In situ selective selenization of ZIF-derived CoSe2 nanoparticles on NiMn-layered double hydroxide@CuBr2 heterostructures for high performance supercapacitors

Zeolitic imidazolate framework-67-derived chalcogenides as electrode materials for supercapacitors

With the rapid development of new energy technologies, hybrid supercapacitors have received widespread attention owing to their advantages of high power density, fast charging/discharging rate and long cycle life. In this case, the selection and design of electrode materials are the key to improving the energy storage performance of supercapacitors. Herein, zeolitic imidazolate framework-67 (ZIF-67) is presented as a good candidate material for the fabrication of supercapacitor electrodes because of its controllable pore size, constant cavity size and large specific area. Moreover, pristine ZIF-67 and ZIF-67-derived porous carbon have shown exemplary performances in supercapacitors. However, they belong to the class of electric double layer capacitor materials and have a lower magnitude of energy storage compared with pseudocapacitor materials. Therefore, to improve the energy density of hybrid supercapacitors, other ZIF-67 derivatives need to be explored, especially chalcogenides. This review mainly reports the application of ZIF-67-derived transition metal chalcogenides (TMCs, C including Oxide, Sulfide, Selenide, Telluride) in supercapacitors. Moreover, the strategies for the preparation of ZIF-67-derived TMCs and their electrochemical performance in supercapacitors are further discussed. Finally, the remaining challenges and future perspectives are highlighted.

Engineering intervention to disrupt the evolution of ZIF-67: Ultra-fast synthesis of arrayed Co(OH)2@ZIF-L in dozens of seconds for high-energy charge storage

Designing rational heterostructures of high-performance electroactive materials on conductive substrates with hierarchical structures is critical for advancing electrochemical energy storage technologies. In this study, a unique spatial structure is fabricated by vertically aligning two-dimensional (2D) structures of Co-ZIF-L on conductive nickel foam (NF) substrate through interruption of ZIF-67 formation. This is followed by an innovative electrochemical synthesis method that disrupts unstable surface coordination bonds in Co-ZIF-L, enabling the in-situ generation of Co(OH)2. The resulting Co(OH)2@ZIF-L/NF binder-free electrodes feature a hierarchical spatial structure and are synthesized in approximately 30 s. These electrodes showcase exceptional area capacity of 3.1 C cm-2 at 1 mA cm-2, attributed to their high specific surface area and layered architecture that promotes electrolyte penetration. Density Functional Theory (DFT) calculations reveal that the Co(OH)2@ZIF-L nanostructures have superior electrical conductivity compared to the individual components. Furthermore, a hybrid supercapacitor (HSC) based on Co(OH)2@ZIF-L/NF//AC exhibits an impressive energy density of 42 Wh kg-1 at a power density of 184.7 W kg-1. This research provides new insights into the efficient synthesis of high-performance electroactive materials with unique spatial structures and expands the potential applications of ZIF materials.

Hierarchical Nb@NbN core-shell-like nanocolumns for asymmetric supercapacitors

Transition metal nitrides (TMNs) are promising electrode materials for supercapacitors because of their high electrical conductivity and chemical stability. The rational design and facile synthesis of TMNs electrode materials with a unique nanostructure are the key to develop high-performance supercapacitors. Herein, we propose a two-step, binder-free, and eco-friendly approach utilizing magnetron sputtering at an oblique angle deposition configuration to fabricate hierarchical Nb@NbN core-shell-like nanocolumns for supercapacitors. This distinctive heterostructure not only creates lattice defects, increases active surface area, facilitates ion diffusion and charge transfer, but also optimizes the electronic structure and enhances the conductivity. As a result, the hierarchical Nb@NbN core-shell-like nanocolumn electrodes exhibit a high areal capacitance of 53.3 mF cm-2 at 1 mA cm-2 and an excellent capacitance retention of 93.5 % after 20,000 cycles, outperforming pristine NbN and the majority of previously reported TMNs electrodes. Moreover, the assembled Nb@NbN nanocolumns//VN thin films asymmetric supercapacitor device can deliver a maximum energy density of 49.8 mWh cm-3 and power density of 82 W cm-3. This work presents a facile and environmentally friendly strategy for the synthesis of TMNs core-shell-like nanocolumns, and further demonstrates their promising potential for use in supercapacitors.

