3D bioprinting of nanoparticle-laden hydrogel scaffolds with enhanced antibacterial and imaging properties

IPN nanocomposite scaffolds based on GelMA-alginate with modified super-paramagnetic iron oxide for cartilage tissue engineering

Repairing articular cartilage defects remains a significant challenge due to the avascular nature of the tissue, which impedes cartilage regeneration. Gelatin-based hydrogels, including gelatin methacryloyl (GelMA) and alginate, are widely used in tissue engineering for their favorable biological properties. However, their mechanical strength frequently falls short. This study examines the influence of superparamagnetic iron oxide nanoparticles (SPIONs) at concentrations of 0.5 %, 0.75 %, and 1 % on the properties of an interpenetrating polymeric network (IPN) comprising GelMA and sodium alginate (SA). The hydrogels were analyzed for their physicomechanical properties, rheological behavior, and biological responses, including fibroblast cell adhesion (L929) and MTT assay results. The presence of SPIONs significantly decreased swelling and degradation by 66 % and 28 %, respectively. Furthermore, the compressive strength, modulus, and shear-thinning behavior improved by 63 %, 61 %, and 57 %, respectively. No cytotoxicity was observed, and cell proliferation was favorable under a magnetic field. The MRI results validated the efficacy of SPIONs as a T2 contrast agent. Notably, the GelMA/SA hydrogel containing 0.75 % SPIONs exhibited optimal mechanical properties, highlighting its potential as a biomaterial for cartilage tissue engineering.

Bifunctional sheets reduce the microbe and endotoxin contamination of tissue-derived collagen

Tendon-derived type I collagen is an essential biomaterial for various biomedical devices due to its inherent bioactivity and favorable environment for cells. Correspondingly, microbial and endotoxin contamination can be easily introduced during the collagen extraction process, which is generally overlooked in fundamental scientific research, especially the endotoxin residue. Conventional approaches for mitigating endotoxin exhibit limited effectiveness when applied to biomacromolecule products because of viscosity, clogging, and diminished bioactivity. In this study, we developed a bifunctional sheet that can simultaneously reduce the microbe and endotoxin contamination in collagen solution by co-incubation and subsequent magnetic separation, avoiding the issues of blockage and bioactivity impairment. The bifunctional sheet was successfully fabricated by modifying the magnetic graphene oxide with histamine. Collagen products treated by sheets exhibited reduced microbial and endotoxin contamination while maintaining their bioactivity for encapsulated cell growth. Additionally, inflammatory stimulation of collagen was decreased in vitro and in vivo after treatment. This work may present a facile approach for diminishing microbe and endotoxin residues in collagen products in basic research, obviating the non-essential use of a sterile workshop and facilitating the development of tissue-derived collagen research.

Pentamidine inhibition of streptopain attenuates Streptococcus pyogenes virulence

The obligate human pathogen Group A Streptococcus (GAS; Streptococcus pyogenes) carries high morbidity and mortality, primarily in impoverished or resource-poor regions. The failure rate of monotherapy with conventional antibiotics is high, and invasive infections by this bacterium frequently require extensive supportive care and surgical intervention. Thus, it is important to find new compounds with adjunctive therapeutic benefits. The conserved secreted protease streptopain (Streptococcal pyrogenic exotoxin B; SpeB) directly contributes to disease pathogenesis by inducing pathological inflammation, degrading tissue, and promoting the evasion of antimicrobial host defense proteins. This study screened 400 diverse off-patent drug and drug-like compounds for inhibitors of streptopain proteolysis. Lead compounds were tested for activity at lower concentrations and anti-virulence activities during in vitro infection. Significant inhibition of streptopain was seen for pentamidine, an anti-protozoal drug approved for the treatment of pneumocystis pneumonia, leishmaniasis, and trypanosomiasis. Streptopain inhibition rendered GAS susceptible to killing by human innate immune cells. These studies identify unexploited molecules as new starting points for drug discovery and a potential for repurposing existing drugs for the treatment of infections by GAS.

