Towards a better mechanistic comprehension of drug permeation and absorption: Introducing the diffusion-partitioning interplay

Targeting tumor extracellular matrix with nanoparticles to circumvent therapeutic resistance

Each stage of tumor development is intrinsically linked to the tumor microenvironment (TME), wherein the extracellular matrix (ECM) serves as a vital and abundant component in tumor tissues. The ECM is a non-cellular, three-dimensional macromolecular network scaffold that provides structural support to cells, stores bioactive molecules, and mediates signaling pathways through specific binding to cell surface receptors. Moreover, the ECM in tumor tissues plays a crucial role in impeding drug diffusion and resisting apoptosis induced by conventional anti-cancer therapies that primarily target cancer cells. Therefore, directing attentions towards the tumor ECM can facilitate the identification of novel targets and the development of new therapies. This review aims to summarize the composition, structure, remodeling, and function of tumor ECM, its association with drug resistance, and current targeting strategies, with a specific emphasis on nanoparticles (NPs).

Application of a UV-vis spectrometer to investigate the effect of dissolution media on the diffusivity of small molecules and proteins

To date, the commonly used methods for diffusion coefficient measurements have some hurdles that prevent them from being widely applied in pharmaceutical laboratories. This study aimed to modify a method developed by di Cagno et al. based on the use of a UV-Vis spectrometer and apply the method to investigate the effect of dissolution media on the diffusivity of small molecules and proteins. A total of five small molecules and two proteins in different aqueous media and polymer solutions were investigated in this study. By attaching a 3D-printed cover with an open slit to a standard UV-Vis cuvette, the incident UV light could only pass through the open slit to measure the local drug concentration. During the diffusion experiment, drug molecules diffused from the cuvette bottom to the slit. According to the concentration measured as a function of time, diffusion coefficient was calculated based on Fick's law of diffusion using the analytical and numerical approaches. As a result, diffusion coefficients could be accurately measured with high reproducibility. The results also suggested that different media could affect the diffusion coefficients of small molecules by < 10% and proteins by < 15%. Since the UV-Vis spectrometer is a routine instrument, this method can potentially be employed by many pharmaceutical laboratories for diffusion coefficient measurements.

Shifting the Focus from Dissolution to Permeation: Introducing the Meso-fluidic Chip for Permeability Assessment (MCPA)

In response to the growing ethical and environmental concerns associated with animal testing, numerous in vitro tools of varying complexity and biorelevance have been developed and adopted in pharmaceutical research and development. In this work, we present one of these tools, i.e., the Meso-fluidic Chip for Permeability Assessment (MCPA), for the first time. The MCPA combines an artificial barrier (PermeaPad®) with an organ-on-chip device (MIVO®) and real-time automated concentration measurements, to yield a sustainable, yet effortless method for permeation testing. The system offers three major physiological aspects, i.e., a biomimetic membrane, an optimal membrane interfacial area-to-donor-volume-ratio (A/V) and a physiological flow on the acceptor/basolateral side, which makes the MPCA an ideal candidate for mechanistic studies and excellent in vivo bioavailability predictions. We validated the method with a handful of assorted drug compounds in unstirred and stirred donor conditions, before exploring its applicability as a tool for dissolution/permeation testing on a BCS class III/I drug (pyrazinamide) crystalline adducts and BCS class II/IV (hydrocortisone) amorphous solid dispersions. The results were highly reproducible and clearly displayed the method's potential for evaluating the performance of enabling formulations, and possibly even predicting in vivo performance. We believe that, upon further development, the MCPA will serve as a useful in vitro tool that could push sustainability into pharmaceutics by refining, reducing and replacing animal testing in early-stage drug development.

