Interlaboratory comparison of centrifugal ultrafiltration with ICP-MS detection in a first-step towards methods to screen for nanomaterial release during certification of drinking water contact materials

A key requirement for evaluating the safety of nano-enabled water treatment devices is measuring concentrations of insoluble nanomaterials released from devices into water that may be ingested by consumers. Therefore, there is a need for simple technique that uses commonly available commercial laboratory techniques to discriminate between nanoparticles and dissolved by-products of the nanomaterial (e.g., ionic metals). Such capabilities would enable screening for particulate or dissolved metals released into water from nanomaterial-containing drinking water contact materials (e.g., paint coatings) or devices (e.g., filters). This multi-laboratory study sought to investigate the use of relatively inexpensive centrifugal ultrafilters to separate nanoparticulate from ionic metal in combination with inductively-coupled plasma mass spectrometry (ICP-MS) detection. The accuracy, precision, and reproducibility for the proposed method were assessed using mixtures of nanoparticulate and ionic gold (Au) in a standard and widely utilized model water matrix (NSF International Standard 53/61). Concentrations for both ionic and nanoparticulate gold based upon measurements of Au mass in the initial solutions and Au permeating the centrifugal ultrafilters. Results across different solution compositions and different participating labs showed that ionic and nanoparticulate Au could be consistently discriminated with ppb concentrations typically resulting in <10 % error. A mass balance was not achieved because nanoparticles were retained on membranes embedded in plastic holders inside the centrifuge tubes, and the entire apparatus could not be acid and/or microwave digested. This was a minor limitation considering the ultrafiltration method is a screening tool, and gold concentration in the permeate indicates the presence of ionic metal rather than nanoforms. With further development, this approach could prove to be an effective tool in screening for nanomaterial release from water-system or device materials as part of third-party certification processes of drinking water compatible products.

Surface-Charge-Driven Ferroptosis and Mitochondrial Dysfunction Is Involved in Toxicity Diversity in the Marine Bivalve Exposed to Nanoplastics

Nanoplastics (NPs) pervade daily life, posing serious threats to marine ecosystems. Despite the crucial role that surface charge plays in NP effects, there is a substantial gap in our understanding of how surface charge influences NP toxicity. Herein, by exposing Ruditapes philippinarum (R. philippinarum) to both positively charged NPs (p-NPs) and negatively charged NPs (n-NPs) at environmentally relevant particle number levels for a duration of 35 days, we unequivocally demonstrate that both types of NPs had discernible impacts on the clams depending on their surface charge. Through transcriptomic and proteomic analyses, we unveiled the primary mechanisms behind p-NP toxicity, which stem from induced mitochondrial dysfunction and ferroptosis. In contrast, n-NPs predominantly stimulated innate immune responses, influencing salivary secretion and modulating the complement and coagulation cascades. Furthermore, in vitro tests on clam immune cells confirmed that internalized p-NPs triggered alterations in mitochondrial morphology, a decrease in membrane potential, and the initiation of ferroptosis. Conversely, n-NPs, to a certain extent, moderated the expression of genes related to immune responses, thus mitigating their adverse effects. Taken together, these findings indicate that the differential surface-charge-driven ferroptosis and mitochondrial dysfunction in clams play a critical role in the toxicity profile of NPs, providing an insightful reference for assessing the ecological toxicity associated with NPs.

Dynamic Light Scattering and Its Application to Control Nanoparticle Aggregation in Colloidal Systems: A Review

Colloidal systems and their control play an essential role in daily human activities, but several drawbacks lead to an avoidance of their extensive application in some more productive areas. Some roadblocks are a lack of knowledge regarding how to influence and address colloidal forces, as well as a lack of practical devices to understand these systems. This review focuses on applying dynamic light scattering (DLS) as a powerful tool for monitoring and characterizing nanoparticle aggregation dynamics. We started by outlining the core ideas behind DLS and how it may be used to examine colloidal particle size distribution and aggregation dynamics; then, in the last section, we included the options to control aggregation in the chemically processed toner. In addition, we pinpointed knowledge gaps and difficulties that obstruct the use of DLS in real-world situations. Although widely used, DLS has limits when dealing with complicated systems, including combinations of nanoparticles, high concentrations, and non-spherical particles. We discussed these issues and offered possible solutions and the incorporation of supplementary characterization approaches. Finally, we emphasized how critical it is to close the gap between fundamental studies of nanoparticle aggregation and their translation into real-world applications, recognizing challenges in colloidal science.

Surface functional groups and biofilm formation on microplastics: Environmental implications

Microplastics (MPs) contamination is becoming a significant environmental issue, as the widespread omnipresence of MPs can cause many adverse consequences for both ecological systems and humans. Contrary to what is commonly thought, the toxicity-inducing MPs are not the original pristine plastics; rather, they are completely transformed through various surface functional groups and aggressive biofilm formation on MPs via aging or weathering processes. Therefore, understanding the impacts of MPs' surface functional groups and biofilm formation on biogeochemical processes, such as environmental fate, transport, and toxicity, is crucial. In this review, we present a comprehensive summary of the distinctive impact that surface functional groups and biofilm formation of MPs have on their significant biogeochemical behavior in various environmental media, as well as their toxicity and biological effects. We place emphasis on the role of surface functional groups and biofilm formation as a means of influencing the biogeochemical processes of MPs. This includes their effects on pollutant fate and element cycling, which in turn impacts the aggregation, transport, and toxicity of MPs. Ultimately, future research studies and tactics are needed to improve our understanding of the biogeochemical processes that are influenced by the surface functional groups and biofilm formation of MPs.

Seed Priming with Reactive Oxygen Species-Generating Nanoparticles Enhanced Maize Tolerance to Multiple Abiotic Stresses

Climate change-induced extreme weather events (heat, cold, drought, and flooding) will severely affect crop production. Increasing the resilience of crops to fluctuating environmental conditions is critically important. Here, we report that nanomaterials (NMs) with reactive oxygen species (ROS)-generating properties can be used as seed priming agents to simultaneously enhance the tolerance of maize seeds and seedlings to diverse and even multiple stresses. Maize seeds primed with 40 mg/L silver nanoparticles (AgNPs) exhibited accelerated seed germination and an increased germination rate, greater seedling vigor, and better seedling growth under drought (10% and 20% PEG), saline (50 and 100 mM NaCl), and cold (15 °C) stress conditions, indicating enhanced resilience to diverse stresses. Importantly, maize resistance to simultaneous multiple stresses (drought and cold, drought and salt, and salt and cold) was markedly enhanced. Under drought conditions, seed priming significantly boosted root hair density and length (17.3-82.7%), which enabled greater tolerance to water deficiency. RNA-seq analysis reveals that AgNPs seed priming induced a transcriptomic shift in maize seeds. Plant hormone signal transduction and MAPK signaling pathways were activated upon seed priming. Importantly, low-cost and environmentally friendly ROS-generating Fe-based NMs (Fe2O3 and Fe3O4 NPs) were also demonstrated to enhance the resistance of seeds and seedlings to drought, salt, and cold stresses. These findings demonstrate that a simple seed priming strategy can be used to significantly enhance the climate resilience of crops through modulated ROS homeostasis and that this approach could be a powerful nanoenabled tool for addressing worsening food insecurity.

Dynamic interplay between nano-enabled agrochemicals and the plant-associated microbiome

The plant-associated microbiome is known to be a critical component for crop growth, nutrient acquisition, resistance to pathogens, and abiotic stress tolerance. Conventional approaches have been attempted to manipulate the plant-soil microbiome to improve plant performance; however, several issues have arisen, such as collateral negative impacts on microbiota composition. The lack of reliability and robustness of conventional techniques warrants efforts to develop novel alternative strategies. Nano-enabled approaches have emerged as promising platforms for enhancing agricultural sustainability and global food security. Specifically, the use of engineered nanomaterials (ENMs) as nanoscale agrochemicals has great potential to modulate the plant-associated microbiome. We review the dynamic interplay between nano-agrochemicals and the plant-associated microbiome for the safe development and use of nano-enabled microbiome engineering.

Mechanistic Insight into the Internalization, Distribution, and Autophagy Process of Manganese Nanoparticles in Capsicum annuum L.: Evidence from Orthogonal Microscopic Analysis

Orthogonal techniques were used to track manganese nanoparticles (MnNPs) in Capsicum annuum L. leaf tissue and cell compartments and subsequently to explain the mechanism of uptake, translocation, and cellular interaction. C. annuum L was cultivated and foliarly exposed to MnNPs (100 mg/L, 50 mL/per leaf) before analysis by using scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDS) as well as dark-field hyperspectral and two-photon microscopy. We visualized the internalization of MnNP aggregates from the leaf surface and observed particle accumulation in the leaf cuticle and epidermis as well as spongy mesophyll and guard cells. These techniques enabled a description of how MnNPs cross different plant tissues as well as selectively accumulate and translocate in specific cells. We also imaged abundant fluorescent vesicles and vacuoles containing MnNPs, indicating likely induction of autophagy processes in C. annuum L., which is the bio-response upon storing or transforming the particles. These findings highlight the importance of utilizing orthogonal techniques to characterize nanoscale material fate and distribution with complex biological matrices and demonstrate that such an approach offers a significant mechanistic understanding that can inform both risk assessment and efforts aimed at applying nanotechnology to agriculture.

