Development and evaluation of nitrendipine loaded solid lipid nanoparticles: influence of wax and glyceride lipids on plasma pharmacokinetics

Innovative approaches to Alzheimer's therapy: Harnessing the power of heterocycles, oxidative stress management, and nanomaterial drug delivery system

Alzheimer's disease (AD) presents a complex pathology involving amyloidogenic proteolysis, neuroinflammation, mitochondrial dysfunction, and cholinergic deficits. Oxidative stress exacerbates AD progression through pathways like macromolecular peroxidation, mitochondrial dysfunction, and metal ion redox potential alteration linked to amyloid-beta (Aβ). Despite limited approved medications, heterocyclic compounds have emerged as promising candidates in AD drug discovery. This review highlights recent advancements in synthetic heterocyclic compounds targeting oxidative stress, mitochondrial dysfunction, and neuroinflammation in AD. Additionally, it explores the potential of nanomaterial-based drug delivery systems to overcome challenges in AD treatment. Nanoparticles with heterocyclic scaffolds, like polysorbate 80-coated PLGA and Resveratrol-loaded nano-selenium, show improved brain transport and efficacy. Micellar CAPE and Melatonin-loaded nano-capsules exhibit enhanced antioxidant properties, while a tetra hydroacridine derivative (CHDA) combined with nano-radiogold particles demonstrates promising acetylcholinesterase inhibition without toxicity. This comprehensive review underscores the potential of nanotechnology-driven drug delivery for optimizing the therapeutic outcomes of novel synthetic heterocyclic compounds in AD management. Furthermore, the inclusion of various promising heterocyclic compounds with detailed ADMET (Absorption, Distribution, Metabolism, Excretion, and Toxicity) data provides valuable insights for planning the development of novel drug delivery treatments for AD.

Nanocarrier-based localized and effective treatment of renal disorders: currently employed targeting strategies

Renal disorders pose a global health threat, with targeted drug-delivery systems emerging as a promising strategy to enhance therapy safety and efficacy. Recent efforts have harnessed targeted nanomaterials for kidney disease treatment. While some systems remain in the early stages, they show immense potential in delivering cargo to specific sites. Through animal model experimentations, it has been demonstrated to reduce systemic side effects and enhance treatment effectiveness. This review presents current strategies for kidney disorder treatment, emphasizing site-specific targeting critical to renal disease pathophysiology. Recent advancements in nano-drug delivery systems for kidney targeting are explored. Finally, toxicological aspects and prospects of the most promising kidney-targeting delivery systems are discussed in this review article.

Optimization of the different phases of the freeze-drying process of solid lipid nanoparticles using experimental designs

In this work, the effect of cryoprotectant type and concentration and freeze-drying process parameters were evaluated to determine an optimal freeze-drying process for celecoxib-loaded solid lipid nanoparticles. Different cryoprotectants were tested at different weight ratios (cryoprotectant:lipid). Trehalose, maltose, and sucrose at a 1:1 wt ratio were selected for further use in optimizing the freeze-drying process through experimental designs to accurately define the freezing, primary, and secondary drying conditions of the freeze-drying process. The optimal freeze-dried solid lipid nanoparticles were subjected to a 6-month stability study at either 4 °C or 25 °C/60% RH, resulting in significant growth when the nanoparticles were stored at 25 °C/60% RH. The best results were obtained with trehalose as a cryoprotectant and storage at 4 °C. Furthermore, the in vitro release data showed a significantly different release profile before and after optimization of the freeze-drying process, suggesting that the optimization of the freeze-drying process affected the quality of the freeze-dried cake. In conclusion, a successful lyophilization process was obtained due to rational cooperation between a good formulation and optimal conditions in the freezing and drying steps. This yielded an acceptable non-collapsed freeze-dried cake with good redispersibility, minimal changes in physicochemical properties, and long-term stability at 4 °C.

Nanolipogel Loaded with Tea Tree Oil for the Management of Burn: GC-MS Analysis, In Vitro and In Vivo Evaluation

The GC-MS analysis of tea tree oil (TTO) revealed 38 volatile components with sesquiterpene hydrocarbons (43.56%) and alcohols (41.03%) as major detected classes. TTO efficacy is masked by its hydrophobicity; nanoencapsulation can address this drawback. The results showed that TTO-loaded solid lipid nanoparticles (SLN1), composed of glyceryl monostearate (2% w/w) and Poloxamer188 (5% w/w), was spherical in shape with a core-shell microstructure. TTO-SLN1 showed a high entrapment efficiency (96.26 ± 2.3%), small particle size (235.0 ± 20.4 nm), low polydispersity index (0.31 ± 0.01), and high negative Zeta potential (−32 mV). Moreover, it exhibited a faster active agent release (almost complete within 4 h) compared to other formulated TTO-SLNs as well as the plain oil. TTO-SLN1 was then incorporated into cellulose nanofibers gel, isolated from sugarcane bagasse, to form the ‘TTO-loaded nanolipogel’ which had a shear-thinning behavior. Second-degree thermal injuries were induced in Wistar rats, then the burned skin areas were treated daily for 7 days with the TTO-loaded nanolipogel compared to the unmedicated nanolipogel, the TTO-loaded conventional gel, and the normal saline (control). The measurement of burn contraction proved that TTO-loaded nanolipogel exhibited a significantly accelerated skin healing, this was confirmed by histopathological examination as well as quantitative assessment of inflammatory infiltrate. This study highlighted the success of the proposed nanotechnology approach in improving the efficacy of TTO used for the repair of skin damage induced by burns.

Preparation, Characterization and Pharmacokinetics of Tolfenamic Acid-Loaded Solid Lipid Nanoparticles

The clinical use of nonsteroidal anti-inflammatory drugs is limited by their poor water solubility, unstable absorption, and low bioavailability. Solid lipid nanoparticles (SLNs) exhibit high biocompatibility and the ability to improve the bioavailability of drugs with low water solubility. Therefore, in this study, a tolfenamic acid solid lipid nanoparticle (TA-SLN) suspension was prepared by a hot melt–emulsification ultrasonication method to improve the sustained release and bioavailability of TA. The encapsulation efficiency (EE), loading capacity (LC), particle size, polydispersity index (PDI), and zeta potential of the TA-SLN suspension were 82.50 ± 0.63%, 25.13 ± 0.28%, 492 ± 6.51 nm, 0.309 ± 0.02 and −21.7 ± 0.51 mV, respectively. The TA-SLN suspension was characterized by dynamic light scattering (DLS), fluorescence microscopy (FM), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and Fourier transform infrared (FT-IR) spectroscopy. The TA-SLN suspension showed improved sustained drug release in vitro compared with the commercially available TA injection. After intramuscular administration to pigs (4 mg/kg), the TA-SLN suspension displayed increases in the pharmacokinetic parameters T_max, T_1/2, and MRT_0–∞ by 4.39-, 3.78-, and 3.78-fold, respectively, compared with TA injection, and showed a relative bioavailability of 185.33%. Thus, this prepared solid lipid nanosuspension is a promising new formulation.

