PLGA nanoparticles containing praziquantel: effect of formulation variables on size distribution

Sorafenib and Piperine co-loaded PLGA nanoparticles: Development, characterization, and anti-cancer activity against hepatocellular carcinoma cell line

Hepatocellular carcinoma (HCC) exhibits high mortality rates in the advanced stage (>90 %). Sorafenib (SORA) is a targeted therapy approved for the treatment of advanced HCC; however, the reported response rate to such a therapeutic is suboptimal (<3%). Piperine (PIP) is an alkaloid demonstrated to exert a direct tumoricidal activity in HCC and improve the pharmacokinetic profiles of anticancer drugs including SORA. In this study, we developed a strategy to improve efficacy outcomes in HCC using PIP as an add-on treatment to support the first-line therapy SORA using biodegradable Poly (D, L-Lactide-co-glycolide, PLGA) nanoparticles (NPs). SORA and PIP (both exhibit low aqueous solubility) were co-loaded into PLGA NPs (PNPs) and stabilized with various concentrations of polyvinyl alcohol (PVA). The SORA and PIP-loaded PNPs (SP-PNPs) were characterized using Fourier Transform Infrared (FTIR) Spectroscopy, X-ray Powder Diffraction (XRD), Dynamic Light Scattering (DLS), and Scanning Electron Microscopy (SEM), Release of these drugs from SP-PNPs was investigated in vitro at both physiological and acidic pH, and kinetic models were employed to assess the mechanism of drug release. The in vitro efficacy of SP-PNPs against HCC cells (HepG2) was also evaluated. FTIR and XRD analyses revealed that the drugs encapsulated in PNPs were in an amorphous state, with no observed chemical interactions among the drugs or excipients. Assessment of drug release in vitro at pH 5 and 7.4 showed that SORA and PIP loaded in PNPs with 0.5 % PVA were released in a sustained manner, unlike pure drugs, which exhibited relatively fast release. SP-PNPs with 0.5 % PVA were spherical, had an average size of 224 nm, and had a high encapsulation efficiency (SORA ∼ 82 %, PIP ∼ 79 %), as well as superior cytotoxicity compared to SORA monotherapy in vitro. These results suggest that combining PIP with SORA using PNPs may be an effective strategy for the treatment of HCC and may set the stage for a comprehensive in vivo study to evaluate the efficacy and safety of this novel formulation using a murine HCC model.

Characterization of chitosan/Persian gum nanoparticles for encapsulation of Nigella sativa extract as an antiviral agent against avian coronavirus

The aim of this study was to investigate the physicochemical characteristics of nanoparticles formed by the ionic gelation method between chitosan and water-soluble fraction of Persian gum (WPG) for encapsulation of Nigella sativa extract (NSE) as an antiviral agent. Our findings revealed that the particle size, polydispersity index (PDI), and zeta potential of the particles were in the range of 316.7-476.6 nm, 0.259-0.466, and 37.0-58.1 mV, respectively. The amounts of chitosan and WPG as the wall material and the NSE as the core had a considerable impact on the nanoparticle properties. The proper samples were detected at 1:1 chitosan:WPG mixing ratio (MR) and NSE concentration of 6.25 mg/mL. Fourier-transformed infrared (FTIR) spectroscopy proved the interactions between the two biopolymers. The effect of NSE on infectious bronchitis virus (IBV) known as avian coronavirus, was performed by the in-ovo method determining remarkable antiviral activity of NSE (25 mg/mL) and its enhancement through encapsulation in the nanoparticles. These nanoparticles containing NSE could have a promising capability for application in both poultry industry and human medicine as an antiviral product.

Development of Epigallocatechin 3-gallate-Loaded Hydrogel Nanocomposites for Oral Submucous Fibrosis

Oral submucous fibrosis (OSF) is a chronic progressive disease associated with increased collagen deposition and TGF-β1 release. The current therapy and management have been a limited success due to low efficacy and adverse drug reactions. This study aimed to evaluate epigallocatechin 3-gallate (EGCG) encapsulated nanoparticles loaded mucoadhesive hydrogel nanocomposite (HNC) for OSF. Developed HNC formulations were evaluated for their permeation behaviour using in vitro as well as ex vivo studies, followed by evaluation of efficacy and safety by in vivo studies using areca nut extract-induced OSF in rats. The disease condition in OSF-induced rats was assessed by mouth-opening and biochemical markers. The optimized polymeric nanoparticles exhibited the required particle size (162.93 ± 13.81 nm), positive zeta potential (22.50 ± 2.94 mV) with better mucoadhesive strength (0.40 ± 0.002 N), and faster permeation due to interactions of the positively charged surface with the negatively charged buccal mucosal membrane. HNC significantly improved disease conditions by reducing TGF-β1 and collagen concentration without showing toxicity and reverting the fibroid buccal mucosa to normal. Hence, the optimized formulation can be further tested to develop a clinically alternate therapeutic strategy for OSF.

Formulation of Folate Receptor-Targeted Silibinin-Loaded Inhalable Chitosan Nanoparticles by the QbD Approach for Lung Cancer Targeted Delivery

Aim: Targeted delivery of chemotherapeutics by functionalized nanoparticles exhibits a wonderful prospect for cancer treatment. The main objective of this research was to develop folate receptor-targeted silibinin (SB)-loaded inhalable polymeric nanoparticles (FA-CS-SB-NPs) for the treatment of lung cancer. Method: The qbD approach was implemented to prepare SB-loaded nanoparticles. Folic acid was conjugated by electrostatic conjugation in an optimized batch. The therapeutic potentials of formulations were determined using a lung cancer cell-bearing rat model. Result: Optimized formulation exhibited a spherical surface with a mean particle size of 275 ± 1.20 nm, a PDI of 0.234 ± 0.07, a ζ-potential of 32.50 ± 0.21, an entrapment efficiency of 75.52 ± 0.87%, and a CDR of 63.25 ± 1.21% at 48 h. Aerodynamic behaviors such as the mass median aerodynamic diameter (MMAD) and geometric size distribution (GSD) were found to be 2.75 ± 1.02 and 3.15 ± 0.88 μm, respectively. After 24 h of incubation with FA-CS-SB-NPs, the IC50 value was found to be 24.5 g/mL. FA-SB-CS-NPs maintained a significantly higher deposition of SB in lung tissues. Conclusions: Thus, the noninvasive nature and target specificity of FA-CS-SB-NPs pave the way for pulmonary delivery for treating lung cancer.

Influence of drug molecular weight on self-assembly and intestinal permeation of polymer-based nanocarriers

For oral delivery, the physicochemical properties of nanocarriers are decisive factors for permeation through the intestinal epithelium. These properties are determined by the composition of the nanocarriers as well as by the process parameters during their self-assembly. For macromolecular drugs, there is still little understanding of the drug-polymer interactions during nanocarrier self-assembly and the effects on carrier properties. In this study, the effect of drug molecular weight on nanocarrier self-assembly, physicochemical properties of nanocarriers as well as their permeation across the intestinal epithelium was investigated. Our results show that the drug molecular weight impacts the physicochemical properties of nanocarriers. Further, the physicochemical properties of the nanocarriers, governed by the molecular weight of the drug, determine their permeation properties across the intestinal epithelium. Comparative in vitro and ex vivo studies revealed that intestinal absorption is dependent on both, the properties of the tissue as well as properties of the carrier system. In conclusion, the molecular weight of drug payload is a key factor determining the physiochemical properties of polymeric nanocarriers and is closely linked to their oral absorption. Using different preclinical models to evaluate intestinal permeation of nanocarriers allows for novel insights into key formulation properties governing oral bioavailability.

Imiquimod-Loaded Chitosan-Decorated Di-Block and Tri-Block Polymeric Nanoparticles Loaded In Situ Gel for the Management of Cervical Cancer

BACKGROUND

Cervical intraepithelial neoplasia, the predisposing factor for cervical cancer (CC), is caused by human papillomavirus (HPV) infection and can be treated with imiquimod (IMQ). However, poor water solubility and side effects such as local inflammation can render IMQ ineffective. The aim of this study is to design a prolonged release nano system in combination with mucoadhesive-thermosensitive properties for an effective vaginal drug delivery.

