Physicochemical properties and microstructural behaviors of rice starch/soy proteins mixtures at different proportions

Effect of endogenous protein on starch before and after post-harvest ripening of corn: Structure, pasting, rheological and digestive properties

This work revealed the effects of endogenous proteins on the structural, physicochemical, and digestive properties of starch in corn before and after ripening and explored the binding mechanism of proteins with starch. The microstructure showed that the postharvest ripening process resulted in a thinning of the protein layer on the surface of starch particle. After the removal of protein, the uniformity of the sample surface increased, with tiny pores. The proportion of double helix structure of starch were significantly reduced, while the proportion of amorphous structure and the thickness (da) of the amorphous region were significantly increased. The gelatinization enthalpy, gelatinization viscosity value, consistency coefficient, elasticity, and rapid digestibility of starch (RDS) were all significantly increased. Due to the weakening of the interaction between starch (including amylose and amylopectin) and protein in post-ripened corn, the effect of protein removal on the structure and properties of unripened samples was more significant.

Effects of different binding strategies of D-galactose and glycinin on the thermal gelation behavior of the composite system

In this study, non-covalent and covalent interactions between D-galactose (DG) and glycinin (11S) were induced using a pH-shift method. This approach represents an innovative advancement in existing protein-monosaccharide binding strategies. Furthermore, the study investigated the resulting changes in gel behavior and the properties of the composite thermal gels. The solubility and Zeta-potential analysis showed that the non-covalent interaction (S-11S/DG) was more stable and less dispersed than the covalent interaction (S/DG-11S). Rheological results showed that S-11S/DG has higher viscosity and can form stable elastic gel after temperature program. FTIR and intermolecular force results indicated that both gels utilized disulfide bonds as the primary covalent force, with additional chemical bonds playing a secondary role in maintaining the stability of the gel network and surrounding water molecules. However, the S/DG-11S exhibits a looser structure, resulting in a less elastic and thinner network structure. In contrast, the S-11S/DG gel network demonstrated increased elasticity and support, enhancing its hardness, cohesion and water holding capacity. Thus, the pH-shifting-induced non-covalent gel system had more stable network structure and better properties than the pH-shifting-induced covalent gel system. This study offered new insights for constructing soybean protein gel systems and advancing the design of novel soybean protein products.

Mechanism of the effect of mixing guar gum and fish collagen peptide with rice on in vitro digestibility, gastric emptying and postprandial response

This study investigated the effects of adding guar gum (GG) and fish collagen peptide (FCP) during rice cooking on postprandial blood glucose and satiety of rice and the related mechanisms. The results showed that the combined intervention of GG and FCP (GG-FCP) significantly reduced the postprandial blood glucose levels. The GG increased the viscosity of the digesta, and the physical barrier of GG and FCP formed on the surface of the rice limited the disintegration of the rice granule. The chyme containing GG and FCP displayed a larger particle size and gastric emptying were delayed. GG-FCP alleviated the digestion rate of rice, with the rapidly digestible starch content decreasing from 77.68 % to 65.01 %. Low-field nuclear magnetic resonance (LF-NMR) analysis indicated the GG and FCP reduced the binding water content of starch. DSC analysis showed that the addition of GG and FCP reduced the enthalpy of gelatinization of rice flour from 5.87 to 3.13 J/g, and the gelatinization degree of the rice flour was reduced. This study investigated the mechanisms of exogenous additives in regulating rice digestion and postprandial response. The findings would provide evidence-based strategies for developing rice products with the potential to mitigate the effects of blood glucose.

Amorphous cassava starch/spirulina protein mixtures stabilized Pickering emulsions: Preparation and stability

This study explored stabilized emulsions using cassava starch (CS) and spirulina protein (SP) mixtures, targeting microbial proteins as potential replacements for animal proteins in food stability applications. The final viscosity and enthalpy change of the CS/SP mixtures decreased from 3.78 to 1.58 Pa·s and from 11 to 6.2 J/g with increased SP content (from 0 % to 40 %). Hydrophobic interactions were predominant in mixtures. Optimal emulsion stability was achieved with 70 % oil fraction and 40 % SP content, where adjustments in CS/SP ratio enhanced the robustness of cross-linked network. Thermal treatment, pH, and ionic strength differently affect emulsion storage stability for 42 days, with optimal performance at 70 °C, pH 3, and 50 mM NaCl. Synergistic stabilization of CS and SP was achieved through interfacial structures providing steric barriers and electrostatic repulsion, preventing droplet coalescence. This research highlights the potential of emulsions as nutrient delivery systems with high resilience against environmental stresses.

