Template synthesis of multifunctional nanotubes for controlled release

Magnetic nanomaterials mediate precise magnetic therapy

Magnetic nanoparticle (MNP)-mediated precision magnet therapy plays a crucial role in treating various diseases. This therapeutic strategy compensates for the limitations of low spatial resolution and low focusing of magnetic stimulation, and realizes the goal of wireless teletherapy with precise targeting of focal areas. This paper summarizes the preparation methods of magnetic nanomaterials, the properties of magnetic nanoparticles, the biological effects, and the measurement methods for detecting magnetism; discusses the research progress of precision magnetotherapy in the treatment of psychiatric disorders, neurological injuries, metabolic disorders, and bone-related disorders, and looks forward to the future development trend of precision magnet therapy.

Controlled Release of Amphoteric Surfactant from Mesoporous Nanosilica To Enhance Natural Gas Production at High Temperatures

Surfactants are widely used as foaming agents to remove liquid accumulation in gas wells, enhancing natural gas production. The surfactant used in traditional foam sticks was dissolved and released as foam in a short period, especially at elevated downhole temperatures. This often requires the addition of foam sticks to maintain foam. To solve this problem, this study studies the utilization of nano silica to incorporate the amphoteric surfactant, cocamidopropyl betaine (CAB), into the mesoporous structure of silica nanocomposite as foam sticks for controlled release of CAB. Mesoporous nano silica was prepared by a sol-gel acid-catalyzed process with a silica precursor. The formation of nanocomposite solid sticks containing the amphoteric surfactant was achieved by aging and drying. The composite was characterized by various techniques: infrared spectroscopy, thermogravimetric analysis, energy-dispersive spectrometry, scanning electron microscopy, transmission electron microscopy, and small-angle X-ray diffraction. Results showed that 49.3% of CAB was encapsulated within the mesoporous structure of 30-50 nm nano silica. CAB release over time in aqueous solution at 130 °C exhibited 10.1% surfactant left in the nanocomposite after 72 h, as determined by thermal analysis. Surfactant release was systematically evaluated through foam performance tests. The study revealed that CAB could be control-released over 168 h via CAB diffusion from mesoporous silica. This study provides a longer-lasting foam method to enhance gas production by utilizing mesoporous silica as a control release medium for gas well deliquification.

Prospects and hazards of silica nanoparticles: Biological impacts and implicated mechanisms

With the thrive of nanotechnology, silica nanoparticles (SiNPs) have been extensively adopted in the agriculture, food, cosmetic, and even biomedical industries. Due to the mass production and use, SiNPs inevitably entered the environment, resulting in ecological toxicity and even posing a threat to human health. Although considerable investigations have been conducted to assess the toxicity of SiNPs, the correlation between SiNPs exposure and consequent health risks remains ambiguous. Since the biological impacts of SiNPs can differ from their design and application, the toxicity assessment for SiNPs may be extremely difficult. This review discussed the application of SiNPs in different fields, especially their biomedical use, and documented their potential release pathways into the environment. Meanwhile, the current process of assessing SiNPs-related toxicity on various model organisms and cell lines was also detailed, thus estimating the health threats posed by SiNPs exposure. Finally, the potential toxic mechanisms of SiNPs were also elaborated based on results obtained from both in vivo and in vitro trials. This review generally summarizes the biological effects of SiNPs, which will build up a comprehensive perspective of the application and toxicity of SiNPs.