Construction of lipid-biomacromolecular compounds for loading and delivery of carotenoids: Preparation methods, structural properties, and absorption-enhancing mechanisms

Due to the unstable chemical properties and poor water solubility of carotenoids, their processing adaptation and oral bioavailability are poor, limiting their application in hydrophilic food systems. Lipid-biomacromolecular compounds can be excellent carriers for carotenoid delivery by taking full advantage of the solubilization of lipids to non-polar nutrients and the water dispersion and gastrointestinal controlled release properties of biomacromolecules. This paper reviewed the research progress of lipid-biomacromolecular compounds as encapsulation and delivery carriers of carotenoids and summarized the material selection and preparation methods for biomacromolecular compounds. By considering the interaction between the two, this paper briefly discussed the effect of these compounds on carotenoid water solubility, stability, and bioavailability, emphasizing their delivery effect on carotenoids. Finally, various challenges and future trends of lipid-biomacromolecular compounds as carotenoid delivery carriers were discussed, providing new insight into efficient loading and delivery of carotenoids.

The influence on the oral bioavailability of solubilized and suspended drug in a lipid nanoparticle formulation: in vitro and in vivo evaluation

The present study investigated the oral bioavailability of celecoxib when incorporated into solid lipid nanoparticles either dissolved or suspended. In vitro drug release in different media, in vivo performance, and in vitro-in vivo correlation were conducted. The results revealed that the compound was successfully encapsulated into the nanocarriers with good physicochemical properties for oral administration. The in vitro release profiles followed the Weibull model, with significant differences between the formulations containing the solubilized and the suspended compound. Furthermore, in vitro release data could be used to rank the observed in vivo bioavailability. The relative bioavailability of celecoxib from the solid lipid nanoparticles was 2.5- and 1.8-fold higher for the drug solubilized and suspended solid lipid nanoparticle formulation, respectively, when compared to the celecoxib reference. A significant difference was observed between the plasma concentration-time profiles and pharmacokinetic parameters for the three investigated formulations. Finally, this investigation displayed promising outcomes that both solubilized and suspended celecoxib in the lipid core of the solid lipid nanoparticles offers the potential to improve the compound's oral bioavailability and thereby reduce the dosing frequency.

Alhumaydhi F, Ashtekar H, D. S S, Adam Conte-Junior C. Development of Microneedle Patch Loaded with Bacopa monnieri Solid Lipid Nanoparticles for the Effective Management of Parkinson's Disease

The demand for drug delivery systems (DDS) to treat Parkinson's disease (PD) is still high, and microneedle (MN) assisted transdermal DDS offers enormous potential. Herbal products for PD have been shown to have antioxidant effects in reducing dopaminergic neurons from degeneration. Here, we attempted to incorporate solid lipid nanoparticles (SLNs) of Bacopa monnieri into dissolvable microneedle arrays and evaluate its neuroprotective activity. The bloodless and painless microneedle arrays through the transdermal route deliver the drug across the blood-brain barrier at the desired concentration. The quality by design (QbD) approach was employed for optimizing the SLNs formulations. The mechanical strength, in vitro release studies, ex-vivo permeation investigation, skin irritation test, histopathological studies, biochemical studies, and behavioural tests SLNs loaded microneedle arrays were performed. The microneedle patches obtained were shown to be mechanically robust and were also found to be nonirritant with a decreased degree of bradykinesia, high motor coordination, and balance ability. Compared to systemic delivery systems, such an MN method can achieve a considerably lower effective dose and allow long-term home-based treatment.

Development of Dapagliflozin Solid Lipid Nanoparticles as a Novel Carrier for Oral Delivery: Statistical Design, Optimization, In-Vitro and In-Vivo Characterization, and Evaluation

Controlling hyperglycemia and avoiding glucose reabsorption are significant goals in type 2 diabetes treatments. Among the numerous modes of medication administration, the oral route is the most common. Introduction: Dapagliflozin is an oral hypoglycemic agent and a powerful, competitive, reversible, highly selective, and orally active human SGLT2 inhibitor. Dapagliflozin-loaded solid lipid nanoparticles (SLNs) are the focus of our present investigation. Controlled-release lipid nanocarriers were formulated by integrating them into lipid nanocarriers. The nanoparticle size and lipid utilized for formulation help to regulate the release of pharmaceuticals over some time. Dapagliflozin-loaded nanoparticles were formulated by hot homogenization followed by ultra-sonication. The morphology and physicochemical properties of dapagliflozin-SLNs have been characterized using various techniques. The optimized dapagliflozin-SLNs have a particle size ranging from 100.13 ± 7.2 to 399.08 ± 2.4 nm with 68.26 ± 0.2 to 94.46 ± 0.7% entrapment efficiency (%EE). Dapagliflozin-SLNs were optimized using a three-factor, three-level Box–Behnken design (BBD). Polymer concentration (X1), surfactant concentration (X2), and stirring duration (X3) were chosen as independent factors, whereas %EE, cumulative drug release (%CDR), and particle size were selected as dependent variables. Interactions between drug substances and polymers were studied using Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). Differential scanning calorimetry (DSC), X-ray diffraction (XRD), and atomic force microscopy (AFM) analysis indicated the crystalline change from the drug to the amorphous crystal. Electron microscope studies revealed that the SLNs’ structure is nearly perfectly round. It is evident from the findings that dapagliflozin-SLNs could lower elevated blood glucose levels to normal in STZ-induced diabetic rats, demonstrating a better hypoglycemic impact on type 2 diabetic patients. The in vivo pharmacokinetic parameters of SLNs exhibited a significant rise in C_max (1258.37 ± 1.21 mcg/mL), AUC (5247.04 mcg/mL), and oral absorption (2-fold) of the drug compared to the marketed formulation in the Sprague Dawley rats.

