A review on photochemical, biochemical and electrochemical transformation of CO2 into value-added products

The biotechnological potential of the Chloroflexota phylum

In the next decades, the increasing material and energetic demand to support population growth and higher standards of living will amplify the current pressures on ecosystems and will call for greater investments in infrastructures and modern technologies. A valid approach to overcome such future challenges is the employment of sustainable bio-based technologies that explore the metabolic richness of microorganisms. Collectively, the metabolic capabilities of Chloroflexota, spanning aerobic and anaerobic conditions, thermophilic adaptability, anoxygenic photosynthesis, and utilization of toxic compounds as electron acceptors, underscore the phylum's resilience and ecological significance. These diverse metabolic strategies, driven by the interplay between temperature, oxygen availability, and energy metabolism, exemplify the complex adaptations that enabled Chloroflexota to colonize a wide range of ecological niches. In demonstrating the metabolic richness of the Chloroflexota phylum, specific members exemplify the diverse capabilities of these microorganisms: Chloroflexus aurantiacus showcases adaptability through its thermophilic and phototrophic growth, whereas members of the Anaerolineae class are known for their role in the degradation of complex organic compounds, contributing significantly to the carbon cycle in anaerobic environments, highlighting the phylum's potential for biotechnological exploitation in varying environmental conditions. In this context, the metabolic diversity of Chloroflexota must be considered a promising asset for a large range of applications. Currently, this bacterial phylum is organized into eight classes possessing different metabolic strategies to survive and thrive in a wide variety of extreme environments. This review correlates the ecological role of Chloroflexota in such environments with the potential application of their metabolisms in biotechnological approaches.

Regulation on C2-C8 carboxylic acid biosynthesis from anaerobic CO2 fermentation

Bioconversion of CO2 into liquid fuels or chemicals, preferred medium chain carboxylic acids (caproic and caprylic acid), is an attractive CO2 utilization technology. The present study aims to investigate the effects of different ratios of H2/CO2 on regulating the distribution of C2-C8 carboxylic acid products, while the headspace pressure of 1.5 bar was set to amplify the effect of different ratios. The H2/CO2 ratio of 4:1 was more suitable for preparing acetic acid, where the highest acetic acid yield was 17.5 g/L. And the H2/CO2 ratio of 2:1 showed excellent chain elongation ability with the highest n-caprylic yield of 2.4 g/L. Additionally, the actual H2/CO2 ratios of 4:1 reactors were higher than that in 2:1 may be course chain elongation often accompanied by H2 production. The 16S rRNA genes analysis shows that the genus Terrisporobacter and Coriobacteriales may be related to acetic acid production enriched in H2/CO2 ratio 4:1 reactors, and the genus Clostridium and Paenibacillaceae may associate with the chain elongation pathway were enriched in H2/CO2 ratio 2:1 reactors.

Modeling and experimental analysis of CO2 methanation reaction using Ni/CeO2 monolithic catalyst

In this study, the effect of the cell density of monolithic catalysts was investigated and further mathematically modeled on cordierite supports used in CO2 methanation. Commercial cordierite monoliths with 200, 400, and 500 cpsi cell densities were coated by immersion into an ethanolic suspension of Ni/CeO2 active phase. SEM-EDS analysis confirmed that, owing to the low porosity of cordierite (surface area < 1 m2 g-1), the Ni/CeO2 diffusion into the walls was limited, especially in the case of low and intermediate cell density monoliths; thus, active phase was predominantly loaded onto the channels' external surface. Nevertheless, despite the larger exposed surface area in the monolith with high cell density, which would allow for better distribution and accessibility of Ni/CeO2, its higher macro-pore volume resulted in some introduction of the active phase into the walls. As a result, the catalytic evaluation showed that it was more influenced by increments in volumetric flow rates. The low cell density monolith displayed diffusional control at flow rates below 500 mL min-1. In contrast, intermediate and high cell density monoliths presented this behavior up to 300 mL min-1. These findings suggest that the interaction reactants-catalyst is considerably more affected by a forced non-uniform flow when increasing the injection rate. This condition reduced the transport of reactants and products within the catalyst channels and, in turn, increased the minimum temperature required for the reaction. Moreover, a slight diminution of selectivity to CH4 was observed and ascribed to the possible formation of hot spots that activate the reverse water-gas shift reaction. Finally, a mathematical model based on fundamental momentum and mass transfer equations coupled with the kinetics of CO2 methanation was successfully derived and solved to analyze the fluid dynamics of the monolithic support. The results showed a radial profile with maximum fluid velocity located at the center of the channel. A reactive zone close to the inlet was obtained, and maximum methane production (4.5 mol m-3) throughout the monolith was attained at 350 °C. Then, linear streamlines of the chemical species were developed along the channel.

Biochar-Derived Persistent Free Radicals: A Plethora of Environmental Applications in a Light and Shadows Scenario

Biochar (BC) is a carbonaceous material obtained by pyrolysis at 200-1000 °C in the limited presence of O2 from different vegetable and animal biomass feedstocks. BC has demonstrated great potential, mainly in environmental applications, due to its high sorption ability and persistent free radicals (PFRs) content. These characteristics enable BC to carry out the direct and PFRs-mediated removal/degradation of environmental organic and inorganic contaminants. The types of PFRs that are possibly present in BC depend mainly on the pyrolysis temperature and the kind of pristine biomass. Since they can also cause ecological and human damage, a systematic evaluation of the environmental behavior, risks, or management techniques of BC-derived PFRs is urgent. PFRs generally consist of a mixture of carbon- and oxygen-centered radicals and of oxygenated carbon-centered radicals, depending on the pyrolytic conditions. Here, to promote the more productive and beneficial use of BC and the related PFRs and to stimulate further studies to make them environmentally safer and less hazardous to humans, we have first reviewed the most common methods used to produce BC, its main environmental applications, and the primary mechanisms by which BC remove xenobiotics, as well as the reported mechanisms for PFR formation in BC. Secondly, we have discussed the environmental migration and transformation of PFRs; we have reported the main PFR-mediated application of BC to degrade inorganic and organic pollutants, the potential correlated environmental risks, and the possible strategies to limit them.