An update of nano-based drug delivery systems for cannabinoids: Biopharmaceutical aspects & therapeutic applications

Nanotechnology has been widely used to improve stability, efficacy, release control and biopharmaceutical aspects of natural and synthetic cannabinoids. In this review, the main types of cannabinoid-based nanoparticles (NPs) reported so far are addressed, taking into account the advantages and disadvantages of each system. Formulation, preclinical and clinical studies performed with colloidal carriers were individually analyzed. Lipid-based nanocarriers have been recognized for their high biocompatibility and ability to improve both solubility and bioavailability. Δ⁹-tetrahydrocannabinol-loaded lipid systems designed to treat glaucoma, for example, showed superior in vivo efficacy in comparison to market formulations. The analyzed studies have shown that product performance can be modulated by varying particle size and composition. In the case of self-nano-emulsifying drug delivery systems, the reduced particle size shortens the time to reach high plasma concentrations while the incorporation of metabolism inhibitors extends the plasma circulation time. The use of long alkyl chain lipids in NP formulations, in turn, is strategized to achieve intestinal lymphatic absorption. Polymer NPs have been prioritized when a sustained or site-specific cannabinoid release is desirable (e.g., CNS-affecting diseases/cancer). The functionalization of the surface of polymer NPs makes their action even more selective whereas surface charge modulation is highlighted to provide mucoadhesion. The present study identified promising systems for targeted applications, making the process of optimizing new formulations more effective and faster. Although NPs have shown a promising role in the treatment of several difficult-to-treat diseases, more translational studies should be performed to confirm the benefits reported here.

Silica-based Nanoparticles for Enzyme Immobilization and Delivery

Enzymes play an indispensable role in biosystems, catalyzing a variety of chemical and biochemical reactions with exceptionally high efficiency and selectivity. These features render them uniquely positioned in developing novel catalytic systems and therapeutics. However, their practical application is largely hindered by the vulnerability, low reusability and the inability to overcome the biological barriers of enzymes. Silica-based nanoparticles (SNPs) are a classic family of nanomaterials with tunable physicochemical properties, making them ideal candidates to address the intrinsic shortcomings of natural enzymes. SNPs not only improve the activity and durability of enzymes, but also provide precise spatiotemporal control over their intracellular as well as systemic biodistributions for boosting the catalytic outcome. Herein, the recent progress in SNPs for enzyme immobilization and delivery is summarized. The therapeutic applications, including cancer therapy and bacterial inhibition, are particularly highlighted. Our perspectives in this field, including current challenges and possible future research directions are also provided.

Advances in Magnetic Nanoparticles Engineering for Biomedical Applications-A Review

Magnetic iron oxide nanoparticles (MNPs) have been developed and applied for a broad range of biomedical applications, such as diagnostic imaging, magnetic fluid hyperthermia, targeted drug delivery, gene therapy and tissue repair. As one key element, reproducible synthesis routes of MNPs are capable of controlling and adjusting structure, size, shape and magnetic properties are mandatory. In this review, we discuss advanced methods for engineering and utilizing MNPs, such as continuous synthesis approaches using microtechnologies and the biosynthesis of magnetosomes, biotechnological synthesized iron oxide nanoparticles from bacteria. We compare the technologies and resulting MNPs with conventional synthetic routes. Prominent biomedical applications of the MNPs such as diagnostic imaging, magnetic fluid hyperthermia, targeted drug delivery and magnetic actuation in micro/nanorobots will be presented.

Shape Anisotropic Iron Oxide-Based Magnetic Nanoparticles: Synthesis and Biomedical Applications

Research on iron oxide-based magnetic nanoparticles and their clinical use has been, so far, mainly focused on the spherical shape. However, efforts have been made to develop synthetic routes that produce different anisotropic shapes not only in magnetite nanoparticles, but also in other ferrites, as their magnetic behavior and biological activity can be improved by controlling the shape. Ferrite nanoparticles show several properties that arise from finite-size and surface effects, like high magnetization and superparamagnetism, which make them interesting for use in nanomedicine. Herein, we show recent developments on the synthesis of anisotropic ferrite nanoparticles and the importance of shape-dependent properties for biomedical applications, such as magnetic drug delivery, magnetic hyperthermia and magnetic resonance imaging. A brief discussion on toxicity of iron oxide nanoparticles is also included.