Guiding nitrogen doped vanadium pentoxide nanoclusters on cobalt sulfide nano-flakiness as stable seamless interface anode toward highly energy density and durable asymmetric supercapacitors

Interaction of the interface-heterostructures is crucial to rapid ionic conductivity and highly energy density of electrode materials toward supercapacitors. Herein, a novel anode heterostructure is synthesized using cobalt sulfide (CoS) nanoflowers as a substrate for composite nitrogen doped vanadium pentoxide (denoted as N-V2O5@CoS) by combination of hydrothermal and calcination method. As expected, the N-V2O5@CoS electrode possesses superhigh specific surface area that significantly enhances the specific capacitance, and its unique porous interconnected structure not only reduces the volume effect during the cycles, but also greatly enhances the conductivity of electron transfer. The as-prepared N-V2O5@CoS electrode has a specific capacitance of up to 2413.6F/g at a current density of 1 A/g, and can still maintain 87.51 % of the initial capacitance after 5,000 cycles at a high current density of 10 A/g. More importantly, the partial density of states (PDOS) ares obtained through theoretical calculations reveal that the interaction of heterogeneous interfaces is contributed by the p-orbitals of C, O and S and d-orbitals of V and Co. In addition, asymmetric supercapacitor (ASC) with N-V2O5@CoS as the positive electrode and activated carbon (AC) as the negative electrode has a high voltage of 1.7 V, which achieves an outstanding energy density of 71.6 W h kg-1 at a power density of 849.8 W kg-1, showing excellent cycle stability (retain 90.6 % of the initial capacitance after 10,000 charge/discharge cycles). This paper offers novel paradigm for the doping of metal oxides and the development of heterostructures, which provides support for their use as advanced energy storage materials.

Tip effect of NiCo-LDH with low crystallinity for enhanced energy storage performance of yarn-shaped supercapacitors

Layered double hydroxides (LDHs) are considered promising materials for supercapacitor applications. However, the development of yarn-shaped supercapacitors (YSCs) with high electrochemical performance utilizing LDHs remains challenging. In this study, the NiCo-LDHs with various morphologies (nano-needles, nano-sheets, needle-sheet composites, and nano-flowers) were grown on carbon nanotubes (CNTs)-functionalized cotton yarn via a co-precipitation technique for YSC applications. Among these, the yarn incorporating nano-needle NiCo-LDHs exhibited reduced crystallinity yet demonstrated a superior areal capacitance compared to other morphologies, following a diffusion-controlled process. Finite element simulations were subsequently conducted to investigate this phenomenon, revealing that the lower-crystallinity nano-needle NiCo-LDHs accumulated a greater charge at their tips, thereby enhancing redox reactions and achieving higher energy storage capacitance. Subsequently, the yarns with nano-needle NiCo-LDHs were assembled into flexible quasi-solid-state symmetric YSCs, achieving a peak areal capacitance of 124.27 mF cm-2 and an exceptionally high energy density of 39.4 μWh cm-2 at a current density of 0.2 mA cm-2. Furthermore, our YSCs can be scaled up through serial or parallel connections and integrated into fabrics, making them suitable for wearable energy storage applications. This work provides an efficient method for fabricating high-performance YSCs and demonstrates significant potential for wearable energy storage devices.

