The clinical and radiological outcomes of the LISS plate for distal femoral fractures: a systematic review

Severity of Complications after Locking Plate Osteosynthesis in Distal Femur Fractures

Background: Locked plating for distal femur fractures is widely recommended and used. We systematically reviewed clinical studies assessing the benefits and harms of fracture fixation with locked plates in AO/OTA Type 32 and 33 femur fractures. Methods: A comprehensive literature search of PubMed, Embase, Cinahl, Web of Science, and the Cochrane Database was performed. The studies included randomized and non-randomized clinical trials, observational studies, and case series involving patients with distal femur fractures. Studies of other fracture patterns, studies conducted on children, pathological fractures, cadaveric studies, animal models, and those with non-clinical study designs were excluded. Results: 53 studies with 1788 patients were found to satisfy the inclusion and exclusion criteria. The most common harms were nonunion (14.8%), malunion (13%), fixation failure (5.3%), infection (3.7%), and symptomatic implant (3.1%). Time to full weight-bearing ranged from 5 to 24 weeks, averaging 12.3 weeks. The average duration of follow-up was 18.18 months, ranging from 0.5 to 108 months. Surgical time ranged between 40 and 540 min, with an average of 141 min. The length of stay in days was 12.7, ranging from 1 to 61. The average plate length was ten holes, ranging from 5 to 20 holes. Conclusion: This review aimed to systematically synthesize the available evidence on the risk associated with locked plating osteosynthesis in distal femur fractures. Nonunion is the most common harm and is the primary cause of reoperation. The overall combined risk of a major and critical complication (i.e., requiring reoperation) is approximately 20%.

Radiographic Union Assessment in Surgically Treated Distal Femur Fractures: A Systematic Review

BACKGROUND

Distal femur fractures are known to have challenging nonunion rates. Despite various available treatment methods aimed to improve union, optimal interventions are yet to be determined. Importantly, there remains no standard agreement on what defines radiographic union. Although various proposed criteria of defining radiographic union exist in the literature, there is no clear consensus on which criteria provide the most precise measurement. The use of inconsistent measures of fracture healing between studies can be problematic and limits their generalizability. Therefore, this systematic review aims to identify how fracture union is defined based on radiographic parameters for surgically treated distal femur fractures in current literature.

METHODS

In accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines, Medline, EMBASE, Cochrane Central Register of Controlled Trials, and Web of Science Core Collection databases were searched from inception to October 2022. Studies that addressed surgically treated distal femur fractures with reported radiographic union assessment were included. Outcomes extracted included radiographic definition of union; any testing of validity, reliability, or responsiveness; reported union rate; reported time to fracture union; and any functional outcomes correlated with radiographic union.

RESULTS

Sixty articles with 3,050 operatively treated distal femur fractures were included. Operative interventions included lateral locked plate (42 studies), intramedullary nail (15 studies), dynamic condylar screw or blade plate (7 studies), dual plate or plate and nail construct (5 studies), distal anterior-posterior/posterior-anterior screws (1 study), and external fixation with a circular frame (1 study). The range of mean follow-up time reported was 4.3 to 44 months. The most common definitions of fracture union included "bridging or callus formation across 3 of 4 cortices" in 26 (43%) studies, "bony bridging of cortices" in 21 (35%) studies, and "complete bridging of cortices" in 9 (15%) studies. Two studies included additional assessment of radiographic union using the Radiographic Union Scale in Tibial fracture (RUST) or modified Radiographic Union Scale in Tibial fracture (mRUST) scores. One study included description of validity, and the other study included reliability testing. The reported mean union rate of distal femur fractures was 89% (range 58%-100%). The mean time to fracture union was documented in 49 studies and found to be 18 weeks (range 12-36 weeks) in 2,441 cases. No studies reported correlations between functional outcomes and radiographic parameters.

CONCLUSION

The current literature evaluating surgically treated distal femur fractures lacks consistent definition of radiographic fracture union, and the appropriate time point to make this judgement is unclear. To advance surgical optimization, it is necessary that future research uses validated, reliable, and continuous measures of radiographic bone healing and correlation with functional outcomes.

LEVEL OF EVIDENCE

Level IV. See Instructions for Authors for a complete description of levels of evidence.

Combined nail-plate constructs in the management of osteoporotic native distal femoral fractures: a systematic review of the available evidence

PURPOSE

Distal femoral fractures account for 4-6% of fragility fractures. These may be managed using a combined nail-plate construct (NPC). The use of NPCs is gaining traction. Whilst several theoretical advantages exist, there is little evidence reporting on binary or patient-reported outcomes. The aim of the current study was to perform a systematic review of the available literature pertaining to NPCs and their treatment of native distal femoral fractures, appraising the outcomes and focusing on the rationale for their increasing uptake in recent literature.

METHODS

A comprehensive search of MEDLINE, EMBASE, Clinical Key, PubMed and Cochrane library was performed from date of inception up to in August 9, 2022. All study languages were included initially. A further Google Scholar search review was performed to identify any other studies not identified in the database interrogation. Studies were eligible if they reported on the use of nail-plate constructs in managing distal femoral fractures. Any outcome metric was permitted. The study was conducted in accordance with PRISMA guidelines. Risk of bias was assessed using the Methodological Index for non-randomised Studies tool. Quantitative analysis was performed using a log odds ratio random effects model. The Knapp-Hartung adjustment was utilised if the total number of included studies was < 5. Study effect sizes and appropriate plots were constructed to illustrate the outcomes data.

RESULTS

A total of four studies were eligible for inclusion. Study data was extracted and summarised with their relevant outcomes presented. The literature review demonstrated that the use of NPCs led to significantly earlier full weight bearing (p < 0.001) and had reduced non-union rates over a single construct, without affecting infection rates (12.5% vs. 5.6%; p = 0.289) and significantly lower implant failure rates (10.5% vs. 0%; p = 0.011). A meta-analysis is performed of available studies and Forrest plots presented.

CONCLUSION

The use of NPC in the management of native osteoporotic DFFs is gaining traction but the available evidence is of low grade with significant heterogeneity in small cohorts of patients. We suggest that a large-scale, multicentre prospective study should be performed, with agreed functional and radiological outcome metrics, to provide a more robust evidence base.

An analytical model of lateral condylar plate working length

BACKGROUND

The locking plate is a common device to treat distal femur fractures. Healing is affected by construct stiffness, thus many surgeon-controlled variables such as working length have been examined for their effects on strain at the fracture. No convenient analytical model which aids surgeons in determining working length has yet been described. We propose an analytical model and compare it to finite element analysis and cadaveric biomechanical testing.

METHODS

First, an analytical model based on a cantilever beam equation was derived. Next, a finite element model was developed based on a CT scan of a "fresh-frozen" cadaveric femur. Third, biomechanical testing in single-leg stance loading was performed on the cadaver. In all methods, strain at the fracture was recorded. An ANCOVA test was conducted to compare the strains.

FINDINGS

In all models, as the working length increased so did strain. For strain at the fracture, the shortest working length (35 mm) had a strain of 8% in the analytical model, 9% in the finite element model, and 7% for the cadaver. The longest working length (140 mm) demonstrated strain of 15% in the analytical model, and the finite element and biomechanical tests both demonstrated strain of 14%.

INTERPRETATION

The strain predicted by the analytical model was consistent with the strain observed in both the finite element and biomechanical models. As demonstrated in existing literature, increasing the working length increases strain at the fracture site. Additional work is required to refine and establish validity and reliability of the analytical model.