Emerging mechanisms of the unfolded protein response in therapeutic resistance: from chemotherapy to Immunotherapy

The accumulation of unfolded or misfolded proteins in the endoplasmic reticulum (ER) causes ER stress and activates the unfolded protein response (UPR). As an adaptive cellular response to hostile microenvironments, such as hypoxia, nutrient deprivation, oxidative stress, and chemotherapeutic drugs, the UPR is activated in diverse cancer types and functions as a dynamic tumour promoter in cancer development; this role of the UPR indicates that regulation of the UPR can be utilized as a target for tumour treatment. T-cell exhaustion mainly refers to effector T cells losing their effector functions and expressing inhibitory receptors, leading to tumour immune evasion and the loss of tumour control. Emerging evidence suggests that the UPR plays a crucial role in T-cell exhaustion, immune evasion, and resistance to immunotherapy. In this review, we summarize the molecular basis of UPR activation, the effect of the UPR on immune evasion, the emerging mechanisms of the UPR in chemotherapy and immunotherapy resistance, and agents that target the UPR for tumour therapeutics. An understanding of the role of the UPR in immune evasion and therapeutic resistance will be helpful to identify new therapeutic modalities for cancer treatment. Video Abstract.

Interpreting permeability as a function of free drug fraction: The case studies of cyclodextrins and liposomes

In order to solubilize poorly soluble active pharmaceutical ingredients, various strategies have been implemented over the years, including the use of nanocarriers, such as cyclodextrins and liposomes. However, improving a drug's apparent solubility does not always translate to enhanced bioavailability. This work aimed to investigate to which extent complexation with cyclodextrins and incorporation into liposomes influence drug in vitro permeability and to find a mechanistic description of the permeation process. For this purpose, we investigated hydroxypropyl-β-cyclodextrin (HP-β-CD) and phosphatidylcholine liposomes formulations of three chemically diverse compounds (atenolol, ketoprofen and hydrocortisone). We studied drug diffusion of the formulations by UV-localized spectroscopy and advanced data fitting to extract parameters such as diffusivity and bound-/free drug fractions. We then correlated this information with in vitro drug permeability obtained with the novel PermeaPadⓇ barrier. The results showed that increased concentration of HP-β-CD leads to increased solubilization of the poorly soluble unionized ketoprofen, as well as hydrocortisone. However, this net increment of apparent solubility was not proportional to the increased flux measured. On the other hand, normalising the flux over the empirical free drug concentration, i.e., the free fraction, gave a meaningful absolute permeability coefficient. The results achieved for the liposomal formulation were consistent with the finding on cyclodextrins. In conclusion, we proved the adequacy and usefulness of our method for calculating free drug fractions in the examined enabling formulations, supporting the validity of the established drug diffusion/permeation theory that the unbounded drug fraction is the main driver for drug permeation across a membrane.

Designing a Novel Coamorphous Salt Formulation of Telmisartan with Amlodipine to Enhance Permeability and Oral Absorption

Coamorphous formulation is a useful approach for enhancing the solubility of poorly water-soluble drugs via intermolecular interactions. In this study, a hydrogen-bonding-based coamorphous system was developed to improve drug solubility, but it barely changed the apparent permeability (Papp) of the drug. This study aimed to design a novel coamorphous salt using ionic interactions to improve drug permeability and absorption. Telmisartan (TMS), with an acidic group, was used to form a coamorphous salt with basic amlodipine (AML). Evaluation of the physicochemical properties confirmed the formation of a coamorphous salt via ionic interactions between the amine group of AML and the carboxyl group of TMS at a molar ratio of 1:1. The coamorphous salt of TMS/AML enhanced the partitioning of both drugs into octanol, indicating increased lipophilicity owing to the interaction between TMS and AML. The coamorphous salt dramatically enhanced TMS solubility (99.8 times that of untreated TMS) and decreased AML solubility owing to the interaction between TMS and AML. Although the coamorphous salt showed a decreased Papp in the permeation study in the presence of a thicker unstirred water layer (UWL) without stirring, Papp increased in the presence of a thinner UWL with stirring. The oral absorption of TMS from the coamorphous salt increased by up to 4.1 times compared to that of untreated TMS, whereas that of AML remained unchanged. Although the coamorphous salt with increased lipophilicity has a disadvantage in terms of diffusion through the UWL, the UWL is thin in human/animal bodies owing to the peristaltic action of the digestive tract. Dissociation of the coamorphous salt on the membrane surface could contribute to the partitioning of the neutral form of drugs to the membrane cells compared with untreated drugs. As a result, coamorphous salt formation has the advantage of improving the membrane permeation and oral absorption of TMS, owing to the enhanced solubility and supply of membrane-permeable free TMS on the surface of the membrane.

