Facile synthesis of Fe-doped g-C3N4 for enhanced visible-light photocatalytic activity

Surface functionalization of two-dimensional nanomaterials beyond graphene: Applications and ecotoxicity

Two dimensional (2D) nanomaterials have emerged as promising candidates in nanotechnology due to their excellent physical, chemical, and electronic properties. However, they also pose challenges such as environmental instability and low biosafety. To address these issues, researchers have been exploring various surface functionalization methods to enhance the performance of 2D nanomaterials in practical applications. Moreover, when released into the environment, these 2D nanomaterials may interact with natural organic matter (NOM). Both intentional surface modification and unintentional environmental corona formation can alter the structure and physicochemical properties of 2D nanomaterials, potentially affecting their ecological toxicity. This review provides a comprehensive overview of covalent functionalization strategies and non-covalent interactions of 2D nanomaterials beyond graphene with organic substances, examining the resultant changes in material properties after modification. Covalent functionalization methods discussed include nucleophilic substitution reactions, addition reactions, condensation, and coordination. Non-covalent interactions are classified by substance type, covering interactions with NOM, in vivo biomolecules, and synthetic compounds. In addition, the review delves into the effects of surface functionalization on the toxicity of 2D nanomaterials to bacteria and algae. This discussion contributes to a foundational understanding for assessing the potential ecological risks associated with 2D nanomaterials.

Nanostructured MnO x /g-C3N4 for photodegradation of sulfamethoxazole under visible light irradiation

The effectiveness of g-C3N4 as photocatalyst is hindered by the rapid recombination of photo-generated electron/hole pairs. To improve its photocatalytic performance, the incorporation of g-C3N4 with co-catalysts can promote charge separation efficiency and enhance redox capabilities. In our study, a two-step approach involving calcination and solvothermal method was utilized to fabricate a proficient MnO x /g-C3N4 heterojunction photocatalyst with high photocatalytic activity. MnO x is effective at capturing holes to impede the recombination of electron/hole pairs. The MnO x /g-C3N4 composite shows a notable improvement in photocatalytic degradation of SMX, obtaining an 85% degradation rate, surpassing that of pure g-C3N4. Furthermore, the MnO x /g-C3N4 composite exhibits remarkable and enduring catalytic degradation capabilities for sulfamethoxazole (SMX), even after four consecutive reuse cycles. The intermediates produced in the MnO x /g-C3N4 system are found to be less hazardous to common aquatic creatures such as fish, daphnids, and green algae when compared to SMX. With its high tolerance, exceptional degradation ability, and minimal ecological risk, the MnO x /g-C3N4 composite emerges as a promising candidate for eliminating antibiotics from wastewater resources.

Performance, progress, and mechanism of g-C3N4-based photocatalysts in the degradation of pesticides: A systematic review

In the modern world, humans are exposed to an enormous number of pesticides discharged into the environment. Exposure to pesticides causes many health disorders, such as cancer, mental retardation, and endocrine disruption. Therefore, it is a priority to eliminate pesticides from contaminated water before discharge into aquatic environments. Conventional treatment systems do not efficiently accomplish pesticide remediation. Applying graphitic carbon nitride (g-C3N4; GCN)-based materials as highly efficient and low-cost catalysts can be one of the best methods for adequately removing pesticides. This study aims to review the most relevant studies on the use of GCN-based photocatalytic processes for degrading well-known pesticides in aqueous solutions. Thus, in the current state-of-the-art review, an overview is focused not only on how to use GCN-based photocatalysts towards the degradation of pesticides, but also discusses the impact of important operational factors like solution pH, mixture temperature, catalyst dosage, pesticide concentration, photocatalyst morphology, light intensity, reaction time, oxidant concentration, and coexisting anions. In this context, four common pesticides were reviewed, namely 2,4-dichlorophenoxyacetic acid (2,4-D), malathion (MTN), diazinon (DZN), and atrazine (ATZ). Following the screening procedure, 55 full-text papers were chosen, of which the most were published in 2023 (n = 10), and the most publications focused on the elimination of ATZ (n = 33). Among the GCN modification methods, integrating GCN with other photocatalysts showed the best performance in enhancing photocatalytic activity towards the degradation of pesticides. All GCN-based photocatalysts showed a degradation efficiency of > 90% for pesticides under optimum operating conditions. This review provides a detailed summary of different GCN modification methods to select the most promising and cost-effective photocatalyst degradation of pesticides.