Unraveling the role of internal-external metal substitution in Zn3[Co(CN6)]2 for the styrene oxide-CO2 cycloaddition reaction

We investigated the influence of the structural and textural properties along with the chemical environment of pure Zn3[Co(CN)6]2 in comparison with the modified phases on the catalytic performance in the cycloaddition reaction between styrene oxide and CO2. We relate these to the proposed reaction pathways and mechanisms. The natural cubic phase (ZnCoCn) was dehydrated to obtain the rhombohedral phase (ZnCoRn), while the stabilized cubic phase (ZnCoCs) was synthesized by substituting external zinc atoms with cadmium atoms. The rhombohedral stabilized phase (ZnCoRs) was achieved by the internal cobalt change with iron. All the materials were extensively characterized using X-ray diffraction (XRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray photoelectron spectroscopy (XPS), and N2 adsorption. The catalytic behavior of the four phases was tested. The crystalline structure of each phase was obtained, and by XPS, it was demonstrated that the chemical environments of all elements conforming to the rhombohedral stabilized phase are different from those of all other materials owing to the exchange of internal metals. The bulk textural properties were similar; only the ZnCoRs presented more micropore area but did not exceed the total surface area of the other materials. The product distribution and yield at reaction times of 2 h and 6 h were closer to those of the cubic phases. The natural rhombohedral phase exhibits the best performance. The tetrabutylammonium bromide (TBAB) and rhombohedral stabilized phase work together to yield a bigger copolymer quantity at the expense of the styrene carbonate (StCO3) production. From the proposed mechanism, the TBAB cation (TBA+) has a "protection" function that drives the closing of the StCO3 ring; however, the charge distribution anisotropy in the four nitrogen atoms generated by Co replacement in ZnCoRs could hold TBA+ as the reaction time progressed, causing an unavailability that triggered the copolymerization propagation step.

Stabilizing electron-rich Ni single-atoms on black phosphorus nanosheets boosts photocatalytic carbon dioxide reduction

The development of unique single-atom catalysts with electron-rich feature is essential to promoting the photocatalytic CO2 reduction, yet remains a big challenge. Here, a conceptionally new single-atom catalyst constructed from atomically dispersed Ni-P3 species on black phosphorus (BP) nanosheets (BP-Ni) is synthesized for realizing highly efficient visible-light-driven CO2 reduction when trapping photogenerated electrons from homogeneous light absorbers in the presence of triethanolamine as the sacrificial agent. Both the experimental and theoretical calculation data reveal that the Ni-P3 species on BP nanosheets own the electron-rich feature that can improve the photogenerated charge separation efficiency and lower the activation barrier of CO2 conversion. This unique feature makes BP-Ni exhibit the much higher activity as cocatalyst in the photocatalytic CO2 reduction than BP nanosheets. The BP-Ni can also be applied as a cocatalyst for enhanced photocatalytic CO2 reduction after combining with CdSe/S colloidal crystal photocatalyst. The present study offers valuable inspirations for the design and construction of effective catalytic sites toward photocatalytic CO2 reduction reactions.

Photoelectrocatalytic Utilization of CO2 : A Big Show of Si-based Photoelectrodes

CO2 is a greenhouse gas that contributes to environmental deterioration; however, it can also be utilized as an abundant C1 resource for the production of valuable chemicals. Solar-driven photoelectrocatalytic (PEC) CO2 utilization represents an advanced technology for the resourcing of CO2 . The key to achieving PEC CO2 utilization lies in high-performance semiconductor photoelectrodes. Si-based photoelectrodes have attracted increasing attention in the field of PEC CO2 utilization due to their suitable band gap (1.1 eV), high carrier mobility, low cost, and abundance on Earth. There are two pathways to PEC CO2 utilization using Si-based photoelectrodes: direct reduction of CO2 into small molecule fuels and chemicals, and fixation of CO2 with organic substrates to generate high-value chemicals. The efficiency and product selectivity of PEC CO2 utilization depends on the structures of the photoelectrodes as well as the composition, morphology, and size of the catalysts. In recent years, significant and influential progress has been made in utilizing Si-based photoelectrodes for PEC CO2 utilization. This review summarizes the latest research achievements in Si-based PEC CO2 utilization, with a particular emphasis on the mechanistic understanding of CO2 reduction and fixation, which will inspire future developments in this field.

CO2 conversion in a dielectric barrier discharge plasma by argon dilution over MgO/HKUST-1 catalyst using response surface methodology

Metal-organic frameworks (MOFs) as carbon dioxide adsorption in combination with metal oxides have shown catalyst application in CO2 conversion. Herein, the MgO/HKUST-1 catalyst is synthesized to direct conversion of CO2 upon dilution by argon in a cylindrical dielectric barrier discharge (DBD) reactor. A water-cooling circulation adjusts the reactor temperature, and aluminum powder is used as a high-voltage electrode. The effect of the discharge power, feed flow rate, CO2 fraction, and their interaction in plasma and plasma catalyst method on CO2 conversion (R1), effective CO2 conversion (R2), and energy efficiency (R3) is evaluated by central composite design (CCD) based on response surface methodology. The Analysis of Variance (ANOVA) results demonstrate that the quadratic regression model describes CO2 conversion and effective CO2 conversion, and the reduced cubic model describes energy efficiency. The results indicate that the method (plasma, plasma catalyst) and discharge power on R1 and R2 have a considerable effect. Also, the method and CO2 fraction on R3 have the greatest impact, respectively. In the plasma and plasma catalyst method maximum CO2 conversion is 12.3% and 20.5% at a feed flow rate of 80 ml/min, CO2 fraction of 50%, and discharge power of 74 W.