A 3D bioprinted adhesive tissue engineering scaffold to repair ischemic heart injury

Adhesive tissue engineering scaffold (ATES) devices can be secured on tissues by relying on their intrinsic adhesive properties, hence, avoiding the complications such as host tissue/scaffold damage that are associated with conventional scaffold fixation methods like suturing or bioglue. This study introduces a new generation of three-dimensional (3D) bioprinted ATES systems for use as cardiac patches to regenerate the adult human heart. Tyramine-modified methacrylated hyaluronic acid (HAMA-tyr), gelatin methacrylate (GelMA), and gelatin were used to create the hybrid bioink formulation with self-adhesive properties. ATESs were bioprinted and further modified to improve the adhesion properties. In-depth characterization of printing fidelity, pore size, mechanical properties, swelling behavior, as well as biocompatibility was used to create ATESs with optimal biological function. Following in vitro testing, the ATESs were tested in a mouse model of myocardial infarction to study the scaffold adhesive strength in biological milieu. The method developed in this study can be used to manufacture off-the-shelf ATESs with complex cellular and extracellular architecture, with robust potential for clinical translation into a variety of personalized tissue engineering and regenerative medicine applications.

Advancements in GelMA bioactive hydrogels: Strategies for infection control and bone tissue regeneration

Infectious bone defects present a significant clinical challenge, characterized by infection, inflammation, and subsequent bone tissue destruction. Traditional treatments, including antibiotic therapy, surgical debridement, and bone grafting, often fail to address these defects effectively. However, recent advancements in biomaterials research have introduced innovative solutions for managing infectious bone defects. GelMA, a three-dimensional network of hydrophilic polymers that can absorb and retain substantial amounts of water, has attracted considerable attention in the fields of materials science and biomedical engineering. Its distinctive properties, such as biocompatibility, responsiveness to stimuli, and customisable mechanical characteristics make GelMA an exemplary scaffold material for bone tissue engineering. This review aims to thoroughly explore the current literature on antibacterial and osteogenic strategies using GelMA hydrogels for the restoration of infected bones. It discusses their fabrication methods, biocompatibility, antibacterial effectiveness, and bioactivity. We conclude by discussing the existing challenges and future research directions in this field, with the hope of inspiring further innovations in the synthesis, modification, and application of GelMA-based hydrogels for infection control and bone tissue regeneration.

Protocol for 3D bioprinting of nanoparticle-laden hydrogels to enhance antibacterial and imaging properties

This protocol describes the preparation of a nanoparticle-encapsulated bioink capable of protecting tissue-engineered constructs against bacterial infections while also providing contrast for magnetic resonance (MR) imaging modalities. The report includes details of preparing the methacrylated gelatin-based bioinks and the incorporation of superparamagnetic iron oxide nanoparticles. A detailed protocol is presented for characterizing the bioink, evaluating cell response, and assessing its antibacterial effect. Overall, this article presents a robust approach for the development of antibacterial, MR-visible bioinks suitable for various tissue engineering applications. For complete details on the use and execution of this protocol, please refer to Theus et al.1.

3D Bioprinting in Limb Salvage Surgery

With the development of 3D bioprinting and the creation of innovative biocompatible materials, several new approaches have brought advantages to patients and surgical teams. Increasingly more bone defects are now treated using 3D-bioprinted prostheses and implementing new solutions relies on the ability of engineers and medical teams to identify methods of anchoring 3D-printed prostheses and to reveal the potential influence of bioactive materials on surrounding tissues. In this paper, we described why limb salvage surgery based on 3D bioprinting is a reliable and effective alternative to amputations, and why this approach is considered the new standard in modern medicine. The preliminary results of 3D bioprinting in one of the most challenging fields in surgery are promising for the future of machine-based medicine, but also for the possibility of replacing various parts from the human body with bioactive-based constructs. In addition, besides the materials and constructs that are already tested and applied in the human body, we also reviewed bioactive materials undergoing in vitro or in vivo testing with great potential for human applications in the near future. Also, we explored the recent advancements in clinically available 3D-bioprinted constructs and their relevance in this field.

Microcomputed Tomography for the Microstructure Evaluation of 3D Bioprinted Scaffolds

