A novel salt bridge mechanism highlights the need for nonmobile proton conditions to promote disulfide bond cleavage in protonated peptides under low-energy collisional activation

Impact of Trisulfide on the Structure and Function of Different Antibody Constructs

Trisulfide is a post-translational modification (PTM) commonly found in recombinant antibodies. It has been demonstrated that trisulfide had no impact on the bioactivity of mono-specific antibodies (MsAbs). However, the impact of trisulfide on multi-specific antibodies has not been evaluated. In this study, two mass spectrometric methods were developed for comprehensive trisulfide characterization. The non-reduced peptide mapping method combined with the unique electron activated dissociation (EAD) provided signature fragments for confident trisulfide identification as well as trisulfide quantitation at individual sites. A higher throughput method using Fab mass analysis was also developed and qualified to support routine monitoring of trisulfide during process development. Fab mass analysis features simpler sample preparation and shorter analysis time but provides comparable results to the non-reduced peptide mapping method. In this study, a bi-specific (BsAb) and a tri-specific antibody (TsAb) were compared side-by-side with a MsAb to evaluate the impact of trisulfide on the structure and function of multi-specific antibodies. Results indicated that trisulfide dominantly formed at similar locations across different antibody constructs and had no impact on the size heterogeneity, charge heterogeneity, or bioactivities of any assessed antibodies. Together with the in vitro stability under heat stress (25 °C and 40 °C for up to four weeks) and rapid conversion from trisulfide to disulfide during in vivo circulation, trisulfide could be categorized as a non-critical quality attribute (non-CQA) for antibody products.

Top-down mass spectrometry and assigning internal fragments for determining disulfide bond positions in proteins

Disulfide bonds in proteins have a substantial impact on protein structure, stability, and biological activity. Localizing disulfide bonds is critical for understanding protein folding and higher-order structure. Conventional top-down mass spectrometry (TD-MS), where only terminal fragments are assigned for disulfide-intact proteins, can access disulfide information, but suffers from low fragmentation efficiency, thereby limiting sequence coverage. Here, we show that assigning internal fragments generated from TD-MS enhances the sequence coverage of disulfide-intact proteins by 20-60% by returning information from the interior of the protein sequence, which cannot be obtained by terminal fragments alone. The inclusion of internal fragments can extend the sequence information of disulfide-intact proteins to near complete sequence coverage. Importantly, the enhanced sequence information that arise from the assignment of internal fragments can be used to determine the relative position of disulfide bonds and the exact disulfide connectivity between cysteines. The data presented here demonstrates the benefits of incorporating internal fragment analysis into the TD-MS workflow for analyzing disulfide-intact proteins, which would be valuable for characterizing biotherapeutic proteins such as monoclonal antibodies and antibody-drug conjugates.

Investigation of Product Ions Generated by 193 nm Ultraviolet Photodissociation of Peptides and Proteins Containing Disulfide Bonds

Disulfide bridges are unique post-translational modifications (PTM) that contribute to protein architecture and modulate function. This PTM, however, challenges top-down mass spectrometry by cyclizing stretches of the protein sequence. In order to produce and release detectable product ions that contribute to the assignment of proteoforms, regions of a protein encapsulated by disulfide bonds require two fragmentation events: cleavage of the protein backbone and cleavage of the disulfide bond. Traditional collisional activation methods do not cleave disulfide bonds efficiently, often leading to low sequence coverage of proteins that incorporate this feature. To address this challenge, we have evaluated the fragmentation pathways enabled by 193 nm ultraviolet photodissociation (UVPD) and UVPD coupled to electron transfer dissociation for the characterization of protein structures incorporating disulfide bonds. Cleavage of disulfide bonds by either approach results in S-S and C-S dissociation products that result from a combination of homolytic cleavage and hydrogen-transfer processes. Characterization of these product ions elevates interpretation of complex top-down spectra of proteins that incorporate disulfide bonds.

Rapid Disulfide Mapping in Peptides and Proteins by meta-Chloroperoxybenzoic Acid (mCPBA) Oxidation and Tandem Mass Spectrometry

Disulfide bonds are a class of important post-translational modifications that play important roles in modulating the structures and functions of proteins. Therefore, the mapping of disulfide linkages in peptides and proteins is indispensable for complete structure characterization and functional studies. As disulfide bonds in protonated ions do not dissociate readily under low-energy collision-induced dissociation (CID), they are usually chemically cleaved or activated prior to mass spectrometry (MS) or tandem MS (MS/MS) analysis. In this study, we report a new method that allows the mapping of disulfide linkages in peptides and proteins through meta-chloroperoxybenzoic acid (mCPBA)-based disulfide oxidation and MS/MS. Upon oxidation, the disulfide bond is converted to a thiosulfinate group, i.e., S(═O)-S, in a rapid (>60% yield in 1 min) and highly specific approach in an aqueous phase. The thiosulfinate group is then preferentially cleaved by MS/MS. For interchain disulfide linkages, this leads to a facile peptide chain separation and the identification of disulfide-linked peptides. For intrachain disulfide linkages, collisional activation of the thiosulfinate leads to disulfide cleavage and fragmentation of the peptide backbone constrained by the disulfide loop, enabling a near-complete peptide sequencing. The mCPBA oxidation-based disulfide mapping strategy can be readily integrated with bottom-up or top-down protein analysis for comprehensive protein structure elucidation, e.g., digested lysozyme and intact human insulin.

Comprehensive Analysis of Tryptic Peptides Arising from Disulfide Linkages in NISTmAb and Their Use for Developing a Mass Spectral Library

This work presents methods for identifying and then creating a mass spectral library for disulfide-linked peptides originating from the NISTmAb, a reference material of the humanized IgG1k monoclonal antibody (RM 8671). Analyses involved both partially reduced and non-reduced samples under neutral and weakly basic conditions followed by nanoflow liquid chromatography tandem mass spectrometry (LC–MS/MS). Spectra of peptides containing disulfide bonds are identified by both MS1 ion and MS2 fragment ion data in order to completely map all the disulfide linkages in the NISTmAb. This led to the detection of 383 distinct disulfide-linked peptide ions, arising from fully tryptic cleavage, missed cleavage, irregular cleavage, complex Met/Trp oxidation mixtures, and metal adducts. Fragmentation features of disulfide bonds under low-energy collision dissociation were examined. These include (1) peptide bond cleavage leaving disulfide bonds intact; (2) disulfide bond cleavage, often leading to extensive fragmentation; and (3) double cleavage products resulting from breakages of two peptide bonds or both peptide and disulfide bonds. Automated annotation of various complex MS/MS fragments enabled the identification of disulfide-linked peptides with high confidence. Peptides containing each of the nine native disulfide bonds were identified along with 86 additional disulfide linkages arising from disulfide bond shuffling. The presence of shuffled disulfides was nearly completely abrogated by refining digest conditions. A curated spectral library of 702 disulfide-linked peptide spectra was created from this analysis and is publicly available for free download. Since all IgG1 antibodies have the same constant regions, the resulting library can be used as a tool for facile identification of “hard-to-find” disulfide-bonded peptides. Moreover, we show that one may identify such peptides originating from IgG1 proteins in human serum, thereby serving as a means of monitoring the completeness of protein reduction in proteomics studies. Data are available via ProteomeXchange with identifier PXD023358.

