Development of a buccal bioadhesive nicotine tablet formulation for smoking cessation

Emerging trends in designing polysaccharide based mucoadhesive network hydrogels as versatile platforms for innovative delivery of therapeutic agents: A review

INTRODUCTION

The rapid progress in polymer science has designed innovative materials for biomedical applications. In the case of drug design, for each new therapeutic agent, a drug delivery system (DDS) is required to improve its pharmacokinetic and pharmacodynamic parameters. Therefore, significant research has been carried out to develop drug delivery (DD) carriers for these new therapeutic agents. Hydrogels have been explored as potential candidates to prepare controlled drug delivery (CDD) systems to address the challenges related to the performance of the conventional DD formulations. Mucoadhesive drug delivery system (MUCO-DDS) is a specialized form of CDD system, facilitating site-specific DD, protecting the drug from first pass metabolism and enhancing its overall bioavailability.

METHODS

The present article provides a comprehensive discussion of the synthesis, properties and applications of polysaccharide-derived MUCO-DDS. Different natural polymer-derived MUCO-DDS including chitosan, alginate, pectin, xanthan gum, psyllium, gelatin, cellulose, hyaluronic acid, guar gum, sterculia gum and tragacanth gum have been reported. Herein, these DDS were elaborately discussed along with their applications and future-prospective. These DDS are classified on the basis of drug administration (nasal, ocular, vagina/rectal & buccal DDS) and drug distribution (reservoir and monolithic polymer matrix). Factors contributing to modifications of properties of MUCO-DDS were also demonstrated along with different stages and theories of mucoadhesion.

RESULTS

Polysaccharides exhibit properties such as biocompatibility, biodegradability, and flexibility, making them ideal for CDD applications. MUCO-DDS demonstrates several significant advantages. Moreover, the article bridges theoretical insights with practical applications and future research prospects, ensuring its relevance for advancements in the concerned field. This review serves as a comprehensive resource, addressing gaps in previous literature and paving the way for innovations in MUCO-DDS, through a comparative analysis of the advantages, limitations, and modifications of natural polymers.

CONCLUSIONS

In conclusion, this review gives an overview of the current developments in the field of mucoadhesive DD systems and also gives insights into the future perspectives. The MUCOAD of DDS could be modulated by the inclusion of various natural and synthetic components in hydrogels. Future directions for the researchers are underway to integrate nanotechnology with mucoadhesive systems to create hybrid platforms. Overall, by addressing current limitations and leveraging emerging technologies, these systems can revolutionize drug delivery for a wide range of therapeutic applications.

Alginate-based matrix tablets for drug delivery

INTRODUCTION

As a nature-derived polymer with swelling and gelling properties, alginate has found wide biopharma-relevant applications. However, there is comparatively limited attention on alginate in tablet formulations. Therefore, this review aimed to provide an overview of the applications of alginate in solid dosage form formulations.

AREAS COVERED

This review outlines the role of alginate for oral sustained release formulations. For better insights into its application in drug delivery, the mechanisms of drug release from alginate matrices are discussed alongside the alginate inherent properties and drug properties. Specifically, the influence of alginate properties and formulation components on the resultant alginate gel and subsequent drug release is reviewed. Modifications of the alginate to improve its properties in modulating drug release are also discussed.

EXPERT OPINION

Alginate-based matrix tablets is useful for sustaining drug release. As a nature-derived polymer, batch consistency and stability raise some concerns about employing alginate in formulations. Furthermore, the alginate gel properties can be affected by formulation components, pH of the dissolution environment and the tablet matrix micro-environment pH. Conscientious efforts are pivotal to addressing these formulation challenges to increase the utilization of alginate in oral solid dosage forms.

