2D/1D Zn0.7Cd0.3S p-n heterogeneous junction enhanced with NiWO4 for efficient photocatalytic hydrogen evolution

Defect-mediated Fermi level modulation boosting photo-activity of spatially-ordered S-scheme heterojunction

Spatially-ordered S-scheme photocatalysts are intriguing due to their enhanced light harvesting, spatially isolated redox sites, and strong redox abilities. Nonetheless, heightening the performance of S-scheme photocatalysts via controllable defect engineering is still challenging to now. In this work, multi-armed MoSe2/CdS S-scheme heterojunction with intimate Mo-S bond coupling and adjustable Se vacancies (VSe) and Mo5+ concentrations was constructed, which consisted of few- or even single-layered MoSe2 growing on the {11-20} facets of wurtzite CdS arms. The S-scheme charge transmission mechanism of MoSe2/CdS heterojunction was validated by density functional theory calculation combined with in situ photo-irradiated X-ray photoelectron spectroscopy, surface photovoltage, and radical measurements. Moreover, the Fermi level gap between CdS and MoSe2 was enlarged by regulating the contents of donor (VSe) and acceptor (Mo5+) impurities with synthesis temperature, which strengthens the built-in electric field and carriers transfer driving force of MoSe2/CdS composites, contributing to an outstanding H2 evolution activity of 52.62 mmol·g-1·h-1 (corresponding to an apparent quantum efficiency of 34.8 % at 400 nm) under visible-light irradiation (λ > 400 nm), 25.8 times that of Pt-loaded CdS counterpart and a substantial amount of reported CdS-containing photocatalysts. Our study results are anticipated to facilitate the rational design of advanced semiconductor nanostructures for efficient solar conversion and utilization.

Sonocatalytic degradation of tetracycline hydrochloride using SnO2 hollow-nanofiber decorated with UiO-66-NH2

In this study, a porous hollow nanofiber SnO2 was decorated with UiO-66-NH2 nanoparticles with straightforward solvothermal method and utilized for sonocatalytic degradation of tetracycline (TC) by ultrasonic irradiation (USI). The prepared materials were characterized using different techniques such as SEM, EDS, FTIR, XRD, BET, XPS, UV-DRS, EIS, and zeta potential. SnO2 PHNF/UiO-66-NH2 nanocomposite offered the highest apparent rate constant of 0.0397 min-1 which was 6.3 and 3.1 times higher than those obtained for SnO2 PHNF and UiO-66-NH2, respectively. The integration of nanocomposite components revealed the synergy factor of 1.58, which can be due to the created heterojunctions resulted in efficiently charge carriers separation and retaining high redox ability. The effects of different affecting parameters such as TC initial concentration, pH of the solution, catalyst dosage, trapping agents, and coexisting anions on the catalytic performance were examined. The inhibitory effects of anions were confirmed to be decreased in the sequence of Cl- > NO3- > SO42-, while the sonocatalytic efficiency of the nanocomposite improved considerably in the presence of humic acid and bicarbonate. Also, the excellent performance of the catalyst was preserved during six successive cycles, suggesting the high stability of the prepared catalyst. In addition, based on the scavenger analysis, the created O2·-, OH·, and holes were contributed to the TC degradation. In conclusion, the creation heterojunction is an impressive methodology for improving the sonocatalytic activity of a catalyst, and SnO2 PHNF/UiO-66-NH2 nanocomposite was introduced as a satisfactory catalyst in sonocatalytic degradation of organic contaminants.

Photocatalytic CO2 Reduction to Ethanol by ZnCo2O4/ZnO Janus Hollow Nanofibers

Photocatalytic carbon dioxide (CO2) reduction for high-value hydrocarbon fuel production is a promising strategy to tackle global energy demand and climate change. However, this technology faces formidable challenges, primarily stemming from low yield and poor selectivity of C2 products of the desired hydrocarbon fuels. This study reported ZnO/ZnCo2O4 Janus hollow nanofibers (ZnO/ZCO JHNFs) prepared by electrospinning and atomic layer deposition. Photocatalytic tests revealed an ethanol yield of 4.99 μmol g-1 h-1 for ZnO/ZnCo2O4 JHNFs, surpassing mixed ZnO/ZnCo2O4 nanofibers (ZnO/ZCO NFs) by 4.35 times and pure ZnO by 12.7 times. The selectivity of 58.8% is 2.38 and 4.49 times higher than those of ZnO/ZnCo2O4 NFs and ZnO, respectively. These enhancements are attributed to efficient carrier separation facilitated by the ordered internal electric field of the Z-scheme heterojunction interface, validated by the energy band evaluations from experimentation and density functional theory (DFT) simulations and charge separation characterizations of photocurrent, impedance, and photoluminescence spectra. The Janus structure also effectively exposes the surface of ZnCo2O4 to CO2 molecules, increasing the active site availability, as confirmed by BET nitrogen adsorption/desorption, temperature-programmed desorption tests, and DFT adsorption energy calculations. This study proposes a novel approach for efficient photocatalytic hydrocarbon fuel production, with potential applications in energy and climate crisis mitigation.