The double-plate fixation technique prevents varus collapse in AO type C3 supra-intercondylar fracture of the distal femur

INTRODUCTION

Varus collapse followed by osteosynthesis for distal femoral fractures with conventional implants has been well documented but is seldom mentioned in fractures managed with locking plates. The purpose of this study was to assess the incidence of varus collapse after treating complex supra-intercondylar fractures of the distal femur (AO type C3) using a Single Plate (SP) or Double Plate (DP) fixation technique.

MATERIALS AND METHODS

We retrospectively reviewed 357 patients with distal femoral fractures who were treated at our hospital between 2006 and 2017. After excluding cases of infection, malignancy, periprosthetic fracture, revision surgery, pediatric fracture, and extra-articular fracture, 54 patients were included in the study. All demographic data and radiological and clinical outcomes were reviewed and analyzed.

RESULTS

There were 54 patients enrolled into this study with age from 15 to 85 years old (mean 41.6, SD = 19.9), and 32 of them were open fractures (59%). The patients were further divided into either an SP (n = 15) or a DP group (n = 39). Demographics, including age, sex, injury severity score, and open fracture type, were all compatible between the two groups. The overall nonunion rate was 25.9% (n = 14; 6 from the SP and 8 from the DP group; p = 0.175). The varus collapse rate was 9.3% (n = 5; 4 from the SP and 1 from the DP group (p = 0.018).

CONCLUSIONS

The varus collapse rate after osteosynthesis with a single lateral locking plate could be as high as 26.7% in AO type C3 fractures of the distal femur, which would be decreased to 2.6% by adding a medial buttress plate. Surgeons should consider DP fixation to avoid varus collapse in severely comminuted complete intra-articular fractures of the distal femur.

Distal femur fractures management and evolution in the last century

PURPOSE

The purpose of this historical review is to illustrate the progression and evolution of treatment for distal femur fractures.

METHODS

Scientific literature was searched for descriptions of treatment for distal femur fractures to provide an in-depth overview of the topic, with emphasis on the evolution of surgical constructs used to treat these fractures.

RESULTS

Prior to the 1950s, distal femur fractures were treated nonoperatively, resulting in considerable morbidity, limb deformity, and limited function. As principles of surgical intervention for fractures emerged in the 1950s, surgeons developed conventional straight plates to better stabilize distal femur fractures. Angle blade plates and dynamic condylar screws emerged out of this scaffolding to prevent post-treatment varus collapse. Meanwhile, intramedullary nails, and later, in the 1990s, locking screws, were introduced to minimize soft tissue disruption. Treatment failure led to the development of locking compression plates with the advantage of accommodating either locking or nonlocking screws. Despite this advancement, the rare but significant incidence of nonunion has not been eliminated, leading to the recognition of the biomechanical environment as important for prevention and the development of active plating techniques.

CONCLUSION

Emphasis for the surgical treatment of distal femur fractures has incrementally progressed over time, with initial focus on complete stabilization of the fracture while the biological environment surrounding the fracture was ignored. Techniques slowly evolved to minimize soft tissue disruption, allow more ease of implant placement at the fracture site, and attend to the systemic health of the patient, while simultaneously ensuring appropriate fracture fixation. Through this dynamic process, the desired results of complete fracture healing and maximization of functional outcomes have emerged.

Clinical effect of closed reduction minimally invasive fixation in intra-articular comminuted fractures of the femoral condyle

Objective

To evaluate the advantages of double reverse traction closed reduction combined with minimally invasive fixation in treating femoral condylar comminuted fractures.

Methods

We retrospectively enrolled a total of 24 patients with femoral condylar comminuted fractures (AO = 33C3) admitted to Third Hospital of Hebei Medical University from March 2018 to February 2020. The patients were divided into two groups: experimental group (double reverse traction, n = 12) and control group (conventional surgery, n = 12). Patient demographics, fracture characteristics, operation time, incision length, and postoperative complications were then collected. The Hospital for Special Surgery (HSS) scores were recorded at the last follow-up visit.

Results

The average surgical time was 52.2 (41-73) min in the experimental group and 71.2 (45-103) min in the control group. In addition, the mean total incision length was 13.8 (11-17) cm in the experimental group and 16.3 (14-19) cm in the control group. The average HHS scores at the final follow-up were 86.3 (78-93) and 82.7 (76-90) in the experimental group and control group, respectively.

Conclusion

It was found that double reverse traction closed reduction combined with minimally invasive fixation can provide good repositioning results and functional extremity. Moreover, patients tolerate postoperative functional knee exercises well.

Application of Cortical Bone Plate Allografts Combined with Less Invasive Stabilization System (LISS) Plates in Fixation of Comminuted Distal Femur Fractures

Background and Objectives: At present, the management of comminuted distal femur fractures remains challenging for orthopedic surgeons. The aim of this study is to report a surgical treatment for comminuted distal femur fractures using supplementary medial cortical bone plate allografts in conjunction with the lateral less invasive stabilization system (LISS) plates. Materials and Methods: From January 2009 to January 2014, the records of thirty-three patients who underwent supplementary medial cortical bone plate allografts combined with lateral LISS plates fixation were reviewed. Clinical and radiographic data were collected during regular postoperative follow-up visits. Functional outcomes were determined according to the special surgery knee rating scale (HSS) used at the hospital. Results: Thirty patients were followed for 13 to 73 months after surgery, with an average follow-up time of 31.3 months. The mean time to bone union was 5.4 months (range of 3-12 months) and the mean range of knee flexion was 105.6° (range of 80-130°). Of the remaining patients, 10 had a score of "Excellent", while 10 had a score of "Good". Three patients had superficial or deep infections, one patient had nonunion that required bone grafting, and one patient had post-traumatic knee arthritis. Conclusions: Based on these promising results, we propose that supplementary medial cortical bone plate allografts combined with lateral LISS plate fixation may be a good treatment option for comminuted distal femur fractures. This treatment choice not only resulted in markedly improved stability on the medial side of the femur, but also satisfactory outcomes for distal femoral fractures.

The Fragility Fracture Postoperative Mobilisation multicentre audit : the reality of weightbearing practices following operations for lower limb fragility fractures

AIMS

The purpose of this study was to determine the weightbearing practice of operatively managed fragility fractures in the setting of publically funded health services in the UK and Ireland.

METHODS

The Fragility Fracture Postoperative Mobilisation (FFPOM) multicentre audit included all patients aged 60 years and older undergoing surgery for a fragility fracture of the lower limb between 1 January 2019 and 30 June 2019, and 1 February 2021 and 14 March 2021. Fractures arising from high-energy transfer trauma, patients with multiple injuries, and those associated with metastatic deposits or infection were excluded. We analyzed this patient cohort to determine adherence to the British Orthopaedic Association Standard, "all surgery in the frail patient should be performed to allow full weight-bearing for activities required for daily living".

RESULTS

A total of 19,557 patients (mean age 82 years (SD 9), 16,241 having a hip fracture) were included. Overall, 16,614 patients (85.0%) were instructed to perform weightbearing where required for daily living immediately postoperatively (15,543 (95.7%) hip fracture and 1,071 (32.3%) non-hip fracture patients). The median length of stay was 12.2 days (interquartile range (IQR) 7.9 to 20.0) (12.6 days (IQR 8.2 to 20.4) for hip fracture and 10.3 days (IQR 5.5 to 18.7) for non-hip fracture patients).