Mapping Complex Disulfide Bonds via Implementing Photochemical Reduction Online with Liquid Chromatography-Mass Spectrometry

Assigning disulfide linkage is a crucial task for protein identification. The current bottom-up proteomics workflow has limitations in characterizing peptide digests containing multiple disulfide bonds due to the difficulty of controlling partial reduction via conventional chemical reduction methods. Previously, our lab reported the development of an acetone/2-propanol (IPA) photoinitiating system for rapid (on second time scale) and tunable disulfide bond reduction. Herein, we incorporated this reaction system onto a liquid chromatography-mass spectrometry (LC-MS) system for bottom-up protein analysis applications. The photochemical reduction reaction was implemented in a flow microreactor which allowed for up to 15 s 254 nm UV irradiation. The microreactor was installed post LC separation and right before electrospray ionization, while a T-junction was used to introduce the photoinitiating solution to the LC eluent before entering the microreactor. The degree of disulfide reduction was tunable from partial reduction to complete reduction for peptides containing one or multiple disulfide bonds. Significantly improved sequence coverage was obtained from complete disulfide reduction, while assignment of the disulfide connectivity was facilitated from partial disulfide reduction when coupled with tandem mass spectrometry via collision-induced dissociation. As a proof-of-concept test, trypsin digests of lysozyme (four disulfide bonds) and bovine serum albumin (BSA, 17 disulfide bonds) were analyzed by the LC-MS system coupled with online reduction. Sequence coverage was improved from 35% to 100% and 13% to 87% for lysozyme and BSA, respectively. All four disulfide bonds of lysozyme were determined. For BSA, nine disulfide bonds were characterized and eight adjacent disulfide bonds were narrowed down.

Comprehensive Workflow for Mapping Disulfide Linkages Including Free Thiols and Error Checking by On-Line UV-Induced Precolumn Reduction and Spiked Control

Mapping highly complicated disulfide linkages and free thiols via liquid chromatography-tandem mass spectrometry (LC-MS²) is challenging because of the difficulties in optimizing sample preparation to acquire critical MS data and detecting mispairings. Herein, we report a highly efficient and comprehensive workflow using an on-line UV-induced precolumn reduction tandem mass spectrometry (UV-LC-MS²) coupled with two-stage data analysis and spiked control. UV-LC-MS² features a gradient run of acetonitrile containing a tunable percentage of photoinitiators (acetone/alcohol) that drives the sample to the MS through a UV-flow cell and reverse phase column to separate UV-induced products for subsequent fragmentation via low energy collision-induced dissociation. This allowed the alkylated thiol-containing and UV-reduced cysteine-containing peptides to be identified by a nontargeted database search. Expected or unexpected disulfide/thiol mapping was then carried out based on the search results, and data were derived from partially reduced species by photochemical reaction. Complete assignments of native and scrambled disulfide linkages of insulin, α-lactalbumin, and bovine serum albumin (BSA) as well as the free C34-BSA were demonstrated using none or single enzyme digestion. This workflow was applied to characterize unknown disulfide/thiol patterns of the recombinant cyclophilin 1 monomer (rTvCyP1 mono) from the human pathogen Trichomonas vaginalis. α-Lactalbumin was judiciously chosen as a spiked control to minimize mispairings due to sample preparation. rTvCyP1 was determined to contain a high percentage of thiol (>80%). The rest of rTvCyP1 mono were identified to contain two disulfide/thiol patterns, of which C41-C169 linkage was confirmed to exist as C53-C181 in rTvCyP2, a homologue of rTvCyP1. This platform identifies heterogeneous protein disulfide/thiol patterns in a de-novo fashion with artifact control, opening up an opportunity to characterize crude proteins for many applications.

Mapping a Conformational Epitope of Hemagglutinin A Using Native Mass Spectrometry and Ultraviolet Photodissociation

As the importance of effective vaccines and the role of protein therapeutics in the drug industry continue to expand, alternative strategies to characterize protein complexes are needed. Mass spectrometry (MS) in conjunction with enzymatic digestion or chemical probes has been widely used for mapping binding epitopes at the molecular level. However, advances in instrumentation and application of activation methods capable of accessing higher energy dissociation pathways have recently allowed direct analysis of protein complexes. Here we demonstrate a workflow utilizing native MS and ultraviolet photodissociation (UVPD) to map the antigenic determinants of a model antibody-antigen complex involving hemagglutinin (HA), the primary immunogenic antigen of the influenza virus, and the D1 H1-17/H3-14 antibody which has been shown to confer potent protection to lethal infection in mice despite lacking neutralization activity. Comparison of sequence coverages upon UV photoactivation of HA and of the HA·antibody complex indicates the elimination of some sequence ions that originate from backbone cleavages exclusively along the putative epitope regions of HA in the presence of the antibody. Mapping the number of sequence ions covering the HA antigen versus the HA·antibody complex highlights regions with suppressed backbone cleavage and allows elucidation of unknown epitopes. Moreover, examining the observed fragment ion types generated by UVPD demonstrates a loss in diversity exclusively along the antigenic determinants upon MS/MS of the antibody-antigen complex. UVPD-MS shows promise as a method to rapidly map epitope regions along antibody-antigen complexes as novel antibodies are discovered or developed.

Top-Down Analysis of Disulfide-Linked Proteins Using Photoinduced Radical Reactions and ET-DDC

Top-down characterization of proteins via tandem mass spectrometry (MS/MS) can be challenging due to the presence of multiple disulfide bond linkages; which significantly inhibit the backbone cleavage efficiency for the formation of structurally informative fragment ions. In this study, we present a strategy of pairing a solution-phase photoinitiating system with dipolar direct current induced collisional activation of electron transfer products (ET-DDC) of proteins for a top-down MS/MS approach. The photoinitiating system allows for a rapid scission of all the disulfide linkages in the protein (on the time scale of seconds) with high efficiency (near to complete reduction); while ET-DDC collisional activation improves the fragmentation efficiency for the protein via broadband activation of all the first-generation charge reduced precursor ions (e.g., electron transfer no-dissociation or ETnoD products) from electron transfer reactions over a wide mass-to-charge range. As a result, this approach enabled the generation of extensive sequence informative fragment ion yields for a rapid and enhanced structural characterization of disulfide-linked proteins.