Synthesis of magnetic layered double hydroxide (Fe3O4@CuCr-LDH) decorated with ZIF-8 for efficient sonocatalytic degradation of tetracycline

A series of Fe3O4@CuCr-LDH hybrids decorated with different amount of ZIF-8 (FLZ, 10-40 wt%) was prepared using simple methods and characterized with different techniques. The activity of the synthesized nanocomposites was investigated in the sonocatalytic degradation of tetracycline (TC) antibiotic from wastewater. When the content of ZIF-8 in the nanocomposite structure was 20 wt%, the FLZ-20 sonocatalyst exhibited the high performance in the sonocatalytic removal of TC. At optimum conditions (0.7 g/L catalyst dosage, pH of 7, 50 mg/L initial concentration of antibiotic, and 15 min sonication time) of the sonocatalytic removal of TC approached to 91.4% under ultrasonic irradiation (USI) using FLZ-20. This efficiency was much higher than those of obtained results by Fe3O4@CuCr-LDH and pristine ZIF-8. The formed ●OH and ●O2- exhibited the major roles in the sonocatalytic TC degradation process. The excellent performance of FLZ-20 can be attributed to the heterojunctions created between composite components, which could improve the electron transfer ability and effectively separate e-/h+ pairs. In addition, FLZ-20 showed the superior reusability and stability during three successive recycling. Moreover, the facile magnetically separation of the sonocatalyst from the aqueous solution was another outstanding feature, which prevents the formation of secondary pollutants. It can be concluded that the fabrication of heterojunctions is an efficient procedure to promote the sonocatalytic acting of the catalyst.

Rational Design of Three Dimensional Hollow Heterojunctions for Efficient Photocatalytic Hydrogen Evolution Applications

The efficiency of photocatalytic hydrogen evolution is currently limited by poor light adsorption, rapid recombination of photogenerated carriers, and ineffective surface reaction rate. Although heterojunctions with innovative morphologies and structures can strengthen built-in electric fields and maximize the separation of photogenerated charges. However, how to rational design of novel multidimensional structures to simultaneously improve the above three bottleneck problems is still a research imperative. Herein, a unique Cu2O─S@graphene oxide (GO)@Zn0.67Cd0.33S Three dimensional (3D) hollow heterostructure is designed and synthesized, which greatly extends the carrier lifetime and effectively promotes the separation of photogenerated charges. The H2 production rate reached 48.5 mmol g-1 h-1 under visible light after loading Ni2+ on the heterojunction surface, which is 97 times higher than that of pure Zn0.67Cd0.33S nanospheres. Furthermore, the H2 production rate can reach 77.3 mmol g-1 h-1 without cooling, verifying the effectiveness of the photothermal effect. Meanwhile, in situ characterization and density flooding theory calculations reveal the efficient charge transfer at the p-n 3D hollow heterojunction interface. This study not only reveals the detailed mechanism of photocatalytic hydrogen evolution in depth but also rationalizes the construction of superior 3D hollow heterojunctions, thus providing a universal strategy for the materials-by-design of high-performance heterojunctions.

Altass H, Althagafi II, Ahmed SA. Fabrication of Direct Z-Scheme CoNiWO4/Ph-gC3N4 Heterocomposites: Enhanced Photodegradation of Bisphenol A and Anticancer Activity