Multifunctional Nanoparticles in Precise Cancer Treatment: Considerations in Design and Functionalization of Nanocarriers

Nanotechnology has revolutionized cancer treatment in both diagnosis and therapy. Since the initial application of nanoparticles (NPs) in cancer treatment, the main objective of nanotechnology was developing effective nanosystems with high selectivity and specificity for cancer treatment and diagnosis. To achieve this, different encapsulation and conjugation strategies along with surface functionalization techniques have been developed to synthesize anticancer drugs loaded NPs with effective targeting to specific tumor cells. The unique physicochemical attributes of NPs make them promising candidates for targeted drug delivery, localized therapies, sensing, and targeting at cellular levels. However, a nanosystem for localized and targeted cancer managements should overcome several biological barriers and biomedical challenges such as endothelial barriers, blood brain barrier, reticuloendothelial system, selective targeting, biocompatibility, acute/chronic toxicity, tumor-targeting efficacy. The NPs for in vivo applications encounter barriers at system, organ, and the cellular level. To overcome these barriers, different strategies during the synthesis and functionalization of NPs should be adapted. Pharmacokinetics and cellular uptake of NPs are largely associated with physicochemical attributes of NPs, morphology, hydrodynamic size, charge, and other surface properties. These properties can be adjusted during different phases of synthesis and functionalization of the NPs. This study reviews the advances in targeted cancer treatment and the parameters influencing the efficacies of NPs as therapeutics. Different strategies for overcoming the biological barriers at cellular, organ and system levels and biomedical challenges are discussed. Moreover, the applications of NPs in preclinical and clinical practice are reviewed.

Paclitaxel Encapsulation into Dual-Functionalized Multi-Walled Carbon Nanotubes

This work reports the synthesis of multi-walled carbon nanotubes (CNTs) from xylene/ferrocene using catalytic chemical vapor deposition technique. Following characterization using transmission electron microscopy (TEM), energy-dispersive X-ray (EDX), and Raman spectroscopy, CNT surface was dual-functionalized using ethylenediamine and phenylboronic acid groups. Average diameter of CNTs was calculated to be 16.5 nm. EDX spectra confirmed the existence of carbonaceous deposits on the tube's surface. Scattered electron diffraction and X-ray peak broadening calculations showed consistent inter-planer distance of the grown CNTs. Chemical functionalization, confirmed from FT-IR and Raman spectra, showed an enhanced dispersibility of CNTs in water. We describe the changes in the first- and second-order regions of the Raman spectra following the encapsulation of an anti-cancer drug, paclitaxel (PLX), into the free volume of functionalized CNTs. High PLX loading, achieved through its non-covalent π-π stacking within the CNT interior, is confirmed through the blue-shifted, softened G band in the Raman spectrum. While not addressed here, we will exploit this dual functionalization tactic to elaborate the relative role of attached moieties in the affinity interaction of CNTs with extra-cellular sialic acid, a biological target showing metastatic stage-dependent over-expression in colon cancer cells.

Protein Amyloid Fibrils as Template for the Synthesis of Silica Nanofibers, and Their Use to Prepare Superhydrophobic, Lotus-Like Surfaces

In this work, amyloid fibrils are used as a template for the preparation of long silica fibers, with a variety of aspect ratios and surface roughness. Starting with β-lactoglobulin fibrils with typical diameters of about 20 nm and a length of several micrometers, two different strategies are followed to grow silica: either in water at acidic pH values, or in ethanol-water mixtures under Stöber conditions and an excellent control of both the thickness and the roughness of the silica layer has been achieved. Silica nanofibers with a thickness ranging from a few nanometers to hundreds of nanometers are prepared. As an application, the rough silica nanotubes are used to create superhydrophobic surfaces by mimicking the structure of the lotus leaf. The papillary structure of the lotus leaf is replicated by depositing 10 μm colloidal particles in either a single colloidal crystal, or in a binary colloidal crystal made with smaller sub-micrometer particles. Then, silica nanofibers are deposited on the binary colloidal crystal surfaces through a layer-by-layer deposition procedure to replicate the nanoscale roughness provided by wax nanotubes. Upon hydrophobization of the silica nanotubes, the final surfaces are highly superhydrophobic, with a water contact angle of 165.5°.