METHODS

Polylactic-co-glycolic acid (PLGA), polycaprolactone (PCL), poly lactide-co-caprolactone (PLA-PCL), and poly L-lactide-co-caprolactone-co-glycolide (PLGA-PCL) were used to create IMQ nanoparticles. Chitosan (CS) was then added to the surfaces of the IMQ NPs for its mucoadhesive properties. The NPs were then incorporated into poloxamer hydrogels. The NPs' size and morphology, encapsulation efficiency (EE), in vitro drug release, gel characterization, ex vivo drug permeation, and in vitro safety and efficacy were characterized.

RESULTS

Two batches of NPs were prepared, IMQ NPs and CS-coated NPs (CS-IMQ NPs). In general, both types of NPs were uniformly spherical in shape with average particle sizes of 237.3 ± 4.7 and 278.2 ± 5.4 nm and EE% of 61.48 ± 5.19% and 37.73 ± 2.88 for IMQ NPs and CS-IMQ NPs, respectively. Both systems showed prolonged drug release of about 80 and 70% for IMQ NPs and CS-IMQ NPs, respectively, within 48 h. The gelation temperatures for the IMQ NPs and CS-IMQ NPs were 30 and 32 °C, respectively; thus, suitable for vaginal application. Although ex vivo permeability showed that CS-IMQ NPs showed superior penetration compared to IMQ NPs, both systems enhanced drug penetration (283 and 462 µg/cm2 for IMQ NPs and CS-IMQ NPs, respectively) relative to the control (60 µg/cm2). Both systems reduced the viability of cervical cancer cells, with a minimal effect of the normal vaginal epithelium. However, IMQ NPs exhibited a more pronounced cytotoxic effect. Both systems were able to reduce the production of inflammatory cytokines by at least 25% in comparison to free IMQ.

CONCLUSION

IMQ and CS-IMQ NP in situ gels enhanced stability and drug release, and improved IMQ penetration through the vaginal tissues. Additionally, the new systems were able to increase the cytotoxic effect of IMQ against CC cells with a reduction in inflammatory responses. Thus, we believe that these systems could be a good alternative to commercial IMQ systems for the management of CC.

Effect of polymeric stabilizers on the size and stability of PLGA paclitaxel nanoparticles

The aim of this study is to formulate polymeric paclitaxel nanoparticles with various stabilizers to improve solubility, enhance stability, maximize therapeutic efficacy and minimize detrimental toxicities of paclitaxel. In this study, trastuzumab-guided poly lactic-co-glycolic acid (PLGA)-loaded paclitaxel nanoparticles were formulated with pluronic F-127, polyvinyl alcohol (PVA), poloxamer 407, Tween-80, span 20, sodium dodecyl sulfate (SDS), and sodium lauryl sulfate (SLS) at different concentrations (0.5, 1, 1.5 and 2%) using the solvent evaporation method. The nanoparticles were evaluated for physicochemical characteristics and short and long-term stability. The optimum particle size (190 nm ± 12.42 to 350 nm ± 11.1), PDI (0.13 ± 0.02 to 0.2 ± 0.01), surface charge (-19.1mv ± 1.5 to -40.4mv ± 1.6), drug loading (2.43 to 9.5 %) and encapsulation efficiency (greater than 80 %) were obtained with these stabilizers while keeping the polymer concentration, temperature, probe size, amplitude and sonication time constant. The nanoformulations were stably stored at 4 °C. The nanoformulations of paclitaxel with pluronic F-127, polyvinyl alcohol (PVA), and poloxamer 407 were found to be more soluble, stable, uniform in physicochemical properties, and efficient in drug loading and encapsulation for improved therapeutic effects.

Ribociclib Hybrid Lipid-Polymer Nanoparticle Preparation and Characterization for Cancer Treatment

Ribociclib is a newly approved orally administered drug for breast cancer. This study aimed to prepare, characterize, and evaluate hybrid lipid-polymer nanoparticles (PLNs) of ribociclib to enhance its in vitro dissolution rate, pharmacokinetics, and anticancer efficacy. Ribociclib-loaded PLNs were prepared by solvent evaporation using the Box-Behnken design to optimize formulation variables. Particle size, entrapment efficiency, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM), in vitro release cytotoxicity, molecular modeling, and pharmacokinetic studies were examined. The ribociclib-loaded PLN (formula 1, F1) was optimized in terms of particle size (266.9 ± 4.61 nm) and encapsulation efficiency (59.1 ± 2.57 mg/mL). DSC and thermogravimetric characterization showed the absence of a crystalline structure in the prepared PLNs, confirmed by FTIR, and showed no interactions between the components and the drug. AFM showed well-dispersed heterogeneously shaped nanoparticles. The in vitro release profile exhibited significant results for the optimized formula, reaching 100% at 600 and 90 min at pH 6.8 and 1.2, respectively. The low IC₅₀ obtained by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay suggests that optimized PLN might serve as an effective delivery vehicle for cancer treatment, especially breast and lung cancer. Molecular modeling revealed several hydrogen bonds. A pharmacokinetic study in rats showed that the ribociclib formula had a 6.5-fold increase in maximum concentration (C_max) and a 5.6-fold increase in area under the curve (AUC). Regarding the everted intestinal sac absorption, formula 1 increased ribociclib penetration relative to the physical combination and pure medication. In conclusion, optimized PLNs with enhanced physicochemical and cytotoxic properties and improved pharmacokinetic parameters were successfully prepared.

Thermosensitive TMPO-oxidized lignocellulose/cationic agarose hydrogel loaded with deferasirox nanoparticles for photothermal therapy in melanoma

Deferasirox (DFX) is an iron-chelating agent effective in treating various kinds of cancers, which inhibits iron metabolism in cancer cells. The recent study aimed to prepare an injectable thermosensitive hydrogel based on lignocellulose and agarose containing deferasirox-loaded polypyrrole nanoparticles for local drug delivery in a combined chemo-photothermal therapy by laser light irradiation. Polypyrrole nanoparticles containing DFX were made by the emulsification method and optimized. Thermosensitive hydrogels were prepared by quaternary ammonium substituted agarose and TMPO-oxidized lignocellulose at different ratios, and the optimal hydrogel was selected based on gelation time, gelation temperature, and injectability. DFX- loaded polypyrrole nanoparticles were then added to the hydrogel, and the drug release, rheology test, injectability, degradation, and swelling percent, as well as cytotoxicity, and photothermal properties, were studied on B16F10, human melanoma cells. The hydrogel with 2 % anionic lignocellulose and 0.5 % cationic agarose showed the shortest gelation time and the highest mechanical strength. It transferred from a liquid state at 4 °C into a semisolid form at 37 °C with a gelation time of 10.3 min. The nanoparticles loaded in hydrogel showed dose-dependent cytotoxicity. The cytotoxic dose of the drug was reduced by laser light irradiation.

The Idiosyncratic Efficacy of Spironolactone-Loaded PLGA Nanoparticles Against Murine Intestinal Schistosomiasis

Background

Schistosomiasis is a chronic debilitating parasitic disease accompanied with severe mortality rates. Although praziquantel (PZQ) acts as the sole drug for the management of this disease, it has many limitations that restrict the use of this treatment approach. Repurposing of spironolactone (SPL) and nanomedicine represents a promising approach to improve anti-schistosomal therapy. We have developed SPL-loaded poly(lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) to enhance the solubility, efficacy, and drug delivery and hence decrease the frequency of administration, which is of great clinical value.

Methods

The physico-chemical assessment was performed starting with particle size analysis and confirmed using TEM, FT-IR, DSC, and XRD. The antischistosomal effect of the SPL-loaded PLGA NPs against Schistosoma mansoni (S. mansoni)-induced infection in mice was also estimated.