Characterization of sacha inchi (Plukenetia volubilis) and taro (Colocasia esculenta) flours with potential application in the preparation of both gluten-free and high protein foods

Background

Interest in alternative sources of tubers and legumes has increased due to the search for raw materials with bioactive antioxidant compounds. The objective of this study was to characterize taro (TF) and sacha inchi ( Plukenetia volubilis) flours obtained by the wet (SIF-WM) and defatted (SIF-DM) methods, as alternatives for the formulation of functional foods.

Methods

Proximal tests were conducted to determine basic chemical composition, quantification of free polyphenols, antioxidant activity using the ABTS* radical method (2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)) with Trolox as a standard, and rheological analyses, including pasting curves, flow profiles, and viscoelastic properties. Microbiological characterization of the flours was also performed.

Results

The highest protein content was found in sacha inchi flour obtained by the defatted method (72.62%), while carbohydrates were the main component in taro flour (85.4%). In terms of antioxidant activity, taro flour showed higher values of 2.71 µmol ET/g and 7.47 mg EAG/g. Rheological analysis showed that adding taro flour increased the viscosity peak and reduced breakdown, improving gel stability. Staphylococcus aureus and Salmonella spp. were detected in taro flour.

Conclusions

Taro and sacha inchi flours have great potential for the development of functional products like protein snacks, with good expansion due to taro starch and are naturally gluten-free, making them suitable for people with celiac disease.

New insights into influencing the extraction efficiency of tigernut oil: Impact of heat on oil absorption and enzymatic hydrolysis of tigernut starch in a starch-protein-oil model system

Tigernut is a potential source of valuable edible oil; however, current oil extraction techniques are inefficient. We assessed high temperature-induced variations in oil absorption and enzymatic hydrolysis of tigernut starch (TS) in the presence of protein to explore the intrinsic reasons for the low oil extraction from tigernut. The results showed that, due to high temperature and the presence of protein, an increase in the volume mean diameters and agglomeration of TS granules occurred. As the temperature increased (80-140 °C), the relative crystallinity (19.09 %-24.40 %) of the long-range ordered structure and the orderliness of the short-range ordered structure increased, the total oil absorption (TOA: 0.25-0.19 g oil/g sample) decreased, and the starch-lipid complex index (2.56 %-24.61 %) increased. With increasing temperature in the range of 170-200 °C, the short-range ordered structure of TS became more compact, and the TOA (0.18-0.14 g oil/g sample) and the starch-lipid complex index (24.61 %-5.64 %) decreased. Changes in the structure of TS led to an increase and then a decrease in its thermal stability, an enhancement of the gel network structure, and a weakening of enzymatic hydrolysis. Results can help reveal the oil absorption mechanism of TS and regulate its physicochemical properties for the efficient extraction of tigernut oil.

An Experimental and Computational Study on the Effects of Ball Milling on the Physicochemical Properties and Digestibility of a Canna Starch/Tea Polyphenol Complex

To investigate the impact of tea polyphenols on the thermodynamic properties, gelatinization properties, rheological properties, and digestion characteristics of starch after ball milling, canna starch and tea polyphenols were mixed at a 10:1 ratio (w/w) in an experiment and processed with different ball milling times. After ball milling for 3 h, the tea polyphenols and starch fragments formed complexes. Compared with the unmilled mixture, the solubility increased by 199.4%; the shear stress decreased by 89.48%; and the storage modulus and loss modulus decreased. The content of resistant starch first decreased and then increased. Infrared results revealed that ball milling led to a non-covalent interaction between the tea polyphenols and starch. Molecular dynamics simulations were used to study the interaction between the starch and tea polyphenols. The binding free energy of the main component, epigallocatechin gallate (EGCG), in tea polyphenols with starch was reduced from -23.20 kcal/mol to -26.73 kcal/mol. This experiment can provide a reference for the development of functional starch with high resistant starch content.