Environmental assessment in fine jewelry in the U.S.-Mexico's Paso del Norte region: A qualitative study via X-ray fluorescence spectroscopy

Heavy metal contamination in raw materials has spread widely in the United States. The high increased number of recalls in consumer products and the lack of stricter regulations in the raw materials to be used in the jewelry industry have raised concerns among consumers. Studies in low-cost jewelry have shown the presence and high content of heavy metals; this environmental problem led to a child's death after swallowing a charm containing elevated levels of lead (Pb). Exposure to heavy metals, through inhalation, mouth, and skin contact, causes adverse health effects in children and adults. Exposure to lead affects mainly the nervous system and brain development; exposure to cadmium (Cd) causes damage to liver, kidneys, and lungs, and potentially leads to cancer; exposure to nickel (Ni) causes severe dermatitis. Thus, the importance and impact of studies of this nature cannot be overstated. As heavy metal contamination has increased in the United States, this research fills an important knowledge gap between previous studies conducted on low-cost jewelry and fine jewelry. In this study, conducted in the Paso del Norte region, one hundred and forty-three pieces of fine jewelry were evaluated for the presence of heavy metals using X-ray fluorescence (XRF) spectroscopy. Our study showed that 61 samples (42.7 %) exhibited the presence of Ni in the metal alloy, prevailing in jewelry pieces with lower percentage of gold. Eighteen samples showed the presence of Pb in gemstones, 11 pieces of these samples (7.7 % total) had <33.3 % gold (≤10 K); however, none of the samples showed the presence of Pb in the metal alloy. Further research is needed to evaluate the bioaccessibility of Pb in these gemstones, which may pose a potential health hazard to children and adults in the US Paso del Norte region and throughout the world.

Transcriptome reveals the exposure effects of CeO2 nanoparticles on pakchoi (Brassica chinensis L.) photosynthesis

In this study, soil-grown pakchoi after 2 weeks seedling cultivation were exposed to CeO₂ nanoparticles (CeO₂ NPs) at 0.7, 7, 70, and 350 mg kg^-1 for 30 days. Results showed that chlorophyll content and photosynthetic assimilation rate were decreased significantly under all treatments with the largest decrease of 34.16% (0.7 mg kg^-1 CeO₂ NPs), however, sub-stomatal CO₂ was increased dramatically under low dose of CeO₂ NPs (0.7 mg kg^-1). There were 4576, 3548, 2787, and 2514 genes up/down regulated significantly by 0.7, 7, 70, and 350 mg kg^-1 CeO₂ NPs, respectively, and 767 genes affected under all treatments. In addition, 0.7 mg kg^-1 CeO₂ NPs up-regulated 10 chlorophyll synthesis genes, 20 photosynthesis genes, and 10 carbon fixation enzyme genes; while 350 mg kg^-1 CeO₂ NPs down-regulated 5 photosynthesis genes and 28 auxin-activated genes. Among the key genes of photosynthesis, Ferredoxin-NADP reductase (PetH) was upregulated in 0.7, 7 and 70 mg kg^-1 treatments, while Photosystem II lipoprotein (Psb27) was downregulated under 7, 70 and 350 mg kg^-1 treatments. Top 20 metabolic pathways affected by CeO₂ NPs including plant hormone, amino acids, and glutathione, and carbon metabolism These results provide information about utilizing CeO₂ NPs more safely and effectively in the future.

A double-edged effect of manganese-doped graphene quantum dots on salt-stressed Capsicum annuum L

The objective of the current study is to evaluate both the positive and negative effects of manganese-doped graphene quantum dots (GQD-Mn) on Capsicum annuum L. grown under salt stress. GQD-Mn was synthesized, characterized, and foliar-applied (250 mg/L, 120 mg/L, 60 mg/L) to C. annuum L. before and after the flowering stage, during which 100 mM of NaCl solution was introduced into the soil as salt stress. Controls were designed as absolute control (no nanomaterials or salt) and negative control (no nanomaterials only salt). Herein, we report that GQD-Mn offset the reduction of fruit production in salt-stressed C. annuum L. by around 40 %. However, based on a comprehensive analysis of normal alkanes (n-alkane) using gas chromatography-mass spectrometry (GC-MS), we also observed that the leaf epicuticular wax profile was disturbed by GQD-Mn, as the concentration of long-chain n-alkanes was increased. Meanwhile, the content of magnesium (Mg) and zinc (Zn) indicated a potential promoted photosynthesis activity in C. annuum L leaves. We hypothesize that the optical properties of GQD-Mn allow leaves to utilize light more efficiently, thus improving photosynthetic activities in plants to acclimate salt stress. But the increased light usage also induced heat stress on the leaf surfaces, which caused n-alkanes changes. Our results provided a unique perspective on nano-plant interaction that value both beneficial and toxic effects of nanomaterials, especially when evaluating the safety of nano-enabled agriculture in areas facing harsh environmental conditions such as salinity.

Targeting Metal Impurities for the Detection and Quantification of Carbon Black Particles in Water via spICP-MS

Carbon black (CB) is a nanomaterial with numerous industrial applications and high potential for integration into nano-enabled water treatment devices. However, few analytical techniques are capable of measuring CB in water at environmentally relevant concentrations. Therefore, we intended to establish a quantification method for CB with lower detection limits through utilization of trace metal impurities as analytical tracers. Various metal impurities were investigated in six commercial CB materials, and the Monarch 1000 CB was chosen as a model for further testing. The La impurity was chosen as a tracer for spICP-MS analysis based on measured concentration, low detection limits, and lack of polyatomic interferences. CB stability in water and adhesion to the spICP-MS introduction system presented a challenge that was mitigated by the addition of a nonionic surfactant to the matrix. Following optimization, the limit of detection (64 μg/L) and quantification (122 μg/L) for Monarch 1000 CB demonstrated the applicability of this approach to samples expected to contain trace amounts of CB. When compared against gravimetric analysis and UV-visible absorption spectroscopy, spICP-MS quantification exhibited similar sensitivity but with the ability to detect concentrations an order of magnitude lower. Method detection and sensitivity was unaffected when dissolved La was spiked into CB samples at environmentally relevant concentrations. Additionally, a more complex synthetic matrix representative of drinking water caused no appreciable impact to CB quantification. In comparison to existing quantification techniques, this method has achieved competitive sensitivity, a wide working range for quantification, and high selectivity for tracing possible release of CB materials with known metal contents.

Nanobiotechnology-based strategies for enhanced crop stress resilience

Nanobiotechnology approaches to engineering crops with enhanced stress tolerance may be a safe and sustainable strategy to increase crop yield. Under stress conditions, cellular redox homeostasis is disturbed, resulting in the over-accumulation of reactive oxygen species (ROS) that damage biomolecules (lipids, proteins and DNA) and inhibit crop growth and yield. Delivering ROS-scavenging nanomaterials to plants has been shown to alleviate abiotic stress. Here we review the current state of knowledge of using ROS-scavenging nanomaterials to enhance plant stress tolerance. When present below a threshold level, ROS can mediate redox signalling and defence pathways that foster plant acclimatization against stress. We find that ROS-triggering nanomaterials, such as nanoparticulate silver and copper oxide, have the potential to be judiciously applied to crop species to stimulate the defence system, prime stress responses and subsequently increase the stress resistance of crops.

Mechanistic insights into phenanthrene acropetal translocation via wheat xylem: Separation and identification of transfer proteins

Polycyclic aromatic hydrocarbons (PAHs) have the potential to cause cancer, teratogenicity, and mutagenesis in humans. Long-term plant safe production relies on how PAHs are transported and coordinated across organs. However, the acropetal transfer mechanism of PAHs in staple crop stems, particularly in xylem, a critical path, is unknown. Herein, we first confirmed the presence of specific interaction between the proteins and phenanthrene by employing the magnetic phenanthrene-bound bead immunoassay and label free liquid chromatograph mass spectrometer (LC-MS/MS), suggesting that peroxidase (uniprot accession: A0A3B5XXD0) and unidentified proteins (uniprot accession: A0A3B6LUC6) may function as the carriers to load and acropetally translocate phenanthrene (a model PAH) in wheat xylem. This specified binding of protein-phenanthrene may form through hydrophobic interactions in the conservative binding region, as revealed by protein structural investigations and molecular docking. To further investigate the role of these proteins in phenanthrene solubilization, phenanthrene exposure was conducted: a substantial quantity of peroxidase was produced; an unusually high expression of uncharacterized proteins was observed, indicating their positive effects in the acropetal transfer of phenanthrene in wheat xylem. These data confirmed that the two proteins are crucial in the solubilization of phenanthrene in wheat xylem sap. Our findings provide fresh light on the molecular mechanism of PAH loading in plant xylem and techniques for ensuring the security of staple crops and improving the efficacy of phytoremediation in a PAH-contaminated environment.