A method for improving the properties of famotidine

According to crystal engineering, the pharmaceutical intermediate m-nitrobenzoic acid (MNBA), which contains a carboxylic acid group, was selected as a coformer (CCF) for drug cocrystallization with famotidine (FMT), and a new stable FMT salt cocrystal was synthesized. The salt cocrystals were characterized by scanning electron microscopy, differential scanning calorimetry, thermogravimetric analysis, infrared spectroscopy, powder X-ray diffraction and X-ray single crystal diffraction. A single crystal structure of FMT-MNBA (1:1) was successfully obtained, and then the solubility and permeability of the newly synthesized salt cocrystal were studied. The results showed that, compared with free FMT, the FMT from the FMT-MNBA cocrystal showed improved permeability. This study provides a synthetic method to improve the permeability of BCS III drugs, which will contribute to the development of low-permeability drugs.

Design and Characterization of an Ethosomal Gel Encapsulating Rosehip Extract

Rising environmental awareness drives green consumers to purchase sustainable cosmetics based on natural bioactive compounds. The aim of this study was to deliver Rosa canina L. extract as a botanical ingredient in an anti-aging gel using an eco-friendly approach. Rosehip extract was first characterized in terms of its antioxidant activity through a DPPH assay and ROS reduction test and then encapsulated in ethosomal vesicles with different percentages of ethanol. All formulations were characterized in terms of size, polydispersity, zeta potential, and entrapment efficiency. Release and skin penetration/permeation data were obtained through in vitro studies, and cell viability was assessed using an MTT assay on WS1 fibroblasts. Finally, ethosomes were incorporated in hyaluronic gels (1% or 2% w/v) to facilitate skin application, and rheological properties were studied. Rosehip extract (1 mg/mL) revealed a high antioxidant activity and was successfully encapsulated in ethosomes containing 30% ethanol, having small sizes (225.4 ± 7.0 nm), low polydispersity (0.26 ± 0.02), and good entrapment efficiency (93.41 ± 5.30%). This formulation incorporated in a hyaluronic gel 1% w/v showed an optimal pH for skin application (5.6 ± 0.2), good spreadability, and stability over 60 days at 4 °C. Considering sustainable ingredients and eco-friendly manufacturing technology, the ethosomal gel of rosehip extract could be an innovative and green anti-aging skincare product.

Commercially Available Cell-Free Permeability Tests for Industrial Drug Development: Increased Sustainability through Reduction of In Vivo Studies

Replacing in vivo with in vitro studies can increase sustainability in the development of medicines. This principle has already been applied in the biowaiver approach based on the biopharmaceutical classification system, BCS. A biowaiver is a regulatory process in which a drug is approved based on evidence of in vitro equivalence, i.e., a dissolution test, rather than on in vivo bioequivalence. Currently biowaivers can only be granted for highly water-soluble drugs, i.e., BCS class I/III drugs. When evaluating poorly soluble drugs, i.e., BCS class II/IV drugs, in vitro dissolution testing has proved to be inadequate for predicting in vivo drug performance due to the lack of permeability interpretation. The aim of this review was to provide solid proofs that at least two commercially available cell-free in vitro assays, namely, the parallel artificial membrane permeability assay, PAMPA, and the PermeaPad^® assay, PermeaPad, in different formats and set-ups, have the potential to reduce and replace in vivo testing to some extent, thus increasing sustainability in drug development. Based on the literature review presented here, we suggest that these assays should be implemented as alternatives to (1) more energy-intense in vitro methods, e.g., refining/replacing cell-based permeability assays, and (2) in vivo studies, e.g., reducing the number of pharmacokinetic studies conducted on animals and humans. For this to happen, a new and modern legislative framework for drug approval is required.