CONCLUSION

Non-hip fracture patients experienced more postoperative weightbearing restrictions, although they had a shorter hospital stay. Patients sustaining fractures of the shaft and distal femur had a longer median length of stay than demographically similar patients who received hip fracture surgery. We have shown a significant disparity in weightbearing restrictions placed on patients with fragility fractures, despite the publication of a national guideline. Surgeons intentionally restrict postoperative weightbearing in the majority of non-hip fractures, yet are content with unrestricted weightbearing following operations for hip fractures. Cite this article: Bone Joint J 2022;104-B(8):972-979.

Incidence of nonunion after surgery of distal femoral fractures using contemporary fixation device: a meta-analysis

PURPOSE

Nonunion is the most frequent cause of reoperation and is associated with high morbidity after distal femur fracture (DFF). We examined the rates of nonunion requiring reoperation after fixation for DFF using a locking compression plate (LCP) or retrograde intramedullary nail (RIMN).

METHODS

We included four studies comparing LCP and RIMN and 38 single-cohort studies reporting LCP or RIMN. In total, 2156 femurs were included and 166 non-unions were detected. We conducted a pair-wise meta-analysis (with a fixed-effects model) on the four comparative studies and a proportional meta-analysis on the 38 articles to estimate the nonunion rate. We performed sensitivity analysis by comparing studies using LCP with less invasive surgical systems (LISS) with those that used RIMN.

RESULTS

The pairwise meta-analysis showed a similar nonunion rate between the groups [odds ratio: 1.02; 95% confidence interval (CI) 0.94-1.11, p = 0.633]. According to proportional meta-analysis, the pooled prevalence of nonunion was 5% (95% CI 4-7) totally, 6% (95% CI 4-8) in the LCP group, and 4% (95% CI 2-6) in the RIMN group (heterogeneity: p = 0.105). According to the sensitivity analysis, there was no difference in the union rate. The pooled prevalence of nonunion from sensitivity analysis was 4 % (95% CI, 3-5); it was 4% (95% CI, 3-6) in LCP with LISS and was 4% (95% CI, 2-6) in RIMN group (heterogeneity: p = 0.941).

CONCLUSION

Approximately 5% of patients who underwent LCP or RIMN fixation developed nonunion. Therefore, LCP and RIMN are effective DFF techniques and mastering one of them is essential.

Minimally invasive plate osteosynthesis: An update of practise

Since its conception in 1989, minimally invasive plate osteosynthesis (MIPO) has gained widespread popularity. It has been studied in over forty countries with most of the publications originating from Asia, Europe and North America. This review aims to describe the scientific path of MIPO from the very beginning to where it stands in current day times; study the pattern and contributing factors influencing its global spread. Finally, the up to date evidence is discussed with regard to several anatomical regions in which MIPO is mostly used. In the meantime, MIPO treads steadily towards accomplishing the same or better outcomes for more and more indications with the goal to leave a smaller surgical footprint to allow for undisturbed bone healing.

Treatment of Periarticular Fractures of the Knee Using the Less Invasive Stabilization System: A Retrospective Clinical Trial

Introduction

Periarticular fractures of the knee in adults are generally treated with internal fixation. The Less Invasive Stabilization System (LISS) plate, developed by Arbeitsgemeinschaft Osteosynthesefragen (AO)/Association for the Study of Internal Fixation (ASIF) in the late 1990s, allows reduction and biological fixation through smaller incisions without violating periosteal blood supply. It offers several advantages for the treatment of complex periarticular fractures of the knee. In this study, we have aimed to report the results of a single series of these fractures.

Materials and methods

Forty-eight patients with AO type 33 and AO type 41 periarticular knee fractures who were operated between 2009 and 2014 at a single institution were included in this retrospective study. Patient demographics, fracture epidemiology, intraarticular extension, concomitant injuries, American Society of Anesthesiologists (ASA) score, time to union, the average time from admission to surgery, and the mean time from operation to patient discharge were noted. The effect of patient and fracture-related factors on length of hospital stay were evaluated.

Results

The mean follow-up time was 23.7 (12-48) months. The average time from admission till surgery and from surgery till discharge was 10.2 (1-39) and 9.7 (2-35) days, respectively. The average time for union was 6.8 months. Femur fractures healed in mean 6.6 months whereas tibia fractures took 7.1 months to heal. Time from admission to surgery and postoperative hospital stay was longer in patients with higher ASA scores (p<0.01) and open fractures (p<0.001). Patients’ body mass index (BMI) and intraarticular extension of the fracture did not cause an increase in either preoperative or postoperative hospital stay (p>0.05). The presence of concomitant major injuries caused a delay in operation (p<0.05), whereas postoperative hospital stay was not different (p>0.05).

Conclusion

LISS plating provides good stability through a small incision, permits biological fracture healing, may be used in multifragmentary fractures and has low complication rates. It is a good alternative for the treatment of periarticular fractures of the knee.

Impact of osteosynthesis in fracture care: a cost comparison study

Aim: To estimate the health economic impact of osteosynthesis (OS) in fracture care over six decades in 17 high-income countries. Patients & methods: Applying a decision tree model, we assumed a hypothetical absence of OS and compared OS (intervention) with conservative treatment (CONS; comparator). We included patients with femur, tibia and radius fractures (age <65 years) and for proximal femur fractures also elderly patients (≥70 years). Results: We estimated savings in direct and indirect costs of 855 billion Swiss francs in the working age population in addition to 4.6 million years of life gained. In the elderly population, 69 billion Swiss francs were saved in direct costs of proximal femur fractures in addition to 73 million years of life gained. Conclusion: OS contributed to maximize health gains of society.

Plate-on-plate technique for treating peri-implant fractures of distal femoral locking plate: a retrospective study of 11 patients

INTRODUCTION

In this study, we aimed to ascertain the feasibility and reliability of the plate-on-plate technique for peri-implant fractures of the distal femoral locking plate when the distal femoral fracture is still unhealed.

MATERIALS AND METHODS

From January 2007 to December 2016, we enrolled 11 patients who received treatment at our institution. All patients underwent at least 1 year of follow-up. Their medical records, imaging studies, visual analogue scores, walking ability, complications, and functional outcomes at 1 year postoperative based on the Short Form (36) Health Survey (SF-36) scores were retrospectively evaluated.

RESULTS

The average follow-up duration was 20.5 (range 15-30) months. All fractures united with satisfactory alignment, and the average time for union was 27.5 (range 16-40) weeks. The average SF-36 scores at 1 year postoperative was 79.2 (range 72-90). Regarding ambulatory status, all patients could perform unrestricted outdoor ambulation.

CONCLUSION

In our case series, the plate-on-plate technique achieved a good bone union rate and functional outcomes with low complication rates and thus may be a good alternative for managing this difficult type of fracture.

Minimally invasive plate osteosynthesis versus conventional open insertion techniques for osteosynthesis

Osteosynthesis has evolved theoretically and practically throughout its evolution. Similar to trends in other surgical fields, surgical techniques in fracture fixation, such as minimally invasive plate osteosynthesis (MIPO), have moved from large dissections to more tissue sparing methods. These plating techniques have been developed for a variety of bones, but more universal clinical adoption will rely upon improved clinical outcomes. The current review will describe minimally invasive techniques, evaluate their rationale, and summarize evidence for their efficacy.

