Local photothermal and photoelectric effect synergistically boost hollow CeO2/CoS2 heterostructure electrocatalytic oxygen evolution reaction

Breaking the symmetry and d-orbital optimization at Co site in CoNC as bifunctional air catalysts for rechargeable liquid and flexible solid-state Zn-air batteries

By utilizing abundant earth metals and incorporating them into N-doped carbon electrocatalysts, the electrochemical kinetics and stability of oxygen reactions in zinc-air batteries (ZABs) are enhanced. However, several challenges remain. We introduce a method that focuses on microenvironmental modulation to precisely adjust the Cr-doped Co NC (Cr-Co NC) catalyst, thereby enhancing its inherent electrochemical activity and durability, and improving the oxygen reaction process. The unique Cr-N-Co configuration in the Cr-CoNC-1.00 catalyst weakens the adsorption strength of *OH intermediates by engineering the Co d-band center, thus lowering the energy barrier for both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER). The precisely engineered Cr-CoNC-1.00 catalyst demonstrates robust ORR and OER performance, achieving an ORR half-wave potential (E1/2) of 0.865 V and an OER overpotential (EJ=10) of 1.64 V (vs RHE), rivaling that of noble-metal catalysts (Pt/C for ORR and RuO2 for OER). In practical applications, the rechargeable liquid ZABs equipped with Cr-CoNC-1.00 delivered exceptional results (peak power density: 110 mW·cm-2, specific capacity: 816 mA·h·g-1 Zn at 10 mA·cm-2, with over 208 h of charge-discharge cycle stability). Additionally, the flexible solid-state ZABs achieved an open-circuit voltage of 1.4 V, demonstrated remarkable charge-discharge stability for over 12 h, and maintained performance under various bending conditions. This approach highlights the significant potential for developing high-efficiency bifunctional catalysts suitable for flexible zinc-air batteries.

Abundant Amorphous/Crystalline Interfaces of C/A-NixP/NiOH Heterojunction Catalyst for Efficient Urea Oxidation Reaction

Replacing the kinetically slow oxygen evolution reaction (OER) with urea electro-oxidation significantly reduces the energy requirement for electrolysis of water. However, designing and optimizing efficient electrocatalysts for the industrial application of urea oxidation coupled to hydrogen production remains a challenge. Herein, we construct a C/A-NixP/NiOH heterojunction catalyst with actually abundant amorphous/crystalline interfaces for the urea oxidation reaction (UOR) by an interfacial-sequential treatment method of electrodeposition and low-temperature gas-phase phosphatization on carbon cloth (CC). Remarkably, in UOR, the C/A-NixP/NiOH catalyst required only 1.332 V to reach a current density of 10 mA cm-2 with negligible potential decay over 12 h. The excellent performance is attributed to the synergistic interaction between the inner amorphous NiOH layer and the outer crystalline NixP layer, as well as the abundant amorphous/crystalline interface, an interfacial structure that can expose more active sites as well as enhance the intrinsic activity, thus improving the reaction kinetics and stability of UOR. This work paves the way for the development of low-cost and high-efficiency catalysts for urea oxidation.

Local Electronic Regulation by Oxygen Coordination with Single- Atomic Iridium on Ultrathin Cobalt Hydroxide Nanosheets for Electrocatalytic Oxygen Evolution

Rationally optimizing the atomic and electronic structure of electrocatalysts is an effective strategy to improve the activity of the electrocatalytic oxygen evolution reaction (OER), yet it remains challenging. In this work, atomic heterointerface engineering is developed to accelerate OER by decorating iridium atoms on low-crystalline cobalt hydroxide nanosheets (Ir-Co(OH)x) via oxygen-coordinated bonds to modulate the local electronic structure. Leveraging detailed spectroscopic characterizations, the Ir species were proved to promote charge transfer through Ir-O-Co coordination between the Ir atom and the Co(OH)x support. As a result, the optimized Ir-Co(OH)x exhibits excellent electrocatalytic OER activity with a low overpotential of 251 mV to drive 10 mA cm-2, which is 63 mV lower than that of pristine Co(OH)x. The experimental results and density functional theory calculations reveal that the isolated Ir atoms can regulate the local coordination environment and electronic configuration of Co(OH)x, thus accelerating the catalytic OER kinetics. This work provides an atomistic strategy for the electronic modulation of metal active sites in the design of high-performance electrocatalysts.

NiFe on CeO2, TiO2, and ZrO2 Supports as Efficient Oxygen Evolution Reaction Catalysts in Alkaline Media

The high cost and low energy efficiency of conventional water electrolysis methods continue to restrict the widespread adoption of green hydrogen. Anion exchange membrane (AEM) water electrolysis is a promising technology that can produce hydrogen using cost-effective transition-metal catalysts at high energy efficiency. Herein, we investigate the catalytic activity of nickel and iron nanoparticles dispersed on metal-oxide supports for the oxygen evolution reaction (OER), employing electrochemical testing with an anion exchange ionomer to evaluate their potential for application in AEM electrolyzers. We report the electrochemical performance of NiFe nanoparticles of varying Ni:Fe ratios on CeO2 for OER reaction, assessing the overpotential, Tafel slope, and electrochemical stability of the catalysts. Our findings indicate that Ni90Fe10 has the highest catalytic activity as well as stability. To further understand the role of different supports, we assess the electrocatalytic performance of Ni90Fe10 nanoparticles on two more supports - TiO2 and ZrO2. While CeO2 has the lowest overpotential, the other supports also show high activity and good performance at high current densities. TiO2 exhibits superior stability and its overpotential after chronopotentiometry measurements approaches that of CeO2 at high current densities. These results underscore the critical role of iron addition in enhancing nickel nanoparticles' catalytic activity and further emphasize the importance of metal oxide supports in improving catalyst stability and performance.