Design and Development of Solid SMEDDS and Liquisolid Formulations of Lovastatin, for Improved Drug Dissolution and In vivo Effects-a Pharmacokinetic and Pharmacodynamic Assessment

Lovastatin (Lov) is a lipid-lowering agent, with 5% bioavailability (BA) due to extensive first pass metabolism and poor solubility. To enhance dissolution and in vivo effects, Lov solid self microemulsifying drug delivery system (SMEDDS) and liquisolid systems were developed and evaluated to select superior one. Solubilities were determined in oils, surfactants, and cosurfactants. Ternary phase diagrams were constructed and selected the one which showed maximum emulsion zone. In vitro dissolution, DSC, SEM and PXRD studies were used to characterize the developed formulations. In vivo studies were conducted on optimal formulations in wistar rats. Based on solubilities, Capmul PG8 and Capmul MCM were preferred as oils, Labrasol and Transcutol P as surfactant and cosurfactant. Here, Syloid XDP carrier showed better adsorption capacity among others, hence was used in optimal solid SMEDDS (SX) and liquisolid (LS) formulations. Dissolution study results showed significant improvement in release when compared to pure drug. DSC, SEM, and PXRD results indicated the loss of drug crystallinity in optimal formulations. In pharmacokinetic (PK) study, SX and LS showed 2.57 and 1.43 fold improvements in AUC, when compared to that of coarse suspension (CS). In pharmacodynamic (PD) study, hyperlipidemia was induced by Triton X-100. CS and LS treatments showed a decline in hyperlipidemic levels at 4 h. But, SX-treated group showed early onset of decline at 2 h. Further, the duration of anti-hyperlipidemia was at least 12 h extra when compared to CS and LS. This study confirmed the superiority of SX over LS in PK and PD effects.

Recent updates on applications of Lipid-based nanoparticles for site-specific drug delivery

BACKGROUND

Site-specific drug delivery is a widespread and demanding area nowadays. Lipid-based nanoparticulate drug delivery systems have shown promising effects for targeting drugs among lymphatic systems, brain tissues, lungs, and skin. Recently, lipid nanoparticles are used for targeting the brain via the mucosal route for local therapeutic effects. Lipid nanoparticles (LNPs) can help in enhancing the efficacy and lowering the toxicities of anticancer drugs to treat the tumors, particularly in lymph after metastases of tumors. LNPs contain a non-polar core that can improve the absorption of lipophilic drugs into the lymph node and treat tumors. Cellular uptake of drugs can also be enhanced using LNPs and therefore, LNPs are the ideal carrier for treating intracellular infections such as leishmaniasis, tuberculosis and parasitic infection in the brain, etc. Furthermore, specific surface modifications with molecules like mannose, or PEG could improve the macrophage uptake and hence effectively eradicate parasites hiding in macrophages.

METHOD

An electronic literature search was conducted to update the advancements in the field of site-specific drug delivery utilizing lipid-based nanoparticles. A search of the Scopus database (https://www.scopus.com/home.uri) was conducted using the following keywords: lipid-based nanoparticles; site specific delivery.

CONCLUSION

Solid lipid nanoparticles have shown site-specific targeted delivery to various organs including the liver, oral mucosa, brain, epidermis, pulmonary and lymphatic systems. These lipid-based systems showed improved bioavailability as well as reduced side effects. Therefore, the focus of this article is to review the recent research studies on LNPs for site-specific or targeting drug delivery.

Design expert assisted formulation, characterization and optimization of microemulsion based solid lipid nanoparticles of repaglinide

Repaglinide, a member of the meglitinide class of drugs, is a new anti-diabetic agent that is utilized as an oral hypoglycemic agent. Using glyceryl monostearate, cetyl palmitate, and tristearin as lipids and poloxamer 188 as a surfactant, repaglinide-loaded solid lipid nanoparticles were created. Solid lipid nanoparticles were prepared utilizing an o/w microemulsion technique, which included the lipids glyceryl monostearate and tristearin, as well as waxes such as cetyl palmitate and the surfactant poloxamer 188. The mean particle size of the solid lipid nanoparticles formed was around 339 nm, with an entrapment efficiency of 82.20%. In-vitro release studies continued to be conducted using the dialysis bag diffusion technique. Within 12 h, the cumulative drug release was 88.4%. The results indicate that repaglinide was released more slowly from solid lipid nanoparticles made from tristearin and glyceryl monostearate in an equal ratio. Tristearin found the controlled release and extreme entrapment from other lipid carriers like glyceryl monostearate and cetyl palmitate. Differential scanning calorimetry demonstrates that repaglinide is entangled in amorphous or molecular state within solid lipid nanoparticles. SEM microscopy revealed that the produced repaglinide solid lipid nanoparticles had a spherical shape. After one month of storage at 2-8 °C, short-term stability testing revealed no significant alteration.

A pre-formulation study of tetracaine loaded in optimized nanostructured lipid carriers

Tetracaine (TTC) is a local anesthetic broadly used for topical and spinal blockade, despite its systemic toxicity. Encapsulation in nanostructured lipid carriers (NLC) may prolong TTC delivery at the site of injection, reducing such toxicity. This work reports the development of NLC loading 4% TTC. Structural properties and encapsulation efficiency (%EE > 63%) guided the selection of three pre-formulations of different lipid composition, through a 2³ factorial design of experiments (DOE). DLS and TEM analyses revealed average sizes (193-220 nm), polydispersity (< 0.2), zeta potential |- 21.8 to - 30.1 mV| and spherical shape of the nanoparticles, while FTIR-ATR, NTA, DSC, XRD and SANS provided details on their structure and physicochemical stability over time. Interestingly, one optimized pre-formulation (CP-TRANS/TTC) showed phase-separation after 4 months, as predicted by Raman imaging that detected lack of miscibility between its solid (cetyl palmitate) and liquid (Transcutol) lipids. SANS analyses identified lamellar arrangements inside such nanoparticles, the thickness of the lamellae been decreased by TTC. As a result of this combined approach (DOE and biophysical techniques) two optimized pre-formulations were rationally selected, both with great potential as drug delivery systems, extending the release of the anesthetic (> 48 h) and reducing TTC cytotoxicity against Balb/c 3T3 cells.