Healing, nonunion, and re-operation after internal fixation of diaphyseal and distal femoral fractures: a systematic review and meta-analysis

PURPOSE

Nonunion is a highly morbid complication that exacerbates the pain, disability and financial burden of distal and diaphyseal femur fractures. This study examined the modern rates of healing, nonunion, and other complications requiring reoperation of different fixation methods for distal and diaphyseal femur fractures.

METHODS

A systematic review and meta-analysis of all records from PubMed, Embase and the Cochrane Review system was performed. Included studies had >20 acute, non-pathologic distal or diaphyseal femur fractures treated with primary internal fixation. Excluded were studies on abnormal patient/fracture populations, external fixation, or cement/bone graft use.

RESULTS

Thirty-eight studies with 2,829 femoral shaft fractures and 11 studies with 505 distal femur fractures were included. Distal fractures had a lower healing rate (86.6% vs. 93.7%) and a higher re-operation rate (13.4% vs 6.1%) than shaft fractures (p < 0.00001), primarily due to higher rates of mechanical failure (p < 0.00001). Nonunion was the most frequent complication, occurring in 4.7% of distal fractures and 2.8% of shaft fractures. There was no difference between plate and nail fixation of distal fractures in healing, nonunion, or other causes of re-operation. Shaft fractures developed nonunion in 6.6% of unreamed nails and 2.1% of reamed nails (p = 0.002). Nonunion occurred in 2.3% of antegrade nailed fractures and 1.5% of retrograde nailed fractures (p = 0.66).

CONCLUSIONS

Approximately one out of every eight distal fractures and one of every 16 shaft fractures requires re-operation. The most common cause of fixation failure is nonunion. Further research is needed to improve outcomes, particularly in distal femur fractures.

[Current status and progress of clinical research on distal femoral fractures]

Objective

To investigate current status and latest progress of clinical research on distal femoral fractures.

Methods

The related literature was extensively reviewed to summarize the trend of the researches and their clinical application in the treatment of distal femoral fractures.

Results

Distal femoral fractures are likely to occur in young people who suffer from high-energy damage and the elderly with osteoporosis, which is always comminuted and unstable fractures, and often involved in the articular surface and combined with serious soft tissue injury. Therefore, the treatment faces many challenges. External fixation is now used as a temporary means of controlling injury. The vast majority of patients are feasible to internal fixation, including plates system and intramedullary nail system. Different internal fixator also has its own characteristics, such as double plates can strengthen the medial support of the femur, less invasive stabilization system protects the blood supply of fractures, distal cortial locking plate is theoretically more fit for the requirements of bone healing, retrograde intramedullary nail can resist varus and valgus.

Conclusion

The treatment of distal femoral fractures should be based on the type of fracture and the characteristics of internal fixators.

[Flexible internal fixation with locking plate for distal femoral fractures]

Objective

To analyze the effectiveness of flexible internal fixation with locking plate for distal femoral fractures.

Methods

Between January 2015 and June 2016, 21 cases of distal femoral fractures were treated. There were 5 males and 16 females with an average age of 62 years (range, 32-88 years). Injury was caused by falling in 14 cases, by traffic accident in 5 cases, and by falling from height in 2 cases. The fractures located at the left side in 13 cases and the right side in 8 cases. Twenty cases were fresh closed fractures and 1 case was open fracture. According to AO/Association for the Study of Internal Fixation (AO/OTA) typing, there were 5 cases of type 33-A1, 3 of type 33-A2, 8 of type 33-A3, 2 of type 33-C2, and 3 of type 33-C3. The time from injury to operation was 3-13 days (mean, 6.5 days).

Results

All operation incisions healed primarily. Eighteen patients were followed up 12-24 months (mean, 16 months). All fractures healed, and the healing time was 8-24 weeks (mean, 16.6 weeks). The articular surface was smooth and the thigh length was recovered. No screw loosening, plate breakage, valgus or varus of the knee, stiff of the knee or non-unions occurred during follow-up. There was no significant difference in visual analogue scale (VAS) score between at 6 and 12 months after operation ( P>0.05), and the difference was significant bewteen the other time points ( P<0.05). There were significant differences in the range of motion of knee between 1 month and 3, 6, 12 months ( P<0.05); there was no significant difference between 3, 6, and 12 months ( P>0.05). There were significant differences in the Neer scores between 1, 3, 6, and 12 months after operation ( P<0.05). According to Neer score criteria, the results were excellent in 12 cases and good in 6 cases at 12 months after operation.

Conclusion

Flexible internal fixation with locking plate for distal femoral fractures can get good functional recovery.

Factors affecting peri-implant fracture following locking plate for osteoporotic distal femur fractures

INTRODUCTION

The purpose of this study is to evaluate the outcomes and to analyze the risk factors for the occurrence of peri-implant fracture after treatment of osteoporotic distal femoral fractures using a locking plate.

HYPOTHESIS

Risk factors affecting peri-implant fracture exist after locking plate fixation in osteoporotic distal femur fracture.

MATERIALS AND METHODS

Eighty-nine cases (88 patients) with osteoporotic distal femoral fractures were evaluated between January 2006 and January 2014. The cohort included 13 men and 76 women with a mean age of 70.4 (50-91). Mean duration of follow-up was 47.9 months (12 to 106). All patients with distal femoral fracture were treated with a locking compression plate. Bone mineralized densitometry measurement was obtained from all patients. Risk factors including sex, age, rheumatoid arthritis (RA), taking of bisphosphonate, primary or periprosthetic fracture after total knee arthroplasty (TKA), open or closed fracture, types of the most proximal screw (locking/cortical), and number of proximal screws were analyzed. Complication, union, time to union, and range of motion of knee were also evaluated.

RESULTS

All patients had osteoporosis with the mean BMD of -3.16 (-2.5∼-5.4). The mean range of motion of knee was 126 degrees (90-145). Eighty-four cases (94.4%) showed union, the mean time to union was 14 weeks (10-42). Peri-implant fractures occurred in four patients (4.5%) after bone union at mean 37.5 months (14-62) postoperatively. Eight patients had angular deformities of over 5 degrees. Nonunion was observed in 5 cases and superficial wound infection in 2 cases. There were eight patients with RA, two of whom had suffered a peri-implant fracture. In statistical analysis, rheumatoid arthritis or periprosthetic fracture in TKA patients was a risk factor for peri-implant fracture (P=0.039, 0.019, respectively), and other factors showed no statistical differences.

CONCLUSIONS

Treatment using a locking plate showed favorable outcomes in osteoporotic distal femoral fractures. However, peri-implant fracture could occur in patients with RA or periprosthetic fracture after TKA. Therefore, cautious consideration is required for management of osteoporotic distal femur fracture in patients with RA or periprosthetic fracture after TKA. Analysis of more cases will be needed in order to achieve conclusive results.

LEVEL OF EVIDENCE

Therapeutic study, level IV (retrospective study). See the Guidelines for Authors for a complete description of levels of evidence.

Anatomical and radiological evaluation of less invasive stabilisation system (LISS) in correlation with knee lateral collateral ligament insertion

INTRODUCTION

The Less Invasive Stabilisation System (LISS) is an angle-stable plate that enables treatment of distal femoral comminuted and periprosthetic fracture. As it is placed through a minimally-invasive lateral approach, lateral knee pain is a commonly described symptom after its application. This study investigates knee lateral collateral ligament (LCL) iatrogenic injury during LISS plate fixation. A cadaver study was performed and a retrospective radiological investigation with the analysis of its clinical application was conducted to evaluate possible knee LCL damage.