Characterization of Protein Disulfide Linkages by MS In-Source Dissociation Comparing to CID and ETD Tandem MS

Direct characterization of disulfide linkages in proteins by mass spectrometry has been challenging. Here, we report analysis of disulfide linkages in insulin variant, endothelin 3, and relaxin 2 by in-source dissociation (ISD) during LC-MS. A duplet insulin peptide from Glu-C digestion that contains peptides p1 and p2 (from chains A and B, respectively) was selected as a model peptide. This duplet peptide has an inter-chain disulfide bond between p1 and p2, and an intra-chain disulfide bond in p1. To compare the gas-phase fragmentation, it was subjected to ISD MS and MS/MS methods, including collision-induced dissociation (CID) and electron transfer dissociation (ETD). The pattern and efficiency of peptide backbone and disulfide cleavage varied with these dissociation methods. ETD, CID, and ISD were able to generate single backbone, double backbone, and triple (double backbone and single disulfide bond) cleavages in this model peptide, respectively. Specifically, CID did not cleave disulfide bonds and ETD was able to only cleave the inter-chain disulfide bond at low efficiency, limiting their usage in this disulfide analysis. In contrast, ISD was able to cleave the intra-chain disulfide bond in addition to peptide backbone, creating multiple fragment ions that allow accurate assignment of both intra- and inter-chain disulfide linkages. ISD was also successfully applied to determine double disulfide linkages in endothelin 3 and relaxin 2 peptides. This study contributes to the fundamental understanding of disulfide bond cleavages in different gas-phase fragmentations and provides an efficient cleavage strategy for identification of disulfide bonds in proteins by ISD ESI-MS. Graphical Abstract.

Gas-Phase Fragmentation Reactions of Protonated Cystine using High-Resolution Tandem Mass Spectrometry

Cystine is an important biomolecule in living systems. Although collision-induced dissociation (CID)-based tandem mass spectrometry (MS/MS) is commonly applied for identification and quantification of cystine in both biomedical and nutritional studies, gas-phase fragmentation reactions of cystine in CID has remained unclear. This may lead to improper assay design, which may in turn result in inaccurate test results. In the present study, gas-phase fragmentation reactions of protonated cystine in CID were characterized using high-resolution MS/MS and pseudo MS³. Fragmentations started from cleavages of disulfide bond (S⁻S) and carbon⁻sulfur bond (C⁻S). When cleaving at the S⁻S, protonated cysteine was generated as one of the predominant fragmentation products. Minor fragmentations started from the loss of H₂O + CO and the loss of NH₃. Our results reveal that the m/z 74 fragment ion, which is commonly used as a product ion of the transition (precursor/product ion pair) in selected reaction monitoring (SRM) assay for quantifying cystine, comprises two isobaric fragments originating from different parts of cystine. This indicates the need for careful selection of a stable isotope-labeled cystine molecule as an internal standard for SRM assays. Here, we provide a clear picture of the fragmentation reactions of protonated cystine in CID. It can serve as a useful guidance for designing MS/MS-based assays for cystine testing.

Acetone/Isopropanol Photoinitiating System Enables Tunable Disulfide Reduction and Disulfide Mapping via Tandem Mass Spectrometry

Herein, we report the development of a new photochemical system which enables rapid and tunable disulfide bond reduction and its application in disulfide mapping via online coupling with mass spectrometry (MS). Acetone, a clean and electrospray ionization (ESI) compatible solvent, is used as the photoinitiator (1% volume) in the solvent system consisting of 1:1 alkyl alcohol and water. Under ultraviolet (UV) irradiation (∼254 nm), the acetone/alcohol system produces hydroxyalkyl radicals, which are responsible for disulfide bond cleavage in peptides. Acetone/isopropanol is most suitable for optimizing the disulfide reduction products, leading to almost complete conversion in less than 5 s when the reaction is conducted in a flow microreactor. The flow microreactor device not only facilitates direct coupling with ESI-MS but also allows fine-tuning of the extent of disulfide reduction by varying the UV exposure time. Near full sequence coverage for peptides consisting of intra- or interchain disulfide bonds has been achieved from complete disulfide reduction and online tandem mass spectrometry (MS/MS) via low energy collision-induced dissociation. Coupling different degrees of partial disulfide reduction with ESI-MS/MS allows disulfide mapping as demonstrated for characterizing the three disulfide bonds in insulin.

Characterization of Disulfide Linkages in Proteins by 193 nm Ultraviolet Photodissociation (UVPD) Mass Spectrometry

Deciphering disulfide bond patterns in proteins remains a significant challenge. In the present study, interlinked disulfide bonds connecting peptide chains are homolytically cleaved with 193 nm ultraviolet photodissociation (UVPD). Analysis of insulin showcased the ability of UVPD to cleave multiple disulfide bonds and provide sequence coverage of the peptide chains in the same MS/MS event. For proteins containing more complex disulfide bonding patterns, an approach combining partial reduction and alkylation mitigated disulfide scrambling and allowed assignment of the array of disulfide bonds. The 4 disulfide bonds of lysozyme and the 19 disulfide bonds of serotransferrin were characterized through LC/UVPD-MS analysis of nonreduced and partially reduced protein digests.

Assigning Peptide Disulfide Linkage Pattern Among Regio-Isomers via Methoxy Addition to Disulfide and Tandem Mass Spectrometry

Pinpointing disulfide linkage pattern is critical in the characterization of proteins and peptides consisting of multiple disulfide bonds. Herein, we report a method based on coupling online disulfide modification and tandem mass spectrometry (MS/MS) to distinguish peptide disulfide regio-isomers. Such a method relies on a new disulfide bond cleavage reaction in solution, involving methanol as a reactant and 254 nm ultraviolet (UV) irradiation. This reaction leads to selective cleavage of a disulfide bond and formation of sulfenic methyl ester (-SOCH₃) at one cysteine residue and a thiol (-SH) at the other. Under low energy collision-induced dissociation (CID), cysteine sulfenic methyl ester motif produces a signature methanol loss (-32 Da), allowing its identification from other possible isomeric structures such as S-hydroxylmethyl (-SCH₂OH) and methyl sulfoxide (-S(O)-CH₃). Since disulfide bond can be selectively cleaved and modified upon methoxy addition, subsequent MS² CID of the methoxy addition product provides enhanced sequence coverage as demonstrated by the analysis of bovine insulin. More importantly, this reaction does not induce disulfide scrambling, likely due to the fact that radical intermediates are not involved in the process. An approach based on methoxy addition followed by MS³ CID has been developed for assigning disulfide linkage patterns in peptide disulfide regio-isomers. This methodology was successfully applied to characterizing peptide systems having two disulfide bonds and three disulfide linkage isomers: side-by-side, overlapped, and looped-within-a-loop configurations. Graphical Abstract ᅟ.

