Effects of morphology on surface hydroxyl concentration: a DFT comparison of anatase–TiO2 and γ-alumina catalytic supports

A systematic DFT study of structure and electronic properties of titanium dioxide

DFT functionals are of paramount importance for an accurate electronic and structural description of transition metal systems. In this work, a systematic analysis using some well-known and commonly used DFT functionals is performed. A comparison of the structural and energetic parameters calculated with the available experimental data is made in order to find the adequate functional for an accurate description of the TiO2 bulk and surface of both anatase and rutile structures. In the absence of experimental data on the surface energy, the theoretical predictions obtained using the high-accuracy HSE06 functional were used as a reference to compare against the surface energy values calculated with the other DFT functionals. A clear improvement in the electronic description of both anatase and rutile was observed by introducing the Hubbard U correction term to PBE, PW91, and OptPBE functionals. The OptPBE-U4 functional was found to offer a good compromise between accurately describing the structural and electronic properties of titania.

Managing Expectations and Imbalanced Training Data in Reactive Force Field Development: An Application to Water Adsorption on Alumina

ReaxFF is a computationally efficient model for reactive molecular dynamics simulations that has been applied to a wide variety of chemical systems. When ReaxFF parameters are not yet available for a chemistry of interest, they must be (re)optimized, for which one defines a set of training data that the new ReaxFF parameters should reproduce. ReaxFF training sets typically contain diverse properties with different units, some of which are more abundant (by orders of magnitude) than others. To find the best parameters, one conventionally minimizes a weighted sum of squared errors over all of the data in the training set. One of the challenges in such numerical optimizations is to assign weights so that the optimized parameters represent a good compromise among all the requirements defined in the training set. This work introduces a new loss function, called Balanced Loss, and a workflow that replaces weight assignment with a more manageable procedure. The training data are divided into categories with corresponding "tolerances", i.e., acceptable root-mean-square errors for the categories, which define the expectations for the optimized ReaxFF parameters. Through the Log-Sum-Exp form of Balanced Loss, the parameter optimization is also a validation of one's expectations, providing meaningful feedback that can be used to reconfigure the tolerances if needed. The new methodology is demonstrated with a nontrivial parametrization of ReaxFF for water adsorption on alumina. This results in a new force field that reproduces both the rare and frequent properties of a validation set not used for training. We also demonstrate the robustness of the new force field with a molecular dynamics simulation of water desorption from a γ-Al2O3 slab model.

Prediction of Stable Surfaces of Metal Oxides through the Unsaturated Coordination Index

This study proposes the unsaturated coordination index, σ, as a potential descriptor of the stability of metal-oxide surfaces cleaved from bulk. The value of σ, the number of missing bonds per unit area, can be obtained very quickly using only crystallographic data, namely, the bulk geometry. The surface energies of various binary oxides, with and without atom relaxation, were calculated. Their correlations with σ had good coefficients of determination (R2) values, particularly in high-symmetry crystals. The proposed descriptor is very useful for an initial evaluation of stable metal-oxide surfaces without conducting any surface model calculations.

Physico-Chemical Approaches to Investigate Surface Hydroxyls as Determinants of Molecular Initiating Events in Oxide Particle Toxicity

The study of molecular recognition patterns is crucial for understanding the interactions between inorganic (nano)particles and biomolecules. In this review we focus on hydroxyls (OH) exposed at the surface of oxide particles (OxPs) which can play a key role in molecular initiating events leading to OxPs toxicity. We discuss here the main analytical methods available to characterize surface OH from a quantitative and qualitative point of view, covering thermogravimetry, titration, ζ potential measurements, and spectroscopic approaches (NMR, XPS). The importance of modelling techniques (MD, DFT) for an atomistic description of the interactions between membranes/proteins and OxPs surfaces is also discussed. From this background, we distilled a new approach methodology (NAM) based on the combination of IR spectroscopy and bioanalytical assays to investigate the molecular interactions of OxPs with biomolecules and membranes. This NAM has been already successfully applied to SiO₂ particles to identify the OH patterns responsible for the OxPs' toxicity and can be conceivably extended to other surface-hydroxylated oxides.

