Biocompatible fabrication of TiO2 nanoparticles: Antimicrobial, anticoagulant, antiplatelet, direct hemolytic and cytotoxicity properties

Glutathione - IR 797 coupled Casein Nano-Trojan for augmenting the therapeutic efficacy of camptothecin in highly invasive triple negative breast cancer

The rapid metastasis & heterogenic constitution of triple negative breast cancer (TNBC) limits drug entry to the tumor, reducing treatment effectiveness. To address this, we have synthesized Casein nanoparticles (Cn NPs) with attached glutathione (GSH), a natural ligand for cancer cell overexpressed γ-glutamyl transpeptidase (GGT). Cn NPs encapsulated with Camptothecin and NIR dye IR 797 (CCN NPs) for combinatorial therapy of TNBC. The GSH-CCN nanoparticles (CCNG NPs) act as a Nano-Trojan to deceive the cancer cells by delivering therapeutic payloads directly to specific target cells. In this study, Casein Nano-Trojan is equipped with GSH as a targeting ligand for GGT. The binding of CCNG NPs with cell surface receptors switched the anionic charge to catanionic, prompting the target cell to engulf the nanoparticles. The Casein Nano-Trojan releases its therapeutic payload inside the target cell, potentially inhibiting proliferation & inducing a high percentage of cell death (85 ± 7 %). Disintegration of mitochondrial membrane potential, inhibition of both migration & re-growth were observed. Immunofluorescence, acridine orange/ethidium bromide stain, and nuclear fragmentation assay further confirmed the substantial DNA damage induced by the high expression of γH2AX and p53. Significant therapeutic efficacy was observed in the 3D spheroids of 4T1 cells and in vivo breast cancer mice model (BALB/c). These findings demonstrate that CCNG NPs could be an effective treatment approach for highly metastatic triple negative breast cancer.

Biocompatibility Evaluation of TiO2, Fe3O4, and TiO2/Fe3O4 Nanomaterials: Insights into Potential Toxic Effects in Erythrocytes and HepG2 Cells

Nanomaterials such as titanium dioxide and magnetite are increasingly used in several fields, such as water remediation and agriculture. However, this has raised environmental concerns due to potential exposure to organisms like humans. Nanomaterials can cause adverse interactions depending on physicochemical characteristics, like size, morphology, and composition, when interacting with living beings. To ensure safe use and prevent the risk of exposure to nanomaterials, their biocompatibility must be assessed. In vitro cell cultures are beneficial for assessing nanomaterial-cell interactions due to their easy handling. The present study evaluated the biocompatibility of TiO2, Fe3O4, and TiO2/Fe3O4 nanomaterials thermally treated at 350 °C and 450 °C in erythrocytes and HepG2 cells. According to the hemolysis experiments, non-thermally treated NMs are toxic (>5% hemolysis), but their thermally treated counterparts do not present toxicity (<2%). This behavior indicates that the toxicity derives from some precursor (solvent or surfactant) used in the synthesis of the nanomaterials. All the thermally treated nanomaterials did not show hemolytic activity under different conditions, such as low-light exposure or the absence of blood plasma proteins. In contrast, non-thermally treated nanomaterials showed a high hemolytic behavior, which was reduced after the purification (washing and thermal treatment) of nanomaterials, indicating the presence of surfactant residue used during synthesis. An MTS cell viability assay shows that calcined nanomaterials do not reduce cell viability (>11%) during 24 h of exposure. On the other hand, a lactate dehydrogenase leakage assay resulted in a higher variability, indicating that several nanomaterials did not cause an increase in cell death as compared to the control. However, a holotomographic microscopy analysis reveals a high accumulation of nanomaterials in the cell structure at a low concentration (10 µg mL-1), altering cell morphology, which could lead to cell membrane damage and cell viability reduction.