Controlling pea starch gelatinization behavior and rheological properties by modulating granule structure change with pea protein isolate

The purpose of this study was to investigate how the gelatinization behavior of pea starch (PS) was affected by pea protein isolate (PPI). The findings revealed that higher PPI levels decreased the swelling power of PS. Incorporating PPI raised the hot paste viscosity of PS, lowered the pasting temperature, and notably increased the gelatinization enthalpy according to differential scanning calorimetry analysis. Furthermore, the presence of PPI reduced the storage moduli of the starch paste, enhanced shear thinning behavior, and hindered starch molecular chain aggregation. With increasing PPI content from 0 to 12 %, amylose leaching and gel strength decreased by 25.6 % and 38.2 % respectively, indicating weak gel formation induced by PPI in PS. Confocal laser scanning microscopy confirmed that PPI envelopment of starch granules restricted their gelatinization by limiting granule swelling. These results carry significant implications for crafting pea-based foods with desired texture.

Effect of four highland barley proteins on the retrogradation and in vitro digestion properties of highland barley starch

This study evaluated the effects of four highland barley proteins (HBPs), namely albumin, globulin, gliadin and glutenin, on the retrogradation and in vitro digestion properties of highland barley starch (HBS). The results showed globulin had the most significant effect on inhibiting short-term retrogradation of HBS, which was reflected in the reduction of G' and G". Compare with HBS, four HBPs could significantly inhibit long-term recrystallization process. For albumin, globulin, gliadin and glutenin, the degree of retrogradation reduced from 51.55 % to 48.20 %, 35.06 %, 42.22 % and 32.63 %, respectively, which was reflected in the decrease of water migration rate, crystal enthalpy, crystallinity and short-range order. It could be found that glutenin had the most significant effect on inhibiting long-term retrogradation of HBS. Moreover, the anti-digestion properties of retrograded HBS with HBPs intervention significantly increased, with glutenin most significantly. Compared with HBS, resistant starch (RS) content increased by 59.76 % at 28 d of retrogradation.

Effect of Rice Protein on the Gelatinization and Retrogradation of Rice Starch with Different Moisture Content

Rice protein and moisture content are pivotal in the gelatinization and retrogradation processes of rice starch. This study aimed to explore the influence of rice protein on these processes by preparing rice starch gels with varying moisture levels and incorporating rice protein. At a high moisture content of 1:6, rice protein exhibited a minimal effect on the gelatinization properties of rice starch but significantly retarded the retrogradation of the starch gel. At intermediate moisture levels of 1:4 and 1:2, the rice starch gels showed pronounced retrogradation. However, rice protein was effective in inhibiting this retrogradation at a 1:4 moisture content, while its inhibitory effect diminished at a 1:2 moisture content. Under low moisture conditions of 1:1, the gelatinization of rice starch was markedly constrained by the limited water availability, but rice protein mitigated this constraint. Conversely, at this moisture level, rice protein promoted the retrogradation of the rice starch gel during the retrogradation process. The findings of this study offer a theoretical foundation that could inform the production of rice-based products.

Microbial Polysaccharides as Functional Components of Packaging and Drug Delivery Applications

This review examines microbial polysaccharides' properties relevant to their use in packaging and pharmaceutical applications. Microbial polysaccharides are produced by enzymes found in the cell walls of microbes. Xanthan gum, curdlan gum, pullulan, and bacterial cellulose are high-molecular-weight substances consisting of sugar residues linked by glycoside bonds. These polysaccharides have linear or highly branched molecular structures. Packaging based on microbial polysaccharides is readily biodegradable and can be considered as a renewable energy source with the potential to reduce environmental impact. In addition, microbial polysaccharides have antioxidant and prebiotic properties. The physico-chemical properties of microbial polysaccharide-based films, including tensile strength and elongation at break, are also evaluated. These materials' potential as multifunctional packaging solutions in the food industry is demonstrated. In addition, their possible use in medicine as a drug delivery system is also considered.

