Dynamic surface composition in a Mars-van Krevelen type reaction: CO oxidation on Au/TiO2

A Water-Promoted Mars-van Krevelen Reaction Dominates Low-Temperature CO Oxidation over Au-Fe2O3 but Not over Au-TiO2

We provide experimental evidence that is inconsistent with often proposed Langmuir-Hinshelwood (LH) mechanistic hypotheses for water-promoted CO oxidation over Au-Fe2O3. Passing CO and H2O, but no O2, over Au-γ-Fe2O3 at 25 °C, we observe significant CO2 production, inconsistent with LH mechanistic hypotheses. Experiments with H218O further show that previous LH mechanistic proposals cannot account for water-promoted CO oxidation over Au-γ-Fe2O3. Guided by density functional theory, we instead postulate a water-promoted Mars-van Krevelen (w-MvK) reaction. Our proposed w-MvK mechanism is consistent both with observed CO2 production in the absence of O2 and with CO oxidation in the presence of H218O and 16O2. In contrast, for Au-TiO2, our data is consistent with previous LH mechanistic hypotheses.

CO Oxidation over Alumina-Supported Copper Catalysts

CO oxidation, one of the most important chemical reactions, has been commonly studied in both academia and the industry. It is one good probe reaction in the fields of surface science and heterogeneous catalysis, by which we can gain a better understanding and knowledge of the reaction mechanism. Herein, we studied the oxidation state of the Cu species to seek insight into the role of the copper species in the reaction activity. The catalysts were characterized by XRD, N2 adsorption-desorption, X-ray absorption spectroscopy, and temperature-programmed reduction. The obtained results suggested that adding of Fe into the Cu/Al2O3 catalyst can greatly shift the light-off curve of the CO conversion to a much lower temperature, which means the activity was significantly improved by the Fe promoter. From the transient and temperature-programmed reduction experiments, we conclude that oxygen vacancy plays an important role in influencing CO oxidation activity. Adding Fe into the Cu/Al2O3 catalyst can remove part of the oxygen from the Cu species and form more oxygen vacancy. These oxygen vacancy sites are the main active sites for CO oxidation reaction and follow a Mars-van Krevelen-type reaction mechanism.

Surface Oxygen Vacancies Confined by Ferroelectric Polarization for Tunable CO Oxidation Kinetics

Surface oxygen vacancies have been widely discussed to be crucial for tailoring the activity of various chemical reactions from CO, NO, to water oxidation by using oxide-supported catalysts. However, the real role and potential function of surface oxygen vacancies in the reaction remains unclear because of their very short lifetime. Here, it is reported that surface oxygen vacancies can be well confined electrostatically for a polarization screening near the perimeter interface between Pt {111} nanocrystals and the negative polar surface (001) of ferroelectric PbTiO_3. Strikingly, such a catalyst demonstrates a tunable catalytic CO oxidation kinetics from 200 °C to near room temperature by increasing the O₂ gas pressure, accompanied by the conversion curve from a hysteresis-free loop to one with hysteresis. The combination of reaction kinetics, electronic energy loss spectroscopy (EELS) analysis, and density functional theory (DFT) calculations, indicates that the oxygen vacancies stabilized by the negative polar surface are the active sites for O₂ adsorption as a rate-determining step, and then dissociated O moves to the surface of the Pt nanocrystals for oxidizing adsorbed CO. The results open a new pathway for tunable catalytic activity of CO oxidation.

Investigation of chlorine-poisoning mechanism of MnOx/TiO2 and MnOx-CeO2/TiO2 catalysts during o-DCBz catalytic decomposition: Experiment and first-principles calculation

