Construction of perylene diimide/CuS supramolecular heterojunction for the highly efficient visible light-driven environmental remediation

Modulating the Photocatalytic Capability of Organic Small Molecule Semiconductors for the Degradation of Different Antibiotics via Self-Assembly and Inorganic Hybridization

This study introduces a perylene diimide (PDI) small molecule in the photocatalytic degradation of antibiotics for the first time. Initially, we optimized its photoelectric performance through self-assembly to obtain an n-type photocatalyst (SA-PDI). Subsequently, WO3 and Cu2O were incorporated using a facile one-step method to prepare n-n type and n-p type organic-inorganic hybrid photocatalysts (PDI-WO3 and PDI-Cu2O). This approach simultaneously achieved self-assembly, metal ion doping, and inorganic hybridization, further modulating the photocatalytic properties of the materials. Studies indicated that PDI-WO3 operates via a type-II heterojunction mechanism, whereas PDI-Cu2O follows an S-scheme heterojunction mechanism. SA-PDI demonstrated superior degradation efficiency toward tetracycline hydrochloride (TCH), while PDI-WO3 exhibited enhanced activity for both TCH and doxycycline hydrochloride (DOX). In contrast, PDI-Cu2O showed higher efficacy for ciprofloxacin (CIP) and norfloxacin (NOF). These differences in photocatalytic performance are attributed to the distinct active species generated by each catalyst, aligning with the degradation requirements of specific antibiotics. Moreover, since all three materials are based on the PDI molecule, they are inherently compatible. Consequently, we directly mixed these materials to prepare composite photocatalysts for the simultaneous photocatalytic degradation of multiple antibiotics. In a simulated wastewater system, we systematically investigated the effects of inorganic ions, humic acid, and pH on the effectiveness of the composite photocatalysts in treating mixed antibiotic solutions. Ultimately, this study provides novel design strategies for organic-inorganic hybrid materials and demonstrates promising potential for practical applications in mitigating antibiotic contamination in real wastewater systems.

Influence of π-π interactions on organic photocatalytic materials and their performance

Currently, organic photocatalyst-based photocatalysis has garnered significant attention as an environmentally friendly and sustainable reaction system due to the preferable structural flexibility and adjustable optoelectronic features of organic photocatalysts. In addition, π-π interactions, as one of the common non-bonded interactions, play an important role in the structure and property adjustments of organic photocatalysts due to their unique advantages in modulating the electronic structure, facilitating charge migration, and influencing interfacial reactions. However, studies summarizing the relationship between the π-π interactions of organic photocatalysts and their photocatalytic performance are still rare. Therefore, in this review, we introduced the types of π-π interactions, characterization techniques, and different types of organic photocatalytic materials. Then, the influence of π-π interactions on photocatalysis and the modification strategies of π-π interactions were summarized. Finally, we discussed their influence on photocatalytic performance in different photocatalytic systems and analyzed the challenges and prospects associated with harnessing π-π interactions in photocatalysis. The review provides a clear map for understanding π-π interaction formation mechanism and its application in organic photocatalysts, offering useful guidance for researchers in this field.

Enhanced charge transfer and photocatalytic carbon dioxide reduction of copper sulphide@cerium dioxide p-n heterojunction hollow cubes

Hollow structure hybrids have gained considerable attention for their ability to reduce CO2 owing to their rich active sites, high gas adsorption ability, and excellent light utilization capacity. Herein, a template-engaged strategy was provided to fabricate copper sulphide@cerium dioxide (CuS@CeO2) p-n heterojunction hollow cube photocatalysts using Cu2O cubes as a sacrificial template. The sequential steps of loading of CeO2 nanolayer, sulfidation, and etching reaction facilitate the formation of CuS@CeO2 p-n heterojunction hollow cubes. Compared with the single CuS, CeO2, and their physical mixture, the CuS@CeO2 p-n heterojunction hollow cube photocatalyst expresses a higher performance toward photocatalytic CO2 reduction under solid-gas reaction conditions due to the faster separation of photogenerated charges. The further enhanced performance of CuS@CeO2 p-n heterojunction hollow cubes was achieved by decorating pt nanoparticles due to the fact that Pt nanoparticles had a high electron affinity and CO2 adsorption capacity, and the highest CO and CH4 yields of the optimized hybrid reached 195.8 μmol g-1 h-1 and 19.96 μmol g-1 h-1, respectively. This work might provide a strategy for designing and synthesizing efficient hollow heterostructured photocatalysts for solar energy conversion and utilization.

