Immunohistochemical study of vascular endothelial growth factor (VEGF) and bone morphogenetic protein-2, -4 (BMP-2, -4) on lengthened rat femurs

Reducing Healing Period with DDM/rhBMP-2 Grafting for Early Loading in Dental Implant Surgery

BACKGROUND

Traditionally, dental implants require a healing period of 4 to 9 months for osseointegration, with longer recovery times considered when bone grafting is needed. This retrospective study evaluates the clinical efficacy of demineralized dentin matrix (DDM) combined with recombinant human bone morphogenetic protein-2 (rhBMP-2) during dental implant placement to expedite the osseointegration period for early loading.

METHODS

Thirty patients (17 male, 13 female; mean age 55.0 ± 8.8 years) requiring bone grafts due to implant fixture exposure (more than four threads; ≥ 3.2 mm) were included, with a total of 96 implants placed. Implants were inserted using a two-stage protocol with DDM/rhBMP-2 grafts. Early loading was initiated at two months postoperatively in the mandible and three months in the maxilla. Clinical outcomes evaluated included primary and secondary stability (implant stability quotient values), healing period, bone width, and marginal bone level assessed via cone-beam computed tomography.

RESULTS

All implants successfully supported final prosthetics with a torque of 50Ncm, without any osseointegration failures. The average healing period was 69.6 days in the mandible and 90.5 days in the maxilla, with significantly higher secondary stability in the mandible (80.7 ± 6.7) compared to the maxilla (73.0 ± 9.2, p < 0.001). Histological analysis confirmed new bone formation and vascularization.

CONCLUSION

DDM/rhBMP-2 grafting appears to significantly reduce the healing period, enabling early loading with stable and favorable clinical outcomes.

The accordion technique enhances bone regeneration via angiogenesis factor in a rat distraction osteogenesis model

Objective: The purpose of this study was to observe the effect of the accordion technique (AT) during the distraction phase on chondrogenesis and bone regeneration in a rat femoral distraction osteogenesis (DO) model, and investigate its potential mechanism for reducing the total treatment time of DO. Methods: Fifty-four male Sprague-Dawley (SD) rats that were specific-pathogen-free (SPF) were subjected to DO surgery on the right femur. The distraction rate was 0.5 mm/day for 10 days, following a latency period of 5 days. Rats were randomly divided into Control (no AT, n = 18), Group LA (low amplitude with AT, n = 18), and Group HA (high amplitude with AT, n = 18) according to different AT protocols in the distraction phase. Rats were respectively euthanized by anesthesia overdose at 2, 4 and 6 weeks of the consolidation phase, and the femurs were harvested. Digital radiography, micro-computed tomography (micro-CT), biomechanical tests, and histomorphological analysis were used to assess the quality of regenerated bone in the distraction area. Results: Digital radiographic, micro-CT, biomechanical tests, and histological analysis revealed an increase in early-stage callus formation (p < 0.05) and improved blood supply to the callus tissue in Group LA, as compared to both the Control and Group HA. The enhanced differentiation of fibrous and cartilaginous tissue into bone tissue was also observed in Group LA, leading to improved strength and stiffness (p < 0.05) of the regenerated bone at 6 weeks of the consolidation phase. The angiogenic (hypoxia-inducible factor-1α (HIF-1α) and vascular endothelial growth factor (VEGF), p < 0.05) and osteogenic (runt-related transcription factor 2 (RUNX2), osteocalcin (OCN) and osteopontin (OPN), p < 0.05) biomarkers were higher expressed in Group LA at 2 and 4 weeks of consolidation phase, whereas decreased at 6 weeks of consolidation phase. Conclusion: The application of AT with low amplitude during the distraction phase can enhance chondrogenesis and bone regeneration by activating the angiogenesis factor pathway and upregulating the expression of osteogenic-related biomarkers such as HIF-1α, VEGF, RUNX2, OCN, and OPN.

Application of BMP in Bone Tissue Engineering

At present, bone nonunion and delayed union are still difficult problems in orthopaedics. Since the discovery of bone morphogenetic protein (BMP), it has been widely used in various studies due to its powerful role in promoting osteogenesis and chondrogenesis. Current results show that BMPs can promote healing of bone defects and reduce the occurrence of complications. However, the mechanism of BMP in vivo still needs to be explored, and application of BMP alone to a bone defect site cannot achieve good therapeutic effects. It is particularly important to modify implants to carry BMP to achieve slow and sustained release effects by taking advantage of the nature of the implant. This review aims to explain the mechanism of BMP action in vivo, its biological function, and how BMP can be applied to orthopaedic implants to effectively stimulate bone healing in the long term. Notably, implantation of a system that allows sustained release of BMP can provide an effective method to treat bone nonunion and delayed bone healing in the clinic.

Controlled growth factor delivery system with osteogenic-angiogenic coupling effect for bone regeneration

Objective

Bone regeneration involves a coordinated cascade of events that are regulated by several cytokines and growth factors, among which bone morphogenic protein-2 (BMP-2), vascular endothelial growth factor (VEGF) and fibroblast growth factor-2 (FGF-2) play important roles. In this study, we investigated the effects of dual release of the three growth factors on bone regeneration in femur defects.

Methods

A composite consisting of Gelatin microparticles loaded with VEGF/FGF-2 and poly(lactic-co-glycolic acid)-poly(ethylene glycol)-carboxyl (PLGA-PEG-COOH) microparticles loaded with BMP-2 encapsulated in a nano hydroxyapatite-poly actic-co-glycolic acid (nHA-PLGA) scaffold was prepared for the dual release of the growth factors.

Results

On the 14th day, decreased release rate of BMP-2 compared with FGF-2 and VEGF was observed. However, after 14 days, compared to FGF-2 and VEGF, BMP-2 showed an increased release rate. Controlled dual release of BMP-2 and VEGF, FGF-2 resulted in a significant osteogenic differentiation of bone mesenchymal stem cells (BMSCs). Moreover, effects of the composite scaffold on functional connection of osteoblast-vascular cells during bone development were evaluated. The synergistic effects of dual delivery of growth factors were shown to promote the expression of VEGF in BMSCs. Increased secretion of VEGF from BMSCs promoted the proliferation and angiogenic differentiation of human umbilical vein endothelial cells (HUVECs) in the co-culture system. At 12 weeks after implantation, blood vessel and bone formation were analyzed by micro-CT and histology. The composite scaffold significantly promoted the formation of blood vessels and new bone in femur defects.

Conclusions

These findings demonstrate that dual delivery of angiogenic factors and osteogenic factors from Gelatin and PLGA-PEG-COOH microparticles-based composite scaffolds exerted an osteogenic-angiogenic coupling effect on bone regeneration. This approach will inform on the development of appropriate designs of high-performance bioscaffolds for bone tissue engineering.