METHODS

The cadaver study included 13 human lower extremities, treated with LISS. After application, lateral knee side was dissected, implants were removed and distances between the drill holes and LCL origin were measured. In the retrospective radiological evaluation, postoperative X-rays for patients treated with distal femoral LISS plate in the University Hospital Regensburg, Germany from January 2010 to December 2015 were examined. Following a protocol described by Pietrini et al., the LCL origin on postoperative X-rays was calculated, both in lateral and anterior-posterior (AP) view, and distances between the plate and its closest locking screw to the LCL origin were measured.

RESULTS

In the cadaver study, the mean distance between the closest drilling hole and the ligament origin was 14.0mm (range 9-21mm; SD 3.8mm). Twenty-two patients matched the inclusion criteria for the retrospective radiological study. In lateral view, the mean distance between the origin and the closest locking screw was 6.3mm (range 0-16.4mm; SD 4.7mm); the mean distance between the origin and the plate was 3.1mm (range 0-13.9mm; SD 4.1mm). In AP view, the mean distance between LCL origin and the nearest screw was 2.4mm (range 0-7.6mm; SD 2.4mm). The mean distance between the origin and the most distal locking screw was 9.2mm (range 0-17.5mm; SD 4.0mm).

DISCUSSION

The LISS is a safe option to treat distal femoral fractures in respect to the LCL. Due to close proximity, the LCL might be harmed; therefore, lateral knee pain or lateral instability after implantation should be assessed in further treatment.

Open Supracondylar-Intercondylar Fractures of the Femur Treatment With Taylor Spatial Frame

OBJECTIVES

To evaluate the Taylor spatial frame (TSF) for primary and definitive fixation of open supracondylar-intracondylar femoral (SIF) fractures.

DESIGN

Retrospective.

SETTING

Level I trauma center.

PATIENTS

Subset of 20 SIF open fractures treated with TSF extracted from a consecutive series of 80 SIF fractures treated between 2007 and 2013.

INTERVENTION

Eighteen (90%) fractures underwent definitive fixation with the TSF; 2 were treated primarily within 24 hours of injury. Mean time interval between primary treatment and secondary TSF was 5 days.

MAIN OUTCOME MEASUREMENTS

Clinical and radiological.

RESULTS

Complete union was obtained in 17 (85%) fractures without additional surgery at an average of 33 weeks. Three nonunions and 1 malunion occurred. No deep infection occurred. Results based on Association for the Study and Application of the Method of Ilizarov criteria: 37% excellent, and 63% good for bone outcomes; 5% excellent, 58% good, and 37% fair for functional outcomes. Neer knee scores were 21% excellent, 68% good, and 11% fair. The mechanical lateral distal femoral angle and anatomic posterior distal femoral angle values were within normal range in 80% and 90% of patients, respectively. Abnormal mechanical axis deviation was observed in 4 (20%) cases (2 had associated tibia fractures).

CONCLUSIONS

Primary and definitive fixation with the TSF are effective. Advantages include continuity of device until union, reduced risk of infection, early mobilization, restoration of primary defect caused by bone loss, easy and accurate application, convertibility and versatility, and improved union rate and range of motion for SIF open fractures.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

‘Modern’ distal femoral locking plates allow safe, early weight-bearing with a high rate of union and low rate of failure

Aims

Fractures of the distal femur can be challenging to manage and are on the increase in the elderly osteoporotic population. Management with casting or bracing can unacceptably limit a patient’s ability to bear weight, but historically, operative fixation has been associated with a high rate of re-operation. In this study, we describe the outcomes of fixation using modern implants within a strategy of early return to function.

Patients and Methods

All patients treated at our centre with lateral distal femoral locking plates (LDFLP) between 2009 and 2014 were identified. Fracture classification and operative information including weight-bearing status, rates of union, re-operation, failure of implants and mortality rate, were recorded.

Results

A total of 127 fractures were identified in 122 patients. The mean age was 72.8 years (16 to 101) and 92 of the patients (75%) were female. A consultant performed the operation in 85 of the cases, (67%) with the remainder performed under direct consultant supervision. In total 107 patients (84%) were allowed to bear full weight immediately. The rate of clinical and radiological union was 81/85 (95%) and only four fractures of 127 (3%) fractures required re-operation for failure of surgery. The 30-day, three- and 12-month mortality rates were 6 (5%), 17 (15%) and 25 (22%), respectively.

Conclusion

Our study suggests an exponential increase in the incidence of a fracture of the distal femur with age, analogous to the population suffering from a proximal femoral fracture. Allowing immediate unrestricted weight-bearing after LDFLP fixation in these elderly patients was not associated with failure of fixation. There was a high rate of union and low rate of re-operation. Cite this article: Bone Joint J 2017;99-B:951–7.

LCP Versus LISS in the Treatment of Open and Closed Distal Femur Fractures: Does it Make a Difference?

OBJECTIVES

We compared the postoperative complication rates between the less invasive stabilization system (LISS) plating and locking compression plate for open and closed distal femoral fracture fixation for superiority.

DESIGN

Retrospective Review.

SETTING

Multicenter.

PARTICIPANTS

Patients identified through a hospital database who were treated for supracondylar femur fractures using LISS or LCP techniques between January 2005 and July 2010.

INTERVENTION

Medical history, patient demographics, injury characteristics, presence of polytrauma, and surgical characteristics were collected for each patient.

MAIN OUTCOME MEASUREMENTS

χ and logistic regression analysis was performed to compare postoperative infection and nonunion/reoperation regarding both plating techniques.

RESULTS

Of 339 distal femoral fractures, 185 (54.6%) were repaired with a LISS plate and 154 (45.4%) were repaired with a LCP. Multivariate analysis revealed only open fractures to be a risk factor for nonunion (Odds ratio 2.42, P = 0.01) and infection (Odds ratio 3.47, P = 0.02), regardless of device used. No difference was seen between either plate type in infection, plate failure, or nonunion.

CONCLUSIONS

Postoperative infection and nonunion rates are comparable between LISS and LCP for both open and closed distal femoral fracture fixation. As no difference was detected between plates, either may be used to treat distal femur fractures. Nonunion rate was higher than expected based on previous reports.

LEVEL OF EVIDENCE

Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

Semi-rigid screws provide an auxiliary option to plate working length to control interfragmentary movement in locking plate fixation at the distal femur

BACKGROUND

Extent and orientation of interfragmentary movement (IFM) are crucially affecting course and quality of fracture healing. The effect of different configurations for implant fixation on successful fracture healing remain unclear. We hypothesize that screw type and configuration of locking plate fixation profoundly influences stiffness and IFM for a given load in a distal femur fracture model.

METHODS

Simple analytical models are presented to elucidate the influence of fixation configuration on construct stiffness. Models were refined with a consistent single-patient-data-set to create finite-element femur models. Locking plate fixation of a distal femoral 10mm-osteotomy (comminution model) was fitted with rigid locking screws (rLS) or semi-rigid locking screws (sLS). Systematic variations of screw placements in the proximal fragment were tested. IFM was quantitatively assessed and compared for different screw placements and screw types.

RESULTS

Different screw allocations significantly affect IFM in a locking plate construct. LS placement of the first screw proximal to the fracture (plate working length, PWL) has a significant effect on axial IFM (p < 0.001). Replacing rLS with sLS caused an increase (p < 0.001) of IFM under the plate (cis-cortex) between +8.4% and +28.1% for the tested configurations but remained constant medially (<1.1%, trans-cortex). Resultant shear movements markedly increased at fracture level (p < 0.001) to the extent that plate working length increased. The ratio of shear/axial IFM was found to enhance for longer PWL. sLS versus rLS lead to significantly smaller ratios of shear/axial IFM at the cis-cortex for PWL of ≥ 62 mm (p ≤ 0.003).