Mucoadhesive bilayered buccal platform for antifungal drug delivery into the oral cavity

A drug delivery technology comprising a mucoadhesive bilayered buccally anchored tablet containing natamycin was developed. The concept was to anchor the tablet to the buccal tissue and allow controlled release of the drug through the matrix into the mouth. Carbomer (Carbopol ® 974 P NF) was used to formulate the mucoadhesive layer. Hydroxypropyl methylcellulose (HPMC) (Methocel® K4M) at 10, 15, 20, and 40% w/w was used for the drug-containing layer. Natamycin, an amphoteric macrolide antifungal agent, was incorporated into the formulations. In addition, tablets containing erythrosine as a marker were prepared in order to examine the distribution and retention of the dye in the oral cavity. As expected, the in vitro analysis showed that the concentration of natamycin released decreased with the increasing proportion of HPMC in the formulation. A small volunteer study was conducted using the tablets containing 10% and 20% HPMC to quantitate the patterns of distribution of the drug released into the oral cavity (upper right buccal vestibule, lower right and left buccal vestibules, and sublingual region). The mucoadhesive bilayered buccal tablet formulation provided a unidirectional release of the drug from the tablet into the oral cavity in a prolonged release fashion, maintaining drug concentration above the MIC value (2 μg/mL) for Candida albicans. The amount of the drug in the sublingual region was found to be lowest when compared with other regions, which is due to the higher flow of saliva in this region. Graphical abstract.

Formulation, development, and in-vitro/ex-vivo evaluation of vaginal bioadhesive salbutamol sulfate tablets for preterm labor

Preterm labor is the main cause of death and serious illness of both infants and pregnant women in Africa and worldwide. Parenteral and oral salbutamol sulfate as a B₂ antagonist has been used for the treatment of preterm labor. The study aims are to formulate salbutamol sulfate non-invasive vaginal bioadhesive tablets to avoid the side effects of conventional formulations. Full factorial design 4¹ ×3¹ ×2¹ was used for the preparation of 24 vaginal bioadhesive tablet formulations. The independent factors were polymer type (Carbopol 934, HPMC 4000, HEC, and PEG 6000), polymer to drug ratio (1:1, 2:1, and 3:1), and diluent (lactose and mannitol). Vaginal bioadhesive tablets were evaluated for residence time and time required for release 50% of salbutamol sulfate T_50% as dependent variables. The formulations were evaluated in terms of drug content, mass variation, hardness, friability, swelling index, residence time, and in-vitro drug release. Results revealed that polymer and diluent types are the most significant factors in both residence time and T_50%. A strong positive correlation (0.91) between in-vitro and ex-vivo permeation was observed, which predict the best in-vivo performance of salbutamol vaginal bioadhesive tablet. Thus, salbutamol sulfate vaginal bioadhesive tablets could be a successful remedy for preterm labor.

Release Kinetics of Nicotine Loaded onto Mesoporous Silicate Materials for Use in Nicotine Replacement Therapy

OBJECTIVE

In this work, the loading of nicotine onto mesoporous silicate materials and its release into a phosphate buffer solution at 37°C were investigated.

METHODS

The mesoporous silicate materials designated as MCM-41 were prepared with different pore sizes via using alkyltrimethylammonium bromide surfactants with different alkyl chain lengths of carbon atoms 12, 14, and 16. The mesoporous silicate systems were characterized by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), N2-adsorption-desorption isotherms, and FT-IR spectroscopy.

RESULTS

Loading of nicotine was confirmed by FTIR and thermal gravimetric analysis and was determined by High-Performance Liquid Chromatography (HPLC).

CONCLUSION

A slight increase in loading capacity with increasing pore size was observed, with a loading capacity of about 17% for MCM-41(16). The release of nicotine was monitored by HPLC and was almost complete for MCM-41(14) and MCM-41(16) in 8 h.