Mechanism investigation of HS radical and CS losses from positively charged biradicals of diphenyl sulfides by APCI mass spectrometry

RATIONALE

Aryl thioethers are potentially useful precursors for constructing various biologically active sulfur-containing heterocycles. The detailed relationship between the losses of HS radical and CS with the spin multiplicity of positively charged diphenyl sulfide biradicals derived from 3-iodophenyl phenyl sulfides has not been obtained by tandem mass spectrometry combined with theoretical calculations.

METHODS

Collision-induced dissociation mass spectrometry experiments were carried out using an ion trap mass spectrometer with APCI in positive mode. The MS/MS experiment for dibenzothiophene was performed by CI triple-quadrupole mass spectrometry in positive ion mode. The accurate masses of fragments were obtained by reflective TOFMS with an EI source. Theoretical calculations were achieved by the density functional theory method at the B3LYP level with the 6-31+G(d, p) basis set in the Gaussian 03 package of programs.

RESULTS

In the fragmentation of positively charged diphenyl sulfide biradicals, losses of HS· and CS were observed, which were proposed to originate from spin multiplicity transformation from a triplet ground state to a singlet excited state and a phenyl radical shift in triplet ground state, respectively. Moreover, a protonated dibenzothiophene intermediate was confirmed to exist in the process of HS radical loss. A linear correlation was established between the product ion abundance from the two competitive losses and the Hammett constants (σ) of substituent groups on the benzene ring.

CONCLUSIONS

The eliminations of HS· and CS in the fragmentation of positively charged diphenyl sulfide biradicals were triggered by spin multiplicity transformation from a triplet ground state to a singlet excited state and a phenyl radical shift in a triplet ground state, respectively. Based on theoretical calculations, two competitive neutral losses are thermodynamically controlled. Copyright © 2016 John Wiley & Sons, Ltd.

Chemical Characterization of Urate Hydroperoxide, A Pro-oxidant Intermediate Generated by Urate Oxidation in Inflammatory and Photoinduced Processes

Urate hydroperoxide is a strong oxidant generated by the combination of urate free radical and superoxide. The formation of urate hydroperoxide as an intermediate in urate oxidation is potentially responsible for the pro-oxidant effects of urate in inflammatory disorders, protein degradation, and food decomposition. To understand the molecular mechanisms that sustain the harmful effects of urate in inflammatory and oxidative stress related conditions, we report a detailed structural characterization and reactivity of urate hydroperoxide toward biomolecules. Urate hydroperoxide was synthesized by photo-oxidation and by a myeloperoxidase/hydrogen peroxide/superoxide system. Multiple reaction monitoring (MRM) and MS(3) ion fragmentation revealed that urate hydroperoxide from both sources has the same chemical structure. Urate hydroperoxide has a maximum absorption at 308 nm, ε308nm = 6.54 ± 0.38 × 10(3) M(-1) cm(-1). This peroxide decays spontaneously with a rate constant of k = 2.80 ± 0.18 × 10(-4) s(-1) and a half-life of 41 min at 22 °C. Urate hydroperoxide undergoes electrochemical reduction at potential values less negative than -0.5 V (versus Ag/AgCl). When incubated with taurine, histidine, tryptophan, lysine, methionine, cysteine, or glutathione, urate hydroperoxide reacted only with methionine, cysteine, and glutathione. The oxidation of these molecules occurred by a two-electron mechanism, generating the alcohol, hydroxyisourate. No adduct between cysteine or glutathione and urate hydroperoxide was detected. The second-order rate constant for the oxidation of glutathione by urate hydroperoxide was 13.7 ± 0.8 M(-1) s(-1). In conclusion, the oxidation of sulfur-containing biomolecules by urate hydroperoxide is likely to be a mechanism by which the pro-oxidant and damaging effects of urate are mediated in inflammatory and photo-oxidizing processes.

Mechanisms and energetics of free radical initiated disulfide bond cleavage in model peptides and insulin by mass spectrometry

We investigate the mechanism of disulfide bond cleavage in gaseous peptide and protein ions initiated by a covalently-attached regiospecific acetyl radical using mass spectrometry (MS). Highly selective S-S bond cleavages with some minor C-S bond cleavages are observed by a single step of collisional activation. We show that even multiple disulfide bonds in intact bovine insulin are fragmented in the MS2 stage, releasing the A- and B-chains with a high yield, which has been challenging to achieve by other ion activation methods. Yet, regardless of the previous reaction mechanism studies, it has remained unclear why (1) disulfide bond cleavage is preferred to peptide backbone fragmentation, and why (2) the S-S bond that requires the higher activation energy conjectured in previously suggested mechanisms is more prone to be cleaved than the C-S bond by hydrogen-deficient radicals. To probe the mechanism of these processes, model peptides possessing deuterated β-carbon(s) at the disulfide bond are employed. It is suggested that the favored pathway of S-S bond cleavage is triggered by direct acetyl radical attack at sulfur with concomitant cleavage of the S-S bond (SH2). The activation energy for this process is substantially lower by ∼9-10 kcal mol-1 than those of peptide backbone cleavage processes determined by density functional quantum chemical calculations. Minor reaction pathways are initiated by hydrogen abstraction from the α-carbon or the β-carbon of a disulfide, followed by β-cleavages yielding C-S or S-S bond scissions. The current mechanistic findings should be generally applicable to other radical-driven disulfide bond cleavages with different radical species such as the benzyl and methyl pyridyl radicals.

Software eyes for protein post-translational modifications

Post-translational modifications (PTMs) are critical to almost all aspects of complex processes of the cell. Identification of PTMs is one of the biggest challenges for proteomics, and there have been many computational studies for the analysis of PTMs from tandem mass spectrometry (MS/MS). Most early PTM identification studies have been performed by matching MS/MS data to protein databases, using database search tools, but they are prohibitively slow when a large number of PTMs is given as a search parameter. In this article, we present recent developments to search for more types of PTMs and to speed up the search, and discuss many computational issues and solutions in terms of identifying multiply modified peptides or searching for all possible modifications at once in unrestrictive mode. Apart from the most common type of PTMs involving covalent addition of functional groups to proteins, PTMs such as disulfide linkage require dedicated software for the analysis because they may involve cross-linking between two different parts of proteins. Finally, methods for identification of protein disulfide bonds are presented.

