Insight into ZnO/carbon hybrid materials for photocatalytic reduction of CO2: An in-depth review

Accelerating carrier separation to boost the photocatalytic CO2 reduction performance of ternary heterojunction Ag-Ti3C2Tx/ZnO catalysts

Developing low-cost and efficient photocatalyst/co-catalyst systems that promote CO2 reduction remains a challenge. In this work, Ag-Ti3C2Tx composites were made using a self-reduction technique, and unique Ag-Ti3C2Tx/ZnO ternary heterojunction structure photocatalysts were created using an electrostatic self-assembly process. The photocatalyst's close-contact heterogeneous interface increases photogenerated carrier migration efficiency. The combination of Ti3C2Tx and Ag improves the adsorption active sites and reaction centers for ZnO, making it a key site for CO2 adsorption and activation. The best photocatalysts had CO and CH4 reduction efficiencies of 11.985 and 0.768 μmol g-1 h-1, respectively. The CO2 conversion was 3.35 times better than that of pure ZnO, which demonstrated remarkable stability even after four cycle trials with no sacrificial agent. Furthermore, in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS) and valence band spectroscopy were utilized to propose the photocatalytic reaction mechanism and electron transfer channels of the Ag-Ti3C2Tx/ZnO system, confirming that CHO* and CO* are the important intermediates in the generation of CH4 and CO. This study introduces a novel method for the development of new and efficient photocatalysts and reveals that Ti3C2Tx MXene is a viable co-catalyst for applications.

Photoactivity of amorphous and crystalline TiO2 nanotube arrays (TNA) films in gas phase CO2 reduction to methane with simultaneous H2 production

This study assessed the photoactivity of amorphous and crystalline TiO2 nanotube arrays (TNA) films in gas phase CO2 reduction. The TNA photocatalysts were fabricated by titanium anodization and submitted to an annealing treatment for crystallization and/or cathodic reduction to introduce Ti3+ and oxygen vacancies into the TiO2 structure. The cathodic reduction demonstrated a significant effect on the generated photocurrent. The photoactivity of the four TNA catalysts in CO2 reduction with water vapor was evaluated under UV irradiation for 3 h, where CH4 and H2 were detected as products. The annealed sample exhibited the best performance towards methane with a production rate of 78 μmol gcat-1 h-1, followed by the amorphous film, which also exhibited an impressive formation rate of 64 μmol gcat-1 h-1. The amorphous and reduced-amorphous films exhibited outstanding photoactivity regarding H2 production (142 and 144 μmol gcat-1 h-1, respectively). The annealed catalyst also revealed a good performance for H2 production (132 μmol gcat-1 h-1) and high stability up to five reaction cycles. Molecular dynamic simulations demonstrated the changes in the band structure by introducing oxygen vacancies. The topics covered in this study contribute to the Sustainable Development Goals (SDG), involving affordable and clean energy (SDG#7) and industry, innovation, and infrastructure (SDG#9).

Simultaneous preparation of ZnO/rGO composites through Zn(OH)2 decomposition and graphite oxide reduction and their photocatalytic properties

ZnO/reduced graphite oxide (rGO) composites were simultaneously prepared by the thermal reduction of graphite oxide (GO) and the decomposition of Zn(OH)2. The samples were characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, photoluminescence, and DRS. Results indicate that Zn(OH)2 was heated and decomposed into ZnO at a low temperature (200 ℃), while GO was reduced to graphene. The synthesized ZnO particles were small and loaded on graphene layers. The ZnO/rGO photocatalysts exhibited excellent photocatalytic activity against methylene blue (MB) under simulated sunlight irradiation. The ZnO/50% rGO photocatalyst showed the best MB photodegradation rate of up to 99.7% within 3 min. Synchronous reaction provided an efficient, simple, and fast preparation method for ZnO/rGO composites, with an excellent solar photocatalytic degradation ability.

Recent advances and progress in biotemplate catalysts for electrochemical energy storage and conversion

Complex structures and morphologies in nature endow materials with unexpected properties and extraordinary functions. Biotemplating is an emerging strategy for replicating nature structures to obtain materials with unique morphologies and improved properties. Recently, efforts have been made to use bio-inspired species as a template for producing morphology-controllable catalysts. Fundamental information, along with recent advances in biotemplate metal-based catalysts are presented in this review through discussions of various structures and biotemplates employed for catalyst preparation. This review also outlines the recent progress on preparation routes of biotemplate catalysts and discusses how the properties and structures of these templates play a crucial role in the final performance of metal-based catalysts. Additionally, the application of bio-based metal and metal oxide catalysts is highlighted for various key energy and environmental technologies, including photocatalysis, fuel cells, and lithium batteries. Biotemplate metal-based catalysts display high efficiency in several energy and environmental systems. Note that this review provides guidance for further research in this direction.

A comprehensive correlated analysis of Ra-Doped (ZnO2, ZnO) for optoelectronic applications: a first-principle study

CONTEXT

Zinc oxide (ZnO) exhibits bulk-like behavior and is modified by radium doping to attain favorable electronic properties. The elastic and mechanical response of ZnO₂ is much more favorable than ZnO material. The change in thermal expansion, Debye temperature, free energy, entropy, and specific heat leads it to be a good candidate for thermodynamic applications at low and high temperatures. Optical properties like dielectric function, absorption, refraction, reflection, and refractive index obtained after suitable doping transform the material as optically active. ZnO₂ has low reflectivity and zero absorption below the electronic band gap as compared to ZnO in a wider spectral range. Our analyses on doped ZnO₂ and ZnO make us confident for a wide range of applications in optoelectronic and anti-bacterial treatment in biomedical devices. Especially due to high flexibility and high light transmission, ZnO₂ is an excellent applicant for transparent electrodes.

METHODS

Density functional theory has been employed in consistency with generalized gradient approximation (GGA) with PBEsol to analyze the structural, electronic, elastic, mechanical, thermodynamic, and optical response of pure and Ra-doped (ZnO₂ and ZnO) materials.

Visible-Light-Driven CO2 Reduction into Methanol Utilizing Sol-Gel-Prepared CeO2-Coupled Bi2O3 Nanocomposite Heterojunctions

Carbon dioxide (CO2) photoreduction into renewable fuels over semiconductor photocatalysts has emerged as a green and sustainable alternative for energy production. Consequently, tremendous efforts are being performed to develop robust and sustainable photocatalysts. Therefore, visible-light active nanocomposite photocatalysts composed of 5.0–20.0 wt.% bismuth oxide (Bi2O3) and cerium oxide (CeO2) were synthesized by a sol-gel-based process. The prepared nanocomposites were evaluated for the promoted photocatalytic reduction of CO2 into methanol (CH3OH). Various characterizations of the obtained photocatalysts exposed an outstanding development of crystalline structure, morphology, and surface texture due to the presence of Bi2O3. Moreover, the absorbance of light in the visible regime was improved with enhanced charge separation, as revealed by the exploration of optical response, photoluminescence, and photocurrent measurements. The overall bandgap calculations revealed a reduction to 2.75 eV for 15% Bi2O3/CeO2 compared to 2.93 eV for pure CeO2. Moreover, the adjusted 2.8 g L−1 dose of 15% Bi2O3/CeO2 selectively produced 1300 μmol g−1 CH3OH after 9 h of visible light irradiation. This photocatalyst also exhibits bearable reusability five times. The improved progression of 15% Bi2O3/CeO2 is denoted by significant charge separation as well as enhanced mobility. This study suggests the application of metal oxide-based heterojunctions for renewable fuel production under visible light.