Characterization of Plant-Based Meat Treated with Hot Air and Microwave Heating

Plant-based meat is growing globally due to health, environmental, and animal welfare concerns, though there is a need for quality improvements. This study assessed how different ratios of wheat gluten (WG) to soy protein isolate (SPI) and various baking methods-hot air (HA), microwave (MW), and a combination of both (HA-MW)-affect the physicochemical properties of plant-based meat. Increasing the SPI from 0% to 40% significantly enhanced lightness, hardness, chewiness, water-holding capacity, moisture content, and lysine (an essential amino acid) (p ≤ 0.05). Hardness and chewiness ranged from 4.23 ± 1.19 N to 25.90 ± 2.90 N and 3.44 ± 0.94 N to 18.71 ± 1.85 N, respectively. Baking methods did not affect amino acid profiles. Compared to HA baking, MW and HA-MW baking increased lysine content (561.58-1132.50 mg/100 g and 544.85-1088.50 mg/100 g, respectively) while reducing fat and carbohydrates. These findings suggest that a 40% SPI and 60% WG ratio with microwave baking (360 W for 1 min) optimizes plant-based meat, offering benefits to both consumers and the food industry in terms of health and sustainability.

Different effects of pea protein on the properties and structures of starch gel at low and high solid concentrations

In the context of starch-protein composite gels, the influence of protein on gel formation significantly shapes the textural attributes of starch gels, leading to distinct outcomes. This study aimed to evaluate how different ratios of pea protein (PP) affect the properties and structures of starch-protein composite gels at low (10 wt%) and high (40 wt%) solid concentrations. The addition of PP had opposite effects on the two gels. Compared to the pure starch gel, the low-concentration composite gel (LCG) with 20 % PP experienced a 48.90 ± 0.33 % reduction in hardness, and the storage modulus (G') decreased from 14,100 Pa to 5250 Pa, indicating a softening effect of PP on LCG. Conversely, the hardness of the high-concentration composite gel (HCG) with 20 % PP exhibited a 62.19 ± 0.03 % increase in hardness, and G' increased from 12,100 Pa to 41,700 Pa, highlighting the enhancing effect of PP on HCG. SEM and fluorescence microscopy images showed that PP induced uneven network sizes in LCG, while HCG with a PP content of 20 %, PP, together with starch, formed a three-dimensional network. This study provides valuable insights and guidance for the design and production of protein-enriched starch gel products with different textural properties.

Optimization of ultrasonic conditions for improving the characteristics of corn starch-glycyrrhiza polysaccharide composite to prepare enhanced quality lycopene inclusion complex

In this study, based on response surface optimization of ultrasound pre-treatment conditions for encapsulating lycopene, the corn starch-glycyrrhiza polysaccharide composite (US-CS-GP) was used to prepare a novel lycopene inclusion complex (US-CS-GP-Lyc). Ultrasound treatment (575 W, 25 kHz) at 35 °C for 25 min significantly enhanced the rheological and starch properties of US-CS-GP, facilitating the preparation of US-CS-GP-Lyc with an encapsulation efficiency of 76.12 ± 1.76 %. In addition, the crystalline structure, thermal properties, and microstructure of the obtained lycopene inclusion complex were significantly improved and showed excellent antioxidant activity and storage stability. The US-CS-GP-Lyc exhibited a V-type crystal structure, enhanced lycopene loading capacity, and reduced crystalline regions due to increased amorphous regions, as well as superior thermal properties, including a lower maximum thermal decomposition rate and a higher maximum decomposition temperature. Furthermore, its smooth surface with dense pores provides enhanced space and protection for lycopene loading. Moreover, the US-CS-GP-Lyc displayed the highest DPPH scavenging rate (92.20 %) and enhanced stability under light and prolonged storage. These findings indicate that ultrasonic pretreatment can boost electrostatic forces and hydrogen bonding between corn starch and glycyrrhiza polysaccharide, enhance composite properties, and improve lycopene encapsulation, which may provide a scientific basis for the application of ultrasound technology in the refined processing of starch-polysaccharides composite products.

Effects of crosslinking agents on properties of starch-based intelligent labels for food freshness detection

The impact of citric acid, carboxymethyl cellulose, carboxymethyl starch, sodium trimetaphosphate, or soybean protein on the crosslinking of starch-based films was examined. These crosslinking starch films were then used to create pH-sensitive food labels using a casting method. Blueberry anthocyanins were incorporated into these smart labels as a pH-sensitive colorimetric sensor. The mechanical properties, moisture resistance, and pH responsiveness of these smart labels were then examined. Crosslinking improved the mechanical properties and pH sensitivity of the labels. These different crosslinking agents also affected the hydrophobicity of the labels to varying degrees. Soybean protein was the only additive that led to labels that could sustain their structural integrity after immersion in water for 12 h. Because it increased the hydrophobicity of the labels, which decreased their water vapor permeability, moisture content, swelling index, and water solubility by 47 %, 29 %, 52 % and 10 %, respectively. The potential of using these labels to monitor the freshness of chicken breast was then examined. Only the films containing soybean protein exhibited good pH sensitivity, high structural stability, and low pigment leakage. This combination of beneficial attributes suggests that the composite films containing starch and soybean protein may be most suitable for monitoring meat freshness.