Therapeutic Delivery of Nanoscale Sulfur to Suppress Disease in Tomatoes: In Vitro Imaging and Orthogonal Mechanistic Investigation

Nanoscale sulfur can be a multifunctional agricultural amendment to enhance crop nutrition and suppress disease. Pristine (nS) and stearic acid coated (cS) sulfur nanoparticles were added to soil planted with tomatoes (Solanum lycopersicum) at 200 mg/L soil and infested with Fusarium oxysporum. Bulk sulfur, ionic sulfate, and healthy controls were included. Orthogonal end points were measured in two greenhouse experiments, including agronomic and photosynthetic parameters, disease severity/suppression, mechanistic biochemical and molecular end points including the time-dependent expression of 13 genes related to two S bioassimilation and pathogenesis-response, and metabolomic profiles. Disease reduced the plant biomass by up to 87%, but nS and cS amendment significantly reduced disease as determined by area-under-the-disease-progress curve by 54 and 56%, respectively. An increase in planta S accumulation was evident, with size-specific translocation ratios suggesting different uptake mechanisms. In vivo two-photon microscopy and time-dependent gene expression revealed a nanoscale-specific elemental S bioassimilation pathway within the plant that is separate from traditional sulfate accumulation. These findings correlate well with time-dependent metabolomic profiling, which exhibited increased disease resistance and plant immunity related metabolites only with nanoscale treatment. The linked gene expression and metabolomics data demonstrate a time-sensitive physiological window where nanoscale stimulation of plant immunity will be effective. These findings provide mechanistic understandings of nonmetal nanomaterial-based suppression of plant disease and significantly advance sustainable nanoenabled agricultural strategies to increase food production.

Tomato Fruit Nutritional Quality Is Altered by the Foliar Application of Various Metal Oxide Nanomaterials

Carbohydrates and phytonutrients play important roles in tomato fruit’s nutritional quality. In the current study, Fe₃O₄, MnFe₂O₄, ZnFe₂O₄, Zn_0.5Mn_0.5Fe₂O₄, Mn₃O₄, and ZnO nanomaterials (NMs) were synthesized, characterized, and applied at 250 mg/L to tomato plants via foliar application to investigate their effects on the nutritional quality of tomato fruits. The plant growth cycle was conducted for a total of 135 days in a greenhouse and the tomato fruits were harvested as they ripened. The lycopene content was initially reduced at 0 stored days by MnFe₂O₄, ZnFe₂O₄, and Zn_0.5Mn_0.5Fe₂O₄; however, after a 15-day storage, there was no statistical difference between the treatments and the control. Moreover, the β-carotene content was also reduced by Zn_0.5Mn_0.5Fe₂O₄, Mn₃O₄, and ZnO. The effects of the Mn₃O₄ and ZnO carried over and inhibited the β-carotene after the fruit was stored. However, the total phenolic compounds were increased by ZnFe₂O₄, Zn_0.5Mn_0.5Fe₂O₄, and ZnO after 15 days of storage. Additionally, the sugar content in the fruit was enhanced by 118% and 111% when plants were exposed to Mn₃O₄ and ZnO, respectively. This study demonstrates both beneficial and detrimental effects of various NMs on tomato fruit quality and highlights the need for caution in such nanoscale applications during crop growth.

Soil and foliar exposure of soybean (Glycine max) to Cu: Nanoparticle coating-dependent plant responses

In this study, we investigated the effects of citric acid (CA) coated copper oxide nanoparticles (CuO NPs) and their application method (foliar or soil exposure) on the growth and physiology of soybean (Glycine max). After nanomaterials exposure via foliar or soil application, Cu concentration was elevated in the roots, leaves, stem, pod, and seeds; distribution varied by plant organ and surface coating. Foliar application of CuO NPs at 300 mg/L and CuO-CA NPs at 75 mg/L increased soybean yield by 169.5% and 170.1%, respectively. In contrast, foliar and soil exposure to ionic Cu with all treatments (75 and 300 mg/L) had no impact on yield. Additionally, CuO-CA NPs at 300 mg/L significantly decreased Cu concentration in seeds by 46.7%, compared to control, and by 44.7%, compared to equivalent concentration of CuO NPs. Based on the total Cu concentration, CuO NPs appeared to be more accessible for plant uptake, compared to CuO-CA NPs, inducing a decrease in protein content by 56.3% and inhibiting plant height by 27.9% at 300 mg/kg under soil exposure. The translocation of Cu from leaf to root and from the root to leaf through the xylem was imaged by two-photon microscopy. The findings indicate that citric acid coating reduced CuO NPs toxicity in soybean, demonstrating that surface modification may change the toxic properties of NPs. This research provides direct evidence for the positive effects of CuO-CA NPs on soybean, including accumulation and in planta transfer of the particles, and provides important information when assessing the risk and the benefits of NP use in food safety and security.

MoS2 Nanosheets-Cyanobacteria Interaction: Reprogrammed Carbon and Nitrogen Metabolism

Fully understanding the environmental implications of engineered nanomaterials is crucial for their safe and sustainable use. Cyanobacteria, as the pioneers of the planet earth, play important roles in global carbon and nitrogen cycling. Here, we evaluated the biological effects of molybdenum disulfide (MoS₂) nanosheets on a N₂-fixation cyanobacteria (Nostoc sphaeroides) by monitoring growth and metabolome changes. MoS₂ nanosheets did not exert overt toxicity to Nostoc at the tested doses (0.1 and 1 mg/L). On the contrary, the intrinsic enzyme-like activities and semiconducting properties of MoS₂ nanosheets promoted the metabolic processes of Nostoc, including enhancing CO₂-fixation-related Calvin cycle metabolic pathway. Meanwhile, MoS₂ boosted the production of a range of biochemicals, including sugars, fatty acids, amino acids, and other valuable end products. The altered carbon metabolism subsequently drove proportional changes in nitrogen metabolism in Nostoc. These intracellular metabolic changes could potentially alter global C and N cycles. The findings of this study shed light on the nature and underlying mechanisms of bio-nanoparticle interactions, and offer the prospect of utilization bio-nanomaterials for efficient CO₂ sequestration and sustainable biochemical production.

Soil-Weathered CuO Nanoparticles Compromise Foliar Health and Pigment Production in Spinach (Spinacia oleracea)

In this study, spinach plants exposed to fresh/unweathered (UW) or weathered (W) copper compounds in soil were analyzed for growth and nutritional composition. Plants were exposed for 45 days to freshly prepared or soil-aged (35 days) nanoparticulate CuO (nCuO), bulk-scale CuO (bCuO), or CuSO₄ at 0 (control), 400, 400, and 40 mg/kg of soil, respectively. Foliar health, gas exchange, pigment content (chlorophyll and carotenoid), catalase and ascorbate peroxidase enzymes, gene expression, and Cu bioaccumulation were evaluated along with SEM imagery for select samples. Foliar biomass was higher in UW control (84%) and in UW ionic treatment (87%), compared to the corresponding W treatments (p ≤ 0.1). Root catalase activity was increased by 110% in UW bCuO treatment as compared to the W counterpart; the value for the W ionic treatment was increased by 2167% compared to the UW counterpart (p ≤ 0.05). At 20 days post-transplantation, W nCuO-exposed plants had ∼56% lower carotenoid content compared to both W control and the UW counterpart (p ≤ 0.05). The findings indicate that over the full life cycle of spinach plant the weathering process significantly deteriorates leaf pigment production under CuO exposure in particular and foliar health in general.

Metabolomic analysis reveals dose-dependent alteration of maize (Zea mays L.) metabolites and mineral nutrient profiles upon exposure to zerovalent iron nanoparticles

Nanoscale zero-valent iron (nZVI) has been widely applied in the environmental field to degrade organic pollutants. The potential risk posed from nZVI on crop species is not well understood and is critical for sustainable application in the future. In this study, maize (Zea mays L.) plants were cultivated in field soils mixed with nZVI at 0, 50, and 500 mg/kg soil for four weeks. Upon exposure to 500 mg/kg nZVI, ICP-MS results showed that Fe accumulated by roots and translocated to leaves was increased by 36% relative to untreated controls. At 50 mg/kg, root elongation was enhanced by 150-200%; at 500 mg/kg, pigments, lipid peroxidation, and polyphenolic levels in leaves were increased by 12, 87 and 23%, respectively, whereas the accumulation of Al, Ca, and P were decreased by 62.2%, 19.7%, and 13.3%, respectively. A gas chromatography-mass spectrometry (GC-MS) based metabolomics analysis of maize roots revealed that antioxidants and stress signaling-associated metabolites were downregulated at 50 mg/kg, but were upregulated at 500 mg/kg. At 50 mg/kg, the content of glutamate was increased by 11-fold, whereas glutamine was decreased by 99% with respect to controls. Interestingly, eight metabolic pathways were disturbed at 50 mg/kg, but none at 500 mg/kg. This metabolic reprogramming at the lower dose represented potential risks to the health of exposed plants, which could be particularly important although no phenotypic impacts were noted. Overall, metabolites analysis provides a deeper understanding at the molecular level of plant response to nZVI and is a powerful tool for full characterization of risk posed to crop species as part of food safety assessment.

