Regulating conduction and polarization losses by adjusting bonded N in N-doped Cu/CuO/C composites

Comparative study of peroxymonosulfate activation with H2O2 activation by Cu-N doped biochar derived from peach gum network for rapid antibiotic removal

The design and development of efficient biochar catalysts is an urgent need for the removal of toxic contaminants from water bodies. Peach gum (PG) is a natural colloid featuring a heteropolysaccharide macromolecule structure. Herein, Cu2+ was anchored to the macromolecule of peach gum with dicyandiamide serving as the auxiliary ligand. Then, copper-nitrogen codoped peach gum biochar (Cu-N-PGC) was successfully prepared by the pyrolysis of the Cu2+/dicyandiamide modified peach gum precursor. Structural characterization demonstrated that CuO nanoparticles, pyridinic-N, and pyrrolic-N structures have been successfully constructed and uniformly doped into the graphitic structure of peach gum biochar. The mesoporous structure was fabricated in Cu-N-PGC composites by using NH4HCO3 as pore-making agent, and the adsorption of tetracycline (TC) on Cu-N-PGC-350 could be described by Langmuir isotherm model and pseudo-second-order kinetic model. The Cu-N-PGC biochar exhibited outstanding activation performance for peroxymonosulfate (PMS) and hydrogen peroxide (H2O2) in the removal of TC. Cu-N-PGC-350 showed the highest catalytic activity by activating PMS in the darkness, achieving a removal efficiency of 99.8 % for TC within 15 min. The rate constant obtained by PMS activation (0.38 min-1) was 4.47 times higher than that by H2O2 activation (0.085 min-1), suggesting Cu-N-PGC-350/PMS system was more efficient than the Cu-N-PGC-350/H2O2 system. The catalytic mechanism was studied through trapping experiments, EPR tests, and molecular electrostatic potential calculation, which reveals that 1O2 and SO4·- are the primary reactive species in the Cu-N-PGC-350/PMS system, while •OH is the main reactive radical generated in the Cu-N-PGC-350/H2O2 system. The degradation pathways of TC were proposed through the analysis of liquid chromatography-mass spectrometry (LC-MS), and the ecotoxicology of TC before and after degradation was evaluated by the TEST toxicity assessment and the rice seeds germination tests. This work presents an effective approach for the preparation of functional biochar with tree gum, thereby technically addressing the issue of uneven doping of metal-N active sites in biochar.

Multidimensional Nanostructures Design of Poly-Imidazolium Salts Derived N-Doped Carbon Materials for Electromagnetic Microwave Absorption

Poly-imidazolium salt (PIS) combines the merits of abundant nitrogen sources, excellent chemical and thermal stability and adjustable morphology, making it a promising precursor for Nitrogen-doped (N-doped) carbon material. Herein, multidimensional PIS are synthesized via a facile solvent-induced strategy. Then, PIS are converted into nanofibers, nanoribbons and microspheres composed of N-doped carbon. The effects of microstructure, N-doping degree and defects on microwave absorption properties are investigated in depth. As a result, the 2D nanoribbon CN-2-700 features a high specific surface area, significant N-doping and moderate conductivity, thereby allowing it to sustain perfect conductive networks and the optimal impedance matching at a low filler content (8 wt.%). CN-2-700 demonstrates a minimum reflection loss (RLmin) of -50.15 dB and an effective absorption bandwidth (EAB) of 7.06 GHz (10.44-17.50 GHz). Overall, this work offers a novel path for developing multi-dimensional electromagnetic microwave absorbing materials with a simple process and remarkable performance.

Roles of BOCu sites and graphite nitrogen on persulfate non-radical activation for tetracycline degradation

The activation of peroxymonosulfate (PMS) by carbon-based catalysts is deemed to be a promising method for the degradation of refractory organic contaminants in wastewater. Herein, a Cu-doping strategy in B and N co-doped carbon nanotubes with highly dispersed BOCu sites and graphite nitrogen were successfully synthesized for activating PMS to degradate tetracycline. The best removal rate of tetracycline within 60 min (97.63 %) was obtained by the 1.5 % Cu-BNC and the degradation rate was increased by 17.9 times. The enhanced catalyst activity was attributed to the promoting the cycle of the Cu(I)/Cu(II) redox pair by the formed BOCu sites, and the accelerating the electron transfer process by the adsorption of graphitic N for PMS. The non-free radical pathway including 1O2 and electron transfer played a dominant role in the 1.5 % Cu-BNC/PMS system. The degradation intermediates of TC were identified and three possible degradation pathways were proposed. Further toxicity analysis of the intermediates showed that the 1.5 % Cu-BNC/PMS system had a significant effect on weakening and reducing the biological toxicity and mutagenicity of TC. Moreover, it presented an excellent degradation performance in raw natural water. In general, the proposed regulation of carbon-based catalysts via the coordination-driven effect provides ideas for efficient wastewater treatment.

