Boosting photocatalytic oxidative coupling of amines by a Ru-complex-sensitized metal-organic framework

Post-Modification of MOF with Electron Donor for Efficient Photocatalytic Oxidative Organic Transformations

Construction of donor-accepter systems via self-assembling electron donor and acceptor chromophores within one single metal-organic framework (MOF) for advanced artificial photosynthesis is of great intertest yet a major challenge. Herein, an electron donor porphyrin 5-(4-carboxyphenyl)-10,15,20-triphenylporphyrin (PCOOH) was successfully integrated into a highly stable and porous electron acceptor naphthalene diimide (NDI)-based MOF (Zr-NDI) through the postmodified approach of solvent-assisted ligand incorporation (SALI). Benefiting from the efficient photoinduced electron transfer (PET) from the donor PCOOH anchored on the Zr-nodes to the acceptor NDI ligand, which contributes to the abundant generation of reactive oxygen species (ROS) of superoxide radical (O2 •-), the resulting MOF Zr-NDI-PCOOH exhibited superior photocatalytic activities that among the highest levels of MOF-based photocatalysts to aerobic oxidation reactions, including hydroxylation of arylboronic acids and homocoupling of amines. This work exemplifies an avenue to develop high-efficiency MOF-based donor-acceptor systems for advanced artificial photosynthesis through facile post-modified approach.

Imine Synthesis by Engineered d-Amino Acid Oxidase from Porcine Kidney

Various symmetric and asymmetric imines were synthesized using the novel amine oxidase, obtained as variants of d-amino acid oxidase (pkDAO) from porcine kidney (Y228L/R283G) and (I230A/R283G). Active primary imines produced as intermediates in the oxidation of methylbenzylamine (MBA) derivatives were trapped by aliphatic, aromatic amines and diamines as nucleophiles forming new imines. (R)-Fluoro-MBA was the best substrate for symmetric imine synthesis, providing almost stoichiometric conversion (100 mM) and achieving nearly 100% yield. Several (R)-MBA derivatives were used as substrates, and the corresponding symmetric and asymmetric imines were synthesized. The turnover number of N-benzylidenebenzylamine synthesis from benzylamine was calculated to be 1.61 × 105 (number of moles of reactant consumed per mole of catalyst/h), which is more than 103 higher than metal-, photo-, and organo-catalysts reported so far. The diastereomers of bis(1-phenylethyl)amine, the reduced products of (R)-MBA, were identified as a mixture of 84.9% (R,R)-bis(1-phenylethyl)amine and 15.1% (R,S)-bis(1-phenylethyl)amine to consider the reaction mechanism.

Harnessing Solar Power for Oxidation of Organic Compounds by Re(I)Dipyrrinato Complexes

Metal dipyrrinato complexes of 4d and 5d metals have distinctive features such as high absorption coefficients in the visible section and room temperature phosphorescence in the red region. This work demonstrates the light-assisted oxidation of organic compounds employing rhenium(I)dipyrrinato complexes as catalysts. The heavy atom effect in rhenium(I)dipyrrinato complexes leads to the formation of long-lived triplet excited states, and these complexes can generate singlet oxygen in excellent yields (up to 84 %). A method was developed for photocatalytic aerobic oxidation of sulfides and amines using only 0.05 mol % and 0.025 mol % of the rhenium(I)dipyrrinato complexes, respectively. The method is efficient, and within 2 h, a variety of substrates were oxidized to produce sulfoxides and imines in high yields (up to 97 %). Rhenium(I)dipyrrinato complexes work very well both in visible light and sunlight, making them promising candidates for photocatalytic applications.

Hollow CoFe Oxide Prisms for Cross-Dehydrogenative Coupling Reactions of 1,2,3,4-Tetrahydroisoquinolines under Mild Conditions

A three-dimensional hollow CoFe oxide prism catalyst was successfully prepared via a self-template strategy. This bimetallic oxide catalyst demonstrated excellent catalytic activity in cross-dehydrogenative coupling reactions of 1,2,3,4-tetrahydroisoquinolines under mild conditions compared to its monometallic oxide counterparts. A preliminary mechanistic investigation showed the involvement of reactive oxygen species, produced from molecular O2 by the active bimetallic oxide catalyst in the catalytic cycle.