Soil-aged nano titanium dioxide effects on full-grown carrot: Dose and surface-coating dependent improvements on growth and nutrient quality

Rutile titanium dioxide nanoparticles (nTiO₂) were weathered in field soil at 0, 100, 200, and 400 mg Ti/kg soil for four months. Two types of nTiO₂ with different surface coatings (hydrophilic and hydrophobic), uncoated nTiO₂ (pristine), and the untreated control were included. Thereafter, carrot seeds (Daucus carota L.) were sown in those soils and grown in a growth chamber for 115 days until full maturity. A comparison was made between this and our previous unaged study, where carrots were treated in the same way in soil with freshly amended nTiO₂. The responses of plants depended on the nTiO₂ surface coating and concentration. The aged hydrophobic and hydrophilic-coated nTiO₂ induced more positive effects on plant development at 400 and 100 mg Ti/kg soil, respectively, compared with control and pristine treatments. Taproot and leaf fresh biomass and plant height were improved by up to 64%, 40%, and 40% compared with control, respectively. Meanwhile, nutrient elements such as Fe in leaves, Mg in taproots, and Ca, Zn, and K in roots were enhanced by up to 66%, 64%, 41, 143% and 46%, respectively. However, the contents of sugar, starch, and some other metal elements in taproots were negatively affected, which may compromise their nutritional quality. Taken together, the overall growth of carrots was benefited by the aged nTiO₂ depending on coating and concentration. The aging process served as a potential sustainable strategy to alleviate the phytotoxicity of unweathered nanoparticles.

COVID-19 and Nanoscience in the Developing World: Rapid Detection and Remediation in Wastewater

Given the known presence of SARS-Cov-2 in wastewater, stemming disease spread in global regions where untreated effluent in the environment is common will experience additional pressure. Though development and preliminary trials of a vaccine against SARS-CoV-2 have been launched in several countries, rapid and effective alternative tools for the timely detection and remediation of SARS-CoV-2 in wastewater, especially in the developing countries, is of paramount importance. Here, we propose a promising, non-invasive technique for early prediction and targeted detection of SARS-CoV-2 to prevent current and future outbreaks. Thus, a combination of nanotechnology with wastewater-based epidemiology and artificial intelligence could be deployed for community-level wastewater virus detection and remediation.

Effects of different surface-coated nTiO2 on full-grown carrot plants: Impacts on root splitting, essential elements, and Ti uptake

The production and environmental release of surface-modified titanium dioxide nanoparticles (nTiO₂) have increased. Hence, crops may be directly exposed to the nTiO₂ in soil. In this study, we grew carrots in soils amended with pristine, hydrophilic and hydrophobic surface-coated nTiO₂ at 100, 200, and 400 mg kg^-1 until full-plant maturity. The content of Ti in plant secondary roots treated with different nTiO₂ at 400 mg kg^-1 was in the order of hydrophobic > hydrophilic > pristine treatments, with values of 140.1, 100.5, and 64.3 mg kg^-1, respectively. The fresh biomass of the taproot was significantly decreased by all nTiO₂ forms at 400 mg kg^-1 by up to 56 %, compared to control. Pristine nTiO₂ at 100 mg kg^-1 enhanced the fresh weight of leaves by 51 % with respect to control. Remarkably, an abnormal increase of taproot splitting was found in plants treated with all nTiO₂ forms. In carrots treated with the surface-coated nTiO₂, the accumulation of Ca, Mg, Fe, and Zn increased in leaves; but Mg, Mn, and Zn decreased in taproots. These results suggest that future regulation of nTiO₂ release into soils should consider its surface coating properties since the phytotoxicity effects depend on nTiO₂ outer structure.

Antioxidant and defense genetic expressions in corn at early-developmental stage are differentially modulated by copper form exposure (nano, bulk, ionic): Nutrient and physiological effects

In the present study, Zea mays seedlings grown under nano Cu(OH)₂ (nCu), bulk Cu(OH)₂ (bCu), and ionic CuSO₄ (iCu) compound exposure were harvested after six days. The nutritional profile was determined to be significantly disrupted in the roots by 1000 ppm bCu treatment, resulting in a 58.7% reduction in potassium compared to the control. In the shoots, a significant decrease of manganese was observed for 10 and 1000 ppm iCu treatments with 55.7% and 64.2% reductions, respectively. The overall protein content and catalase (CAT) enzymatic activity, however, remained unaffected in either roots or shoots, while an absence of polyphenol oxidase (PPO) activity was observed for all samples. The genetic expression of defense-related genes, metallothionein (MT), CAT, ascorbate peroxidase (APX), and PPO was assessed. The genetic expression of MT was upregulated 50-fold in roots treated with 1000 ppm bCu. There were no significant differences in CAT transcripts among the various treatments, while APX was upregulated 28 and 19-fold in shoots treated with 10 ppm bCu and 10 ppm nCu, respectively. Meanwhile, APX mRNA levels were downregulated five-fold in shoots treated with 1000 ppm iCu. Thus, indicating that the role of APX in plant defense was reinforced in seedlings exposed to low concentration of particulate Cu compounds. Remarkably, no PPO expression was found in any of the treatments and controls, which suggests this enzyme is expressed only under specific external factors or seedlings have an "immature" cascade signaling activation of the PPO system. Taken together, these results show that bCu and nCu treatments at a low concentration do not compromise vital cell machinery but rather elicit the enhancement of defense responses as observed through the increase in APX expression. Furthermore, under optimal concentrations, these Cu treatments show promise in enhancing corn defense responses, which can ultimately lead to increases in future global crop yields.

Copper nanowires as nanofertilizers for alfalfa plants: Understanding nano-bio systems interactions from microbial genomics, plant molecular responses and spectroscopic studies

The recent application of nano copper (Cu) compounds in the agrosystem has shown potential to improve the physiological performance and agronomical parameters of crops. We grew alfalfa (Medicago sativa) in potting mix amended with bulk, nano, and ionic Cu compounds at 80 and 280 mg Cu/kg; then, we evaluated plant performance at physiological and molecular levels. Plants treated with bulk/nano Cu presented better agronomical responses. The P and S content was reduced in bulk and ionic Cu-exposed plants, compared to controls (p ≤ .05). All Cu forms increased the content of Fe and Zn in roots and Fe in leaves, compared to controls (p ≤ .05). Leaf-superoxide dismutase expression was augmented ~27-fold and rubisco mRNA was unaffected in bulk/nano Cu-treated plants, compared to controls (p ≤ .05). Bulk/nano Cu incremented the relative abundance of microorganisms involved in the elemental uptake. These results indicate that nano Cu improved the physiology of alfalfa and can be considered as potential nanofertilizers.

Effect of copper oxide nanoparticles on two varieties of sweetpotato plants

Little information is available on the interaction of CuO nanoparticles (nCuO) with tuberous roots. In this study, Beauregard-14 (B-14, low lignin) and Covington (COV, high lignin) sweetpotato varieties were cultivated until maturity in soil amended with nCuO, bulk copper oxide (bCuO) and CuCl2 at 25-125 mg/kg. The Cu treatments had no significant influence on chlorophyll content. Gas exchange parameters were not affected in B-14. In COV, however, at 125 mg/kg treatments, bCuO reduced the intercellular CO2 (11%), while CuCl2 increased it by 7%, compared with control (p ≤ 0.035). At 25 mg/kg nCuO increased the length of COV roots (20.7 ± 2.0 cm vs. 14.6 ± 0.8 cm, p ≤ 0.05). In periderm of B-14, nCuO, at 125 mg/kg, increased Mg by 232%, while the equivalent concentration of CuCl2 reduced P by 410%, compared with control (p ≤ 0.05). The data suggest the potential application of nCuO as nanofertilizer for sweetpotato storage root production.