Improved Bioavailability of Poorly Soluble Drugs through Gastrointestinal Muco-Adhesion of Lipid Nanoparticles

Gastrointestinal absorption remains indispensable in the systemic delivery of most drugs, even though it presents several challenges that, paradoxically, may also provide opportunities that can be exploited to achieve maximal bioavailability. Drug delivery systems made from nanoparticle carriers and especially, lipid carriers, have the potential to traverse gastrointestinal barriers and deploy in the lymphatic pathway, which aptly, is free from first pass via the liver. Several poorly soluble drugs have presented improved systemic bioavailability when couriered in lipid nanoparticle carriers. In this review, we propose an additional frontier to enhancing the bioavailability of poorly soluble drugs when encapsulated in lipid nano-carriers by imparting muco-adhesion to the particles through application of appropriate polymeric coating to the lipid carrier. The combined effect of gastrointestinal muco-adhesion followed by lymphatic absorption is a promising approach to improving systemic bioavailability of poorly soluble drugs following oral administration. Evidence to the potential of this approach is backed-up by recent studies within the review.

An update on oral drug delivery via intestinal lymphatic transport

Orally administered drug entities have to survive the harsh gastrointestinal environment, penetrate the enteric epithelia and circumvent hepatic metabolism before reaching the systemic circulation. Whereas the gastrointestinal stability can be well maintained by taking proper measures, hepatic metabolism presents as a formidable barrier to drugs suffering from first-pass metabolism. The pharmaceutical academia and industries are seeking alternative pathways for drug transport to circumvent problems associated with the portal pathway. Intestinal lymphatic transport is emerging as a promising pathway to this end. In this review, we intend to provide an updated overview on the rationale, strategies, factors and applications involved in intestinal lymphatic transport. There are mainly two pathways for peroral lymphatic transport-the chylomicron and the microfold cell pathways. The underlying mechanisms are being unraveled gradually and nowadays witness increasing research input and applications.

Nanostructured lipid carrier-incorporated gel for efficient topical delivery of fluconazole

Background: Nanostructured lipid carriers (NLCs) of fluconazole were prepared to improve permeability and thereby effective topical drug delivery. Materials and methods: NLCs were prepared and evaluated, and then the optimized NLC suspension was incorporated into a gel that was further evaluated for topical drug delivery. Results and discussion: F-2 NLC formulation was optimized based on results of particle size (161.3 ± 1.385 nm), polydispersity index (0.401), zeta potential (-33 ± 0.46), entrapment efficiency (82.26 ± 0.91%) and in vitro drug release (76.40 ± 0.21%). Ex vivo skin permeation studies showed flux of F-2 gel and the comparison marketed gel as 0.21 and 0.18 mg/cm²/h, respectively. The in vitro antifungal study revealed significantly better activity compared with the marketed gel. Conclusion: Fluconazole NLCs increase drug permeability and proved to be effective in topical drug delivery.

Current Advances in the Use of Nanophytomedicine Therapies for Human Cardiovascular Diseases

Considering the high prevalence of cardiovascular diseases (CVDs), the primary cause of death during the last several decades, it is necessary to develop proper strategies for the prevention and treatment of CVDs. Given the excessive side effects of current therapies, alternative therapeutic approaches like medicinal plants and natural products are preferred. Lower toxicity, chemical diversity, cost-effectiveness, and proven therapeutic potentials make natural products superior compared to other products. Nanoformulation methods improve the solubility, bioavailability, circulation time, surface area-to-volume ratio, systemic adverse side effects, and drug delivery efficiency of these medications. This study intended to review the functionality of the most recent nanoformulated medicinal plants and/or natural products against various cardiovascular conditions such as hypertension, atherosclerosis, thrombosis, and myocardial infarction. Literature review revealed that curcumin, quercetin, and resveratrol were the most applied natural products, respectively. Combination therapy, conjugation, or fabrication of nanoparticles and nanocarriers improved the applications and therapeutic efficacy of herbal- or natural-based nanoformulations. In the context of CVDs prevention and/or treatment, available data suggest that natural-based nanoformulations are considerably efficient, alone or in blend with other herbal/synthetic medicines. However, clinical trials are mandatory to elucidate the safety, cardioprotective effect, and mechanism of actions of nanophytomedicines.

Application of solid lipid nanoparticles as a long-term drug delivery platform for intramuscular and subcutaneous administration: In vitro and in vivo evaluation

The purpose of this work was to evaluate solid lipid nanoparticles (SLNs) as a long acting injectable drug delivery platform for intramuscular and subcutaneous administration. SLNs were developed with a low (unsaturated) and high (supersaturated) drug concentration at equivalent lipid doses. The impact of the drug loading as well as the administration route for the SLNs using two model compounds with different physicochemical properties were explored for their in vitro and in vivo performance. Results revealed that drug concentration had an influence on the particle size and entrapment efficiency of the SLNs and, therefore, indirectly an influence on the C_max/dose and AUC/dose after administration to rats. Furthermore, the in vitro drug release was compound specific, and linked to the affinity of the drug compounds towards the lipid matrix and release medium. The pharmacokinetic parameters resulted in an increased t_max, t_1/2 and mean residence time (MRT) for all formulations after intramuscular and subcutaneous dosing, when compared to intravenous administration. Whereas, the subcutaneous injections performed better for those parameters than the intramuscular injections, because of the higher blood perfusion in the muscles compared with the subcutaneous tissues. In conclusion, SLNs extend drug release, need to be optimized for each drug, and are appropriate carriers for the delivery of drugs that require a short-term sustained release in a timely manner.

Formulation, characterization and statistical optimization of enalapril-loaded lipospheres

Lipid-based polymers have been proved efficient drug carriers for overcoming the insufficiencies of conventional formulations. Ceresin wax was employed to improve permeability, oral bioavailability and patient compliance by preparing enalapril (EP)-loaded lipospheres with a simple solvent evaporation method. A Box–Behnken design with the proposed polynomial equations and quadratic model was applied to investigate and statistically validate the collective influence of formulation variables on lipospheres. Spherical smooth-surfaced lipospheres with an average size of 55 μm with excellent micromeritic properties were produced. Differential scanning calorimetry, X-ray diffraction and Fourier transmission infrared spectroscopy findings proved the lack of any possible interaction between formulation components. The zeta potential ranged from −5 to −20 mV, suggesting the significant stability of lipospheres. Responses such as percentage yield (29–68%), entrapment efficiency (21–53%) and drug release (42–93%) were found to be affected greatly by the concentrations of lipids and the surfactant, and the stirring speed. Reduced and sustained EP release from lipospheres may lower treatment cost and enhance hypertensive patients’ compliance.