Protective effect of modafinil on skin flap survival in the experimental random-pattern skin flap model in rats: The role of ATP-sensitive potassium channels and nitric oxide pathway

BACKGROUND

The brain-stimulating agent modafinil acts through nitric oxide (NO) and adenosine triphosphate (ATP)-sensitive potassium (KATP) channels, involved in the skin flap survival (SFS). The main aim of this study was to investigate the efficacy of modafinil on SFS in rats through the involvement of NO pathway and KATP channels.

METHODS

Using controlled experiment study design, we enrolled a sample of Wistar male rats. Different doses of modafinil (10, 25, 50, and 100 mg/kg) were injected intraperitoneally (i.p.) before the surgery. L-NAME (non-selective nitric oxide synthase [NOS] inhibitor), aminoguanidine (inducible NOS inhibitor), and 7-nitroindazole (neuronal NOS inhibitor) were administered prior to modafinil. The role of KATP channels was determined by coadministering glibenclamide (KATP channel blocker) or cromakalim (KATP channel opener) with modafinil. The predictor variables were administration of different doses of modafinil, and the coadministration of modafinil with L-NAME, aminoguanidine, 7-nitroindazole, glibenclamide, and cromakalim. The main outcome variables included the percentage of necrotic area (PNA) in flap tissues, histopathological results, vascular endothelial growth factor (VEGF) immunohistochemical (IHC) staining, and nitrite concentrations. Appropriate statistics were computed considering p-value ≤ 0.05 significant.

RESULTS

Modafinil 25 mg/kg was the most effective dose (PNA: 26 [95% CI: 19-33]) vs. control (PNA: 81 [95% CI: 71-92]) (p< 0.001). All NOS inhibitors significantly reversed the protective effect of modafinil (p< 0.001). Non-effective dose of cromakalim had a synergistic effect with the sub-effective dose of modafinil (10 mg/kg), while glibenclamide reversed the effect of modafinil 25 mg/kg (p< 0.001).

CONCLUSIONS

Modafinil increases SFS mediated by NO pathway and KATP channels, which could therefore be a target to improve SFS.

Histomorphometric Evaluation of Critical-Sized Bone Defects Using Osteomeasure and Aperio Image Analysis Systems

Most histological evaluations of critical-sized bone defects are limited to the analysis of a few regions of interest at a time. Manual and semiautomated histomorphometric approaches often have intra- and interobserver subjectivity, as well as variability in image analysis methods. Moreover, the production of large image data sets makes histological assessment and histomorphometric analysis labor intensive and time consuming. Herein, we tested and compared two image segmentation methods: thresholding (automated) and region-based (manual) modes, for quantifying complete image sets across entire critical-sized bone defects, using the widely used Osteomeasure system and the freely downloadable Aperio Image Scope software. A comparison of bone histomorphometric data showed strong agreement between the automated segmentation mode of the Osteomeasure software with the manual segmentation mode of Aperio Image Scope analysis (bone formation R² = 0.9615 and fibrous tissue formation R² = 0.8734). These results indicate that Aperio is capable of handling large histological images, with excellent speed performance in producing highly consistent histomorphometric evaluations compared with the Osteomeasure image analysis system. The statistical evaluation of these two major bone parameters demonstrated that Aperio Image Scope is as capable as Osteomeasure. This study developed a protocol to improve the quality of results and reduce analysis time, while also promoting the standardization of image analysis protocols for the histomorphometric analysis of critical-sized bone defect samples. Impact Statement Despite bone tissue engineering innovations increasing over the last decade, histomorphometric analysis of large bone defects used to study such approaches continues to pose a challenge for pathological assessment. This is due to the resulting large image data set, and the lack of a gold standard image analysis protocol to quantify histological outcomes. Herein, we present a standardized protocol for the image analysis of critical-sized bone defect samples stained with Goldner's Trichrome using the Osteomeasure and Aperio Image Scope image analysis systems. The results were critically examined to determine their reproducibility and accuracy for analyzing large bone defects.

Relevant advances in bone lengthening research: a bibliometric analysis of the 100 most-cited articles published from 2001 to 2017

This study aimed to assess the scientific production of bone lengthening research by identifying the most-cited papers. All articles including the term 'bone lengthening' published between 2001 and 2017 were retrieved through the Web of Science database. The 100 most-cited articles on bone lengthening included a total of 4244 citations, with 414 (9.7%) citations in 2017. There was an average of 249.6 citations per year. The articles predominantly addressed biomechanics and bone formation (38). Different surgical techniques, including intramedullary nail (14), Ilizarov (nine), intramedullary skeletal kinetic distractor (ISKD) (six), Taylor spatial frame (6), the PRECICE device (three), and lengthening and submuscular locking plate (three), were the second most-studied topic. Most studies were therapeutic (58), whereas 30 studies were experimental investigations using animal models. Among the clinical studies, case series were predominant (level of evidence IV) (57). This study presents the first bibliometric analysis of the most relevant articles on bone lengthening. The list is relatively comprehensive in terms of identifying the top issues in this field. However, the most influential clinical studies have a poor level of evidence, although a slight tendency toward a better level of evidence has been observed in more recent years.

Progress in biological reconstruction and enhanced bone revitalization for bone defects

Bone defect reconstruction with artificial materials may produce good functional recovery in the short term. Over time, the durability of artificial materials becomes an issue, and therefore, artificial materials cannot be considered a permanent solution to reconstruction. For long-term outcomes, the goal is to regain function, permanence, and form that are as close to normal as possible. Thus, physiological materials are desirable for use in reconstruction. Biological reconstruction involves the use of materials that are modified in vivo following reconstruction of bone defects. The goal is to achieve bone union, bone revival and remodeling, with biointegration of soft tissue and bone. Allograft use has been the mainstay of bone defect reconstruction in most parts of the world, although in some countries like Japan, allogeneic bone is difficult to obtain due to socio-religious concerns. Therefore, we developed new biological reconstruction techniques to overcome this problem. Bone derived from distraction osteogenesis is autologous bone, which must be an ideal reconstruction material for its biological affinity, strength, resilience, and immunity to infection. When applying this method to patients with malignant disease however, it is important to preserve as much of the local soft tissue as possible, and the clinician must be especially careful of infection and callus formation. Liquid nitrogen treatment of tumor-bearing bone produces equal, if not better, bone revitalization compared to other forms of treatment to date. Reconstruction with liquid nitrogen-treated bone involves resecting the diseased bone and returning it to the body following liquid nitrogen treatment (free-freezing method). Another method involves dislocating the joint proximal to the tumor, or cutting the bone while the distal side remains attached to the body and the limb inverted and treated with liquid nitrogen (pedicle freezing method). When both methods are possible, the pedicle freezing method is preferable since it is performed with minimal osteotomy. Our recent research has looked into the possible role of adipose-derived stem cells in promoting bone fusion and revitalization. This method has produced promising results for the future of biological reconstruction.

