Free-standing 3D core-shell architecture of Ni3S2@NiCoP as an efficient cathode material for hybrid supercapacitors

NiCoP cocatalyst modified g-C3N4 as ohmic junction photocatalyst for efficient degradation of tetracycline under visible light

Increasing the electron-hole recombination rate in g-C3N4 can effectively improve its photocatalytic performance. In this work, NiCoP/g-C3N4 (NCP/PCN) composites with ohmic junction were formed by embedding granular NiCoP in irregularly porous g-C3N4. There was almost no barrier between the metal and the semiconductor in ohmic junction, which made it easier for electrons to slip from PCN to NCP along the curved energy band, and NCP acted as an electron collector to rapidly capture the slipping electrons. In addition, porous g-C3N4 prepared by supramolecular self-assembly could provide a shorter diffusion path for electrons. Thus, the electron-hole was effectively separated and the photocatalytic performance was improved. The band electronic structure and existence of ohmic junction in 7-NCP/PCN composite were demonstrated by XPS, ESR and DFT calculation. Finally, a reasonable photocatalytic degradation mechanism and possible tetracycline degradation path were proposed. This work has significant potential for providing an effective method for the design of non-precious metal photocatalysts.

High-mass-loading cobalt iron phosphide@nickel vanadium layered double hydroxide heterogeneous nanosheet arrays for hybrid supercapacitors

Designing multidimensional heterostructures on flexible substrates is an efficient approach to resolve the low energy density of supercapacitors. Herein, a three-dimensional (3D) porous cobalt iron phosphide (CoFeP)@nickel vanadium-layered double hydroxide (NiV-LDH) heterostructure has been prepared anchored on carbon cloth (CC) substrate. In this nanoarchitecture, NiV-LDH nanosheets are densely wrapped on the surface of CoFeP nanosheets, which forms a hierarchically porous framework with an enlarged surface area and accessible pore channels. Benefiting from the strong interaction and synergistic effect between CoFeP and NiV-LDH, the well-defined heterostructure can realize simultaneously rich redox active sites, rapid reaction dynamics, and good structural stability. Thus, the binder-free CoFeP@NiV-LDH electrode with a high mass loading of 6.47 mg cm-2 displays a significantly increased specific capacity of 903.1C g-1 (2.35C cm-2) at 1 A g-1 and enhanced rate capability when compared to pristine CoFeP and NiV-LDH. Additionally, the assembled hybrid supercapacitor (HSC) yields an energy density of 77.9 Wh kg-1/0.98 Wh cm-2 and excellent long-term stability. This research proposes a rational route for designing heterogeneous micro-/nanoarchitectures with commercial-level mass loading for the practical application of high-energy-density supercapacitors.

Phosphorus/sulfur co-doped heterogeneous NiCoPxSy nanoarrays boosting overall water splitting

In the large-scale implementation of renewable energy devices, the availability of stable and highly catalytic non-precious metal catalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is crucial. Meanwhile, integrating bifunctional electrocatalysts simultaneously on both the anode and cathode still faces challenges. To address this, a stepped preparation strategy was adopted on a nickel foam (NF) substrate to synthesize P, S co-doped NiCoPxSy nanowire array catalysts. The prepared NiCoPxSy catalysts demonstrated a small Tafel slope of 72.5 mV dec-1 for HER and 72.3 mV dec-1 for OER by requiring only 37 mV (326 mV) overpotential to achieve a current density of 10 mA cm-2 (50 mA cm-2). Moreover, when assembled into an electrolytic cell in 1 M KOH, the NiCoPxSy catalysts achieved a low voltage of 1.55 V at 10 mA cm-2 current density and exhibited long-term stability. The outstanding electrocatalytic performance can be attributed to the influence of doped anions on the electronic states and distribution among different atoms, which thereby positively affected the electrocatalytic activity. This research provides an effective method for designing innovative catalysts and paving the way to produce clean energy.

In-situ electrodeposited Co0.85Se@Ni3S2 heterojunction with enhanced performance for supercapacitors

Rational design of porous heterostructured electrode materials for high-performance supercapacitors remains a big challenge. Herein, we report the in situ synthesis of Co0.85Se@Ni3S2 hybrid nanosheet arrays supported on carbon cloth (CC) substrate though an efficient two-step electrodeposition method. Compared with pure Co0.85Se and Ni3S2, the well-defined Co0.85Se@Ni3S2 heterojunction possesses enriched active sites, improved electrical conductivity, and reduced ion diffusion resistance. Benefiting from its hierarchically porous nanostructure and the synergistic effect of Co0.85Se and Ni3S2, the as-synthesized Co0.85Se@Ni3S2 electrode delivers a gravimetric capacitance (Cg)/volumetric capacitance (Cv) of 1644.1F g-1/3161.7F cm-3 at 1 A g-1, outstanding rate capability of 60.7% capacitance retention at 20 A g-1, as well as good cycling performance of 87.8% capacitance retention after 5000 cycles. Additionally, a hybrid supercapacitor (HSC) device presents a maximum energy density (E) of 65.7 Wh kg-1 at 696.2 W kg-1 with 93.3% cyclic durability after 15,000 cycles. Thus, this work proposes a simple and effective strategy to fabricate porous heterojunctions as high-performance electrode materials for energy storage devices.