A robust Fe-based heterogeneous photocatalyst for the visible-light-mediated selective reduction of an impure CO2 stream

The transformation of CO2 into value-added products from an impure CO2 stream, such as flue gas or exhaust gas, directly contributes to the principle of carbon capture and utilization (CCU). Thus, we have developed a robust iron-based heterogeneous photocatalyst that can convert the exhaust gas from the car into CO with an exceptional production rate of 145 μmol g-1 h-1. We characterized this photocatalyst by PXRD, XPS, ssNMR, EXAFS, XANES, HR-TEM, and further provided mechanistic experiments, and multi-scale/level computational studies. We have reached a clear understanding of its properties and performance that indicates that this highly robust photocatalyst could be used to design an efficient visible-light-mediated reduction strategy for the transformation of impure CO2 streams into value-added products.

High-Efficiency Photo-Fenton-like Catalyst of FeOOH/g-C3N4 for the Degradation of PNP: Characterization, Catalytic Performance and Mechanism Exploration

The composite photocatalyst FeOOH/g-C3N4 was prepared through thermal polycondensation and co-precipitation methods, followed by XRD, SEM and UV-vis characterization. The stability of FeOOH/g-C3N4 was explored by the recycling test. The active species in the reaction system were investigated by the capture experiment. The results indicated that the optimal preparation condition for g-C3N4 involved calcination at 600 °C for 4 h. XRD analysis revealed that g-C3N4 exhibits a high-purity phase, and Fe in FeOOH/g-C3N4 exists in a highly dispersed amorphous state. SEM analysis showed that FeOOH/g-C3N4 has a rough surface with an irregular layered structure. Element composition analysis confirmed that the content of elements in the prepared catalyst is consistent with the theoretical calculation. FeOOH/g-C3N4 possesses the largest specific surface area of 143.2 m2/g and a suitable pore distribution. UV-vis DRS analysis showed that the absorption intensity of FeOOH/g-C3N4 is stronger than that of g-C3N4. When the catalyst dosage was 1.0 g/L, the H2O2 dosage was 4 mmol/L, the PNP initial concentration was 10 mg/L and the initial pH value was 5, the PNP removal could reach 92% in 120 min. Even after 5 cycles, the efficiency of PNP removal by FeOOH/g-C3N4 remains nearly 80%. The capture experiment indicated that both •OH and •O2- play roles in the photocatalytic degradation of PNP, with •OH being more significant. These findings affirm that FeOOH has been successfully incorporated into g-C3N4, resulting in a conspicuous catalytic effect on the degradation of PNP in the visible light-assisted Fenton-like reaction.

Recent progresses in synthesis and modification of g-C3N4 for improving visible-light-driven photocatalytic degradation of antibiotics

Graphitic carbon nitride (g-C3N4) is a widely studied visible-light-active photocatalyst for low cost, non-toxicity, and facile synthesis. Nonetheless, its photocatalytic efficiency is below par, due to fast recombination of charge carriers, low surface area, and insufficient visible light absorption. Thus, the research on the modification of g-C3N4 targeting at enhanced photocatalytic performance has attracted extensive interest. A considerable amount of review articles have been published on the modification of g-C3N4 for applications. However, limited effort has been specially contributed to providing an overview and comparison on available modification strategies for improved photocatalytic activity of g-C3N4-based catalysts in antibiotics removal. There has been no attempt on the comparison of photocatalytic performances in antibiotics removal between modified g-C3N4 and other known catalysts. To address these, our study reviewed strategies that have been reported to modify g-C3N4, including metal/non-metal doping, defect tuning, structural engineering, heterostructure formation, etc. as well as compared their performances for antibiotics removal. The heterostructure formation was the most widely studied and promising route to modify g-C3N4 with superior activity. As compared to other known photocatalysts, the heterojunction g-C3N4 showed competitive performances in degradation of selected antibiotics. Related mechanisms were discussed, and finally, we revealed current challenges in practical application.