Matrix Mediated Viral Gene Delivery: A Review

Polymeric matrices inherently protect viral vectors from pre-existing immune conditions, limit dissemination to off-target sites, and can sustain vector release. Advancing methodologies in development of particulate based vehicles have led to improved encapsulation of viral vectors. Polymeric delivery systems have contributed to increasing cellular transduction, responsive release mechanisms, cellular infiltration, and cellular signaling. Synthetic polymers are easily customizable, and are capable of balancing matrix retention with cellular infiltration. Natural polymers contain inherent biorecognizable motifs adding therapeutic efficacy to the incorporated viral vector. Recombinant polymers use highly conserved motifs to carefully engineer matrices, allowing for precise design including elements of vector retention and responsive release mechanisms. Composite polymer systems provide opportunities to create matrices with unique properties. Carefully designed matrices can control spatiotemporal release patterns that synergize with approaches in regenerative medicine and antitumor therapies.

Angiogenesis impairment by the NADPH oxidase-triggered oxidative stress at the bone-implant interface: Critical mechanisms and therapeutic targets for implant failure under hyperglycemic conditions in diabetes

Mechanism underlying the diabetes-induced poor osteointegration of implants remains elusive, making it a challenge to develop corresponding solutions. Here, we studied the role of angiogenesis in the diabetes-induced poor bone repair at the bone-implant interface (BII) and the related mechanisms. In vivo, titanium screws were implanted in the femurs of mice, and, in vitro, vascular endothelial cell (VEC) was cultured on titanium surface. Results showed that, compared with normal milieu (NM), diabetic milieu (DM) led to angiogenesis inhibition around implants which resulted in reduced osteoprogenitors and poor bone formation on BII in vivo. In vitro, DM caused significant increase of NADPH oxidases (NOX), dysfunction of mitochondria and overproduction of reactive oxygen species (ROS) in VEC on titanium surface, inducing obvious cell dysfunction. Both Mito-TEMPO (Mito, a mitochondria-targeted ROS antagonist) and apocynin (APO, a NOX inhibitor) effectively attenuated the oxidative stress and dysfunction of VEC, with the beneficial effects of APO significantly better than those of Mito. Further study showed that the diabetes-induced metabolic disturbance of VEC was significantly related to the increase of advanced glycation end products (AGEs) at the BII. Our results suggested that the AGEs-related and NOX-triggered cellular oxidative stress leads to VEC dysfunction and angiogenesis impairment at the BII, which plays a critical role in the compromised implant osteointegration under diabetic conditions. These demonstrated new insights into the BII in pathological states and also provided NOX and AGEs as promising therapeutic targets for developing novel implant materials to accelerate the angiogenesis and osteointegration of implants in diabetic patients with hyperglycemia.

STATEMENT OF SIGNIFICANCE

The high failure rate of bone implants in diabetic patients causes patients terrible pain and limits the clinical application of implant materials. The mechanism underlying this phenomenon needs elucidation so that it would be possible to develop corresponding solutions. Our study demonstrated that the AGEs-related and NOX-triggered oxidative stress of VEC leads to angiogenesis impairment at the bone-implant interface (BII) in diabetes. These are critical mechanisms underlying the compromised implant osteointegration in diabetic hyperglycemia. These provide new insights into the BII in diseased states and also suggest NOX and AGEs as crucial therapeutic targets for developing novel implant materials which could modulate the oxidative stress on BII to get improved osteointegration and reduced implant failure, especially in diabetic patients.

Sequential delivery of VEGF, FGF-2 and PDGF from the polymeric system enhance HUVECs angiogenesis in vitro and CAM angiogenesis

Angiogenesis is an organized series of events, beginning with vessel destabilization, followed by endothelial cell re-organization, and ending with vessel maturation. The formation of a mature vascular network requires precise spatial and temporal regulation of a large number of angiogenic factors, including vascular endothelial growth factor (VEGF), basic fibroblast growth factor-2 (FGF-2) and platelet-derived growth factor (PDGF). VEGF aids in vascular permeability and endothelial cell recruitment, FGF-2 activates endothelial cell proliferation and migration while PDGF stimulates vascular stability. Accordingly, VEGF may inhibit vessel stabilization while PDGF may inhibit endothelial cell recruitment. Therefore, a new polymeric system was prepared by the supercritical carbon dioxide foaming technology, which realized sequential delivery of two or more growth factors with the controlled dose and rate. Increased release of VEGF (71.10%) and FGF-2 (69.76%) compared to PDGF (43.17%) was observed for the first 7 days. Thereafter, up till 21 days, an increased rate of release of BMP-2 compared to VEGF 165 was observed. The effects of PDGF-PLAms/VEGF-FGF-2-PLGA scaffolds on angiogenesis were investigated by human umbilical vein endothelial cells (HUVECs) angiogenic differentiation in vitro and chorioallantoic membrane (CAM) angiogenesis in vivo. Sequential delivery of VEGF, FGF-2 and PDGF from structural polymer scaffolds with distinct kinetics resulted in significant angiogenic differentiation of HUVECs and rapid formation of mature vascular networks in chorioallantoic membrane. This study reported a composite scaffold with distinct release kinetics, and these results clearly indicated the importance of sequential delivery of multiple growth factors in tissue regeneration and engineering.

Sclerostin stimulates angiogenesis in human endothelial cells

Sclerostin, negative regulator of bone formation, has been originally known as an osteocyte product. Recently, it has been also detected in hypertrophic chondrocytes, distinctive cells of avascular cartilage which is invaded by capillaries and then replaced by vascularized bone. Thus, we hypothesized that sclerostin, in addition to its role already known, may exert an angiogenic activity. We first proved that sclerostin increased the proliferation of human umbilical vein endothelial cells (HUVECs), and next, by using the chicken chorioallantoic membrane (CAM) in vivo assay, we demonstrated that it exerts an angiogenic activity similar to that of vascular endothelial growth factor (VEGF). This last finding was reinforced by several in vitro approaches. Indeed, we showed that sclerostin induced the formation of a network of anastomosing tubules, a significant increase in the percentage of tubule number, total tubule length and number of junctions, as well as the ability of sclerostin-stimulated HUVECs to organize capillary-like structures and closed-meshes similar to VEGF. The angiogenic response elicited by the protein may be due to the binding to its receptor, LRP6, which is highly expressed at mRNA and protein levels by sclerostin treated HUVECs and through the production of two well-known pro-angiogenic cytokines, VEGF and placental growth factor (PlGF). Finally, we demonstrated that sclerostin was also responsible for the recruitment of osteoclasts and their circulating monocyte progenitors. Overall, these findings showed for the first time the new angiogenic in vitro role of sclerostin which could be also considered as a novel molecule in angiogenesis-osteogenesis coupling.

Synergistic Effects of Vascular Endothelial Growth Factor on Bone Morphogenetic Proteins Induced Bone Formation In Vivo: Influencing Factors and Future Research Directions

Vascular endothelial growth factor (VEGF) and bone morphogenetic proteins (BMPs), as key mediators in angiogenesis and osteogenesis, are used in a combined delivery manner as a novel strategy in bone tissue engineering. VEGF has the potential to enhance BMPs induced bone formation. Both gene delivery and material-based delivery systems were incorporated in previous studies to investigate the synergistic effects of VEGF and BMPs. However, their results were controversial due to variation of methods incorporated in different studies. Factors influencing the synergistic effects of VEGF on BMPs induced bone formation were identified and analyzed in this review to reduce confusion on this issue. The potential mechanisms and directions of future studies were also proposed here. Further investigating mechanisms of the synergistic effects and optimizing these influencing factors will help to generate more effective bone regeneration.