Photocatalysis is realized by the design of a visible-light-active catalyst with robust redox capacity and broad absorption. In this study, a series of novel Z-scheme CoNiWO4/Ph-gC3N4 photocatalysts are synthesized to improve their redox property and photocatalytic activity toward broad visible light absorption. An intimate stable heterojunction is made between cobalt-nickel tungstate (CoNiWO4) and phenyl-doped graphitic carbon nitride (Ph-gC3N4), and its physicochemical properties are studied. The bifunctional properties of all of the synthesized materials were assessed by studying the decomposition of bisphenol A (BPA) and methyl orange (MO) dye as model pollutants, followed by an evaluation of their anticancer activity on human lung cancer cell lines. The photocatalyst with 20 wt % CoNiWO4 heterocomposite showed an enhanced response toward the removal of cancerous cells. The synthesized pristine CoNiWO4 and Ph-gC3N4 exhibit well-matched band structures and, hence, make it easier to create a Z-scheme heterocomposite. This may increase the lifetime of photoinduced charge carriers with a high redox power, thereby improving their photocatalytic and anticancer activity. An extensive analysis of the mechanism demonstrates that hydroxyl radicals (•OH) and superoxide radical anions (•O2-) are responsible for the degradation of organic compounds via Z-scheme charge transfer approach. These findings point toward a new route for creating effective Co-Ni tungstate-based direct Z-scheme photocatalysts for various redox processes, particularly the mineralization of resistant organic molecules.

Sulfur vacancy and p-n junction synergistically boosting interfacial charge transfer and separation in ZnIn2S4/NiWO4 heterostructure for enhanced photocatalytic hydrogen evolution

Constructing a p-n heterojunction with vacancy is advantageous for speeding up carrier separation and migration due to the synergy of the built-in electric field and electron capture of the vacancy. Herein, a sulfur vacancy riched-ZnIn₂S₄/NiWO₄ p-n heterojunction (VZIS/NWO) photocatalyst was rationally designed and fabricated for photocatalytic hydrogen evolution. The composition and structure of VZIS/NWO were characterized. The existence of sulfur vacancy was confirmed through X-ray photoelectron spectroscopy, high-resolution transmission electron microscope, and electron paramagnetic resonance technology. The p-n heterojunction formed by ZnIn₂S₄ and NiWO₄ was proved to provide a convenient channel to boost interfacial charge migration and separation. By reducing the band gap, the vacancy engineer can improve light absorption as well as serve as an electron trap to improve photo-induced electron-hole separation. Benefiting from the synergy of p-n heterojunction and vacancy, the optimal VZIS/NWO-5 catalyst exhibits dramatically enhanced H₂ generation performance, which is about 10-fold that of the pristine ZnIn₂S₄. This work emphasizes the synergy between p-n heterojunction and sulfur vacancy for enhancing photocatalytic hydrogen evolution performance.

Dual function Mg-doped binary metal ferrite: Photocatalytic degradation of trichlorophenol, bactericidal activity and molecular docking analysis

A new Mg-doped Zn_0.5Ni_0.5Fe₂O₄ (Mg-FZN) photocatalyst was synthesised using a simple co-precipitation-doping technique to develop a dual-function material with the ability to degrade hazardous and refractory pollutants and inactivate bacterial strains. The characterization results revealed that Mg-FZN is an n-type semiconductor with a conduction band of -0.413 eV, an average pore width of 2.32 nm, and a crystal size of 31.45 nm. The photocatalytic activity of Mg-FZN was assessed based on the degradation of 2,4,5-trichlorophenol and achieved 83.8% degradation efficiency under optimised conditions. The radical quenching results revealed that h⁺ significantly contributed to the photodegradation process while ^•OH, and ^•O₂^- played key roles. Additionally, within 60 min, 25 mg of Mg-FZN had bactericidal effects on the bacteria E. coli and S. aureus in both the presence and absence of UV light. Mg-FZN showed H-bonding, electrostatic, and metal-contact interactions with the amino acid residues of the bacterial protein with high binding scores (-4.711 kcal/mol and -5.872 kcal/mol), according to molecular docking.

Enhanced photodegradation of organic contaminants using V-ZnSQDs@TiO2 photocatalyst in an aqueous medium