Antiplatelet, cytotoxic activities and characterization of green-synthesized zinc oxide nanoparticles using aqueous extract of Nephrolepis exaltata

The goal of the current study was to synthesize zinc oxide nanoparticles (ZnO-NPs) using ZnCl₂.2H₂O salt precursor and an aqueous extract of Nephrolepis exaltata (N. exaltata), which act as a capping and reducing agent. N. exaltata plant extract-mediated ZnO-NPs were further characterized by various techniques, such as X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transforms infrared spectroscopy (FT-IR), UV-visible (UV-Vis), and energy-dispersive X-ray (EDX) analysis. The nanoscale crystalline phase of ZnO-NPs was analyzed by the XRD patterns. The FT-IR analysis revealed different functional groups of biomolecules involved in the reduction and stabilization of the ZnO-NPs. The light absorption and optical properties of ZnO-NPs were examined by UV-Vis spectroscopy at a wavelength of 380 nm. The spherical shape morphology of ZnO-NPs with mean particle size ranges between 60 and 80 nm was confirmed by SEM images. While the EDX analysis was used to identify the elemental composition of ZnO-NPs. Furthermore, the synthesized ZnO-NPs demonstrate potential antiplatelet activity by inhibiting the platelet aggregation induced by platelet activation factor (PAF) and arachidonic acid (AA). The results showed that synthesized ZnO-NPs were more effective in inhibiting platelet aggregation induced by AA with IC₅₀ (56% and 10 μg/mL) and PAF (63% and 10 μg/mL), respectively. However, the biocompatibility of ZnO-NPs was assessed in human lung cancer cell line (A549) under in vitro conditions. The cytotoxicity of synthesized nanoparticles revealed that cell viability decreased and the IC₅₀ was found to be 46.7% at a concentration of 75 μg/mL. The present work concluded the green synthesis of ZnO-NPs that was achieved by N. exaltata plant extract and showed good antiplatelet and cytotoxic activity, which demonstrates the lack of harmful effects making them more effective for use in pharmaceutical and medical fields to treat thrombotic disorders.

Decanoic acid-palmitic acid/SiO2@TiO2 phase change microcapsules based on RBF model with excellent photocatalysis performance and humidity control property

The decanoic acid-palmitic acid composite phase change material compounds with SiO₂ and TiO₂ to prepare decanoic acid-palmitic acid/SiO₂@TiO₂ phase change microcapsules (D-P-SiO₂@TiO₂ PCM). The D-P-SiO₂@TiO₂ PCM could show efficient temperature regulation, remove pollutants through photocatalysis, and control air humidity. However, it is difficult to obtain the best experimental scheme directly using the traditional experimental setup due to the complicated photocatalytic-humidity performance. The radial basis function (RBF) model optimized the uniform experimental design parameters, and the D-P-SiO₂@TiO₂ PCM showed enhanced photocatalytic-humidity performance. The RBF-calculated preparation parameters were as follows: the molar ratio of decanoic acid-palmitic acid to tetraethyl silicate was 0.42, pH was 1.83, the molar ratio of deionized water to tetraethyl silicate was 98.15, while the molar rate of tetrabutyl titanate to tetraethyl silicate was 0.76. The degradation rate of gaseous formaldehyde by the RBF-optimized D-P-SiO₂@TiO₂ PCM was 69.57% after 6 h, and the moisture content was between 0.0923 and 0.0940 g·g^-1 at 43.16-75.29% relative humidity (RH). The comparison between model optimization and the experiment sample prepared using the optimized parameters showed that the theoretical photocatalytic-humidity performance target value was 2.0502, and the tested target value was 2.0757. The error calculated from these two values was only 1.24%, and both were better than the best value of uniform experimental calculation. RBF mathematical model was proved to be an effective, convenient, and economic-saving method to simulate and predict D-P-SiO₂@TiO₂ PCM experimental design parameters. SEM and TEM analyses of the RBF-optimized D-P-SiO₂@TiO₂ PCM showed a uniform spherical structure, and the particle size analysis analyses was about 200 nm. The DSC analysis showed the phase transition temperature range was between 16.97 and 28.94 °C, within the comfort range of the human body. The UV-Vis investigations showed the absorption edge of the RBF-optimized D-P-SiO₂@TiO₂ PCM was 380 nm, in line with the band gap structure of the TiO₂ anatase phase. The thermogravimetric investigations showed that this composite was stable at normal temperature and pressure. After a 100 times hot-cold cycle, the quality of the RBF-optimized D-P-SiO₂@TiO₂ PCM maintained its stability, as the photocatalytic-humidity performance was almost the same. The N₂-adsorption analysis showed it had a high specific surface area and irregular pore structures, which could help it regulate air humidity. Considering these results, the D-P-SiO₂@TiO₂ PCM, a new ecological functional material, would be used in the construction industry to improve the architectural ecological environment.