Increasing Fragmentation of Disulfide-Bonded Proteins for Top-Down Mass Spectrometry by Supercharging

The disulfide bond is an important post-translational modification to form and maintain the native structure and biological functions of proteins. Characterization of disulfide bond linkages is therefore of essential interest in the structural elucidation of proteins. Top-down mass spectrometry (MS) of disulfide-bonded proteins has been hindered by relatively low sequence coverage due to disulfide cross-linking. In this study, we employed top-down ESI-MS with Fourier-transform ion cyclotron resonance (FT-ICR) MS with electron capture dissociation (ECD) and collisionally activated dissociation (CAD) to study the fragmentation of supercharged proteins with multiple intramolecular disulfide bonds. With charge enhancement upon the addition of sulfolane to the analyte solution, improved protein fragmentation and disulfide bond cleavage efficiency was observed for proteins including bovine β-lactoglobulin, soybean trypsin inhibitor, human proinsulin, and chicken lysozyme. Both the number and relative abundances of product ions representing disulfide cleavage increase with increasing charge states for the proteins studied. Our studies suggest supercharging ESI-MS is a promising tool to aid in the top-down MS analysis of disulfide-bonded proteins, providing potentially useful information for the determination of disulfide bond linkages.

Structural characterization of arginine-vasopressin and lysine-vasopressin by Fourier- transform ion cyclotron resonance mass spectrometry and infrared multiphoton dissociation

Arginine-vasopressin (AVP) and lysine-vasopressin (LVP) were analyzed by reversed-phase liquid chromatography/mass spectrometry (LC-MS) using Fourier-transform ion cyclotron resonance (FT-ICR) mass spectrometry (MS) electrospray ionization (ESI) in the positive ion mode. LVP and AVP exhibited the protonated adduct [M+H](+) as the predominant ion at m/z 1056.43965 and at m/z 1084.44561, respectively. Infrared multiphoton dissociation (IRMPD), using a CO(2) laser source at a wavelength of 10.6 μm, was applied to protonated vasopressin molecules. The IRMPD mass spectra presented abundant mass fragments essential for a complete structural information. Several fragment ions, shared between two target molecules, are discussed in detail. Some previously unpublished fragments were identified unambiguously utilizing the high resolution and accurate mass information provided by the FT-ICR mass spectrometer. The opening of the disulfide loop and the cleavage of the peptide bonds within the ring were observed even under low-energy fragmentation conditions. Coupling the high-performance FT-ICR mass spectrometer with IRMPD as a contemporary fragmentation technique proved to be very promising for the structural characterization of vasopressin.

Fragmentation follows structure: top-down mass spectrometry elucidates the topology of engineered cystine-knot miniproteins

Over the last decades the field of pharmaceutically relevant peptides has enormously expanded. Among them, several peptide families exist that contain three or more disulfide bonds. In this context, elucidation of the disulfide patterns is extremely important as these motifs are often prerequisites for folding, stability, and activity. An example of this structure-determining pattern is a cystine knot which comprises three constrained disulfide bonds and represents a core element in a vast number of mechanically interlocked peptidic structures possessing different biological activities. Herein, we present our studies on disulfide pattern determination and structure elucidation of cystine-knot miniproteins derived from Momordica cochinchinensis peptide MCoTI-II, which act as potent inhibitors of human matriptase-1. A top-down mass spectrometric analysis of the oxidised and bioactive peptides is described. Following the detailed sequencing of the peptide backbone, interpretation of the MS(3) spectra allowed for the verification of the knotted topology of the examined miniproteins. Moreover, we found that the fragmentation pattern depends on the knottin's folding state, hence, tertiary structure, which to our knowledge has not been described for a top-down MS approach before.

UV Photofragmentation Dynamics of Protonated Cystine: Disulfide Bond Rupture

Disulfide bonds (S-S) play a central role in stabilizing the native structure of proteins against denaturation. Experimentally, identification of these linkages in peptide and protein structure characterization remains challenging. UV photodissociation (UVPD) can be a valuable tool in identifying disulfide linkages. Here, the S-S bond acts as a UV chromophore and absorption of one UV photon corresponds to a σ-σ* transition. We have investigated the photodissociation dynamics of protonated cystine, which is a dimer of two cysteines linked by a disulfide bridge, at 263 nm (4.7 eV) using a multicoincidence technique in which fragments coming from the same fragmentation event are detected. Two types of bond cleavages are observed corresponding to the disulfide (S-S) and adjacent C-S bond ruptures. We show that the S-S cleavage leads to three different fragment ions via three different fragmentation mechanisms. The UVPD results are compared to collision-induced dissociation (CID) and electron-induced dissociation (EID) studies.

Strategies in mass spectrometry for the assignment of Cys-Cys disulfide connectivities in proteins

Elucidating disulfide linkage patterns is a crucial part of protein characterization, for which mass spectrometry (MS) is now an indispensable analytical tool. In many cases, MS-based disulfide connectivity assignment is straightforwardly achieved using one-step protein fragmentation in the unreduced form followed by mass measurement of bridged fragments. By contrast, venom proteins, which are receiving increasing interest as potential therapeutics, are a challenge for MS-based disulfide assignment due to their numerous closely spaced cysteines and knotted disulfide structure, requiring creative strategies to determine their connectivity. Today, these include the use of an array of reagents for enzymatic and/or chemical cleavage, partial reduction, differential cysteine labeling and tandem MS. This review aims to describe the toolkit of techniques available to MS users approaching both straightforward and complex disulfide bridge assignments, with a particular focus on strategies utilizing standard instrumentation found in a well-equipped analytical or proteomics laboratory.

Collision-induced dissociation fragmentation inside disulfide C-terminal loops of natural non-tryptic peptides

Collision-induced dissociation (CID) spectra of long non-tryptic peptides are usually quite complicated and rather difficult to interpret. Disulfide bond formed by two cysteine residues at C-terminus of frog skin peptides precludes one to determine sequence inside the forming loop. Thereby, chemical modification of S-S bonds is often used in "bottom up" sequencing approach. However, low-energy CID spectra of natural non-tryptic peptides with C-terminal disulfide cycle demonstrate an unusual fragmentation route, which may be used to elucidate the "hidden" C-terminal sequence. Low charge state protonated molecules experience peptide bond cleavage at the N-terminus of C-terminal cysteine. The forming isomeric acyclic ions serve as precursors for a series of b-type ions revealing sequence inside former disulfide cycle. The reaction is preferable for peptides with basic lysine residues inside the cycle. It may also be activated by acidic protons of Asp and Glu residues neighboring the loop. The observed cleavages may be quite competitive, revealing the sequence inside disulfide cycle, although S-S bond rupture does not occur in this case.