Water oxidation on a sustainable polymeric proton relay: the role of post-phosphating of an oxide sub-layer on PCET

Lagging proton transfer (PT) toward electron transfer (ET) during multi-step proton-coupled electron transfer (PCET) is one of the humble approaches toward complete biomimicking of artificial leaves. In this work, we synthesized a typical sustainable polymeric interface (poly L-lysine) to investigate the effect of post-phosphating of the metal oxide substrate (NF/CoMoO4) on the yield of PCET during the electrocatalytic water oxidation reaction (WOR) in alkaline medium. The details of the PCET mechanism are unraveled using the kinetic isotope effect (KIE), proton inventory, Tafel slopes, pH studies, and high-frequency transmission line (Gerischer) impedance. The appealing Gerischer feature unveils an electrochemical reaction preceded and followed by a chemical exchange reaction (CEC mechanism), indicating a proton hopping mechanism that practically blocks natural diffusion of the protonic species (H+ and H2O) and the role of the interfacial phosphate#p-Lys hydrogen bond network (HBN) in PCET. The interfacial HBN can serve as a flexible proton hook to delocalize protons and may polarize the O-O bond, thereby facilitating the overall PCET for the progress of O-O bond formation. Poly L-lysine improved the response stability of the PCET catalyst through corrosion protection of the metallic substrate and also prevention of the spatiotemporal accumulation of protons as a surface corrosion agent. The results show a non-concerted PCET mechanism with the first ET step as the RDS of the heterogeneous WOR.

NiMOF-Derived MoSe2/NiSe Hollow Nanoflower Structures as Electrocatalysts for Hydrogen Evolution Reaction in Alkaline Medium

Metal-organic frameworks (MOFs) are crystalline porous materials for storage and energy conversion applications with three-dimensional pore structure, high porosity, and specific surface area, which are widely utilized in electrocatalysis. Herein, MoSe2/NiSe composites were synthesized by selenization reaction using NiMOF as the precursor. The composites were hollow nanoflower structures with a synergistic effect between MoSe2 and NiSe to promote rapid electron transfer, which exhibited good hydrogen evolution reaction performance in an alkaline medium. At a current density of 10 mA/cm2, the HER overpotential reaches 80 mV, the Tafel slope is 33.86 mV/dec, and the material has good stability, with polarization curves remaining essentially unchanged after 3000 cycles. These results indicate that the method has a promising application in the preparation of efficient and sustainable catalysts for hydrogen production in alkaline medium.

Thermoresponsive and Substrate Self-Cycling Nanoenzyme System for Efficient Tumor Therapy

Cerium oxide (CeO2-x) performs well in photothermal and catalytic properties due to its abundance of oxygen vacancies. Based on this, we designed a thermosensitive therapeutic nanoplatform to achieve continuous circular drug release in tumor. It can solve the limitation caused by insufficient substrate in the process of tumor treatment. Briefly, CeO2-x and camptothecin (CPT) were wrapped in an agarose hydrogel, which could be melted by the photothermal effect of CeO2-x. At the same time, the local temperature increase provided photothermal treatment, which could induce the apoptosis of tumor cell. After that, CPT was released to damage the DNA in tumor cells to realize chemical treatment. In addition, CPT could active nicotinamide adenine dinucleotide oxidase to react with O2 to increase the intracellular H2O2. After that, the exposed CeO2-x could catalyze H2O2 to generate cytotoxic reactive oxygen species for chemodynamic therapy. More importantly, CeO2-x could catalyze H2O2 to produce O2, which could combine with the catalytic action of CPT to construct a substrate self-cycling nanoenzyme system. Overall, this self-cycling nanoplatform released hypoxia in the tumor microenvironment and built a multimode tumor treatment, which achieved an ideal antitumor affect.

The Role of Photo in Oxygen Evolution Reaction: A Review

Photo enhanced oxygen evolution reaction has recently emerged as an advanced strategy with great application prospects for highly efficient energy conversion and storage. In the course of photo enhanced oxygen evolution reactions, the other works focus has predominantly centered on catalysts while inadvertently overlooking the pivotal role of photo. Consequently, this manuscript embarks upon a comprehensive review of recent advancements in photo-driven, aiming to illuminate this critical dimension. A detailed introduction to the photothermal effect, photoelectronic effect, photon-induced surface plasmon resonance, photo and heterojunction, photo-induced reversible geometric conversion, photo-induced energy barrier reduction, photo-induced chemical effect, photo-charging, and the synthesis of laser/photo-assisted catalysts, offering prospects for the development of each case is provided. A detailed introduction to the photothermal effect, photoelectronic effect, photon-induced surface plasmon resonance, photo and heterojunction, photo-induced reversible geometric conversion, photo-induced energy barrier reduction, photo-induced chemical effect, photo-charging, and the synthesis of laser/photo-assisted catalysts is provided. At the same time, the overpotential and Tafel slope of some catalysts mentioned above at 10 mA cm-2 is collected, and calculated the lifting efficiency of light on them, offering prospects for the development of each case.