Results

Our results manifested that the optimized prepared NPs had particle size of 238.00 ± 7.21 nm, and the zeta potential was -19.66 ± 0.98 nm, effective encapsulation 90.43±8.81%. Other physico-chemical features emphasized that nanoparticles were completely encapsulated inside the polymer matrix. The in vitro dissolution studies revealed that SPL-loaded PLGA NPs showed sustained biphasic release pattern and followed Korsmeyer-Peppas kinetics corresponding to Fickian diffusion (n<0.45). The used regimen was efficient against S. mansoni infection and induced significant reduction in spleen, liver indices, and total worm count (ρ<0.05). Besides, when targeting the adult stages, it induced decline in the hepatic egg load and the small intestinal egg load by 57.75% and 54.17%, respectively, when compared to the control group. SPL-loaded PLGA NPs caused extensive damage to adult worms on tegument and suckers, leading to the death of the parasites in less time, plus marked improvement in liver pathology.

Conclusion

Collectively, these findings provided proof-of-evidence that the developed SPL-loaded PLGA NPs could be potentially used as a promising candidate for new antischistosomal drug development.

Quality by Design as a Tool in the Optimisation of Nanoparticle Preparation-A Case Study of PLGA Nanoparticles

Nanoparticles can be used as drug carriers in various applications (e.g., in pulmonary drug delivery and mucosal vaccination). For further investigations, such as drug release studies, as well as for cell and tissue targeting, particles with defined properties are needed. The purpose of the study was to show a multi-step systematic method utilising quality by design to ensure the quality of ovalbumin loaded polylactic-co-glycolic acid nanoparticles (OVA-PLGA-NP), which can be delivered to the lung, and to gain knowledge of the preparation method (double-emulsion solvent evaporation method) in an early development process. Within a definitive screening design, several process parameters (OVA, PLGA and stabiliser concentrations, stirring time and stirring speed of inner emulsion and stirring time and stirring speed of double emulsion) were varied to analyse their impact on resulting properties (z-average, PDI, loading efficiency and loading capacity). The results showed that the preparation of the inner emulsion mainly influenced the drug loading, while the parameters of the second emulsifying step controlled the size. Then a central composite response surface design was used to achieve a predictable OVA-PLGA-NP with an average particle size of 700 nm and high drug-loading. This also enabled the demonstration of curvature and interaction of the stabiliser and the PLGA concentration.

Preparation and Antiproliferative Activity Evaluation of Juglone-Loaded BSA Nanoparticles

Purpose: Today, the discovery of novel and effective chemotherapeutic compounds is the main challenge in cancer therapy. In recent years, the anti-tumoral activity of natural naphthoquinone juglone (JUG), present in different parts of walnut trees, has received considerable interest. The purpose of the current study was to prepare and evaluate the in vitro antiproliferative activity of JUG-loaded bovine serum albumin nanoparticles (JUG-BSA NPs). Methods: BSA NPs and JUG-BSA NPs were prepared using the desolvation technique. The NPs were characterized for their particle size (PS), zeta potential (ZP), drug loading (DL) capacity and encapsulation efficiency (EE). The anti-proliferative activity of JUG-BSA NPs was evaluated on A431 and HT29 cancer cell lines using cellular uptake and MTT assays. Results: The PS and ZP values of JUG-BSA NPs were 85 ± 6.55 nm and -29.6 mV, respectively. The DL capacity and EE were 3.7% to 5% and 50.4% to 94.6%, respectively. The cytotoxicity of JUG-BSA NPs was significantly less on both cultured A431 and HT29 cells at the studied concentrations when compared to free JUG. However, the effect was not very substantial, particularly at high levels. Conclusion: In conclusion, BSA NPs can be used as a suitable and safe carrier for the delivery of JUG, a cytotoxic hydrophobic natural compound.

Evaluation of thermosensitive chitosan hydrogel containing gefitinib loaded cellulose acetate butyrate nanoparticles in a subcutaneous breast cancer model

In the present study, gefitinib loaded cellulose acetate butyrate nanoparticles (Gnb-NPs) were prepared and then incorporated into thermo-sensitive chitosan/β-glycerophosphate hydrogels for intratumoral administration in mice bearing breast cancer. Accordingly, Gnb-NPs were prepared using the solvent evaporation process and optimized by applying a two-level fractional factorial design. Properties of NPs, including particle size, zeta potential (ZP), polydispersity index (PdI), encapsulation efficiency (EE) % and drug loading (DL) %, were investigated; the optimized Gnb-NPs were then loaded in chitosan hydrogels (Gnb-NPs-Hydrogel). The formulated Gnb-NPs-Hydrogel was assessed in terms of gelling time, release behavior, injectability, swelling and degradation behavior. The anti-cancer efficacy of Gnb-NPs-Hydrogel was evaluated in vitro against the 4 T1 breast cancer cell line and in vivo in breast tumor bearing mice. The optimized formulation showed spherical particles with the size of 156.50 ± 2.40 nm, PdI of 0.20 ± 0.002, ZP of -4.90 ± 0.04 mV, EE of 99.77 ± 0.09 % and DL of 20.59 ± 0.05 %. Incorporating Gnb-NPs into the hydrogel led to the decrease of the drug release rate. Gnb-NPs-Hydrogel displayed a greater cytotoxic effect in comparison to the free Gnb and Gnb-Hydrogel in 4 T1 cancer cells. Furthermore,intratumorallyinjectedGnb-NPs-Hydrogel showed the strongest antitumor efficacy in vivo. The superior performance of Gnb-NPs-Hydrogel, thus, demonstrated its potential for the treatment of breast cancer.

Development and Optimization of Osimertinib-loaded Biodegradable Polymeric Nanoparticles Enhance In-vitro Cytotoxicity in Mutant EGFR NSCLC Cell Models and In-vivo Tumor Reduction in H1975 Xenograft Mice Models

Osimertinib (OMB), a third-generation EGFR inhibitor, specifically and irreversibly inhibits EGFR_T790M mutant form. Nevertheless, its clinical use is limited due to poor solubility, low absorption, and oral bioavailability. To overcome the low therapeutic capabilities of the free drug, we developed OMB-loaded PCL or CHS nanoparticles and characterized them. Among fifteen devised nanoparticle formulations (Npfs), OMB-PCL-f3, f9, and OMB-CHS-f3 showed great characteristics such as particle size (ranges from 101.3 ± 8.2 to 119.7 ± 10.4 nm), zeta potential (-36.4 ± 3.2 to -31.7 ± 3.9 mV), and polydispersity index (0.227 ± 0.037 to 0.261 ± 0.025). The % entrapment (91.25 ± 5.84 to 95.25 ± 5.88) and drug loading (29.64 ± 2.38 to 33.59 ± 2.36) indicated the formulation optimization. OMB-CHS-f3 demonstrated long-term in-vitro release, with a % cumulative OMB release of 99.99 ± 2.67 within 24 h, and the cytotoxicity of OMB-CHS-f3 showed 2.6- and 2.4-fold superior activity in mutant EGFR harboring H1975 and PC-9 cells, respectively, compared to plain OMB. Quantitative assessment of OMB cellular uptake from OMB-CHS-f3 showed superior drug accumulation of 81.59 ± 5.8% and 77.31 ± 4.6% in H1975 and PC-9 cells which was more than OMB-CHS-f9 and plain OMB. Flow cytometric cell cycle analysis revealed that OMB-CHS-f3 triggered G2/M phase arrest greater than OMB-PCL-f9 and plain OMB. In vivo, OMB-CHS-f3 Npf treatment reduced tumor size and body weight gain compared to Tagrisso treatment (p < 0.05). These findings showed that chitosan-coated OMB Npfs might improve outcomes by overcoming complications, including resistance and disease recurrence in NSCLC patients.

Dual Vinorelbine bitartrate and Resveratrol Loaded Polymeric Aqueous core Nanocapsules for Synergistic Efficacy in Breast Cancer

AIM

The current study focused on the development and evaluation of aqueous core nanocapsules (ACNs) as an effective carrier to deliver an optimal synergistic combination of a highly water soluble Vinorelbine bitartrate (VRL) and a poorly water-soluble Resveratrol (RES) for treatment of breast cancer.