Restructuring of titanium oxide overlayers over nickel nanoparticles during catalysis

Reducible supports can affect the performance of metal catalysts by the formation of suboxide overlayers upon reduction, a process referred to as the strong metal-support interaction (SMSI). A combination of operando electron microscopy and vibrational spectroscopy revealed that thin TiO_x overlayers formed on nickel/titanium dioxide catalysts during 400°C reduction were completely removed under carbon dioxide hydrogenation conditions. Conversely, after 600°C reduction, exposure to carbon dioxide hydrogenation reaction conditions led to only partial reexposure of nickel, forming interfacial sites in contact with TiO_x and favoring carbon-carbon coupling by providing a carbon species reservoir. Our findings challenge the conventional understanding of SMSIs and call for more-detailed operando investigations of nanocatalysts at the single-particle level to revisit static models of structure-activity relationships.

Quantum Anharmonic Calculations of Vibrational Spectra for Water Adsorbed on Titania Anatase(101) Surface: Dissociative versus Molecular Adsorption

The interaction of water molecules and hydroxyl groups with titanium dioxide (TiO₂) surfaces is ubiquitous and very important in anatase nanoparticle photocatalytic processes. Infrared spectroscopy, assisted by ab initio calculations of vibrational frequencies, can be a powerful tool to elucidate the mechanisms behind water adsorption. However, a straightforward comparison between measurements and calculations remains a challenging task because of the complexity of the physical phenomena occurring on nanoparticle surfaces. Consequently, severe computational approximations, such as harmonic vibrational ones, are usually employed. In the present work we partially address this complexity issue by overcoming some of the standard approximations used in theoretical simulations and employ the Divide and Conquer Semiclassical Initial Value Representation (DC-SCIVR) molecular dynamics. This method allows to perform simulations of vibrational spectra of large dimensional systems accounting not only for anharmonicities, but also for nuclear quantum effects. We apply this computational method to water and deuterated water adsorbed on the ideal TiO₂ anatase(101) surface, contemplating both the molecular and the dissociated adsorption processes. The results highlight not only the presence of an anharmonic shift of the frequencies in agreement with the experiments, but also complex quantum mechanical spectral signatures induced by the coupling of molecular vibrational modes with the surface ones, which are different in the hydrogenated case from the deuterated one. These couplings are further analyzed by exploiting the mode subdivision performed during the divide and conquer procedure.

Electronic structures of the MoS2/TiO2 (anatase) heterojunction: influence of physical and chemical modifications at the 2D- or 1D-interfaces

To tackle the challenge of CO₂ photoreduction, semiconducting layered transition metal dichalcogenides like MoS₂ have attracted much attention due to their tunable 2D nano-structures. By using advanced periodic density functional theory calculations (HSE06 functional), we provide a systematic quantification of the optoelectronic properties of various interfacial heterostructures composed of 2H-MoS₂ and anatase TiO₂. We systematically determine the band gaps, and conduction band (CB) and valence band (VB) positions to figure out the nature of the heterojunction. Two main surface orientations of anatase TiO₂ particles, (101) and (001), are considered with 2D-MoS₂ nanosheets or nanoribbons forming either a 2D physical (van der Waals) or through a 1D chemical interface. The possibility to chemically modify the MoS₂/TiO₂ interface, either by sulfidation or hydration, and its effect on the electronic structure are deeply investigated. These modifications in the heterostructure lead to important changes in the electronic properties and charge transfer between the two materials which impact both photon absorption properties and charge carrier dynamics suspected to influence in turn the photocatalytic activity. While a type I hetrojunction is found for the 1D chemical interface, a type II heterojunction with appropriate CB/VB positions for CO₂ reduction and H₂O oxidation is identified for the 2D physical interface which could lead to the targeted Z-scheme mechanism with strong potential interest in photocatalysis applications.

Hydration of TiO2 Facets Regulates As(III) Adsorption: DFT and DRIFTS Study

Hydration of TiO₂ facets controls the reactions occurring at the mineral-water interfaces. However, the underlying mechanism of the facet-dependent hydration and the effect of hydration on contaminant adsorption are still ambiguous. Herein, arsenite [As(III)] adsorption on hydrated {001}, {100}, {101}, and {201} TiO₂ was explored by integrating multiple characterizations and density functional theory (DFT) calculations. Our macroscopic adsorption results show an As(III) adsorption density order of {201} > {100} > {101} > {001}, though As(III) on each facet formed a bidentate binuclear structure, as evidenced by the extended X-ray absorption fine structure analysis. The in situ diffuse reflectance infrared Fourier transform spectroscopy analysis identified distinctive surface hydroxyls on four-faceted TiO₂ upon water adsorption. The hydrated surface regulated the subsequent As(III) adsorption, giving an As(III) adsorption energy order of {201} (-0.95 eV) < {100} (-0.38 eV) < {101} (-0.005 eV) < {001} (0.04 eV) according to DFT calculations. The As(III) adsorption energy on hydrated facets was linearly correlated with the macroscopical As(III) adsorption density (R² = 0.99, p < 0.05), revealing that the impregnable water binding highly suppressed the exchange of As(III) molecules with adsorbed water. Our study provided a novel insight into the facet-dependent interfacial adsorption.