Synthesis of Fe-Modified g-C3N4 Nanorod Bunches for the Efficient Photocatalytic Degradation of Oxytetracycline

Antibiotic residues have been found to have potentially harmful effects on ecological and human health. Carbon nitride-based photocatalysts have widely focused on antibiotic photocatalytic degradation. Herein, we prepared Fe-modified g-C3N4 nanorod bunches (FCNBs) using chemical vapor co-deposition. Specifically, through the process of calcination, a blend of urea and chlorophyllin sodium iron salt underwent an intriguing transformation, resulting in the integration of Fe into the framework of the g-C3N4 nanorod cluster. The resulting photocatalyst exhibited remarkable stability and superior dispersibility. The prepared FCNBs had a unique structure, which was beneficial for increasing light absorption. Furthermore, the Fe species formed a chemical coordination with the g-C3N4 matrix, thereby altering the electronic structure of the matrix. This modification facilitated charge transfer, prolonged the carrier lifetime, and enhanced light absorption, all of which significantly increased the photocatalytic activity. The oxytetracycline degradation efficiency of FCNBs was 82.5%, and they demonstrated outstanding stability in cycle trials. This work introduces a promising photocatalyst for the degradation of antibiotics.

Transition metals-doped g-C3N4 nanostructures as advanced photocatalysts for energy and environmental applications

Graphitic carbon nitride (g-C3N4)-based heterostructured photocatalysts have received significant attention for its potential applications in the treatment of wastewater and hydrogen evolution. The utilization of semiconductor materials in heterogeneous photocatalysis has recently received great attention due to their potential and eco-friendly properties. Doping with metal ions plays a crucial role in altering the photochemical characteristics of g-C3N4, effectively enhancing photoabsorption into the visible range and thus improving the photocatalytic performance of doped photocatalysts. As an emerging nanomaterial, nanostructured g-C3N4 represents a visible light-active semiconducting photocatalyst that has attracted significant interest in the photocatalysis field, particularly for its practical water treatment applications. To the best of our knowledge, investigations of functionalized photocatalytic (PC) materials on 3d transition metal-doped g-C3N4 remain unexplored in the existing literature. g-C3N4 based heterohybrid photocatalysts have demonstrated excellent reusability, making them highly promising for wastewater treatment applications. This paper describes the overview of numerous studies conducted on the heterostructured g-C3N4 photocatalysts with various 3d metals. Research studies have revealed that the introduction of element doping with various 3d transition metals (e.g., Ti, Mn, Fe, Co, Ni, Cu, Zn, etc.) into g-C3N4 is an efficient approach to enhance degradation efficacy and boost photocatalytic activity (PCA) of doped g-C3N4 catalysts. Moreover, the significance of g-C3N4 heterostructured nanohybrids is highlighted, particularly in the context of wastewater treatment applications. The study concludes by providing insights into future perspectives in this developing area of research, with a specific focus on the degradation of various organic contaminants.