Stepwise inhibition of T cell recruitment at post-capillary venules by orally active desulfated heparins in inflammatory arthritis

Identification of the structure-function relationship of heparin, particularly between 2-O-, 6-O-, and N-sulfation and its anticoagulant or anti-inflammatory activities, is critical in order to evaluate the biological effects of heparin, especially in conjunction with modifications for oral formulation. In this study, we demonstrated that removal of 2-O, 6-O, or N-desulfation and their hydrophobic modifications have differential effects on the blocking of interactions between sLe^X and P-and L-selectins, with highest inhibition by 6-O desulfation, which was consistent with their in vivo therapeutic efficacies on CIA mice. The 6-O desulfation of lower molecular weight heparin (LMWH) retained the ability of LMWH to interfere with T cell adhesion via selectin-sLe^X interactions. Furthermore, 6DSHbD coated on the apical surface of inflamed endothelium directly blocked the adhesive interactions of circulating T cells, which was confirmed in vivo by suppressing T cell adhesion at post-capillary venular endothelium. Thus, in series with our previous study demonstrating inhibition of transendothelial migration, oral delivery of low anticoagulant LMWH to venular endothelium of inflamed joint tissues ameliorated arthritis by the stepwise inhibition of T cell recruitment and provides a rationale for the development of modified oral heparins as innovative agents for the treatment of chronic inflammatory arthritis.

Recent advances on smart TiO2 nanotube platforms for sustainable drug delivery applications

To address the limitations of traditional drug delivery, TiO2 nanotubes (TNTs) are recognized as a promising material for localized drug delivery systems. With regard to the excellent biocompatibility and physicochemical properties, TNTs prepared by a facile electrochemical anodizing process have been used to fabricate new drug-releasing implants for localized drug delivery. This review discusses the development of TNTs applied in localized drug delivery systems, focusing on several approaches to control drug release, including the regulation of the dimensions of TNTs, modification of internal chemical characteristics, adjusting pore openings by biopolymer coatings, and employing polymeric micelles as drug nanocarriers. Furthermore, rational strategies on external conditions-triggered stimuli-responsive drug release for localized drug delivery systems are highlighted. Finally, the review concludes with the recent advances on TNTs for controlled drug delivery and corresponding prospects in the future.

Synthesis Mechanism and Thermal Optimization of an Economical Mesoporous Material Using Silica: Implications for the Effective Removal or Delivery of Ibuprofen

Mesoporous silica materials (MSMs) were synthesized economically using silica (SiO2) as a precursor via a modified alkaline fusion method. The MSM prepared at 500°C (MSM-500) had the highest surface area, pore size, and volume, and the results of isotherms and the kinetics of ibuprofen (IBP) removal indicated that MSM-500 had the highest sorption capacity and fastest removal speed vs. SBA-15 and zeolite. Compared with commercial granular activated carbon (GAC), MSM-500 had a ~100 times higher sorption rate at neutral pH. IBP uptake by MSM-500 was thermodynamically favorable at room temperature, which was interpreted as indicating relatively weak bonding because the entropy (∆adsS, -0.07 J mol(-1) K(-1)) was much smaller. Five times recycling tests revealed that MSM-500 had 83-87% recovery efficiencies and slower uptake speeds due to slight deformation of the outer pore structure. In the IBP delivery test, MSM-500 drug loading was 41%, higher than the reported value of SBA-15 (31%). The in vitro release of IBP was faster, almost 100%, reaching equilibrium within a few hours, indicating its effective loading and unloading characteristics. A cost analysis study revealed that the MSM was ~10-70 times cheaper than any other mesoporous silica material for the removal or delivery of IBP.