Nano-Spray-Dried Levocetirizine Dihydrochloride with Mucoadhesive Carriers and Cyclodextrins for Nasal Administration

Antihistamines such as levocetirizine dihydrochloride (LC) are commercially used in oral tablets and oral drops to reduce allergic symptoms. In this study, LC was nano-spray-dried using three mucoadhesive polymers and four cyclodextrin species to form composite powders for nasal administration. The product was composed of hydroxypropyl methylcellulose polymer, including LC as a zwitterion, after neutralization by NaOH, and XRD investigations verified its amorphous state. This and a sulfobutylated-beta-cyclodextrin sodium salt-containing sample showed crystal peaks due to NaCl content as products of the neutralization reaction in the solutions before drying. The average particle size of the spherical microparticles was between 2.42 and 3.44 µm, except for those containing a polyvinyl alcohol excipient, which were characterized by a medium diameter of 29.80 µm. The drug was completely and immediately liberated from all the samples at pH 5.6 and 32 °C; i.e., the carriers did not change the good dissolution behavior of LC. A permeability test was carried out by dipping the synthetic cellulose ester membrane in isopropyl myristate using modified horizontal diffusion cells. The spray-dried powder with β-cyclodextrin showed the highest permeability (188.37 µg/cm²/h), as this additive was the least hydrophilic. Products prepared with other cyclodextrins (randomly methylated-beta-cyclodextrin, sulfobutylated-beta-cyclodextrin sodium salt and (hydroxypropyl)-beta-cyclodextrin) showed similar or slightly higher penetration abilities than LC. Other polymer excipients resulted in lower penetration of the active agent than the pure LC.

Modelling drug diffusion through unstirred water layers allows real-time quantification of free/loaded drug fractions and release kinetics from colloidal-based formulations

The correlation between in vivo and in vitro data is yet not sufficiently optimized to allow a significant reduction and replacement of animal testing in pharmaceutical development. One of the main reasons for this lies in the poor mechanistic understanding and interpretation of the physical mechanisms enabling formulation rely on for deploying the drug. One mechanism that still lacks a proper interpretation is the kinetics of drug release from nanocarriers. In this work, we investigate two different types of classical enabling formulations - i) cyclodextrin solutions and ii) liposomal dispersions - by a combination of an experimental method (i.e. UV-Vis localized spectroscopy) and mathematical modelling/numerical data fitting. With this approach, we are able to discriminate precisely between the amount of drug bound to nanocarriers or freely dissolved at any time point; in addition, we can precisely estimate the binding and diffusivity constants of all chemical species (free drug/bound drug). The results obtained should serve as the first milestone for the further development of reliable in vitro/in silico models for the prediction of in vivo drug bioavailability when enabling formulations are used.

P-glycoprotein-mediated transport in a mucus-supplemented Caco-2 cell model in the presence of different surfactants

The aim of the present study was to investigate if mucus applied to Caco-2 cell monolayers protects cells from high concentrations of surfactants, while still allowing for an identification of the surfactant's inhibitory effects on P-glycoprotein (P-gp). Two types of porcine mucin and six surfactants (Polysorbate 20 (PS20) and 80 (PS80), Kolliphor EL (Kol. EL) and RH40 (Kol. RH40), Labrafil M 2125 CS (L.fil) and Labrasol (L.sol)) were applied to Caco-2 cells, and TEER, paracellular transport and P-gp mediated digoxin transport was measured. The results showed that 15% porcine mucin type II was incompatible with Caco-2 cell monolayer integrity, resulting in a dramatic drop in monolayer TEER and increased mannitol transport. In contrast, mucin type III was compatible with Caco-2 cell monolayers in the concentration range of 2.5-15% without substantially disturbing barrier properties. The highest concentration of mucin type III impaired the ability of all six surfactants to decrease P-gp mediated digoxin transport. Subsequently lowering the mucin concentration to 5% facilitated adequate protection of cells and enabled e.g., 5% PS20 to inhibit P-gp mediated digoxin transport. Overall, the present work is useful for early-stage permeability investigations on how mucus affects P-gp mediated transport in the presence of formulation excipients.