Assembly of soy protein-corn starch composite gels by thermal induction: Structure, and properties

The effect of different corn starch (CS) concentrations on the gel formation of soybean isolate protein (SPI) was investigated. Moreover, the texture, rheological properties of the gel were determined, and the spatial structure and interactions of the composite gel system were analyzed. The composite system transitioned from liquid to solid-like with an increase in the CS concentration and did not backflow when inverted for 24 h. With the addition of CS, the gel strength, water holding capacity (WHC), G', and G'' increased significantly. The maximum was reached at 10 % starch concentration with gel strength of (228.96 ± 29.86) g and WHC of (98.93 ± 2.02)  %. According to low-field 1H nuclear magnetic resonance (LF-NMR) results, CS has a high water absorption capacity, which improved the WHC. The scanning electron microscopy results revealed that composite gels with a high CS concentration had a more dense and small void network structure. According to the results of molecular force interaction, infrared spectroscopy, Raman spectroscopy, and free sulfhydryl group analysis, the added starch promoted the unfolding of SPI molecules, exposure of hydrophobic groups, transformation of free sulfhydryl groups into disulfide bonds, and hydrogen bond formation. Hydrophobic interactions, disulfide bonding, and hydrogen bonding function together to form the SPI-CS composite gel system. The study results provide the basis for applying soy protein and CS gels.

Tailoring the oral sensation and digestive behavior of konjac glucomannan-gelatin binary hydrogel based bigel: Effects of composition and ratio

In the food industry, there is a growing demand for bigels that offer both adaptable oral sensations and versatile delivery properties. Herein, we developed bigels using a binary hydrogel of konjac glucomannan (KGM) and gelatin (G) combined with a stearic acid oleogel. We closely examined how the oleogel/hydrogel volume ratio (φ) and the KGM/G mass ratio (γ) influenced various characteristics of the bigels, including their microstructure, texture, rheological properties, thermal-sensitivity, oral tribology, digestive stability, and nutraceutical delivery efficiency. A noteworthy observation was the structural evolution of the bigels with increasing φ values: transitioning from oleogel-in-hydrogel to a bicontinuous structure, and eventually to hydrogel-in-oleogel. Lower γ values yielded a softer, thermally-responsive bigel, whereas higher γ values imparted enhanced viscosity, stickiness, and spreadability to the bigel. Oral tribology assessments demonstrated that φ primarily influenced the friction sensations at lower chewing intensities. In contrast, γ played a significant role in augmenting oral friction perceptions during more intense chewing. Additionally, φ dictated the controlled release and bioaccessibility of curcumin, while γ determined digestive stability. This study provides valuable insights, emphasizing that through meticulous selection and adjustment of the hydrogel matrix composition, bigels can be custom-fabricated to achieve specific oral sensations and regulated digestive behaviors.

Investigation of 3D printing product of powder-based white mushroom incorporated with soybean protein isolate as dysphagia diet

The elderly people are prone to dysphagia due to weakened muscle strength. 3D food printing could modify the nutritional ratio and shape design to produce personalized nutritious food suitable for patients with dysphagia. White mushroom (Agaricus bisporus) is rich in a variety of active ingredients such as polysaccharides and polyphenols which are beneficial to human body, but its unique texture is not suitable for patients with dysphagia to chew. This study investigated the impact of different concentrations of soybean protein isolate (SPI, 3%, 5%, 7%, w/w) on 3D food printing of white mushroom powder and carried out the hierarchical representation of dysphagia diet within the framework of International Dysphagia Diet Standardization Initiative (IDDSI). The results illustrated that SPI addition to white mushroom gel reduced water mobility and promoted hydrogen bond formation, which significantly improved the mechanical strength and cohesiveness of printing inks, including yield stress, viscosity and hardness. IDDSI tests showed that the SPI addition of 3% and 5% helped the printing ink pass the spoon tilt test and the fork drip test, which could be classified as level 5 minced and moist food under the consideration of the fork pressure test. The 3D printing results indicated that the 7% SPI addition made the yield stress too high and was not easy for extrusion, resulting in the appearance defects of the printed sample. The addition of 3% SPI could make the printed sample have smooth surface and excellent self-supporting capacity. This work provides insights of white mushroom 3D printing technology as a more visually appealing dysphagia diet.

