Blade-like structure of graphene oxide sheets decorated with cuprous oxide and silicon carbide nanocomposites as bactericidal materials

Comparative study between three carbonaceous nanoblades and nanodarts for antimicrobial applications

The design of nanostructured materials occupies a privileged position in the development and management of affordable and effective technology in the antibacterial sector. Here, we discuss the antimicrobial properties of three carbonaceous nanoblades and nanodarts materials of graphene oxide (GO), reduced graphene oxide (RGO), and single-wall carbon nanotubes (SWCNTs) that have a mechano-bactericidal effect, and the ability to piercing or slicing bacterial membranes. To demonstrate the significance of size, morphology and composition on the antibacterial activity mechanism, the designed nanomaterials have been characterized. The minimum inhibitory concentration (MIC), standard agar well diffusion, and transmission electron microscopy were utilized to evaluate the antibacterial activity of GO, RGO, and SWCNTs. Based on the evidence obtained, the three carbonaceous materials exhibit activity against all microbial strains tested by completely encapsulating bacterial cells and causing morphological disruption by degrading the microbial cell membrane in the order of RGO > GO > SWCNTs. Because of the external cell wall structure and outer membrane proteins, the synthesized carbonaceous nanomaterials exhibited higher antibacterial activity against Gram-positive bacterial strains than Gram-negative and fungal microorganisms. RGO had the lowest MIC values (0.062, 0.125, and 0.25 mg/mL against B. subtilis, S. aureus, and E. coli, respectively), as well as minimum fungal concentrations (0.5 mg/mL for both A. fumigatus and C. albicans). At 12 hr, the cell viability values against tested microbial strains were completely suppressed. Cell lysis and death occurred as a result of severe membrane damage caused by microorganisms perched on RGO nanoblades. Our work gives an insight into the design of effective graphene-based antimicrobial materials for water treatment and remediation.

Impact of alternate Mn doping in ternary nanocomposites on their structural, optical and antimicrobial properties: Comparative analysis of photocatalytic degradation and antibacterial activity

The present study was done to investigate and compare the photocatalytic and antibacterial activity of two in situ Manganese doped ternary nanocomposites. The dual ternary hybrid systems comprised Mn-doped Ag₂WO₄ coupled with MoS₂-GO and Mn-doped MoS₂ coupled with Ag₂WO₄-GO. Both hierarchical alternate Mn-doped ternary heterojunctions formed efficient plasmonic catalysts for wastewater treatment. The novel nanocomposites were well-characterized using XRD, FTIR, SEM-EDS, HR-TEM, XPS, UV-VIS DRS, and PL techniques confirming the successful insertion of Mn⁺² ions in respective host substrates. The bandgap of the ternary nanocomposites evaluated by the tauc plot showed them visible light-active nanocomposites. The photocatalytic ability of both Mn-doped coupled nanocomposites was investigated against the dye methylene blue. Both ternary nanocomposites showed excellent sunlight harvesting ability for dye degradation in 60 min. The maximum catalytic efficiency of both photocatalysts was obtained at a solution pH value of 8, photocatalyst dose and oxidant dose of 30 mg/100 mL and 1 mM for Mn-Ag₂WO₄/MoS₂-GO, 50 mg/100 mL, 3 mM for Mn-MoS₂/Ag₂WO₄-GO keeping IDC of 10 ppm for all photocatalysts. The nanocomposites showed excellent photocatalytic stability after five successive cycles. The response surface methodology was used as a statistical tool for the evaluation of the photocatalytic response of several interacting parameters for dye degradation by ternary composites. The antibacterial activity was determined by the inactivation of gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli) bacteria by support-based doped ternary hybrids.

Synthesis and characterization of Ag2O, CoFe2O4, GO, and their ternary composite for antibacterial activity

