced. Bioplastic film containing 5% purified LNPs showed the optimum enhancement in almost all of the ultimate performances. The enhancement is related to strong interfacial interaction between the LNPs and matrix, resulting in high compatibility of films. Bioplastic films could have additional advantages and provide breakthroughs in packaging materials for a wide range of applications.

Strong Cellulose-Based Light-Management Film with Ultraviolet Blocking and Near-Infrared Shielding Performance

Light-management materials play a great significant role in efficient-energy buildings because they reduce indoor energy consumption by adjusting to natural sunlight, enhancing heat insulation, and creating comfortable indoor lighting. Here, we fabricated an ecofriendly and sustainable lignocellulose-based light-management film via a facile homogenization and mechanical hot-pressing method without complicated treatment or toxic reagents. The resulting film exhibited a favorable ultraviolet (UV) blocking performance of 82.25% for UVA, high visible light transmittance, and high haze, with a desirable tensile strength of 197 MPa, which was significantly higher than those of most petroleum-based plastics. Accordingly, the film was further endowed with near-infrared absorption performance by spray-coating with lanthanum hexaboride (LaB₆) nanoparticles─there were almost no adverse effects on its light transmittance or mechanical strength. Meanwhile, the high haze of the film implied that it met the requirement for privacy protection in smart buildings. The MFC/lignin/LaB₆ composite film has potential applications in energy-saving buildings and optoelectronic devices.