Vitamin B12 buccoadhesive tablets: auspicious non-invasive substitute for intra muscular injection: formulation, in vitro and in vivo appraisal

Attempting to prepare a convenient bioavailable formulation of vitamin B₁₂ (cyanocobalamin), 17 tablet formulations were prepared by direct compression. Different concentrations of hydroxypropyl methyl cellulose (HPMC), carbopol 971p (CP971p), and chitosan (Cs) were used. The tablets were characterized for thickness, weight, drug content, hardness, friability, surface pH, in vitro drug release, and mucoadhesion. Kinetic analysis of the release data was conducted. Vitamin B₁₂ bioavailability from the optimized formulations was studied on rabbits by the aid of enzyme-linked immunosorbent assay. Neurotone^® I.M. injection was used for comparison. HPMC (F1-F4), CP971p (F5-F8), and HPMC/CP971p (F12-F15)-based formulations showed acceptable mechanical properties. The formulated tablets showed maximum swelling indices of 232 ± 0.13. The surface pH values ranged from 5.3 ± 0.03 to 6.6 ± 0.02. Bioadhesive force ranged from 66 ± 0.6 to 150 ± 0.5 mN. Results showed that CP971p-based tablets had superior in vitro drug release, mechanical, and mucoadhesive properties. In vitro release date of selected formulations were fitted well to Peppas model. HPMC/CP971p-based formulations showed bioavailability up to 2.7-folds that of Neurotone^® I.M. injection.

Polymer adhesion predictions for oral dosage forms to enhance drug administration safety. Part 3: Review of in vitro and in vivo methods used to predict esophageal adhesion and transit time

The oral cavity is frequently used to administer pharmaceutical drug products. This route of administration is seen as the most accessible for the majority of patients and supports an independent therapy management. For current oral dosage forms under development, the prediction of their unintended mucoadhesive properties and esophageal transit profiles would contribute for future administration safety, as concerns regarding unintended adhesion of solid oral dosage forms (SODF) during oro-esophageal transit still remain. Different in vitro methods that access mucoadhesion of polymers and pharmaceutical preparations have been proposed over the years. The same methods might be used to test non-adhesive systems and contribute for developing safe-to-swallow technologies. Previous works have already investigated the suitability of non-animal derived in vitro methods to assess such properties. The aim of this work was to review the in vitro methodology available in the scientific literature that used animal esophageal tissue to evaluate mucoadhesion and esophageal transit of pharmaceutical preparations. Furthermore, in vivo methodology is also discussed. Since none of the in vitro methods developed are able to mimic the complex swallowing process and oro-esophageal transit, in vivo studies in humans remain as the gold standard.

Mucoadhesive oral films: The potential for unmet needs

Oral drug delivery is the most common route of drug administration. Nevertheless, there are some important limitations that reinforce the need for developing new drug delivery systems. Mucoadhesive oral films (MOF) are promising dosage forms that adhere to the oral mucosa and deliver the drug through it, which present several advantages. These include: bypassing the hepatic first pass effect, fast onset of action, ease of transportation and handling. The use of such dosage form is beneficial for drugs that have poor oral bioavailability and also for drugs that need to be rapidly absorbed. In spite of the known benefits, the number of marketed MOF is still quite small. This review explores the products under development and corresponding clinical trials in respect to their status, therapeutic indication, companies involved and technologies. In this way, it was possible to identify the preferred therapeutic indications, new research and market trends as well as future prospects of MOF. Moreover, it is reasonable to expect an increase in the number of products on the market due to their great potential to satisfy unmet medical needs.

Oral local drug delivery and new perspectives in oral drug formulation

Modern pharmaceutical science has provided us with a wide range of substances to be administered with a wide large variety of dosage forms. Local drug delivery systems have been used for a long time; in particular, for the local therapy of diseases affecting the oral cavity. Although these diseases are often extremely responsive to local therapy, the mouth often presents various difficulties in the application of topical compounds (owing to saliva and the mouth's different functions), resulting in a short retention time of dosage forms with a consequent low therapeutic efficacy. To resolve these limitations, research today concentrates on the development of bioadhesive formulations. This review focuses on the permeability features of oral mucosa, the rationale of oral local drug delivery, and new potential bioadhesive local delivery systems. Furthermore, the most promising mucoadhesive systems proposed to locally treat oral diseases are discussed.