Formic acid stability in different solvents by DFT calculations

CONTEXT

New technologies have been developed toward the use of green energies. The production of formic acid (FA) from carbon dioxide (CO[Formula: see text]) hydrogenation with H[Formula: see text] is a sustainable process for H[Formula: see text] storage. However, the FA adduct stabilization is thermodynamically dependent on the type of solvent and thermodynamic conditions. The results suggest a wide range of dielectric permittivity values between the dimethyl sulfoxide (DMSO) and water solvents to stabilize the FA in the absence of base. The thermodynamics analysis and the infrared and charge density difference results show that the formation of the FA complex with H[Formula: see text]O is temperature dependent and has a major influence on aqueous solvents compared to the FA adduct with amine, in good agreement with the experiment. In these conditions, the stability thermodynamic of the FA molecule may be favorable at non-organic solvents and dielectric permittivity values closer to water. Therefore, a mixture of aqueous solvents with possible ionic composition could be used to increase the thermodynamic stability of H[Formula: see text] storage in CO[Formula: see text] conversion processes.

METHODS

Using the Quantum ESPRESSO package, density functional theory (DFT) calculations were performed with periodic boundary conditions, and the electronic wave functions were expanded in plane waves. For the exchange-correlation functional, we use the vdW-DF functional with the inclusion of van der Waals (vdW) forces. Electron-ion interactions are treated by the projector augmented wave (PAW) method with pseudopotentials available in the PSlibrary repository. The wave functions and the electronic densities were expanded employing accurate cut-off energies of 6.80[Formula: see text]10[Formula: see text] and 5.44[Formula: see text]10[Formula: see text] eV, respectively. The electronic density was computed from the wave functions calculated at the [Formula: see text]-point in the first Brillouin-zone. Each structural optimization was minimized according to the Broyden-Fletcher-Goldfarb-Shanno (BFGS) algorithm, with force and energy convergence criteria of 25 meV[Formula: see text]Å[Formula: see text] and 1.36 meV, respectively. The electrostatic solvation effects were performed by the [Formula: see text] package with the Self-Consistent Continuum Solvation (SCCS) approach.

Gas-induced controllable synthesis of the Cu(100) crystal facet for the selective electroreduction of CO2 to multicarbon products

Electrocatalytic CO2 reduction (ECR) to high value-added chemicals is an excellent method to attenuate the impact of greenhouse effect caused by CO2. At the same time, multicarbon products (C2+) get extensive attention in view of their relatively high energy density and market price. At present, Cu is an important metal electrocatalyst to convert CO2 into multicarbon products (e.g. ethylene, ethanol, and n-propanol); however, its poor selectivity impedes its practical application. It is well-known that the Cu(100) crystal facet can enhance the selectivity toward multicarbon products among different Cu crystal facets. Herein, the Cu nanoparticles were firstly prepared using the inductive effect of different gases (CO2, CO, Ar, N2, and air) during the Cu electrodeposition processes, in which the CO2-induced Cu catalyst (Cu-CO2) showed the largest normalized content of the Cu(100) crystal facet and the highest C2+ faradaic efficiency of 69% at a current density of 80 mA cm-2 in ECR. Subsequently, the different CO2 pressures during the Cu electrodepositions were studied to reveal the optimal CO2 pressure in the CO2-induced Cu synthesis for improved Cu(100) content as well as C2+ faradaic efficiency. Finally, density functional theory (DFT) calculations confirmed that CO2 molecules preferred to get adsorbed on the Cu(100) crystal facet, which resulted in not only the presence of dominant Cu(100) during the CO2-induced Cu synthesis but also the good electrocatalytic performance in ECR.

Cooperative small molecule activation by apolar and weakly polar bonds through the lens of a suitable computational protocol

Small molecule activation processes are central in chemical research and cooperativity is a valuable tool for the fine-tuning of the efficiency of these reactions. In this contribution, we discuss recent and remarkable examples in which activation processes are mediated by bimetallic compounds featuring apolar or weakly polar metal-metal bonds. Relevant experimental breakthroughs are thoroughly analyzed from a computational perspective. We highlight how the rational and non-trivial application of selected computational approaches not only allows rationalization of the observed reactivities but also inferring of general principles applicable to activation processes, such as the breakdown of the structure-reactivity relationship in carbon dioxide activation in a cooperative framework. We finally provide a simple yet unbiased computational protocol to study these reactions, which can support experimental advances aimed at expanding the range of applications of apolar and weakly polar bonds as catalysts for small molecule activation.

Dual Localized Surface Plasmon Resonance effect enhances Nb2AlC/Nb2C MXene thermally coupled photocatalytic reduction of CO2 hydrogenation activity

Nb2AlC/Nb2C MXene (NAC/NC) heterojunction photocatalysts with Schottky junctions were obtained by selective etching of the Al layer, resulting in 146.25 μmol·g-1 electrons and 15.28 μmol·g-1 holes stored in the heterojunction. The average conversion of NAC/NC thermally coupled photocatalytic reduction of CO2 under the simulated solar irradiation reached 110.15 μmol⋅g-1⋅h-1, and the CO selectivity reached over 92%, which was 1.49 and 1.74 times higher than that of pure Nb2AlC and Nb2C MXene, respectively. After light excitation, the localized surface plasmon resonance (LSPR) effect of holes distributed on the surface of Nb2C MXene crystals in the heterojunction will form high-energy thermal holes to dissociate H2 to H+ and reduce CO2 to form H2O at the same time. The high-energy electrons formed by the LSPR effect of Nb2C MXene and the conduction band electrons generated by the photoexcitation of Nb2C MXene can be migrated to Nb2AlC under the action of the interfacial Schottky junction to supplement the electrons needed for the LSPR effect of Nb2AlC, which continuously forms high-energy hot electrons to convert the adsorbed CO2 into *CO2-, b-HCO3, and HCOO. Subsequently, HCOO releases ⋅OH in a cyclic reaction to continuously reduce to form CO. The dual LSPR effect of Nb2AlC and Nb2C MXene is used to enhance the hydrogenation activity of thermally coupled photocatalytic reduction of CO2, which provides a new research idea for the application of MXene in thermally coupled photoreduction of CO2.