Vanadium-doped zinc sulfide quantum dots complexed with TiO₂ have been designed using the sol-gel technique and characterized using analytical techniques, such as X-ray diffraction analysis (XRD), UV-Vis diffuse reflectance spectra (DRS), Fourier transforms Infra Red (FTIR), Brunauer-Emmett-Teller analysis (BET), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), and transmission electron microscopy (TEM). The X-ray diffraction analysis of the composite material showed sharp peaks corresponding to both TiO₂ and ZnS_QDs. The FTIR analysis exhibits a strong and broad absorption at 807 cm^-1 indicating the assimilation of vanadium metal in the ZnS_QDs lattice. The DRS spectra showed a bathochromic shift of 25 nm in the synthesized V-ZnS_QDs@TiO₂ composite compared with the pure sample. The photocatalytic performance of the synthesized composite was tested by studying the degradation of two different chromophoric organic dyes, rhodamine B (RhB), methylene blue (MB) and a drug derivative paracetamol (PCM) in aqueous suspension under UV-light illumination. Among the synthesized materials, the composite (V-ZnS_QDs@TiO₂) was established to be more active than the pure ZnS_QDs, TiO₂, and V-ZnS_QDs for the degradation of compounds under investigation. The activity of the synthesized catalyst was also tested for the mineralization of all compounds by measuring the depletion in total organic carbon (TOC) at different irradiation times. The results showed that the catalyst degrades the compounds and mineralizes them efficiently. The primary reactive species involved in the photodegradation reaction were determined by quenching studies, terephthalic acid, and NBT probe methods. A probable mechanistic pathway for the decomposition of compounds has been proposed.

PdS Quantum Dots as a Hole Attractor Encapsulated into the MOF@Cd0.5Zn0.5S Heterostructure for Boosting Photocatalytic Hydrogen Evolution under Visible Light

Herein, a new photocatalyst PdS@UiOS@CZS is successfully synthesized, where thiol-functionalized UiO-66 (UiOS), a metal-organic framework (MOF) material, is used as a host to encapsulate PdS quantum dots (QDs) in its cages, and Cd_0.5Zn_0.5S (CZS) solid solution nanoparticles (NPs) are anchored on its outer surface. The resultant PdS@UiOS@CZS with an optimal ratio between components displays an excellent photocatalytic H₂ evolution rate of 46.1 mmol h^-1 g^-1 under visible light irradiation (420∼780 nm), which is 512.0, 9.2, and 5.9 times that of pure UiOS, CZS, and UiOS@CZS, respectively. The reason for the significantly enhanced performance is that the encapsulated PdS QDs strongly attract the photogenerated holes into the pores of UiOS, while the photogenerated electrons are effectively migrated to CZS due to the heterojunction effect, thereby effectively suppressing the recombination of charge carriers for further high-efficiency hydrogen production. This work provides an idea for developing efficient photocatalysts induced by hole attraction.

Oxygen vacancy and p–n heterojunction in a g-C3N4 nanosheet/CuFeO2 nanocomposite for enhanced photocatalytic N2 fixation to NH3 under ambient conditions

In this article, the nitrogen fixation process over g-C3N4 nanosheets/CuFeO2 p–n heterojunction photocatalyst is presented.

Bi2O2CO3/red phosphorus S-scheme heterojunction for H2 evolution and Cr(VI) reduction

Red phosphorus (RP) has a suitable energy band structure and excellent photocatalytic properties. However, there are some problems, such as low quantum efficiency and serious photogenerated electron-hole recombination. The S-scheme heterostructure shows great potential in facilitating the separation and transfer of photogenerated carriers and obtaining strong photo-redox ability. Herein, hydrothermally treated red phosphorus (HRP) was combined with Bi₂O₂CO₃ to construct Bi₂O₂CO₃/HRP S-scheme heterojunction composite. The Bi₂O₂CO₃ content was optimized, and the 5 %Bi₂O₂CO₃/HRP composite obtained at 5 %Bi₂O₂CO₃ mass fraction exhibited the strongest photoreduction ability. The Cr(VI) photoreduction and photolytic hydrogen production rates were as high as 0.22 min^-1 and 157.2 μmol •h^-1, which were 7.3 and 3.0 times higher than those of HRP, respectively. The promoted photocatalytic activity could be attributed to the formation of S-scheme heterojunctions, which accelerated the separation and transfer of useful photogenerated electron-hole pairs, while enhancing the recombination of relatively useless photogenerated electron-hole pairs, thereby resulting in the highest photocurrent density (17.3 μA/cm²) of the 5 %Bi₂O₂CO₃/HRP composite, which was 1.6 and 4.3 times higher than pure Bi₂O₂CO₃ (10.5 μA/cm²) and pure HRP (4.0 μA/cm²), respectively. This work would provide an advanced approach to enhance the photocatalytic activity of RP.