CONCLUSION

Mechanical frame conditions can be significantly influenced by type and placement of the screws in locking plate osteosynthesis of the distal femur. By varying plate working length stiffness and IFM are modulated. Moderate axial and concomitantly low shear IFM could not be achieved through changes in screw placement alone. In the present transverse osteotomy model, ratio of shear/axial IFM with simultaneous moderate axial IFM is optimized by the use of appropriate plate working length of about 42-62 mm. Fixation with sLS demonstrated significantly more axial IFM underneath the plate and may further contribute to compensation of asymmetric straining.

Extremity War Injuries IX: Reducing Disability Within the Military

Extremity War Injury Symposium IX focused on reducing disability within the military, centering on cartilage defects, amputations, and spinal cord injury. Many areas of upper and lower extremity trauma and disability were discussed, including segmental nerve injuries, upper extremity allotransplantation, and the importance of patient-reported functional outcomes compared with the traditionally reported measures. Strategic planning addressed progression toward clinical solutions by setting clear objectives and goals and outlining pathways to address the "translation gap" that often prevents bridging of basic science to clinical application.

Radiological assessment of the safe zone for medial minimally invasive plate osteosynthesis in the distal femur with computed tomography angiography

INTRODUCTION

Surgical treatment options for distal femur fractures include intramedullary nailing or plating using a lateral or lateral parapatellar approach. However, medial plating is required for additional stability in some fractures such as severely comminuted fractures and periprosthetic fractures, and in those for which use of a lateral plate or nail is not appropriate. This study aimed to explore the safe zone for medial minimally invasive plate osteosynthesis of the distal femur with computed tomography angiography.

MATERIAL AND METHODS

In a series of 30 patients, the region of interest between the lesser trochanter (LT) to the adductor tubercle (AT) was divided into six levels (I to VI), and the distance from the femur to the femoral artery (FA) was measured. At each level, the medial half of the femur was divided into eight sections that were assigned ‘A to H’ from anteromedial to posteromedial, and the position of the FA and the deep femoral artery (DFA) was recorded.

RESULTS

The average length from the LT to AT was 295.0 mm. The average distance to FA was 38.0 mm, 29.9 mm, 26.9 mm, 27.0 mm, 21.8 mm, and 12.2 mm from level I to VI, respectively. The FA was positioned posteromedially below level IV and positioned at C–H below level II, which was out of the anterior aspect of the femur. The DFA was in the same location as the FA between levels II and III.

CONCLUSION

The anteromedial aspect of the distal half of the femur is the safe zone, and a long plate can be positioned safely in this zone at the anterior aspect up to the level of 8 cm below the LT.

Mono- versus polyaxial locking plates in distal femur fractures - a biomechanical comparison of the Non-Contact-Bridging- (NCB) and the PERILOC-plate

Background

The aim of this cadaveric study was to compare a polyaxial (NCB®, Zimmer) to a fixed-angle monoaxial locking plate (PERILOC®, Smith & Nephew) in comminuted fractures of the distal femur regarding stability of the construct. Up to date there is no published biomechanical data concerning polyaxial plating in cadaveric distal femurs.

Methods

Fourteen formalin fixed femora were scanned by dual-energy x-ray absorptiometry. As fracture model an unstable supracondylar comminuted fracture was simulated. Fractures were pairwise randomly fixed either with a mono- (group A) or a polyaxial (group B) distal femur plate. The samples were tested in a servohydraulic mechanical testing system starting with an axial loading of 200 N following an increase of 200 N in every step with 500 cycles in every sequence up to a maximum of 2 000 N. The end points were implant failure or relevant loss of reduction. Data records included for each specimen time, number of cycles, axial load and axial displacement. Statistical analysis was performed using the exact Wilcoxon signed rank test.

Results

The mean donor age at the time of death was 75 years. The bone mass density (BMD) of the femurs in both groups was comparable and showed no statistically significant differences. Five bones failed before reaching the maximum applied force of 2000 N. Distribution curves of all samples in both groups, showing the plastic deformation in relation to the axial force, showed no statistically significant differences.

Conclusions

Operative stabilization of distal femur fractures can be successfully and equally well achieved using either a monoaxial or a polyaxial locking plate. Polyaxial screw fixation may have advantages if intramedullary implants are present.

Electronic supplementary material

The online version of this article (doi:10.1186/1471-2474-15-369) contains supplementary material, which is available to authorized users.

Biomechanical design of less invasive stabilization system femoral plates: computational evaluation of the fracture environment

Less Invasive Stabilization System femoral plates are currently accepted as a suitable fixation technique for supra-intercondylar femoral fractures. However, general agreement does not exist regarding the optimum design of this fixator type. Therefore, the aim of this article is to reduce the intrinsic Less Invasive Stabilization System complications by clarifying, from a biomechanical point of view, how the number of screws, the screw connection type (unicortical or bicortical), or the structured position of the screws can influence the outcome of the fracture site. These studies include a specific finite element analysis that determines how several biomechanical variables, such as the movement at the fracture site, are influenced by the preconditions of bone healing. The results of this study show that the screw type affects the mechanical stabilization of the femur to a greater extent than the material type of the Less Invasive Stabilization System femoral plates. The most significant differences among all the analyzed configurations are observed in the shear interfragmentary strain between screw types. Values are approximately 50% higher with unicortical screws than with bicortical ones.

Locked plating for internal fixation of the adult distal femur: influence of the type of construct and hardware on the clinical and radiological outcomes

INTRODUCTION

Distal femoral fractures are rare and serious. Along with traditional internal fixation, new, dedicated hardware have appeared (distal nails, locked plating). We report the results of a multicenter prospective study of these fractures treated with locked plating.

HYPOTHESIS

The short-term results are satisfactory and related to the type of construct and the hardware used, with better results for elastic assemblies and titanium implants.

MATERIALS AND METHODS

From June 2011 to May 2012, 92 patients, mean age 64 years, were included in 12 centres. The fractures were classified as follows: 44 type A, 7 type B, and 41 type C according to the AO classification. Thirteen fractures were open. The plates were uniaxial. The assemblies were elastic in 52 cases, rigid in 26, and unconventional in 14.

RESULTS

Seventy-six patients underwent a radiological follow-up at 6 months and 66 patients had a clinical result evaluated at 1 year. The mean range of motion was 100° and the mean IKS score was 122. The bone union rate was 87% within 12 weeks. Seven valgus, two varus, ten flexion deformities, and three recurvatum greater than 5° were observed (19.5%). Revisions involved two cases with loss of fixation, five cases of infection, and one case of arthrofibrosis (requiring arthroscopic arthrolysis). Secondary bone grafting was carried out in seven cases (four successfully). No influence of the type of assembly or the hardware used was demonstrated.

DISCUSSION

The results remain modest, underscoring the severity of these fractures. Neither the type of construct nor the hardware used influenced the radiological and clinical outcomes. The hypothesis was not confirmed.

LEVEL OF EVIDENCE

Level IV prospective, non-comparative study.

Treatment of distal femur fractures in a regional Australian hospital

AIM: To review our outcomes and compare the results of the Less Invasive Stabilization System (LISS) to other implants for distal femur fracture management at a regional Australian hospital.