Rare Earth Metal Anchored into Nitrogen-Doped Graphene for CO2 Electrocatalytic Reduction to C1 Products

Single-atom catalysts (SACs) are attracting global attention due to their 100% atomic utilization rate and unique properties. Rare-earth-based SACs have shown great potential in the field of electrocatalysis in recent years. In this study, the catalytic performance of four rare earth metals (REMs) anchored into N-graphene for the CO2RR is systematically studied by density functional theory. The calculation results of formation energy show that all REM@N6-G compounds have favorable stability. In addition, the Gibbs free energy calculation results of all possible elementary reactions show that the *OCHO pathway is the optimal hydrogenation pathway for all catalysts, and they have the same potential determining step (*OCHO + e- + H+ → *HCOOH). Meanwhile, the products of the CO2RR on these catalysts are different, and the product on REM@N6-G (REM = La, Pr, and Nd) is CH4, while the product on Ce@N6-G is CH3OH. In particular, Nd@N6-G exhibits the best catalytic activity in this work, with a very low limiting potential of -0.38 V. These results may guide the development of rare-earth-based SACs for CO2RR.

Problems and corresponding strategies for converting CO2 into value-added products in Cupriavidus necator H16 cell factories

Elevated CO2 emissions have substantially altered the worldwide climate, while the excessive reliance on fossil fuels has exacerbated the energy crisis. Therefore, the conversion of CO2 into fuel, petroleum-based derivatives, drug precursors, and other value-added products is expected. Cupriavidus necator H16 is the model organism of the "Knallgas" bacterium and is considered to be a microbial cell factory as it can convert CO2 into various value-added products. However, the development and application of C. necator H16 cell factories has several limitations, including low efficiency, high cost, and safety concerns arising from the autotrophic metabolic characteristics of the strains. In this review, we first considered the autotrophic metabolic characteristics of C. necator H16, and then categorized and summarized the resulting problems. We also provided a detailed discussion of some corresponding strategies concerning metabolic engineering, trophic models, and cultivation mode. Finally, we provided several suggestions for improving and combining them. This review might help in the research and application of the conversion of CO2 into value-added products in C. necator H16 cell factories.

Mechanistic study on the formation of the alkyl acrylates from CO2, ethylene and alkyl iodides over nickel-based catalyst

The catalytic conversion of carbon dioxide (CO2) and olefins into acrylates has been a long standing target, because society attempts to synthesize commodity chemicals in a more economical and sustainable fashion. In this work, two alkylation reaction pathways were investigated to explore the role of methylene linkage (-CH2-) on the formation of alkyl acrylate from coupling of CO2 and ethylene, catalyzed by a nickel catalyst in the presence of different alkyl iodides. The energy barrier of Ni-O bond cleavage decreases with increasing methylene linkage of alkyl iodides, which may be due to NPA charge transfer of alkyl iodides. Meanwhile, the O1 (ester sp3 O atom) attack route leading to the formation of alkyl acrylate competes with the O2 (carboxylic sp2 O atom) attack route in terms of energy barriers. Further studies on the fluoro-substituted alkyl acrylates show that neither CF3I nor CF3CH2I is effective in releasing trifluoroalkyl acrylates from the nickellacycle, which explains why only negligible amounts of the desired product were detected in the experiment. In addition, we investigated the non-productive pathways leading to byproducts, such as propionic acid, propionates and ion pair complexes, etc. By comparing the results obtained with CH3I, the use of C2H5I as an electrophilic reagent may stabilize the non-productive intermediates. The methylene linkage has little effect on the main productive pathway. However, it has a significant influence on the side reactions, which is detrimental to the formation of alkyl acrylate in competing with the main productive pathway.

Theoretical Study of the Defects and Doping in Tuning the Electrocatalytic Activity of Graphene for CO2 Reduction

The application of graphene-based catalysts in the electrocatalytic CO2 reduction reaction (ECO2RR) for mitigating the greenhouse effect and energy shortage is a growing trend. The unique and extraordinary properties of graphene-based catalysts, such as low cost, high electrical conductivity, structural tunability, and environmental friendliness, have rendered them promising materials in this area. By doping heteroatoms or artificially inducing defects in graphene, its catalytic performance can be effectively improved. In this work, the mechanisms underlying the CO2 reduction reaction on 10 graphene-based catalysts were systematically studied. N/B/O-codoped graphene with a single-atom vacancy defect showed the best performance and substantial improvement in catalytic activity compared with pristine graphene. The specific roles of the doped elements, including B, N, and O, as well as the defects, are discussed in detail. By analysing the geometric and electronic structures of the catalysts, we showed how the doped heteroatoms and defects influence the catalytic reaction process and synergistically promoted the catalytic efficiency of graphene.

Nanoreactor Engineering Can Unlock New Possibilities for CO2 Tandem Catalytic Conversion to C-C Coupled Products

Climate change is becoming increasingly more pronounced every day while the amount of greenhouse gases in the atmosphere continues to rise. CO₂ reduction to valuable chemicals is an approach that has gathered substantial attention as a means to recycle these gases. Herein, some of the tandem catalysis approaches that can be used to achieve the transformation of CO₂ to C-C coupled products are explored, focusing especially on tandem catalytic schemes where there is a big opportunity to improve performance by designing effective catalytic nanoreactors. Recent reviews have highlighted the technical challenges and opportunities for advancing tandem catalysis, especially highlighting the need for elucidating structure-activity relationships and mechanisms of reaction through theoretical and in situ/operando characterization techniques. In this review, the focus is on nanoreactor synthesis strategies as a critical research direction, and discusses these in the context of two main tandem pathways (CO-mediated pathway and Methanol-mediated pathway) to C-C coupled products.

