Evaluation of pharmacokinetic properties and anaesthetic effects of propofol in a new perfluorohexyloctane (F6H8) emulsion in rats--A comparative study

Semifluorinated Alkanes as New Drug Carriers-An Overview of Potential Medical and Clinical Applications

Fluorinated compounds have been used in clinical and biomedical applications for years. The newer class of semifluorinated alkanes (SFAs) has very interesting physicochemical properties including high gas solubility (e.g., for oxygen) and low surface tensions, such as the well-known perfluorocarbons (PFC). Due to their high propensity to assemble to interfaces, they can be used to formulate a variety of multiphase colloidal systems, including direct and reverse fluorocarbon emulsions, microbubbles and nanoemulsions, gels, dispersions, suspensions and aerosols. In addition, SFAs can dissolve lipophilic drugs and thus be used as new drug carriers or in new formulations. In vitreoretinal surgery and as eye drops, SFAs have become part of daily clinical practice. This review provides brief background information on the fluorinated compounds used in medicine and discusses the physicochemical properties and biocompatibility of SFAs. The clinically established use in vitreoretinal surgery and new developments in drug delivery as eye drops are described. The potential clinical applications for oxygen transport by SFAs as pure fluids into the lungs or as intravenous applications of SFA emulsions are presented. Finally, aspects of drug delivery with SFAs as topical, oral, intravenous (systemic) and pulmonary applications as well as protein delivery are covered. This manuscript provides an overview of the (potential) medical applications of semifluorinated alkanes. The databases of PubMed and Medline were searched until January 2023.

Drug Product Characterization of High Concentration Non-Aqueous Protein Powder Suspensions

High concentration protein formulations for subcutaneous injection represent a substantial number of development projects in the pharmaceutical industry. Such concentrated aqueous protein solutions face some specific challenges such as increased viscosity and aggregation propensity. Protein powder suspensions in non-aqueous vehicles could be an alternative providing lower viscosity than the respective aqueous solution. The choice of potential suspension vehicles is limited as traditional non-aqueous liquids, such as oils, show an inherent high viscosity. We studied suspensions prepared by dispersing spray-dried protein powder in different vehicles including sesame oil and medium chain triglycerides, as well as fluorinated and semifluorinated alkanes. We found, that semifluorinated alkanes enable formulations with high concentrations up to 280 mg/ml monoclonal antibody with a low viscosity of less than 10 mPa·s and low injection forces. The glide force of suspensions containing 210 mg/ml protein was not affected by the particle size of the spray-dried powders with medians ranging from 1 to 14 µm. In contrast, suspensions prepared with cryo-milled powder showed markedly higher viscosities and were not injectable at the same concentration. Protein powder suspensions were syringeable using a 25G needle. Vial filling using a peristaltic pump was possible and lead to a uniform filling. Sedimentation of the suspension was slow and does not lead to challenges upon vial filling during manufacturing or transfer of the suspension into syringes. Thus, we could show that dispersions of spray-dried protein powders in non-aqueous vehicles, such as semifluorinated alkanes, are a promising alternative to aqueous protein solutions at high concentrations.

Intravitreal Application: Physicochemical Properties of Drugs Dissolved in Silicone Oils of Different Density in Comparison to the Porcine Vitreous Body

Silicone oil endotamponades provide a reservoir for drugs in the eye. Following vitrectomy surgery to treat retinal detachments, extensive diabetic retinopathy or endophthalmitis, they can be used as long-term lipophilic depots. This study aimed to investigate the physicochemical properties of intravitreally applied drugs of different lipophilicity, namely vancomycin, ceftazidime and voriconazole. For this purpose, an in vitro model of the silicone-oil-filled eye compared to porcine vitreous bodies (PVBs) was used. In a glass container, either light or heavy silicone oil or PVB was set into equilibrium with an aqueous fluid. Vancomycin, voriconazole and ceftazidime were added in concentrations commonly applied in clinical practice. The time course of the concentration of the drugs was determined in the hydrophilic phase for up to 24 h. With silicone oil present, the concentrations of vancomycin, voriconazole and ceftazidime were elevated in the aqueous humor when compared to the vitreous body (p < 0.001 for all drugs). With increasing lipophilicity, higher concentrations of the drug dissolved in silicone oil after 24 h (52.7%, 49.1% and 34.3% for vancomycin, ceftazidime and voriconazole, respectively). While no difference between lighter- and heavier-than-water silicone oil was apparent for vancomycin and ceftazidime (p = 0.17 and p = 0.72), voriconazole dissolved significantly better in the heavier-than-water silicone oil (p = 0.002). A higher-than-expected percentage of the glycopeptide vancomycin dissolved in the porcine vitreous body, possibly due to protein binding. In conclusion, silicone oils influence the drug concentration and distribution of intravitreally applied drugs depending on their lipophilicity. The addition of F6H8 used to create heavy silicone oils attenuates these effects for lipophilic drugs. Knowledge of the distribution of these intravitreally applied drugs is crucial to ensure the desired anti-infectious effect.