Scrambling of autoinducing precursor peptides investigated by infrared multiphoton dissociation with electrospray ionization and Fourier transform ion cyclotron resonance mass spectrometry

Two synthetic precursor peptides, H(2)N-CVGIW and H(2)N-LVMCCVGIW, involved in the quorum sensing of Lactobacillus plantarum WCFS1, were characterized by mass spectrometry (MS) with electrospray ionization and 7-T Fourier transform ion cyclotron resonance (ESI-FTICR) instrument. Cell-free bacterial supernatant solutions were analyzed by reversed-phase liquid chromatography with ESI-FTICR MS to verify the occurrence of both pentapeptide and nonapeptide in the bacterial broth. The structural characterization of both protonated peptides was performed by infrared multiphoton dissociation using a continuous CO(2) laser source at a wavelength of 10.6 μm. As their fragmentation behavior cannot be directly derived from the primary peptide structure, all anomalous fragments were interpreted as neutral loss of amino acids from the interior of both peptides, i.e., loss of V, G, VG and M, MC, V, CC, from H(2)N-CVGIW and H(2)N-LVMCCVGIW, respectively. Mechanisms of this scrambling are proposed. FTICR MS provides accurate masses of all fragment ions with very low absolute mass errors (<1.6 ppm), which facilitated the reliable assignment of their elemental compositions. The resolving power was more than sufficient to resolve closely isobaric product ions with routine subparts per million mass accuracies. Only the occurrence of pentapeptide was found in the cell-free culture of L. plantarum, grown in Waymouth's medium broth, with a low content of 5.2 ± 2.6 μM by external calibration. Most of it was present as oxidized H(2)N-CVGIW, that is, the soluble disulfide pentapeptide with a level tenfold higher (i.e., 50 ± 4 μM, n = 3).

Does Electron Capture Dissociation Cleave Protein Disulfide Bonds?

Peptide and protein characterization by mass spectrometry (MS) relies on their dissociation in the gas phase into specific fragments whose mass values can be aligned as 'mass ladders' to provide sequence information and to localize possible post-translational modifications. The most common dissociation method involves slow heating of even-electron (M+nH) ⁿ⁺ ions from electrospray ionization by energetic collisions with inert gas, and cleavage of amide backbone bonds. More recently, dissociation methods based on electron capture or transfer were found to provide far more extensive sequence coverage through unselective cleavage of backbone N-Cα bonds. As another important feature of electron capture dissociation (ECD) and electron transfer dissociation (ETD), their unique unimolecular radical ion chemistry generally preserves labile posttranslational modifications such as glycosylation and phosphorylation. Moreover, it was postulated that disulfide bond cleavage is preferred over backbone cleavage, and that capture of a single electron can break both a backbone and a disulfide bond, or even two disulfide bonds between two peptide chains. However, the proposal of preferential disulfide bond cleavage in ECD or ETD has recently been debated. The experimental data presented here reveal that the mechanism of protein disulfide bond cleavage is much more intricate than previously anticipated.

Gas-phase peptide sulfinyl radical ions: formation and unimolecular dissociation

A variety of peptide sulfinyl radical (RSO•) ions with a well-defined radical site at the cysteine side chain were formed at atmospheric pressure (AP), sampled into a mass spectrometer, and investigated via collision-induced dissociation (CID). The radical ion formation was based on AP reactions between oxidative radicals and peptide ions containing single inter-chain disulfide bond or free thiol group generated from nanoelectrospray ionization (nanoESI). The radical induced reactions allowed large flexibility in forming peptide radical ions independent of ion polarity (protonated or deprotonated) or charge state (singly or multiply charged). More than 20 peptide sulfinyl radical ions in either positive or negative ion mode were subjected to low energy collisional activation on a triple-quadrupole/linear ion trap mass spectrometer. The competition between radical- and charge-directed fragmentation pathways was largely affected by the presence of mobile protons. For peptide sulfinyl radical ions with reduced proton mobility (i.e., singly protonated, containing basic amino acid residues), loss of 62 Da (CH(2)SO), a radical-initiated dissociation channel, was dominant. For systems with mobile protons, this channel was suppressed, while charge-directed amide bond cleavages were preferred. The polarity of charge was found to significantly alter the radical-initiated dissociation channels, which might be related to the difference in stability of the product ions in different ion charge polarities.

Click chemistry facilitates formation of reporter ions and simplified synthesis of amine-reactive multiplexed isobaric tags for protein quantification

We report the development of novel reagents for cell-level protein quantification, referred to as Caltech isobaric tags (CITs), which offer several advantages in comparison with other isobaric tags (e.g., iTRAQ and TMT). Click chemistry, copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC), is applied to generate a gas-phase cleavable linker suitable for the formation of reporter ions. Upon collisional activation, the 1,2,3-triazole ring constructed by CuAAC participates in a nucleophilic displacement reaction forming a six-membered ring and releasing a stable cationic reporter ion. To investigate its utility in peptide mass spectrometry, the energetics of the observed fragmentation pathway are examined by density functional theory. When this functional group is covalently attached to a target peptide, it is found that the nucleophilic displacement occurs in competition with formation of b- and y-type backbone fragment ions regardless of the amino acid side chains present in the parent bioconjugate, confirming that calculated reaction energetics of reporter ion formation are similar to those of backbone fragmentations. Based on these results, we apply this selective fragmentation pathway for the development of CIT reagents. For demonstration purposes, duplex CIT reagent is prepared using a single isotope-coded precursor, allyl-d(5)-bromide, with reporter ions appearing at m/z 164 and 169. Isotope-coded allyl azides for the construction of the reporter ion group can be prepared from halogenated alkyl groups which are also employed for the mass balance group via N-alkylation, reducing the cost and effort for synthesis of isobaric pairs. Owing to their modular designs, an unlimited number of isobaric combinations of CIT reagents are, in principle, possible. The reporter ion mass can be easily tuned to avoid overlapping with common peptide MS/MS fragments as well as the low mass cutoff problems inherent in ion trap mass spectrometers. The applicability of the CIT reagent is tested with several model systems involving protein mixtures and cellular systems.

Disulfide bond cleavage in TEMPO-free radical initiated peptide sequencing mass spectrometry

The gas-phase free radical initiated peptide sequencing (FRIPS) fragmentation behavior of o-TEMPO-Bz-conjugated peptides with an intra- and intermolecular disulfide bond was investigated using MS(n) tandem mass spectrometry experiments. Investigated peptides included four peptides with an intramolecular cyclic disulfide bond, Bactenecin (RLCRIVVIRVCR), TGF-α (CHSGYVGVRC), MCH (DFDMLRCMLGRVFRPCWQY) and Adrenomedullin (16-31) (CRFGTCTVQKLAHQIY), and two peptides with an intermolecular disulfide bond. Collisional activation of the benzyl radical conjugated peptide cation, which was generated through the release of a TEMPO radical from o-TEMPO-Bz-conjugated peptides upon initial collisional activation, produced a large number of peptide backbone fragments in which the S-S or C-S bond was readily cleaved. The observed peptide backbone fragments included a-, c-, x- or z-types, which indicates that the radical-driven peptide fragmentation mechanism plays an important role in TEMPO-FRIPS mass spectrometry. FRIPS application of the linearly linked disulfide peptides further showed that the S-S or C-S bond was selectively and preferentially cleaved, followed by peptide backbone dissociations. In the FRIPS mass spectra, the loss of •SH or •SSH was also abundantly found. On the basis of these findings, FRIPS fragmentation pathways for peptides with a disulfide bond are proposed. For the cleavage of the S-S bond, the abstraction of a hydrogen atom at C(β) by the benzyl radical is proposed to be the initial radical abstraction/transfer reaction. On the other hand, H-abstraction at C(α) is suggested to lead to C-S bond cleavage, which yields [ion ± S] fragments or the loss of •SH or •SSH.