Facile Route to Achieve a Hierarchical CuO/Nickel-Cobalt-Sulfide Electrode for Energy Storage

Herein, a novel self-supporting CuO/nickel-cobalt-sulfide (NCS) electrode was designed in a two-step electrodeposition technique followed by a calcination process. Three-dimensional copper foam (CF) was exploited as the current collector and spontaneous source for the in situ preparation of the CuO nanostructures, which ensured sufficient deposition space for the subsequent NCS layer, thus forming abundant electrochemical active sites. Such a hierarchical structure is conducive to providing a smooth path for promoting electronic transmission. Therefore, the optimized CuO/NCS electrode exhibits outstanding energy storage capability with extremely superior specific capacitance (Cs) of 7.08 F cm-2 at 4 mA cm-2 and coulombic efficiency of up to 94.83%, as well as excellent cycling stability with capacitance retention of 83.33% after 5000 cycles. The results presented in this work extend our horizons to fabricate novel hierarchical structured electrodes applied to energy storage devices.

Constructing nickel sulfide @ nickel boride hybrid nanosheet arrays with crystalline/amorphous interfaces for supercapacitors

Designing a heterostructure with unique morphology and nanoarchitecture is regarded as an efficient strategy to achieve high-energy-density supercapacitors (SCs). Herein, a rational nickel sulfide @ nickel boride (Ni9S8@Ni2B) heterostructure is in situ synthesized on carbon cloth (CC) substrate via a simple electrodepositon strategy followed by a chemical reduction method. The three-dimensional hierarchically porous Ni9S8@Ni2B nanosheet arrays, consisting of crystalline Ni9S8 nanosheets and amorphous Ni2B nanosheets, can expose ample electroactive centers, shorten ion diffusion distance, and buffer volume changes during charging/discharging process. More importantly, the generation of crystalline/amorphous interfaces in the Ni9S8@Ni2B composite modulates its electrical structure and improves electrical conductivity. Owing to the synergy of Ni9S8 and Ni2B, the as-synthesized Ni9S8@Ni2B electrode acquires a specific capacity of 901.2C g-1 at 1 A g-1, a sound rate capability (68.3% at 20 A g-1), along with good cycling performance (79.7% capacity retention over 5000 cycles). Additionally, the assembled Ni9S8@Ni2B//porous carbon asymmetric supercapacitor (ASC) exhibits a cell voltage of 1.6 V and a maximum energy density of 59.7 Wh kg-1 at 805.2 W kg-1. These findings might offer a simple and innovative approach to fabricate advanced electrode materials for high-performance energy storage systems.

Mushroom-like cobalt nickle metaphosphate@nickel diselenide core-shell nanorods for asymmetric supercapacitors

Although transition metal metaphosphates (TMPOs) display special physical/chemical features and high theoretical capacities, their applications for supercapacitors (SCs) are still restricted by their low energy densities and inferior cycling stability. Herein, a novel strategy has been proposed to address these issues through in situ construction of cobalt nickle metaphosphate (Co_0.2Ni_0.8(PO₃)₂)@nickel diselenide (NiSe₂) core-shell heterostructure on carbon paper (CP) as a self-supporting flexible electrode for SCs. Particularly, this unique mushroom-like porous nanoarchitecture assembled by one-dimensional (1D) Co_0.2Ni_0.8(PO₃)₂ nanorods and zero-dimensional (0D) NiSe₂ nanospheres can expose abundant active sites and afford multi-dimensional channels, which favors rapid electron ions/electron transfer, accelerates the reaction kinetics, and alleviates volume changes during charging/discharging processes. Profiting from its well-aligned 1D/0D nanostructure and strong synergistic effect between Co_0.2Ni_0.8(PO₃)₂ and NiSe₂, the Co_0.2Ni_0.8(PO₃)₂@NiSe₂/CP electrode delivers a specific capacity of 219.4 mAh/g/0.414 mAh cm^-2 at 1 A/g and good cycling stability with capacity retention of 90.7% after 5000 cycles, outperforming many previously reported TMPO-based electrodes in literature. Impressively, an asymmetric supercapacitor (ASC) device assembled with Co_0.2Ni_0.8(PO₃)₂@NiSe₂ as cathode and porous carbon as anode achieves an energy density of 69.2 Wh kg^-1 at 736.0 W kg^-1 and maintains a capacity retention of 97.6% after 20,000 charge-discharge cycles. This work provides an efficient approach to design multi-dimensional hybrid nanomaterials for high-performance SCs.