METHODS

Various molar ratios of VRL to RES were screened against MCF-7 cell lines to determine the synergistic effects using Chou-Talalay method. Synergistic ratio of therapeutic agents was then incorporated into aqueous core nanocapsules utilizing a double emulsion solvent evaporation technique to yield dual drug loaded nanocapsules (dd-ACNs). The dd-ACNs were optimized using Box-Behnken design and characterized for physicochemical parameters such as particle size, zeta potential, polydispersity index, total drug content and encapsulation efficiency, surface morphology, drug excipient compatibility by FTIR and DSC, release kinetics, toxicity studies and anticancer efficacy (in-vitro and in-vivo).

RESULTS

Results demonstrated that the combination exhibited maximum synergy when higher doses of VRL were combined with smaller doses of RES (1:1, 5:1, and 10:1). The dual drug loaded ACNs were found to be stable and depicted a core-shell structure, narrow size range (150.2 ± 3.2 nm) with enhanced encapsulation (80% for VRL and 99% for RES). Moreover, the dd-ACNs were 5 times more efficacious in-vitro than a combination of free drugs, while reducing systemic toxicity. Also, pre-clinical evaluation of dd-ACNs also depicted drastic reduction of tumor volume as compared tp pristine VRL and physical combination of drugs.

CONCLUSION

The developed dd-ACNs can be applied as potential carrier for delivery of combination of chemotherapeutics at a synergistic ratio at tumor site.

Effect of Solvents, Stabilizers and the Concentration of Stabilizers on the Physical Properties of Poly(d,l-lactide-co-glycolide) Nanoparticles: Encapsulation, In Vitro Release of Indomethacin and Cytotoxicity against HepG2-Cell

A biocompatible, biodegradable and FDA-approved polymer [Poly lactic-co-glycolic acid (PLGA)] was used to prepare the nanoparticles (NPs) to observe the effect of solvents, stabilizers and their concentrations on the physical properties of the PLGA-NPs, following the encapsulation and in vitro release of Indomethacin (IND). PLGA-NPs were prepared by the single-emulsion solvent evaporation technique using dichloromethane (DCM)/chloroform as the organic phase with Polyvinyl-alcohol (PVA)/Polyvinylpyrrolidone (PVP) as stabilizers to encapsulate IND. The effects of different proportions of PVA/PVP with DCM/chloroform on the physiochemical properties (particle size, the polydispersity index, the zeta potential by Malvern Zetasizer and morphology by SEM) of the NPs were investigated. DSC was used to check the physical state, the possible complexation of PLGA with stabilizer(s) and the crystallinity of the encapsulated drug. Stabilizers at all concentrations produced spherical, regular-shaped, smooth-surfaced discrete NPs. Average size of 273.2–563.9 nm was obtained when PVA (stabilizer) with DCM, whereas it ranged from 317.6 to 588.1 nm with chloroform. The particle size was 273.2–563.9 nm when PVP was the stabilizer with DCM, while it was 381.4–466.6 nm with chloroform. The zeta potentials of PVA-stabilized NPs were low and negative (−0.62 mV) while they were comparatively higher and positive for PVP-stabilized NPs (+17.73 mV). Finally, drug-loaded optimal NPs were composed of PLGA (40 mg) and IND (4 mg) in 1 mL DCM/chloroform with PVA/PVP (1–3%), which resulted in sufficient encapsulation (54.94–74.86%) and drug loading (4.99–6.81%). No endothermic peak of PVA/PVP appeared in the optimized formulation, which indicated the amorphous state of IND in the core of the PLGA-NPs. The in vitro release study indicated a sustained release of IND (32.83–52.16%) from the PLGA-NPs till 72 h and primarily followed the Higuchi matrix release kinetics followed by Korsmeyer–Peppas models. The cell proliferation assay clearly established that the organic solvents used to prepare PLGA-NPs had evaporated. The PLGA-NPs did not show any particular toxicity in the HepG2 cells within the dose range of IND (250–500 µg/mL) and at an equivalent concentration of PLGA-NPs (3571.4–7142.7 µg/mL). The cytotoxicity of the hepatotoxic drug (IND) was reduced by its encapsulation into PLGA-NPs. The outcomes of this investigation could be implemented to prepare PLGA-NPs of acceptable properties for the encapsulation of low/high molecular weight drugs. It would be useful for further in vitro and in vivo applications to use this delivery system.

Colorful Luminescent Magnetic Supraparticles: Expanding the Applicability, Information Capacity, and Security of Micrometer-Scaled Identification Taggants by Dual-Spectral Encoding

(Sub)micrometer-scaled identification (ID) taggants enable direct identification of arbitrary goods, thereby opening up application fields based on the possibility of tracking, tracing, and anti-counterfeiting. Due to their small dimensions, these taggants can equip in principle even the smallest subcomponents or raw materials with information. To achieve the demanded applicability, the mostly used optically encoded ID taggants must be further improved. Here, micrometer-scaled supraparticles with spectrally encoded luminescent and magnetically encoded signal characteristics are reported. They are produced in a readily customizable bottom-up fabrication procedure that enables precise adjustment of luminescent and magnetic properties on multiple hierarchy levels. The incorporation of commonly used magnetic nanoparticles and fluorescent dyes, respectively, into polymer nanocomposite particles, establishes a convenient toolbox of magnetic and luminescent building blocks. The subsequent assembly of selected building blocks in the desired ratios into supraparticles grants for all the flexibility to freely adjust both signal characteristics. The obtained spectrally resolved visible luminescent and invisible magnetic ID signatures are complementary in nature, thus expanding applicability and information security compared to recently reported optical- or magnetic-encoded taggants. Additionally, the introduced ID taggant supraparticles can significantly enhance the coding capacity. Therefore, the introduced supraparticles are considered as next-generation ID taggants.

In-Vitro Co-delivery of Decarbazine and Photosense using Poly lactic-co-glycolic acid nanocarrier for combinational therapy

PLGA (Poly lactic-co-glycolic acid) nanoparticles are in new trend for drug delivery due to their good biodegradability properties. In this study, we have synthesized the PLGA nanoparticles by solvent evaporation method and loaded the decarbazine (DTIC, 5-3,3-(dimethyl-ltriazeno)imidazole-4-carboxamide) and photosense (AlPc4) drug alone as well as combined with two different concentrations i-e 25 nM and 250 nM. No cytotoxicity (viability ∼ 100 %) was observed for different treatment arms either alone or in co-delivery of nano-formulation for Rhabdomyosarcoma (RD) cell culture which showed the biocompatibility of carrier. On comparison, the Photodynamic therapy (PDT) alone showed more significant cell death then the combinational therapy (PDT + chemotherapy) at 2 joule /cm² and 5 joule /cm². Lower doses co-delivery showed light dose dependent toxicity to culture i.e., 0 % death @ 2 joule /cm², ∼ 40 % death @ 5 joule /cm². Gene expressions of four apoptosis related genes (CASP3, CASP9, PARP1 and P53) were quantified by RT-PCR which shows down regulation for all the treatment arms indicating the absence of apoptosis for the cell death during PDT and combinational therapy. It was concluded that apoptosis related genes were down-regulated and morphological changes i.e., swelling and disruption suggest that the mode of cell death was necrosis.

Effect of Formulation Variables for the Production of WGA-Grafted, Levodopa-Loaded PLGA Nanoparticles

Levodopa is used for the treatment of Parkinson’s disease (PD) for the last few decades. However, adverse reactions such as dyskinesia, somnolence, nausea, itching, rash, as well as the need for frequent dosing and low bioavailability problems affect the success of the treatment. To prevent side effects caused by conventional therapy, a nanoparticular drug delivery system has been developed, in which receptors are constantly stimulated, and the frequency of dosing is reduced. In this study, levodopa was loaded in Poly lactic-co-glycolic acid (PLGA) nanoparticles (NP) which modified with Wheat Germ Agglutinin (WGA) To increase the effectiveness of levodopa, reduce its side effects and apply to the nasal area which is an alternative way for brain targeting with lower doses. To obtain the optimum levodopa loaded PLGA nanoparticles, the effect of some formulation variables such as polyvinyl alcohol (PVA) concentration, homogenization speed, polymer amount and molecular weight, and levodopa content on the entrapment efficiency (EE) and particle size of the nanoparticles were investigated. Besides these variables, the effect of different parameters on the WGA binding constant was also searched. In addition to in vitro release studies, Differential Scanning Calorimetry (DSC) and Fourier Transform Infrared Spectrophotometer (FT-IR), and Transmission electron microscopy (TEM) analysis were used in the characterization of nanoparticles. Among all formulations, A2 and A8a which was produced with different molcular weights of PLGA, different added levodopa amounts and with different homogenization speeds were chosen as optimum formulations due to their sustained release properties and the ability to release 80 % of their drug content.WGA binding constant was found 78.20 % for A8a-1 and 95 % for A2-1. In this study, we aimed to determine the effect of different formulation parameters on the development of levodopa loaded and WGA grafted PLGA nanoparticles and on the quality characteristics of nanoparticle formulations such as particle size, zeta potential, and EE. In this paper, our results are demonstrated for a better understanding of the effect of process parameters on the development of nanoparticle-based drug delivery systems by using the double-emulsion solvent evaporation technique and on WGA binding of drug-loaded PLGA nanoparticles.