Enhancing the Oral Bioavailability of Candesartan Cilexetil Loaded Nanostructured Lipid Carriers: In Vitro Characterization and Absorption in Rats after Oral Administration

Candesartan Cilexetil (CC) is a prodrug widely used in the treatment of hypertension and heart failure, but it has some limitations, such as very poor aqueous solubility, high affinity to P-glycoprotein efflux mechanism, and hepatic first-pass metabolism. Therefore, it has very low oral bioavailability. In this study, glyceryl monostearate (GMS) and Capryol™ 90 were selected as solid and liquid lipids, respectively, to develop CC-NLC (nanostructured lipid carrier). CC was successfully encapsulated into NLP (CC-NLC) to enhance its oral bioavailability. CC-NLC was formulated using a hot homogenization-ultrasonication technique, and the physicochemical properties were characterized. The developed CC-NLC formulation was showed in nanometric size (121.6 ± 6.2 nm) with high encapsulation efficiency (96.23 ± 3.14%). Furthermore, it appeared almost spherical in morphology under a transmission electron microscope. The surgical experiment of the designed CC-NLC for absorption from the gastrointestinal tract revealed that CC-NLC absorption in the stomach was only 15.26% of that in the intestine. Otherwise, cellular uptake study exhibit that CC-NLCs should be internalized through the enterocytes after that transported through the systemic circulation. The pharmacokinetic results indicated that the oral bioavailability of CC was remarkably improved above 2-fold after encapsulation into nanostructured lipid carriers. These results ensured that nanostructured lipid carriers have a highly beneficial effect on improving the oral bioavailability of poorly water-soluble drugs, such as CC.

Nanocarriers for effective nutraceutical delivery to the brain

Neurodegenerative disorders are common among aging populations around the globe. Most are characterized by loss of neurons, protein aggregates, oxidative stress, mitochondrial damage, neuroinflammation among others. Although symptomatic treatment using conventional pharmacotherapy has been widely employed, their therapeutic success is limited due to varied reasons. In the need to identify an alternative approach, researchers successfully demonstrated the therapeutic utility of plant-derived nutraceuticals in cell and animal models of neurodegenerative conditions. However, most nutraceuticals failed during clinical trials in humans owing to their poor bioavailability in vivo and limited permeability across the blood brain barrier (BBB). The current emphasis is therefore on the improved delivery of nutraceuticals to the brain. In this regard, development of nanoparticle conjugated nutraceuticals to enhance bioavailability and therapeutic efficacy in the brain has gained attention. Here, we review the research advances in nanoparticles conjugated nutraceuticals applied in neurodegenerative disorders and discuss their advantages and limitations, clinical trials and toxicity concerns.

Intracellular delivery, accumulation, and discrepancy in antibacterial activity of four enrofloxacin-loaded fatty acid solid lipid nanoparticles

Four fatty acid-solid lipid nanoparticles (SLNs) were formulated and evaluated for intracellular delivery, accumulation, as well as discrepancy in antimicrobial efficacy of their loaded enrofloxacin by using RAW 264.7 cells. The delivery efficacy of enrofloxacin into the macrophages by docosanoic acid SLNs (DAS), octadecanoic acid SLNs (OAS), hexadecanoic acid SLNs (HAS), and tetradecanoic acid SLNs (TAS) were 26.1-29.0, 9.3-10.3, 4.7-5.3 and 4.5-5.0 folds, respectively, compared to free drug when co-incubation for 0.25-4 h. The longer fatty acid prepared nanoparticles loaded enrofloxacin eliminated more slowly and accumulated in the cells for a longer time.The confocal microscopy also demonstrated that higher amount of fatty acid SLNs entered the cells with stronger accumulation performance and less amount SLNs absorbed on the cytomembrane as the carbon chain of fatty acids increased. The bactericidal activity of the four fatty acid SLNs against intracellular Salmonella CVCC541 significantly enhanced compared to the free enrofloxacin. These results revealed that fatty acid SLNs, especially docosanoic acid nanoparticles, might be effective nanocarriers to ferry enrofloxacin or other lipid soluble drugs into cells for intracellular bacterial infection treatment.

Enhanced Oral Bioavailability of Felodipine from Solid Lipid Nanoparticles Prepared Through Effervescent Dispersion Technique

Felodipine (FLD), a dihydropyridine calcium channel blocker with excellent antihypertensive effect, is poorly soluble and undergoes extensive hepatic metabolism, which lead to poor oral bioavailability (about 15%) and limit its clinic application. The goal of this study was to develop solid lipid nanoparticles (SLNs) loading FLD to improve the oral bioavailability. The FLD loaded solid lipid nanoparticles (FLD-SLNs) were prepared by the effervescent dispersion technique developed by our laboratory, which might have some advantages over traditional methods. The FLD-SLNs showed desired particle characteristics with particle size (198.15 ± 1.82 nm), poly dispersity index (0.26 ± 0.02), zeta-potential (- 25.53 ± 0.60 mV), entrapment efficiency (95.65 ± 0.70%), drug loading (2.33 ± 0.10%), and a spherical appearance. Pharmacokinetic results showed that the FLD-SLNs presented 3.17-fold increase in area under the curve (AUC_(0-t)) compared with free FLD after oral administration in beagle dogs, which indicated that SLNs prepared using the effervescent dispersion technique can improve the bioavailability of lipophilic drugs like felodipine by enhancement of absorption and reduction first-pass metabolism.

Promoted Antitumor Activity of Myricetin against Lung Carcinoma Via Nanoencapsulated Phospholipid Complex in Respirable Microparticles

PURPOSE

Myricetin (MYR) flavonoid is well-recognized for its antioxidant, anti-inflammatory and anti-tumor potential. Introducing nanomedicine was the ultimate resort to solve the imperfections of this nutraceutical, namely solubility, stability and delivery issues. The study, thus, aims at developing inhalable microparticles comprising MYR solid lipid nanoparticles (SLNs) for lung cancer therapy.

METHODS

A two-step preparation procedure starting with complexation of MYR with the phospholipid Lipoid-S100, followed by nanoencapsulation in Gelucire-based, surfactant-free SLNs was developed. SLNs were characterized in terms of physicochemical properties, MYR loading, release behavior as well as anti-tumor potential and cellular uptake. Respirable microparticles were then obtained by spray drying SLNs with carbohydrate carriers. Their size, flowability and pulmonary deposition pattern were assessed.