Improvement of nutrient elements and allicin content in green onion (Allium fistulosum) plants exposed to CuO nanoparticles

With the exponential growth of nanomaterial production in the last years, nano copper (Cu)-based compounds are gaining more consideration in agriculture since they can work as pesticides or fertilizers. Chinese scallions (Allium fistulosum), which are characterized by their high content of the antioxidant allicin, were the chosen plants for this study. Spectroscopic and microscopic techniques were used to evaluate the nutrient element, allicin content, and enzyme antioxidant properties of scallion plants. Plants were harvested after growing for 80 days at greenhouse conditions in soil amended with CuO particles [nano (nCuO) and bulk (bCuO)] and CuSO₄ at 75-600 mg/kg]. Two-photon microscopy images demonstrated the particulate Cu uptake in nCuO and bCuO treated roots. In plants exposed to 150 mg/kg of the Cu-based compounds, root Cu content was higher in plants treated with nCuO compared with bCuO, CuSO₄, and control (p ≤ 0.05). At 150 mg/kg, nCuO increased root Ca (86%), root Fe (71%), bulb Ca (74%), and bulb Mg (108%) content, compared with control (p ≤ 0.05). At the same concentration, bCuO reduced root Ca (67%) and root Mg (33%), compared with control (p ≤ 0.05). At all concentrations, nCuO and CuSO₄ increased leaf allicin (56-187% and 42-90%, respectively), compared with control (p ≤ 0.05). The antioxidant enzymes were differentially affected by the Cu-based treatments. Overall, the data showed that nCuO enhances nutrient and allicin contents in scallion, which suggests they might be used as a nanofertilizer for onion production.

Interactive effects of drought, organic fertilizer, and zinc oxide nanoscale and bulk particles on wheat performance and grain nutrient accumulation

Drought (40% field moisture capacity), organic fertilizer (O-F; 10%), and nano vs. bulk-ZnO particles (1.7 vs. 3.5 mg Zn/kg) were assessed in soil to determine their interactive effects on wheat performance and nutrient acquisition. Drought significantly reduced (6%) chlorophyll levels, whereas nano and bulk-ZnO alleviated some stress, thereby increasing (14-16%) chlorophyll levels, compared to the control. O-F increased (29%) chlorophyll levels and counteracted Zn's effect. Drought delayed (3-days) panicle emergence; O-F, nano and bulk-ZnO each accelerated (5-days) panicle emergence under drought, relative to the control and absence of O-F. Drought reduced (51%) grain yield, while O-F increased (130%) yield under drought. Grain yield was unaffected by Zn treatment under drought but increased (88%) under non-drought condition with bulk-ZnO, relative to the control. Drought lowered (43%) shoot Zn uptake. Compared to the control, nano and bulk-ZnO increased (39 and 23%, respectively) shoot Zn in the absence of O-F, whereas O-F amendment enhanced (94%) shoot Zn. Drought increased (48%) grain Zn concentration; nano and bulk-ZnO increased (29 and 18%, respectively) grain Zn, relative to the control, and O-F increased (85%) grain Zn. Zn recovery efficiency was in the order O-F > nano-ZnO > bulk-ZnO, regardless of the water status. Grain Fe concentration was unaffected by drought, under which O-F significantly reduced grain Fe, and nano-ZnO significantly reduced grain Fe, in the absence of O-F. Nano and bulk-ZnO also significantly reduced grain Fe, with O-F amendment under drought. Drought can have dire consequences for food and nutrition security, with implications for human health. This study demonstrated that drought-induced effects in food crops can be partially or wholly alleviated by ZnO particles and Zn-rich O-F. Understanding the interactions of drought and potential mitigation strategies such as fertilization with Zn-rich organic manure and ZnO can increase options for sustaining food production and quality under adverse conditions.

Insights into the Biogeochemical Cycling of Cobalt: Precipitation and Transformation of Cobalt Sulfide Nanoparticles under Low-Temperature Aqueous Conditions

Cobalt sulfide precipitates, key phases in the natural biogeochemistry of cobalt and in relevant remediation and resource recovery processes, are poorly defined under low-temperature aqueous conditions. Here, we systematically studied Co (Fe) sulfides precipitated and aged in environmentally relevant solutions, defined by different combinations of pH, initial cobalt to iron ratios ([Co]_aq/[Fe]_aq), with/without S⁰, and the presence/absence of sulfate-reducing bacteria. The initial abiogenic precipitates were composed exclusively of amorphous Co sulfide nanoparticles (CoS·xH₂O) that were stable in anoxic solution for 2 months, with estimated log K* values 1-5 orders of magnitude higher than that previously reported for Co sulfides. The addition of S⁰, in combination with acidic pH and elevated temperature (60 °C), resulted in recrystallization of the amorphous precipitates into nanocrystalline jaipurite (hexagonal CoS) within 1 month. In the presence of Fe(II)_aq, the abiogenic precipitates were composed of more crystalline Co sulfides and/or Co-rich mackinawite, the exact phase being dependent on the [Co]_aq/[Fe]_aq value. The biogenic precipitates displayed higher crystallinity for Co sulfides (up to the formation of nanocrystalline cobalt pentlandite, Co₉S₈) and lower crystallinity for Co-rich mackinawite, suggestive of mineral-specific bacterial interaction. The revealed precipitation and transformation pathways of Co (Fe) sulfides in this study allows for a better constraint of Co biogeochemistry in various natural and engineered environments.

High-Throughput Screening for Engineered Nanoparticles That Enhance Photosynthesis Using Mesophyll Protoplasts

Certain engineered nanoparticles (NPs) have unique properties that have exhibited significant potential for promoting photosynthesis and enhancing crop productivity. Understanding the fundamental interactions between NPs and plants is crucial for the sustainable development of nanoenabled agriculture. Leaf mesophyll protoplasts, which maintain similar physiological response and cellular activity as intact plants, were selected as a model system to study the impact of NPs on photosynthesis. The mesophyll protoplasts isolated from spinach were cultivated with different NMs (Fe, Mn₃O₄, SiO₂, Ag, and MoS₂) dosing at 50 mg/L for 2 h under illumination. The potential maximum quantum yield and adenosine triphosphate (ATP) production of mesophyll protoplasts were significantly increased by Mn₃O₄ and Fe NPs (23% and 43%, respectively), and were decreased by Ag and MoS₂ NPs. The mechanism for the photosynthetic enhancement by Mn₃O₄ and Fe is to increase the photocurrent and electron transfer rate, as revealed by photoelectrochemical measurement. GC-MS based single cell type metabolomics reveal that NPs (Fe and MoS₂) altered the metabolic profiles of mesophyll cells during 2 h of illumination period. Separately, the effect of NPs exposure on photosynthesis and biomass were also conducted at the whole plant level. A strong correlation was observed with protoplast data; plant biomass was significantly increased by Mn₃O₄ exposure (57%) but was decreased (24%) by treatment of Ag NPs. The use of mesophyll protoplasts can be a fast and reliable tool for screening NPs to enhance photosynthesis for potential nanofertilizer use. Importantly, inclusion of a metabolic analysis can provide mechanistic toxicity data to ensure the development "safer-by-design" nanoenabled platforms.

Silver Nanoparticles Alter Soil Microbial Community Compositions and Metabolite Profiles in Unplanted and Cucumber-Planted Soils

The rapid development of nanotechnology makes the environmental impact assessment a necessity to ensure the sustainable use of engineered nanomaterials. Here, silver nanoparticles (AgNPs) at 100 mg/kg were added to soils in the absence or presence of cucumber (Cucumis sativa) plants for 60 days. The response of the soil microbial community and associated soil metabolites was investigated by 16S rRNA gene sequencing and gas chromatography-mass spectrometry (GC-MS)-based metabolomics, respectively. The results show that AgNP exposure significantly increased the soil pH in both unplanted and cucumber-planted soils. The soil bacterial community structure was altered upon Ag exposure in both soils. Several functionally significant bacterial groups, which are associated with carbon, nitrogen, and phosphorus cycling, were compromised by AgNPs in both unplanted and cucumber-planted soils. Generally, plants played a limited role in mediating the impact of AgNPs on the bacterial community. Soil metabolomic analysis showed that AgNPs altered the metabolite profile in both unplanted and cucumber-planted soils. The significantly changed metabolites are involved in sugar and amino acid-related metabolic pathways, indicating the perturbation of C and N metabolism, which is consistent with the bacterial community structure results. In addition, several fatty acids were significantly decreased upon exposure to AgNPs in both unplanted and cucumber-planted soils, suggesting the possible oxidative stress imposed on microbial cell membranes. These results provide valuable information for understanding the biological and biochemical impact of AgNP exposure on both plant species and on soil microbial communities; such understanding is needed to understand the risk posed by these materials in the environment.