Research on corn starch and black bean protein isolate interactions during gelatinization and their effects on physicochemical properties of the blends

The interaction between starch and protein during food processing is crucial for controlling food quality. This study aims to understand the interactions between corn starch and black bean protein isolate (BBPI) at various gelatinization phases and their effects on the physicochemical properties of the blends. BBPI reduced the rheological properties of the corn starch/BBPI mixed system during gelatinization, increasing light transmittance and gelatinization temperature, while decreasing total viscosity and enthalpy change. The changes in starch and protein microstructure during gelatinization indicated that BBPI adhered to the starch particle surface or partially penetrated the swollen starch particles. Fourier transform infrared spectroscopy (FT-IR) revealed that BBPI decreased the number of hydrogen bonds within starch, with no newly formed functional groups in the mixed system. Furthermore, BBPI reduced the composite relative crystallinity (RC). The effect of protein addition on water migration in the mixed system demonstrates that protein and starch compete for water during gelatinization, preventing water molecules from diffusing into starch particles.

Tomographical, rheological, and structural effects of soy protein concentrate in a gluten-free extruded noodle system

Global interest in high-protein foods has been rapidly increasing and the gluten-free products are no exceptions. Gluten-free extruded noodles made from rice flour were thus fortified with soy protein concentrate (SPC) (0%, 15%, 30%, and 45% by weight), and the physicochemical properties of the noodles were characterized in terms of tomographical, rheological, and structural features. SPC-rice flour blends showed higher water absorption and swelling power at room temperature with increasing levels of SPC, which were reduced upon heating. The flour blends with high-levels of SPC also had lower pasting viscosities. Thermal analysis showed lower enthalpy values and higher temperatures derived from starch gelatinization. When the SPC-rice flour blends were applied to extruded gluten-free rice noodles, the noodles tomographically showed a dense and compact structure, that could be favorably correlated with their textural changes (increased hardness and reduced extensibility). FTIR analysis presented the structural changes of the noodles containing different levels of SPC by showing higher intensity of protein-related absorption peaks and lower starch peak intensity, which could be associated with the reduced cooking loss. Moreover, there existed two water components with different mobilities in the noodles whose spin-spin relaxation times had a tendency to increase with increasing SPC content. The results obtained from this study provided fundamental insights into the processing performance of protein-rich ingredients in gluten-free extruded noodles, probably promoting the development of a wider variety of protein-fortified gluten-free products.

Biomacromolecule assembly of soy glycinin-potato starch complexes: Focus on structure, function, and applications

The effect of the cross-linking mechanism and functional properties of soy glycinin (11S)-potato starch (PS) complexes was investigated in this study. The results showed that the binding effecting and spatial network structure of 11S-PS complexes via heated-induced cross-linking were adjusted by biopolymer ratios. In particular, 11S-PS complexes with the biopolymer ratios of 2:15, had a strongest intermolecular interaction through hydrogen bonds and hydrophobic force. Moreover, 11S-PS complexes at the biopolymer ratios of 2:15 exhibited a finer three-dimensional network structure, which was used as film-forming solution to enhance the barrier performance and mitigate the exposure to the environment. In addition, the 11S-PS complexes coating was effective in moderating the loss of nutrients, thereby extending their storage life in truss tomato preservation experiments. This study provides helpful to insights into the cross-linking mechanism of the 11S-PS complexes and the potential application of food-grade biopolymer composite coatings in food preservation.