Facile and eco-friendly fabrication of biocompatible hydrogel containing CuS@Ser NPs with mechanical flexibility and photothermal antibacterial activity to promote infected wound healing

Bacterial infections can significantly impede wound healing and pose a serious threat to the patient's life. The excessive use of antibiotics to combat bacterial infections has led to the emergence of multi-drug-resistant bacteria. Therefore, there is a pressing need for alternative approaches, such as photothermal therapy (PTT), to address this issue. In this study, for the first time, CuS NPs with photothermal properties were synthesized using sericin as a biological template, named CuS@Ser NPs. This method is simple, green, and does not produce toxic and harmful by-products. These nanoparticles were incorporated into a mixture (XK) of xanthan gum and konjac glucomannan (KGM) to obtain XK/CuS NPs composite hydrogel, which could overcome the limitations of current wound dressings. The composite hydrogel exhibited excellent mechanical flexibility, photothermal response, and biocompatibility. It also demonstrated potent antibacterial properties against both Gram-positive and negative bacteria via antibacterial experiments and accelerated wound healing in animal models. Additionally, it is proved that the hydrogel promoted tissue regeneration by stimulating collagen deposition, angiogenesis, and reducing inflammation. In summary, the XK/CuS NPs composite hydrogel presents a promising alternative for the clinical management of infected wounds, offering a new approach to promote infected wound healing.

Incorporating Fe, Co co-doped graphene with PDI supermolecular for promoted photocatalytic activity: A story of electron transfer

Iron-cobalt dual single-atom anchoring on nitrogen-doped graphene (Fe_xCo_y-NG) improves the efficiency of migration and separation of photo-generated carriers. In this work, the perylene diimide (PDI) is self-assembled on the Fe_xCo_y-NG to form the Fe_xCo_y-NG/PDI composites by π-π interaction, which is reported for the first time. The bisphenol A (BPA) degradation of optimized 20% Fe_0.2Co_0.8-NG/PDI are nearly 100%, and the degradation rate is 1.5 and 12.7 times that of the self-assembled PDI and commercial-grade PDI. The high degradation performance by Fe_xCo_y-NG/PDI are mainly due to: (i) regulating the proportion of Fe-Co dual active sites content, so that it can achieve the synergistic interaction to facilitate the transfer of electrons in the catalytic reaction. (ii) PDI is uniformly dispersed by adding the Fe_xCo_y-NG, which increases the specific surface area of composites to adsorb more pollutants. Free radical trapping experiments and electron spin-resonance spectroscopy characterization confirmed that the O₂^-, OH, ¹O₂ and h⁺ are the main reactive species (RSs) for BPA degradation. Under the attack of RSs, BPA completes the processes of hydroxylation, demethylation, aromatization, ring-opening, and finally complete mineralization into CO₂ and H₂O. These results revealed that Fe_0.2Co_0.8-NG/PDI photocatalysts may be efficiently applied for the remediation of phenol contaminated natural waters.

MOFFeCo/B-CN composites achieve efficient degradation of antibiotics in a non-homogeneous concurrent photocatalytic-persulfate activation system

We synthesized an M_FeCoB_0.4CN_x% (MOF-Fe/Co nanosheets/boron-doped g-C₃N₄) composite catalyst for enhancing the concurrent photocatalytic-persulfate activation (CPPA) system and achieved efficient degradation of antibiotics. The role of MOF-Fe/Co is to activate persulfate, while boron-doped g-C₃N₄ can generate photogenerated electrons for the reduction of Co³⁺/Fe³⁺ to enhance the regeneration of the active center. The rate constant for Tetracycline degradation by the CPPA system was 4.74 and 7.54 times higher than the photocatalytic and persulfate-activated systems, respectively. This composite was shown to be practical and economically viable for antibiotic degradation. The degradation behavior was explored based on experiments, and molecular orbitals and Fukui functions were obtained by density functional theory calculations. Mechanisms were investigated using reactive oxygen species trapping studies and electron spin resonance, and the process was explained in terms of the charge population and electron density difference of MOF-Fe/Co nanosheets. The CPPA system is an ecologically benign technology for removing antibiotic-related risks to the environment and human health.