Advances in CO2 utilization employing anisotropic nanomaterials as catalysts: a review

Anisotropic nanomaterials are materials with structures and properties that vary depending on the direction in which they are measured. Unlike isotropic materials, which exhibit uniform physical properties in all directions, anisotropic materials have different mechanical, electrical, thermal, and optical properties in different directions. Examples of anisotropic nanomaterials include nanocubes, nanowires, nanorods, nanoprisms, nanostars, and so on. These materials have unique properties that make them useful in a variety of applications, such as electronics, energy storage, catalysis, and biomedical engineering. One of the key advantages of anisotropic nanomaterials is their high aspect ratio, which refers to the ratio of their length to their width, which can enhance their mechanical and electrical properties, making them suitable for use in nanocomposites and other nanoscale applications. However, the anisotropic nature of these materials also presents challenges in their synthesis and processing. For example, it can be difficult to align the nanostructures in a specific direction to impart modulation of a specific property. Despite these challenges, research into anisotropic nanomaterials continues to grow, and scientists are working to develop new synthesis methods and processing techniques to unlock their full potential. Utilization of carbon dioxide (CO₂) as a renewable and sustainable source of carbon has been a topic of increasing interest due to its impact on reducing the level of greenhouse gas emissions. Anisotropic nanomaterials have been used to improve the efficiency of CO₂ conversion into useful chemicals and fuels using a variety of processes such as photocatalysis, electrocatalysis, and thermocatalysis. More study is required to improve the usage of anisotropic nanomaterials for CO₂ consumption and to scale up these technologies for industrial use. The unique properties of anisotropic nanomaterials, such as their high surface area, tunable morphology, and high activity, make them promising catalysts for CO₂ utilization. This review article discusses briefly about various approaches towards the synthesis of anisotropic nanomaterials and their applications in CO₂ utilization. The article also highlights the challenges and opportunities in this field and the future direction of research.

From Traditional to New Benchmark Catalysts for CO2 Electroreduction

In the last century, conventional strategies pursued to reduce or convert CO₂ have shown limitations and, consequently, have been pushing the development of innovative routes. Among them, great efforts have been made in the field of heterogeneous electrochemical CO₂ conversion, which boasts the use of mild operative conditions, compatibility with renewable energy sources, and high versatility from an industrial point of view. Indeed, since the pioneering studies of Hori and co-workers, a wide range of electrocatalysts have been designed. Starting from the performances achieved using traditional bulk metal electrodes, advanced nanostructured and multi-phase materials are currently being studied with the main goal of overcoming the high overpotentials usually required for the obtainment of reduction products in substantial amounts. This review reports the most relevant examples of metal-based, nanostructured electrocatalysts proposed in the literature during the last 40 years. Moreover, the benchmark materials are identified and the most promising strategies towards the selective conversion to high-added-value chemicals with superior productivities are highlighted.

Ligand-Structure Effects on N-Heterocyclic Carbene Rhenium Photo- and Electrocatalysts of CO2 Reduction

Three novel rhenium N-heterocyclic carbene complexes, [Re]-NHC-1-3 ([Re] = fac-Re(CO)₃Br), were synthesized and characterized using a range of spectroscopic techniques. Photophysical, electrochemical and spectroelectrochemical studies were carried out to probe the properties of these organometallic compounds. Re-NHC-1 and Re-NHC-2 bear a phenanthrene backbone on an imidazole (NHC) ring, coordinating to Re by both the carbene C and a pyridyl group attached to one of the imidazole nitrogen atoms. Re-NHC-2 differs from Re-NHC-1 by replacing N-H with an N-benzyl group as the second substituent on imidazole. The replacement of the phenanthrene backbone in Re-NHC-2 with the larger pyrene gives Re-NHC-3. The two-electron electrochemical reductions of Re-NHC-2 and Re-NHC-3 result in the formation of the five-coordinate anions that are capable of electrocatalytic CO₂ reduction. These catalysts are formed first at the initial cathodic wave R1, and then, ultimately, via the reduction of Re-Re bound dimer intermediates at the second cathodic wave R2. All three Re-NHC-1-3 complexes are active photocatalysts for the transformation of CO₂ to CO, with the most photostable complex, Re-NHC-3, being the most effective for this conversion. Re-NHC-1 and Re-NHC-2 afforded modest CO turnover numbers (TONs), following irradiation at 355 nm, but were inactive at the longer irradiation wavelength of 470 nm. In contrast, Re-NHC-3, when photoexcited at 470 nm, yielded the highest TON in this study, but remained inactive at 355 nm. The luminescence spectrum of Re-NHC-3 is red-shifted compared to those of Re-NHC-1 and Re-NHC-2, and previously reported similar [Re]-NHC complexes. This observation, together with TD-DFT calculations, suggests that the nature of the lowest-energy optical excitation for Re-NHC-3 has π→π*(NHC-pyrene) and d_π(Re)→π*(pyridine) (IL/MLCT) character. The stability and superior photocatalytic performance of Re-NHC-3 are attributed to the extended conjugation of the π-electron system, leading to the beneficial modulation of the strongly electron-donating tendency of the NHC group.

Biodegradable polycarbonates from lignocellulose based 4-pentenoic acid and carbon dioxide

The production of biodegradable polycarbonate by copolymerizing CO₂ with epoxides has emerged as an effective method to utilize CO₂ in response to growing concerns about CO₂ emissions and plastic pollution. Previous studies have mainly focused on the preparation of CO₂-based polycarbonates from petrochemical-derived propylene oxide (PO) or cyclohexene oxide (CHO). However, to reduce dependence on fossil fuels, the development of 100% bio-based polymers has gained attention in polymer synthesis. Herein, we reported the synthesis of glycidyl 4-pentenoate (GPA) from lignocellulose based 4-pentenoic acid (4-PA), which was further copolymerized with CO₂ using a binary catalyst SalenCoCl/PPNCl to produce bio-based polycarbonates with vinyl side chains and molecular weights up to 17.1 kg/mol. Introducing a third monomer, PO, allows for the synthesis of the GPA/PO/CO₂ terpolymer, and the glass transition temperature (T _g) of the terpolymer can be adjusted from 2°C to 19°C by controlling the molar feeding ratio of GPA to PO from 7:3 to 3:7. Additionally, post-modification of the vinyl side chains enables the production of functional polycarbonates, providing a novel approach to the preparation of bio-based materials with diverse side chains and functions.