Electronic Structures of Hydroxyled Low Index Surfaces of Rutile and Anatase-Type Titanium Dioxide

Different surface planes of various types of TiO2 crystals have diverse catalysis effects on the splitting of H2O and H2 and the electronic structures of the formed hydroxylated titanium dioxide...

Morphology dependent effect of γ-Al2O3 for ethanol dehydration: nanorods and nanosheets

γ-Al2O3 nanorods gave the improved selectivity of C2H4 in ethanol dehydration due to the selective exposure of {100} facets.

The Effect of Pristine and Hydroxylated Oxide Surfaces on the Guaiacol HDO Process: A DFT Study

The acid‐base character of oxide supports is crucial for catalytic reactions. In this work, the acid‐base properties of five oxide surfaces common in heterogeneous catalysis were investigated and related to their interaction with monolignol compounds derived from lignin. We have used density functional theory simulations also to understand the role of the surfaces’ hydroxylation state. The results show that moderate hydroxyl coverage on the amphoteric γ‐Al₂O₃ (110) slightly strengthens the oxy‐compounds’ adsorption due to an increase in Lewis acidity. Similarly, low hydroxyl coverage on the reducible TiO₂ (101) enlarges its adsorption capacity by up to 42 % compared with its clean surface. The higher affinity is attributed to the more favourable interaction between the surface‐OH groups and the aromatic rings. Overall, the results indicate that hydroxyl coverage enhances the amphoteric and reducible adsorption capacity towards aromatic species.

Hydroxyl improving the activity, selectivity and stability of supported Ni single atoms for selective semi-hydrogenation

Atomically dispersed metal catalysts with high atomic utilization and selectivity have been widely studied for acetylene semi-hydrogenation in excess ethylene among others. Further improvements of activity and selectivity, in addition to stability and loading, remain elusive due to competitive adsorption and desorption between reactants and products, hydrogen activation, partial hydrogenation etc. on limited site available. Herein, comprehensive density functional theory calculations have been used to explore the new strategy by introducing an appropriate ligand to stabilize the active single atom, improving the activity and selectivity on oxide supports. We find that the hydroxyl group can stabilize Ni single atoms significantly by forming Ni1(OH)2 complexes on anatase TiO2(101), whose unique electronic and geometric properties enable high performance in acetylene semi-hydrogenation. Specifically, Ni1(OH)2/TiO2(101) shows favorable acetylene adsorption and promotes the heterolytic dissociation of H2 achieving high catalytic activity, and it simultaneously weakens the ethylene bonding to facilitate subsequent desorption showing high ethylene selectivity. Hydroxyl stabilization of single metal atoms on oxide supports and promotion of the catalytic activity are sensitive to transition metal and the oxide supports. Compared to Co, Rh, Ir, Pd, Pt, Cu, Ag and Au, and anatase ZrO2, IrO2 and NbO2 surfaces, the optimum interactions between Ni, O and Ti and resulted high activity, selectivity and stability make Ni1(OH)2/TiO2(101) a promising catalyst in acetylene hydrogenation. Our work provides valuable guidelines for utilization of ligands in the rational design of stable and efficient atomically dispersed catalysts.

Electrochemically switchable polymerization from surface-anchored molecular catalysts

Redox-switchable polymerizations of lactide and epoxides were extended to the solid state by anchoring an iron-based polymerization catalyst to TiO2 nanoparticles. The reactivity of the molecular complexes and their redox-switching characteristics were maintained in the solid-state. These properties resulted in surface-initiated polymerization reactions that produced polymer brushes whose chemical composition is dictated by the oxidation state of the iron-based complex. Depositing the catalyst-functionalized TiO2 nanoparticles on fluorine-doped tin oxide resulted in an electrically addressable surface that could be used to demonstrate spatial control in redox-switchable polymerization reactions. By using a substrate that contained two electrically isolated domains wherein one domain was exposed to an oxidizing potential, patterns of surface-bound polyesters and polyethers were accessible through sequential application of lactide and cyclohexene oxide. The differentially functionalized surfaces demonstrated distinct physical properties that illustrated the promise for using the method to pattern surfaces with multiple, chemically distinct polymer brushes.