A Review of the Use of Metallic Nanoparticles as a Novel Approach for Overcoming the Stability Challenges of Blood Products: A Narrative Review from 2011-2021

PURPOSE

To obtain safe and qualified blood products (e.g., platelets, plasma, and red blood cells), various limitations such as limited shelf life (especially for platelets) and stability must be addressed. In this review study, the most commonly used metal nanomaterials (e.g., gold, silver, iron, and magnetic) reported in the literature from 2011 to 2021 were discussed owing to their unique properties, which provide exciting approaches to overcome these limitations and improve the stability, safety, and quality of blood products. Novelty: This study reviews for the first time the results of studies (from 2011 to 2021) that consider the effects of various metallic nanoparticles on the different blood products.

RESULTS

The results of this review study showed that some metallic nanoparticles are effective in improving the stability of plasma proteins. For this purpose, modified Fe₃O₄ magnetic nanoparticles and citrate-AuNPs protect albumin products against stressful situations. Also, SiO₂ microspheres and silicacoated magnetite nanoparticles are highly capable of improving IgG stability. ZnO nanoparticles also reduced thrombin production, and protein-coated GMNP nanoparticles prevented unwanted leakage of factor VIII through blood vessels. Furthermore, the stability and longevity of erythrocytes can be improved by AuNP nanoparticles and Zr-based organic nanoparticles. In addition, platelet storage time can be improved using PEGylated Au and functionalized iron oxide nanoparticles.

SUGGESTION

According to the results of this study, it is suggested that further research should be conducted on metal nanoparticles as the most promising candidates to prepare metal nanoparticles with improved properties to increase the stability of various blood products.

Functional bioinspired nanocomposites for anticancer activity with generation of reactive oxygen species

Cancer is a debilitating and deadly disease caused by the uncontrolled growth of aberrant cell populations. This disease cannot always be controlled with traditional therapies and medicines. Different medicines are being used for this purpose, however these medicines have their side effects and are harmful to healthy cells. A better way to cure cancer disease is by limiting the agglomeration of cancer cells, minimizing their growth and their population by destroying these harmful cells. This could be achieved by controlling the function of mitochondria and DNA in cancer cells with the use of biocompatible materials with tuneable physical properties. Accordingly, research is ongoing as to the use of nanomaterials and nanotechnology in medicine. Zinc oxide semiconductor nanoparticles have displayed good anticancer behaviour. They have unique properties such as biocompatibility, good stability, and are environmentally friendly. Owing to these characteristics, they are focused on biological applications such as drug delivery and cancer therapy. In the present research work, zinc oxide, titanium dioxide nanoparticles and titanium oxide-zinc oxide nanocomposites were successfully trailed for anti-cancer activity. Pure zinc oxide nanoparticles (ZnO NPs), titanium dioxide nanoparticles (TiO₂ NPs) and their nanocomposites (TiO₂+ZnO NPs) were prepared by the co-precipitation technique. The structural properties were investigated by X-ray diffraction, which confirmed the Wurtzite structure of pure ZnO NPs. The morphology of the NPs was checked by scanning electron microscopy. For incident light having a higher energy band gap of nanomaterials, the electrons are excited to the conduction band and these electrons generate reactive oxygen species (ROS). The efficacy of these nanomaterials was checked by exposing the NPs to the human liver cancer cell HepG2. The MTT assay describes anticancer activity via cell viability. The cell viability of composites was observed to be greater than pure ZnO NPs. Their results showed that the structure of ZnO NPs remains the same with composites of TiO₂ NPs, but the band gap of the composite was intermediate for individual samples. It also showed that the anticancer activity of composites was also less than pure ZnO NPs which is due to the reduction of ROS generation. This is observed that nanocomposites of ZnO and TiO₂ could be effective in the development of a treatment of human liver cancer cells.