Amorphous nickel tungstate films prepared by SILAR method for electrocatalytic oxygen evolution reaction

Development of electrocatalyst using facile way from non-noble metal compounds with high efficiency for effective water electrolysis is highly demanding for production of hydrogen energy. Nickel based electrocatalysts were currently developed for electrochemical water oxidation in alkaline pH. Herein, amorphous nickel tungstate (NiWO₄) was synthesized using the facile successive ionic layer adsorption and reaction method. The films were characterized by X-ray diffraction, Raman spectroscopy, Fourier transfer infrared spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, and transmission electron microscopy techniques. The electrochemical analysis showed 315 mV of overpotential at 100 mA cm^-2 with lowest Tafel slope of 32 mV dec^-1 for oxygen evolution reaction (OER) making films of NiWO₄ compatible towards electrocatalysis of water in alkaline media. The chronopotentiometry measurements at 100 mA cm^-2 over 24 h showed 97% retention of OER activity. The electrochemical active surface area (ECSA) of NW120 film was 25.5 cm^-2.

In situ construction of 0D CoWO4 modified 1D Mn0.47Cd0.53S for boosted visible-light photocatalytic H2 activity and photostability

To enhance the photocatalytic activity, loading proper semiconductor with high efficiency and low cost is one of the most valid approaches. Herein, various amounts of CoWO₄ as a novel metal-free material were loaded on Mn_0.47Cd_0.53S (MCS) nanorods for photocatalytic hydrogen production reaction. The CoWO₄/Mn_0.47Cd_0.53S-25 (CW/MCS-25) exhibits the highest hydrogen production rate of 41.53 mmol·h^-1·g^-1 in the Na₂S/Na₂SO₃ system, which is about 2.68 times higher than that of pristine MCS. The Mapping and HRTEM reveals the deposited of CoWO₄ on the MCS. The detailed analyses of XPS, EIS, TRPL spectra and transient photocurrent responses indicate that CoWO₄ and MCS interacted closely and the photogenerated electrons of CoWO₄ can be transferred into MCS. In particular, the introduction of CoWO₄ can further transfer the photogenerated holes of MCS, thereby inhibiting the photocorrosion of MCS and improving photocatalytic activity. This work provides a reference for the exploration of noble metal-free composite material and shows great potential in the photocatalytic application.

Z-scheme heterojunction based on NiWO4/WO3 microspheres with enhanced photocatalytic performance under visible light

The green treatment of dye wastewater has always been a research hotspot in the environmental field. The photocatalytic technology is considered to be a simple and effective strategy to remove dyes in wastewater. A new type of NiWO₄/WO₃ Z-scheme heterojunction microspheres were synthesized by a simple hydrothermal method and impregnation-calcination process. The crystal structure, microscopic morphology, optical and electrochemical properties of the samples were systematically characterized. The photocatalytic activity of methylene blue (MB) was studied by visible light irradiation. The results show that the direct Z-scheme heterojunction formed by NiWO₄/WO₃ effectively reduces the transfer resistance of photogenerated carriers and improves the separation efficiency of photogenerated carriers. The degradation rates of NiWO₄/WO₃-4 Z-scheme heterojunction microspheres to MB dye are 1.8 and 3.2 times higher than that of pure WO₃·2H₂O and WO₃ microspheres, respectively. Combined with the Mott-Schottky curve and the active species capture experiments, a possible Z-scheme photogenerated carrier transfer mechanism is proposed. This study provides a method for the development and design of Z-scheme heterojunction photocatalysts in the field of wastewater purification.

Amorphous Co3O4 quantum dots hybridizing with 3D hexagonal CdS single crystals to construct a 0D/3D p-n heterojunction for a highly efficient photocatalytic H2 evolution

Herein, a novel amorphous monodisperse Co3O4 quantum dots/3D hexagonal CdS single crystals (0D/3D Co3O4 QDs/CdS) p-n heterojunction was constructed by a simple hydrothermal and electrostatic self-assembly method. The amorphous monodispersed Co3O4 QDs (≈4.5 nm) are uniformly and tightly attached to the surface of the hexagonal CdS single crystals. The sample, 0.5% CQDs/CdS exhibits outstanding hydrogen evolution activity of 17.5 mmol h-1 g-1 with a turnover number (TON) of 4214, up to 10.3 times higher than that of pure CdS. The enhanced photocatalytic activity can be attributed to the synergistic effect of the p-n heterostructure and the quantum confinement effect of Co3O4 QDs, which significantly promoted the separation efficiency of photo-generated electrons and holes. Additionally, the sulfur vacancy also can act as electron trappers to improve carrier separation and electron transfer. The photoelectrochemical and time-resolved fluorescence (TRPL) results further certify the effective spatial charge separation. This work gives an insight into the design of the 0D/3D Co3O4 QDs/CdS p-n heterostructure for a highly efficient photocatalysis.