The Use of Sequential VEGF- and BMP2-Releasing Biodegradable Scaffolds in Rabbit Mandibular Defects

PURPOSE

Promising developments have materialized in reconstructive surgical procedures with the applications of tissue engineering. In our study, we used tissue scaffolds fabricated from polylactic acid-polyethylene glycol (PLLA-PEG) copolymers to ensure different release rates of selective growth factors recombinant human bone morphogenetic protein 2 [rhBMP-2] and vascular endothelial growth factor (rhVEGF165) in the repair of mandibular bone defects.

MATERIALS AND METHODS

In our experimental study, 54 New Zealand rabbits were used. The rabbits were separated into 4 groups: group I (control group), PLLA-PEG scaffold only; group II, PLLA-PEG scaffold plus rhBMP-2 application; group III, PLLA-PEG scaffold plus VEGF165 application; and group IV, PLLA-PEG scaffold plus rhBMP-2 and VEGF165 applications. The rabbits were killed at 4 and 8 weeks postoperatively, and histopathologic and immunohistochemical assessments were performed.

RESULTS

The greatest bone volume was observed in rhBMP-2-containing groups, the greatest vessel volume was observed in VEGF165-containing groups; however, the scaffold containing rhBMP-2 and VEGF165 provided the best outcomes in conjunction with increased remodeling of the new bone.

CONCLUSIONS

The use of polymer tissue scaffolds that release rhVEGF165 and rhBMP-2 in coordination and mimic the natural healing process in the regeneration of especially complex tissues, such as bone, is a promising treatment alternative in the field of reconstructive surgery.

Design and Characterization of Fibrin-Based Acoustically Responsive Scaffolds for Tissue Engineering Applications

Hydrogel scaffolds are used in tissue engineering as a delivery vehicle for regenerative growth factors. Spatiotemporal patterns of growth factor signaling are critical for tissue regeneration, yet most scaffolds afford limited control of growth factor release, especially after implantation. We previously found that acoustic droplet vaporization can control growth factor release from a fibrin scaffold doped with a perfluorocarbon emulsion. This study investigates properties of the acoustically responsive scaffold (ARS) critical for further translation. At 2.5 MHz, acoustic droplet vaporization and inertial cavitation thresholds ranged from 1.5 to 3.0 MPa and from 2.0 to 7.0 MPa peak rarefactional pressure, respectively, for ARSs of varying composition. Viability of C3H/10T1/2 cells, encapsulated in the ARS, did not decrease significantly for pressures below 4 MPa. ARSs with perfluorohexane emulsions displayed higher stability versus those with perfluoropentane emulsions, while surrogate payload release was minimal without ultrasound. These results enable the selection of ARS compositions and acoustic parameters needed for optimized spatiotemporally controlled release.

Uncultured autogenous adipose-derived regenerative cells promote bone formation during distraction osteogenesis in rats

BACKGROUND

Adipose-derived stem cells have recently shown differentiation potential in multiple mesenchymal lineages in vitro and in vivo. These cells can be easily isolated in large amounts from autologous adipose tissue and used without culturing or differentiation induction, which may make them relatively easy to use for clinical purposes; however, their use has not been tested in a distraction osteogenesis model.

QUESTION/PURPOSES

The question of this animal study in a rodent model of distraction osteogenesis was whether uncultured adipose-derived regenerative cells (ADRCs), which can easily be isolated in large amounts from autologous adipose tissue and contain several types of stem and regenerative cells, promote bone formation in distraction osteogenesis. We evaluated this using several tools: (1) radiographic analysis of bone density; (2) histological analysis of the callus that formed; (3) biomechanical testing; (4) DiI labeling (a method of membrane staining for postimplant celltracing); and (5) real-time polymerase chain reaction.

METHODS

Sixty rats were randomly assigned to three groups. Physiological saline (control group), Type I collagen gel (collagen group), or a mixture of ADRC and Type I collagen gel (ADRC group) was injected into the distracted callus immediately after distraction termination. To a rat femur an external fixator was applied at a rate of 0.8 mm/day for 8 days.

RESULTS

The bone density of the distracted callus in the ADRC group increased by 46% (p = 0.003, Cohen's d = 10.2, 95% confidence interval [CI] ± 0.180) compared with the control group at 6 weeks after injection. The fracture strength in the ADRC group increased by 66% (p = 0.006, Cohen's d = 1.32, 95% CI ± 0.180) compared with the control group at 6 weeks after injection. Real-time reverse transcription-polymerase chain reaction of the distracted callus from the ADRC group had higher levels of bone morphogenetic protein-2 (7.4 times higher), vascular endothelial growth factor A (6.8 times higher), and stromal cell-derived factor-1 (4.3 times higher). Cell labeling in the newly formed bone showed the ADRCs differentiated into osseous tissue at 3 weeks after injection.

CONCLUSIONS

The injection of ADRCs promoted bone formation in the distracted callus and this mechanism involves both osteogenic differentiation and secretion of humoral factors such as bone morphogenetic protein-2 or vascular endothelial growth factor A that promotes osteogenesis or angiogenesis.

CLINICAL RELEVANCE

The availability of an easily accessible cell source may greatly facilitate the development of new cell-based therapies for regenerative medicine applications in the distraction osteogenesis.

Different approaches for interpretation and reporting of immunohistochemistry analysis results in the bone tissue - a review

BACKGROUND

Immunohistochemistry (IHC) is a well-established, widely accepted method in both clinical and experimental parts of medical science. It allows receiving valuable information about any process in any tissue, and especially in bone. Each year the amount of data, received by IHC, grows in geometric progression. But the lack of standardization, especially on the post-analytical stage (interpreting and reporting of results), makes the comparison of the results of different studies impossible.

METHODS

Comprehensive PubMED literature search with a combination of search words "immunohistochemistry" and "scoring system" was performed and 773 articles describing IHC results were identified. After further manual analysis 120 articles were selected for detailed evaluation of used approaches.

RESULTS

Six major approaches to the interpretation and presentation of IHC analysis results were identified, analyzed and described.

CONCLUSIONS

The overview of the existing approaches in evaluation and interpretation of IHC data, which are provided in the article, can be used in bone tissue research and for either better understanding of existing scoring systems or developing a new one. Standard multiparametric, semiquantitative IHC scoring systems should simplify and clarify the process of interpretation and reporting of received data.

VIRTUAL SLIDES

The virtual slide(s) for this article can be found here: http://www.diagnosticpathology.diagnomx.eu/vs/13000_2014_221.