This study implemented the application of microcomputed tomography (micro-CT) as a characterization technique for the study and investigation of the microstructure of 3D scaffold structures produced via three-dimensional bioprinting (3DBP). The study focused on the preparation, characterization, and cytotoxicity analysis of gold nanoparticles (Au-NPs) incorporated into 3DBP hydrogels for micro-CT evaluation. The Au-NPs were characterized by using various techniques, including UV-vis spectrometry, dynamic light scattering (DLS), zeta potential measurement, and transmission electron microscopy (TEM). The characterization results confirmed the successful coating of the Au-NPs with 2 kDa methoxy-PEG and revealed their spherical shape with a mean core diameter of 66 nm. Cytotoxicity analysis using live-dead fluorescent microscopy indicated that all tested Au-NP solutions were nontoxic to AC16 cardiomyocytes in both 2D and 3D culture conditions. Scanning electron microscopy (SEM) showed distinguishable differences in image contrast and intensity between samples with and without Au-NPs, with high concentrations of Au-NPs displaying nanoparticle aggregates. Micro-CT imaging demonstrated that scaffolds containing Au-NPs depicted enhanced imaging resolution and quality, allowing for visualization of the microstructure. The 3D reconstruction of scaffold structures from micro-CT imaging using Dragonfly software further supported the improved visualization. Mechanical analysis revealed that the addition of Au-NPs enhanced the mechanical properties of acellular scaffolds, including their elastic moduli and complex viscosity, but the presence of cells led to biodegradation and reduced mechanical strength. These findings highlight the successful preparation and characterization of Au-NPs, their nontoxic nature in both 2D and 3D culture conditions, their influence on imaging quality, and the impact on the mechanical properties of 3D-printed hydrogels. These results contribute to the development of functional and biocompatible materials for tissue engineering and regenerative medicine applications.

FSTL-1 loaded 3D bioprinted vascular patch regenerates the ischemic heart tissue

Cardiac patch strategies are developed as a promising approach to regenerate the injured heart after myocardial infarction (MI). This study integrated 3D bioprinting and cardioprotective paracrine signaling to fabricate vascular patch devices containing endothelial cells (ECs) and the regenerative follistatin-like 1 (FSTL1) peptide. Engineered patch supported the 3D culture of ECs in both static and dynamic culture, forming a uniform endothelium on the printed channels. Implantation of vascular patch onto a rat model of acute MI resulted in significant reduction of scar formation, left ventricle dilation, and wall thinning, as well as enhanced ejection fraction. Furthermore, increased vascularization and proliferation of cardiomyocytes were observed in hearts treated with patches. These findings highlight the remarkable capacity of 3D bioprinted vascular patch to augment the endogenous regenerative capacity of mammalian heart, together with the exogenous cardioprotective function, to serve as a robust therapeutic device to treat acute MI.

In vitro models for studying implant-associated biofilms - A review from the perspective of bioengineering 3D microenvironments

Biofilm research has grown exponentially over the last decades, arguably due to their contribution to hospital acquired infections when they form on foreign body surfaces such as catheters and implants. Yet, translation of the knowledge acquired in the laboratory to the clinic has been slow and/or often it is not attempted by research teams to walk the talk of what is defined as 'bench to bedside'. We therefore reviewed the biofilm literature to better understand this gap. Our search revealed substantial development with respect to adapting surfaces and media used in models to mimic the clinical settings, however many of the in vitro models were too simplistic, often discounting the composition and properties of the host microenvironment and overlooking the biofilm-implant-host interactions. Failure to capture the physiological growth conditions of biofilms in vivo results in major differences between lab-grown- and clinically-relevant biofilms, particularly with respect to phenotypic profiles, virulence, and antimicrobial resistance, and they essentially impede bench-to-bedside translatability. In this review, we describe the complexity of the biological processes at the biofilm-implant-host interfaces, discuss the prerequisite for the development and characterization of biofilm models that better mimic the clinical scenario, and propose an interdisciplinary outlook of how to bioengineer biofilms in vitro by converging tissue engineering concepts and tools.

A comprehensive review on the biomedical frontiers of nanowire applications

This comprehensive review examines the immense capacity of nanowires, nanostructures characterized by unbounded dimensions, to profoundly transform the field of biomedicine. Nanowires, which are created by combining several materials using techniques such as electrospinning and vapor deposition, possess distinct mechanical, optical, and electrical properties. As a result, they are well-suited for use in nanoscale electronic devices, drug delivery systems, chemical sensors, and other applications. The utilization of techniques such as the vapor-liquid-solid (VLS) approach and template-assisted approaches enables the achievement of precision in synthesis. This precision allows for the customization of characteristics, which in turn enables the capability of intracellular sensing and accurate drug administration. Nanowires exhibit potential in biomedical imaging, neural interfacing, and tissue engineering, despite obstacles related to biocompatibility and scalable manufacturing. They possess multifunctional capabilities that have the potential to greatly influence the intersection of nanotechnology and healthcare. Surmounting present obstacles has the potential to unleash the complete capabilities of nanowires, leading to significant improvements in diagnostics, biosensing, regenerative medicine, and next-generation point-of-care medicines.

