Emulsification of oil-in-water emulsions with eggplant (Solanum melongena L.)

Effects of Flammulina velutipes powder on the emulsion properties of chicken myofibrillar protein under low-salt conditions

This study aimed to investigate the influence of varying concentrations of Flammulina velutipes powder (FVP) (0, 4, 8, 12, 16, and 20 g L-1, based on FVP weight per liter of emulsion) on the stability, rheological properties, microstructure, and interfacial protein content of chicken myofibrillar protein (MP) emulsions under low-salt conditions. Visual assessment and the Turbiscan stability index revealed that the stability of MP emulsions improved with increasing FVP concentration. The greatest stability was achieved when the FVP concentration was 16 gL-1. The incorporation of FVP enhanced the elasticity and viscosity of the emulsions by forming a dense three-dimensional network structure. The droplet size of the emulsions initially decreased and then increased with increasing FVP concentration. The addition of FVP increased the amount of protein absorbed by the emulsion layer. Flammulina velutipes powder is promising as a stabilizer that could improve the emulsifying and functional properties of low-salt myofibrillar protein emulsions. © 2024 Society of Chemical Industry.

Effect of the addition of Chachafruto flour on the stability of oil-in-water emulsions and the physicochemical properties of spray-drying microcapsules

This study aimed to assess the suitability of Chachafruto flour (CHF) as a stabilizing agent for an oil-in-water emulsion and its impact on the physicochemical properties of the emulsion after spray drying. Emulsions with varying CHF concentrations (2 %, 3 %, and 4 %) were prepared and compared to a control. The results from the creaming index and particle size (emulsion) analyses indicated that the highest emulsion stability was achieved with 4 %CHF, attributed to its protein content (20.5 %). The encapsulates exhibited spherical and rough surface morphologies but without holes on the surface. Low moisture content (MC < 5 %) and water activity (aw < 0.2) were associated with powder stability. The encapsulates added with CHF showed good reconstitution properties. FTIR confirmed the absence of chemical interactions during the encapsulation process, contributing to the stability. Furthermore, the addition of CHF improved the thermal stability of the encapsulates. This study represents the first investigation on the emulsifying potential of Chachafruto flour.

Wide pH, Adaptable High Internal Phase Pickering Emulsion Stabilized by a Crude Polysaccharide from Thesium chinense Turcz

The ultrasound-assisted extraction conditions of Thesium chinense Turcz. crude polysaccharide (TTP) were optimized, and a TTP sample with a yield of 11.9% was obtained. TTP demonstrated the ability to stabilize high-internal-phase oil-in-water emulsions with an oil phase volume reaching up to 80%. Additionally, the emulsions stabilized by TTP were examined across different pH levels, ionic strengths, and temperatures. The results indicated that the emulsions stabilized by TTP exhibited stability over a wide pH range of 1-11. The emulsion remained stable under ionic strengths of 0-500 mM and temperatures of 4-55 °C. The microstructure of the emulsions was observed using confocal laser scanning microscopy, and the stabilization mechanism of the emulsion was hypothesized. Soluble polysaccharides formed a network structure in the continuous phase, and the insoluble polysaccharides dispersed in the continuous phase, acting as a bridge structure, which worked together to prevent oil droplet aggregation. This research was significant for developing a new food-grade emulsifier with a wide pH range of applicability.

Chemical characterization-function relationship of pectins from persimmon fruit within different ripeness

This study investigated the structural and functional characteristics of two different molecular weight persimmon pectin extracted from unripe persimmon (PP-1) and ripe persimmon (PP-2). The molecular weight was determined as 117.8 kDa and 61.3 kDa for PP-1 and PP-2, which consisting of glucose, rhamnose, mannose, galactose, and xylose. AFM results indicated PP-1 with many linear chains, and short chains in while short chains, branching points, and heterogeneous clumps were found in PP-2.Emulsion characterization and storage stability experiments revealed that PP-1 with more stable emulsifying properties than PP-2 and commercial citrus pectin. In vitro fermentation of PP-1 and PP-2 by gut microbiota indicated that PP-1 and PP-2 groups were higher than inulin group in total SCFAs production after 48 h of fermentation. This study provided useful information for high value utilization of persimmon pectin.

Coconut milk treated by atmospheric cold plasma: Effect on quality and stability

Commercial sterilization plays an important role in extending the shelf-life of coconut milk. However, thermal sterilization affects the quality of coconut milk. This study was initiated to evaluate the effects of atmospheric cold plasma (ACP) treatment on some important quality parameters of coconut milk. ACP treatment had a slight effect on physicochemical characteristics and nutritional ingredients while it obviously reduced the colony count. Furthermore, ACP treatment obviously promoted the formation of lactone, an indispensable volatile substance in coconut milk. Insufficient or moderate ACP treatment had subtle effect on the sensory quality. Notably, moderate ACP treatment reduced the droplet size from 28.0 μm to 18.6 μm, and improved the stability during storage and centrifugation, especially at 60 kV 60 s. Overall, sterilization of coconut milk by ACP at 60 kV 60 s was the most ideal. This study can provide theoretical guidance for the application of ACP in liquid food.