Graphene coupled TiO2 photocatalysts for environmental applications: A review

Nanostructured photocatalysts have always offered opportunities to solve issues concerned with the environmental challenges caused by rapid urbanization and industrialization. These materials, due to their tunable physicochemical characteristics, are capable of providing a clean and sustainable ecosystem to humanity. One of the current thriving research focuses of visible-light-driven photocatalysts is on the nanocomposites of titanium dioxide (TiO₂) with carbon nanostructures, especially graphene. Coupling TiO₂ with graphene has proven more active by photocatalysis than TiO₂ alone. It is generally considered that graphene sheets act as an electron acceptor facilitating the transfer and separation of photogenerated electrons during TiO₂ excitation, thereby reducing electron-hole recombination. This study briefly reviews the fundamental mechanism and interfacial charge-transfer dynamics in TiO₂/graphene nanocomposites. Design strategies of various graphene-based hybrids are highlighted along with some specialized synthetic routes adopted to attain preferred properties. Importantly, the enhancing interfacial charge transfer of photogenerated e¯_CB through the graphene layers by morphology orientation of TiO₂, predominated exposure of their high energy crystal facets, defect engineering, enhancing catalytic sites in graphene, constructing dedicated architectures, tuning the nanomaterial dimensionality at the interface, and employing the synergism adopted through various modifications, are systematically compiled. Portraying the significance of these photocatalytic hybrids in environmental remediation, important applications including air and water purification, self-cleaning surfaces, H₂ production, and CO₂ reduction to desired fuels, are addressed.

Understanding the nature and location of hydroxyl groups on hydrated titania nanoparticles

TiO₂ nanoparticles (NPs) are intensively studied and widely used due to their huge potential in numerous applications involving their interaction with ultraviolet light (e.g., photocatalysis and sunscreens). Typically, these NPs are in water-containing environments and thus tend to be hydrated. As such, there is a growing need to better understand the physicochemical properties of hydrated TiO₂ NPs in order to improve their performance in photochemical applications (e.g., photocatalytic water splitting) and to minimise their environmental impact (e.g., potential biotoxicity). To help address the need for reliable and detailed data on how nano-titania interacts with water, we present a systematic experimental and theoretical study of surface hydroxyl (OH) groups on photoactive anatase TiO₂ NPs. Employing well-defined experimentally synthesised NPs and detailed realistic NP models, we obtain the measured and computed infrared spectra of the surface hydroxyls, respectively. By comparing the experimental and theoretical spectra we are able to identify the type and location of different OH groups in these NP systems. Specifically, our study allows us to provide unprecedented and detailed information about the coverage-dependent distribution of hydroxyl groups on the surface of experimental titania NPs, the degree of their H-bonding interactions and their associated assigned vibrational modes. Our work promises to lead to new routes for developing new and safe nanotechnologies based on hydrated TiO₂ NPs.

Hydrogen Production via Pd-TiO2 Photocatalytic Water Splitting under Near-UV and Visible Light: Analysis of the Reaction Mechanism

Photocatalytic hydrogen production via water splitting using a noble metal on a TiO2 is a technology that has developed rapidly over the past few years. Specifically, palladium doped TiO2 irradiated with near-UV or alternatively with visible light has shown promising results. With this end in mind, strategically designed experiments were developed in the Photo-CREC Water-II (PCW-II) Reactor using a 0.25 wt.% Pd-TiO2 under near-UV and visible light, and ethanol as an organic scavenger. Acetaldehyde, carbon monoxide, carbon dioxide, methane, ethane, ethylene, and hydrogen peroxide together with hydrogen were the main chemical species observed. A Langmuir adsorption isotherm was also established for hydrogen peroxide. On this basis, it is shown that pH variations, hydrogen peroxide formation/adsorption, and the production of various redox chemical species provide an excellent carbon element balance, as well as OH• and H• radicals balances. Under near-UV irradiation, 113 cm3 STP of H2 is produced after 6 h, reaching an 99.8% elemental carbon balance and 99.2% OH• and H• and radical balance. It is also proven that a similar reaction network can be considered adequate for the photoreduced Pd-TiO2 photocatalyst yielding 29 cm3 STP of H2 with 95.4% carbon and the 97.5% OH•–H• radical balance closures. It is shown on this basis that a proposed “series-parallel” reaction network describes the water splitting reaction using the mesoporous Pd-TiO2 and ethanol as organic scavenger.