Multiple-perspective design of hollow-structured cerium-vanadium-based nanopillar arrays for enhanced overall water electrolysis

It is critical and challenging to develop highly active and low cost bifunctional electrocatalysts for the hydrogen/oxygen evolution reaction (HER/OER) in water electrolysis. Herein, we propose cerium-vanadium-based hollow nanopillar arrays supported on nickel foam (CeV-HNA/NF) as bifunctional HER/OER electrocatalysts, which are prepared by etching the V metal-organic framework with Ce salt and then pyrolyzing. Etching results in multidimensional optimizations of electrocatalysts, covering substantial oxygen vacancies, optimized electronic configurations, and an open-type structure of hollow nanopillar arrays, which contribute to accelerating the charge transfer rate, regulating the adsorption energy of H/O-containing reaction intermediates, and fully exposing the active sites. The reconstruction of the electrocatalyst is also accelerated by Ce doping, which results in highly active hydroxy vanadium oxide interfaces. Therefore, extremely low overpotentials of 170 and 240 mV under a current density of 100 mA cm-2 are achieved for the HER and OER under alkaline conditions, respectively, with long-term stability for 300 h. An electrolysis cell with CeV-HNA/NF as both the cathode and anode delivers a small voltage of 1.53 V to achieve water electrolysis under 10 mA cm-2, accompanied by superior durability for 150 h. This design provides an innovative way to develop advanced bifunctional electrocatalysts for overall water electrolysis.

Generic heterostructure interfaces bound to Co9S8 for efficient overall water splitting supported by photothermal

The increase of reaction temperature of electrocatalysts and the construction of heterogeneous structures is regarded as an efficient method to improve the electrocatalytic water splitting activity. Here, we report an approach to enhance the local heat and active sites of the catalyst by building a heterostructure with Co9S8 to significantly improve its electrocatalytic performance. The as-fabricated Co9S8@Ce-NiCo LDH/NF electrode possesses a notable photothermal ability, as it effectively converts near-infrared (NIR) light into the local heat, owing to its significant optical absorption. Leveraging these favorable qualities, the prepared Co9S8@Ce-NiCo LDH/NF electrode showed impressive performance in both hydrogen evolution reaction (HER) (η100 = 144 mV) and oxygen evolution reaction (OER) (η100 = 229 mV) under NIR light. Compared to the absence of the NIR light, the presence of NIR irradiation leads to a 24.6 % increase in catalytic efficiency for HER and a 15.8 % increase for OER. Additionally, other dual-functional electrocatalysts like NiCo-P, NiFeMo, and NiFe(OH)x also demonstrated significantly enhanced photothermal effects and improved catalytic performance owing to the augmented photothermal conversion when combined with Co9S8. This work offers novel pathways for the development of photothermal-electrocatalytic systems that facilitate economically efficient and energy-conserving overall water splitting processes.

Hollow CoVOx/Ag nanoprism with tailored electronic structure for high efficiency oxygen evolution reaction

Developing high-active and inexpensive electrocatalysts for oxygen evolution reaction (OER) is very important in the field of water splitting. The catalytic performance of electrocatalysts can be significantly improved by optimizing the electronic structure and designing suitable nanostructure. In this work, we represent the synthesis of hollow CoVOx/Ag-5 for OER. Due to the interaction of CoVOx and Ag nanoparticles, the electronic structure is optimized to improve the intrinsic catalytic activity. Additionally, the extrinsic catalytic activity of CoVOx/Ag is enhanced by the abundant active sites from the hollow structure. As a result, the CoVOx/Ag-5 demonstrates significantly enhanced OER catalytic activity with a low overpotential of 247 mV at 10 mA cm-2. In addition, it also exhibits excellent durability, without obvious attenuation in performance after continuous operation for 60 h. Furthermore, the catalyst can enable full water splitting with appropriate 100 % Faraday efficiency, demonstrating its practical application.

Engineering improved strategies for spinel cathodes in high-performing zinc-ion batteries

The development of high-performing cathode materials for aqueous zinc-ion batteries (ZIBs) is highly important for the future large-scale energy storage. Owing to the distinctive framework structure, diversity of valences, and high electrochemical activity, spinel materials have been widely investigated and used for aqueous ZIBs. However, the stubborn issues of low electrical conductivity and sluggish kinetics plague their smooth applications in aqueous ZIBs, which stimulates the development of effective strategies to address these issues. This review highlights the recent advances of spinel-based cathode materials that include the configuration of aqueous ZIBs and corresponding reaction mechanisms. Subsequently, the classifications of spinel materials and their properties are also discussed. Then, the review mainly summarizes the effective strategies for elevating their electrochemical performance, including their morphology and structure design, defect engineering, heteroatom doping, and coupling with a conductive support. In the final section, several sound prospects in this fervent field are also proposed for future research and applications.

Heteroatom Doping Promoting CoP for Driving Water Splitting

CoP nanomaterials have been extensively regarded as one of the most promising electrocatalysts for overall water splitting due to their unique bifunctionality. Although the great promise for future applications, some important issues should also be addressed. Heteroatom doping has been widely acknowledged as a potential strategy for improving the electrocatalytic performance of CoP and narrowing the gap between experimental study and industrial applications. Recent years have witnessed the rapid development of heteroatom-doped CoP electrocatalysts for water splitting. Aiming to provide guidance for the future development of more effective CoP-based electrocatalysts, we herein organize a comprehensive review of this interesting field, with the special focus on the effects of heteroatom doping on the catalytic performance of CoP. Additionally, many heteroatom-doped CoP electrocatalysts for water splitting are also discussed, and the structure-activity relationship is also manifested. Finally, a systematic conclusion and outlook is well organized to provide direction for the future development of this interesting field.