Nickel-Cobalt Layered Double Hydroxide Nanosheet-Decorated 3D Interconnected Porous Ni/SiC Skeleton for Supercapacitor

In this study, a three-dimensional (3D) interconnected porous Ni/SiC skeleton (3D Ni/SiC) was synthesized by binder-free hydrogen bubble template-assisted electrodeposition in an electrolyte containing Ni2+ ions and SiC nanopowders. This 3D Ni/SiC skeleton served as a substrate for directly synthesizing nickel-cobalt layered double hydroxide (LDH) nanosheets via electrodeposition, allowing the formation of a nickel-cobalt LDH nanosheet-decorated 3D Ni/SiC skeleton (NiCo@3D Ni/SiC). The multiscale hierarchical structure of NiCo@3D Ni/SiC was attributed to the synergistic interaction between the pseudocapacitor (3D Ni skeleton and Ni-Co LDH) and electrochemical double-layer capacitor (SiC nanopowders). It provided a large specific surface area to expose numerous active Ni and Co sites for Faradaic redox reactions, resulting in an enhanced pseudocapacitance. The as-fabricated NiCo@3D Ni/SiC structure demonstrated excellent rate capability with a high areal capacitance of 1565 mF cm-2 at a current density of 1 mA cm-2. Additionally, symmetrical supercapacitor devices based on this structure successfully powered commercial light-emitting diodes, indicating the potential of as-fabricated NiCo@3D Ni/SiC in practical energy storage applications.

Self-supported porous wood carbon electrode with a MoC/carbon nanocage composite for application in a high-performance supercapacitor

The rational design and synthesis of carbon nanocages with highly complex porous structures are continuously facing challenges in the development of high-performance supercapacitors (SCs). The electrochemical performance characteristics of electrodes rely on their compositions and fabrication methods. Here, we propose a universal and efficient approach for the in-situ synthesis of zeolitic imidazolate framework-8 (ZIF-8) on porous carbonized wood, where the selective utilization of hexacarbonyl molybdenum protects the structural integrity of the ZIF-8 precursor, preventing collapse during thermal treatment. The subsequent pyrolysis process leads to the formation of small-sized molybdenum carbide (MoC) which are embedded in carbon nanocages (CN). The composite electrode consists of MoC/CN embedded in a porous carbonized wood (PCW), and it shows area-specific capacity of 9.7F cm-2 and 9.4 F cm-2 at 5 mA cm-2 and 30 mA cm-2, respectively. Subsequently, the symmetric supercapacitor, with two MoC/CN@PCW electrodes exhibits a areal specific capacitance of 2.7 F cm-2 at 5 mA cm-2. Moreover, this supercapacitor maintains an capacitance retention rate of 98.5 % after 12,000 discharge cycles. The supercapacitor exhibits a power density of 6.5 mW cm-2, resulting in an energy density of 0.864 mWh cm-2. Therefore, the utilization of wood-based electrodes holds promise for energy storage systems.

High performance supercapacitors deploying cube-templated tracheid cavities of wood-derived carbon

Wood-derived carbon, with its strong tracheid array structure, is an ideal material for use as a self-supporting electrode in supercapacitors. By leveraging the inherent through pore structure and surface affinity found in wood tracheids, we successfully engineered a highly spatially efficient cube-templated porous carbon framework inside carbonized wood tracheid cavities through precise control over precursor crystallization temperatures. This innovative cubic channel architecture effectively maximizes up to (79 ± 1)% of the cavity volume in wood-derived carbon while demonstrating exceptional hydrophilicity and high conductivity properties, facilitating the development of supercapacitors with enhanced areal/volumetric capacitances (2.65F cm-2/53.0F cm-3 at 5.0 mA cm-2) as well as superior areal/volumetric energy densities (0.37 mWh cm-2/7.36 mWh cm-3 at 2.5 mW cm-2). The fabrication of these cube-templated channels with high cube filling content is not only simple and precisely controllable, but also environmentally friendly. The proposed method eliminates the conventional acid-base treatment process for pore formation, facilitating the rapid development and practical implementation of thick electrodes with superior performance in supercapacitors. Moreover, it offers a universal research approach for the commercialization of wood-derived thick electrodes.