Intratracheally Inhalable Nifedipine-Loaded Chitosan-PLGA Nanocomposites as a Promising Nanoplatform for Lung Targeting: Snowballed Protection via Regulation of TGF-β/β-Catenin Pathway in Bleomycin-Induced Pulmonary Fibrosis

Pulmonary fibrosis is a serious ailment that may progress to lung remodeling and demolition, where the key participants in its incidence are fibroblasts responding to growth factors and cellular calcium swinging. Calcium channel blockers, like nifedipine (NFD), may represent auspicious agents in pulmonary fibrosis treatment. Unfortunately, NFD bears complicated pharmacodynamics and a diminished systemic bioavailability. Thus, the current study aimed to develop a novel, non-invasive nanoplatform for NFD for direct/effective pulmonary targeting via intratracheal instillation. A modified solvent emulsification–evaporation method was adopted for the fabrication of NFD-nanocomposites, integrating poly(D,L-lactide-co-glycolide) (PLGA), chitosan (CTS), and polyvinyl alcohol, and optimized for different physiochemical properties according to the 3² full factorial design. Additionally, the aerodynamic behavior of the nanocomposites was scrutinized through cascade impaction. Moreover, the pharmacokinetic investigations were conducted in rats. Furthermore, the optimum formulation was tested in bleomycin-induced pulmonary fibrosis in rats, wherein fibrotic and oxidative stress parameters were measured. The optimum nanocomposites disclosed a nanosized spherical morphology (226.46 nm), a high entrapment efficiency (61.81%) and a sustained release profile over 24 h (50.4%). As well, it displayed a boosted in vitro lung deposition performance with a mass median aerodynamic diameter of 1.12 µm. Pharmacokinetic studies manifested snowballed bioavailability of the optimal nanocomposites by 3.68- and 2.36-fold compared to both the oral and intratracheal suspensions, respectively. The intratracheal nanocomposites revealed a significant reduction in lung fibrotic and oxidative stress markers notably analogous to normal control besides repairing abnormality in TGF-β/β-catenin pathway. Our results conferred a compelling proof-of-principle that NFD-CTS-PLGA nanocomposites can function as a promising nanoparadigm for pulmonary fibrosis management.

Formulation and evaluation of butenafine loaded PLGA-nanoparticulate laden chitosan nano gel

The present research work is designed to prepare and optimize butenafine (BT) loaded poly lactic co glycolic acid (PLGA) nanoparticles (BT-NPs). BT-NPs were prepared by emulsification probe sonication method using PLGA (A), PVA (B) as polymer and stabilizer, respectively. The optimum composition of BT-NPs was selected based on the point prediction method given by the Box Behnken design software. The optimized composition of BT-NPop showed a particle size of 267.21 ± 3.54 nm with an entrapment efficiency of 72.43 ± 3.11%. The optimum composition of BT-NPop was further converted into gel formulation using chitosan as a natural polymer. The prepared topical gel formulation (BT-NPopG) was further evaluated for gel characterization, drug release, permeation study, irritation, and antifungal studies. The prepared BT-NPopG formulation showed optimum pH, viscosity, spreadability, and drug content. The release and permeation study results revealed slow BT release (42.76 ± 2.87%) with significantly enhanced permeation across the egg membrane. The irritation study data showed negligible irritation with a cumulative score of 0.33. The antifungal study results conclude higher activity than marketed as well as pure BT. The overall conclusion of the results revealed BT-NPopG as an ideal delivery system to treat topical fungal infection.

Why do few drug delivery systems to combat neglected tropical diseases reach the market? An analysis from the technology's stages

INTRODUCTION

Many drugs used to combat schistosomiasis, Chagas disease, and leishmaniasis (SCL) have clinical limitations such as: high toxicity to the liver, kidneys and spleen; reproductive, gastrointestinal, and heart disorders; teratogenicity. In this sense, drug delivery systems (DDSs) have been described in the literature as a viable option for overcoming the limitations of these drugs. An analysis of the level of development (TRL) of patents can help in determine the steps that must be taken for promising technologies to reach the market.

AREAS COVERED

This study aimed to analyze the stage of development of DDSs for the treatment of SCL described in patents. In addition, we try to understand the main reasons why many DDSs do not reach the market. In this study, we examined DDSs for drugs indicated by WHO and treatment of SCL, by performing a search for patents.

EXPERT OPINION

In this present work we provide arguments that support the hypothesis that there is a lack of integration between academia and industry to finance and continue research, especially the development of clinical studies. We cite the translational research consortia as the potential alternative for developing DDSs to combat NTDs.

Formulation design, optimization and in vivo evaluation of oral co-encapsulated resveratrol-humic acid colloidal polymeric nanocarriers

The study aims at formulation and optimization of resveratrol and humic acid co-encapsulated colloidal polymeric nanocarriers to improve stability, oral bioavailability, and antiradical activity of water-insoluble, resveratrol. The eudragit E100 polymeric material was used to fabricate resveratrol and humic acid co-encapsulated oral colloidal polymeric nanocarriers (Res-HA-co-CPNs) using emulsification-diffusion-evaporation method. Taguchi orthogonal array design was employed to check the effect of formulation factors on in vitro physicochemical characteristics. The optimized formulation was further evaluated for oral bioavailability as well as for antiradical potential. Optimized Res-HA-co-CPNs demonstrated spherical and smooth surface including mean particle size, 120.56 ± 18.8 nm; polydispersity index, 0.122; zeta potential, +38.25 mV; and entrapment efficiency, 82.37 ± 1.49%. Solid-state characterization confirmed the amorphous characteristic of optimized Res-HA-co-CPNs. In vitro release profile of Res-HA-co-CPNs showed sustained release behavior up to 48 h and CPNs were found to remain stable at the refrigerated condition for 6 months. In vivo pharmacokinetic studies revealed significant (p < 0.05) improvement of ∼62.76-fold in oral bioavailability. The radical-scavenging activity was found to be increased with time and after 72 h, it was analogous to pure Res. IC₅₀ values were reported to be decreased with time. Henceforth, developed Res-HA-co-CPNs was proven to be a proficient dosage form to increase stability, oral bioavailability, and antiradical activity of resveratrol.HighlightsResveratrol-humic acid co-encapsulated colloidal polymeric nanocarriers (Res-HA-co-CPNs) were fabricated by emulsification-diffusion-evaporation method and optimized by Taguchi orthogonal array design.The Res-HA-co-CPNs revealed favorable mean particle size and percent encapsulation efficiency with a spherical and smooth surface.The Res-HA-co-CPNs showed diffusion-controlled release of Res and were found to be stable at the refrigerated condition for 6 months.The optimized Res-HA-co-CPNs demonstrated significantly (p < 0.05) higher oral bioavailability with respect to pure Res and PM.The optimized Res-HA-co-CPNs demonstrated higher radical-scavenging activity with respect to time.

Pulmonary Delivery of Docetaxel and Celecoxib by PLGA Porous Microparticles for Their Synergistic Effects Against Lung Cancer

BACKGROUND

using a combination of chemotherapeutic agents with novel drug delivery platforms to enhance the anticancer efficacy of the drug and minimizing the side effects, is very imperative for lung cancer treatments.