Gas-phase fragmentation of [M+nH+OH]n•+ ions formed from peptides containing intra-molecular disulfide bonds

In this study, we systematically investigated gas-phase fragmentation behavior of [M + nH + OH](n•+) ions formed from peptides containing intra-molecular disulfide bond. Backbone fragmentation and radical initiated neutral losses were observed as the two competing processes upon low energy collision-induced dissociation (CID). Their relative contribution was found to be affected by the charge state (n) of [M + nH + OH](n•+) ions and the means for activation, i.e., beam-type CID or ion trap CID. Radical initiated neutral losses were promoted in ion-trap CID and for lower charge states where mobile protons were limited. Beam-type CID and dissociation of higher charge states of [M + nH + OH](n•+) ions generally gave abundant backbone fragmentation, which was highly desirable for characterizing peptides containing disulfide bonds. The amount of sequence information obtained from CID of [M + nH + OH](n•+) ions was compared with that from CID of disulfide bond reduced peptides. For the 11 peptides studied herein, similar extent of sequence information was obtained from these two methods.

Collision induced dissociation products of disulfide-bonded peptides: ions result from the cleavage of more than one bond

Disulfide bonds are a post-translational modification (PTM) that can be scrambled or shuffled to non-native bonds during recombinant expression, sample handling, or sample purification. Currently, mapping of disulfide bonds is not easy because of various sample requirements and data analysis difficulties. One step towards facilitating this difficult work is developing a better understanding of how disulfide-bonded peptides fragment during collision induced dissociation (CID). Most automated analysis algorithms function based on the assumption that the preponderance of product ions observed during the dissociation of disulfide-bonded peptides result from the cleavage of just one peptide bond, and in this report we tested that assumption by extensively analyzing the product ions generated when several disulfide-bonded peptides are subjected to CID on a quadrupole time of flight (QTOF) instrument. We found that one of the most common types of product ions generated resulted from two peptide bond cleavages, or a double cleavage. We found that for several of the disulfide-bonded peptides analyzed, the number of double cleavage product ions outnumbered those of single cleavages. The influence of charge state and precursor ion size was investigated, to determine if those parameters dictated the amount of double cleavage product ions formed. It was found in this sample set that no strong correlation existed between the charge state or peptide size and the portion of product ions assigned as double cleavages. These data show that these ions could account for many of the product ions detected in CID data of disulfide bonded peptides. We also showed the utility of double cleavage product ions on a peptide with multiple cysteines present. Double cleavage products were able to fully characterize the bonding pattern of each cysteine where typical single b/y cleavage products could not.

Induction and identification of disulfide-intact and disulfide-reduced β-subunit of Shiga toxin 2 from Escherichia coli O157:H7 using MALDI-TOF-TOF-MS/MS and top-down proteomics

The disulfide-intact and disulfide-reduced β-subunit of Shiga toxin 2 (β-Stx2) from Escherichia coli O157:H7 (strain EDL933) has been identified by matrix-assisted laser desorption/ionization time-of-flight-time-of-flight tandem mass spectrometry (MALDI-TOF-TOF-MS/MS) and top-down proteomic analysis using software developed in-house. E. coli O157:H7 was induced to express Stx2 by culturing on solid agar media supplemented with 10-50 ng mL(-1) of ciprofloxacin (CP). Bacterial cell lysates at each CP concentration were analyzed by MALDI-TOF-MS. A prominent ion at mass-to-charge (m/z) ~7820 was observed for the CP concentration range: 10-50 ng mL(-1), reaching a maximum signal intensity at 20 ng mL(-1). Complex MS/MS data were obtained of the ion at m/z ~7820 by post-source decay resulting in top-down proteomic identification as the mature, signal peptide-removed, disulfide-intact β-Stx2. Eight fragment ion triplets (each spaced Δm/z ~33 apart) were also observed resulting from backbone cleavage between the two cysteine residues (that form the intra-molecular disulfide bond) and symmetric and asymmetric cleavage of the disulfide bond. The middle fragment ion of each triplet, from symmetric disulfide bond cleavage, was matched to an in silico fragment ion formed from cleavage of the backbone at a site adjacent to an aspartic acid or glutamic acid residue. The flanking fragment ions of each triplet, from asymmetric disulfide bond cleavage, were not matched because their corresponding in silico fragment ions are not represented in the database. Easier to interpret MS/MS data were obtained for the disulfide-reduced β-Stx2 which resulted in an improved top-down identification.

Studying disulfide bond rearrangement by MALDI-RTOF PSD and MALDI-TOF/RTOF high-energy CID (20 keV) experiments of peptides derived from ammodytoxins

Ammodytoxins (Atxs) are presynaptically neurotoxic phospholipases present in Vipera ammodytes ammodytes snake venom. Atxs show a high sequence homology and contain 14 cysteines which form seven biologically relevant disulfide bridges-connecting non-neighboring cysteines. Formic acid cleavage was performed to confirm protein sequences by MALDI RTOF MS and resulted in 95.6% sequence coverage exhibiting only few formylations. Cysteine-containing peptides showed adjacent signals 2 and/or 4 Da lower (according to the number of cysteines present in the peptide) than the theoretical molecular weight indicating disulfide bridge rearrangement. Post-source decay (PSD) and high-energy collision-induced dissociation (CID) at 20 keV experiments showed fragmentation pattern unique for the reduced, thiol group containing and the oxidized, disulfide bridge harboring peptides. Besides typical low-energy fragment ions observed during PSD experiments (a-, b-, y-type ions), additional high-energy fragment ions (c-, x-, w-, d-type and internal fragments) of significant intensity were generated during fragmentation at 20 keV. In the case of charge directing N- and C-termini, x- and w-type ions were also observed during PSD. Good and up to complete sequence coverage was achieved for all studied peptides from Atxs in the case of high-energy CID, whereas PSD lacked information particularly for larger peptides.