Effect of rice protein on the gelatinization and retrogradation properties of rice starch

In this study, rice starch (RS) was mixed with varying amounts of rice protein (RP; 0 % to 16 %) to explore the effects of protein on the gelatinization and retrogradation of starch during storage. The increased RP addition decreased the viscosity and gelatinization enthalpy of the mixtures but caused an upward trend in the gelatinization temperature, indicating that protein hampers the process of starch gelatinization. Furthermore, RP addition reduced gel hardness, decreased retrogradation enthalpy and crystallization rate constant, but increased Avrami exponent upon RS retrogradation. RP addition also facilitated the mobility of water molecules, weakened the conversion from bound water to free water in the gels, and moderately increased the uniformity and thickness of gel shape. In summary, RP had a dose-dependent effect on the gelatinization and retrogradation behavior of RS, although the anti-retrogradation concentration effect strongly weakened at protein levels exceeding 12 %. It is noteworthy, that excessive RP addition resulted in disulfide bond formation, which increased gel strength and network structure but reduced the ability of RP to facilitate water molecule mobility and restrict water migration, ultimately reducing its anti-retrogradation capability. This phenomenon can be partially attributed to spontaneous protein-protein interaction caused by excessive protein addition, replacing the starch-protein interaction.

Mechanism of synergistic stabilization of emulsions by amorphous taro starch and protein and emulsion stability

Amorphous taro starch (TS)/whey protein isolate (WPI) mixtures were prepared using pasting treatment. The TS/WPI mixtures and their stabilized emulsions were characterized to determine the emulsion stability and the mechanism of synergistic stabilization of emulsions. As WPI content increased from 0% to 13%, the paste final viscosity and retrogradation ratio of the TS/WPI mixture gradually decreased from 3683 cP to 2532 cP and from 80.65% to 30.51%, respectively. As the WPI content increased from 0% to 10%, the emulsion droplet size decreased gradually from 96.81 μm to 10.32 μm, and the storage modulus G' and stabilities of freeze-thaw, centrifugal, and storage increased gradually. Confocal laser scanning microscopy revealed that WPI and TS were mainly distributed at the oil-water interface and droplet interstice, respectively. Thermal treatment, pH, and ionic strength had little influence on the appearance but had different influences on the droplet size and G', and the rates of droplet size and G' increase under storage varied with different environmental factors.

Effects of three glutenins extracted in acidic, neutral and alkaline urea solutions on the retrogradation of wheat amylose and amylopectin

Three glutenins (glutenin 1, glutenin 2, and glutenin 2) were extracted in acidic, neutral and alkaline urea solutions respectively. All of the three glutenins are rich in glutamic acid (Glu, >30 %) and proline (Pro, >20 %). Glutenin 1, extracted at pH 5, shows higher contents of hydrophilic amino acids as serine (Ser, 5.25 %), aspartic acid (Asp, 2.99 %), tyrosine (Tyr, 3.11 %), arginine (Arg, 2.09 %) and threonine (Thr, 2.11 %) than the other two glutenins. The retrogradation of three glutenins with amylose/amylopectin indicated that glutenin 1 showed significant inhibition effect on the retrogradation of wheat amylose. The characterizations of amylose retrograded with glutenin 1 by FT-IR, XRD, DSC and solid ¹³C NMR showed that new hydrogen bonds between Glu, Tyr and wheat amylose were formed, which prevented the formation of hydrogen bonds between amylose themselves. Glycosidic bonds between some hydroxyl groups of C6 in wheat amylose and certain hydroxyl groups of Ser and Thr in glutenin with specific chain length were present. The macromolecules with steric hindrance prevented the rearrangement of amylose into regular crystals. The retrogradation of wheat amylose was inhibited in this way. This study provides a key targeting step to control the retrogradation of amylose.

Effects of rice protein, soy isolate protein, and whey concentrate protein on the digestibility and physicochemical properties of extruded rice starch