Effect of protein release rates from tablet formulations on the immune response after sublingual immunization

Dry vaccine formulations for sublingual administration would provide great advantages for public health use, especially in developing countries, since they are easy to administer and might also have improved stability properties. This study investigates the influence of protein release rate from mucoadhesive two-layer tablets on the elicited antibody responses after sublingual immunization. Two fast release tablets, one based on a mixture of lactose and microcrystalline cellulose (MCC) and one protein coated ethylcellulose (EC) tablet, and three hydrophilic matrix tablets with extended release (ER) properties based on HPMC 90 SH 100000 or Carbopol® 974-P NF were tested. The in vitro release profiles of the model protein ovalbumin (OVA) from these tablets were characterized and correlated to the in vivo potential of the tablets to induce an immune response after sublingual immunization in BALB/c mice. It could be concluded that a tablet with fast protein release elicits antibody titres not significantly different from titres obtained with OVA in solution, whereas low immune responses were observed with a slow release of OVA from the ER formulations. Thus, an ER tablet seems not favorable for vaccine delivery to the sublingual mucosa. Thus, we can present a fast releasing tablet formulation with attractive features for sublingual immunization, whereas the use of ER formulations for sublingual vaccination has to be investigated more in detail.

Influence of pH modifiers and HPMC viscosity grades on nicotine-magnesium aluminum silicate complex-loaded buccal matrix tablets

Hydroxypropyl methylcellulose (HPMC) tablets containing nicotine-magnesium aluminum silicate (NCT-MAS) complex particles and pH modifiers, namely, sodium chloride, citric acid, and magnesium hydroxide, were prepared using the direct compression method. The effects of HPMC viscosity grades and pH modifiers on NCT release and permeation of the matrix tablets were examined. The results showed that the higher the viscosity grade of HPMC that was used in the tablets, the lower was the unidirectional NCT release rate found. The unidirectional NCT permeation was not affected by the viscosity grade of HPMC because the NCT diffusion through the mucosal membrane was the rate-limiting step of the permeation. Incorporation of magnesium hydroxide could retard NCT release, whereas the enhancement of unidirectional NCT release was found in the tablets containing citric acid. Citric acid could inhibit NCT permeation due to the formation of protonated NCT in the swollen tablets at an acidic pH. Conversely, the NCT permeation rate increased with the use of magnesium hydroxide as a result of the neutral NCT that formed at a basic microenvironmental pH. The swollen HPMC tablets, with or without pH modifiers, gave sufficient adhesion to the mucosal membrane. Furthermore, the addition of magnesium hydroxide to the matrix tablets was the major factor in controlling buccal delivery of NCT. This study suggests that the NCT-MAS complex-loaded HPMC tablets, which contained magnesium hydroxide, are potential buccal delivery systems of NCT.

Behaviour of HPMC compacts investigated using UV-imaging

The aim of the study was to visualize the behaviour of the hydroxypropyl methylcellulose (HPMC) in a buffer solution using UV imaging. The obtained results were related to rheological measurements in order to gain insight into critical polymer properties affecting drug release. Two viscosity grades of HPMC, 15cP and 50 cP, were used. The behaviour of the polymer at the surface of the compact was observed by UV-imaging at 214 nm for 90 min in a stagnant buffer solution and in presence of flow. Steady shear and oscillatory shear measurements were conducted to determine the rheological characteristics. Three distinctive phases could be detected by real-time UV-imaging of the HPMC; gel formation due to water penetration, further expansion of the gel into solution and finally steady conditions, where a critical polymer concentration that can withstand the shear forces without eroding was observed. The critical concentration corresponded to the rheologically determined gel point, which is the lowest concentration where a 3D-network is obtained. Higher viscosity grade HPMC swelled more rapidly and lead to a thicker gel layer, which was more resistant towards the shear forces due to the applied flow. The results showed that UV imaging is suitable for obtaining both qualitative and quantitative information on polymer behaviour.