Methyl-terminated graphite carbon nitride with regulatable local charge redistribution for ultra-high photocatalytic hydrogen production and antibiotic degradation

Intramolecular-tailored graphite carbon nitride (g-C3N4) has great potential to greatly optimize the photo-response performance and carrier separation ability, but exquisite molecular structure engineering is still challenging. Firstly, a series of oxygen and terminal methyl moiety co-modified g-C3N4 (CNNx) has been systematically prepared by using N-Hydroxysuccinimide (HOSu) as a novel copolymerized precursor and urea. The density functional theory (DFT) calculations demonstrated that the presence of oxygen can lower the binding energy for the C-C bond to make the terminal modification easier. The terminal methyl and Oxygen not only caused abundant alveolar defects to break the periodic symmetry but also acted as an electron-accepting platform to tune the local charge redistribution within g-C3N4 molecular. The synthesized CNNx (CNN25) achieved ultra-high photocatalytic activity and chemical stability under visible light toward antibiotic degradation (99% tetracycline, 92% doxycycline, 65% ofloxacin and 74% sulfathiazole degradation within 30 min) and hydrogen production (an apparent quantum efficiency of 2.10% at 400 nm). CNN25 also maintains good efficiency in surface water and groundwater. Moreover, the TC solution treated with CNN25 had hardly any harm to the growth of E. coli. We believe our findings will provide a facile and green strategy for the preparation of non-metallic modified g-C3N4.

Fabrication of an intimately coupled photocatalysis and biofilm system for removing sulfamethoxazole from wastewater: Effectiveness, degradation pathway and microbial community analysis

Sulfamethoxazole (SMX) is an extensively applied antibiotic frequently detected in municipal wastewater, which cannot be efficiently removed by conventional biological wastewater processes. In this work, an intimately coupled photocatalysis and biodegradation (ICPB) system consisting of Fe³⁺-doped graphitic carbon nitride photocatalyst and biofilm carriers was fabricated to remove SMX. The results of wastewater treatment experiments showed that 81.2 ± 2.1% of SMX was removed in the ICPB system during the 12 h, while only 23.7 ± 4.0% was removed in the biofilm system within the same time. In the ICPB system, photocatalysis played a key role in removing SMX by producing hydroxyl radicals and superoxide radicals. Besides, the synergism between photocatalysis and biodegradation enhanced the mineralization of SMX. To understand the degradation process of SMX, nine degradation products and possible degradation pathways of SMX were analyzed. The results of high throughput sequencing showed that the diversity, abundance, and structure of the biofilm microbial community remained stable in the ICPB system at the end of the experiments, which suggested that microorganisms had accommodated to the environment of the ICPB system. This study could provide insights into the application of the ICPB system in treating antibiotic-contaminated wastewater.

Enhanced Photocatalytic H2 Evolution Performance of the Type-II FeTPPCl/Porous g-C3N4 Heterojunction: Experimental and Density Functional Theory Studies

It is of great significance to improve the photocatalytic performance of g-C3N4 by promoting its surface-active sites and engineering more suitable and stable redox couples. Herein, first of all, we fabricated porous g-C3N4 (PCN) via the sulfuric acid-assisted chemical exfoliation method. Then, we modified the porous g-C3N4 with iron(III) meso-tetraphenylporphine chloride (FeTPPCl) porphyrin via the wet-chemical method. The as-fabricated FeTPPCl-PCN composite revealed exceptional performance for photocatalytic water reduction by evolving 253.36 and 8301 μmol g-1 of H2 after visible and UV-visible irradiation for 4 h, respectively. The performance of the FeTPPCl-PCN composite is ∼2.45 and 4.75-fold improved compared to that of the pristine PCN photocatalyst under the same experimental conditions. The calculated quantum efficiencies of the FeTPPCl-PCN composite for H2 evolution at 365 and 420 nm wavelengths are 4.81 and 2.68%, respectively. This exceptional H2 evolution performance is because of improved surface-active sites due to porous architecture and remarkably improved charge carrier separation via the well-aligned type-II band heterostructure. Besides, we also reported the correct theoretical model of our catalyst through density functional theory (DFT) simulations. It is found that the hydrogen evolution reaction (HER) activity of FeTPPCl-PCN arises from the electron transfer from PCN via Cl atom(s) to Fe of the FeTPPCl, which forms a strong electrostatic interaction, leading to a decreased local work function on the surface of the catalyst. We suggest that the resultant composite would be a perfect model for the design and fabrication of high-efficiency heterostructure photocatalysts for energy applications.