The catalytic activity and stability of MnO_x/TiO₂ and MnO_x-CeO₂/TiO₂ catalysts for the oxidative degradation of 1,2-dichorobenzene (o-DCBz) at low temperatures (≤275 °C) were experimentally examined. The chlorine (Cl) poisoning mechanism of the catalysts was also clarified based on the catalyst characterization combined with theoretical calculations. Experimental results show that the MnO_x/TiO₂ catalyst is considerably deactivated during o-DCBz catalytic decomposition, mainly due to the chlorination of the catalytic active component. Ce addition and high temperature can effectively promote the resistance of MnO_x/TiO₂ catalyst to Cl poisoning. Density functional theory (DFT) calculations in the framework of first-principles reveal that Cl atom prefers to anchor on surface oxygen vacancy (OV) rather than on top site of Mn atom. The adsorption of Cl atom on surface OV hinders the dissociated adsorption of O₂ on surface OV and interrupts the regeneration of the surface reactive oxygen species. The adsorption of Cl atom on top site of Mn atom increases the formation energy of surface OV and damages the surface Lewis acid sites which act as the important adsorption sites for o-DCBz molecules. Ce addition causes Cl atom to adsorb preferentially onto the OV around Ce atom, which weakens the interaction between Cl atom and Mn atom. Consequently, the chlorination of the MnO_x species is prevented and the oxygen mobility of the catalyst is guaranteed to some extent.

The dome of gold nanolized for catalysis

Gold is noble in bulk but turns out to be a superior catalyst at the nanoscale when supported on oxides, in particular titania. The critical thickness for activity, namely two-layer gold particles on titania, observed two decades ago represents one of the most influential mysteries in the recent history of heterogeneous catalysis. By developing a Bayesian optimization controlled global potential energy surface exploration tool with machine learning potential, here we determine the atomic structures of gold particles within ∼2 nm on a TiO2 surface. We show that the smallest stable Au nanoparticle is Au24 which is pinned on the oxygen-rich TiO2 and exhibits an unprecedented dome architecture made by a single-layer Au sheet but with an apparent two-atomic-layer height. Importantly, this has the highest activity for CO oxidation at room temperature. The physical origin of the high activity is the outstanding electron storage ability of the nano-dome, which activates the lattice oxygen of the oxide. The determined CO oxidation mechanism, the simulated rate and the fitted apparent energy barrier are consistent with known experimental facts, providing key evidence for the presence of both the high-activity Au dome and the low-activity close-packed Au particles in real catalysts. The future direction for the preparation of active and stable Au-based catalysts is thus outlined.

Manipulating Interfaces of Electrocatalysts Down to Atomic Scales: Fundamentals, Strategies, and Electrocatalytic Applications

Raising electrocatalysis by rationally devising catalysts plays a core role in almost all renewable energy conversion and storage systems. The principal catalytic properties can be controlled and improved well by manipulation of interfaces, ascribed to the interactions among different components/players at the interfaces. In particular, manipulating interfaces down to atomic scales is becoming increasingly attractive, not only because those atoms at around the interface are the key players during electrocatalysis, but also, understandings on the atomic level electrocatalysis allow one to gain deep insights into the reaction mechanism. With the feature down-sizing to atomic scales, there is a timely need to redefine the interfaces, as some of them have gone beyond the conventionally perceived interfacial concept. In this overview, the key active players participating in the interfacial manipulation of electrocatalysts are examined, from a new angle of "atomic interface," including those individual atoms, defects, and their interactions, together with the essential characterization techniques for them. The specific approaches and pathways to engineer better atomic interfaces are investigated, and thus to enable the unique electrocatalysis for targeted applications. Looking beyond recent progress, the challenges and prospects of the atomic level interfacial engineering are also briefly visited.

Nanoscale Spatial Distribution of Supported Nanoparticles Controls Activity and Stability in Powder Catalysts for CO Oxidation and Photocatalytic H2 Evolution