Formulation and Characterization of Oral Mucoadhesive Chlorhexidine Tablets Using Cordia myxa Mucilage

BACKGROUND

The dilution and rapid elimination of topically applied drugs due to the flushing action of saliva is a major difficulty in the effort to eradicate infections of oral cavity. Utilization a proper delivery system for incorporation of drugs has a major impact on drug delivery and such a system should be formulated for prolonged drug retention in oral cavity.

OBJECTIVES

The aim of the present study was the use of mucilage of Cordia myxa as a mucoadhesive material in production of chlorhexidine buccal tablets and its substitution for synthetic polymers such as HPMC.

MATERIALS AND METHODS

The influence of mucilage concentration on the physicochemical responses (hardness, friability, disintegration time, dissolution, swelling, and muco-adhesiveness strength) was studied and swelling of mucilage and HPMC were compared. The evaluated responses included pharmacopoeial characteristics of tablets, the force needed to separate tablets from mucosa, and the amount of water absorbed by tablets.

RESULTS

In comparison to HPMC, the rise of mucilage concentration in the formulations increased disintegration time, drug dissolution rate, and reduced MDT. Also, compared to 30% HPMC, muco-adhesiveness strength of buccal tablets containing 20% mucilage was significantly higher.

CONCLUSIONS

It can be concluded that the presence of Cordia myxa powdered mucilage may significantly affect the tablet characteristics, and increasing in muco-adhesiveness may be achieved by using 20% w/w mucilage.

Preparation and characterization of nicotine-magnesium aluminum silicate complex-loaded sodium alginate matrix tablets for buccal delivery

Nicotine (NCT) buccal tablets consisting of sodium alginate (SA) and nicotine-magnesium aluminum silicate (NCT-MAS) complexes acting as drug carriers were prepared using the direct compression method. The effects of the preparation pH levels of the NCT-MAS complexes and the complex/SA ratios on NCT release, permeation across mucosa, and mucoadhesive properties of the tablets were investigated. The NCT-MAS complex-loaded SA tablets had good physical properties and zero-order release kinetics of NCT, which indicate a swelling/erosion-controlled release mechanism. Measurement of unidirectional NCT release and permeation across porcine esophageal mucosa using a modified USP dissolution apparatus 2 showed that NCT delivery was controlled by the swollen gel matrix of the tablets. This matrix, which controlled drug diffusion, resulted from the molecular interactions of SA and MAS. Tablets containing the NCT-MAS complexes prepared at pH 9 showed remarkably higher NCT permeation rates than those containing the complexes prepared at acidic and neutral pH levels. Larger amounts of SA in the tablets decreased NCT release and permeation rates. Additionally, the presence of SA could enhance the mucoadhesive properties of the tablets. These findings suggest that SA plays the important role not only in controlling release and permeation of NCT but also for enhancing the mucoadhesive properties of the NCT-MAS complex-loaded SA tablets, and these tablets demonstrate a promising buccal delivery system for NCT.

Alginate-magnesium aluminum silicate films for buccal delivery of nicotine

Sodium alginate-magnesium aluminum silicate (SA-MAS) dispersions with nicotine (NCT) were prepared at different pHs and characterized for the particle size and zeta potential, NCT adsorbed by MAS, and flow behavior before film casting. The physicochemical properties, NCT content, in vitro bioadhesive property, and NCT release and permeation of the NCT-loaded SA-MAS films were investigated. This study showed that incorporation of NCT into the SA-MAS dispersions caused a change in particle size and flow behavior and that NCT could be adsorbed by MAS. The formation of protonated NCT at acidic and neutral pHs could interact with negatively charged MAS via an electrostatic force, resulting in the formation of NCT-MAS flocculates/complexes that could act as microreservoirs in the films. The NCT-loaded SA-MAS films prepared at pH 5 yielded the highest NCT content due to non-significant loss of NCT during drying. Moreover, pH of the preparation also affected the crystallinity and thermal properties of the films. The NCT release and permeation across the mucosal membrane of the films could be described using a matrix diffusion controlled mechanism. In addition, the NCT-loaded SA-MAS films also possessed a bioadhesive property for adhesion to the mucosal membrane. This finding suggests that the NCT-loaded SA-MAS films composed of numerous NCT-MAS complexes as microreservoirs demonstrated a strong potential for use as a buccal delivery system.