Semiconductor photocatalysts: A critical review highlighting the various strategies to boost the photocatalytic performances for diverse applications

The photocatalytic technology illustrates an eco-friendly and sustainable route to overcome environmental and energy issues. The successful construction of a photocatalyst depends on four key elements: light absorption ability, the density of active sites, redox capacity, and photoinduced electron-hole recombination rate. Sincemost of intrinsic semiconductor photocatalysts cannot meet all these requirements, they are often modified to boost their photocatalytic properties. Many strategies have been adopted to design novel and efficient photocatalysts for diverse applications. Herein, we review the most efficient of these strategies and methods focused on effectively overcoming the efficiency limitations of photocatalysts to promote their large-scale application. Subsequently, a particular aim is put on the most current studies for photocatalytic applications, including CO₂ reduction, N₂ fixation, H₂ evolution, and pollutants degradation. Finally, key challenges and future perspectives in designing and implementing semiconductor photocatalysts for large-scale applications are discussed. Therefore, it is foreseen that this review will work as a guide for future research and provides a variety of strategies to develop novel and high-performance photocatalysts for various applications.

Density Functional Theory Study on the Enhancement Mechanism of the Photocatalytic Properties of the g-C3N4/BiOBr(001) Heterostructure

The van der Waals heterostructures fabricated in two semiconductors are currently attracting considerable attention in various research fields. Our study uses density functional theory calculations within the Heyd-Scuseria-Ernzerhof hybrid functional to analyze the geometric structure and electronic structure of the g-C₃N₄/BiOBr(001) heterojunction in order to gain a better understanding of its photocatalytic properties. The calculated band alignments show that g-C₃N₄/BiOBr can function as a type-II heterojunction. In this heterojunction, the electrons and holes can effectively be separated at the interface. Moreover, we find that the electronic structure and band alignment of g-C₃N₄/BiOBr(001) can be tuned using external electric fields. It is also noteworthy that the optical absorption peak in the visible region is enhanced under the action of the electric field. The electric field may even improve the optical properties of the g-C₃N₄/BiOBr(001) heterostructure. Given the results of our calculations, it seems that g-C₃N₄/BiOBr(001) may be significantly superior to visible light photocatalysis.

Semiconductors Application Forms and Doping Benefits to Wastewater Treatment: A Comparison of TiO2, WO3, and g-C3N4

Photocatalysis has been vastly applied for the removal of contaminants of emerging concern (CECs) and other micropollutants, with the aim of future water reclamation. As a process based upon photon irradiation, materials that may be activated through natural light sources are highly pursued, to facilitate their application and reduce costs. TiO2 is a reference material, and it has been greatly optimized. However, in its typical configuration, it is known to be mainly active under ultraviolet radiation. Thus, multiple alternative visible light driven (VLD) materials have been intensively studied recently. WO3 and g-C3N4 are currently attractive VLD catalysts, with WO3 possessing similarities with TiO2 as a metal oxide, allowing correlations between the knowledge regarding the reference catalyst, and g-C3N4 having an interesting and distinct non-metallic polymeric structure with the benefit of easy production. In this review, recent developments towards CECs degradation in TiO2 based photocatalysis are discussed, as reference catalyst, alongside the selected alternative materials, WO3 and g-C3N4. The aim here is to evaluate the different techniques more commonly explored to enhance catalyst photo-activity, specifically doping with multiple elements and the formation of composite materials. Moreover, the possible combination of photocatalysis and ozonation is also explored, as a promising route to potentialize their individual efficiencies and overcome typical drawbacks.