Sub-nanopores enabling optimized ion storage performance of carbon cathodes for Zn-ion hybrid supercapacitors

Aqueous Zn-ion hybrid supercapacitors (ZHSs) are attracting significant attention as a promising electrochemical energy storage system. However, carbon cathodes of ZHSs exhibit unsatisfactory ion storage performance due to the large size of hydrated Zn-ions (e.g., [Zn(H2O)6]2+), which encumbers compact ion arrangement and rapid ion transport at the carbon-electrolyte interfaces. Herein, a porous carbon material (HMFC) with abundant sub-nanopores is synthesized to optimize the ion storage performance of the carbon cathode in ZHSs, in which the sub-nanopores effectively promote the dehydration of hydrated Zn-ions and thus optimize the ion storage performance of the carbon cathode in ZHSs. A novel strategy is proposed to study the dehydration behaviors of hydrated Zn-ions in carbon cathodes, including quantitatively determining the desolvation activation energy of hydrated Zn-ions and in-situ monitoring active water content at the carbon-electrolyte interface. The sub-nanopores-induced desolvation effect is verified, and its coupling with large specific surface area and hierarchically porous structure endows the HMFC cathode with improved electrochemical performance, including a 53 % capacity increase compared to the carbon cathode counterpart without sub-nanopores, fast charge/discharge ability that can output 46.0 Wh/kg energy within only 4.4 s, and 98.2 % capacity retention over 20,000 charge/discharge cycles. This work provides new insights into the rational design of porous carbon cathode materials toward high-performance ZHSs.

Bimetallic Photo-Activated and Steerable Janus Micromotors as Active Microcleaners for Wastewater

Photoactive colloidal motors whose motion can be controlled and even programed via external magnetic fields have significant potential in practical applications extending from biomedical fields to environmental remediation. Herein, we report a "three in one" strategy in a Co/Zn-TPM (3-trimethoxysilyl propyl methacrylate) bimetallic Janus colloidal micromotor (BMT-micromotor) which can be controlled by an optical field, chemical fuel, and magnetic field. The speed of the micromotors can be tuned by light intensity and with the concentration of the chemical fuel of H2O2, while it could be steered and programed through magnetic field due to the presence of Co in the bimetallic part. Finally, the BMT-micromotors were employed to effectively remove rubidium metal ions and organic dyes (methylene blue and rhodamine b). Benefited of excellent mobility, multiple active sites, and hierarchical morphology, the micromotors exhibit excellent adsorption capacity of 103 mg·g-1 to Rb metal ions and high photodegradation efficiency toward organic dyes in the presence of a lower concentration of H2O2. The experimental characterizations and DFT calculations confirmed the strong interaction of Rb metal ions on the surface of BMT-micromotors and the excellent decomposition of H2O2 which enhanced the photodegradation process. We expect the combination of light and fuel sensitivity with magnetic controllability to unlock an excess of opportunities for the application of BMT-micromotors in water treatments.

Composite of CoS1.97 nanoparticles decorated CuS hollow cubes with rGO as thin film electrode for high-performance all solid flexible supercapacitors

Stretchable flexible thin-film electrodes are extensively explored for developing new wearable energy storage devices. However, traditional carbon-based materials used in such independent electrodes have limited practical applications owing to their low energy storage capacity and energy density. To address this, a unique structure and remarkable mechanical stability thin-film flexible positive electrode comprising CoS1.97 nanoparticles decorated hollow CuS cubes and reduced graphene oxide (rGO), hereinafter referred to as CCSrGO, is prepared. Transition metal sulfide CoS1.97 and CuS shows high energy density owing to the synergistic effects of its active components. The electrode can simultaneously meet the high-energy density and safety requirements of new wearable energy storage devices. The electrode has excellent electrochemical performance (1380 F/g at 1 A/g) and ideal capacitance retention (93.8 % after 10,000 cycles) owing to its unique three-dimensional hollow structure and polymetallic synergies between copper and cobalt elements, which are attributed to their different energy storage mechanisms. Furthermore, a flexible asymmetric supercapacitor (FASC) was constructed using CCSrGO as the positive electrode and rGO as the negative electrode (CCSrGO//rGO), which delivers an energy density of 100 Wh kg-1 and a corresponding power density of 2663 W kg-1 within a voltage window of 0-1.5 V. The resulting FASC can power a light-emitting diode (LED) at different bending and twisting angles, exerting little effect on the capacitance. Therefore, the prepared CCSrGO//rGO FASC devices show great application prospects in energy storage.