Universal Method to Transfer Membrane-Templated Nano-Objects to Aqueous Solutions

A wide range of nano-objects are synthesized by combining template synthesis, using polycarbonate membrane as template, with different material deposition methods. The resulting nanostructures varied from robust inorganic gold nanowires grown by electrodeposition to rigid polypyrrole nanotubes synthesized by chemical polymerization and softer nanotubes made of different combinations of synthetic and natural polyelectrolytes fabricated by layer-by-layer (LbL) assembly. The morphology of these various nano-objects is characterized prior to and after their immersion in water, revealing that the rigidity degree of LbL nanotubes strongly decreases after being in contact with water, leading to highly swollen and flexible nanotubes in aqueous solution that tend to stick to any surface and are very difficult to collect and disperse quantitatively in aqueous solution. Different processes to collect these nano-objects and disperse them in aqueous medium for further analysis and application were then studied. Among them, a method based on simple filtration of nanotubes in the presence of a powdered dextran adjuvant leads to the quantitative collection and dispersion in water of all types of tested cylindrical nano-objects. This universal method to efficiently collect membrane templated nano-objects paves the way to further characterization of a large variety of nanotubes in aqueous solution and to their potential use as cargo nanocarriers or as nanoreactors.

Self-rolled nanotubes with controlled hollow interiors by patterned grafts

By patterning surface grafts, we propose a simple and systematic method to form tubular structures for which two-dimensional grafted sheets are programmed to self-roll into hollow tubes with a desired size of the internal cavity. The repeating pattern of grafts utilizing defect sites causes anisotropy in the surface-grafted nanosheet, which spontaneously transforms into a curved secondary architecture and, thus, becomes a potential tool with which to form and control the curvature of nanotubes. In fact, the degree and the type of graft defect allow control of the internal cavity size and shape of the resulting nanotubes. By performing dissipative particle dynamics simulations on coarse-grained sheets, we found that the inner cavity size is inversely proportional to the graft-defect density, the difference in the graft densities between the two surface sides of the layer, regardless of whether the defects are patterned or random. While a random distribution of defects gives rise to a non-uniform local curvature and often leads to twisted tubes, regular patterns of graft defects ensure uniform local curvature throughout the sheet, which is important to generate monodisperse nanotubes. At a low graft-defect density, the sheet-to-tube transformation is governed by the layer anisotropy, which induces spontaneous scrolling along the long edge of the sheet, resulting in short tubes. Thus, the curve formation rate and the cavity diameter are independent of the pattern of the graft defects. At a high graft-defect density, however, the scroll direction owing to the graft pattern may conflict with that due to the layer anisotropy. To produce monodisperse nanotubes, two factors are important: (1) a graft-defect pattern parallel to the short edge of the layer, and (2) a graft-defect area wider than half of the graft coil length.

Angular first-order reversal curves: an advanced method to extract magnetization reversal mechanisms and quantify magnetostatic interactions

The magnetic properties of ordered hexagonal arrays of Co nanowires (NWs) and nanotubes (NTs) with diameters of 50 nm and interwire/tube distances of 105 nm were studied using first-order reversal curves (FORCs). We report an advanced analysis of angle dependent first-order reversal curves (AFORCs), measured by changing the angle of the applied magnetic field from θ = 0° (parallel to the wire/tube axis) to 90° (perpendicular). This method allowed us to determine the magnetization reversal mode and to retrieve quantitative information on the magnetostatic interactions between NWs and between NTs. In particular, we found a sharp increase in the coercivity distribution of the NT arrays for θ > 70°, which is attributed to a transition between vortex and transverse reversal modes. Local magnetic interactions are found to prevail in the Co NT arrays, steadily increasing from θ = 0° to 90°. However, in the Co NW arrays the mean magnetic interactions decrease as θ increases, going from ones similar to local interactions to ones smaller than them.