Degradation of Organic Dyes Using the Ionizing Irradiation Process in the Presence of the CN/CD3/Fe6 Composite: Mechanistic Studies

Organic dyes are ubiquitous pollutants in various aquatic environments as they are produced in abundance and used widely. In the present work, the degradation and mineralization of various organic dyes such as methylene blue (MB), methyl orange (MO), and rhodamine B (RhB), following the electron beam irradiation method in the presence of a graphitic carbon nitride/carbon nanodots/Fe(II) (CN/CD3/Fe6) composite, were studied. The removal efficiency of MB reached 81.7% under conditions of electron beam irradiation (EBI) when the total irradiation dose was 5 kGy. This increased to 91.2% in the presence of the CN/CD3/Fe6 composite. The mineralization efficiency increased from 30.1 to 47.3% when the composite was added, and the total irradiation dose was 20 kGy. The removal efficiency of organic dyes was not significantly affected in the pH range of 3-11. Results from cyclic experiments conducted using MB degradation indicated that the CN/CD3/Fe6 composite exhibited good stability and reusability even after five irradiation cycles. Results from scavenging experiments revealed that •OH was the predominant reactive species during the MB degradation process. Intermediates produced in the synergistic system (EBI&CN/CD3/Fe6 system) consisting of the CN/CD3/Fe6 composite and EBI were detected using the liquid chromatography-mass spectrometry (LC-MS) technique. Based on the results, the possible degradation mechanism and pathways for MB were proposed.

Intimately coupled photocatalysis and biodegradation for effective simultaneous removal of sulfamethoxazole and COD from synthetic domestic wastewater

The inefficiency of conventional biological treatment for removing sulfamethoxazole (SMX) is posing potential risks to ecological environments. In this study, an intimately coupled photocatalysis and biodegradation (ICPB) system consisting of Fe³⁺/g-C₃N₄ and biofilm was fabricated for the treatment of synthetic domestic wastewater containing SMX. The results showed that this ICPB system could simultaneously remove 96.27 ± 5.27% of SMX and 86.57 ± 3.06% of COD, which was superior to sole photocatalysis (SMX 100%, COD 4.2 ± 0.74%) and sole biodegradation (SMX 42.21 ± 0.86%, COD 95.1 ± 0.18%). Contributors to SMX removal in the ICPB system from big to small include LED photocatalysis, biodegradation, LED photolysis, and adsorption effect of the carrier, while COD removal was largely ascribed to biodegradation. Increasing initial SMX concentration inhibits SMX removal rate, while increasing photocatalyst dosage accelerates SMX removal rate, and both had no impact on COD removal. Our analysis of biofilm activity showed that microorganisms in this ICPB system maintained a high survival rate and metabolic activity, and the microbial community structure of the biofilm remained stable, with Nakamurella and Raoultella being the two dominant genera of the biofilm. This work provides a new strategy to effectively treat domestic wastewater polluted by antibiotics.

Recent advancements of g-C3N4-based magnetic photocatalysts towards the degradation of organic pollutants: a review

Heterogeneous photocatalysis premised on advanced oxidation processes has witnessed a broad application perspective, including water purification and environmental remediation. In particular, the graphitic carbon nitride (g-C₃N₄), an earth-abundant metal-free conjugated polymer, has acquired extensive application scope and interdisciplinary consideration owing to its outstanding structural and physicochemical properties. However, several issues such as the high recombination rate of the photo-generated electron-hole pairs, smaller specific surface area, and lower electrical conductivity curtail the catalytic efficacy of bulk g-C₃N₄. Another challenging task is separating the catalyst from the reaction medium, limiting their reusability and practical applications. Therefore, several methodologies are adopted strategically to tackle these issues. Attention is being paid, especially to the magnetic nanocomposites (NCs) based catalysts to enhance efficiency and proficient reusability property. This review summarizes the latest progress related to the design and development of magnetic g-C₃N₄-based NCs and their utilization in photocatalytic systems. The usefulness of the semiconductor heterojunctions on the catalytic activity, working mechanism, and degradation of pollutants are discussed in detail. The major challenges and prospects of using magnetic g-C₃N₄-based NCs for photocatalytic applications are highlighted in this report.