Synthesis of AgNPs from leaf extract of Naringi crenulata and evaluation of its antibacterial activity against multidrug resistant bacteria

The biosynthesis of AgNPs using a methanolic extract of Naringi crenulata is described in this study. UV-visible spectroscopy, X-ray diffraction (XRD), Energy dispersive X-ray spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR), particle size analyzer (PSA), scanning electron microscope (SEM), atomic force microscopy (AFM), and transmission electron microscopy (TEM) were used to characterize the synthesized AgNPs. The UV-visible spectrum revealed a sharp peak at 420 nm, which represents silver's strong Plasmon resonance. FTIR and XRD confirmed the functional groups (N-H stretch, alkanes, O-H stretch, carboxylic acid, N-H bend, C-X fluoride, and C-N stretch) and face-centered cubic crystalline structure of synthesized AgNPs. SEM and TEM analyses revealed that the synthesized nanoparticles had a spherical morphology with an average diameter of 32.75 nm. The synthesized AgNPs have antibacterial activity against multidrug-resistant bacteria pathogens such as Vibrio cholerae, Staphylococcus aureus, Streptococcus pyogenes, Escherichia coli, and Klebsiella pneumoniae. AgNPs can be synthesized using a methanolic extract of Naringi crenulate, and the resulting particle may have wide range of biological applications.

Micro and Nano Interdigitated Electrode Array (IDEA)-Based MEMS/NEMS as Electrochemical Transducers: A Review

Micro and nano interdigitated electrode array (µ/n-IDEA) configurations are prominent working electrodes in the fabrication of electrochemical sensors/biosensors, as their design benefits sensor achievement. This paper reviews µ/n-IDEA as working electrodes in four-electrode electrochemical sensors in terms of two-dimensional (2D) planar IDEA and three-dimensional (3D) IDEA configurations using carbon or metal as the starting materials. In this regard, the enhancement of IDEAs-based biosensors focuses on controlling the width and gap measurements between the adjacent fingers and increases the IDEA's height. Several distinctive methods used to expand the surface area of 3D IDEAs, such as a unique 3D IDEA design, integration of mesh, microchannel, vertically aligned carbon nanotubes (VACNT), and nanoparticles, are demonstrated and discussed. More notably, the conventional four-electrode system, consisting of reference and counter electrodes will be compared to the highly novel two-electrode system that adopts IDEA's shape. Compared to the 2D planar IDEA, the expansion of the surface area in 3D IDEAs demonstrated significant changes in the performance of electrochemical sensors. Furthermore, the challenges faced by current IDEAs-based electrochemical biosensors and their potential solutions for future directions are presented herein.

Medical and Dental Applications of Titania Nanoparticles: An Overview

Currently, titanium oxide (TiO₂) nanoparticles are successfully employed in human food, drugs, cosmetics, advanced medicine, and dentistry because of their non-cytotoxic, non-allergic, and bio-compatible nature when used in direct close contact with the human body. These NPs are the most versatile oxides as a result of their acceptable chemical stability, lower cost, strong oxidation properties, high refractive index, and enhanced aesthetics. These NPs are fabricated by conventional (physical and chemical) methods and the latest biological methods (biological, green, and biological derivatives), with their advantages and disadvantages in this epoch. The significance of TiO₂ NPs as a medical material includes drug delivery release, cancer therapy, orthopedic implants, biosensors, instruments, and devices, whereas their significance as a dental biomaterial involves dentifrices, oral antibacterial disinfectants, whitening agents, and adhesives. In addition, TiO₂ NPs play an important role in orthodontics (wires and brackets), endodontics (sealers and obturating materials), maxillofacial surgeries (implants and bone plates), prosthodontics (veneers, crowns, bridges, and acrylic resin dentures), and restorative dentistry (GIC and composites).