Construction of rod-like cobalt-pyridinedicarboxylic acid/MXene nanosheets composites for hydrogen evolution reaction and supercapacitor

Metal-organic frameworks (MOFs) have attracted considerable attention in the field of energy storage and conversion due to their large specific surface area, regulatable pore structure and composition. However, the poor electrical conductivity and few active sites of MOFs impede their application. Herein, highly conductive MXene nanosheets are introduced to modulate the electronic conductivity and structure of rod-like Co-pyridinedicarboxylic acid (Co-PDC), and thus enhancing the electrochemical performance of MOFs. The heterostructural Co-PDC/MXene (CPM) was facily synthesized at room temperature. The as-prepared CPM-30 with 30 % MXene only requires the overpotential of 75.1 mV to achieve a current density of 10 mA cm-2 for hydrogen evolution reaction (HER), and the assembled electrolytic cell with CPM-30 and RuO2 as cathode and anode electrodes can achieve a current density of 10 mA cm-2 at a voltage of 1.65 V. In addition, CPM-10 exhibits a high specific capacitance of 583.1 F g-1 at 0.5 A g-1 and an excellent rate performance of 41.6 % at 50 A g-1. Furthermore, the assembled asymmetric supercapacitor CPM-10//AC exhibited an energy density of 15.55 Wh kg-1 at a power density of 750 W kg-1 and excellent stability with a capacitance retention rate of 95 % after 10,000 cycles. The excellent electrochemical properties of Co-PDC/MXene are attributed to the unique structure and synergistic effect of Co-PDC and MXene.

All-Covalent Organic Framework Nanofilms Assembled Lithium-Ion Capacitor to Solve the Imbalanced Charge Storage Kinetics

Free-standing covalent organic framework (COFs) nanofilms exhibit a remarkable ability to rapidly intercalate/de-intercalate Li+ in lithium-ion batteries, while simultaneously exposing affluent active sites in supercapacitors. The development of these nanofilms offers a promising solution to address the persistent challenge of imbalanced charge storage kinetics between battery-type anode and capacitor-type cathode in lithium-ion capacitors (LICs). Herein, for the first time, custom-made COFBTMB-TP and COFTAPB-BPY nanofilms are synthesized as the anode and cathode, respectively, for an all-COF nanofilm-structured LIC. The COFBTMB-TP nanofilm with strong electronegative-CF3 groups enables tuning the partial electron cloud density for Li+ migration to ensure the rapid anode kinetic process. The thickness-regulated cathodic COFTAPB-BPY nanofilm can fit the anodic COF nanofilm in the capacity. Due to the aligned 1D channel, 2D aromatic skeleton and accessible active sites of COF nanofilms, the whole COFTAPB-BPY//COFBTMB-TP LIC demonstrates a high energy density of 318 mWh cm-3 at a high-power density of 6 W cm-3, excellent rate capability, good cycle stability with the capacity retention rate of 77% after 5000-cycle. The COFTAPB-BPY//COFBTMB-TP LIC represents a new benchmark for currently reported film-type LICs and even film-type supercapacitors. After being comprehensively explored via ex situ XPS, 7Li solid-state NMR analyses, and DFT calculation, it is found that the COFBTMB-TP nanofilm facilitates the reversible conversion of semi-ionic to ionic C-F bonds during lithium storage. COFBTMB-TP exhibits a strong interaction with Li+ due to the C-F, C=O, and C-N bonds, facilitating Li+ desolation and absorption from the electrolyte. This work addresses the challenge of imbalanced charge storage kinetics and capacity between the anode and cathode and also pave the way for future miniaturized and wearable LIC devices.