Element-doped graphitic carbon nitride: confirmation of doped elements and applications

Doping is widely reported as an efficient strategy to enhance the performance of graphitic carbon nitride (g-CN). In the study of element-doped g-CN, the characterization of doped elements is an indispensable requirement, as well as a huge challenge. In this review, we summarize some useful characterization methods which can confirm the existence and chemical states of doped elements. The advantages and shortcomings of these characterization methods are discussed in detail. Various applications of element-doped g-CN and the function of doped elements are also introduced. Overall, this review article aims to provide helpful information for the research of element-doped g-CN.

Synergetic polarization effect of protonation and Fe-doping on g-C3N4 with enhanced photocatalytic activity

The local polarization electric field resulting from protonation and Fe-doping in g-C3N4 can be formed, thus highly facilitating the separation and transport of charge carriers and boosting the photocatalytic activity.

Photoelectrochemical Studies on Metal-Doped Graphitic Carbon Nitride Nanostructures under Visible-Light Illumination

Recently, the engineering of optical bandgaps and morphological properties of graphitic carbon nitride (g-C3N4) has attracted significant research attention for photoelectrodes and environmental remediation owing to its low-cost synthesis, availability of raw materials, and thermal physical–chemical stability. However, the photoelectrochemical activity of g-C3N4-based photoelectrodes is considerably poor due to their high electron–hole recombination rate, poor conductivity, low quantum efficiency, and active catalytic sites. Synthesized Ni metal-doped g-C3N4 nanostructures can improve the light absorption property and considerably increase the electron–hole separation and charge transfer kinetics, thereby initiating exceptionally enhanced photoelectrochemical activity under visible-light irradiation. In the present study, Ni dopant material was found to evince a significant effect on the structural, morphological, and optical properties of g-C3N4 nanostructures. The optical bandgap of the synthesized photoelectrodes was varied from 2.53 to 2.18 eV with increasing Ni dopant concentration. The optimized 0.4 mol% Ni-doped g-C3N4 photoelectrode showed a noticeably improved six-fold photocurrent density compared to pure g-C3N4. The significant improvement in photoanode performance is attributable to the synergistic effects of enriched light absorption, enhanced charge transfer kinetics, photoelectrode/aqueous electrolyte interface, and additional active catalytic sites for photoelectrochemical activity.

Fe-Doped g-C3N4: High-Performance Photocatalysts in Rhodamine B Decomposition

Herein, Fe-doped C3N4 high-performance photocatalysts, synthesized by a facile and cost effective heat stirring method, were investigated systematically using powder X-ray diffraction (XRD), Fourier transform infrared (FTIR), scanning electron microscopy (SEM) and Brunauer-Emmett-Teller (BET) surface area measurement, X-ray photoelectron (XPS), UV-Vis diffusion reflectance (DRS) and photoluminescence (PL) spectroscopy. The results showed that Fe ions incorporated into a g-C3N4 nanosheet in both +3 and +2 oxidation states and in interstitial configuration. Absorption edge shifted slightly toward the red light along with an increase of absorbance in the wavelength range of 430-570 nm. Specific surface area increased with the incorporation of Fe into g-C3N4 lattice, reaching the highest value at the sample doped with 7 mol% Fe (FeCN7). A sharp decrease in PL intensity with increasing Fe content is an indirect evidence showing that electron-hole pair recombination rate decreased. Interestingly, Fe-doped g-C3N4 nanosheets present a superior photocatalytic activity compared to pure g-C3N4 in decomposing RhB solution. FeCN7 sample exhibits the highest photocatalytic efficiency, decomposing almost completely RhB 10 ppm solution after 30 min of xenon lamp illumination with a reaction rate approximately ten times greater than that of pure g-C3N4 nanosheet. This is in an agreement with the BET measurement and photoluminescence result which shows that FeCN7 possesses the largest specific surface area and low electron-hole recombination rate. The mechanism of photocatalytic enhancement is mainly explained through the charge transfer processes related to Fe2+/Fe3+ impurity in g-C3N4 crystal lattice.