Role of angiogenesis in bone repair

Bone vasculature plays a vital role in bone development, remodeling and homeostasis. New blood vessel formation is crucial during both primary bone development as well as fracture repair in adults. Both bone repair and bone remodeling involve the activation and complex interaction between angiogenic and osteogenic pathways. Interestingly studies have demonstrated that angiogenesis precedes the onset of osteogenesis. Indeed reduced or inadequate blood flow has been linked to impaired fracture healing and old age related low bone mass disorders such as osteoporosis. Similarly the slow penetration of host blood vessels in large engineered bone tissue grafts has been cited as one of the major hurdle still impeding current bone construction engineering strategies. This article reviews the current knowledge elaborating the importance of vascularization during bone healing and remodeling, and the current therapeutic strategies being adapted to promote and improve angiogenesis.

The effect of altering the mechanical loading environment on the expression of bone regenerating molecules in cases of distraction osteogenesis

Distraction osteogenesis (DO) is a surgical technique where gradual and controlled separation of two bony fragments following an osteotomy leads to the induction of new bone formation in the distracted gap. DO is used for limb lengthening, correction of bony deformities, and the replacement of bone loss secondary to infection, trauma, and tumors. Although DO gives satisfactory results in most cases, one major drawback of this technique is the prolonged period of time the external fixator has to be kept on until the newly formed bone consolidates thus leading to numerous complications. Numerous attempts at accelerating bone formation during DO have been reported. One specific approach is manipulation of the mechanical environment during DO by applying changes in the standard protocol of distraction. Attempts at changing this mechanical environment led to mixed results. Increasing the rate or applying acute distraction, led to poor bone formation in the distracted zone. On the other hand, the addition of compressive forces (such as weight bearing, alternating distraction with compression or by over-lengthening, and then shortening) has been reported to increase bone formation. It still remains unclear why these alterations may lead to changes in bone formation. While the cellular and molecular changes occurring during the standard DO protocol, specifically increased expression of transforming growth factor-β1, platelet-derived growth factor, insulin-like growth factor, basic fibroblast growth factor, vascular endothelial growth factor, and bone morphogenic proteins have been extensively investigated, the literature is sparse on the changes occurring when this protocol is altered. It is the purpose of this article to review the pertinent literature on the changes in the expression of various proteins and molecules as a result of changes in the mechanical loading technique in DO and try to define potential future research directions.

Diamond squid (Thysanoteuthis rhombus)-derived chondroitin sulfate stimulates bone healing within a rat calvarial defect

Chondroitin sulfate (CS) has been suggested to be involved in bone formation and mineralization processes. A previous study showed that squid-derived CS (sqCS) has osteoblastogenesis ability in cooperation with bone morphogenetic protein (BMP)-4 in vitro. However, in vivo, osteogenic potential has not been verified. In this study, we created a critical-sized bone defect in the rat calvaria and implanted sqCS-loaded gelatin hydrogel sponges (Gel) into the defect with or without BMP-4 (CS/BMP/Gel and CS/Gel, respectively). At 15 weeks, bone repair rate of CS/Gel-treated defects and CS/BMP/Gel-treated defects were 47.2% and 51.1%, respectively, whereas empty defects and defects with untreated sponges showed significantly less bone ingrowth. The intensity of von Kossa staining of the regenerated bone was less than that of the original one. Mineral apposition rates at 9 to 10 weeks were not significantly different between all treatment groups. Although bone repair was not completed, sqCS stimulated bone regeneration without BMP-4 and without external mesenchymal cells or preosteoblasts. Therefore, sqCS is a promising substance for promotion of osteogenesis.

Acoustic droplet-hydrogel composites for spatial and temporal control of growth factor delivery and scaffold stiffness

Wound healing is regulated by temporally and spatially restricted patterns of growth factor signaling, but there are few delivery vehicles capable of the "on-demand" release necessary for recapitulating these patterns. Recently we described a perfluorocarbon double emulsion that selectively releases a protein payload upon exposure to ultrasound through a process known as acoustic droplet vaporization (ADV). In this study, we describe a delivery system composed of fibrin hydrogels doped with growth factor-loaded double emulsion for applications in tissue regeneration. Release of immunoreactive basic fibroblast growth factor (bFGF) from the composites increased up to 5-fold following ADV and delayed release was achieved by delaying exposure to ultrasound. Releasates of ultrasound-treated materials significantly increased the proliferation of endothelial cells compared to sham controls, indicating that the released bFGF was bioactive. ADV also triggered changes in the ultrastructure and mechanical properties of the fibrin as bubble formation and consolidation of the fibrin in ultrasound-treated composites were accompanied by up to a 22-fold increase in shear stiffness. ADV did not reduce the viability of cells suspended in composite scaffolds. These results demonstrate that an acoustic droplet-hydrogel composite could have broad utility in promoting wound healing through on-demand control of growth factor release and/or scaffold architecture.

Cimento de aluminato de cálcio: uso em defeitos ósseos induzidos em fêmur de coelhos

Avaliou-se o comportamento do cimento de aluminato de cálcio em defeitos ósseos induzidos experimentalmente em fêmur de 12 coelhos Nova Zelândia Branco, distribuídos em três grupos experimentais, correspondentes aos tempos de observação pós-operatória de 15 (G15), 30 (G30) e 60 (G60) dias. Realizaram-se avaliações clínico-cirúrgicas, radiográficas e histológicas, a fim de se observar o potencial osteoindutor e osteocondutor do biomaterial no defeito ósseo, e se houve osteointegração. O cimento de aluminato de cálcio, na formulação utilizada, mostrou-se biocompatível, porém não atuou como osteocondutor ou osteoindutor.

Advanced BMP gene therapies for temporal and spatial control of bone regeneration

Spatial and temporal patterns of bone morphogenetic protein (BMP) signaling are crucial to the assembly of appropriately positioned and shaped bones of the face and head. This review advances the hypothesis that reconstitution of such patterns with cutting-edge gene therapies will transform the clinical management of craniofacial bone defects attributed to trauma, disease, or surgical resection. Gradients in BMP signaling within developing limbs and orofacial primordia regulate proliferation and differentiation of mesenchymal progenitors. Similarly, vascular and mesenchymal cells express BMPs in various places and at various times during normal fracture healing. In non-healing fractures of long bones, BMP signaling is severely attenuated. Devices that release recombinant BMPs promote healing of bone in spinal fusions and, in some cases, of open fractures, but cannot control the timing and localization of BMP release. Gene therapies with regulated expression systems may provide substantial improvements in efficacy and safety compared with protein-based therapies. Synthetic gene switches, activated by pharmacologics or light or hyperthermic stimuli, provide several avenues for the non-invasive regulation of the expression of BMP transgenes in both time and space. Through new gene therapy platforms such as these, active control over BMP signaling can be achieved to accelerate bone regeneration.

The effect of anodized implants coated with combined rhBMP-2 and recombinant human vascular endothelial growth factors on vertical bone regeneration in the marginal portion of the peri-implant

OBJECTIVES

The aim of this study was to evaluate the effect of anodized implants coated with combined rhBMP-2 and recombinant human vascular endothelial growth factors (rhVEGFs) on vertical bone regeneration in the marginal portion of the peri-implant.