RESULTS

Optimized SLNs were 75.98 nm in diameter with a zeta-potential of -22.5 mV, and an encapsulation efficiency of 84.5%. Attempts to ameliorate drug loading implicate MYR-phospholipid complexation (MYR-PH-CPX) prior to its entrapment in SLNs, which ensured 5-fold increase in drug loading. Viability assays were modified to guarantee MYR chemical stability. Superior antitumor activity of MYR-phospholipid-complex and 3-fold reduction in IC₅₀ were accomplished with MYR-SLNs. This could be related to enhanced cellular uptake revealed by confocal imaging and doubled fluorescence intensity. SLNs entrapping MYR-PH-CPX were spray-dried with carbohydrate carriers to produce respirable microparticles. The latter ensured MMAD of 2.39 μm and span index of 1.84, in addition to good flowability and > 80% release over 8 h. Deposition experiments revealed MMAD of 2.77 μm, FPF of 81.23 and EF of 93% indicating particle deposition in the targeted bronchial region.

CONCLUSIONS

The study highlights the ability of phospholipid-complex on the nanoencapsulation, cellular uptake and antitumor activity of MYR. Formulation of respirable microparticles gives promises of efficacious therapy of lung carcinoma.

Improving the Oral Bioavailability of an Anti-Glioma Prodrug CAT3 Using Novel Solid Lipid Nanoparticles Containing Oleic Acid-CAT3 Conjugates

13a-(S)-3-pivaloyloxyl-6,7-dimethoxyphenanthro(9,10-b)-indolizidine (CAT3) is a novel oral anti-glioma pro-drug with a potent anti-tumor effect against temozolomide-resistant glioma in vivo. However, poor lipid solubility has limited the encapsulation efficacy during formulation development. Moreover, although the active metabolite of CAT3, 13a(S)-3-hydroxyl-6,7-dimethoxyphenanthro(9,10-b)-indolizidine (PF403), can penetrate the blood-brain barrier and approach the brain tissue with a 1000-fold higher anti-glioma activity than CAT3 in vitro, its bioavailability and Cmax were considerably low in plasma, limiting the anti-tumor efficacy. In this study, a novel oleic acid-CAT3 conjugate (OA-CAT3) was synthesized at the first time to increase the lipid solubility of CAT3. The OA-CAT3 loaded solid lipid nanoparticles (OA-CAT3-SLN) were constructed using an ultrasonic technique to enhance the bioavailability and Cmax of PF403 in plasma. Our results demonstrated that CAT3 was amorphous in the lipid core of OA-CAT3-SLN and the in vitro release was well controlled. Furthermore, the encapsulation efficacy and the zeta potential increased to 80.65 ± 6.79% and -26.7 ± 0.46 mV, respectively, compared to the normal CAT3 loaded SLN. As indicated by the high-performance liquid chromatography-mass spectrometry (HPLC-MS/MS) quantitation, the monolayer cellular transepithelial transport rate of OA-CAT3-SLN improved by 2.42-fold relied on cholesterol compared to the CAT3 suspension. Hence, the in vitro cell viability of OA-CAT3-SLN in C6 glioma cells decreased to 29.77% ± 2.13% and 10.75% ± 3.12% at 48 and 72 h, respectively. Finally, compared to the CAT3 suspension, the in vivo pharmacokinetics in rats indicated that the plasma bioavailability and Cmax of PF403 as afforded by OA-CAT3-SLN increased by 1.7- and 5.5-fold, respectively. Overall, the results indicate that OA-CAT3-SLN could be an efficacious delivery system in the treatment of glioma.

Preparation, optimization, and in-vitro characterization of α-tocopherol-loaded solid lipid nanoparticles (SLNs)

Objective: The main scope of present investigation was preparation and physicochemical characterization of solid lipid nanoparticles (SLNs) loaded by α-tocopherol acetate (ATA).Methods: ATA-loaded nanoparticles were prepared by solvent injection-homogenization technique using stearic acid as the solid lipid, phosphatidylcholine as the stabilizer and finally coated by chitosan with the aim of increasing z-potential and also having a more stable nano-formulation. Then, characterization of SLNs has been conducted using dynamic light scattering (DLS), zeta potential measurement, Fourier transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC).Results: Nanoparticles with average sizes of 175 ± 15 nm and zeta potential of +35 ± 2.5 mV were obtained. An excellent drug entrapment efficiency of 90.58 ± 1.38% was obtained with a no-burst slow release up to about 10 days tested. The final plateau of release of ATA from nanoparticulate system within 216 h was 61.13 ± 0.13% which was approached in about 150 h. Physical stability studies showed that the ATA nano-formulation remained stable with slight increase in mean particle size and polydispersity index over a 3-month period in refrigerated temperature. Considering both FTIR and DSC analysis, it can be concluded that there is no new band formation between materials and ATA in our nano-formulation. Particle sizes obtained using AFM images are in a good agreement to those established from the DLS analysis.Conclusion: These data showed a promising delivery system for vitamin E based on SLN platform.

Micro and nanoscale technologies in oral drug delivery

Oral administration is a pillar of the pharmaceutical industry and yet it remains challenging to administer hydrophilic therapeutics by the oral route. Smart and controlled oral drug delivery could bypass the physiological barriers that limit the oral delivery of these therapeutics. Micro- and nanoscale technologies, with an unprecedented ability to create, control, and measure micro- or nanoenvironments, have found tremendous applications in biology and medicine. In particular, significant advances have been made in using these technologies for oral drug delivery. In this review, we briefly describe biological barriers to oral drug delivery and micro and nanoscale fabrication technologies. Micro and nanoscale drug carriers fabricated using these technologies, including bioadhesives, microparticles, micropatches, and nanoparticles, are described. Other applications of micro and nanoscale technologies are discussed, including fabrication of devices and tissue engineering models to precisely control or assess oral drug delivery in vivo and in vitro, respectively. Strategies to advance translation of micro and nanotechnologies into clinical trials for oral drug delivery are mentioned. Finally, challenges and future prospects on further integration of micro and nanoscale technologies with oral drug delivery systems are highlighted.