Electrochemical sensor for hydrogen sulfide detection using electrocatalysis-assisted amplification and chemical reaction-mediated signal enhancement

An ultrasensitive electrochemical biosensing platform has been designed by combining electrocatalysis-assisted H2S amplification with a chemical reaction-mediated electrochemical signal-boosted system for H2S detection based on Cu-Mn(OH)2 hexagonal nanorings. The signal amplification is initiated by an electrocatalysis reaction that can grasp specific H2S substrates and further highly amplify electrochemical signals. Then, the unique chemical reaction is powered by copper ion and generates a large amount of electroactive CuxS products on the electrode surface, thus achieving the multiple amplification of H2S detection. Finally, the Cu-Mn(OH)2 loaded with plenty of electroactive CuxS can be captured on the electrode for further improving the electrochemical signal thus obtaining ultra-high sensitive determination of H2S. The established electrochemical biosensing platform displays a wide analytical range of 0.1 μM to 265 μM with a low detection limit of 0.096 μM. The satisfactory selectivity allows the electrochemical sensor to distinguish H2S from other interfering substances without any complicated pretreatment, even in complex tumor cell samples. Thus, our designed electrocatalysis-assisted amplification strategy offers a powerful analysis toolkit for the early determination of H2S-related disease in clinical diagnosis.

Enhanced Electrocatalytic Water Oxidation by Interfacial Phase Transition and Photothermal Effect in Multiply Heterostructured Co9 S8 /Co3 S4 /Cu2 S Nanohybrids

The rational design of advanced nanohybrids (NHs) with optimized interface electronic environment and rapid reaction kinetics is pivotal to electrocatalytic schedule. Herein, we developed a multiple heterogeneous Co9 S8 /Co3 S4 /Cu2 S nanoparticle in which Co3 S4 germinates between Co9 S8 and Cu2 S. Using high-angle annular-dark-field imaging and theoretical calculation, it was found that the integration of Co9 S8 and Cu2 S tends to trigger the interface phase transition of Co9 S8 , leading to Co3 S4 interlayer due to the low formation energy of Co3 S4 /Cu2 S (-7.61 eV) than Co9 S8 /Cu2 S (-5.86 eV). Such phase transition not only lowers the energy barrier of oxygen evolution reaction (OER, from 0.335 eV to 0.297 eV), but also increases charge carrier density (from 7.76×1014 to 2.09×1015  cm-3 ), and creates more active sites. Compared to Co9 S8 and Cu2 S, the Co9 S8 /Co3 S4 /Cu2 S NHs also demonstrate notable photothermal effect that can heat the catalyst locally, offset the endothermic enthalpy change of OER, and promote carrier migrate, reaction intermediates adsorption/deprotonation to improve reaction kinetics. Profiting from these favorable factors, the Co9 S8 /Co3 S4 /Cu2 S catalyst only requires an OER overpotential of 181 mV and overall water splitting cell voltage of 1.43 V to driven 10 mA cm-2 under the irradiation of near-infrared light, outperforming those without light irradiation and many reported Co-based catalysts.

Low-Dimensional High-Entropy Alloys for Advanced Electrocatalytic Reactions

Low-dimensional high-entropy alloy (HEA) nanomaterials are widely employed as electrocatalysts for energy conversion reactions, due to their inherent advantages, including high electron mobility, rich catalytically active site, optimal electronic structure. Moreover, the high-entropy, lattice distortion, and sluggish diffusion effects also enable them to be promising electrocatalysts. A thorough understanding on the structure-activity relationships of low-dimensional HEA catalyst play a huge role in the future pursuit of more efficient electrocatalysts. In this review, we summarize the recent progress of low-dimensional HEA nanomaterials for efficient catalytic energy conversion. By systematically discussing the fundamentals of HEA and properties of low-dimensional nanostructures, we highlight the advantages of low-dimensional HEAs. Subsequently, we also present many low-dimensional HEA catalysts for electrocatalytic reactions, aiming to gain a better understanding on the structure-activity relationship. Finally, a series of upcoming challenges and issues are also thoroughly proposed as well as their future directions.

Synergistic Coupling of Charge Extraction and Sinking in Cu5FeS4/Ni3S2@NF for Photoassisted Electrocatalytic Oxygen Evolution

Exploring low-cost and high-performance oxygen evolution reaction (OER) catalysts has attracted great attention due to their crucial role in water splitting. Here, a bifunctional Cu5FeS4/Ni3S2@NF catalyst was in situ formed on a nickel (Ni) foam toward efficient photoassisted electrocatalytic (P-EC) OER, which displays an ultralow overpotential of 260 mV at 30 mA cm-2 in alkaline solution, outperforming most previously reported Ni-based catalysts. It also shows great potential in degradation of antibiotics as an alternative anode reaction to OER owing to the prompt transfer of photogenerated holes. The photocurrent test and transient photovoltage spectroscopy indicate that the synergistic coupling of charge extraction and sinking effects in Cu5FeS4 and Ni3S2 is critical for boosting the OER activity via photoassistance. Electrochemical active surface area and electrochemical impedance spectroscopy tests further prove that the photogenerated electromotive force can effectively compensate the overpotential of OER. This work not only provides a good guidance for integrating photocatalysis and electrocatalysis, but also indicates the key role of synergistic extraction and utilization of photogenerated charge carriers in P-EC.

Nitrogen-doped Fe2O3/NiTe2 as an excellent bifunctional electrocatalyst for overall water splitting

The development of inexpensive, high efficiency electrocatalysts is a major challenge for electrolytic water to hydrogen production. Herein, an efficient porous nanoblock catalyst N-doped Fe₂O₃/NiTe₂ heterojunction for overall water splitting is reported. Notably, the obtained 3D self-supported catalysts exhibit good hydrogen evolution. reaction (HER) activity and oxygen evolution reaction (OER) properties in alkaline solution (only 70 mV and 253 mV of overpotential are needed to provide 10 mA cm^-2 current density, respectively). This is mainly due to the N-doped electronic structure optimized, the strong electronic interaction between Fe₂O₃ and NiTe₂ that facilitates rapid electron transfer, the porous structure which allows the catalyst to have large surface area for effective gas release, and their synergistic effect. When used as a dual function catalyst with overall water splitting, it achieved a current density of 10 mA cm^-2 under 1.54 V with good durability (at least 42 h). The present work provides a new methodology for the study of high-performance, low-cost, and corrosion-resistant bifunctional electrocatalysts.