Polymers for mucoadhesive drug delivery system: a current status

To overcome the relatively short gastrointestinal (GI) time and improve localization for oral controlled or sustained release drug delivery systems, bioadhesive polymers that adhere to the mucin/epithelial surface are effective and lead to significant improvement in oral drug delivery. Improvements are also expected for other mucus-covered sites of drug administration. Bioadhesive polymers find application in the eye, nose, and vaginal cavity as well as in the GI tract, including the buccal cavity and rectum. This article lays emphasis mainly on mucoadhesive polymers, their properties, and their applications in buccal, ocular, nasal, and vaginal drug delivery systems with its evaluation methods.

Characterization and ornidazole releasein vitro of a novel composite film prepared with chitosan/poly(vinyl alcohol)/alginate

To create a moist environment for rapid wound healing, a new C-P-A film with sustained antibacterial capacity had been developed by the casting/solvent evaporation method. This new type of C-P-A film consists of a chitosan top layer and sodium alginate sublayer separated by an ornidazole-incorporated poly(vinyl alcohol) layer, exhibited perfect binding characteristics among the three layers. Physical characterization of the C-P-A film showed that the triple-layerd film had excellent light transmittance, control of water vapor transmission rate, and fluid drainage ability promotion, compared with the single-layer film. From the in vitro release studies, about 90% of OD was released from the composite films within 60 min, and no significant difference was observed in cumulative release percentage with increases in the drug content. The composite film at low concentration of OD (1.0 mg/cm2) showed effective antimicrobial activity in the cultures of Staphylococcus aureus and Escherichia coli in agar plates. The results obtained in this work indicated that the new type of C-P-A composite film incorporated with ornidazole has the potential for wound dressing application.

Buccal bioadhesive drug delivery--a promising option for orally less efficient drugs

Rapid developments in the field of molecular biology and gene technology resulted in generation of many macromolecular drugs including peptides, proteins, polysaccharides and nucleic acids in great number possessing superior pharmacological efficacy with site specificity and devoid of untoward and toxic effects. However, the main impediment for the oral delivery of these drugs as potential therapeutic agents is their extensive presystemic metabolism, instability in acidic environment resulting into inadequate and erratic oral absorption. Parenteral route of administration is the only established route that overcomes all these drawbacks associated with these orally less/inefficient drugs. But, these formulations are costly, have least patient compliance, require repeated administration, in addition to the other hazardous effects associated with this route. Over the last few decades' pharmaceutical scientists throughout the world are trying to explore transdermal and transmucosal routes as an alternative to injections. Among the various transmucosal sites available, mucosa of the buccal cavity was found to be the most convenient and easily accessible site for the delivery of therapeutic agents for both local and systemic delivery as retentive dosage forms, because it has expanse of smooth muscle which is relatively immobile, abundant vascularization, rapid recovery time after exposure to stress and the near absence of langerhans cells. Direct access to the systemic circulation through the internal jugular vein bypasses drugs from the hepatic first pass metabolism leading to high bioavailability. Further, these dosage forms are self-administrable, cheap and have superior patient compliance. Developing a dosage form with the optimum pharmacokinetics is a promising area for continued research as it is enormously important and intellectually challenging. With the right dosage form design, local environment of the mucosa can be controlled and manipulated in order to optimize the rate of drug dissolution and permeation. A rational approach to dosage form design requires a complete understanding of the physicochemical and biopharmaceutical properties of the drug and excipients. Advances in experimental and computational methodologies will be helpful in shortening the processing time from formulation design to clinical use. This paper aims to review the developments in the buccal adhesive drug delivery systems to provide basic principles to the young scientists, which will be useful to circumvent the difficulties associated with the formulation design.