OBJECTIVE

The aim of the present study was to develop, characterize, and optimize porous poly (D, L-lactic-co-glycolic acid) (PLGA) microparticles for simultaneous delivery of docetaxel (DTX) and celecoxib (CXB) through the pulmonary route for lung cancer.

METHODS

Drug-loaded porous microparticles were prepared by an emulsion solvent evaporation method. The impact of various processing and formulation variables including PLGA amount, dichloromethane volume, homogenization speed, polyvinyl alcohol volume and concentration were assessed on entrapment efficiency, mean release time, particle size, mass median aerodynamic diameter, fine particle fraction and geometric standard deviation using a two-level factorial design. An optimized formulation was prepared and evaluated in terms of size and morphology using a scanning electron microscope.

RESULTS

FTIR, DSC, and XRD analysis confirmed drug entrapment and revealed no drug-polymer chemical interaction. Cytotoxicity of DTX along with CXB against A549 cells was significantly enhanced compared to DTX and CXB alone and the combination of DTX and CXB showed the greatest synergistic effect at a 1/500 ratio.

CONCLUSION

In conclusion, the results of the present study suggest that encapsulation of DTX and CXB in porous PLGA microspheres with desirable features are feasible and their pulmonary co-administration would be a promising strategy for the effective and less toxic treatment of various lung cancers.

Formulation and Evaluation of Resveratrol Loaded Cubosomal Nanoformulation for Topical Delivery

AIM

The aim of the study was to formulate, characterize, and evaluate the Resveratrol- loaded Cubosomes (RC) for topical application.

BACKGROUND

Resveratrol (RV) is a nutraceutical compound with exciting pharmacological potential in different diseases, including cancers. Many studies on resveratrol have been reported for anti- melanoma activity. Due to its low bioavailability, the therapeutic activities of resveratrol are strongly limited. Hence, an approach with nanotechnology has been made to increase its activity through transdermal drug delivery.

OBJECTIVE

To formulate, characterize, and evaluate the resveratrol-loaded cubosomes (RC). To evaluate Resveratrol-loaded Cubosomal Gel (RC-Gel) for its topical application.

METHODS

RC was formulated by homogenization technique and optimized using a 2-factor 3-level factorial design. Formulated RCs were characterized for particle size, zeta potential, and entrapment efficiency. Optimized RC was evaluated for in vitro release and stability study. Optimized RC was further formulated into cubosomal gel (RC-Gel) using carbopol and evaluated for drug permeation and deposition. Furthermore, developed RC-Gel was evaluated for its topical application using skin irritancy, toxicity, and in vivo local bioavailability studies.

RESULTS

The optimized RC indicated cubic-shaped structure with mean particle size, entrapment efficiency, and zeta potential were 113±2.36 nm, 85.07 ± 0.91%, and -27.40 ± 1.40 mV, respectively. In vitro drug release of optimized RC demonstrated biphasic drug release with the diffusion-controlled release of resveratrol (RV) (87.20 ± 3.91%). The RC-Gel demonstrated better drug permeation and deposition in mice skin layers. The composition of RC-Gel has been proved non-irritant to mice skin. In vivo local bioavailability study depicted the good potential of RC-Gel for skin localization.

CONCLUSION

The RC nanoformulation proposes a promising drug delivery system for melanoma treatment simply through topical application.

Encapsulation of a highly hydrophilic drug in polymeric particles: A comparative study of batch and microfluidic processes

The objective of this work was to investigate the effect of microfluidics on the quality attributes of metformin hydrochloride-loaded poly lactic-co-glycolic acid polymeric particles (MFH-PLGA PPs) when compared to a traditional double emulsion batch method. The relationship of encapsulation and loading efficiencies, yield %, particle size, surface morphology, and release profile with process and formulation variables were determined using design of experiments (DoE). The effects of the dispersal method of the primary (sonication vs. vortex) or secondary emulsion (microfluidics vs. batch), polyvinyl alcohol concentration (PVA), and drug to polymer ratio were investigated. The PPs' size was impacted by both the PVA concentration and the type of primary and secondary emulsion dispersion methods. Microfluidics significantly increased the PPs' yield %, particle size, encapsulation, and loading efficiencies. The higher loaded microfluidic-based PPs had more burst release, following first-order release kinetics when compared to the lower loaded batch-based particles, which followed the Korsmeyer-Peppas model for release kinetics. Microfluidic-based PPs exhibited a smooth, porous, more uniform, and larger particle size with hollow structure than the batch-based PPs with a matrix-like structure. In conclusion, we have elucidated the effect of microfluidics on the quality attributes of MFH-PLGA PPs and their comparison to the traditional batch technique.

Particle engineering principles and technologies for pharmaceutical biologics

The global market of pharmaceutical biologics has expanded significantly during the last few decades. Currently, pharmaceutical biologic products constitute an indispensable part of the modern medicines. Most pharmaceutical biologic products are injections either in the forms of solutions or lyophilized powders because of their low oral bioavailability. There are certain pharmaceutical biologic entities formulated into particulate delivery systems for the administration via non-invasive routes or to achieve prolonged pharmaceutical actions to reduce the frequency of injections. It has been well documented that the design of nano- and microparticles via various particle engineering technologies could render pharmaceutical biologics with certain benefits including improved stability, enhanced intracellular uptake, prolonged pharmacological effect, enhanced bioavailability, reduced side effects, and improved patient compliance. Herein, we review the principles of the particle engineering technologies based on bottom-up approach and present the important formulation and process parameters that influence the critical quality attributes with some mathematical models. Subsequently, various nano- and microparticle engineering technologies used to formulate or process pharmaceutical biologic entities are reviewed. Lastly, an array of commercialized products of pharmaceutical biologics accomplished based on various particle engineering technologies are presented and the challenges in the development of particulate delivery systems for pharmaceutical biologics are discussed.

Optimization and Characterization of Brimonidine Tartrate Nanoparticles-loaded In Situ Gel for the Treatment of Glaucoma

Purposes: The present study aimed to develop brimonidine tartrate loaded poly(lactic-co-glycolic acid) acid vitamin E-tocopheryl polyethylene glycol 1000 succinate (BRT-PLGA-TPGS) nanoparticles in thermosensitivein situ gel to improve mucoadhensive properties and drug holding capacity for the better management of glaucoma.Methods: Nanoparticles was optimized by means of Box-Behnken Design (BBD). The formulations were prepared using various concentration of PLGA (0.1-0.4% w/v) and TPGS (0.3-0.5% w/v). The analytical data of fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and transmission electron microscopy (TEM) depicted the drug excipients compatibility and confirmed the nanoparticles. Nanoparticles incorporated gel was evaluated for transcorneal permeability, gelation time, gelling temperature, and rheological studies. In addition, in vitro, transcorneal permeation drug release studies and intraocular pressure (IOP) for optimized gel was also performed. Biocompatibility of formulations was investigated in rabbit model.Results: The drug loaded nanoparticles exhibited 115.72 ± 4.18 nm, 0.190 ± 0.02, -11.80 ± 2.24 mV and 74.85 ± 6.54% of mean size, polydispersity index (PDI), zeta potential and entrapment efficiency (% EE), respectively. As compared to marketed eye drop, the sustained and continuous release BRT release from Poloxamer-based in situ gel was 85.31 ± 3.51% till 24 h. The transcorneal steady-state flux (136.32 μg cm^-2 h^-1) of optimized in situ gel was approximately 3.5 times higher than marketed formulation (38.60 μg cm^-2 h^-1) flux at 4 h. The optimized formulation produces 3 fold greater influences on percentage reduction of IOP (34.46 ± 4.21%) than the marketed formulation (12.24 ± 2.90%) till 8 h.Conclusion: The incorporation of optimized BRT-PLGA-TPGS nanoparticles into a thermosensitivein situ gel matrix to improve precorneal residence time without causing eye irritation and also serve the sustained release of BRT through cornea for effective management of glaucoma.