Tailoring flavin-based photosensitizers for efficient photooxidative coupling of benzylic amines

Photooxidative coupling of benzylic amines using naturally abundant O2 as an oxidant under visible light irradiation is an alternative green approach to synthesis imines and is of both fundamental and practical significance. We investigated the photophysical properties of flavin (FL) that is a naturally available sensitizer and its derivatives, i.e. 9-bromoflavin (MB-FL), 7,8-dibromoflavin (DB-FL) and 10-phenylflavin (Ph-FL), as well as the performance of these FL-based sensitizers (FLPSs) in the photooxidative coupling of benzylic amines to imines combining experimental and theoretical efforts. We showed that chemical functionalization with Br and phenyl effectively improves the photophysical properties of these FLPSs, in terms of absorption in the visible light range, singlet oxygen quantum yields, triplet lifetime, etc. Apart from nearly quantitative selectivity for the production of imines, the performance of DB-FL is superior to those of other FLPSs, and it is among the best photocatalysts for imine synthesis. Specifically, 0.5 mol% DB-FL is capable of converting 91% of 0.2 mmol benzylamine and more than 80% of 0.2 mmol fluorobenzylic amine derivatives into their corresponding imines in 5 h batch runs. Mechanistic investigation finely explained the observed photophysical properties of FLPSs and highlighted the dominant role of electron transfer in FLPS sensitized coupling of benzylic amines to imines. This work not only helps to understand the pathways for photocatalysis with FLPSs but also paves the way for the design of novel and efficient PSs to promote organic synthesis.

Incorporating a D-A-D-Type Benzothiadiazole Photosensitizer into MOFs for Photocatalytic Oxidation of Phenylsulfides and Benzylamines

Oxidation and removal of highly toxic sulfides and amines are particularly important for environmental and human security but remain challenging. Here, incorporating an excellent photosensitizer, donor-acceptor-donor (D-A-D)-type 4,4'-(benzo[c][1,2,5]thiadiazole-4,7-diyl)dibenzoic (H2L), into metal-organic frameworks (MOFs) has been manifested to promote the charge separation, affording four three-dimensional (3D) MOFs (isostructural 1-Co/1-Zn with Co2/Zn2 units, and 2-Gd/2-Tb with Gd/Tb-cluster chains) as photocatalysts in the visible light-driven air-O2-mediated catalytic oxidation and removal of hazardous phenylsulfides and benzylamines. Impressively, structure-property correlation illustrated that the transition metal centers assembled in MOFs play an important role in the photocatalytic activity, and we can conclude that 1-Zn can be a robust heterogeneous catalyst possessing good light adsorption and fast charge separation in oxidation removal reactions of both benzylamines and phenylsulfides under visible light irradiation and room temperature with excellent activity/selectivity, stability, and reusability.

Abdelhamid A, Alzamly A. Visible-Light-Driven Photocatalytic Coupling of Neat Benzylamine over a Bi-Ellagate Metal-Organic Framework

Selective aerobic oxidation of benzylamine to N,N-benzylidenebenzylamine was achieved using a bismuth ellagate (Bi-ellagate) metal-organic framework (MOF) under simulated visible light irradiation. The bismuth ellagate photocatalyst was characterized using several spectroscopic techniques: powder X-ray diffraction (PXRD), diffuse reflectance spectroscopy (DRS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), and nitrogen sorption measurements. Product formation was confirmed using ¹H-NMR, ¹³C-NMR, and FTIR. The photocatalytic performance of Bi-ellagate was studied for the first time, which exhibits a band gap value of 2.62 eV, endowing it with a high photocatalytic activity under visible light irradiation. The reaction product, N,N-benzylidenebenzylamine, was selectively obtained with a high conversion yield of ∼96% under solvent-free conditions compared to other control experiments. The Bi-ellagate photocatalyst was recovered and reused four times without any significant loss in its activity, which provides an eco-friendly, low-cost, recyclable, and efficient photocatalyst for potential photocatalytic applications.

Unraveling the photocatalytic electron transfer mechanism in a Ti-MOF/g-C3N4 heterojunction for high-efficient coupling performance of primary amines

An efficient Ti-MOF/g-C3N4 hetero-structure was prepared for the photocatalytic coupling of benzylamine under irradiation with 88% imine yield in 3 h.

Extended phenothiazines: synthesis, photophysical and redox properties, and efficient photocatalytic oxidative coupling of amines

Herein, we successfully developed a ring-fusion approach to extend the conjugation length of phenothiazines that were demonstrated to be efficient photocatalysts for visible-light-driven oxidative coupling reactions of amines under an air atmosphere.