Powder suspensions in non-aqueous vehicles for delivery of therapeutic proteins

Formulating biopharmaceuticals is a challenging task due to their complex and sensitive nature. Protein drugs are typically marketed either as an aqueous solution or as a lyophilizate. Usually aqueous solutions are preferred as neither drying nor reconstitution are required. But it may be unfeasible if the protein features low stability. An interesting alternative to avoid at least reconstitution are protein powder suspensions in non-aqueous vehicles. Such formulations combine the ready-to-use approach with the high protein stability in the solid state. Additionally, protein powder suspensions offer a potentially lower viscosity compared to aqueous solutions at high protein concentrations. Besides injection, other application routes might also benefit from the protein powder approach such as topical or inhalational delivery. Protein powders, which can be dispersed in the non-aqueous suspension vehicle, are usually prepared by spray-drying or freeze-drying with an additional milling step, but other techniques have also been described in literature. An ideal powder preparation technique results in minimum protein damage and yields particle sizes in the lower micrometre range and homogeneous particle size distribution enabling subcutaneous or intramuscular injection through hypodermic needles. As suspension vehicles traditional non-aqueous injectable liquids, such as plant oils, may be selected. But they show an inherent high viscosity, which can lead to unacceptable glide forces during injection. Furthermore, the vehicle should provide high product stability with respect to protein integrity and suspension resuspendability. This review will describe how proteins can be formulated as protein powder suspensions in non-aqueous vehicles for subcutaneous injection including potential vehicles, protein powder preparation techniques, protein and suspension physical stability, as well as the use in the field of high concentration protein formulations.

Effective management of acute postoperative pain using intravenous emulsions of novel ketorolac prodrugs: in vitro and in vivo evaluations

The aim was to prepare intravenous fat emulsions (IFEs) of ketorolac (KTL) ester prodrugs and to investigate the pharmacokinetics and pharmacodynamics of these formulations. Three prodrugs of KTL (KTL-IS, KTL-AX and KTL-BT) were synthesized as a means to increase the lipid solubility of KTL. All KTL prodrugs with higher Log P values presented increased tendency to partition into a blank IFE using extemporaneous addition method - the encapsulation efficiency of KTL-IS IFE and KTL-BT IFE was more than 97%. The particle sizes and zeta potentials of these two formulations were comparable to that of the blank IFE. PK studies in rabbits showed significant larger AUC0-8h (646.969 ± 154.326 mg/L•h-1 for KTL-IS IFE and 559.426 ± 103.057 mg/L•h-1 for KTL-BT IFE) than that of ketorolac tromethamine (KTL-T) injectable (286.968 ± 63.045 mg/L•h-1) and approximately 2-fold increases in the elimination t1/2 over KTL-T. In a rat postoperative pain model, the paw withdrawal thresholds and the paw withdrawal latency after I.V. KTL prodrug IFEs were significantly higher than that after I.V. KTL-T at 3~4 h. Effective controlling of acute postoperative pain in a longer duration can be achieved by using non-addictive ketorolac derivatives intraveneous emulsions.

Impact of different emulsifiers on biocompatibility and inflammatory potential of Perfluorohexyloctane (F6H8) emulsions for new intravenous drug delivery systems

Background

Emulsions on the basis of Perfluorohexyloctane (F6H8), a semifluorinated alkane (SFA), have shown to dissolve and transport highly lipophilic compounds. It is unknown how F6H8-containing emulsions (F6H8-cEM) interact with compartment blood, the reticuloendothelial system (RES), or influence injured organs in vivo. The current study was conducted to investigate the in vitro biocompatibility of F6H8-cEM and their drug delivery properties. Afterward, an in vivo study was performed as a proof-of-concept study in a rat model of acute kidney injury (AKI), which focused on the potential influence of F6H8-cEM on inflammation in an injured organ.

Methods

Two different F6H8-cEM were stabilized by the emulsifying agents Poloxamer 188 (Pluronic^® F68) or lecithin (S75). The two resulting emulsions F6H8-Pluronic or F6H8-lecithin were tested in vitro for the potential modulation of acute inflammation via whole blood assay, FACS, and ELISA. Antioxidant capacity and drug delivery properties were measured with an oxidation assay. Secondly, AKI was induced in the rats, which were treated with the F6H8-lecithin emulsion. Renal function and inflammation were assessed.

Results

Both F6H8-cEM were phagocytized by monocytes and both dose-dependently affected apoptosis (Annexin V binding) in monocytes. TNF-α expression increased dose-dependency for F6H8-Pluronic emulsion but not for F6H8-lecithin in a whole blood assay. Both F6H8-cEM were able to carry α-tocopherol as a model drug. Animals with AKI treated with the F6H8-lecithin emulsion showed a significantly better renal function and less infiltration of inflammatory cells in renal tissue compared to the control, while inflammatory markers in renal tissue, except HO-1, were not affected by F6H8-lecithin.

Conclusions

Pluronic^® F68 does not seem suitable as a biocompatible surfactant for F6H8-cEM. The injured kidney was not negatively influenced by the F6H8-lecithin emulsion. Lecithin-stabilized F6H8-cEM could be tested for preclinical studies as a carrier system for lipophilic agents.

19F Oximetry with semifluorinated alkanes

This work examines the variation of longitudinal relaxation rate R1(= 1/T1) of the ¹⁹F-CF₃-resonance of semifluorinated alkanes (SFAs) with oxygen tension (pO₂), temperature (T) and pH in vitro. Contrary to their related perfluorocarbons (PFCs), SFA are amphiphilic and facilitate stable emulsions, a prerequisite for clinical use. A linear relationship between R1 and pO₂ was confirmed for the observed SFAs at different temperatures. Using a standard saturation recovery sequence, T1 has been successfully measured using fluorine ¹⁹F-MRI with a self-constructed birdcage resonator at 9.4 T. A calibration curve to calculate pO₂ depending on T and R1 was found for each SFA used. In contrast to the commonly used PFC, SFAs are less sensitive to changes in pO₂, but more sensitive to changes in temperature. The influence of pH to R1 was found to be negligible.