In Vivo and in Silico Trypanocidal Activity Evaluation of (-)-Cubebin Encapsulated in PLGA Microspheres as Potential Treatment in Acute Phase

In this study, the trypomastigotes of a Y strain of Trypanosoma cruzi were inoculated intraperitoneally into male BALB/c mice weighing approximately 25 g each, which were divided into groups for evaluation of the trypanocidal activity. For the treatment of experimental groups, encapsulated and unencapsulated (-)-cubebin, Benznidazole, and two groups as negative controls were used. The encapsulated (-)-cubebin showed a 68.1 % encapsulation efficiency. The parasitemia peak of substances remained around the 9^th day after the observed reduction in the number of circulating trypomastigotes. The encapsulated (-)-cubebin and (-)-cubebin unloaded showed a decrease of 61.3 % and 58.5 % in the number of parasites as compared to the negative control, respectively. Moreover, animals treated with encapsulated (-)-cubebin had a higher survival time as compared to the other groups. In conclusion, the results obtained were more promising for encapsulated (-)-cubebin as compared to unloaded particles.

Clinical comparative study of optimized metronidazole loaded lipid nanocarrier vaginal emulgel for management of bacterial vaginosis and its recurrence

The main focus of the current work was to design, evaluate and clinically compare the efficiency of novel metronidazole (MTD) loaded solid lipid nanoparticles (SLNs) vaginal emulgel with the marketed vaginal gel (Metron^®) against Bacterial vaginosis (BV). Eight formulations were fabricated using 2³ full factorial design and prepared by stearic acid and tween 80 as solid lipid and surfactant, respectively. Lipid and surfactant concentrations in addition to sonication amplitude were chosen as the independent variables (X₁–X₃). Then, the prepared MTD loaded SLNs were evaluated based on the dependent variables which were particle size, polydispersity index, zeta potential, entrapment efficiency, and cumulative % drug release for 24 h (Y₁–Y₅). The in vitro release study exhibited a sustained release of MTD from the SLNs up to 24 h. The optimal MTD loaded SLNs showed nanosized particles (256 nm) with EE% (52%), and an acceptable ZP value (−29.5 mV). Also, the optimized MTD-SLNs formulation was incorporated into Carbopol emulgel and investigated clinically for its effect against BV. Clinical studies recorded significant enhancement in therapeutic response of MTD from optimized SLNs vaginal emulgel formulation regarding the clinical treatment (p < .05) and low recurrence rate (p < .001) against the marketed product. In conclusion, our findings recommend that the fabricated MTD loaded SLNs vaginal emulgel have significant therapeutic effect in terms of BV management over commercially obtainable marketed vaginal gel (Metron^®).

Enhanced oral bioavailability and gastroprotective effect of ibuprofen through mixed polymer-lipid nanoparticles

Objectives: The aim of this study was to design and formulate mixed polymer-lipid nanoparticles (PLNs) for the delivery of ibuprofen. Methods: The mixed PLNs were prepared by a single modified emulsification solvent evaporation method. Key findings: Core-shell-shaped mixed PLNs were successfully prepared, with sizes in the nano range (193.3 ± 0.70 to 795.8 ± 0.70 nm) and ζ potential (-26.8 ± 0.45 to -42.8 ± 0.30 mV). Entrapment efficiency ranged from 80.3 to 93.6%. Conclusions: Pharmacokinetic parameters showed great improvement in C_max and T_max of ibuprofen from the formulation PLNs8 compared with the respective Brufen^® and pure drugs, indicating improvement in bioavailability of the drug.

Cefaclor Monohydrate-Loaded Colon-Targeted Nanoparticles for Use in COVID-19 Dependent Coinfections and Intestinal Symptoms: Formulation, Characterization, Release Kinetics, and Antimicrobial Activity

Corona virus disease-2019 (COVID-19) emerged in Wuhan, China in December 2019 and was declared as a pandemic by the World Health Organization in March 2020. Although there is no complete treatment protocol for COVID-19, studies on this topic are ongoing, and it is known that broad-spectrum antibiotics such as cephalosporins are used for coinfections and symptoms in COVID-19 patients. Studies have shown that Staphylococcus aureus and Escherichia coli bacteria can cause symptoms such as diarrhea and coinfections accompanying COVID-19. Therefore, in this study, colon-targeted cefaclor monohydrate (CEF)-loaded poly(lactic-co-glycolic acid) (PLGA)-Eudragit S100 nanoparticles (NPs) were prepared using a nanoprecipitation technique. The particle sizes of the CEF-loaded NPs were between 171.4 and 198.8 nm. The encapsulation efficiency was in the range of 58.4%-81.2%. With dissolution studies, it has been concluded that formulations prepared with Eudragit S100 (E-coded) and Eudragit S100+PLGA (EP-coded) are pH-sensitive formulations and they are targetable to the colon, whereas the formulation prepared only with PLGA (P-coded) can release a higher CEF rate in the colon owing to the slow release properties of PLGA. The release kinetics were fitted to the Korsmeyer-Peppas and Weibull models. The antibacterial activity of E-, EP-, and P-coded formulations was 16-fold, 16-fold, and 2-fold higher than CEF, respectively, for S. aureus and E. coli according to the microdilution results. As a result of the time killing experiment, all formulations prepared were found to be more effective than the antibiotic itself for long periods. Consequently, all formulations prepared in this study hope to guide researchers/clinicians in treating both gram-positive and gram-negative bacteria-induced infections, as well as COVID-19 associated coinfections and symptoms.

Garcinol Encapsulated Ph-Sensitive Biodegradable Nanoparticles: A Novel Therapeutic Strategy for the Treatment of Inflammatory Bowel Disease

The emergence of pH-sensitive nanoscale particles is beneficial due to their ability to only release cargo in a colonic pH environment, which helps to directly target inflamed tissues in inflammatory bowel disease (IBD). Hence, we have designed the formulation of pH-sensitive biodegradable garcinol (GAR)-loaded poly (lactic–co–glycolic acid) (PLGA) coated with Eudragit^® S100 (ES100) (GAR-PLGA-ES100 nanoparticles (NPs)) for reducing inflammation caused by proinflammatory cytokines. The GAR-PLGA-ES100 NPs were prepared using a solvent evaporation technique and characterized for shape and surface morphology. An in vitro drug release study revealed the release of the drug specifically from NPs at the colonic pH of 7.4. The in vitro cytotoxicity of the GAR-PLGA-ES100 NPs was also evaluated and found to be highly biocompatible with CACO-2 cells. These NPs were able to reduce lactate dehydrogenase (LDH) and myeloperoxidase (MPO) activity. Inhibition of the expression of pro-inflammatory cytokine TNF-α , chemokine interleukin (IL)-8 and the nuclear factor kappa light chain enhancer of activated B-cells (NF-κB) was observed after GAR-PLGA-ES100 NPs treatment. Therefore, our results support the idea that GAR-PLGA-ES100 NPs show substantial improvement after the release of the drug, specifically in colonic pH targeting and reduction in the activation of inflammation that leads to IBD, suggesting that GAR-PLGA-ES100 NPs are promising candidates for oral delivery to colonic inflamed tissue.

Cubosomes as a Potential Oral Drug Delivery System for Enhancing the Hepatoprotective Effect of Coenzyme Q10

Coenzyme Q10 (CoQ10) acts as an antioxidant that protects the cells by preventing lipid peroxidation. Owing to its low solubility, CoQ10 has shown poor delivery properties and poor bioavailability. The aim of this study is to develop CoQ10 loaded cubosomes in order to enhance its oral delivery and hepatoprotective activity. Cubosomes are cubic nanostructured systems resulting from the colloidal dispersion of cubic liquid crystalline structure in water. CoQ10 loaded cubosomes were prepared using poloxamer 407 and glyceryl monooleate at three weight ratios (1:2.5, 1:5 and 1:7.5) and were further characterized. They were investigated for their hepatoprotective effect in thioacetamide (TAA) induced hepatotoxicity in Wistar rats. The developed CoQ10 cubosomes exhibited moderate to high entrapment efficiency percentages (44.69-75.96%), nanometric dimensions (132.4-223.2 nm), and negatively charged zeta potential values (<-21.3). In-vitro release profiles showed a sustained release of CoQ10 from the developed cubosomes up to 48 h. In-vivo study revealed an improved hepatoprotective effect of CoQ10 cubosomes via reducing liver enzymes, nitric oxide and malondialdehyde as well as elevating phosphoinositide 3-kinase, catalase and glutathione peroxidase, compared to plain drug. These results were in good agreement with histopathological investigations. Consequently, the developed cubosomes showed a potential effect in enhancing the hepatoprotective activity of CoQ10.