STUDY DESIGN

Supra-alveolar defects were created in 3 male beagle dogs. Each animal received 8 implants that were either coated with a single growth factor (rhBMP-2) or combined growth factors (rhBMP-2 + rhVEGF), or an anodized implant (the control group). The amount of the vertical bone regeneration, the bone-implant contact, and the intrathread bone density were investigated using histomorphometric analysis at 8 weeks.

RESULTS

The bone morphogenetic protein (BMP) group and the BMP-VEGF group showed vertical alveolar bone regeneration and enhanced bone-implant contact in the microthread compared with the control group (P < .05).

CONCLUSIONS

Anodized implants coated with rhBMP-2 and rhBMP - 2 + rhVEGF can induce vertical alveolar bone regeneration, but the combined effect of rhBMP-2 and rhVEGF was not verified.

The effect of bone morphogenic protein-2-coated tri-calcium phosphate/hydroxyapatite on new bone formation in a rat model of femoral distraction osteogenesis

BACKGROUND AIMS

Distraction osteogenesis (DO) is an increasingly popular technique used to stimulate new bone formation to treat orthopedic disorders resulting from bone defects and deficits. Because of various possible complications that can occur during the long consolidation period, the development of procedures to accelerate regenerated ossification is clearly desirable. The purpose of this study was to evaluate the effect of single insertions of bone morphogenic protein-2 (BMP-2), delivered by tri-calcium phosphate (TCP)/hydroxyapatite (HA), administered at osteotomy sites, on the rate of new bone formation during DO in a rat model.

METHODS

Thirty-six male Sprague-Dawley rats, aged 12 weeks and weighing a mean (± standard deviation) of 401 ± 14 g, were used in this study. The animals were randomized into three groups of 12 rats each. Group I served as a control, group II was treated with only TCP/HA, and group III was treated with recombinant human (rh) BMP-2-coated TCP/HA. Materials were inserted into the medullary canal at the femoral osteotomy site at the end of the lengthening period. After a 7-day latent phase, distraction was commenced on day 0 at a rate of 0.50 mm every 6 h for 5 days (2 mm daily), resulting in a total of 10 mm of lengthening by day 5. At two different time-points [at 4 weeks (day 33) and 8 weeks (day 61) after cessation of distraction], the progress of bone formation was determined with microcomputed tomography (micro-CT), histology and real-time polymerase chain reaction (PCR). The mean and standard deviation of the values obtained from the experiment were computed and statistical analyses performed using anova. Statistical significance was established at P < 0.05. Results. Radiographically, all group III rat femurs exhibited bridging callus formation 8 weeks after cessation of distraction, whereas group II rat femurs demonstrated non-bridging callus formation. None of the group I rat femurs showed callus in the central zone of the distraction gap. For micro-CT, bone formation and remodeling of the distraction regeneration with beta-TCP/HA coated with rhBMP-2 had greater values than the control sides at all time-points. Two-dimensional quantitative analysis of the distraction regeneration showed that the bone volume of group III had higher values than groups I and II at 4 weeks (P < 0.05). This difference was also evident at 8 weeks. With hematoxylin and eosin (H&E) staining, the control group (group I) did not show any bone tissue at the distraction site. In group II at 4 weeks, abundant fibrous tissue surrounding the particles was visible with some areas of woven bone. At 8 weeks, the woven bone covered the particles but not the whole circumference. In group III at 4 weeks, much of the woven bone surrounded the particle with some fibrocartilagenous materials. At 8 weeks, woven bone covering the whole circumference of the particles was visible.

CONCLUSIONS

Application of rhBMP-2, at the end of the rather rapid distraction period, as a single bolus significantly increased the osteogenic process, while beta-TCP/HA behaved effectively as a sustained delivery system for this osteoinductive protein.

NELL1 promotes high-quality bone regeneration in rat femoral distraction osteogenesis model

NELL1 (NEL-like molecule-1; NEL [a protein strongly expressed in neural tissue encoding epidermal growth factor like domain]) is a cranisynostosis-associated molecule directly regulated by Runx2, the master molecule in controlling osteoblastic differentiation. NELL1 has exhibited potent osteoinductive activity for bone regeneration in several animal models. However, its capacity for promoting repair of long-bone defects remains unknown. In this study, we investigated the osteogenic effects of NELL1 on femoral distraction osteogenesis using adenoviral gene delivery and multiple approaches of in vivo analysis. Thirty Sprague-Dawley (SD) rats were randomly assigned to 3 groups for treatment (n=10 each): adenovirus-green fluorescent protein (Ad-GFP)-NELL1 or Ad-GFP at 1×10⁹ plaque-forming units/ml diluted in saline, or saline alone. The femoral distraction was at a speed of 0.25 mm every 12h for 14 days, and a single injection of Ad-GFP-NELL1 or Ad-GFP was given at the mid-distraction period. The effective NELL1 delivery in vivo after Ad-GFP-NELL1 injection was evaluated by optical imaging. The bone regeneration was assessed quantitatively at days 21, 28, 42, and 56 by live 3-D micro-computed tomography (micro-CT), and animals were sacrificed at day 56 for biomechanical testing and histological analysis. Exogenous NELL1 was expressed in the distracted gap for at least 14 days after Ad-GFP-NELL1 transfection. The bone union rate in the distracted gap was significantly higher with Ad-GFP-NELL1 than with Ad-GFP (9/9 vs. 4/9 rats) or saline alone (5/9 rats) at day 56. The serial 3-D micro-CT images and quantitation obtained with the development and application of radiolucent external fixators showed less callus but more mature cortical bones formed with Ad-GFP-NELL1 than with Ad-GFP transfection and saline administration during distraction osteogenesis. The biomechanical properties of femur samples with Ad-GFP-NELL1 transfection were better than samples with Ad-GFP transfection or saline treatment, and were similar with unoperated femurs. Histology revealed cartilaginous tissues in the middle of distraction gaps with Ad-GFP transfection and saline treatment but only bony bridges with Ad-GFP-NELL1 transfection at the final time point (day 56). Coincidently, the expression of Runx2, BMP2, and BMP7 did not differ among groups at day 56, whereas the expression of osteocalcin and osteopontin was slightly higher with Ad-GFP-NELL1 transfection. Thus, sustained Ad-NELL1 protein delivery into a local area of a rat femoral distraction osteogenesis model remarkably improved regeneration of good-quality bones and accelerated bone union at a high rate. Acquiring serial micro-CT data during rat femoral distraction osteogenesis and regional adenovirus delivery of NELL1 may facilitate future in vivo studies.