Lacunary polyoxometalate oriented construction of dispersed Ni3S2 confined in WO3 for electrocatalytic water splitting

Manufacturing low-cost, high-performance and earth-rich catalysts for hydrogen evolution (HER) and oxygen evolution reactions (OER) is critical to achieving sustainable green hydrogen production. Herein, we utilize lacunary Keggin-structure [PW₉O₃₄]^9- (PW₉) as a molecular pre-assembly platform to anchor Ni within a single PW₉ molecule by vacancy-directed and nucleophile-induced effects for the uniform dispersion of Ni at the atomic level. The chemical coordination of Ni with PW₉ can avoid the aggregation of Ni and favor the exposure of active sites. The Ni₃S₂ confined by WO₃ prepared from controlled sulfidation of Ni₆PW₉/Nickel Foam (Ni₆PW₉/NF) exhibited excellent catalytic activity in both 0.5 M H₂SO₄ and 1 M KOH solutions, which required only 86 mV and 107 mV overpotentials for HER at a current density of 10 mA∙cm^-2 and 370 mV for OER at 200 mA∙cm^-2. This is attributed to the good dispersion of Ni at the atomic level induced by trivacant PW₉ and the enhanced intrinsic activity by synergistic effect of Ni and W. Therefore, the construction of active phase from the atomic level is insightful to the rational design of dispersed and efficient electrolytic catalysts.

Interfacial built-in electric-field for boosting energy conversion electrocatalysis

The formation of a built-in electric field (BIEF) can induce electron-rich and electron-poor counterparts to synergistically modify electronic configurations and optimize the binding strengths with intermediates, thereby leading to outstanding electrocatalytic performance. Herein, a critical review regarding the concept, modulation strategies, and applications of BIEFs is comprehensively summarized, which begins with the fundamental concepts, together with the advantages of BIEF for boosting electrocatalytic reactions. Then, a systematic summary of the advanced strategies for the modulation of BIEF along with the in-detail mechanisms in its formation are also added. Finally, the applications of BIEF in driving electrocatalytic reactions and some cascade systems for illustrating the conclusive role from the induced BIEF are also systematically discussed, followed by perspectives on the future deployment and opportunity of the BIEF design.

Engineering sensitive gas sensor based on MOF-derived hollow metal-oxide semiconductor heterostructures

Metal-organic frameworks (MOFs) derived hollow heterostructured metal oxide semiconductors (MOSs) are a class of functional porous materials exhibiting distinctive physiochemical properties. Owing to the unique advantages, including large specific surface, high intrinsic catalytic performance, abundant channels for facilitating electron transfer and mass transport, and strong synergistic effect between different components, MOF-derived hollow MOSs heterostructures can work as promising candidates for gas sensing, which have thus attracted increasing attention. Aiming to provide a deep understanding on the design strategy and MOSs heterostructure, this review presents a comprehensive overview on the advantages and applications of MOF-derived hollow MOSs heterostructures when they used n for the detection of toxic gases. In addition, a deep discussion about the perspective and challenge of this interesting field is also well organized, hoping to provide guidance for the future design and development of more accurate gas sensors.

Intensifying Hydrogen Spillover for Boosting Electrocatalytic Hydrogen Evolution Reaction

Hydrogen spillover has attracted increasing interests in the field of electrocatalytic hydrogen evolution reaction (HER) in recent years because of their distinct reaction mechanism and beneficial terms for simultaneously weakening the strong hydrogen adsorption on metal and strengthening the weak hydrogen adsorption on support. By taking advantageous merits of efficient hydrogen transfer, hydrogen spillover-based binary catalysts have been widely investigated, which paves a new way for boosting the development of hydrogen production by water electrolysis. In this paper, we summarize the recent progress of this interesting field by focusing on the advanced strategies for intensifying the hydrogen spillover towards HER. In addition, the challenging issues and some perspective insights in the future development of hydrogen spillover-based electrocatalysts are also systematically discussed.

Strategies for Promoting Catalytic Performance of Ru-based Electrocatalysts towards Oxygen/Hydrogen Evolution Reaction

Ru-based materials hold great promise for substituting Pt as potential electrocatalysts toward water electrolysis. Significant progress is made in the fabrication of advanced Ru-based electrocatalysts, but an in-depth understanding of the engineering methods and induced effects is still in their early stage. Herein, we organize a review that focusing on the engineering strategies toward the substantial improvement in electrocatalytic OER and HER performance of Ru-based catalysts, including geometric structure, interface, phase, electronic structure, size, and multicomponent engineering. Subsequently, the induced enhancement in catalytic performance by these engineering strategies are also elucidated. Furthermore, some representative Ru-based electrocatalysts for the electrocatalytic HER and OER applications are also well presented. Finally, the challenges and prospects are also elaborated for the future synthesis of more effective Ru-based catalysts and boost their future application.