Quality improvement of prerigor salted ground chicken breast with basic amino acids at low NaCl level

The prerigor salting effect is known to provide superior meat processing quality. Based on the urgent need for low salt meat products, the present study was undertaken to evaluate the prerigor salting effect when basic amino acids were introduced at 1% NaCl level. Ground chicken breast meat was salted with NaCl and basic amino acids at 30 min, 60 min, and 90 min postmortem for prerigor treatments. Compared to the 1% NaCl (w/w) treatment, the introduction of 0.06% basic amino acids (w/w) in the prerigor significantly led to an increase in myofibril fragmentation, myofibrillar protein solubility, emulsion activity, storage modulus change rate, gel water-holding capacity and hardness (P < 0.05). Furthermore, smaller and more uniformly sized droplets were produced in emulsion by basic amino acids. Individual basic amino acids had different prerigor salting effects, and it was indicated that basic amino acids could play a positive role in the prerigor salting effect when NaCl was reduced.

Effects of high acyl gellan gum on the rheological properties, stability, and salt ion stress of sodium caseinate emulsion

Sodium caseinate (SC) is widely used as a biological macromolecular emulsifier in oil-in-water (O/W) emulsions. However, the SC-stabilized emulsions were unstable. High-acyl gellan gum (HA) is an anionic macromolecular polysaccharide that improves emulsion stability. This study aimed to investigate the effects of HA addition on the stability and rheological properties of SC-stabilized emulsions. Study results revealed that HA concentrations >0.1 % could increase Turbiscan stability, reduce the volume average particle size, and increase the zeta-potential absolute value of the SC-stabilized emulsions. In addition, HA increased the triple-phase contact angle of SC, transformed SC-stabilized emulsions into non-Newtonian fluids, and effectively inhibited the movement of emulsion droplets. The effect of 0.125 % HA concentration was the most effective, allowing SC-stabilized emulsions to maintain good kinetic stability over a 30-d period. NaCl destabilized SC-stabilized emulsions but had no significant effect on HA-SC emulsions. In summary, HA concentration had a significant effect on the stability of SC-stabilized emulsions. HA altered the rheological properties and reduced creaming and coalescence by forming a three-dimensional network structure, increasing the electrostatic repulsion of the emulsion and the adsorption capacity of SC at the oil-water interface, and thereby improving the stability of SC-stabilized emulsions during storage and in the presence of NaCl.

Determination of the Emulsion Stabilization Mechanisms of Quaternized Glucan of Curdlan via Rheological and Interfacial Characterization

Interfacial-active quaternized glucan of curdlan (QCD) with different degrees of substitution (DS) was prepared and used as stabilizers of oil-in-water (O/W) emulsions at different concentrations. The adsorption behavior of QCDs, rheology of bulk emulsions and interfacial films, emulsion morphology, and stability were investigated. The emulsifying capacity of QCD was essentially related to the viscoelastic features of the interfacial film and the continuous phase and the electrostatic repulsion among oil droplets. QCD molecules with different DS form structurally different interfacial films. The high-DS QCD formed a viscously predominant interfacial film with certain hydrophobicity, whereas the low-DS QCD molecules formed an elastically predominant film characterized by hydrogen bonds among adsorbed chains. The structuralization of low-DS QCD molecules through physical cross-linking in bulk and interfacial films at high concentrations was conducive to emulsion stability. Excess QCD chains in the bulk formed a weak gel-like network, further hindering the movement of droplets in the emulsions. Relevant emulsification and stability mechanisms were proposed. Finally, the stability of curcumin encapsulated in O/W emulsions was evaluated.

Mechanism of improving emulsion stability of emulsion-type sausage with oyster mushroom (Pleurotus ostreatus) powder as a phosphate replacement

This research evaluated the potentiality of oyster mushroom powder (OMP) as a phosphate alternative by improving emulsion stability of emulsion-type sausage. Sausage without phosphate (NC), with 0.2% sodium triphosphate (PC), and with 1 and 2% OMP (M1 and M2) were prepared. The OMP addition improved the physicochemical properties of sausage, effectively prevented lipid oxidation, and delayed the growth of aerobic bacteria during 28 days of cold storage compared to NC. The M1 and M2 improved the emulsion stability similar to PC. M2 had the highest water holding capacity and apparent viscosity and the lowest cooking loss (P < 0.05). The addition of OMP resulted in different textural characteristics from that of phosphate due to the formation of emulsion structures randomly entrapped by filament-like components, which were derived from polysaccharides or the conjugates between polysaccharides and proteins. According to the results of this study, emulsion stability promoted by OMP was mainly due to the polysaccharides, which are involved in enhancing viscosity and steric hindrance.