Interface engineering of heterojunction photocatalysts based on 1D nanomaterials

1D nanomaterial-based heterojunctions with unique structures and outstanding physicochemical properties are divided into several types including type II heterojunction, p–n type heterojunction, Schottky junction, Z-type heterojunction, and S-scheme heterojunction.

Eosin Y-sensitized rose-like MoSx and CeVO4 construct a direct Z-scheme heterojunction for efficient photocatalytic hydrogen evolution

MoS_x/CeVO₄ was prepared by a simple hydrothermal method and a direct Z-scheme heterojunction was constructed. The existence of heterojunction provides a special transmission path for electron transfer between two materials.

Hexagonal 2D NiCo-LDO supported on 0D CoWO4 to construct a p–n heterojunction for efficient photocatalytic hydrogen evolution

NiCo-LDO and CoWO4 form a p–n heterojunction, and the synergy between them provides a new hydrogen-producing active center for each.

Novel S-scheme RP/NiCo-LDH composite with remarkably enhanced photocatalytic activity for H2 evolution under visible-light irradiation

A novel red phosphorus/nickel cobalt layered double hydroxide (RP/NiCo-LDH) heterojunction was successfully prepared and exhibited an excellent photocatalytic performance for hydrogen evolution.

A novel p-n Mn0.2Cd0.8S/NiWO4 heterojunction for highly efficient photocatalytic H2 production

Constructing a p-n heterojunction has been regarded as an effective way to restrain charge recombination and boost photocatalytic H2 production activity. Herein, a novel Mn0.2Cd0.8S/NiWO4 composite was fabricated by a hydrothermal process and which exhibited enhanced H2 production activity and excellent photostability. Particularly, the composite with 30 wt% of NiWO4 achieved the optimal H2 production rate of 17.76 mmol g-1 h-1, which was 2.9 times higher than that of Mn0.2Cd0.8S. The increased H2 production property was mainly due to the p-n heterojunction between Mn0.2Cd0.8S and NiWO4, which provided an efficient path for charge transfer and inhibited the photocorrosion of Mn0.2Cd0.8S. This work can offer technical support for the design and development of p-n heterojunctions that can be applied for photocatalytic H2 production.

Ultrasonication-Assisted Synthesis of ZnxCd1−xS for Enhanced Visible-Light Photocatalytic Activity

ZnxCd1−xS as a solid solution photocatalyst has attracted widespread attention for its unique adjustable band gap structure and good and stable performance. A novel synthesis approach for ZnxCd1−xS is still required to further improve its performance. In this study, we synthesized a series of ZnxCd1−xS (x = 0−1) solid solutions via an ultrasonication-assisted hydrothermal route. In comparison with conventional methods of preparation, the sample prepared by our innovative method showed enhanced photocatalytic activity for the degradation of a methyl orange (MO) solution under visible light due to its high crystallinity and small crystallite size. Furthermore, the composition and bandgap of ZnxCd1−xS can be tuned by adjusting the mole ratio of Zn2+/Cd2+. Zn0.3Cd0.7S shows the highest level of activity and stability for the degradation of MO with k = 0.85 h−1, which is 2.2 times higher than that of CdS. The balance between band gap structure-directed redox capacity and light absorption of Zn0.3Cd0.7S accounts for its high photocatalytic performance, both of which are determined by the composition of the solid solution. Also, a degradation mechanism of MO over the sample is tentatively proposed. This study demonstrates a new strategy to synthesize highly efficient sulfide photocatalysts.

CoP nanoparticles as cocatalyst modified the CdS/NiWO4 p–n heterojunction to produce hydrogen efficiently

Generally, cocatalyst modification is an efficient way to enhance the hydrogen evolution performance of visible light irradiation.

An amorphous nickel boride-modified ZnxCd1−xS solid solution for enhanced photocatalytic hydrogen evolution

In this work, the rational design of amorphous Ni_xB as a co-catalyst for the modification of Zn_xCd_1−xS was achieved.

WP modified S-scheme Zn0.5Cd0.5S/WO3 for efficient photocatalytic hydrogen production

In this work, a noble metal free photocatalyst WP/Zn_0.5Cd_0.5S/WO₃ (WZP) was prepared for the first time by simple hydrothermal and physical mixing methods.