Architectural Design of a Multichannel Porous Carbon Fiber for Efficient Electromagnetic Microwave Absorption

An ingenious microstructure of electromagnetic microwave absorption materials is crucial to achieve strong absorption and a broad bandwidth. Herein, one-dimensional (1D) carbon fibers with implantation of zero-dimensional (0D) ZIF-8-derived carbon frameworks and construction of a three-dimensional (3D) microcosmic multichannel porous structure are fabricated by electro-blown spinning, solvent-thermal reaction, and high-temperature pyrolysis techniques. The 1D carbon fiber skeleton with a multichannel structure provides a direct axial conductive pathway for charge transport, which plays an important role in dielectric loss. The 0D surface carbon frameworks offer plenty of heterogeneous interfaces to trigger intensive interfacial polarization loss and act as dihedral angles for microwave scattering. The 3D microcosmic multichannel pores can not only generate multiple reflections as much as possible to dissipate electromagnetic microwave energy but also supply huge interior cavities to improve impedance matching. Thanks to the synergistic effect of a strong electrically conductive pathway for enhancing the conductive loss, a plenteous heterogeneous interface for triggering intensive interfacial polarization loss, microcosmic multichannel pores for generating multiple reflections and improving impedance matching, and N and O atom doping for inducing dipole polarization, the optimal sample with an ingenious microstructure delivers an excellent absorption performance of a minimum reflection loss of -35.5 dB at a thickness of 5.0 mm and an effective absorption bandwidth of 6.72 GHz (10.96-17.68 GHz) at a thickness of 2.0 mm. Such a well-designed multichannel porous carbon fiber may pave the way for the exploitation of high-performance microwave absorbing materials.

Two-phase magnetic nanospheres with magnetic coupling effect encapsulated in porous carbon to achieve lightweight and efficient microwave absorbers

Component selection is crucial for microwave absorbents. Multi-component absorbers are increasingly useful and can be prepared through the rational design and control of various electrical, magnetic, and other auxiliary components. In this paper, Ni3Fe/NiFe2O4 nanospheres with two-phase magnetism were designed for use as a multi-component absorber. Specifically, a Ni3Fe/ NiFe2O4@SPC composite with 3D networks was successfully fabricated by hydrothermal method, high-temperature carbonization for activation, and electrostatic self-assembly. The contact interface and coupling effect between the two magnetic components can promote the attenuation of electromagnetic waves. Moreover, the introduction of porous carbon successfully inhibits the easy aggregation of the magnetic particles. Impressively, with a filling load of 10 wt%, the optimal RL of the prepared Ni3Fe/NiFe2O4@SPC composite reaches -60.6 dB, and the effective absorption bandwidth is 5.2 GHz at 2 mm. The combination of two magnetic components and porous carbon in this multiphase microwave-absorbing composite demonstrates a feasible strategy for designing efficient microwave absorbers in the future.

In Situ Fabrication of Heterogeneous Co/Nanoporous Carbon Nano-Islands for Excellent Electromagnetic Wave Absorption

High-performance electromagnetic wave (EMW) absorbers are essential for addressing electromagnetic pollution and military security. However, challenges remain in realizing cost-effectiveness and modulating absorbing properties. In this study, heterogeneous Co/nanoporous carbon (NPC) nano-islands are prepared by efficient method co-precipitation combined with in situ pyrolysis. The multi-regulation strategy of morphology, graphitization, and defect density is achieved by modulating the pyrolysis temperature. Adjusting the pyrolysis temperature can effectively balance the conductivity and defect density, optimizing the impedance matching and enhancing the attenuation. Furthermore, it facilitates obtaining the appropriate shape and size of Co magnetic nanoparticles (Co-MNPs), triggering strong surface plasmon resonance. This resonance, in turn, bolsters the synergy of dielectric and magnetic loss. The incorporation of porous nanostructures not only optimizes impedance matching and enhances multiple reflections but also improves interfacial polarization. Additionally, the presence of enriched defects and heteroatom doping significantly enhances dipole polarization. Notably, the absorber exhibits an impressive minimum reflection loss (RLmin) of -73.87 dB and a maximum effective absorption bandwidth (EABmax) of 6.64 GHz. The combination of efficient fabrication methods, a performance regulation strategy through pyrolysis temperature modulation, and radar cross section (RCS) simulation provides a high-performance EMW absorber and can pave the way for large-scale applications.