Formulation Development of Folic Acid Conjugated PLGA Nanoparticles for Improved Cytotoxicity of Caffeic Acid Phenethyl Ester

BACKGROUND

Honey bee propolis is one of the natural products reported in various traditional systems of medicines, including Ayurveda. Caffeic acid phenethyl ester (CAPE) is an active constituent of propolis which is well known for its anticancer potential. The therapeutic effects of CAPE are restricted owing to its less aqueous solubility and low bioavailability.

OBJECTIVE

In this study CAPE loaded folic acid conjugated nanoparticle system (CLFPN) was investigated to enhance solubility, achieve sustained drug release, and improved cytotoxicity of CAPE Methods: Formulation development, characterization, and optimization were carried out by the design of experiment approach. In vitro and in vivo cytotoxicity study was carried out for optimized formulations.

RESULTS

Developed nanoparticles showed particle size and encapsulation efficiency of 170 ± 2-195 ± 3 nm and 75.66 ± 1.52-78.80 ± 1.25%, respectively. Optimized formulation CLFPN showed sustained drug release over a period of 42 h. GI50 concentration was decreased by 46.09% for formulation compared to CAPE in MCF-7 cells, indicating the targeting effect of CLFPN. An improved in vitro cytotoxic effect was reflected in the in vivo Daltons Ascites Lymphoma model by reducing tumor cell count.

CONCLUSION

The desired nanoparticle characteristic with improved in vivo and in vitro cytotoxicity was shown by the developed formulation. Thus it can be further investigated for biomedical applications.

Propolis nanoparticles modulate the inflammatory and apoptotic pathways in carbon tetrachloride-induced liver fibrosis and nephropathy in rats

This study assessed the use of emulsion-produced propolis nanoparticles for treating carbon tetrachloride (CCl4 )-induced liver fibrosis and nephropathy on albino rat model. The evaluation of hepatotoxicity, nephrotoxicity, and the treatment outcomes involved biochemical investigations of blood samples as well as molecular analysis, and histopathological assessment for liver and kidney tissue samples. CCl4 treatment caused elevated biochemical indicators of hepatotoxic and nephrotoxic effects as detected by liver and kidney functions tests, which improved gradually with propolis nanoparticles treatment. The molecular studies showed an increase in transforming growth factor β (TGF-β), Nephrin, and Caspase-9, while Bcl-2 levels dropped in both liver and kidney tissue samples; such changes were normalized after treatment. The histological findings confirm both biochemical and molecular studies. Our results indicated that propolis nanoparticles had an anti-inflammatory effect as proved by decreased expression of TGF-β in liver tissue and Nephrin in kidney tissue. The propolis nanoparticles showed an anti-apoptotic effect on liver and kidney tissue increasing the expression of Bcl-2 and decreasing the expression of Caspase-9.

Formulation and In Vitro Evaluation of Telmisartan Nanoparticles Prepared by Emulsion-Solvent Evaporation Technique

Objectives

Telmisartan (TLM) is an antihypertensive drug that has been shown to have antiproliferative effects on cancer cells. It has low solubility and suboptimal oral bioavailability. To investigate the potential anticancer effect of TLM on breast cancer cells, poly (D, L-lactide) (PLA) nanoparticles were formulated with the benefit of improving its solubility.

Materials and Methods

TLM-loaded PLA nanoparticles were prepared by emulsion solvent evaporation. The effects of sonication time and polymer:drug ratio on nanoparticle size and drug encapsulation were investigated. TLM-loaded nanoparticles were tested against MCF-7 and MD-AMB-231 breast cancer cell lines for antiproliferative effects.

Results

Nanoparticles with mean particle size 272 nm and 79% encapsulation efficiency were obtained. Sustained release TLM nanoparticles (40% in 24 h) decreased cell viability to 45% for MCF-7 cells at 72 h, even at the lowest TLM concentration, indicating better anticancer efficiency than TLM solution.

Conclusion

TLM nanoparticles could be potential anticancer agents for breast cancer and deserve further studies.

Development, optimization and in vitro evaluation of oxaliplatin loaded nanoparticles in non-small cell lung cancer

BACKGROUND

Platinum-based chemotherapy in non-small cell lung cancer (NSCLC) has been demonstrated as a promising approach by many researchers. However, due to low bioavailability and several side effects, drug targeting to lungs by intravenous administration is not a common route of administration.

OBJECTIVE

In this study, oxaliplatin loaded polycaprolactone (PCL) nanoparticles were prepared to overcome the limitations of the drug. 3³ factorial design was used to evaluate the combined effect of the selected variables on the nanoparticle characteristics and to optimize oxaliplatin loaded PCL nanoparticles.

METHODS

The factorial design was used to study the influence of three different independent variables on the response of nanoparticle particle size, polydispersity index (PDI), zeta potential, and encapsulation efficiency. The cellular uptakes of oxaliplatin loaded nanoparticles with different molecular weights of PCL were evaluated. Moreover, optimized nanoparticles were evaluated for their efficacy in non-small lung cancer using the SK-MES-1 cell line.

RESULTS

In factorial design, it is found that the homogenization speed and surfactant ratio represented the main factors influencing particle size and PDI and did not seem to depend on the PCL ratio. While the cytotoxicity of free oxaliplatin and oxaliplatin loaded nanoparticles were similar in low drug doses (2.5 and 25 μg/mL), the cytotoxicity of oxaliplatin loaded nanoparticles on SK-MES-1 cell was found higher in higher doses (p < 0.05). Moreover, oxaliplatin nanoparticles formulated with different molecular weights of PCL did not show significant differences in cellular uptake in 1 h and 2 h. However, the uptake of PCL₈₀₀₀₀ NPs was found significantly greater than free oxaliplatin at 4 h (p < 0.05).

CONCLUSION

Hence, the development of oxaliplatin loaded PCL nanoparticles can be a useful approach for effective NSCLC therapy. Development, optimization and in vitro evaluation of oxaliplatin loaded nanoparticles in non-small cell lung cancer.

Continuous in-line homogenization process for scale-up production of naltrexone-loaded PLGA microparticles

Injectable, long-acting drug delivery systems provide effective drug concentrations in the blood for up to 6 months. Naltrexone-loaded poly(lactide-co-glycolide) (PLGA) microparticles were prepared using an in-line homogenization method. It allows the transition from a laboratory scale to scale-up production. This research was designed to understand how the processing parameters affect the properties of the microparticles, such as microparticle size distributions, surface and internal morphologies, drug loadings, and drug release kinetics, and thus, to control them. The in-line homogenization system was used at high flow rates for the oil- and water-phases, e.g., 100 mL/min and 400 mL/min, respectively, to continuously generate microparticles. A high molecular weight (148 kDa) PLGA at various concentrations was used to generate oil-phases with a range of viscosities and also to compare with a 64 and 79 kDa at a single, high concentration. The uniformity of the microparticles was found to be related to the viscosity of the oil-phase. As the viscosity of the oil-phase increased from 52.6 mPa∙s to 4046 mPa∙s, the span value (a measure of uniformity) increased from 1.24 to 3.1 for the microparticles generated at the homogenization speed of 2000 RPM. Increasing the PLGA concentration from 5.58% to 16.85% showed a corresponding rise in the encapsulation efficiency from 74.0% to 85.8% and drug loading (DL) from 27.4% to 31.7% for the microparticles made with the homogenization speed of 2000 RPM. These increases may be due to a faster shell formulation, enabling PLGA microparticles to entrap more naltrexone into the structure. A higher DL, however, shortened the drug release duration from 56 to 42 days. The changes in morphology of the microparticles during different phases of the in vitro release study were also studied for three types of microparticles made with different PLGA concentrations and molecular weights. As PLGA microparticles went through structural changes, the surface showed raisin-like wrinkled morphologies within the first 10 days. Then, the microparticles swelled to form smooth surfaces. The in-line approach produced PLGA microparticles with a highly reproducible size distribution, DL, and naltrexone release rate.