Nonporous Silica Nanoparticles for Nanomedicine Application

Nanomedicine, the use of nanotechnology for biomedical applications, has potential to change the landscape of the diagnosis and therapy of many diseases. In the past several decades, the advancement in nanotechnology and material science has resulted in a large number of organic and inorganic nanomedicine platforms. Silica nanoparticles (NPs), which exhibit many unique properties, offer a promising drug delivery platform to realize the potential of nanomedicine. Mesoporous silica NPs have been extensively reviewed previously. Here we review the current state of the development and application of nonporous silica NPs for drug delivery and molecular imaging.

Surface graft configuration dependency of the morphologies of heterosurface sheet polymers

Using dissipative particle dynamics, we investigated the graft configuration-dependent scroll formation of sheet polymers and their morphologies. Two types of coarse-grained graft disorder models were considered at various displaced tether fractions. Although tether coils were identical, sheet anisotropy arose from discrepancies in graft configurations on the two opposite-side surfaces and resulted in spontaneous scroll formation. An anisotropy parameter based on the relative free volumes of tether coils was introduced and shown to be linearly related to the radius of gyration. This demonstrates that sheet anisotropy, and consequently internal cavity diameters of tubular scrolls, can be regulated by surface grafting. We also examined a coassembly of laterally grafted rod-coil amphiphiles as an alternative way to form sheet polymers with heterosurfaces. The coassembly of conformation mismatching rod-coil molecules is expected to form anisotropic bilayers, as each layer is assembled independently with different degrees of graft disorder. We believe this work provides a framework for further research regarding morphology control by surface grafts of sheet polymers.

pH sensitive silica nanotubes as rationally designed vehicles for NSAIDs delivery

A novel pH-sensitive drug delivery system based on functionalized silica nanotubes was developed for the incorporation of non-steroidal anti-inflammatory drugs (NSAIDs), aimed at a tailored drug release in acidic conditions characteristic of inflamed tissues. Silica nanotubes (SNTs) were synthesized by a nanoporous alumina template assisted sol-gel method. Inner surfaces were physically and chemically modified to improve both the functionalization and subsequent incorporation of the drug. Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and transmission electron microscopy (TEM) were used to characterize the designed nanocarriers and their functionalization. To achieve the highest degree of functionalization, three types of aminosilanes were tested and calcination conditions were optimized. APTES was shown to be the most effective aminosilane regarding the functionalization of the SNTs' inner surface and an adequate calcination temperature (220°C) was found to attain mechanical stability without compromising functionalization efficiency. Finally, the incorporation of naproxen into the nanotubes was accessed by fluorescence measurements and drug release studies were performed, revealing that the electrostatic linkage ensures effective release of the drug in the acidic pH typical of inflamed cells, while maintaining the SNT-drug conjugates stable at the typical bloodstream pH.

Nanodetoxification: emerging role of nanomaterials in drug intoxication treatment

Treatment for intoxication involves the neutralization or clearance of a toxic compound, but the current methods of treatment are limited in their ability to safely and effectively detoxify the patient. Emerging research has focused on using nanoparticles as parenteral detoxifying agents to circulate through the body and capture toxins. The variable compositions of these nanoparticles control the mechanism in which they capture and remove specific compounds. As discussed in this article, the recent methods for utilizing nanoparticles for detoxification show great potential for intoxication treatment. However, several challenges must be overcome before a universal nanoparticle detoxification method is available for clinical use.

Novel approaches for drug delivery systems in nanomedicine: effects of particle design and shape

The identification of novel drug candidates for the treatment of diseases like cancer, infectious diseases, or allergies (especially asthma) assigns new tasks for pharmaceutical technology. With respect to drug delivery several problems occur such as low solubility and hence low bioavailability or restriction to inconvenient routes of administration. Nanotechnological approaches promise to circumvent some of these problems, therefore being well suited for future applications as nanomedicines. Furthermore, efficient and sufficient loading is a critical issue that is approached through mesoporous particles and/or through nonspherical particles both offering larger volumes and surfaces. Special interest is laid on the effect of shape of particulate materials on the body and related physiological mechanisms. The modified response of biological systems on different shapes opens a new dimension to adjust particle system interaction. Finally, the biological response to these systems will determine the fate with respect to their therapeutic value. Therefore, the interaction pattern between nonspherical particulate materials and biological systems as well as the production processes are highlighted.