Combination of Paraconiothyrium brasiliense fabricated titanium dioxide nanoparticle and antibiotics enhanced antibacterial and antibiofilm properties: A toxicity evaluation

Antimicrobial resistance (AMR) causes global consequences through increased mortality and economic loss. Antimicrobial drugs including nanomaterials are an emerging environmental impact. Hence, this work aimed to synthesize and characterize the titanium dioxide nanoparticles (TiO₂ NPs) using the aqueous extract of endophytic fungus Paraconiothyrium brasiliense (Pb) for enhancing the antibacterial efficiency of existing standard antibiotics at minimum concentration. The FTIR and XRD results confirmed the capping of functional molecules and the crystalline nature of Pb-TiO2 NPs. The spherical-shaped TiO2 NPs with the size of 57.39 ± 13.65 nm were found in TEM analysis. The average hydrodynamic size (68.43 ± 1.49 d. nm) and the zeta potential (-19.6 ± 1.49 mV) was confirmed the stability of Pb-TiO2 NPs. Antibacterial studies revealed that bare Pb-TiO2 NPs (20 μg/mL) did not exhibit significant antibacterial activity while combination of TCH + Pb-TiO2 NPs considerably increased the inhibition of E. coli biofilm evidenced by CLSM and SEM analysis. Further, Pb-TiO₂ NPs (100 μg/mL) were found to be moderately toxic to cell line (NIH3T3), red blood cells (RBC), and egg embryos. Hence, this study concluded that <50 μg/mL of TiO₂ NPs can be mixed with antibiotics for enhanced antibacterial application thereby minimizing the AMR and the environmental toxicity.

Mahmoud E, Elansary HO, Sannaningaiah D. Effect of Biofunctional Green Synthesized MgO-Nanoparticles on Oxidative-Stress-Induced Tissue Damage and Thrombosis

The present study describes the green biofunctional synthesis of magnesium oxide (MgO) nanoparticles using the aqueous Tarenna asiatica fruit extract. The characterization of Tarenna asiatica fruit extract MgO nanoparticles (TAFEMgO NPs) was achieved by X-ray powder diffraction, UV-Vis spectroscopy, FTIR, TEM, SEM, and energy-dispersive X-ray diffraction. TAFEMgO NPs scavenged the DPPH free radicals with an IC50 value of 55.95 μg/μL, and it was highly significant compared to the standard. To authenticate the observed antioxidant potential of TAFEMgO NPs, oxidative stress was induced in red blood cells (RBC) using sodium nitrite (NaNO₂). Interestingly, TAFEMgO NPs ameliorated the RBC damage from oxidative stress by significantly restoring the stress parameters, such as the protein carbonyl content (PCC), lipid peroxidation (LPO), total thiol (TT), super-oxide dismutase (SOD), and catalase (CAT). Furthermore, oxidative stress was induced in-vivo in Sprague Dawley female rats using diclofenac (DFC). TAFEMgO NPs normalized the stress parameters in-vivo and minimized the oxidative damage in tissues. Most importantly, TAFEMgO NPs restored the function and architecture of the damaged livers, kidneys, and small intestines by regulating biochemical parameters. TAFEMgO NPs exhibited an anticoagulant effect by increasing the clotting time from 193 s in the control to 885 s in the platelet rich plasma. TAFEMgO NPs prolonged the formation of the clot process in the activated partial thromboplastin time and the prothrombin time, suggest the effective involvement in both intrinsic and extrinsic clotting pathways of the blood coagulation cascade. TAFEMgO NPs inhibited adenosine di-phosphate (ADP)-induced platelet aggregation. TAFEMgO NPs did not show hemolytic, hemorrhagic, and edema-inducing properties at the tested concentration of 100 mg/kgbody weight, suggesting its non-toxic property. In conclusion, TAFEMgO NPs mitigates the sodium nitrite (NaNO₂)- and diclofenac (DFC)-induced stress due to oxidative damage in both in vitro and in vivo experimental models.

A Comprehensive Study on the Synthesis and Characterization of TiO2 Nanoparticles Using Aloe vera Plant Extract and Their Photocatalytic Activity against MB Dye