Currently, nanomaterials with exceptional antibacterial activity have become an emerging domain in research. The optimization of nanomaterials against infection causing agents is the next step in dealing with the present-day problem of antibiotics. In this research work, Ag₂O, CoFe₂O₄, and Ag₂O/CoFe₂O₄/rGO are prepared by chemical methods. Ag₂O was prepared by co-precipitation method, while solvothermal technique was utilized for the synthesis of CoFe₂O₄. The ternary nanocomposite was synthesized by a simple in situ reduction using a two-step approach. The structural and morphological properties were studied by UV-Vis spectroscopy, X-ray diffraction spectroscopy (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (SEM), dynamic light scattering (DLS), and Fourier-transform infrared spectroscopy (FTIR). From the X-ray diffraction analysis, the crystallite size is found to be 14 nm, 5 nm, and 6 nm for Ag₂O, CoFe₂O₄, and Ag₂O/CoFe₂O₄/rGO respectively. The synthesized nanomaterials were investigated for antibacterial activities against gram-positive strain Staphylococcus aureus (S. aureus) and gram-negative strain Escherichia coli (E. coli) using Agar well diffusion method. Ag₂O and CoFe₂O₄ showed zones of inhibition (ZOI) of 13 mm and 11 mm against gram positive bacteria while 12 mm against gram negative bacteria respectively, while ternary nanocomposite showed 14 mm and 13 mm of ZOI. The antibacterial activity of nanomaterials showed a gradual increment with an increase in the concentration of the materials. Ag₂O, CoFe₂O₄, and Ag₂O/CoFe₂O₄/rGO showed minimum inhibitory concentration (MIC) values of 4.5, 6.5, and 4.5 μg/mL for S. aureus and 6.5, 7.2, and 4.8 μg/mL for E. coli respectively. Minimum bactericidal concentrations were found to be same as the MIC values. Additionally, a time-kill curve analysis was performed and for ternary nanocomposite; the killing response was most effective as the complete killing was achieved at 3 h of incubation at 3-MIC (9.75 μg/mL). These results demonstrate that all the nanomaterials, as a kind of antibacterial material, have a great potential for a wide range of biomedical applications.

A double-edged effect of manganese-doped graphene quantum dots on salt-stressed Capsicum annuum L

The objective of the current study is to evaluate both the positive and negative effects of manganese-doped graphene quantum dots (GQD-Mn) on Capsicum annuum L. grown under salt stress. GQD-Mn was synthesized, characterized, and foliar-applied (250 mg/L, 120 mg/L, 60 mg/L) to C. annuum L. before and after the flowering stage, during which 100 mM of NaCl solution was introduced into the soil as salt stress. Controls were designed as absolute control (no nanomaterials or salt) and negative control (no nanomaterials only salt). Herein, we report that GQD-Mn offset the reduction of fruit production in salt-stressed C. annuum L. by around 40 %. However, based on a comprehensive analysis of normal alkanes (n-alkane) using gas chromatography-mass spectrometry (GC-MS), we also observed that the leaf epicuticular wax profile was disturbed by GQD-Mn, as the concentration of long-chain n-alkanes was increased. Meanwhile, the content of magnesium (Mg) and zinc (Zn) indicated a potential promoted photosynthesis activity in C. annuum L leaves. We hypothesize that the optical properties of GQD-Mn allow leaves to utilize light more efficiently, thus improving photosynthetic activities in plants to acclimate salt stress. But the increased light usage also induced heat stress on the leaf surfaces, which caused n-alkanes changes. Our results provided a unique perspective on nano-plant interaction that value both beneficial and toxic effects of nanomaterials, especially when evaluating the safety of nano-enabled agriculture in areas facing harsh environmental conditions such as salinity.

Pyrolysis gas from biomass and plastics over X-Mo@MgO (X = Ni, Fe, Co) catalysts into functional carbon nanocomposite: Gas reforming reaction and proper process mechanisms

The metal catalysts X-Mo@MgO (X = Ni, Fe, Co) was studied as excellent catalyst for catalytic pyrolysis conversion of biomass and plastics into functional carbon nanocomposite. The proper reaction mechanism of the process was explored through the gas composition, and explored the bactericidal performance of functional carbon nanocomposite. The results showed that the Ni, Fe and Co-based catalysts elevated H₂ gas yield reached to 57%, 34% and 44% as the addition of Mo, due to Mo or its oxide species for scission of small molecule compound. The introduction of NiMo@MgO catalyst produced lower CH₄, and higher H₂ and MWCNTs, which indicated that the formation of MWCNTs is mainly attributed to CH₄ dehydrogenation. As a comparison, FeMo@MgO catalyst for CO disproportionation reaction could generate more MWCNTs and lower H₂. The functional carbon nanocomposite from FeMo@MgO catalyst were comprehensively evaluated by multiple characterizations. TPO and Raman results confirmed that FeMo@MgO catalyst can provide an excellent carrier to generate MWCNTs with few defects and high graphitization. The functional carbon nanocomposite were initially applied to E.coli extinguishing. The core-shell structure catalyst not only has excellent bactericidal performance, but also has strong resistance to metal leaching.