Sequence tagging reveals unexpected modifications in toxicoproteomics

Toxicoproteomic samples are rich in posttranslational modifications (PTMs) of proteins. Identifying these modifications via standard database searching can incur significant performance penalties. Here, we describe the latest developments in TagRecon, an algorithm that leverages inferred sequence tags to identify modified peptides in toxicoproteomic data sets. TagRecon identifies known modifications more effectively than the MyriMatch database search engine. TagRecon outperformed state of the art software in recognizing unanticipated modifications from LTQ, Orbitrap, and QTOF data sets. We developed user-friendly software for detecting persistent mass shifts from samples. We follow a three-step strategy for detecting unanticipated PTMs in samples. First, we identify the proteins present in the sample with a standard database search. Next, identified proteins are interrogated for unexpected PTMs with a sequence tag-based search. Finally, additional evidence is gathered for the detected mass shifts with a refinement search. Application of this technology on toxicoproteomic data sets revealed unintended cross-reactions between proteins and sample processing reagents. Twenty-five proteins in rat liver showed signs of oxidative stress when exposed to potentially toxic drugs. These results demonstrate the value of mining toxicoproteomic data sets for modifications.

Dissociation of copper(II) ternary complexes containing cystine

The collision-induced dissociations are reported for Cu(II) complexes containing 1,4,7-triazacyclononane (tacn) as the auxiliary ligand and a peptide containing one cystine residue. For six of the complexes examined, cleavage of the S-S bond in the peptide was the dominant fragmentation pathway. The exceptions were for complexes containing the largest peptides, (GlyCys'Gly)(2) and (GlyGlyCys')(2) (Cys' = NHCH(CH(2)S)CO, one half of the cystine residue; terminal H and OH are implicit), for which proton transfer to the auxiliary ligand was the major channel. Cleavage of the C-S bond was observed, but was a minor channel for all complexes. The radical cation (Cys')(2)(*+) was not observed although the complementary ion [Cu(I)(tacn)](+) was present in moderate abundance. Density functional calculations (at B3LYP/6-311++G(d,p)) gave low barriers to fragmentation of (Cys')(2)(*+) by homolytic fission of the C-S bond of the canonical ion (barrier 16.5 kcal mol(-1)) and of the structure at the global minimum, a captodative ion (barrier 17.2 kcal mol(-1)). Peptide radical cations (GlyCys')(2)(*+), (GlyCys'Gly)(2)(*+), (GlyGlyCys')(2)(*+) and (GlyCys'(Cys')Gly)(*+) were observed in low abundances; the first two of these ions dissociated predominantly by fragmentation of the S-S bond, while the other two preferentially cleaved at an amide bond. No cleavage of the C-S bond was observed for the peptide radical cations. Density functional calculations at B3LYP/6-31G(d) established that the cystine in [Cu(II)(tacn)(Cys')(2)](*2+) is bound as a zwitterion through the carboxylate anion with the proton on the distal amino group. The lowest energy complex containing a canonical cystine, coordinated through the carbonyl oxygen and the amino group of the same Cys', is 8.3 kcal mol(-1) higher in enthalpy.

Gas-phase scrambling of disulfide bonds during matrix-assisted laser desorption/ionization mass spectrometry analysis

Evidence for photo-induced radical disulfide bond scrambling in the gas phase during matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) is described. The phenomenon was observed during the analysis of tryptic peptides from insulin and was confirmed in the determination of disulfide bonds in the rhamnose-binding lectin SEL24K from the Chinook salmon Oncorhynchus tshawytscha. A possible mechanism for this surprising scrambling is proposed. Despite this finding, the disulfide bond pattern in SEL24K was assigned unambiguously by a multi-enzyme digestion strategy in combination with MALDI mass spectrometry. The pattern was found to be symmetrical in the tandem repeat sequence of SEL24K. To the best of our knowledge, this is the first report of disulfide bond scrambling in the gas phase during MALDI-MS analysis. This observation has important ramifications for unambiguous assignment of disulfide bonds.

Characterization of alkali induced formation of lanthionine, trisulfides, and tetrasulfides from peptide disulfides using negative ion mass spectrometry

Peptide disulfides are unstable under alkaline conditions, resulting in the formation of products containing lanthionine and polysulfide linkages. Electrospray ionization mass spectrometry has been used to characterize major species obtained when cyclic and acyclic peptide disulfides are exposed to alkaline media. Studies on a model cyclic peptide disulfide (Boc-Cys-Pro-Leu-Cys-NHMe) and an acyclic peptide, oxidized glutathione, bis ((gamma)Glu - Cys - Gly - COOH), are described. Disulfide cleavage reactions are initiated by the abstraction of C(alpha)H or C(beta)H protons of Cys residues, with subsequent elimination of H(2)S or H(2)S(2). The buildup of reactive thiol species which act on intermediates containing dehydroalanine residues, rationalizes the formation of lanthionine and polysulfide products. In the case of the cyclic peptide disulfide, the formation of cyclic products is facilitated by the intramolecular nature of the Michael addition reaction of thiols to the dehydroalanine residue. Mass spectral evidence for the intermediate species is presented by using alkylation of thiol groups as a trapping method. Mass spectral fragmentation in the negative ion mode of the peptides derived from trisulfides and tetrasulfides results in elimination of S(2).

Thiol-disulfide redox equilibria of glutathione metaboloma compounds investigated by tandem mass spectrometry

The thiol group of cysteine plays a pivotal role in structural and functional biology. We use mass spectrometry to study glutathione-related homo- and heterodimeric disulfides, aiming at understanding the factors affecting the redox potentials of different disulfide/thiol pairs. Several electrospray ionization (ESI)-protonated disulfides of cysteamine, cysteine, penicillamine, N-acetylcysteine, N-acetylpenicillamine, gammaGluCySH, HSCyGly, and glutathione were analyzed on a triple quadrupole instrument to measure their energy-resolved tandem mass spectra. Fission of the disulfide bond yields RSH*H(+) and RS(+) ions. The logarithm of the intensity ratio of the RS(+)/RSH*H(+) fragments in homodimeric disulfides is proportional to the normal reduction potential of their RSSR/RSH pairs determined by nuclear magnetic resonance (NMR) in solution, the more reducing ones yielding the higher ratios. Also in some R(1)S-SR(2) disulfides, the ratio of the intensities of the RSH + H(+) and RS(+) ions of each participating thiol shows a linear relationship with the Nernst equation potential difference of the corresponding redox pairs. This behavior allows us to measure the redox potentials of some disulfide/thiol pairs by using different thiol-reducing probes of known oxidoreductive potential as reference. To assist understanding of the fission mechanism of the disulfide bond, the fragments tentatively identified as 'sulfenium' were themselves fragmented; accurate mass measurement of the resulting second-generation fragments demonstrated a loss of thioformaldehyde, thus supporting the assigned structure of this elusive intermediate of the oxidative stress pathway. Understanding this fragmentation process allows us to employ this technique with larger molecules to measure by mass spectrometry the micro-redox properties of different disulfide bonds in peptides with catalytic and signaling biological activity.