Nanostructured lipid carriers for oral delivery of silymarin: Improving its absorption and in vivo efficacy in type 2 diabetes and metabolic syndrome model

Silymarin (SLM) is a mixture of flavonolignans extracted from the fruit of Silybum marianum L. Gaertn. which has been used for decades as a hepatoprotector. Silymarin has recently been proposed to be beneficial in type 2 diabetic patients. Constituents of SLM are poorly water-soluble and low permeable compounds, with consequently limited oral bioavailability. This study aimed to investigate the possibility of delivery of SLM via nanostructured lipid carriers (NLCs) to overcome these issues and for preparation of an oral dosage form. NLCs were prepared through an emulsion/evaporation/solidifying method. Cetyl palmitate:Lauroglycol 90 was selected as the lipid mixture and Brij S20 as surfactant. NLCs were chemically and physically characterized. Encapsulation efficiency was more than 92%. The storage stability of the NLC suspension was also investigated and the freeze-drying process was taken into consideration. After assessing the stability of the formulation in a simulated gastrointestinal environment, the release of SLM was monitored in different pH conditions. In vitro experiments with artificial membranes (PAMPA) and Caco-2 cells revealed that the NLCs enhanced the permeation of SLM. Active processes are involved in the internalization of NLCs, as evidenced by cellular uptake studies. After preliminary toxicological studies, the formulation was studied in vivo in a streptozotocin (STZ)-induced diabetic mouse model in the presence of metabolic syndrome. The formulation was also compared to an NLC containing stearic acid:Capryol 90, to evaluate the effect of the lipid matrix on the in vivo performance of nanocarriers. Finally, hepatic histopathological analyses were also conducted. Both SLM-loaded NLCs exhibited in vivo a significant down-regulation of blood glucose and triglyceride levels better than free SLM, with a liver-protective effect. Furthermore, both formulations showed a significant anti-hyperalgesic effect on STZ-induced neuropathy.

Preparation and Characterization of Solid Lipid Nanoparticles-Based Gel for Topical Delivery

Solid lipid nanoparticles (SLNs) have been extensively investigated for effective delivery of both hydrophilic and lipophilic drugs by topical route. There are several scalable techniques for the preparation of SLNs such as homogenization, microemulsion template, and solvent emulsification diffusion. This chapter describes step-wise methodology for the preparation and characterization of SLNs using solvent emulsification diffusion method. Tretinoin, a lipophilic entity, was chosen as a model drug. The critical aspects and the important interpretations with respect to the preparation and characterization of SLNs are reported in "Notes" section.

Nanoparticle Based Treatment for Cardiovascular Diseases

Nanotechnology has gained increased attention for delivering therapeutic agents effectively to the cardiovascular system. Heart targeted nanocarrier based drug delivery is a new, effective and efficacious approach for treating various cardiac related disorders such as atherosclerosis, hypertension, and myocardial infarction. Nanocarrier based drug delivery system circumvents the problems associated with conventional drug delivery systems, including their nonspecificity, severe side effects and damage to the normal cells. Modification of physicochemical properties of nanocarriers such as size, shape and surface modifications can immensely alter its invivo pharmacokinetic and pharmacodynamic data and will provide better treatment strategy. Several nanocarriers such as lipid, phospholipid nanoparticles have been developed for delivering drugs to the target sites within the heart. This review summarizes and increases the understanding of the advanced nanosized drug delivery systems for treating cardiovascular disorders with the promising use of nanotechnology.

Development and evaluation of isradipine via rutin-loaded coated solid-lipid nanoparticles

The objective was to develop a stable and non-compliance coated solid-lipid nanoparticles (coated SLN) using polymer (Eudragit L100) and lipoid (glycerol monostearate: soya lecithin) for partial dose reduction of isradipine [ISR; 2.5 mg by combination of bioenhancing agent (rutin; Ru) in equivalent ratio]. The physicochemical characterizations were performed by FT-IR and DSC of elected model drug (ISR), drug mixer with Ru/polymer and coated SLN with Ru (ONbp); the resulted distinctive peaks demonstrated that no chemical interaction and incompatibility found between them. The plasma samples of formulation (ONbp) were analyzed by liquid chromatography (HPLC) using UV-spectrometer. Data were integrated and analyzed with the help of a computer-designed program "Kinetica Software" (Thermo Scientific Kinetica, PK/PD Analysis, version 5.0, Philadelphia, PA). The pharmacokinetic study showed 3.2- to 4.7-folds enhancement in oral bioavailability of coated SLN of ISR with Ru (ONbp) when compared to a coated formulation of ISR without Ru (ONps) and conventional drug suspension. In vivo studies were revealed significantly at greater extent in (drug stability and solubility) oral absorption, which has shown potential entrapment efficiency (97.85% ± 1.02%) to improve biological activity against hypertension. Hence, nano-system of ISR against hypertension is achieved with consequent dose reduction with enhanced systemic bioavailability.

Intranasal Surface-Modified Mosapride Citrate-Loaded Nanostructured Lipid Carriers (MOS-SMNLCs) for Treatment of Reflux Diseases: In vitro Optimization, Pharmacodynamics, and Pharmacokinetic Studies

Gastroesophageal reflux disease (GERD) is an esophageal injury occurred when the stomach contents reflux abnormally into the esophagus. GERD complications include esophageal adenocarcinoma. Mosapride (MOS) is a safe prokinetic agent potentially used to treat GERD. Yet, its low solubility and bioavailability due to extensive first-pass metabolism limits its applications. This study aimed to formulate MOS nanostructured lipid carriers (MOS-NLCs) via the intranasal route to improve its bioavailability. Melt-emulsification low temperature-solidification technique using 2³ full factorial design was adopted to formulate MOS-NLCs. Eight formulae were prepared and assessed in terms of entrapment efficiency (%EE), particle size, and in vitro release. Glycerol addition significantly reduced the particle sizes and improved %EE and %drug released. Surface modification using chitosan was applied. The optimized MOS surface-modified nanostructured lipid carriers (MOS-SMNLCs-F7)(stearic acid, 4% glycerol, 0.5% LuterolF127, 0.5% chitosan) showed low particle size 413.8 nm ± 11.46 nm and high %EE 90.19% ± 0.06% and a threefold increase in permeation of MOS with respect to the drug suspension. MOS-SMNLCs (F7) was also evaluated for its bioavailability compared with drug suspension and commercial product. Statistical analysis revealed a significant increase in gastric emptying rate to be 21.54 ± 1.88 contractions/min compared with10.02 ± 0.62 contractions/min and 8.9 ± 0.72 contractions/min for drug suspension and oral marketed product respectively. Pharmacokinetic studies showed 2.44-fold rise in bioavailability as compared to MOS suspension and 4.54-fold as compared to the oral marketed product. In vitro/in vivo studies proven to level A correlation between in vitro permeation through sheep nasal mucosa and in vivo absorption. Therefore, MOS-SMNLCs could be considered a step forward towards enhancing the clinical efficacy of Mosapride.