Mucoadhesive properties of cross-linked high amylose starch derivatives

Acetate (Ac-), aminoethyl (AE-) and carboxymethyl (CM-)derivatives of cross-linked high amylose starch (HASCL-6) were previously shown to control, over more than 20h, the release of drugs from highly loaded (up to 60% drug) monolithic tablets. It was now of interest to evaluate their mucoadhesive characteristics in view of further utilization in buccal or vaginal transmucosal delivery. The present study shows that ionic AE-HASCL-6 and CM-HASCL-6 derivatives exhibit higher mucoadhesive properties than neutral HASCL-6 and Ac-HASCL-6, suggesting that the ionic groups introduced on cross-linked starch chains play a role in the bioadhesion process. The adhesiveness seemed related to capillary attraction forces. Surface adhesion parameters were calculated for slabs based on the mentioned polymers and corroborated with their swelling behavior at various pH changes. The positively charged AE-derivatives presented a higher adhesion at acidic pH, being thus recommended for vaginal delivery, whereas the negatively charged derivatives (CM-HASCL-6) exhibited a better adhesion at neutral pH, being thus more appropriate for buccal delivery.

In vivo evaluation of nicotine lyophilised nasal insert in sheep

The nasal route offers an attractive means of delivering a drug directly to the systemic circulation and avoiding hepatic first-pass metabolism, although rapid mucociliary clearance can be detrimental to nasal absorption. The in vitro and in vivo characteristics of a nasal insert formulation prepared by lyophilisation of a viscous HPMC gel solution designed to overcome this problem were studied. In vitro release of nicotine from the lyophilised insert was compared with powder and spray formulations. Stability and characterisation studies were carried out using dynamic vapour sorption, scanning electron microscopy and HPLC analysis. Nicotine formulations were administered to eight wether sheep in a randomised four-way cross-over study, and plasma nicotine assessed comparing the nasal insert formulation with conventional nasal powder, nasal spray and IV doses. In vitro release studies demonstrated prolonged nicotine release from the nasal insert formulation compared to a powder and liquid. In vivo plasma profiles appeared to show prolonged plasma nicotine levels compared to the conventional formulations, although T(max), C(max) and AUC parameters for the insert were not significantly different due to high variability in the pharmacokinetic data. In conclusion, the nasal insert displayed a promising prolonged plasma profile, which must be investigated further to provide statistical significance to prove the effect.

Development of three layered buccal compact containing metoprolol tartrate by statistical optimization technique

The objective of this work to evaluate the effect of formulation variables on release properties and bioadhesive strength in development of three layered buccal compact containing highly water-soluble drug metoprolol tartrate (MT) by statistical optimization technique. Formulations were prepared based on rotatable central composite design with peripheral polymer ratio (carbopol 934P: HPMC 4KM) and core polymer ratio (HPMC 4KM: sodium alginate) as two independent formulation variables. The three layered buccal compact comprises a peripheral layer, core layer and backing layer. Four dependent (response) variables were considered: bioadhesion force, percentage MT release at 8 h, T50% (time taken to release 50% of drug) and release exponent (n). The release profile data was subjected to curve fitting analysis for describing the release mechanism of MT from three layered buccal compact. The main effects and interaction terms was quantitatively evaluated by quadratic model. The decrease in MT release was observed with an increase in both the formulation variables and as the carbopol: HPMC ratio increases the bioadhesive strength also increases. The desirability function was used to optimize the response variables, each having a different target and the observed responses were highly agreed with experimental values. The results demonstrate the feasibility of the model in the development of three layered buccal compact containing highly water-soluble drug MT.