Highly qualified InP based QDs through a temperature controlled ZnSe shell coating process and their DFT calculations

For QDs used in displays, a narrow emission linewidth and emission peak tuning depending on the morphology of the QDs are the most important factors in order to maximize the range of colors to be represented. CdSe-based QDs are known as the most suitable QDs for displays, but cadmium is a highly toxic and regulated substance for use worldwide; InP-based QDs are the most noteworthy alternative. However, InP-based QDs have a wider linewidth of emission light in the entire visible region compared to CdSe-based QDs. In this work, we use the ZnSe inner shell as a lattice buffer layer between the InGaP core and the ZnS outer shell in the type-I structure, using a heating-up method in which ZnSe precursors were added to a low-temperature core solution and then rapidly raised to a temperature of 270-320 °C. Interestingly, when reacting at high temperatures, the shape of the QDs changes to a tetrahedron, and the FWHM becomes narrower than at low temperature. To understand this phenomenon, we proceeded with transmission electron microscopy (TEM) and powder X-ray diffraction (PXRD) analyses, and a reasonable explanation was provided with DFT calculations.

Acidity of SiO2-Supported Metal Oxides in the Presence of H2O Using the AEIR Method: 2. Adsorption and Coadsorption of NH3 and H2O on TiO2/SiO2 Catalysts

Two different TiO₂/SiO₂ compounds containing TiO₂ nanodomains dispersed over SiO₂ were investigated applying the AEIR method at the adsorption equilibrium of NH₃ and H₂O from 300 to 723 K, particularly for the measurement of the individual heats of adsorption of the different species on Lewis acidic sites (LAS) and Brønsted acidic sites (BAS) as evaluation of the strength of the sites. It revealed two types of NH₃ adsorption sites: the first ones could correspond either to NH₃ species H-bonded to free OH groups or to coordinated weak LAS (named L1). The second ones (L2) were attributed to strongest LAS similar to those present at the surface of TiO₂ nanocrystallites. They also correspond to the stronger adsorption sites of H₂O. Two types of Brønsted acid sites (BAS) were additionally evidenced by the AEIR method and proposed to be specifically located on the Si-O-Ti bridging bonds at the TiO₂/SiO₂ interface. The heats of adsorption of the different adsorbed species provided by the AEIR method were consistent with literature data on average values of the heats of adsorption of NH₃ and H₂O from microcalorimetry measurements. The surface acidity of the two compounds in the presence of H₂O was determined using NH₃-H₂O coadsorption. At T ≥ 473 K, the NH₃ species on the L2 sites were not significantly displaced from the surface whatever the partial pressure of H₂O studied in agreement with the Temkin competitive model using the individual heats of adsorption of the NH₃ and H₂O species. This model also revealed the presence of a small amount of H₂O species adsorbed on L2 sites allowing H₂O dissociation or/and hydrolysis of SiOTi or TiOTi bridges, leading to the formation of a much higher amount of BAS. Therefore, this original work combining the AEIR method and the Temkin competitive model provided new insights for understanding water effects on acidic oxide catalysts.

Combining Theory and Experiment to Characterize the Voltammetric Behavior of Nickel Anodes in the Simons Process

The Simons process, otherwise known as the electrochemical fluorination (ECF) method, is widely used in industry to electrolytically synthesize chemicals for various purposes. Even to this day, the exact mechanism of the ECF reaction remains unknown, but is believed to involve the formation of an anodic nickel fluoride film with highly oxidized nickel centers. In this study, experiments and density functional theory calculations are combined to characterize the initial anodic peak occurring at potentials typically required in an ECF cell. NiF2 is believed to form a passivating layer at low potentials. The calculations show that a potential of +3.1 V is required to oxidize surface Ni2+ centers to Ni3+ . This is in good agreement with the measured anodic peak at +3.57 V.