Gram-scale synthesis of silica nanotubes with controlled aspect ratios by templating of nickel-hydrazine complex nanorods

We have developed a robust method for the synthesis of silica nanotubes with controlled aspect ratios on a large scale by templating against rod-like nanocrystals. Crystalline nanorods of a nickel-hydrazine complex are first formed in reverse micelles by surfactant capping on side facets, and subsequent silica coating and selective etching give rise to silica nanotubes of high uniformity and yield. The length of the silica nanotubes is tunable in the range 37-340 nm and can reach as long as micrometers. Control of the length is conveniently achieved by tuning the hydrazine/nickel ratio, which affects the growth kinetics of the nanocrystal templates. The inner diameter of the silica nanotubes can be adjusted in the range 10-20 nm by choosing different surfactants. This method is unique in utilizing reverse micelles as discrete nanoscale reactors for the growth of nanocrystals, allowing for precise control of the features of the nanotubes and opening up new opportunities in the synthesis of novel anisotropic nanomaterials, construction of nanodevices, and potential drug delivery applications.

Magnetic carbon nanotubes with particle-free surfaces and high drug loading capacity

Open-ended, multi-wall carbon nanotubes (CNTs) with magnetic nanoparticles encapsulated within their graphitic walls (magCNTs) were fabricated by a combined action of templated growth and a ferrofluid catalyst/carbon precursor, and tested as drug hosts. The hybrid nanotubes are stable under extreme pH conditions due to particle protection provided by the graphitic shell. The magCNTs are promising for high capacity drug loading given that the magnetic functionalization did not block any of the active sites available for drug attachment, either from the CNT internal void or on the internal and external surfaces. This is in contrast to typical approaches of loading CNTs with particles that proceed through surface attachment or capillary filling of the tube interior. Additionally, the CNTs exhibit enhanced hydrophilic character, as shown by water adsorption measurements, which make them suitable for biological applications. The morphological and structural characteristics of the hybrid CNTs are evaluated in conjunction to their magnetic properties and ability for drug loading (diaminophenothiazine). The fact that the magnetic functionality is provided from 'inside the walls' can allow for multimode functionalization of the graphitic surfaces and makes the magCNTs promising for targeted therapeutic applications.

Impact of silica nanoparticle design on cellular toxicity and hemolytic activity

Understanding the toxicity of silica nanoparticles (SiO(2)) on the cellular level is crucial for rational design of these nanomaterials for biomedical applications. Herein, we explore the impacts of geometry, porosity, and surface charge of SiO(2) on cellular toxicity and hemolytic activity. Nonporous Stöber silica nanospheres (115 nm diameter), mesoporous silica nanospheres (120 nm diameter, aspect ratio 1), mesoporous silica nanorods with aspect ratio of 2, 4, and 8 (width by length 80 × 200 nm, 150 × 600 nm, 130 × 1000 nm), and their cationic counterparts were evaluated on macrophages, lung carcinoma cells, and human erythrocytes. It was shown that the toxicity of SiO(2) is cell-type dependent and that surface charge and pore size govern cellular toxicity. Using inductively coupled plasma mass spectrometry, the cellular association of SiO(2) was quantitated with the association amount increasing in the following order: mesoporous SiO(2) (aspect ratio 1, 2, 4, 8) < amine-modified mesoporous SiO(2) (aspect ratio 1, 2, 4, 8) < amine-modified nonporous Stöber SiO(2) < nonporous Stöber SiO(2). Geometry did not seem to influence the extent of SiO(2) association at early or extended time points. The level of cellular association of the nanoparticles was directly linked to the extent of plasma membrane damage, suggesting a biological cause-and-effect relationship. Hemolysis assay showed that the hemolytic activity was porosity- and geometry-dependent for bare SiO(2) and surface-charge-dependent for amine-modified SiO(2). A good correlation between hemolytic activity and cellular association was found on a similar dosage basis. These results can provide useful guidelines for the rational design of SiO(2) in nanomedicine.