Enhancement of In Vivo Efficacy and Oral Bioavailability of Aripiprazole with Solid Lipid Nanoparticles

Aripiprazole (ARP), a second-generation or atypical antipsychotic, is poorly soluble and undergoes extensive hepatic metabolism and P-glycoprotein efflux which lead to reduced in vivo efficacy and increased dose-related side effects. To enhance in vivo efficacy and oral bioavailability of aripiprazole, aripiprazole-loaded solid lipid nanoparticles (SLNs) were developed using tristearin as solid lipid. Tween 80 and sodium taurocholate were used as surfactants to prepare SLNs using microemulsification method. SLNs were characterized for particle size, zeta potential, entrapment efficiency, and crystallinity of lipid and drug. In vitro release studies were performed in water containing 0.5% sodium dodecyl sulfate. Pharmacodynamic evaluation was carried out in laca mice using dizocilpine-induced schizophrenic model where behavioral evaluation revealed better in vivo efficacy of SLNs. Pharmacokinetics of aripiprazole-loaded SLNs after oral administration to conscious male Wistar rats was studied. Bioavailability of aripiprazole was increased 1.6-fold after formulation of aripiprazole into SLNs as compared to plain drug suspension. The results indicated that solid lipid nanoparticles can improve the bioavailability of lipophilic drugs like aripiprazole by enhancement of absorption and minimizing first-pass metabolism.

Encapsulation challenges, the substantial issue in solid lipid nanoparticles characterization

Solid lipid nanoparticles (SLNs), as alternative colloidal carriers, have been used for the sustained release of lipophilic drugs with poor water solubility. One of the most important parameters in the characterization of SLNs is entrapment efficiency (EE). Despite the importance of this factor in estimating the drug loading capacity, EE does not always represent the exact percentage of the entrapped drug. Several variables such as the stirring speed and duration, and concentration of surfactant, emulsifier, and drug play important roles in determining the final EE. In addition, EE is mainly affected by the type and concentration of the lipid. There are two major methods for the measurement of EE are in which the encapsulated drug in SLNs is either directly measured (direct method) or the amount of unencapsulated drug in the supernatant is measured (indirect method). Accuracy of drug analysis is the main challenge for EE calculation, and is either performed in the separated aqueous medium or the particles. In this review, we aimed to introduce the available methods for EE determination in SLNs and discuss the advantages and shortcomings of each method.

Nanocarriers as treatment modalities for hypertension

Hypertension, a worldwide epidemic at present, is not a disease in itself rather it is an important risk factor for serious cardiovascular disorders including myocardial infarction, stroke, heart failure, and peripheral artery disease. Though numerous drugs acting via different mechanism of action are available in the market as conventional formulations for the treatment of hypertension but they face substantial challenges regarding their bioavailability, dosing and associated adverse effects which greatly limit their therapeutic efficacies. Various studies have demonstrated that nanocarriers can significantly increase the drug bioavailability thereby reducing the frequency of dosing in addition to minimizing toxicity associated with high dose of the drug. The present review provides an insight into the challenges associated with the conventional antihypertensive formulations and need for oral nanoparticulate systems in order to overcome problems associated with conventional formulations. Hypertension has circadian pattern of blood pressure, therefore chronotherapeutics can play a decisive role for the treatment, and however, nanoparticulate system can play major role in hypertension management. Future prospective for particulate nanocarriers in drug delivery for hypertension includes chronotherapeutics and emerging technique like gene therapy which is also covered in the review.

Topical phenytoin nanostructured lipid carriers: design and development

Phenytoin (PHT) is an antiepileptic drug that was reported to exhibit high wound healing activity. Nevertheless, its limited solubility, bioavailability, and inefficient distribution during topical administration limit its use. Therefore, this study aims to develop, characterize nanostructured lipid carriers (NLCs), and evaluate their potential in topical delivery of PHT to improve the drug entrapment efficiency and sustained release. The NLCs were prepared by hot homogenization followed by ultra sonication method using 2³ factorial design. NLC formulations were characterized regarding their particle size (PS), zeta potential (ZP), entrapment efficiency percent (%EE), surface morphology, physicochemical stability, and in vitro release studies. The optimized NLC (F7) was further incorporated in 1%w/v carbopol gel and then characterized for appearance, pH, viscosity, stability, and in vitro drug release. The prepared NLCs were spherical in shape and possessed an average PS of 121.4-258.2 nm, ZP of (-15.4)-(-32.2) mV, and 55.24-88.80 %EE. Solid-state characterization revealed that the drug is dispersed in an amorphous state with hydrogen bond interaction between the drug and the NLC components. NLC formulations were found to be stable at 25 °C for six months. The stored F7-hydrogel showed insignificant changes in viscosity and drug content (p>.05) up to six months at 25 °C that pave a way for industrial fabrication of efficient PHT products. In vitro release studies showed a sustained release from NLC up to 48 h at pH 7.4 following non-Fickian Higuchi kinetics model. These promising findings encourage the potential use of phenytoin loaded lipid nanoparticles for future topical application.

Solubility and Thermodynamic Analysis of Antihypertensive Agent Nitrendipine in Different Pure Solvents at the Temperature Range of 298.15 to 318.15°K

The aim of the present study was to ascertain the solubility of nitrendipine (NP), an antihypertensive drug in six different pure solvents such as water, ethyl acetate (EA), ethanol, isopropyl alcohol (IPA), polyethylene glycol-400 (PEG-400), and Transcutol at temperature from 298.15 to 318.15 K under atmospheric pressure (p) of 0.1 MPa. Experimental solubility data of NP was fitted with Apelblat and ideal models. The mole fraction solubility of NP was found maximum in PEG-400 (6.85 × 10^-2 at 318.15 K) followed by Transcutol (4.65 × 10^-2 at 318.15 K), EA (1.68 × 10^-2 at 318.15 K), ethanol (2.83 × 10^-3 at 318.15 K), IPA (2.69 × 10^-3 at 318.15 K), and water (1.29 × 10^-7 at 318.15 K). The dissolution activity of NP was observed as an endothermic, spontaneous, and an entropy-driven in most of studied pure solvents. The solubility data of NP obtained in the present study could be useful in purification, recrystallization, and dosage forms design of NP.