Nutritional Status of Tomato (Solanum lycopersicum) Fruit Grown in Fusarium-Infested Soil: Impact of Cerium Oxide Nanoparticles

In this study, the impact of cerium oxide nanoparticles on the nutritional value of tomato (Solanum lycopersicum) fruit grown in soil infested with Fusarium oxysporum f. sp. lycopersici was investigated in a greenhouse pot study. Three-week old seedlings of Bonny Best tomato plants were exposed by foliar and soil routes to nanoparticle CeO₂ (NP CeO₂) and cerium acetate (CeAc) at 0, 50, and 250 mg/L and transplanted into pots containing a soil mixture infested with the Fusarium wilt pathogen. Fruit biomass, water content, diameter, and nutritional content (lycopene, reducing and total sugar) along with elemental composition, including Ce, were evaluated. Fruit Ce concentration was below the detection limit in all treatments. Foliar exposure to NP CeO₂ at 250 increased the fruit dry weight (67%) and lycopene content (9%) in infested plants, compared with the infested untreated control. Foliar exposure to CeAc at 50 mg/L reduced fruit fresh weight (46%) and water content (46%) and increased the fruit lycopene content by 11% via root exposure as compared with the untreated infested control. At 250 mg/L, CeAc increased fruit dry weight (94%), compared with the infested untreated control. Total sugar content decreased in fruits of infested plants exposed via roots to NP CeO₂ at 50 mg/kg (63%) and 250 mg/kg (54%), CeAc at 50 mg/kg (46%), and foliarly at 50 mg/L (50%) and 250 mg/L (50%), all compared with the infested untreated control. Plants grown in Fusarium-infested soil had decreased fruit dry weight (42%) and lycopene content (17%) and increased total sugar (60%) and Ca content (140%), when compared with the noninfested untreated control (p ≤ 0.05). Overall, the data suggested minimal negative effects of NP CeO₂ on the nutritional value of tomato fruit while simultaneously suppressing Fusarium wilt disease.

Soybeans Grown with Carbonaceous Nanomaterials Maintain Nitrogen Stoichiometry by Assimilating Soil Nitrogen to Offset Impaired Dinitrogen Fixation

Engineered nanomaterials (ENMs) can enter agroecosystems because of their widespread use and disposal. Within soil, ENMs may affect legumes and their dinitrogen (N2) fixation, which are critical for food supply and N-cycling. Prior research focusing on end point treatment effects has reported that N2-fixing symbioses in an important food legume, soybean, can be impaired by ENMs. Yet, it remains unknown how ENMs can influence the actual amounts of N2 fixed and what plant total N contents are since plants can also acquire N from the soil. We determined the effects of one already widespread and two rapidly expanding carbonaceous nanomaterials (CNMs: carbon black, multiwalled carbon nanotubes, and graphene; each at three concentrations) on the N economy of soil-grown soybeans. Unlike previous studies, this research focused on processes and interactions within a plant-soil-microbial system. We found that total plant N accumulation was unaffected by CNMs. However, as shown by 15N isotope analyses, CNMs significantly diminished soybean N2 fixation (by 31-78%). Plants maintained N stoichiometry by assimilating compensatory N from the soil, accompanied by increased net soil N mineralization. Our findings suggest that CNMs could undermine the role of legume N2 fixation in supplying N to agroecosystems. Maintaining productivity in leguminous agriculture experiencing such effects would require more fossil-fuel-intensive N fertilizer and increase associated economic and environmental costs. This work highlights the value of a process-based analysis of a plant-soil-microbial system for assessing how ENMs in soil can affect legume N2 fixation and N-cycling.

Facile Coating of Urea With Low-Dose ZnO Nanoparticles Promotes Wheat Performance and Enhances Zn Uptake Under Drought Stress

Zinc oxide nanoparticles (ZnO-NPs) hold promise as novel fertilizer nutrients for crops. However, their ultra-small size could hinder large-scale field application due to potential for drift, untimely dissolution or aggregation. In this study, urea was coated with ZnO-NPs (1%) or bulk ZnO (2%) and evaluated in wheat (Triticum aestivum L.) in a greenhouse, under drought (40% field moisture capacity; FMC) and non-drought (80% FMC) conditions, in comparison with urea not coated with ZnO (control), and urea with separate ZnO-NP (1%) or bulk ZnO (2%) amendment. Plants were exposed to ≤ 2.17 mg/kg ZnO-NPs and ≤ 4.34 mg/kg bulk-ZnO, indicating exposure to a higher rate of Zn from the bulk ZnO. ZnO-NPs and bulk-ZnO showed similar urea coating efficiencies of 74-75%. Drought significantly (p ≤ 0.05) increased time to panicle initiation, reduced grain yield, and inhibited uptake of Zn, nitrogen (N), and phosphorus (P). Under drought, ZnO-NPs significantly reduced average time to panicle initiation by 5 days, irrespective of coating, and relative to the control. In contrast, bulk ZnO did not affect time to panicle initiation. Compared to the control, grain yield increased significantly, 51 or 39%, with ZnO-NP-coated or uncoated urea. Yield increases from bulk-ZnO-coated or uncoated urea were insignificant, compared to both the control and the ZnO-NP treatments. Plant uptake of Zn increased by 24 or 8% with coated or uncoated ZnO-NPs; and by 78 or 10% with coated or uncoated bulk-ZnO. Under non-drought conditions, Zn treatment did not significantly reduce panicle initiation time, except with uncoated bulk-ZnO. Relative to the control, ZnO-NPs (irrespective of coating) significantly increased grain yield; and coated ZnO-NPs enhanced Zn uptake significantly. Zn fertilization did not significantly affect N and P uptake, regardless of particle size or coating. Collectively, these findings demonstrate that coating urea with ZnO-NPs enhances plant performance and Zn accumulation, thus potentiating field-scale deployment of nano-scale micronutrients. Notably, lower Zn inputs from ZnO-NPs enhanced crop productivity, comparable to higher inputs from bulk-ZnO. This highlights a key benefit of nanofertilizers: a reduction of nutrient inputs into agriculture without yield penalities.

Study of organochlorine pesticides and heavy metals in soils of the Juarez valley: an important agricultural region between Mexico and the USA

The Juarez Valley is an important agricultural region in northern Mexico, conveniently organized into three modules (I to III). For decades, their soils have been exposed to organochlorine pesticides (OCPs) and also have been irrigated with wastewaters, which may contain heavy metals. Nowadays, there is very limited information regarding the presence of OCPs and heavy metals in these soils. Thus, the aim of this study was to diagnose these soils for OCPs and heavy metal content by using gas chromatography coupled with electron micro-capture detector and atomic absorption spectrometry, respectively. The results indicated that 4,4'-dichlorodiphenyldichloroethylene and 4,4'-dichlorodiphenyltrichloroethane were primarily disseminated across the three modules since they were found in 100% and 97% of the analyzed soils, respectively. According to international regulations, none of the determined OCP concentrations are out of the limits. Additionally, the Cu, Zn, Fe, Pb, and Mn were found in all sampled soils from the three modules. The highest concentration of Fe was found in module II (1902.7 ± 332.2 mg kg^-1), followed by Mn in module III (392.43 ± 74.43 mg kg^-1), Zn in module I (38.36 ± 26.57 mg kg^-1), Pb in module II (23.48 ± 6.48 mg kg^-1), and Cu in module I (11.04 ± 3.83 mg kg^-1) (p ≤ 0.05). These values did not exceed the limits proposed by international standards. The Cd was detected in most of the analyzed soils and all their values, with an average of 2 mg kg^-1, surpassed the Mexican standards (0.35 mg kg^-1). This study has mapped the main OCPs and heavy metals in the Juarez Valley and can serve as a starting point to further monitor the behave of xenobiotics. Since these recalcitrant compounds might be bio-accumulated in biological systems, further analytical methods, as well as remediation techniques, should be developed.

Can abiotic stresses in plants be alleviated by manganese nanoparticles or compounds?

Abiotic stress has become one of the most challenging problems for agriculture as the world population keeps increasing dramatically. Crop stress management using manganese (Mn) compounds has been recently employed to reduce the negative effects caused by drought, harsh temperature, and salinity. In response to abiotic stress, an adequate supply of Mn has shown to remediate plant manganese deficiency, induce Mn superoxide dismutase at the transcriptional level to face reactive oxygen species production, and stimulate manganese-dependent proteins to maintain cell integrity. Lately, nanoparticles (NPs) have been explored in agriculture applications. Recent studies have implied that Mn NPs may help plants to overcome abiotic stresses at higher efficiency and lower toxicity, compared to their bulk or ionic counterparts. Although studies have shown that Mn compounds promote crop growth and alleviate abiotic stress, many questions related to Mn-plant networking, their mode of signaling, and the Mn-dependent regulation processes need to be answered.