Visualizing H2O molecules reacting at TiO2 active sites with transmission electron microscopy

Imaging a reaction taking place at the molecular level could provide direct information for understanding the catalytic reaction mechanism. We used in situ environmental transmission electron microscopy and a nanocrystalline anatase titanium dioxide (001) surface with (1 × 4) reconstruction as a catalyst, which provided highly ordered four-coordinated titanium “active rows” to realize real-time monitoring of water molecules dissociating and reacting on the catalyst surface. The twin-protrusion configuration of adsorbed water was observed. During the water–gas shift reaction, dynamic changes in these structures were visualized on these active rows at the molecular level.

On the stability of hydroxyl groups on substituted titania

The present study reports the stability of hydroxyl groups involving the surface coordinated oxygens of Pd,C,N-doped, and Pd/C and Pd/N-codoped anatase TiO₂, probed using DFT calculations.

Understanding the Role of Rutile TiO2 Surface Orientation on Molecular Hydrogen Activation

Titanium oxide (TiO₂) has been widely used in many fields, such as photocatalysis, photovoltaics, catalysis, and sensors, where its interaction with molecular H₂ with TiO₂ surface plays an important role. However, the activation of hydrogen over rutile TiO₂ surfaces has not been systematically studied regarding the surface termination dependence. In this work, we use density functional theory (PBE+U) to identify the pathways for two processes: the heterolytic dissociation of H₂ as a hydride–proton pair, and the subsequent H transfer from Ti to near O accompanied by reduction of the Ti sites. Four stoichiometric surface orientations were considered: (001), (100), (110), and (101). The lowest activation barriers are found for hydrogen dissociation on (001) and (110), with energies of 0.56 eV and 0.50 eV, respectively. The highest activation barriers are found on (100) and (101), with energies of 1.08 eV and 0.79 eV, respectively. For hydrogen transfer from Ti to near O, the activation barriers are higher (from 1.40 to 1.86 eV). Our results indicate that the dissociation step is kinetically more favorable than the H transfer process, although the latter is thermodynamically more favorable. We discuss the implications in the stability of the hydride–proton pair, and provide structures, electronic structure, vibrational analysis, and temperature effects to characterize the reactivity of the four TiO₂ orientations.

Toxicity of TiO2, ZnO, and SiO2 Nanoparticles in Human Lung Cells: Safe-by-Design Development of Construction Materials

Rapid progress in the development of highly efficient nanoparticle-based construction technologies has not always been accompanied by a corresponding understanding of their effects on human health and ecosystems. In this study, we compare the toxicological effects of pristine TiO₂, ZnO, SiO₂, and coated SiO₂ nanoparticles, and evaluate their suitability as additives to consolidants of weathered construction materials. First, water soluble tetrazolium 1 (WST-1) and lactate dehydrogenase (LDH) assays were used to determine the viability of human alveolar A549 cells at various nanoparticle concentrations (0–250 μg mL⁻¹). While the pristine TiO₂ and coated SiO₂ nanoparticles did not exhibit any cytotoxic effects up to the highest tested concentration, the pristine SiO₂ and ZnO nanoparticles significantly reduced cell viability. Second, as all developed nanoparticle-modified consolidants increased the mechanical strength of weathered sandstone, the decisive criterion for the selection of the most suitable nanoparticle additive was as low toxicity as possible. We believe that this approach would be of high importance in the industry, to identify materials representing top functional properties and low toxicity, at an early stage of the product development.

Carboxylic acid-capped ruthenium nanoparticles: experimental and theoretical case study with ethanoic acid

Given that the properties of metal nanoparticles (NPs) depend on several parameters (namely, morphology, size, surface composition, crystalline structure, etc.), a computational model that brings a better understanding of a structure-property relationship at the nanoscale is a significant plus in order to explain the surface properties of metal NPs and also their catalytic viability, in particular, when envisaging a new stabilizing agent. In this study we combined experimental and theoretical tools to obtain a mapping of the surface of ruthenium NPs stabilized by ethanoic acid as a new capping ligand. For this purpose, the organometallic approach was applied as the synthesis method. The morphology and crystalline structure of the obtained particles was characterized by state-of-the art techniques (TEM, HRTEM, WAXS) and their surface composition was determined by various techniques (solution and solid-state NMR, IR, chemical titration, DFT calculations). DFT calculations of the vibrational features of model NPs and of the chemical shifts of model clusters allowed us to secure the spectroscopic experimental assignations. Spectroscopic data as well as DFT mechanistic studies showed that ethanoic acid lies on the metal surface as ethanoate, together with hydrogen atoms. The optimal surface composition determined by DFT calculations appeared to be ca. [0.4-0.6] H/Rusurf and 0.4 ethanoate/RuSurf, which was corroborated by experimental results. Moreover, for such a composition, a hydrogen adsorption Gibbs free energy in the range -2.0 to -3.0 kcal mol-1 was calculated, which makes these ruthenium NPs a promising nanocatalyst for the hydrogen evolution reaction in the electrolysis of water.