Diclofenac degradation by activating peroxydisulfate via well-dispersed GO/Cu2O nano-composite

Owing to high treatment efficiency under neutral condition and no extra energy required, copper-mediated activation of persulfate (PS) has been widely used for the degradation of refractory organic pollutants in water. The dispersion stability of copper nanoparticle in water, however, remains a great challenge. Meanwhile, chemical oxidative modification of graphene oxide (GO) can improve the dispersion stability of GO in water. In this paper, cuprous oxide (Cu₂O) was deposited on the surface of GO. GO/Cu₂O nano-composites with different mass ratios, i.e., m(GO):m(Cu₂O) of 1:2, 1:5, 1:10, and 1:25, were prepared. When m(GO):m(Cu₂O) was 1:2, the amount of GO/Cu₂O nano-composite was 1.00 g/L and C_PDS:C_DCF was 15:1, and the catalytic degradation rate of diclofenac (DCF) was up to 90%. Corresponding physicochemical properties of the resulting samples were comprehensively characterized by using SEM, TEM, XRD, Raman, FT-IR, and XPS. DCF degradation by activating peroxydisulfate (PDS) via GO/Cu₂O nano-composite was also investigated in detail. It is found that the synergistic effect, namely GO adsorption and multivalent copper ion electron transfer, makes GO/Cu₂O nano-composite reveal higher reactivity. Moreover, GO/Cu₂O nano-composite possesses good stability in consecutive cycling test. EPR analyses shows that ·OH and SO₄^·- radicals are involved in DCF degradation. It is indicated that the DCF degradation process contain hydroxylation and the cleavage of C-N bond, which is explored by GC-MS. In our research, well-dispersed GO/Cu₂O nano-composite with high capacity and good cycling stability was fabricated successfully. Compared with pure Cu₂O nanoparticle, GO/Cu₂O nano-composite exhibits the better performance for DCF removal. A novel well-dispersed cuprous oxide (Cu₂O) deposited on surface of GO was fabricated with high catalytic performance. Its heterogeneous activation of peroxydisulfate (PDS) for diclofenac (DCF) degradation was investigated. GO/Cu₂O nano-composite was proved high capacity and good cycling stability. Meanwhile, the possible DCF degradation pathway was explored. Compared with pure Cu₂O nanoparticle, GO/Cu₂O nano-composite exhibits better performance for DCF removal.

GO-based antibacterial composites: Application and design strategies

Graphene oxide (GO), for its unique structure with high biocompatibility and designability, is widely used in the antibacterial field. Various strategies have been designed to fabricate GO-based composites with antibacterial properties. This review summarized these strategies, divided them into three types and interpreted their antibacterial mechanisms: (i) "GO*/non-GO" type in which GO acts as the single antibacterial core, (ii) "GO*/non-GO*" type in which GO and non-GO components function synergistically as dual antibacterial cores, (iii) "GO/non-GO*" type in which non-GO acts as the single antibacterial core, while GO component plays a supportive, not a dominant role in antibiosis. Besides, the fields suiting their applications and factors influencing their antibacterial properties were analyzed. Finally, the limitations and prospects in the current researches were discussed. In summary, GO-based composites have revolutionized antibacterial strategies. This review may serve as a reference to inspire further research on GO-based antibacterial composites.

An N-Halamine/Graphene Oxide-Functionalized Electrospun Polymer Membrane That Inactivates Bacteria on Contact and by Releasing Active Chlorine

The emergence of antibiotic-resistant "superbugs" in recent decades has led to widespread illness and death and is a major ongoing public health issue. Since traditional antimicrobials and antibiotics are in many cases showing limited or no effectiveness in fighting some emerging pathogens, there is an urgent need to develop and explore novel antibacterial agents that are both powerful and reliable. Combining two or more antibiotics or antimicrobials has become a hot topic in antibacterial research. In this contribution, we report on using a simple electrospinning technique to create an N-halamine/graphene oxide-modified polymer membrane with excellent antibacterial activity. With the assistance of advanced techniques, the as-obtained membrane was characterized in terms of its chemical composition, morphology, size, and the presence of active chlorine. Its antibacterial properties were tested with Escherichia coli (E. coli) as the model bacteria, using the colony-counting method. Interestingly, the final N-halamine/graphene oxide-based antibacterial fibrous membrane inactivated E. coli both on contact and by releasing active chlorine. We believe that the synergistic antimicrobial action of our as-fabricated fibrous membrane should have great potential for utilization in water disinfection, air purification, medical and healthcare products, textile products, and other antibacterial-associated fields.

Progress and Prospects on the Fabrication of Graphene-Based Nanostructures for Energy Storage, Energy Conversion and Biomedical Applications

Graphene, a two-dimensional (2D) layered material has attracted much attention from the scientific community due to its exceptional electrical, thermal, mechanical, biological and optical properties. Hence, numerous applications utilizing graphene-based materials could be conceived in next-generation electronics, chemical and biological sensing, energy conversion and storage, and beyond. The interaction between graphene surfaces with other materials plays a vital role in influencing its properties than other bulk materials. In this review, we outline the recent progress in the production of graphene and related 2D materials, and their uses in energy conversion (solar cells, fuel cells), energy storage (batteries, supercapacitors) and biomedical applications.