This paper investigates the use of A. vera extract as a natural capping agent for TiO2 nanoparticles as well as a reducing agent for TiO2 nanoparticles. XRD, ultraviolet diffuse reflectance (UV-DRS), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy-dispersive X-ray analysis (EDXA) were used to characterize the material. In their X-ray diffraction patterns, the titanium dioxide nanoparticles were found to have a high degree of crystallinity, indicating that they were synthesized. Infrared (FT-IR) spectra were used to determine the chemical composition of the plant extract. The DRS spectra in the UV-visible range reveal a high absorption peak at 356 nm, which indicates the existence of TiO2 nanoparticles in the sample. Shape of nanoparticles was revealed by SEM and TEM morphological investigations, which revealed their irregular and somewhat spherical nature. Only titanium and oxygen compounds were found in the EDX spectrum, indicating that they were present. This demonstrates that the NPs that were produced are devoid of contaminants. Using the produced nanoparticles as catalyst, we presented a photocatalytic degradation method for the dye methylene blue in this paper. The findings showed that 94 percent of the damage occurred within 120 minutes of being exposed to UV radiation.

Titanium Dioxide: Structure, Impact, and Toxicity

Titanium dioxide, first manufactured a century ago, is significant in industry due to its chemical inertness, low cost, and availability. The white mineral has a wide range of applications in photocatalysis, in the pharmaceutical industry, and in food processing sectors. Its practical uses stem from its dual feature to act as both a semiconductor and light scatterer. Optical performance is therefore of relevance in understanding how titanium dioxide impacts these industries. Recent breakthroughs are summarised herein, focusing on whether restructuring the surface properties of titanium dioxide either enhances or inhibits its reactivity, depending on the required application. Its recent exposure as a potential carcinogen to humans has been linked to controversies around titanium dioxide's toxicity; this is discussed by illustrating discrepancies between experimental protocols of toxicity assays and their results. In all, it is important to review the latest achievements in fast-growing industries where titanium dioxide prevails, while keeping in mind insights into its disputed toxicity.

Synthesis and Characterization of TiO2-Water Nanofluids

Nanofluids made of TiO2 and multiwalled carbon nanotubes are the focus of our study. Using TiO2 and water as the basic fluids, nanofluids were created in 100 : 0, 75 : 25, and 50 : 50 proportions. Carbon nanotubes (CNTs) were disseminated into these base fluids of three types at 0.125, 0.25, and 0.5 percentages. Over the course of two months, the change of zeta potential is monitored to assess the stability of the dispersion. XRD analysis and SEM and TEM analysis are carried out for TiO2 nanofluids. Nanoparticles were analyzed using EDAX analysis to identify their composition. SEM examination was used to investigate the morphology for TiO2 nanoparticles. Particles of TiO2 produced in this manner seemed to have an average diameter of 27 nm. Nanofluids have a poor stability, which is the most important aspect of employing them, although most studies did not focus on this. When it comes to nanofluids, this study is unique in that it provides an in-depth look of surface modification approaches that have been employed by researchers to address these issues, as well as an evaluation of their stability over two months. Solubility is improved by acid treatment of CNTs, which results in functional groups on the surface of CNTs.

Formulation and Characterization of Poly (Ethylene Glycol)-Coated Core-Shell Methionine Magnetic Nanoparticles as a Carrier for Naproxen Delivery: Growth Inhibition of Cancer Cells

Simple Summary

Naproxen was loaded onto a magnetic nanoparticle coated with polyethylene glycol. Magnetic nanoparticles (MNPs) were used in this study to develop a smart naproxen delivery system. One of the most potent COX-1 and COX-2 inhibitors is naproxen, which belongs to the NSAID family of drugs. Although this drug has a short half-life, it has considerable toxicities and side effects on gastrointestinal tissues. The significant potential of our proposed nanocarrier for biomedical applications has been widely recognized; we modified MNPs to attach to this drug via disulfide bonds, promote the selective release of naproxen in inflammatory cells, and prevent adverse effects on the digestive system. It was found that the cytotoxicity of the drug was lowered by this change, which prevented unspecific protein binding.