METHODS: The LISS is a novel implant for the management of distal femur fractures. It is, however, technically demanding and treatment results have not yet been assessed outside tertiary centres. Twenty-seven patients with 28 distal femur fractures who had been managed surgically at the Mackay Base Hospital from January 2004 to December 2010 were retrospectively enrolled and assessed clinically and radiologically. Outcomes were union, pain, Lysholm score, knee range of motion, and complication rates.

RESULTS: Twenty fractures were managed with the LISS and eight fractures were managed with alternative implants. Analysis of the surgical techniques revealed that 11 fractures managed with the LISS were performed according to the recommended principles (LISS-R) and 9 were not (LISS-N). Union occurred in 67.9% of fractures overall: 9/11 (82%) in the LISS-R group vs 5/9 (56%) in the LISS-N group and 5/8 (62.5%) in the alternative implant group. There was no statistically significant difference between pain, Lysholm score, and complication rates between the groups. However, there was a trend towards the LISS-R group having superior outcomes which were clinically significant. There was a statistically significant greater range of median knee flexion in the LISS-R group with compared to the LISS-N group (P = 0.0143) and compared with the alternative implant group (P = 0.0454).

CONCLUSION: The trends towards the benefits of the LISS procedure when correctly applied would suggest that not only should the LISS procedure be performed for distal femur fractures, but the correct principle of insertion is important in improving the patient’s outcome.

Mid term results of distal femoral fractures treated with a polyaxial locking plate: a multi-center study

Objective :

Locking plates have become a standard implant in the treatment of distal femoral fractures. Newer designs allow polyaxial screw placement as well as the ability to lock the lag screws.

Methods :

The consecutive multi-centre study cohort consists of all distal femoral fractures treated with the NCB® Distal Femur plate (Zimmer, Warsaw, USA) and a minimum follow-up of twelve months. Fracture classification according the AO/ OTA system and the trauma mechanism radiological evaluation and complications were documented. Clinical evaluation consisted of the Short Form SF12 questionnaire (SF12), the Hospital for Special Surgery Score (HSS) and clinical assessment of range of motion.

Results :

Twenty-five patients with twenty-six fractures were available for follow-up with a minimum required follow-up of twelve months. 81% of the fractures were intra-articular. 48% of the patients were multi-traumatised, 38% having open fractures. All except two went to union (92%) with the primary procedure. The HSS Score was 79 (32-99) and the SF 12 (physical and mental) 40 (19-57) and 54 (21-66) at follow-up. There were five patients requiring surgical revision (19%).

Conclusion :

These fractures are often combined with concomitant injuries. Using modern locked implants high union rates can be achieved with a good function and patient satisfaction when respecting biologic and biomechanical principles.

Results in treatment of distal femur fractures using polyaxial locking plate

Indications and techniques of locked plate fixation for the treatment of challenging fractures continue to evolve. As design variant of classic locked plates, the polyaxial locked plate has the ability to alter the screw angle and thereby, enhance fracture fixation. The aim of this observational study was to evaluate clinical and radiographic results in 89 patients with 90 fractures of the distal femur treated, between June 2006 and November 2011, with such a polyaxial locked plating system (Polyax™ Locked Plating System, DePuy, Warsaw, IN, USA). Seventy-seven fractures formed the report of this study. These cases were followed up until complete fracture healing or for a mean time of 77 weeks. At the time of last follow-up, 58 of 77 fractures (75.3 %) progressed to union without complication and radiographic healing occurred at a mean time of 16.3 weeks. Complications occurred in ten fractures that did not affect the healing and in nine fractures that showed delayed or non-union. The mean American Knee Society Score at the time of final follow-up was 83 for the Knee Score and 71.1 for the Functional Score. In conclusion, there is a high union rate for complex distal femoral fractures associated with a good clinical outcome in this series.

Retrograde nailing versus locked plating of extra-articular distal femoral fractures: comparison of 36 cases

OBJECTIVE

The purpose of this study was to retrospectively evaluate the use of locked plating (LP) and retrograde nailing (RN) for treating extra-articular distal femoral fractures.

MATERIALS AND METHODS

From January 2004 to March 2009, 36 patients with extra-articular distal femoral fractures were surgically treated at our Trauma Center. The patients were divided into two groups according to the treatment method, with 19 patients being treated by LP (LP group) and 17 patients via RN (RN group).

RESULTS

The demographics of age (p = 0.460) and gender (p = 0.481) in both LP and RN groups were similar. No differences were found with respect to postoperative malreduction, deep infection, hardware failure, operating time, knee pain, HSS score and range of knee movement. The mean intraoperative blood loss was significantly higher in the RN group (298 ± 65.2 ml, range 200-410) than in the LP group (200 ± 48.9 ml, range 130-300) (p < 0.01). However, a higher rate of union disturbance was observed in the LP group (36.8%) compared to the RN group (5.9%) (p = 0.044).

CONCLUSIONS

The overall union disturbance rate in the LP group was higher than in the RN group. However, further analysis revealed that clinical outcome may largely depend on surgical technique rather than on the choice of implant. Therefore, correct rules (the same for every procedure) should be strictly adhered to, especially in the application of LP.

Advances and future directions for management of trauma patients with musculoskeletal injuries

Musculoskeletal injuries are the most common reason for operative procedures in severely injured patients and are major determinants of functional outcomes. In this paper, we summarise advances and future directions for management of multiply injured patients with major musculoskeletal trauma. Improved understanding of fracture healing has created new possibilities for management of particularly challenging problems, such as delayed union and non union of fractures and large bone defects. Optimum timing of major orthopaedic interventions is guided by increased knowledge about the immune response after injury. Individual treatment should be guided by trading off the benefits of early definitive skeletal stabilisation, and the potentially life-threatening risks of systemic complications such as fat embolism, acute lung injury, and multiple organ failure. New methods for measurement of fracture healing and function and quality of life outcomes pave the way for landmark trials that will guide the future management of musculoskeletal injuries.

Functional outcome and mortality in geriatric distal femoral fractures

BACKGROUND

Fragility fractures are a major health care problem worldwide. Due to the ageing population an increase of distal femoral fractures is to be expected. We studied the long-term functional outcome and their influencing factors in geriatric patients with LISS-plated distal femoral fractures.

PATIENTS AND METHODS

A cohort study with functional long-term follow up examination was carried out in a level one trauma centre on distal femoral fracture patients 65 years and older. Of 53 consecutive patients who were treated in our hospital, 43 patients with a mean age of 80 years met our inclusion criteria. 48.8% died within the study period of 5.3 years. On the remaining patients the residential status, the Barthel index and the Parker score were assessed.

RESULTS

The mean Barthel index was 47.7 and the mean Parker score was 3.5. 23% were found to be totally housebound and 26% were not able to perform any social activity. Only 18% were able to walk unaided. Patients with any medical complication had significantly higher mortality rates. Patients with extraarticular fractures had better mobility scores. Nursing home residents showed higher mortality rates but compared to patients coming from their own home the difference regarding Barthel and Parker scores remained non-significant.

CONCLUSION

This study documents the poor functional long-term outcome of geriatric patients with distal femoral fractures. In comparison to other fragility fracture patients it seems that this population is at higher risk to die in-hospital during their perioperative course. Medical complications have to be avoided as they were found to be associated with worse functional outcome and higher mortality rates. An osteoporosis therapy may be associated with reduced mortality rates also in these patients.