Zinc oxide nanoparticles alleviate drought-induced alterations in sorghum performance, nutrient acquisition, and grain fortification

Drought is a major environmental event affecting crop productivity and nutritional quality, and potentially, human nutrition. This study evaluated drought effects on performance and nutrient acquisition and distribution in sorghum; and whether ZnO nanoparticles (ZnO-NPs) might alleviate such effects. Soil was amended with ZnO-NPs at 1, 3, and 5 mg Zn/kg, and drought was imposed 4 weeks after seed germination by maintaining the soil at 40% of field moisture capacity. Flag leaf and grain head emergence were delayed 6-17 days by drought, but the delays were reduced to 4-5 days by ZnO-NPs. Drought significantly (p < 0.05) reduced (76%) grain yield; however, ZnO-NP amendment under drought improved grain (22-183%) yield. Drought inhibited grain nitrogen (N) translocation (57%) and total (root, shoot and grain) N acquisition (22%). However, ZnO-NPs (5 mg/kg) improved (84%) grain N translocation relative to the drought control and restored total N levels to the non-drought condition. Shoot uptake of phosphorus (P) was promoted (39%) by drought, while grain P translocation was inhibited (63%); however, ZnO-NPs lowered total P acquisition under drought by 11-23%. Drought impeded shoot uptake (45%), grain translocation (71%) and total acquisition (41%) of potassium (K). ZnO-NP amendment (5 mg/kg) to drought-affected plants improved total K acquisition (16-30%) and grain K (123%), relative to the drought control. Drought lowered (32%) average grain Zn concentration; however, ZnO-NP amendments improved (94%) grain Zn under drought. This study represents the first evidence of mitigation of drought stress in full-term plants solely by exposure to ZnO-NPs in soil. The ability of ZnO-NPs to accelerate plant development, promote yield, fortify edible grains with critically essential nutrients such as Zn, and improve N acquisition under drought stress has strong implications for increasing cropping systems resilience, sustaining human/animal food/feed and nutrition security, and reducing nutrient losses and environmental pollution associated with N-fertilizers.

Sustainable synthesis and remarkable adsorption capacity of MOF/graphene oxide and MOF/CNT based hybrid nanocomposites for the removal of Bisphenol A from water

A series of novel absorbents based on Cu-BDC MOFs decorated over graphene oxide (GrO) and carbon nanotubes (CNTs) hybrid nanocomposites, namely Cu-BDC@GrO and Cu-BDC@CNT, are synthesized via a facile and one-pot green solvothermal method for water remediation. The nanocomposites were characterized by XRD, TEM, SEM, EDS, Raman, FTIR, TGA, XPS, Zetasizer and ICP-OES instruments. XRD results confirmed the high crystalline structure of the synthesized hybrid nanocomposites. Morphological analysis by SEM and TEM verified the successful decoration of nano-sized Cu-BDC MOFs over GrO and CNT platforms; whereas, EDS and XPS analysis confirmed the presence of all components in the hybrid nanocomposites. Bisphenol A was used in this study as a model organic pollutant that is sometimes present in the industrial wastewater to test the adsorption capacity of the prepared hybrid nanomaterials toward their removal from water. The hybrid nanomaterials showed remarkable adsorption capacity of 182.2 and 164.1 mg/g toward the removal of BPA, which was several times higher than that of 60.2 mg/g for Cu-BDC MOF itself. The Langmuir, Freundlich, Temkin and D-R isotherm models were applied to analyze the experimental data and the results revealed that the Freundlich model describes the experimental data best. A kinetic study was carried out and it showed that the prepared nanomaterials could remove maximum amount of BPA from water in 30 min. The pseudo-first order, pseudo-second order and intra-particle diffusion models were applied to evaluate the kinetic data and the results suggested that the kinetics data could be well fitted to the pseudo-second order kinetic model. Additionally, the BAP adsorption process onto the hybrid nanocomposites was spontaneous and exothermic. The π-π interactions between the BPA and hybrid nanomaterials played a vital role during the BPA adsorption process. The higher adsorption capacity and water stability makes them a good candidate for water remediation applications.

Effects of carbonaceous nanomaterials on soil-grown soybeans under combined heat and insect stresses

Because carbonaceous nanomaterials (CNMs) are expected to enter soils, the exposure implications to crop plants and plant-microbe interactions should be understood. Most investigations have been under ideal growth conditions, yet crops commonly experience abiotic and biotic stresses. Little is known how co-exposure to these environmental stresses and CNMs would cause combined effects on plants. We investigated the effects of 1000 mg kg^-1 multiwalled carbon nanotubes (CNTs), graphene nanoplatelets (GNPs) and industrial carbon black (CB) on soybeans grown to the bean production stage in soil. Following seed sowing, plants became stressed by heat and infested with an insect (thrips). Consequently, all plants had similarly stunted growth, leaf damage, reduced final biomasses and fewer root nodules compared with healthy control soybeans previously grown without heat and thrips stresses. Thus, CNMs did not significantly influence the growth and yield of stressed soybeans, and the previously reported nodulation inhibition by CNMs was not specifically observed here. However, CNMs did significantly alter two leaf health indicators: the leaf chlorophyll a/b ratio, which was higher in the GNP treatment than in either the control (by 15 %) or CB treatment (by 14 %), and leaf lipid peroxidation, which was elevated in the CNT treatment compared with either the control (by 47 %) or GNP treatment (by 66 %). Overall, these results show that, while severe environmental stresses may impair plant production, CNMs (including CNTs and GNPs) in soil could additionally affect foliar health of an agriculturally important legume.

Uptake, transport, and effects of nano-copper exposure in zucchini (Cucurbita pepo)

Numerous studies on short term effects of copper-based nanomaterials on plants have been published, however investigations with plants grown in a complex soil medium are lacking. In this study Grey Zucchini (Cucurbita pepo) was grown in an environmental growth chamber using a 1:1 (v/v) potting mix native soil mixture amended with Kocide 3000, nCuO, bCuO, or Cu NPs. After 3 weeks Cu concentrations in the root, stem, and leaves of treated plants were significantly higher than control plants. This increase in Cu concentration did not adversely affect plant growth or chlorophyll production. The activity ascorbate peroxidase (APX) in the roots tissues of plants treated with Kocide 3000, nCuO, and bCuO decreased by at least 45%. Catalase (CAT) activity in root tissues of plants treated with 50 mg/kg of Cu NP decreased by 77%, while those treated at 200 mg/kg were reduced by 80%, compared to controls. The activity of APX and CAT in the leaves of all treated plants remained similar to control plants. Based on the endpoints used in this study, with the exception of a decrease in the accumulation of Zn and B in the roots, the exposure of zucchini to the tested copper compounds resulted in no negative effects.

Addition-omission of zinc, copper, and boron nano and bulk oxide particles demonstrate element and size -specific response of soybean to micronutrients exposure

Plant response to microelements exposure can be modulated based on particle size. However, studies are lacking on the roles of particle size and specific microelements in mixed exposure systems designed for plant nutrition, rather than toxicology. Here, an addition-omission strategy was used to address particle-size and element-specific effects in soybean exposed to a mixture of nano and bulk scale oxide particles of Zn (2 mg Zn/kg), Cu (1 mg Cu/kg) and B (1 mg B/kg) in soil. Compared to the control, mixtures of oxide particles of both sizes significantly (p < 0.05) promoted grain yield and overall (shoot and grain) Zn accumulation, but suppressed overall P accumulation. However, the mixed nano-oxides, but not the mixed bulk-oxides, specifically stimulated shoot growth (47%), flower formation (63%), shoot biomass (34%), and shoot N (53%) and K (42%) accumulation. Compared by particle size, omission of individual elements from the mixtures evoked significant responses that were nano or bulk-specific, including shoot growth promotion (29%) by bulk-B; inhibition (51%) of flower formation by nano-Cu; stimulation (57%) of flower formation by bulk-B; grain yield suppression (40%) by nano-Zn; B uptake enhancement (34%) by bulk-Cu; P uptake stimulation by nano-Zn (14%) or bulk-B (21%); residual soil N (80%) and Zn (42%) enhancement by nano-Cu; and residual soil Cu enhancement by nano-Zn (72%) and nano-B (62%). Zn was responsible for driving the agronomic (biomass and grain yield) responses in this soil, with concurrent ramifications for environmental management (N and P) and human health (Zn nutrition). Overall, compared to bulk microelements, nanoscale microelements played a greater role in evoking plant responses.

C60 Fullerols Enhance Copper Toxicity and Alter the Leaf Metabolite and Protein Profile in Cucumber

Abiotic and biotic stress induce the production of reactive oxygen species (ROS), which limit crop production. Little is known about ROS reduction through the application of exogenous scavengers. In this study, C60 fullerol, a free radical scavenger, was foliar applied to three-week-old cucumber plants (1 or 2 mg/plant) before exposure to copper ions (5 mg/plant). Results showed that C60 fullerols augmented Cu toxicity by increasing the influx of Cu ions into cells (170% and 511%, respectively, for 1 and 2 mg of C60 fullerols/plant). We further use metabolomics and proteomics to investigate the mechanism of plant response to C60 fullerols. Metabolomics revealed that C60 fullerols up-regulated antioxidant metabolites including 3-hydroxyflavone, 1,2,4-benzenetriol, and methyl trans-cinnamate, among others, while it down-regulated cell membrane metabolites (linolenic and palmitoleic acid). Proteomics analysis revealed that C60 fullerols up-regulated chloroplast proteins involved in water photolysis (PSII protein), light-harvesting (CAB), ATP production (ATP synthase), pigment fixation (Mg-PPIX), and electron transport ( Cyt b6f). Chlorophyll fluorescence measurement showed that C60 fullerols significantly accelerated the electron transport rate in leaves (13.3% and 9.4%, respectively, for 1 and 2 mg C60 fullerols/plant). The global view of the metabolic pathway network suggests that C60 fullerols accelerated electron transport rate, which induced ROS overproduction in chloroplast thylakoids. Plant activated antioxidant and defense pathways to protect the cell from ROS damaging. The revealed benefit (enhance electron transport) and risk (alter membrane composition) suggest a cautious use of C60 fullerols for agricultural application.