Supported metal nanoparticles are essential components of high-performing catalysts, and their structures are intensely researched. In comparison, nanoparticle spatial distribution in powder catalysts is conventionally not quantified, and the influence of this collective property on catalyst performance remains poorly investigated. Here, we demonstrate a general colloidal self-assembly method to control uniformity of nanoparticle spatial distribution on common industrial powder supports. We quantify distributions on the nanoscale using image statistics and show that the type of nanospatial distribution determines not only the stability, but also the activity of heterogeneous catalysts. Widely investigated systems (Au-TiO2 for CO oxidation thermocatalysis and Pd-TiO2 for H2 evolution photocatalysis) were used to showcase the universal importance of nanoparticle spatial organization. Spatially and temporally resolved microkinetic modeling revealed that nonuniformly distributed Au nanoparticles suffer from local depletion of surface oxygen, and therefore lower CO oxidation activity, as compared to uniformly distributed nanoparticles. Nanoparticle spatial distribution also determines the stability of Pd-TiO2 photocatalysts, because nonuniformly distributed nanoparticles sinter while uniformly distributed nanoparticles do not. This work introduces new tools to evaluate and understand catalyst collective (ensemble) properties in powder catalysts, which thereby pave the way to more active and stable heterogeneous catalysts.

Selective immobilization of single-atom Au on cerium dioxide for low-temperature removal of C1 gaseous contaminants

Selective immobilization of single-atom Au on the specific facets of CeO₂ has been successfully performed by redox etching precipitation (REP), which makes it possible to clearly refine the interfacial effect of multiple-facet support on single atom. With systemic characterizations, it is found that single-atom Au is apt to lie on nonpolar facets of CeO₂ (111) and (110) rather than polar facet of CeO₂ (100). The modification of morphology-dependent properties is attributed to the different interaction between Au atom and each CeO₂ interface. Because of synergy between Au and CeO₂, more oxygen vacancies and more active oxygen species are generated; meanwhile, the interfacial effect stabilizes the charged Au species which serves as active site. Therefore, the performance in catalytic oxidation of HCHO and CO on CeO₂ is facilitated by loading Au. Among them, CeO₂ rod-supported Au as an optimal catalyst exhibits a remarkable activity and stability. With in-situ characterization, the reaction mechanisms for HCHO and CO oxidation over Au/r-CeO₂ are studied. Meanwhile, it is proved that REP strategy is also valid to obviously promote catalytic performance whenever commercial CeO₂ is used or Au is replaced with Ag, so the improvement of recently applied catalyst with REP process is promising.

Reversible oxidation and reduction of gold-supported iron oxide islands at room temperature

Monolayer iron oxides grown on metal substrates have widely been used as model systems in heterogeneous catalysis. By means of ambient-pressure scanning tunneling microscopy (AP-STM), we studied the in situ oxidation and reduction of FeO(111) grown on Au(111) by oxygen (O₂) and carbon monoxide (CO), respectively. Oxygen dislocation lines present on FeO islands are highly active for O₂ dissociation. X-ray photoelectron spectroscopy measurements distinctly reveal the reversible oxidation and reduction of FeO islands after sequential exposure to O₂ and CO. Our AP-STM results show that excess O atoms can be further incorporated on dislocation lines and react with CO, whereas the CO is not strong enough to reduce the FeO supported on Au(111) that is essential to retain the activity of oxygen dislocation lines.

The contributions of distinct Pd surface sites in palladium–ceria catalysts to low-temperature CO oxidation

The low-temperature CO oxidation properties of Pd/CeO₂ catalysts can be correlated with the distribution of PdO_x/Pd–O–Ce species.

Negative Charging of Au Nanoparticles during Methanol Synthesis from CO2 /H2 on a Au/ZnO Catalyst: Insights from Operando IR and Near-Ambient-Pressure XPS and XAS Measurements

The electronic and structural properties of Au/ZnO under industrial and idealized methanol synthesis conditions have been investigated. This was achieved by kinetic measurements in combination with time-resolved operando infrared (DRIFTS) as well as in situ near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) and X-ray absorption near-edge spectroscopy (XANES) measurements at the O K-edge together with high-resolution electron microscopy. The adsorption of CO during the reaction revealed the presence of negatively charged Au nanoparticles/Au sites during the initial phase of the reaction. Near-ambient-pressure XPS and XANES demonstrate the build-up of O vacancies during the reaction, which goes along with a substantial increase in the rate of methanol formation. The results are discussed in comparison with previous findings for Cu/ZnO and Au/ZnO catalysts.