Photocatalytic Hydrogen Evolution Coupled with Production of Highly Value-Added Organic Chemicals by a Composite Photocatalyst CdIn2 S4 @MIL-53-SO3 Ni1/2

Photocatalytic water splitting coupled with the production of highly value-added organic chemicals is of significant importance, which represents a very promising pathway for transforming green solar energy into chemical energy. Herein, we report a composite photocatalyst CdIn₂ S₄ @MIL-53-SO₃ Ni_1/2 , which is highly efficient on prompting water splitting for the production of H₂ in the reduction half-reaction and selective oxidation of organic molecules for the production of highly value-added organic chemicals in the oxidation half-reaction under visible light irradiation. The superior photocatalytic properties of the composite photocatalyst CdIn₂ S₄ @MIL-53-SO₃ Ni_1/2 should be ascribed to coating suspended ion catalyst (SIC), consisting of redox-active Ni^II ions in the anionic pores of coordination network MIL-53-SO₃ ^- , on the surface of photoactive CdIn₂ S₄ , which endows photogenerated electron-hole pairs separate more efficiently for high rate production of H₂ and selective production of highly value-added organic products, demonstrating great potential for practical applications.

Ingenious dual-emitting Ru@UiO-66-NH2 composite as ratiometric fluorescence sensor for detection of mercury in aqueous

The increasing deterioration of ecosystem derived from heavy metals residues brings about the environmental and food contamination, which presses the exploration of facile platform for monitoring heavy metals. Herein, a ratiometric fluorescence sensor was designed for Hg²⁺ detection based on the compound of UiO-66-NH₂ and Ru(bpy)₃²⁺ (Ru@UiO-66-NH₂) which was synthesized by situ encapsulation. The innovative composite displayed two emission peaks at 437 and 604 nm, and the addition of Hg²⁺ could only quench the blue fluorescence due to static quenching and photo-induced electron transfer mechanism, providing an internal standard to promote the precision. Under optimal conditions, the ratiometric Ru@UiO-66-NH₂ probe revealed outstanding anti-interference capability and performed with a great limit of detection (LOD) of 0.053 μM for Hg²⁺, which was 2-fold lower than that of single-color UiO-66-NH₂. By merit of Ru@UiO-66-NH₂, test hydrogels were fabricated to provide a tactics for visual, rapid and on-site detection of Hg²⁺. Additionally, the dual-emitting sensing platform presented satisfactory recoveries and reliabilities in lake water, tap water, and drink water, demonstrating the application potential of this proposed ratiometric fluorescence sensor for monitoring Hg²⁺.

Vinylene-bridged donor–acceptor type porous organic polymers for enhanced photocatalysis of amine oxidative coupling reactions under visible light

Two vinylene-bridged D–A structural POPs are constructed by the electron-rich triarylamine and electron-deficient tricyanomesitylene, which exhibited highly effective photocatalytic activities for aerobic oxidative coupling of amines to imine.

Heterogenisation of polyoxometalates and other metal-based complexes in metal–organic frameworks: from synthesis to characterisation and applications in catalysis

This review provides a thorough overview of composites with molecular catalysts (polyoxometalates, or organometallic or coordination complexes) immobilised into MOFs via non-covalent interactions.

Bi2S3@NH2-UiO-66-S composites modulated by covalent interfacial reactions boost photodegradation and the oxidative coupling of primary amines

The Bi₂S₃@NH₂-UiO-66-S heterostructures have been synthesized via covalent interfacial reactions, exhibiting excellent performance in the photodegradation of methylene and the oxidative coupling of primary amines compared to reported photocatalysts.

Oxygen-deficient bismuth molybdate nanocatalysts: Synergistic effects in boosting photocatalytic oxidative coupling of benzylamine and mechanistic insight

Herein, bismuth molybdate (Bi₂MoO₆) nanocatalysts containing oxygen vacancies (OVs) are found to considerably promote the photocatalytic performance toward oxidative coupling of benzylamine to N-benzylidenebenzylamine under visible light irradiation. The structure-activity relationship for this interesting catalyst is revealed for the first time. The oxygen-deficient Bi₂MoO₆ nanoplatelets (BMO-NPs) are synthesized using ethylene glycol-ethanol solvent mixture as a reaction medium in solvothermal method. A comparison with hydrothermally prepared Bi₂MoO₆ square-like sheets (BMO-SHs) suggests that the nanoplatelets are much smaller in size and contain higher amount of OVs. Benzylamine conversion over the BMO-NPs is ca. 4.0 times higher than that over the BMO-SHs and ca. 3.8 and ca. 34.6 times higher than that over the commercial benchmark TiO₂ P25 and BiVO₄ catalysts, respectively. The BMO-NPs achieve more than 80% product yield within 2 h of irradiation regardless of substituents of benzylamine derivatives. The enhanced activity of BMO-NPs is due to synergistic roles of high surface-to-volume ratio and OVs, providing enlarged active area, extended light absorption range and improved charge separation and transfer efficiency as evidenced from UV-vis DRS, BET surface area, photocurrent response, electrochemical impedance spectroscopy, and time-resolved fluorescence decay measurements. EPR-trapping and radical scavenging experiments indicate O₂^- as a main active species rather than ¹O₂ and a plausible imine formation mechanism via O₂^--assisted charge transfer is proposed accordingly. The work offers an alternative facile preparation method to design efficient semiconductor photocatalysts and for the first time reveals a possible benzylamine coupling mechanism over the oxygen-deficient Bi₂MoO₆ nanocatalyst.