Naturally occurring protein/polysaccharide hybrid nanoparticles for stabilizing oil-in-water Pickering emulsions and the formation mechanism

In this study, we reported for the first time that the natural protein/polysaccharide hybrid nanoparticles (PPH NPs) with a diameter of ∼ 129 nm, originating from Lactobacillus plantarum fermented cheese whey, could act as green-based NPs for stabilizing Pickering emulsions. Characterizations of PPH NPs showed that the negative-charged PPH NPs were composed of ∼ 37.7% total protein and ∼ 7.3% polysaccharide bearing several functional groups, such as -OH, -NH, -COOH, etc.; and displayed excellent emulsifying capacity in preparing oil-in-water Pickering emulsions. The obtained emulsions exhibited gel-like behavior with excellent stability against the variation of pH, ionic strength, and temperature. Confocal observations showed that PPH NPs effectively adsorbed and anchored at the oil-water interface, thus creating the steric hindrance to inhibit droplet coalescence. This research is of importance in developing novel and biocompatible Pickering stabilizers with outstanding performance, as well as enable a versatile design of stable Pickering emulsions suitable for food industries.

Surface Design for Antibacterial Materials: From Fundamentals to Advanced Strategies

Healthcare-acquired infections as well as increasing antimicrobial resistance have become an urgent global challenge, thus smart alternative solutions are needed to tackle bacterial infections. Antibacterial materials in biomedical applications and hospital hygiene have attracted great interest, in particular, the emergence of surface design strategies offer an effective alternative to antibiotics, thereby preventing the possible development of bacterial resistance. In this review, recent progress on advanced surface modifications to prevent bacterial infections are addressed comprehensively, starting with the key factors against bacterial adhesion, followed by varying strategies that can inhibit biofilm formation effectively. Furthermore, "super antibacterial systems" through pre-treatment defense and targeted bactericidal system, are proposed with increasing evidence of clinical potential. Finally, the advantages and future challenges of surface strategies to resist healthcare-associated infections are discussed, with promising prospects of developing novel antimicrobial materials.

Migration of Avocado Virgin Oil Functional Compounds during Domestic Cooking of Eggplant

Avocado virgin oil (AVO) was used during eggplant deep-frying, boil, and boil in a water-oil mixture (W/O). There were measured the contents of moisture, dry matter, fat, total (TPC) and ten individual phenols, antioxidant activity (ABTS and DPPH), and total sterols; as well as the profiles of eight fatty acids and fourteen sterols/stanols. The values of raw and processed foods were compared and studied with multivariate analysis. The antioxidant capacity of AVO lowered after deep frying but augmented in eggplant and water after all treatments. The TPC was steady in AVO and raised in fried eggplant. Thermal treatments added to the initial profiles of the AVO, eggplant and water, nine, eight, and four phenols, respectively. Percentages of the main fatty acids (oleic, palmitic and linoleic), and sterols (β-sitosterol, campesterol, and Δ5-avenasterol), remained unchanged between the raw and treated AVO; and the lipidic fractions from processed eggplant. Cooking leads to the movement of hydrophilic and lipophilic functional compounds between AVO, eggplant and water. Migration of sterols and unsaturated fatty acids from AVO to eggplant during deep frying and W/O boiling improved the functional properties of eggplant by adding the high biological value lipophilic fraction to the naturally occurring polyphenols.

Effect of Eggplant Powder on the Physicochemical and Sensory Characteristics of Reduced-Fat Pork Sausages

In this study, we investigated the effects of soybean oil, water, and 1, 2, and 3% eggplant powder (EP) as substitutes for pork back fat (a decrease from 30% to 15%) on the proximate composition, water- and fat-binding properties, colour, water distribution, texture, and sensory properties of pork sausages. The replacement of fat with soybean oil in sausages decreased the fat and cholesterol proportions and increased the moisture content, but the water- and fat-binding properties, texture properties, and sensory properties became worse. By adding EP, sausages displayed remarkably better water- and fat-binding properties, texture properties, and sensory properties. Moreover, EP addition significantly accelerated T₂ relaxation time, increased the immobilised water content, and decreased the free water content of sausages. Sausages with 2% EP had the highest flavour, mouthfeel, and overall acceptability. This work provides theoretical and data support for the preparation of sausages with EP rich in unsaturated fatty acids (UFAs) and dietary fibre.

Coalescence and spreading of drops on liquid pools

HYPOTHESIS

Oil spills have posed a serious threat to our marine and ecological environment in recent times. Containment of spills proliferating via small drops merging with oceans/seas is especially difficult since their mitigation is closely linked to the coalescence dependent spreading. This inter-connectivity and its dependence on the physical properties of the drop has not been explored until now. Furthermore, pinch-off behavior and scaling laws for such three-phase systems have not been reported.

EXPERIMENTS

We investigate the problem of gentle deposition of a single drop of oil on a pool of water, representative of an oil spill scenario. Methodical study of 11 different n-alkanes, polymers and hydrocarbons with varying viscosity and initial spreading coefficients is conducted. Regime map, scaling laws for deformation features and spreading behavior are established.

FINDINGS

The existence of a previously undocumented regime of delayed coalescence is reported. A novel application of the inertia-visco-capillary (I-V-C) scale collapses all experimental coalescence data on a single line while the early stage spreading is found to be either oscillatory or asymptotically reaching a constant value, depending on the viscosity of the oil drop unlike the well documented monotonic, power law late-time spreading behavior. These findings are equally applicable to applications like emulsions and enhanced oil recovery.