Joule-Heating-Driven Synthesis of a Honeycomb-Like Porous Carbon Nanofiber/High Entropy Alloy Composite as an Ultralightweight Electromagnetic Wave Absorber

High entropy alloys (HEA) have garnered significant attention in electromagnetic wave (EMW) absorption due to their efficient synergism among multiple components and tunable electronic structures. However, their high density and limited chemical stability hinder their progress as lightweight absorbers. Incorporating HEA with carbon offers a promising solution, but synthesizing stable HEA/carbon composite faces challenges due to the propensity for phase separation during conventional heat treatments. Moreover, EMW absorption mechanisms in HEAs may be different from established empirical models due to their high-entropy effect. This underscores the urgent need to synthesize stable and lightweight HEA/carbon absorbers and uncover their intrinsic absorption mechanisms. Herein, we successfully integrated a quinary FeCoNiCuMn HEA into a honeycomb-like porous carbon nanofiber (HCNF) using electrostatic spinning and the Joule-heating method. Leveraging the inherent lattice distortion effects and honeycomb structure, the HCNF/HEA composite demonstrates outstanding EMW absorption properties at an ultralow filler loading of 2 wt %. It achieves a minimum reflection loss of -65.8 dB and boasts a maximum absorption bandwidth of up to 7.68 GHz. This study not only showcases the effectiveness of combining HCNF with HEA, but also underscores the potential of Joule-heating synthesis for developing lightweight HEA-based absorbers.

Fabrication of cobalt-zinc bimetallic oxides@polypyrrole composites for high-performance electromagnetic wave absorption

Composite materials that combine magnetic and dielectric losses offer a potential solution to enhance impedance match and significantly improve microwave absorption. In this study, Co3O4/ZnCo2O4 and ZnCo2O4/ZnO with varying metal oxide compositions are successfully synthesized, which are achieved by modifying the ratios of Co2+ and Zn2+ ions in the CoZn bimetallic metal-organic framework (MOF) precursor, followed by a high-temperature oxidative calcination process. Subsequently, a layer of polypyrrole (PPy) is coated onto the composite surfaces, resulting in the formation of core-shell structures known as Co3O4/ZnCo2O4@PPy (CZCP) and ZnCo2O4/ZnO@PPy (ZCZP) composites. The proposed method allows for rapid adjustments to the metal oxide composition within the inner shell, enabling the creation of composites with varying degrees of magnetic losses. The inclusion of PPy in the outer shell serves to enhance the bonding strength of the entire composite structure while contributing to conductive and dielectric losses. In specific experimental conditions, when the loading is set at 50 wt%, the CZCP composite exhibits an effective absorption bandwidth (EAB) of 5.58 GHz (12.42 GHz-18 GHz) at a thickness of 1.53 mm. Meanwhile, the ZCZP composite demonstrates an impressive minimum reflection loss (RLmin) of -71.2 dB at 13.04 GHz, with a thickness of 1.84 mm. This study offers a synthesis strategy for designing absorbent composites that possess light weight and excellent absorptive properties, thereby contributing to the advancement of electromagnetic wave absorbing materials.

Microstructure optimization strategy of ZnIn2S4/rGO composites toward enhanced and tunable electromagnetic wave absorption properties

Although microstructure optimization is an effective strategy to improve and regulate electromagnetic wave (EMW) absorption properties, preparing microwave absorbents with enhanced EMW absorbing performance and tuned absorption band by a simple method remains challenging. Herein, ZnIn2S4/reduced graphene oxide (rGO) composites with flower-like and cloud-like morphologies were fabricated by a convenient hydrothermal method. The ZnIn2S4/rGO composites with different morphologies realize efficient EMW absorption and tunable absorption bands, covering a wide frequency range. The flower-like structure has an optimal reflection loss (RL) of up to -49.2 dB with a maximum effective absorption bandwidth (EAB) of 5.7 GHz, and its main absorption peaks are concentrated in the C and Ku bands. The minimal RL of the cloud-like structure can reach -36.3 dB, and the absorption peak shifts to the junction of X and Ku bands. The distinguished EMW absorption capacity originates from the uniquely optimized microstructure, complementary effect of ZnIn2S4 and rGO in dielectric constant, and synergy of various loss mechanisms, such as interfacial polarization, dipole polarization, conductive loss, and multiple reflections. This study proposes a guide for the structural optimization of an ideal EMW absorber to achieve efficient and tunable EMW absorption performance.