A comparative metagenomic and spectroscopic analysis of soils from an international point of entry between the US and Mexico

The Paso del Norte region is characterized by its dynamic industries and active agriculture. Throughout the years, urban and agricultural soils from this region have been exposed to xenobiotics, heavy metals, and excess of hydrocarbons. In this study, samples of urban [domestic workshops (DW)] and agricultural-intended (AI) soils from different sites of Ciudad Juárez, Mexico were evaluated for their fertility, element content, and microbial diversity. Chemical analyses showed that nitrites, nitrates, P, K, Mg, and Mn were predominantly higher in AI soils, compared to DW soils (p ≤ 0.05). The composition of soil microbial communities showed that Proteobacteria phylum was the most abundant in both soils (67%, p ≤ 0.05). In AI soils, Paracoccus denitrificans was reduced (p ≤ 0.05), concurring with an increment in nitrates, while the content of nitrogen was negatively correlated with the rhizobium group (r² = -0.65, p ≤ 0.05). In DW soils, the Firmicutes phylum represented up to ~25%, and the relative abundance of Proteobacteria strongly correlated with a higher Cu content (r² = 0.99, p ≤ 0.0001). The monotypic genus Sulfuricurvum was found only in oil-contaminated soil samples. Finally, all samples showed the presence of the recently created phylum Candidatus saccharibacteria. These results describe the productivity parameters of AI soils and its correlation to the microbial diversity, which are very important to understand and potentiate the productivity of soils. The data also suggest that soils impacted with hydrocarbons and metal(oid)s allow the reproduction of microorganisms with the potential to alleviate contaminated sites.

Toxicity of copper hydroxide nanoparticles, bulk copper hydroxide, and ionic copper to alfalfa plants: A spectroscopic and gene expression study

Bulk Cu compounds such as Cu(OH)₂ are extensively used as pesticides in agriculture. Recent investigations suggest that Cu-based nanomaterials can replace bulk materials reducing the environmental impacts of Cu. In this study, stress responses of alfalfa (Medicago sativa L.) seedlings to Cu(OH)₂ nanoparticle or compounds were evaluated. Seeds were immersed in suspension/solutions of a Cu(OH)₂ nanoform, bulk Cu(OH)₂, CuSO₄, and Cu(NO₃)₂ at 25 and 75 mg/L. Six days later, the germination, seedling growth, and the physiological and biochemical responses of sprouts were evaluated. All Cu treatments significantly reduced root elongation (average = 63%). The ionic compounds at 25 and 75 mg/L caused a reduction in all elements analyzed (Ca, K, Mg, P, Zn, and Mn), excepting for S, Fe and Mo. The bulk-Cu(OH)₂ treatment reduced K (48%) and P (52%) at 75 mg/L, but increased Zn at 25 (18%) and 75 (21%) mg/L. The nano-Cu(OH)₂ reduced K (46%) and P (48%) at 75 mg/L, and also P (37%) at 25 mg/L, compared with control. Confocal microscopy images showed that all Cu compounds, at 75 mg/L, significantly reduced nitric oxide, concurring with the reduction in root growth. Nano Cu(OH)₂ at 25 mg/L upregulated the expression of the Cu/Zn superoxide dismutase gene (1.92-fold), while ionic treatments at 75 mg/L upregulated (∼10-fold) metallothionein (MT) transcripts. Results demonstrated that nano and bulk Cu(OH)₂ compounds caused less physiological impairments in comparison to the ionic ones in alfalfa seedlings.

ZnO nanoparticles increase photosynthetic pigments and decrease lipid peroxidation in soil grown cilantro (Coriandrum sativum)

The growth of the nanotechnology industry has raised concerns about its environmental impacts. In particular, the effect on terrestrial plants, which are the primary producers of the global food chain, is widely debated. In this study, cilantro plants (Coriandrum sativum) were cultivated for 35 days in soil amended with ZnO nanoparticles (N ZnO), bulk ZnO (B ZnO) and ZnCl₂ (ionic/I Zn) at 0-400 mg/kg. Photosynthetic pigments, lipid peroxidation, ¹NMR-based metabolic, and ICP-based metallomic profiles were evaluated. All Zn compounds increased the chlorophyll content by at least 50%, compared to control. Only N ZnO at 400 mg/kg decreased lipid peroxidation by 70%. ¹NMR data showed that all compounds significantly changed the carbinolic-based compounds, compared with control. Highest root and shoot uptake of Zn was observed at B 400 and I 100, respectively. Results of this study corroborates that N ZnO at a concentration <400 mg/kg improved photosynthesis pigments and the defense response in cilantro plants cultivated in organic soil.

Finding the conditions for the beneficial use of ZnO nanoparticles towards plants-A review

Zinc oxide nanoparticles (ZnO NPs) have a wide range of applications in cosmetics, electrical, and optical industries. The wide range of applications of ZnO NPs, especially in personal care products, suggest they can reach major environmental matrices causing unforeseen effects. Recent literature has shown conflicting findings regarding the beneficial or detrimental effects of ZnO NPs towards terrestrial biota. In this review we carried out a comprehensive survey about beneficial, as well as detrimental aspects, of the ZnO NPs exposure toward various terrestrial plants. A careful scrutiny of the literature indicates that at low concentrations (about 50 mg/kg), ZnO NPs have beneficial effects on plants. Conversely, at concentrations above 500 mg/kg they may have detrimental effects, unless there is a deficiency of Zn in the growing medium. This review also remarks the critical role of the biotic and abiotic factors that may elevate or ameliorate the impact of ZnO NPs in terrestrial plants.

Exposure to Weathered and Fresh Nanoparticle and Ionic Zn in Soil Promotes Grain Yield and Modulates Nutrient Acquisition in Wheat ( Triticum aestivum L.)

This study evaluated weathered and fresh ZnO-nanoparticles and Zn-salt effects on nutrient acquisition and redistribution in wheat. Weathered and fresh ZnO-nanoparticles and Zn-salt significantly increased grain yield by 15% and 29%, respectively. Postharvest soil acidification indicated ZnO-nanoparticles dissolved during growth. Zn was significantly bioaccumulated from both Zn types, but with low root-to-shoot bioaccumulation efficiency: 24% and 20% for weathered nanoparticles and salt, and 48% and 30% for fresh nanoparticles and salt. Grain Zn content was increased 186% and 229% by weathered nanoparticles and salt, and 229% and 300% by fresh nanoparticles and salt. Shoot-to-grain translocation efficiency was high: 167% and 177% for weathered nanoparticles and salt, and 209% and 155% for fresh nanoparticles and salt. However, Zincon assay indicated grain Zn does not exist as ions. This study demonstrates that ZnO-nanoparticles and Zn-salt vary in their effects on nutrient acquisition in wheat, with relevance for biofortification of Zn for human nutrition.

Different forms of copper and kinetin impacted element accumulation and macromolecule contents in kidney bean (Phaseolus vulgaris) seeds

The relationship between engineered nanomaterials and plant biostimulants is unclear. In this study, kidney bean (Phaseolus vulgaris) plants were grown to maturity (90 days) in soil amended with nano copper (nCu), bulk copper (bCu), or copper chloride (CuCl₂) at 0, 50, or 100 mg kg^-1, then watered with 0, 10, or 100 μM of kinetin (KN). Seeds were harvested and analyzed via ICP-OES and biochemical assays. While seed production was largely unaffected, nutritional value was significantly impacted. Accumulation of Cu was enhanced by 5-10% from controls by Cu-based treatments. Fe was the only macro/microelement significantly altered by nCu, which was ~29% lower than seeds from untreated plants. All forms of Cu combined with 10 μM KN reduced Mg from 9 to 12%. Application of KN plus bCu or CuCl₂ elevated concentrations of Mn (31-41%) and S (19-22%), respectively. Protein content of seeds was stimulated (11-12%) by bCu, on average, and depressed by CuCl₂ + KN (up to 22%). Variations in sugar and starch content were insignificant, compared to controls. Our results indicate that the interaction Cu × KN significantly altered the nutritional value of common beans, which has potential implications to agricultural practices incorporating Cu as either a pesticide or fertilizer.