Hollow Heterostructured Nanocatalysts for Boosting Electrocatalytic Water Splitting

The implementation of electrochemical water splitting demands the development and application of electrocatalysts to overcome sluggish reaction kinetics of hydrogen/oxygen evolution reaction (HER/OER). Hollow nanostructures, particularly for hollow heterostructured nanomaterials can provide multiple solutions to accelerate the HER/OER kinetics owing to their advantageous merit. Herein, the recent advances of hollow heterostructured nanocatalysts and their excellent performance for water splitting are systematically summarized. Starting by illustrating the intrinsically advantageous features of hollow heterostructures, achievements in engineering hollow heterostructured electrocatalysts are also highlighted with the focus on structural design, interfacial engineering, composition regulation, and catalytic evaluation. Finally, some perspective insights and future challenges of hollow heterostructured nanocatalysts for electrocatalytic water splitting are also discussed.

Dimension Engineering in Noble-Metal-Based Electrocatalysts for Water Splitting

Dimension engineering plays a critical role in determining the electrocatalytic performance of catalysts towards water electrolysis since it is highly sensitive to the surface and interface properties. Bearing these considerations into mind, intensive efforts have been devoted to the rational dimension design and engineering, and many advanced nanocatalysts with multidimensions have been successfully fabricated. Aiming to provide more guidance for the fabrication of highly efficient noble-metal-based electrocatalysts, this review has focused on the recent progress in dimension engineering of noble-metal-based electrocatalysts towards water splitting, including the advanced engineering strategies, the application of noble-metal-based electrocatalysts with distinctive geometric structure from 0D to 1D, 2D, 3D, and multidimensions. In addition, the perspective insights and challenges of the dimension engineering in the noble-metal-based electrocatalysts is also systematically discussed.

Pd-Based Metallenes for Fuel Cell Reactions

Pd-based metallenes, atomically thin layers composed primarily of under-coordinated Pd atoms, have emerged as the newest members in the family of two-dimensional (2D) nanomaterials. Moreover, the unique physiochemical properties, high intrinsic activity associated with metallenes coupled with the ease of applying chemical modifications result in great potential in catalyst engineering for fuel cell reactions. Especially in recent years, interest in Pd-based metallenes is growing, as evidenced by surge in available literatures. Herein, we have reviewed the recent findings achieved in Pd-based metallenes in fuel cells by highlighting the technologies available for deriving metallenes and manifesting the modification strategies for designing them to better suit the application demand. Moreover, we also discuss the perspective insights of Pd-based metallenes for fuel cells regarding the surfactant-free synthesis method, strain engineering, constructing high-entropy alloy, and so on.

Coupling Transition Metal Compound with Single-Atom Site for Water Splitting Electrocatalysis

Single-atom site catalysts (SACs) provide an ideal platform to identify the active centers, explore the catalytic mechanism, and establish the structure-property relationships, and thus have attracted increasing interests for electrocatalytic energy conversion. Substantial endeavors have been devoted to the construction of carbon-supported SACs, and their progress have been comprehensively reviewed. Compared with carbon-supported SACs, transition metal compounds (TMCs)-supported SACs are still in their infancy in the field of electrocatalysis. However, they have also aroused ever-increasing attention for driving electrocatalytic water splitting, and emerged as an indispensable class of SACs in recent years, predominately owing to their inherently structural features, such as rich anchoring sites, surface defects, and lattice vacancy. Herein, in this review, we have systematically summarized the recent advances of a variety of TMC supported SACs toward electrocatalytic water splitting. The advanced characterization techniques and theoretical analyses for identifying and monitoring the atomic structure of SACs are firstly manifested. Subsequently, the anchoring and stabilization mechanisms for TMC supported SACs are also highlighted. Thereafter, the advances of TMC supported SACs for driving water electrolysis are systematically unraveled.

Plasmon-Mediated Oxidase-like Activity on Ag@ZnS Heterostructured Hollow Nanowires for Rapid Visual Detection of Nitrite

Rational design of fast and sensitive determination of nitrite (NO₂^-) from a complicated actual sample overtakes a crucial role in constructing a high-efficiency sensing platform. Herein, a visual NO₂^- sensing platform with outstanding selectivity, sensitivity, and stability based on a surface plasmon resonance (SPR)-enhanced oxidase-like activity has been proposed. Benefiting from the intrinsic photocatalytic activity and limited light penetration of ZnS, the oxidase-like activity based on ZnS decorated on Ag nanowires (Ag@ZnS) is determined. It is demonstrated that the electrons are generated efficiently on the surface of ZnS and then transferred into the hot electrons of Ag with the help of localized SPR excitation, thus greatly oxidating the colorless 3,3',5,5'-tetramethylbenzidine (TMB) to produce dark blue oxidized TMB (oxTMB). When nitrite is added into the reaction system, the oxTMB will selectively react with NO₂^- to generate diazotized oxTMB, leading to a visual color change from dark blue to light green and subsequently to dark yellow. Owing to the specific recognition between nitrite and oxTMB, the recovery of catalytic activity induced an enhanced colorimetric test with a wider linear range for NO₂^- determination, an ultralow detection limit of 0.1 μM, excellent selectivity, and practicability for application in real samples. This plasmon-enhanced oxidase-like activity not only provides a smart approach to realize a colorimetric assay with high sensitivity and simplicity but also modulates oxidase-like activities.

Introducing Te for boosting electrocatalytic reactions

The deployment of robust catalysts for electrochemical reactions is a critical topic for energy conversion techniques. Te-based nanomaterials have attracted increasing attention for their application in electrochemical reactions due to their positive influence on the electrocatalytic performance induced by their distinctive electronic and physicochemical properties. Herein, we have summarized the recent progress on Te-based nanocatalysts for electrocatalytic reactions by primarily focusing on the positive influence of Te on electrocatalysts. Firstly, Te-based nanomaterials can serve as an ideal template for the construction of well-defined nanostructures. Secondly, Te doping can significantly modify the electronic structure of the host catalyst, thereby, leading to the optimization of binding strength with intermediates. Furthermore, the Te etching strategy can also create a high density of surface defects, thereby leading to substantial improvement in the electrocatalytic performance. Additionally, many representative Te-based nanocatalysts for electrocatalytic reactions are also summarized and systematically discussed. Finally, a conclusive and perspective discussion is also provided to provide guidance for the future development of more efficient electrocatalysts.