Heterogeneous and Composite Bioinks for 3D-Bioprinting of Complex Tissue

Bioink composition is a key consideration for the 3D-bioprinting of complex and stable structures used to model tissues and as tissue constructs for regenerative medicine. An emerging and industrially important area of research is the use of micro- and nanofillers to improve bioink performance without dramatically altering the physicochemical properties of the polymeric material that forms the bulk of the printed structure. The purpose of this review is to provide a comprehensive overview of emerging nanomaterial fillers designed to create heterogeneous and composite bioinks for 3D-bioprinting of complex functional tissues. We outline the criteria that must be considered when developing such a bioink and discuss applications where the fillers impart stimuli responsiveness, e.g., when exposed to magnetic fields, electrical fields, and light. We further highlight how the use of such fillers can enable non-destructive imaging to monitor scaffold placement and integrity following implantation.

Tracheal Tissue Engineering: Principles and State of the Art

Patients affected by long-segment tracheal defects or stenoses represent an unsolved surgical issue, since they cannot be treated with the conventional surgery of tracheal resection and consequent anastomosis. Hence, different strategies for tracheal replacement have been proposed (synthetic materials, aortic allografts, transplantation, autologous tissue composites, and tissue engineering), each with advantages and drawbacks. Tracheal tissue engineering, on the other hand, aims at recreating a fully functional tracheal substitute, without the need for the patient to receive lifelong immunosuppression or endotracheal stents. Tissue engineering approaches involve the use of a scaffold, stem cells, and humoral signals. This paper reviews the main aspects of tracheal TE, starting from the choice of the scaffold to the type of stem cells that can be used to seed the scaffold, the methods for their culture and expansion, the issue of graft revascularization at the moment of in vivo implantation, and experimental models of tracheal research. Moreover, a critical insight on the state of the art of tracheal tissue engineering is also presented.

Application of tissue engineering techniques in tracheal repair: a bibliometric study

Transplantation of tissue-engineered trachea is an effective treatment for long-segment tracheal injury. This technology avoids problems associated with a lack of donor resources and immune rejection, generating an artificial trachea with good biocompatibility. To our knowledge, a systematic summary of basic and clinical research on tissue-engineered trachea in the last 20 years has not been conducted. Here, we analyzed the development trends of tissue-engineered trachea research by bibliometric means and outlined the future perspectives in this field. The Web of Science portal was selected as the data source. CiteSpace, VOSviewer, and the Bibliometric Online Analysis Platform were used to analyze the number of publications, journals, countries, institutions, authors, and keywords from 475 screened studies. Between 2000 and 2023, the number of published studies on tissue-engineered trachea has been increasing. Biomaterials published the largest number of papers. The United States and China have made the largest contributions to this field. University College London published the highest number of studies, and the most productive researcher was an Italian scholar, Paolo Macchiarini. However, close collaborations between various researchers and institutions from different countries were generally lacking. Despite this, keyword analysis showed that manufacturing methods for tracheal stents, hydrogel materials, and 3D bioprinting technology are current popular research topics. Our bibliometric study will help scientists in this field gain an in-depth understanding of the current research progress and development trends to guide their future work, and researchers in related fields will benefit from the introduction to transplantation methods of tissue-engineered trachea.

Leveraging 3D Bioprinting and Photon-Counting Computed Tomography to Enable Noninvasive Quantitative Tracking of Multifunctional Tissue Engineered Constructs

3D bioprinting is revolutionizing the fields of personalized and precision medicine by enabling the manufacturing of bioartificial implants that recapitulate the structural and functional characteristics of native tissues. However, the lack of quantitative and noninvasive techniques to longitudinally track the function of implants has hampered clinical applications of bioprinted scaffolds. In this study, multimaterial 3D bioprinting, engineered nanoparticles (NPs), and spectral photon-counting computed tomography (PCCT) technologies are integrated for the aim of developing a new precision medicine approach to custom-engineer scaffolds with traceability. Multiple CT-visible hydrogel-based bioinks, containing distinct molecular (iodine and gadolinium) and NP (iodine-loaded liposome, gold, methacrylated gold (AuMA), and Gd2 O3 ) contrast agents, are used to bioprint scaffolds with varying geometries at adequate fidelity levels. In vitro release studies, together with printing fidelity, mechanical, and biocompatibility tests identified AuMA and Gd2 O3 NPs as optimal reagents to track bioprinted constructs. Spectral PCCT imaging of scaffolds in vitro and subcutaneous implants in mice enabled noninvasive material discrimination and contrast agent quantification. Together, these results establish a novel theranostic platform with high precision, tunability, throughput, and reproducibility and open new prospects for a broad range of applications in the field of precision and personalized regenerative medicine.