Abstract

An efficient and selective drug delivery vehicle for cancer cells can remarkably improve therapeutic approaches. In this study, we focused on the synthesis and characterization of magnetic Ni_1−xCo_xFe₂O₄ nanoparticles (NPs) coated with two layers of methionine and polyethylene glycol to increase the loading capacity and lower toxicity to serve as an efficient drug carrier. Ni_1−xCo_xFe₂O₄@Methionine@PEG NPs were synthesized by a reflux method then characterized by FTIR, XRD, FESEM, TEM, and VSM. Naproxen was used as a model drug and its loading and release in the vehicles were evaluated. The results for loading efficiency showed 1 mg of Ni_1−xCo_xFe₂O₄@Methionine@PEG NPs could load 0.51 mg of the naproxen. Interestingly, Ni_1−xCo_xFe₂O₄@Methionine@PEG showed a gradual release of the drug, achieving a time-release up to 5 days, and demonstrated that a pH 5 release of the drug was about 20% higher than Ni_1−xCo_xFe₂O₄@Methionine NPs, which could enhance the intracellular drug release following endocytosis. At pH 7.4, the release of the drug was slower than Ni_1−xCo_xFe₂O₄@Methionine NPs; demonstrating the potential to minimize the adverse effects of anticancer drugs on normal tissues. Moreover, naproxen loaded onto the Ni_1−xCo_xFe₂O₄@Methionine@PEG NPs for breast cancer cell lines MDA-MB-231 and MCF-7 showed more significant cell death than the free drug, which was measured by an MTT assay. When comparing both cancer cells, we demonstrated that naproxen loaded onto the Ni_1−xCo_xFe₂O₄@Methionine@PEG NPs exhibited greater cell death effects on the MCF-7 cells compared with the MDA-MB-231 cells. The results of the hemolysis test also showed good hemocompatibility. The results indicated that the prepared magnetic nanocarrier could be suitable for controlled anticancer drug delivery.

Influence of nanoparticles on the haemostatic balance: between thrombosis and haemorrhage

Maintenance of a delicate haemostatic balance or a balance between clotting and bleeding is critical to human health. Irrespective of administration route, nanoparticles can reach the bloodstream and might interrupt the haemostatic balance by interfering with one or more components of the coagulation, anticoagulation, and fibrinolytic systems, which potentially lead to thrombosis or haemorrhage. However, inadequate understanding of their effects on the haemostatic balance, along with the fact that most studies mainly focus on the functionality of nanoparticles while forgetting or leaving behind their risk to the body's haemostatic balance, is a major concern. Hence, our review aims to provide a comprehensive depiction of nanoparticle-haemostatic balance interactions, which has not yet been covered. The synergistic roles of cells and plasma factors participating in haemostatic balance are presented. Possible interactions and interference of each type of nanoparticle with the haemostatic balance are comprehensively discussed, particularly focusing on the underlying mechanisms. Interactions of nanoparticles with innate immunity potentially linked to haemostasis are mentioned. Various physicochemical characteristics that influence the nanoparticle-haemostatic balance are detailed. Challenges and future directions are also proposed. This insight would be valuable for the establishment of nanoparticles that can either avoid unintended interference with the haemostatic balance or purposely downregulate/upregulate its key components in a controlled manner.

Extraction–Pyrolytic Method for TiO2 Polymorphs Production

The unique properties and numerous applications of nanocrystalline titanium dioxide (TiO2) are stimulating research on improving the existing and developing new titanium dioxide synthesis methods. In this work, we demonstrate for the first time the possibilities of the extraction–pyrolytic method (EPM) for the production of nanocrystalline TiO2 powders. A titanium-containing precursor (extract) was prepared by liquid–liquid extraction using valeric acid C4H9COOH without diluent as an extractant. Simultaneous thermogravimetric analysis and differential scanning calorimetry (TGA–DSC), as well as the Fourier-transform infrared (FTIR) spectroscopy were used to determine the temperature conditions to fabricate TiO2 powders free of organic impurities. The produced materials were also characterized by X-ray diffraction (XRD) analysis and transmission electron microscopy (TEM). The results showed the possibility of the fabrication of storage-stable liquid titanium (IV)-containing precursor, which provided nanocrystalline TiO2 powders. It was established that the EPM permits the production of both monophase (anatase polymorph or rutile polymorph) and biphase (mixed anatase–rutile polymorphs), impurity-free nanocrystalline TiO2 powders. For comparison, TiO2 powders were also produced by the precipitation method. The results presented in this study could serve as a solid basis for further developing the EPM for the cheap and simple production of nanocrystalline TiO2-based materials in the form of doped nanocrystalline powders, thin films, and composite materials.