Splitting CO2 in Intense Pulsed Plasma Jets

The splitting of CO₂ was studied in a pulsed plasma discharge produced in a coaxial gun at voltages between ~1 and 2 kV and peak discharge currents of 7 to 14 kA. The plasma was ejected from the gun at a speed of a few km/s and had electron temperatures between 11 and 14 eV with peak electron densities ~2.4 × 10²¹ particles m^-3. Spectroscopic measurements were carried out in the plasma plume produced at pressures between 1 and 5 Torr, and evidence of CO₂ dissociation into oxygen and CO was found. An increased discharge current led to the observation of more intense spectra lines and the presence of new oxygen lines, which implies more dissociation channels. Several dissociation mechanisms are discussed, the main candidate being the splitting of the molecule by direct electron impact. Estimates of dissociation rates are made based on measured plasma parameters and interaction cross-sections available in the literature. A possible application of this technique is in future Mars missions where the coaxial plasma gun running in the atmosphere could be able to produce oxygen at a rate of the order of over 100 g per hour in a highly repetitive regime.

Trends in Research and Development for CO2 Capture and Sequestration

Technological and medical advances over the past few decades epitomize human capabilities. However, the increased life expectancies and concomitant land-use changes have significantly contributed to the release of ∼830 gigatons of CO₂ into the atmosphere over the last three decades, an amount comparable to the prior two and a half centuries of CO₂ emissions. The United Nations has adopted a pledge to achieve "net zero", i.e., yearly removing as much CO₂ from the atmosphere as the amount emitted due to human activities, by the year 2050. Attaining this goal will require a concerted effort by scientists, policy makers, and industries all around the globe. The development of novel materials on industrial scales to selectively remove CO₂ from mixtures of gases makes it possible to mitigate CO₂ emissions using a multipronged approach. Broadly, the CO₂ present in the atmosphere can be captured using materials and processes for biological, chemical, and geological technologies that can sequester CO₂ while also reducing our dependence on fossil-fuel reserves. In this review, we used the curated literature available in the CAS Content Collection to present a systematic analysis of the various approaches taken by scientists and industrialists to restore carbon balance in the environment. Our analysis highlights the latest trends alongside the associated challenges.

Synthesis and characterization of V2O5-Ga2O3 photocatalysts and their application on the photocatalytic reduction of CO2

The photocatalytic reduction of carbon dioxide (CO₂) to produce methanol (CH₃OH) is a promising strategy for producing clean energy. The catalyst, the aqueous medium, and the UV light are key parameters for the formation of the most relevant pair (e^-/h⁺) and the specific selectivity towards the desired product (methanol). The use of Ga₂O₃ and V₂O₅ in the photocatalytic reduction of CO₂ to produce methanol has been little studied. However, the combination of these oxides is important to generate synergies and decrease the band energy, enhancing the photocatalytic activity in CO₂ reduction. In this work, V₂O₅-Ga₂O₃ combined photocatalysts have been prepared and investigated for the photocatalytic reduction of CO₂. These photocatalysts were characterized by spectroscopic and microscopic techniques. The results showed that textural properties such as surface area and morphology do not influence the photocatalytic activity. However, species such as Ga2p_3/2 and Ga2p_1/2 identified by XPS enhanced the photocatalytic activity, most likely due to the formation of vacancies and the reduction of the bandgap in the combined oxides, as compared to single oxides. The contribution of these factors in pair interactions (e^-/h⁺) with CO₂ to generate methanol is demonstrated.

Polymers without Petrochemicals: Sustainable Routes to Conventional Monomers

Access to a wide range of plastic materials has been rationalized by the increased demand from growing populations and the development of high-throughput production systems. Plastic materials at low costs with reliable properties have been utilized in many everyday products. Multibillion-dollar companies are established around these plastic materials, and each polymer takes years to optimize, secure intellectual property, comply with the regulatory bodies such as the Registration, Evaluation, Authorisation and Restriction of Chemicals and the Environmental Protection Agency and develop consumer confidence. Therefore, developing a fully sustainable new plastic material with even a slightly different chemical structure is a costly and long process. Hence, the production of the common plastic materials with exactly the same chemical structures that does not require any new registration processes better reflects the reality of how to address the critical future of sustainable plastics. In this review, we have highlighted the very recent examples on the synthesis of common monomers using chemicals from sustainable feedstocks that can be used as a like-for-like substitute to prepare conventional petrochemical-free thermoplastics.

Methanation of CO2 over High Surface Nickel/Aluminates Compounds Prepared by a Self-Generated Carbon Template

Catalytic gas-phase hydrogenation of CO2 into CH4 was tested under three different nickel/aluminate catalysts obtained from precursors of hexaaluminate composition (MAl16O19, M = Mg, Ca, Ba). These catalysts were prepared using a carbon template method, where carbon is self-generated from a sol-gel that contains an excess of citric acid and the Al and M salts (Ba2+, Ca2+, Mg2+) by two-step calcination in an inert/oxidizing atmosphere. This procedure yielded Ni particles decorating the surface of a porous high surface area matrix, which presents a typical XRD pattern of aluminate structure. Ni particles are obtained with a homogeneous distribution over the surface and an average diameter of ca 25–30 nm. Obtained materials exhibit a high conversion of CO2 below 500 °C, yielding CH4 as a final product with selectivity >95%. The observed trend with the alkaline earth cation follows the order NiBaAlO-PRx > NiCaAlO-PRx > NiMgAlO-PRx. We propose that the high performance of the NiBaAlO sample is derived from both an appropriate distribution of Ni particle size and the presence of BaCO3, acting as a CO2 buffer in the process.