Rational construction of ZnO/CuS heterostructures-modified PVDF nanofiber photocatalysts with enhanced photocatalytic activity

PVDF/ZnO/CuS photocatalysts with ZnO/CuS heterojunctions were synthesized via electrospinning, hydrothermal, and ion-exchange techniques. As matrix materials, electrospun PVDF nanofibers are easy to be recycled and reused. ZnO nanorods anchored on PVDF nanofiber with high specific surface area provide abundant active reaction sites for photocatalysis. While the loaded CuS nanoparticles as a photosensitizer compensate the low quantum efficiency of ZnO and improve the visible-light photocatalytic efficiency. As a result, the PVDF/ZnO/CuS composited photocatalyst exhibits outstanding photocatalytic performance in exposure to UV and visible light owing to the suppressed recombination of electron-hole pairs and widened visible light absorption range. The kinetic constants of PVDF/ZnO/CuS nanocomposites under UV irradiation (9.01 × 10^-3 min^-1) and visible light (6.53 × 10^-3 min^-1) irradiation were 3.66 and 2.53 times higher than that of PVDF/ZnO (2.46 × 10^-3 min^-1 & 2.58 × 10^-3 min^-1), respectively. Furthermore, PVDF/ZnO/CuS nanocomposites demonstrate excellent robustness in terms of recycling and reuse, which is advantageous in practical applications.

Recent Progress of Metal Sulfide Photocatalysts for Solar Energy Conversion

Artificial photosynthetic solar-to-chemical cycles enable an entire environment to operate in a more complex, yet effective, way to perform natural photosynthesis. However, such artificial systems suffer from a lack of well-established photocatalysts with the ability to harvest the solar spectrum and rich catalytic active-site density. Benefiting from extensive experimental and theoretical investigations, this bottleneck may be overcome by devising a photocatalytic platform based on metal sulfides with predominant electronic, physical, and chemical properties. These tunable properties can endow them with abundant active sites, favorable light utilization, and expedited charge transportation for solar-to-chemical conversion. Here, it is described how some vital lessons extracted from previous investigations are employed to promote the further development of metal sulfides for artificial photosynthesis, including water splitting, CO₂ reduction, N₂ reduction, and pollutant removal. Their functions, properties, synthetic strategies, emerging issues, design principles, and intrinsic functional mechanisms for photocatalytic redox reactions are discussed in detail. Finally, the associated challenges and prospects for the utilization of metal sulfides are highlighted and future development trends in photocatalysis are envisioned.

CuS-Based Nanostructures as Catalysts for Organic Pollutants Photodegradation

The direct or indirect discharge of toxic and non-biodegradable organic pollutants into water represents a huge threat that affects human health and the environment. Therefore, the treatment of wastewater, using sustainable technologies, is absolutely necessary for reusability. Photocatalysis is considered one of the most innovative advanced techniques used for pollutant removal from wastewater, due to its high efficiency, ease of process, low-cost, and the environmentally friendly secondary compounds that occur. The key of photocatalysis technology is the careful selection of catalysts, usually semiconductor materials with high absorption capacity for solar light, and conductivity for photogenerated charge carriers. Among copper sulfides, CuS (covellite), a semiconductor with different morphologies and bandgap values, is recognized as an important photocatalyst used for the removal of organic pollutants (dyes, pesticides, pharmaceutics etc.) from wastewater. This review deals with recent developments in organic pollutant photodegradation, using as catalysts various CuS nanostructures, consisting of CuS NPs, CuS QDs, and heterojunctions (CuS/ carbon-based materials, CuS/organic semiconductor, CuS/metal oxide). The effects of different synthesis parameters (Cu:S molar ratios, surfactant concentration etc.) and properties (particle size, morphology, bandgap energy, and surface properties) on the photocatalytic performance of CuS-based catalysts for the degradation of various organic pollutants are extensively discussed.

Perylene diimide supermolecule (PDI) as a novel and highly efficient cocatalyst for photocatalytic degradation of tetracycline in water: A case study of PDI decorated graphitic carbon nitride/bismuth tungstate composite

Employing perylene diimide supermolecule (PDI) as metal-free cocatalyst, a novel PDI/g-C₃N₄/Bi₂WO₆ (PCB) photocatalyst was constructed for the effective degradation of antibiotics. Both the photocatalytic activity and photostability of g-C₃N₄/Bi₂WO₆ (gCB) were further improved after loading PDI. Under simulated sunlight illumination, the apparent rate constant of tetracycline (TC) degradation by PCB reached 2.6 times that of gCB. The photocatalytic activity of PCB still kept over 80% after 4 cycle experiments, while gCB only remained around 21%. The superior activity of PCB was ascribed to the synergism between the extended visible light absorption range through the participation of PDI cocatalyst and facilitated gCB-to-PDI photoelectron transfer. TC would finally be transformed into non-toxic ring opening products and mineralized. This work demonstrated that PDI was an excellent metal-free cocatalyst and exhibited great potential to boost the activity of photocatalysts.