Immunohistochemical expression of vascular endothelial growth factor (VEGF) in different types of odontogenic cysts

The objective of the present study was to evaluate vascular endothelial growth factor (VEGF) expression in different types of odontogenic cysts. A total of 25 parakeratotic odontogenic keratocysts (POKCs), 16 orthokeratotic odontogenic keratocysts (OOKCs), and 28 follicular cysts (FCs) were evaluated semiquantitatively for immunohistochemical analysis of VEGF in epithelial cells, endothelial cells of blood vessels, inflammatory cells and focally stromal cells. A significant different expression of VEGF in all cell components was found in keratocysts compared to FCs. The POKCs (80%) and OOKCs (68%) showed more than 50% VEGF positive epithelial cells, whereas the majority of FCs (71%) were either negative in the epithelium or showed less than 10% positive cells. Similarly, the POKCs (88%) and OOKCs (68%) showed more than 50% positive endothelial cells, whereas the FCs (75%) were either negative or showed less than 10% VEGF positive endothelial cells. The highest percentage of cases with score 2 positivity in the stromal cells was observed in POKCs (68%); OOKCs showed a score 2 positivity in 44%, score 1 in 31% and score 0 in 25%, whereas 68% of FCs showed a score 0, 25% a score 1 and only 7% of cases showed a score 2. No statistically significant differences were observed between POKCs and OOKCs in VEGF expression in the epithelial and endothelial cells, whereas the positivity score in stromal cells was significantly higher in POKCs compared to OOKCs. The present results can support the hypothesis that angiogenesis is an active mechanism in the invasive growth of the OKC.

Osteoporosis influences the early period of the healing after distraction osteogenesis in a rat osteoporotic model

INTRODUCTION

Despite the clinical adoption of distraction osteogenesis (DO), studies examining the bone healing process at the distraction gap in osteoporotic bone are limited. We examined the effect of osteoporosis in the ovariectomized rat on DO.

MATERIAL AND METHODS

Mid-diaphyseal osteotomies were performed on the femurs of ovariectomized (OVX) rats. External distractors were placed on these rats and also on sham-ovariectomized rats. After a 7-day latency period, distraction was carried out at a rate of 0.5mm/day for 10 days. The bone volume (BV) of the distraction gap was measured by Micro-focused X-ray computed tomography (micro-CT) at 0, 2, and 4 weeks after completion of the distraction, and the distraction gap was examined histologically.

RESULTS

The BV of the distraction gap in the OVX group was significantly lower than that in the sham group at 2 and 4 weeks after completion of distraction (p<0.01). On histological examination, the distraction gap in the OVX group was filled with scattered smaller bone trabeculae than those seen in the sham group at 4 weeks after completion of distraction. Osteoclast numbers at the distraction gap in the OVX group were significantly increased when compared to the sham group (p<0.01).

CONCLUSION

Bone turnover with osteoclast predominance in ovariectomized rats is likely to be the cause of a reduction in new bone formation at the distraction gap.

Skeletal stem cells and bone regeneration: Translational strategies from bench to clinic

Clinical imperatives for new bone to replace or restore the function of traumatized or bone lost as a consequence of age or disease has led to the need for therapies or procedures to generate bone for skeletal applications. Tissue regeneration promises to deliver specifiable replacement tissues and the prospect of efficacious alternative therapies for orthopaedic applications such as non-union fractures, healing of critical sized segmental defects and regeneration of articular cartilage in degenerative joint diseases. In this paper we review the current understanding of the continuum of cell development from skeletal stem cells, osteoprogenitors through to mature osteoblasts and the role of the matrix microenvironment, vasculature and factors that control their fate and plasticity in skeletal regeneration. Critically, this review addresses in vitro and in vivo models to investigate laboratory and clinical based strategies for the development of new technologies for skeletal repair and the key translational points to clinical success. The application of developmental paradigms of musculoskeletal tissue formation specifically, understanding developmental biology of bone formation particularly in the adult context of injury and disease will, we propose, offer new insights into skeletal cell biology and tissue regeneration allowing for the critical integration of stem cell science, tissue engineering and clinical applications. Such interdisciplinary, iterative approaches will be critical in taking patient aspirations to clinical reality.

Mechanical characterization of external fixator stiffness for a rat femoral fracture model

Clinical and experimental studies have shown that several mechanical factors influence the fracture healing process. One such factor, interfragmentary movement, is affected by loading and the stiffness of the fixation device. This study evaluated the stiffness of different external fixation devices for a rat femoral fracture model, using in vitro and analytical methods. The contribution to the stiffness of the fixation construct was dominated by the flexibility of the pins in relation to their offset, diameter, and material properties. The axial stiffness increased with decreasing offset and increasing pin diameter. Titanium pins resulted in significantly lower axial stiffness compared to stainless steel pins of the same design. The fixator body material and fixator length had a less pronounced influence on fixation stiffness. Mechanically characterized external fixation devices will allow in vivo study of the fracture healing process utilizing pre-calculated fracture fixation stiffness. These characterized fixation devices will allow controlled manipulation of the axial and shear interfragmentary movement to achieve a flexible fixation resulting in callus formation compared to a more rigid fixation limiting callus formation in a rat femoral fracture model.

Stress fracture healing: fatigue loading of the rat ulna induces upregulation in expression of osteogenic and angiogenic genes that mimic the intramembranous portion of fracture repair

Woven bone is formed in response to fatigue-induced stress fractures and is associated with increased local angiogenesis. The molecular mechanisms that regulate this woven bone formation are unknown. Our objective was to measure the temporal and spatial expression of osteo- and angiogenic genes in woven bone formation in response to increasing levels of fatigue-induced damage. We used the rat forelimb compression model to produce four discrete levels of fatigue damage in the right ulna of 115 male Fischer rats. Rats were killed at 0 (1 h), 1, 3 and 7 days after loading. Using qRT-PCR, we quantified gene expression associated with osteogenesis (BMP2, Msx2, Runx2, Osx, BSP, Osc), cell proliferation (Hist4), and angiogenesis (VEGF, PECAM-1) from the central half of the ulna. The spatial distribution of BMP2, BSP and PCNA was assessed by immunohistochemistry or in situ hybridization in transverse histological sections 1, 4, and 7 mm distal to the ulnar mid-diaphysis. One hour after loading, BMP2 was significantly upregulated in neurovascular structures in the medial ulnar periosteum. Expression of angiogenic markers (VEGF, PECAM-1) increased significantly between Day 0 and 1 and, as with BMP2 expression, remained upregulated through Day 7. While Osx and BSP were upregulated on Day 1, the other osteogenic genes (Msx2, Runx2, Osx, BSP and Osc) were induced on Day 3 in association with the initiation of periosteal woven bone formation and continued through Day 7. The magnitude of osteogenic gene expression, particularly matrix genes (BSP, Osc) was significantly proportional the level of fatigue damage. The woven bone response to fatigue injury is remarkably similar to the "intramembranous" portion of fracture repair - rapid formation of periosteal woven bone characterized by early BMP2 expression, cell proliferation, and upregulation of osteogenic genes. We speculate that woven bone repair of fatigue damage may be an abbreviated fracture response without the requirement for endochondral repair. We conclude that bone fatigue repair is a process similar to intramembranous fracture repair characterized by increases in the expression of genes associated with angiogenesis, cell proliferation and osteoblastogenesis, and that the response from the local vasculature precedes the osteogenic response to fatigue loading.