Electrochemical Reduction of Gaseous CO2 at Low-Intermediate Temperatures Using a Solid Acid Membrane Cell

In this study, the electrochemical reduction of gaseous carbon dioxide (CO2) at low-intermediate temperatures (~250 °C) using a solid acid membrane cell was demonstrated, for the first time. Compared to solid oxide fuel cells, which operate at higher temperatures (>600 °C), this system can utilize the advantage of gaseous CO2 reduction, while being considerably more simply implemented. A Cu-based electrocatalyst was developed as a cathode side catalyst for electrochemical reduction of gaseous CO2 and specifically demonstrated its efficacy to produce hydrocarbons and liquid fuels. The result is significant in terms of resolving the challenges associated with producing hydrocarbons and liquid fuels from CO2 reduction. The present study introduced the novel system with the solid acid membrane cell and the Cu-based catalyst for electrochemically reducing gaseous CO2. This system showed a new possibility for electrochemical reduction of gaseous CO2, as it operates at lower temperatures, produces hydrocarbons and liquid fuels and has plenty of room for improvement.

Alloying strategies for tuning product selectivity during electrochemical CO2 reduction over Cu

Excessive reliance on fossil fuels has led to the release and accumulation of large quantities of CO₂ into the atmosphere which has raised serious concerns related to environmental pollution and global warming. One way to mitigate this problem is to electrochemically recycle CO₂ to value-added chemicals or fuels using electricity from renewable energy sources. Cu is the only metallic electrocatalyst that has been shown to produce a wide range of industrially important chemicals at appreciable rates. However, low product selectivity is a fundamental issue limiting commercial applications of electrochemical CO₂ reduction over Cu catalysts. Combining copper with other metals that actively contribute to the electrochemical CO₂ reduction reaction process can selectively facilitate generation of desirable products. Alloying Cu can alter surface binding strength through electronic and geometric effects, enhancing the availability of surface confined carbon species, and stabilising key reduction intermediates. As a result, significant research has been undertaken to design and fabricate copper-based alloy catalysts with structures that can enhance the selectivity of targeted products. In this article, progress with use of alloying strategies for development of Cu-alloy catalysts are reviewed. Challenges in achieving high selectivity and possible future directions for development of new copper-based alloy catalysts are considered.

Advances in Biomimetic Photoelectrocatalytic Reduction of Carbon Dioxide

Emerging photoelectrocatalysis (PEC) systems synergize the advantages of electrocatalysis (EC) and photocatalysis (PC) and are considered a green and efficient approach to CO₂ conversion. However, improving the selectivity and conversion rate remains a major challenge. Strategies mimicking natural photosynthesis provide a prospective way to convert CO₂ with high efficiency. Herein, several typical strategies are described for constructing biomimetic photoelectric functional interfaces; such interfaces include metal cocatalysts/semiconductors, small molecules/semiconductors, molecular catalysts/semiconductors, MOFs/semiconductors, and microorganisms/semiconductors. The biomimetic PEC interface must have enhanced CO₂ adsorption capacity, preferentially activate CO₂ , and have an efficient conversion ability; with these properties, it can activate CO bonds effectively and promote electron transfer and CC coupling to convert CO₂ to single-carbon or multicarbon products. Interfacial electron transfer and proton coupling on the biomimetic PEC interface are also discussed to clarify the mechanism of CO₂ reduction. Finally, the existing challenges and perspectives for biomimetic photoelectrocatalytic CO₂ reduction are presented.

Simultaneous CO2 reduction and NADH regeneration using formate and glycerol dehydrogenase enzymes co-immobilized on modified natural zeolite

In this work, the co-immobilization of formate dehydrogenase (FDH) and glycerol dehydrogenase (GlyDH) enzymes is proposed to reduce CO₂ into formic acid, an important chemical intermediate. The reduction of carbon dioxide is carried out by FDH to obtain formic acid, simultaneously, the GlyDH regenerated the nicotinamide cofactor in the reduced form (NADH) by the oxidation of glycerol into dihydroxyacetone. Natural zeolite was selected as immobilization support given its good properties and low cost. The natural zeolite was modified with subsequent acid-alkaline attacks to obtain a mesostructurization of the clinoptilolite. The two enzymes were co-immobilized on clinoptilolite, previously hetero-functionalized with amino and glyoxyl groups. The distribution of the enzymes was confirmed by fluorescence microscopy analysis. Furthermore, a great increase in the retained activity for the formate dehydrogenase enzyme was noted, passing from 18% to 89%, when the mesostructured clinoptilolite was used as support. The immobilization yield of formate dehydrogenase and glycerol dehydrogenase is around 100% with all the supports studied. The promising results suggest a possible development of this procedure in enzyme immobilization and biocatalysis. The biocatalysts were characterized to find the optimal pH and temperature. Furthermore, a thermal stability test at 50 °C was carried out on both enzymes, in free and immobilized forms. Finally, it was shown that the biocatalyst is effective in reducing CO₂, both by using the cofactor in the reduced form (NADH) or the oxidized form (NAD⁺), obtaining NADH through the regeneration with glycerol in this latter case.

Mass transfer characteristics and effect of flue gas used in microalgae culture

Flue gas not only contains carbon dioxide (CO₂) but also air pollutants (sulfur oxides (SO_x) and nitrogen oxides (NO_x)). The effective utilization of flue gas could help us to reduce the cost of microalgal biomass production. This study assessed and explored the utilization of flue gas for the absorption characteristics of different components and their biological effect in microalgal culture systems. In abiotic absorption experiments, the absorptivity of CO₂ was reduced by a maximum of 3.1%, and the concentration of the available carbon source in the culture medium was decreased by 6.7% when sulfur dioxide (SO₂, at 100 mg/m³) was presented in the flue gas. Meanwhile, the presence of oxygen (O₂, at 4%) in the flue gas improved the absorptivity of nitric oxide (NO). When Scenedesmus dimorphus was cultured using bisulfites and nitrites (at 10 mmol/L and 8 mmol/L, respectively) as the sulfur and nitrogen sources, SO_x and NO_x in the flue gas did not significantly affect growth of microalgal cells and the carbohydrate, lipid, and protein content. The consumption rates of nutrient elements were calculated, which could provide an adjustment strategy for the initial gas source when culturing microalgae with the flue gas. This study indicates that the flue gas used for microalgal culture should be partially desulfurized, so that the SO_x and CO₂ concentrations can optimize growth of microalgal cells, while the denitrification might not be needed since the flue gas can be oxidized to utilize the NO. KEY POINTS: • The concentration of the available carbon source in the culture medium was decreased when SO₂ was presented in the flue gas, and the presence of O₂ in the flue gas improved the absorptivity of NO. • An adjustment strategy for the initial gas source when culturing microalgae with the flue gas was firstly proposed. • For flue gas containing 10% CO₂ and 60 mg/m³ of SO₂, growth of Scenedesmus dimorphus showed no difference in cell growth in normal culture conditions.