Highly unstable complex C3-type distal femur fracture: can double plating via a modified Olerud extensile approach be a standby solution?

Background

Multiplanar complex C3-type unstable distal femoral fractures present many challenges in terms of approach and fixation. This prospective study investigates a possible solution to these problems through double plating with autogenous bone grafting via a modified Olerud extensile approach.

Materials and methods

Twelve patients with closed C3-type injuries were included; eight of them were male, and their mean age was 33.5 years (range 22–44 years). Mechanism of injury was road traffic accident (RTA) in nine patients and fall from height in the other three cases. Eight cases were operated during the first week and four cases during the second week after injury. Mean follow-up was 13.7 months (range 11–18 months).

Results

Mean radiological healing time was 18.3 weeks (range 12-28 weeks), and all cases had good radiological healing without recorded nonunion or malunion. Clinically, two cases (16.7 %) had excellent results, five cases (41.7 %) had good results, three cases (25 %) had fair results, and two cases (16.7 %) had poor results. No cases developed skin necrosis, deep infection, bone collapse, or implant failure. However, two cases (16.7 %) had limited knee flexion to 90° and required subsequent quadricepsplasty.

Conclusions

Use of this modified highly invasive approach facilitated anatomical reconstruction of C3-type complex distal femoral fractures with lower expected complication rate and acceptable clinical outcome, especially offering good reconstruction of the suprapatellar pouch area. It can be considered as a standby solution for managing these difficult injuries.

Retrograde femoral nailing in elderly patients: outcome and functional results

Functional outcome after retrograde femoral intramedullary nailing was investigated in 35 patients older than 60 years (mean, 86 years) with 36 fractures, comprising 15 (41.7%) shaft and 21 (58.3%) distal fractures; overall, 7 (19.4%) periprosthetic fractures occured. Twenty-two (62.9%) of 35 patients were evaluated at a mean 16.5-month follow-up with the Lyshom-Gillquist score and the SF-8 questionaire. Primary union rate was 97.8%, with no significant differences in duration of surgery, bone healing, mobilization, and weight bearing among different fracture types; periprosthetic fractures revealed a significantly delayed mobilization (P=.03). Complications occured significantly more often among distal femoral fractures (P=.009), including all revision surgeries. The most frequently encountered complication was loosening of distal locking bolts (n=3). Lysholm score results were mainly influenced by age-related entities and revealed fair results in all fractures (mean in the femoral shaft fracture group, 78.1 vs mean in the distal femoral fracture group, 74.9; P=.69), except in the periprosthetic subgroup, which had good results (mean, 84.8; P=.23). This group also had increased physical parameters according to SF-8 score (P=.026). No correlation existed between SF-8 physical parameters and patient age or surgery delay, whereas a negative correlation existed between patient age and SF-8 mental parameters (P=.012). Retrograde femoral intramedullary nailing is commonly used in elderly patients due to reliable bone healing, minimal soft tissue damage, and immediate full weight bearing. It also offers a valid alternative to antegrade nailing in femoral shaft fractures.

[Distal femoral fractures]

Fractures of the distal femur still represent injuries that are difficult to treat as they either affect younger patients after a high-energy trauma with soft tissue damage and osseous comminution or elderly people with impaired local vascularity and a poor bone stock. However, exactly these fractures profit from new, biological principles of treatment, which help to diminish additional surgical trauma by indirect fracture reduction and insertion of stabilizing implants via mini-incisions. Basically, these techniques are represented by retrograde intramedullary nails and submuscularilly inserted plates/internal fixateurs. While intramedullary nails are well suited to fix extramedullary and simple articular fractures (C1), plates can also be used to treat complex articular fractures. Nevertheless, any displaced articular fracture component must still be anatomically reduced by an open approach and fixed with absolute stability. Technical advances as well as demographic changes will continue to represent challenges in the treatment of these fractures.

Primary total knee arthroplasty in the management of epiphyseal fracture around the knee

INTRODUCTION

Over the past few years the use of arthroplasty was broadened to treating complex epiphyseal fractures at the shoulder and elbow joints. Similar trends to treat this type of fractures at the knee are less documented. Based on a multicenter retrospective series study, the aims of this work is to evaluate the short term clinical results of total knee prostheses in the management of comminuted epiphyseal fractures around the knee, to identify the technical issues and fine tune the indications.

MATERIAL AND METHODS

Following the initiative of the French Hip and Knee Society (SFHG) and the Traumatology Study Group (GETRAUM), 26 charts from eight different centers in France were included in this multicenter retrospective series. Inclusion criteria were: primary total knee arthroplasty (TKA) in the management of complex articular fractures involving the proximal end of the tibia or distal end of the femur. Surgical features were identified and complications were analyzed. The assessment protocol at last follow-up was standardized and included patient demographic data, analysis of the Parker and IKS scores.

RESULTS

During the immediate postoperative period, six patients (23%) reported a general complication and four patients (15%) a local arthroplasty-related complication. At last follow-up (mean 16.2 months), the overall final Parker score was 6.3 (a mean decrease of 1.7) and the mean IKS knee score was 82 points for a mean function score of 54 points.

DISCUSSION

Primary TKA is a suitable management option for complex fractures in autonomous elderly patients suffering from knee osteoarthritis. The key technical details of this procedure should be respected and meticulously planned to achieve optimal results and limit the risk of complications. This risk in these acute complex fractures remains higher than after conventional TKA but comparable to that observed after TKA for post-traumatic arthritis.

LEVEL OF EVIDENCE

IV; retrospective cohort study.

Periarticular fractures around the hip and knee: fix or replace?

The number of periarticular fragility fractures around the hip and knee is increasing. If surgical treatment is indicated, open reduction and internal fixation or replacement can often be viable options. In contrast to secondary replacement, the use of replacement in the acute stage might be advantageous because early rehabilitation and weightbearing can be initiated. This article describes the current literature related to internal fixation or primary replacement in periarticular fractures around the hip and knee.

How useful are meta-analyses in orthopedic trauma?

BACKGROUND

Meta-analysis has become accepted as a methodically rigorous research tool, and as a result, many meta-analyses have been undertaken in orthopedic trauma, the implication being that their conclusions have improved surgeons' knowledge and facilitated improved clinical care. There have been criticisms of the methodology used in a number of meta-analyses; however, there has been no previous study of the clinical usefulness of their conclusions.

METHODS

A study of 60 orthopedic trauma meta-analyses published during or after 2000 was undertaken. We divided the conclusions of the meta-analyses into four types depending on their innovation and potential for improving clinical care. We also separated the meta-analyses according to whether they were undertaken by the Cochrane Collaboration or by independent surgeons.

RESULTS

Only 4 (6.7%) of the meta-analyses contained new, clinically useful, information, and 22 (36.7%) had no conclusions at all. A further 25 (41.7%) contained conclusions that were already in the standard orthopedic trauma literature. Approximately 70% of the Cochrane Collaborations had no conclusions.

CONCLUSIONS

We found considerable variability in the clinical usefulness of orthopedic trauma meta-analyses, and we question the clinical usefulness of this type of research.

Peri-articular fractures of the knee: an update on current issues

Peri-articular fractures of the knee in the young and elderly pose several management dilemmas. Over the last decade enormous interest has been generated in various fixation modalities, none proving to be an ideal stabilisation method. The problem is compounded by a lack of well-designed studies comparing various treatment options. In this article, the issues surrounding the diagnostic and management strategies of peri-articular fractures of the knee are discussed.