Protein, as the second major component in starchy foods, is crucial for its influence on the physicochemical properties and digestibility of starch. However, the effect of different sources of protein on starch digestibility is still unclear. In this paper, the effects of different sources of proteins (rice protein: RP, soybean isolate protein: SPI, and whey concentrate protein: WPC) on structural features, digestibility, and enzyme activity of extruded rice starch were investigated. The addition of all three proteins reduced the starch digestibility of extrudates. Native SPI and WPC suppressed amyloglucosidase activity, and all three proteins exhibited stronger amyloglucosidase inhibition when hydrolyzed. The rheological properties and Fourier transform infrared spectroscopy results revealed the exogenous proteins and starch interacted through non-covalent bonds and improved the ordered structures in the extrudates. The extrusion process also facilitated the formation of a V-type structure. The sum of SDS and RS content of extrudates was negatively correlated with the content of leached amylose and positively correlated with the ratio of 1047/1022 cm^-1 . These findings suggest that the inclusion of exogenous proteins during extrusion can affect starch digestibility through mechanisms such as the interaction with starch molecules, as well as the inhibition of amylase activity. PRACTICAL APPLICATION: This result indicated that the addition of protein during extrusion not only increased the nutritional value of the extrudate, but also decreased the starch digestibility. Extrusion technology can efficiently produce extruded products with protein, expanding further applications of protein in food and providing new healthy staple food options for special populations, such as diabetic and overweight people.

Cloning, homology modelling and expression analysis of Oryza sativa WNK gene family

With No Lysine kinases (WNKs) represents a gene family that encodes Ser/Thr kinases, with anomalous disposition of catalytic lysine residue in subdomain I. In plants, WNKs had been linked to circadian rhythm, photoperiodic response and abiotic stress tolerance with mechanism yet undeciphered. In the present study, full-length CDS sequences of rice WNKs (OsWNK1 to 8) were cloned from indica cultivar IR64. A total of six highly conserved kinase subdomains were identified. Comparative analysis of protein sequences from six different species of rice showed varying magnitudes of substitution (76.2 %), deletion (15.4 %), and addition (8.4 %) events. ConSurf analysis coupled with CASTp results identified functional residues that were clustered together in modelled 3-D structures. Among post-translational modifications (PTMs) studied, 87.7 % of phosphorylation sites were predicted. Mined protein-protein interactions (PPIs) depicted OsWNKs to interact notably with other OsWNK members and with key proteins like PRR95 involved in photoperiodic response and protein phosphatase like PP2C involved in ABA signalling. Gene duplication analysis revealed two paralogous duplicated gene pairs: WNK6-WNK9 and WNK7-WNK8. Oryza sativa showed maximum syntenic relationship with Sorghum bicolor among the compared species. OsWNKs showed differential transcript expression profiles on treatment with plant growth regulators indicating its versatile role in plant growth and development.

Structural, Thermal and Pasting Properties of Heat-Treated Lotus Seed Starch–Protein Mixtures

The interactions between starch and protein, the essential components of lotus seed, strongly influence the quality of lotus seed processing by-products. This study investigated the effects of lotus seed starch–protein (LS-LP) interactions on the structural, thermal and gelatinization properties of LS-LP mixtures, using LS/LP ratios of 6:1, 6:2, 6:3, 6:4, 6:5, or 1:1, after heat treatment (95 °C, 30 min). Fourier transform infrared peaks at 1540 cm⁻¹ and 3000–3600 cm⁻¹ revealed the major interactions (electrostatic and hydrogen bonding) between LS and LP. The UV–visible absorption intensities (200–240 nm) of LS-LP mixtures increased with increased protein content. X-ray diffraction and electron microscopy revealed that LS-LP consists of crystalline starch granules encapsulated by protein aggregates. Increasing the addition of protein to the mixtures restricted the swelling of the starch granules, based on their solubility, swelling properties and thermal properties. Viscometric analysis indicated that the formation of LS-LP mixtures improved structural and storage stability. These findings provide a practicable way to control the thermal and gelatinization properties of lotus seed starch–protein mixtures, by changing the proportions of the two components, and provide a theoretical basis for developing novel and functional lotus-seed-based foods.

Pasting, Rheological, and Tribological Properties of Rice Starch and Oat Flour Mixtures at Different Proportions

Rice starch (RS) and oat flour (OF) were mixed in different proportions, and the pasting properties, particle size, rheology, and tribological properties of the mixed system were analyzed. According to the RVA results, OF inhibited the starch pasting, and the pasting temperature and peak viscosity of the mixed system increased. The particle size shifted toward the small particle size after the mixing of RS and OF components, and the RS/OF 9/1 particle size is the smallest. All samples exhibited shear dilution behavior and the viscosity of the system could be significantly increased at a 10 wt% RS content. At sliding speeds of >1 mm/s, the friction of the mixture is usually between the two individual components, which also confirmed the association or interaction between the two polymers.