BTEX adsorption on TiO2 anatase and rutile surfaces: DFT functionals

Benzene, toluene, ethylbenzene, and xylenes are volatile hydrocarbons known as BTEX, which present concerns about environmental problems. Density functional theory (DFT) functionals were used for the BTEX gas phase adsorption on TiO₂ (110) of rutile and (101) of anatase surfaces. Dispersion terms have shown the importance to treat weak interactions and were used to study these adsorptions using plane wave DFT calculations. All BTEX molecules have the same trend for the adsorption on rutile and anatase surfaces. The inclusion of dispersion terms has a significant contribution for the interaction energy. Density of states results suggest the hybridization between the d state of pentacoordinated titanium atoms (Ti_5C) and carbon p states of benzene. The adsorption energy values indicate an effective interaction between the BTEX and surfaces, mainly due to the aromatic π interaction, which is present in all adsorbates. However, for p-xylene the methyl hydrogen directs the second major influence. Graphical abstract Charge difference showing the system with the smallest interaction and the one with the largest interaction.

Experimental Insights into the Growth of Single Truncated Anatase Bipyramids

Fluorine has been recognized to selectively stabilize anatase titanium dioxide (TiO₂ ) crystal facets; however, resolving its physical location at the nanometer scale remains empirically elusive. Here, we provide direct experimental evidence to reveal the spatial distribution of fluorine on single truncated anatase bipyramids (TABs) using nanoscale secondary ion mass spectrometry (NanoSIMS). Fluorine was found to preferentially adsorb on the (001) facet compared to the (101) facet of TABs. Moreover, NanoSIMS depth profiling exhibited a significantly different fluorine distribution between these two facets in the near-surface region, illustrating the essential role of lattice-doped fluorine in the anisotropic crystal growth of TABs.

Calcium Phosphate Deposition on Planar and Stepped (101) Surfaces of Anatase TiO2: Introducing an Interatomic Potential for the TiO2/Ca-PO4/Water Interface

Titanium is commonly employed in orthopaedic and dental surgery, owing to its good mechanical properties. The titanium metal is usually passivated by a thin layer of its oxide, and in order to promote its integration with the biological tissue, it is covered by a bioactive material such as calcium phosphate (CaP). Here, we have investigated the deposition of calcium and phosphate species on the anatase phase of titanium dioxide (TiO₂) using interatomic potential-based molecular dynamics simulations. We have combined different force fields developed for CaP, TiO₂, and water, benchmarking the results against density functional theory calculations. On the basis of our study, we consider that the new parameters can be used successfully to study the nucleation of CaP on realistic anatase and rutile TiO₂ nanoparticles, including surface defects.

Diffusion and reaction pathways of water near fully hydrated TiO2 surfaces from ab initio molecular dynamics

Ab initio molecular dynamics simulations are reported for water-embedded TiO₂ surfaces to determine the diffusive and reactive behavior at full hydration. A three-domain model is developed for six surfaces [rutile (110), (100), and (001), and anatase (101), (100), and (001)] which describes waters as "hard" (irreversibly bound to the surface), "soft" (with reduced mobility but orientation freedom near the surface), or "bulk." The model explains previous experimental data and provides a detailed picture of water diffusion near TiO₂ surfaces. Water reactivity is analyzed with a graph-theoretic approach that reveals a number of reaction pathways on TiO₂ which occur at full hydration, in addition to direct water splitting. Hydronium (H₃O⁺) is identified to be a key intermediate state, which facilitates water dissociation by proton hopping between intact and dissociated waters near the surfaces. These discoveries significantly improve the understanding of nanoscale water dynamics and reactivity at TiO₂ interfaces under ambient conditions.

Morphology control of anatase TiO2 for well-defined surface chemistry

Surface hydroxyls of titanium dioxide (anatase) are studied by infrared spectroscopy, density functional theory and nuclear magnetic resonance. They are found to be dependent on morphology and fluoride content.

Influence of substrate on the structure of predominantly anatase TiO2films grown by reactive sputtering

Revealing the crystalline structure of predominantly grown anatase TiO₂films.