Dual-mode biosensing platform for sensitive and portable detection of hydrogen sulfide based on cuprous oxide/gold/copper metal organic framework heterojunction

Hydrogen sulfide (H2S) can not only be regarded as a critical gas signal transduction substance, but also its excess levels can lead to a range of diseases. Currently, the accurate analysis combined with electrochemical (EC) or photothermal (PT) technology for H2S in a complex biological system remains a significant challenge. Herein, an endogenous H2S-triggered heterojunction cuprous oxide/gold/copper metal organic framework (Cu2O/Au/HKUST-1) nanoprobe is designed for dual-mode EC- second near-infrared (NIR-II)/PT analysis in tumor cells with high sensitivity and simplicity. Dual-mode EC quantification - PT is achieved through "off-on" mode of EC and PT signals based on electronic transfer and biosynthesis via an in situ sulfuration reaction. Under the optimum conditions, the EC quantification mode for trace H2S exhibits a wide linear range and an excellent limit of detection of 0.1 μM. More importantly, the dual-mode can display the selective detection of trace H2S in living tumor cells because of the specific interaction between copper ion and H2S. These results provide a new EC-PT promising biosensing platform for noninvasive intelligent detection of H2S in living tumor cells.

Mo doping and Se vacancy engineering for boosting electrocatalytic water oxidation by regulating the electronic structure of self-supported Co9Se8@NiSe

Oxygen evolution reactions (OERs) are regarded as the rate-determining step of electrocatalytic overall water splitting, which endow OER electrocatalysts with the advantages of high activity, low cost, good conductivity, and excellent stability. Herein, a facile H₂O₂-assisted etching method is proposed for the fabrication of Mo-doped ultrathin Co₉Se₈@NiSe/NF-X heterojunctions with rich Se vacancies to boost electrocatalytic water oxidation. After step-by-step electronic structure modulation by Mo doping and Se vacancy engineering, the self-standing Mo-Co₉Se₈@NiSe/NF-60 heterojunctions deliver a current density of 50 mA cm^-2 with an overpotential of 343 mV and a cell voltage of only 1.87 V at 50 mA cm^-2 for overall water splitting in 1.0 M KOH. Our study opens up the possibility of realizing step-by-step electronic structure modulation of nonprecious OER electrocatalysts via heteroatom doping and vacancy engineering.

Heterojunction MnO2-nanosheet-decorated Ag nanowires with enhanced oxidase-like activity for the sensitive dual-mode detection of glutathione

The biocatalytic design of nanomaterials with enzyme-like activity is considered a reliable and promising toolkit for the generation of diagnostic agents in complex biological microenvironments. However, the preparation of nanomaterials while maintaining a high catalytic activity in tumor cells (pH 6.0-6.5) poses a prominent challenge. Herein, we constructed a biomimetic enzyme-trigged dual-mode system with colorimetry at 652 nm and photothermal biosensors to detect glutathione based on hollow MnO₂-nanosheet-decorated Ag nanowires (Ag@MnO₂) as an oxidase-like nanozyme. As expected, Ag@MnO₂ catalyzed the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in the absence of H₂O₂, leading to a blue-colored oxidized TMB (oxTMB) that displayed oxidase-like activity in pH 6.0. Interestingly, the portable dual-mode colorimetry and photothermal method for GSH was developed based on the redox reaction between GSH and oxTMB. This detection method exhibited a wide linear range of 0.1-55 μM for GSH with a low detection limit of 0.08 μM. This work highlights a new insight into nanotechnology by taking advantage of biomimetic design in biological analysis.

Cation-Anion Dual Doping Modifying Electronic Structure of Hollow CoP Nanoboxes for Enhanced Water Oxidation Electrocatalysis

Tuning the electronic state of a nanocatalyst is of vital importance for elevating its catalytic performance toward oxygen evolution reaction (OER). Herein, a cation-anion dual doping strategy has been proposed for modifying the electronic structure of CoP via doping Fe and S atoms. Impressively, Fe doping has been demonstrated to be favorable for improving the carrier density of CoP to produce more hydroxyl radicals (^•OH), while S doping can further modify the electronic structure of CoP to improve the charge-transfer characteristics, thereby synergistically decreasing the energy barrier for the transformation of O* to OOH* and promoting the electrocatalytic OER performance. More importantly, the highly open nanobox structure is also beneficial for the exposure of more accessible catalytically active sites, which can substantially facilitate the electron and mass transport, leading to the superb catalytic OER performance. The successful modulation of OER performance via dual-doping strategy will pose a new strategy for designing more advanced nanocatalysts for energy-related catalysis process.