Experimental considerations on the cytotoxicity of nanoparticles

Engineered nanoparticles are one of the leading nanomaterials currently under investigation due to their applicability in various fields, including drug and gene delivery, biosensors, cancer treatment and diagnostic tools. Moreover, the number of commercial products containing nanoparticles released on the market is rapidly increasing. Nanoparticles are already widely distributed in air, cosmetics, medicines and even in food. Therefore, the unintended adverse effect of nanoparticle exposure is a growing concern both academically and socially. In this context, the toxicity of nanoparticles has been extensively studied; however, several challenges are encountered due to the lack of standardized protocols. In order to improve the experimental conditions of nanoparticle toxicity studies, serious consideration is critical to obtain reliable and realistic data. The cell type must be selected considering the introduction route and target organ of the nanoparticle. In addition, the nanoparticle dose must reflect the realistic concentration of nanoparticles and must be loaded as a well-dispersed form to observe the accurate size- and shape-dependent effect. In deciding the cytotoxicity assay method, it is important to choose the appropriate method that could measure the toxicity of interest without the false-negative or -positive misinterpretation of the toxicity result.

Identifying the pulmonary hazard of high aspect ratio nanoparticles to enable their safety-by-design

High aspect ratio, or fiber-shaped, nanoparticles (HARNs) represent a growth area in nanotechnology as their useful properties become more apparent. Carbon nanotubes, the best known and studied of the HARNs are handled on an increasingly large scale, with subsequent potential for human inhalation exposure. Their resemblance to asbestos fibers precipitated fears that they might show the same type of pathology as that caused by asbestos and there is emerging evidence to support this possibility. The large number of other HARNs, including nanorods, nanowires and other nanofibers, require similar toxicological scrutiny. In this article we describe the unusual hazard associated with fibers, with special reference to asbestos, and address the features of fibers that dictate their pathogenicity as developed in the fiber pathogenicity paradigm. This paradigm is a robust structure:toxicity model that identifies thin, long, biopersistent fibers as the effective dose for fiber-type pathogenic effects. It is likely that HARNs will in general conform to the paradigm and such an understanding of the features that make fibers pathogenic should enable us to design safer HARNs.

Carbon Nanotubes Filled with Ferromagnetic Materials

Carbon nanotubes (CNT) filled with ferromagnetic metals like iron, cobalt or nickel are new and very interesting nanostructured materials with a number of unique properties. In this paper we give an overview about different chemical vapor deposition (CVD) methods for their synthesis and discuss the influence of selected growth parameters. In addition we evaluate possible growth mechanisms involved in their formation. Moreover we show their identified structural and magnetic properties. On the basis of these properties we present different application possibilities. Some selected examples reveal the high potential of these materials in the field of medicine and nanotechnology.

Covalently linked DNA nanotubes

The present study introduces an approach to prepare covalently linked DNA nanotubes. A circular DNA that includes at its opposite poles thiol and amine functionalities acts as the building block for the construction of the DNA nanotubes. The circular DNA is cross-linked with a bis-amide-modified nucleic acid to yield DNA nanowires, and these are subsequently cross-linked by a bis-thiolated nucleic acid to yield the DNA nanotubes. Alternatively, a circular DNA that includes four amine functionalities on its poles is cross-linked in one-step by the bis-thiolated nucleic acid to yield the nanotubes. The resulting nanostructures are stable and nonseparable upon heating.