Regioselective Functionalization of the Mesoporous Metal-Organic Framework, NU-1000, with Photo-Active Tris-(2,2'-bipyridine)ruthenium(II)

Solvent-assisted ligand incorporation is an excellent method for the post-synthetic functionalization of Zr-based metal-organic frameworks (MOFs), as carboxylate-derivative functionalities readily coordinate to the Zr6 nodes by displacing node-based aqua and terminal hydroxo ligands. In this study, a photocatalytically active ruthenium complex RuII(bpy)2(dcbpy), that is, bis-(2,2'-bipyridine)-(4,4'-dicarboxy-2,2'-bipyridine)ruthenium, was installed in the mono-protonated (carboxylic acid) form within NU-1000 via SALI. Crystallographic information regarding the siting of the ruthenium complex within the MOF pores is obtained by difference envelope density analysis. The ruthenium-functionalized MOF, termed Ru-NU-1000, shows excellent heterogeneous photocatalytic activity for an oxidative amine coupling reaction.

Non-emissive RuII Polypyridyl Complexes as Efficient and Selective Photosensitizers for the Photooxidation of Benzylamines

Five new Ru^II polypyridyl complexes bearing N-(arylsulfonyl)-8-amidoquinolate ligands and three of their biscyclometalated Ir^III congeners have been prepared and employed as photocatalysts (PCs) in the photooxidation of benzylamines with O₂ . In particular, the new Ru^II complexes do not exhibit photoluminescence, rather they harvest visible light efficiently and are very stable in solution under irradiation with blue light. Their non-emissive behavior has been related to the low electrochemical energy gaps and rationalized on the basis of theoretical calculations (DFT analysis) that predict low S₀ ←T₁ energy values. Moreover, the Ru^II complexes, despite being non-emissive, display excellent activities in the selective photocatalytic transformation of benzylamines into the corresponding imines. The presence of an electron-withdrawing group (-CF3) on the arene ring of the N-(arylsulfonyl)-8-amidoquinolate ligand improves the photocatalytic activity of the corresponding photocatalyst. Furthermore, all the experimental evidence, including transient absorption spectroscopy measurements suggest that singlet oxygen is the actual oxidant. The Ir^III analogues are considerably more photosensitive and consequently less efficient photosensitizers (PSs).

Hierarchically macro-meso-microporous metal-organic framework for photocatalytic oxidation

The macro-meso-microporous and defective metal-organic framework constructed by transition metal Zn and 2,2'-bipyridine-5,5'-carboxylate was synthesized in CO2-expanded solvent. It shows high photocatalytic activity and selectivity for the oxidation of amines to imines under mild conditions, i.e., air as an oxidant, room temperature, and involving no photosensitizer or cocatalyst.

Photosensitive Hybrid Nanostructured Materials: The Big Challenges for Sunlight Capture

Solar radiation is becoming increasingly appreciated because of its influence on living matter and the feasibility of its application for a variety of purposes. It is an available and everlasting natural source of energy, rapidly gaining ground as a supplement and alternative to the nonrenewable energy feedstock. Actually, an increasing interest is involved in the development of efficient materials as the core of photocatalytic and photothermal processes, allowing solar energy harvesting and conversion for many technological applications, including hydrogen production, CO2 reduction, pollutants degradation, as well as organic syntheses. Particularly, photosensitive nanostructured hybrid materials synthesized coupling inorganic semiconductors with organic compounds, and polymers or carbon-based materials are attracting ever-growing research attention since their peculiar properties overcome several limitations of photocatalytic semiconductors through different approaches, including dye or charge transfer complex sensitization and heterostructures formation. The aim of this review was to describe the most promising recent advances in the field of hybrid nanostructured materials for sunlight capture and solar energy exploitation by photocatalytic processes. Beside diverse materials based on metal oxide semiconductors, emerging photoactive systems, such as metal-organic frameworks (MOFs) and hybrid perovskites, were discussed. Finally, future research opportunities and challenges associated with the design and development of highly efficient and cost-effective photosensitive nanomaterials for technological claims were outlined.