Neutral Au1-Doped Cluster Catalysts AuTi2O3-6 for CO Oxidation by O2

Oxide supported gold catalysts (e.g., Au/TiO₂) are of great significance in heterogeneous catalysis owing to their extraordinary catalytic activity. Study of heteronuclear metal oxide clusters (HMOCs, e.g., Au _xTi _yO _z ^q) is an important way to uncover the molecular-level mechanisms of gold catalysis in the related heterogeneous catalytic systems. However, the current studies of HMOCs are focused on charged clusters with little attention paid to neutral species. The reactivity study of neutral HMOCs is vital to have a comprehensive understanding of heterogeneous catalysis, but it is experimentally challenging because of the difficulty of cluster ionization and detection without fragmentation. Herein, benefiting from a homemade time-of-flight mass spectrometer coupled with a vacuum ultraviolet laser system, the reactivity of neutral Au₁-doped titanium oxide clusters AuTi₂O_3-6 in catalytic CO oxidation by O₂ has been successfully identified. The mechanistic details of the catalysis have been elucidated by quantum chemistry calculations. The crucial roles of the mobile AuCO species that can facilitate not only the process of CO oxidation but also the process of O₂ activation have been discovered in the cluster catalysis. The fascinating results are of substantial importance to understand the mechanisms of CO oxidation over Au/TiO₂, one type of the best studied gold catalysts.

Controlled synthesis of Pd/CoOx–InOx nanofibers for low-temperature CO oxidation reaction

Herein, we report a series of Pd/CoO_x–InO_x nanofibers with different morphologies (such as nanofibers, porous nanofibers and bead-like nanofibers) via electrospinning, annealing and impregnation methods.

A Rational Design of the Sintering-Resistant Au-CeO₂ Nanoparticles Catalysts for CO Oxidation: The Influence of H₂ Pretreatments

The redox pretreatment of samples is one of the crucial ways of altering the catalytic properties of the supported noble metal materials in many heterogeneous reactions. Here, H₂-reducing pretreatment is reported to enhance the thermal stability of Au-CeO₂ catalysts prepared by the deposition–precipitation method and calcination at 600 °C for CO oxidation. In order to understand the improved activity and thermal stability, a series of techniques were used to characterize the physico-chemical changes of the catalyst samples. H₂ pretreatment may lead to: (i) a strong metal–support interaction (SMSI) between Au nanoparticles (NPs) and CeO₂, evidenced by the particular coverage of Au NPs by CeO₂, electronic interactions and CO adsorption changes. (ii) the production of surface bicarbonates which can accelerate CO oxidation. As a result, the H₂ pretreatment makes the Au NPs more resistant to sintering at high temperature and enhances the CO oxidation activity. Furthermore, this reduction pretreatment strategy may provide a potential approach to enhance the thermal-stability of other supported noble metal catalysts.

A Novel Redox Precipitation to Synthesize Au-Doped α-MnO2 with High Dispersion toward Low-Temperature Oxidation of Formaldehyde

A novel method of redox precipitation was applied for the first time to synthesize a Au-doped α-MnO₂ catalyst with high dispersion of the Au species. Au nanoparticles (NPs) can be downsized into approximate single atoms by this method, thereby realizing highly efficient utilization of Au element as well as satisfying low-temperature oxidation of formaldehyde (HCHO). Under catalysis of the optimal 0.25% Au/α-MnO₂ catalyst, a polluted stream containing 500 ppm HCHO can be completely cleaned at 75 °C with the condition of a weight hourly space velocity (WHSV) of 60000 mL/(g h). Meanwhile, the catalyst retains good activity for removal of low-concentration HCHO (about 1 ppm) at ambient temperature with a high WHSV, and exhibits a high tolerance to water and long-term stability. Our characterization of Au/α-MnO₂ and catalytic performance tests clearly demonstrate that the proper amount of Au doping facilitates formation of surface vacancy oxygen, lattice oxygen, and charged Au species as an active site, which are all beneficial to catalytic oxidation of HCHO. The oxidation of HCHO over Au-doped α-MnO₂ catalyst obeys the Mars-van Krevelen mechanism as evidenced by in situ diffuse reflectance infrared Fourier transform spectroscopy.