Dual delivery of an angiogenic and an osteogenic growth factor for bone regeneration in a critical size defect model

This study investigated the effects of dual delivery of vascular endothelial growth factor (VEGF) and bone morphogenetic protein-2 (BMP-2) for bone regeneration in a rat cranial critical size defect. Four groups of scaffolds were generated with VEGF (12 microg), BMP-2 (2 mug), both VEGF (12 microg) and BMP-2 (2 microg), or no growth factor released from gelatin microparticles incorporated within the scaffold pores. These scaffolds were implanted within an 8 mm rat cranial critical size defect (n=8-9 for each group). At 4 and 12 weeks, implants were retrieved and evaluated by microcomputed tomography (microCT) and histological scoring analysis. Additionally, 4 week animals were perfused with a radiopaque material to visualize and quantify blood vessel formation. Histological analysis revealed that for all groups at 4 weeks, a majority of the porous scaffold volume was filled with vascularized fibrous tissue; however, bone formation appeared most abundant in the dual release group at this time. At 12 weeks, both dual release and BMP-2 groups showed large amounts of bone formation within the scaffold pores and along the outer surfaces of the scaffold; osteoid secretion and mineralization were apparent, and new bone was often in close or direct contact with the scaffold interface. MicroCT results showed no significant difference among groups for blood vessel formation at 4 weeks (<4% blood vessel volume); however, the dual release group showed significantly higher bone formation (16.1+/-9.2% bone volume) than other groups at this time. At 12 weeks, dual release and BMP-2 groups exhibited significantly higher bone formation (39.7+/-14.1% and 37.4+/-18.8% bone volume, respectively) than either the VEGF group or blank scaffolds (6.3+/-4.8% and 7.8+/-7.1% bone volume, respectively). This work indicates a synergistic effect of the dual delivery of VEGF and BMP-2 on bone formation at 4 weeks and suggests an interplay between these growth factors for early bone regeneration. For the doses investigated, the results show that the addition of VEGF does not affect the amount of bone formation achieved by BMP-2 at 12 weeks; however, they also indicate that delivery of both growth factors may enhance bone bridging and union of the critical size defect compared to delivery of BMP-2 alone.

Tissue engineering in cleft palate and other congenital malformations

Contributions from multidisciplinary investigations have focused attention on the potential of tissue engineering to yield novel therapeutics. Congenital malformations, including cleft palate, craniosynostosis, and craniofacial skeletal hypoplasias represent excellent targets for the implementation of tissue engineering applications secondary to the technically challenging nature and inherent inadequacies of current reconstructive interventions. Apropos to the search for answers to these clinical conundrums, studies have focused on elucidating the molecular signals driving the biologic activity of the aforementioned maladies. These investigations have highlighted multiple signaling pathways, including Wnt, fibroblast growth factor, transforming growth factor-beta, and bone morphogenetic proteins, that have been found to play critical roles in guided tissue development. Furthermore, a comprehensive knowledge of these pathways will be of utmost importance to the optimization of future cell-based tissue engineering strategies. The scope of this review encompasses a discussion of the molecular biology involved in the development of cleft palate and craniosynostosis. In addition, we include a discussion of craniofacial distraction osteogenesis and how its applied forces influence cell signaling to guide endogenous bone regeneration. Finally, this review discusses the future role of cell-based tissue engineering in the treatment of congenital malformations.

Uniaxial mechanical strain: an in vitro correlate to distraction osteogenesis

BACKGROUND

Distraction osteogenesis is a valuable clinical tool; however the molecular mechanisms governing successful distraction remain unknown. We have used a uniaxial in vitro strain device to simulate the uniaxial mechanical environment of the interfragmentary distraction gap.

MATERIALS AND METHODS

Using the Flexcell system, normal human osteoblasts were subjected to different levels of cyclical uniaxial mechanical strain. Cellular morphology, proliferation, migration, and the expression of angiogenic (vascular endothelial growth factor [VEGF] and fibroblast growth factor-2 [FGF-2]) and osteogenic (osteonectin, osteopontin, and osteocalcin) proteins and extracellular matrix molecules (collagen IalphaII) were analyzed in response to uniaxial cyclic strain.

RESULTS

Osteoblasts exposed to strain assumed a fusiform spindle-shaped morphology aligning parallel to the axis of uniaxial strain and osteoblasts exposed to strain or conditioned media had a 3-fold increase in proliferation. Osteoblast migration was maximal (5-fold) in response to 9% strain. Angiogenic cytokine, VEGF, and FGF-2, increased 32-fold and 2.6-fold (P < 0.05), respectively. Osteoblasts expressed greater amounts of osteonectin, osteopontin, and osteocalcin (2.1-fold, 1.8-fold, 1.5-fold respectively, P < 0.01) at lower levels of strain (3%). Bone morphogenic protein-2 production increased maximally at 9% strain (1.6-fold, P < 0.01). Collagen I expression increased 13-, 66-, and 153-fold in response to 3, 6, and 9% strain, respectively.

CONCLUSIONS

Uniaxial cyclic strain using the Flexcell device under appropriate strain parameters provides a novel in vitro model that induces osteoblast cellular and molecular expression patterns that simulate patterns observed in the in vivo distraction gap.

Nanostructured HA crystals up-regulate FGF-2 expression and activity in microvascular endothelium promoting angiogenesis

In mineralized tissue the process of angiogenesis is required for normal osteogenesis during bone repair and in reconstructive and substitutive surgery, for proper biomaterial/tissue integration. Nanotechnologies have been proposed to improve the compatibility of biomaterials for use in orthopaedic and reconstructive surgery (e.g., nanocrystals). The aim of this study was to determine the effect of nanostructured hydroxyapatite (HA) on angiogenesis. Microvascular endothelial cell survival, proliferation and migration, crucial events in the angiogenic process, were evaluated together with cytoskeleton and biochemical signalling markers. Induction of migration, metalloproteinase (MMP-2) and focal adhesion Kinase (FAK) activity documented the ability of HA nanocrystals to stimulate capillary endothelium toward an angiogenic phenotype. HA concentrations, ranging from 2 to 10 microg/ml, promoted endothelium survival and proliferation, preserved alphavbeta3-integrin localization, stimulated beta-actin reorganization and Akt phosphorylation (98% vs control). Immunoassays for key signalling pathways in angiogenesis (i.e., endothelial nitric oxide synthase (eNOS) and fibroblast growth factor-2 (FGF-2)) demonstrated that HA increased their expression. Moreover, quantitative RT-PCR and Western blotting analysis confirmed that HA nanocrystals exposure up-regulated FGF-2 mRNA by 6 fold and increased 18 kDa protein isoform by 40%. HA enhanced cell responsiveness to vascular endothelial growth factor (VEGF) in terms of NOS activity (1.5 fold over control), increasing the ability of microvascular endothelium to differentiate into capillary-like structures when grown in 3D fibrin gel. In conclusion our data document the proangiogenic properties of HA nanocrystals. This material stimulates endothelial cell functions and biochemical pathways to an extent similar to VEGF, and primes them to VEGF stimulation, leading to differentiation in pseudocapillary formations in 3D matrices.