Facile Construction of Carboxyl-Functionalized Ionic Polymer towards Synergistic Catalytic Cycloaddition of Carbon Dioxide into Cyclic Carbonates

The development of bifunctional ionic polymers as heterogeneous catalysts for effective, cocatalyst- and metal-free cycloaddition of carbon dioxide into cyclic carbonates has attracted increasing attention. However, facile fabrication of such polymers having high numbers of ionic active sites, suitable types of hydrogen bond donors (HBDs), and controlled spatial positions of dual active sites remains a challenging task. Herein, imidazolium-based ionic polymers with hydroxyl/carboxyl groups and high ionic density were facilely prepared by a one-pot quaternization reaction. Catalytic evaluation demonstrated that the presence of HBDs (hydroxyl or carboxyl) could enhance the catalytic activities of ionic polymers significantly toward the CO₂ cycloaddition reaction. Among the prepared catalysts, carboxyl-functionalized ionic polymer (PIMBr-COOH) displayed the highest catalytic activity (94% yield) in the benchmark cycloaddition reaction of CO₂ and epichlorohydrin, which was higher than hydroxyl-functionalized ionic polymer (PIMBr-OH, 76% yield), and far exceeded ionic polymer without HBDs groups (PIMBr, 54% yield). Furthermore, PIMBr-COOH demonstrated good recyclability and wide substrate tolerance. Under ambient CO₂ pressure, a number of epoxides were smoothly cycloadded into cyclic carbonates. Additionally, density functional theory (DFT) calculation verified the formation of strong hydrogen bonds between epoxide and the HBDs of ionic polymers. Furthermore, a possible mechanism was proposed based on the synergistic effect between carboxyl and Br⁻ functionalities. Thus, a facile, one-pot synthetic strategy for the construction of bifunctional ionic polymers was developed for CO₂ fixation.

Process engineering strategy for large scale outdoor cultivation of Tetradesmus obliquus CT02 coupled with pH guided CO2 feeding

A novel CO₂ tolerant microalga Tetradesmus obliquus CT02, was previously evaluated to be a suitable bio refinery platform for synthesis of bioactive molecules, biodiesel, and biofertilizer. In the present study, a process engineering strategy was developed targeting improved growth performance of the strain at large scale under fluctuating outdoor environmental conditions. The strategy relies on maintaining pH of the culture at its optimal value via cascade control with CO₂ feeding. The strategy was developed at laboratory scale bubble column photobioreactor under diurnal variation of simulated sunlight intensity and was further validated through growth performance of the strain under outdoor conditions in a 100 L airlift bioreactor. Under laboratory condition, 53.3% and 85.16% improvement in biomass concentration (1.87 g L^-1) and productivity (114.8 mg L^-1 day^-1) was achieved as compared to the uncontrolled pH, respectively. The strategy demonstrated a significant improvement in biomass concentration and productivity by 225.7% and 121.6% respectively, compared to the pH uncontrolled batch, even under outdoor fluctuating environmental condition.

Synthetic-Gas Production through Chemical Looping Process with Concentrating Solar Dish: Temperature-Distribution Evaluation

The energy crisis and the adaptation of the global energy structure promote the development of renewable energies, in particular solar energy, also for syngas production. In this work, attention was focused on solar devices, necessary to provide high-temperature heat for the reduction reaction of metal oxides involved in the chemical looping driven by solar energy. Thermochemical processes for synthetic-gas production and CO2 sequestration were investigated using a concentrating solar thermal system. This paper proposes a useful forecasting model of the receiver temperature to make a realistic estimate of the system’s producibility for the different periods of the year. The model proposed was validated in the winter season, and the predicted temperature varied below 5% considering the real experimental data (442–472 °C). The validated model was used to evaluate the temperature receiver in spring and in summer, when the thermal level is reliable for thermochemical processes. From the spring season until the completion of the summer season, optimum conditions inside the receiver were reached (above 1000 °C). These preliminary findings could be used for the development of large-scale production systems.

Emerging Trends in Sustainable CO2 -Management Materials

With the rising level of atmospheric CO₂ worsening climate change, a promising global movement toward carbon neutrality is forming. Sustainable CO₂ management based on carbon capture and utilization (CCU) has garnered considerable interest due to its critical role in resolving emission-control and energy-supply challenges. Here, a comprehensive review is presented that summarizes the state-of-the-art progress in developing promising materials for sustainable CO₂ management in terms of not only capture, catalytic conversion (thermochemistry, electrochemistry, photochemistry, and possible combinations), and direct utilization, but also emerging integrated capture and in situ conversion as well as artificial-intelligence-driven smart material study. In particular, insights that span multiple scopes of material research are offered, ranging from mechanistic comprehension of reactions, rational design and precise manipulation of key materials (e.g., carbon nanomaterials, metal-organic frameworks, covalent organic frameworks, zeolites, ionic liquids), to industrial implementation. This review concludes with a summary and new perspectives, especially from multiple aspects of society, which summarizes major difficulties and future potential for implementing advanced materials and technologies in sustainable CO₂ management. This work may serve as a guideline and road map for developing CCU material systems, benefiting both scientists and engineers working in this growing and potentially game-changing area.