Biosynthesis-mediated Ni-Fe-Cu LDH-to-sulfides transformation enabling sensitive detection of endogenous hydrogen sulfide with dual-readout signals

Hydrogen sulfide (H₂S) is a vital endogenous gas signal molecule undertaking numerous physiological functions such as biological regulation and cytoprotection. Herein, we developed an electrochemical (EC) and photothermal (PT) dual-readout signals method for H₂S detection based on a novel biosynthesis-mediated Ni-Fe-Cu LDH-to-sulfides transformation strategy. Interestingly, the Cu²⁺-based Ni-Fe LDH (Ni-Fe-Cu LDH) can act as the Cu²⁺ source to react with H₂S, resulting in the in-situ generation of Cu_xS on Ni-Fe-Cu LDH surfaces. Because of the EC signal and intrinsic near-infrared (NIR) PT conversion ability of Cu_xS under 808 nm laser irradiation, the obtained Cu_xS@Ni-Fe-Cu LDH is applied to stimulate EC signal and temperature readout. By this means, a dual-readout signal mode is established for H₂S detection. Under the optimum conditions, this combination of EC and PT methods displays a wide linear range for H₂S to 0.1 μM-90 μM and 50 μM-400 μM, respectively, with a low detection limit of 0.09 μM. In addition, the practicality of Ni-Fe-Cu LDH is verified by determination of endogenous H₂S in living cells. This work not only provides a promising application for H₂S diagnosis but also exhibits the new characteristic of Ni-Fe-Cu LDH nanomaterials as signal transduction tags.

Defect and Interface Engineering of Three-Dimensional Open Nanonetcage Electrocatalysts for Advanced Electrocatalytic Oxygen Evolution Reaction

Defect engineering and interface engineering are two efficient approaches to promote the electrocatalytic performance of transition metal oxides (TMOs) by modulating the local electronic structure and inducing a synergistic effect but usually require costly and complicated processes. Herein, a facile electrochemical etching method is proposed for the controllable tailoring of the defects in a three-dimensional (3D) open nanonetcage CoZnRuO_x heterostructure via the in situ electrochemical etching to remove partial ZnO. The highly open 3D nanostructures, numerous defects, and multicomponent heterointerfaces endow the CoZnRuO_x nanonetcages with more accessible active sites, moderated local electronic structure, and strong synergistic effect, thereby enabling them to not only deliver an ultralow overpotential (244 mV @ 10 mA cm^-2) for oxygen evolution reaction (OER) but also high-performance overall water electrolysis by coupling with commercial Pt/C, with a potential of 1.52 V at 10 mA cm^-2. Moreover, experiments and characterizations also reveal that the remaining Zn²⁺ can facilitate OH^- adsorption and charge transfer, which also further improves the electrocatalytic OER performance. This work proposes a promising strategy for creating surface defects in heterostructured TMOs and provides insights to understand the defect- and interface-induced enhancement of OER electrocatalysis.

Recent advances in hollow nanomaterials with multiple dimensions for electrocatalytic water splitting

Electrocatalytic water splitting has great research prospects in the production of green hydrogen energy, and electrocatalysts are the prerequisite. As widely employed efficient electrocatalysts, hollow nanostructures have attracted a lot of research attention due to their excellent catalytic activity and structural stability. Moreover, the abundant catalytically active sites and tunable morphology also make hollow nanomaterials promising electrocatalysts for water splitting. Despite these advantages, the industrial applications of these hollow nanocatalysts are impeded by limitations like the lack of effective synthesis methods and unclear formation mechanisms. Therefore, extensive efforts have been devoted to the development of efficient synthesis strategies to boost the development of more efficient hollow electrocatalysts, and great progress has been achieved in recent years. To gain a better understanding of the rapid development of hollow nanocatalysts for water splitting, we herein organize a review to summarize the recent synthetic methods and advantages of hollow materials with different dimensions. The specific advantages of hollow nanomaterials in electrocatalytic water splitting, such as abundant active sites, a stable structure, high mass transfer efficiency, and reduced aggregation of catalytic particles, are also summarized. Finally, the challenges and prospects of hollow nanostructures with multiple dimensions in electrocatalytic water splitting are further explored.

Hierarchical Hollow CoWO4-Co(OH)2 Heterostructured Nanoboxes Enabling Efficient Water Oxidation Electrocatalysis

Rational design and construction of well-defined hollow heterostructured nanomaterials assembled by ultrathin nanosheets overtakes crucial role in developing high-efficiency oxygen evolution reaction (OER) electrocatalysts. Herein, a reliable metal-organic framework-mediated and cation-exchange strategy to tune the geometric structure and multicomponent heterostructures has been proposed for the fabrication of hollow CoWO₄-Co(OH)₂ hierarchical nanoboxes assembled by rich ultrathin nanosheets. Benefiting from the hierarchical hollow nanostructure, the CoWO₄-Co(OH)₂ nanoboxes offer plenty of metal active centers available for reaction intermediates. Moreover, the well-defined nanointerfaces between CoWO₄ and Co(OH)₂ can function as the bridge for boosting the efficient electron transfer from CoWO₄ to Co(OH)₂. As a consequence, the optimized CoWO₄-Co(OH)₂ nanoboxes can exhibit outstanding electrocatalytic performance toward OER by delivering 10 mA cm^-2 with a low overpotential of 280 mV and a small Tafel slope of 70.6 mV dec^-1 as well as outstanding electrochemical stability. More importantly, this CoWO₄-Co(OH)₂ heterostructured nanocatalyst can couple with Pt/C to drive overall water splitting to achieve 10 mA cm^-2 with a voltage of 1.57 V.

Electronic and architecture engineering of hammer-shaped Ir–NiMoO4-ZIF for effective oxygen evolution

Electronic and architecture engineering is realized via doping an ultralow amount of Ir into NiMoO4-ZIF hammers to achieve outstanding electrocatalytic OER performance.

Electrospun one-dimensional electrocatalysts for boosting electrocatalysis

Electrocatalytic reaction plays a crucial role in determining the energy conversion efficiency in advanced technology. However, it is limited by the sluggish reaction kinetics and high energy barrier. These shortcomings...