QBD-based systematic development of Bosentan SNEDDS: Formulation, characterization and pharmacokinetic assessment

An overview of oral bioavailability enhancement through self-emulsifying drug delivery systems

INTRODUCTION

The pharmaceutical technologists face a lot of challenges and limitations when designing novel drug delivery systems such as low oral bioavailability of many drugs, primarily due to poor solubility, slow dissolution rates, limited permeability through gastrointestinal mucosa, and rapid degradation within the body.

AREAS COVERED

The biopharmaceutical classification (BCS) classification represents a map in drug delivery research. Numerous active ingredients are characterized by low bioavailability due to poor water solubility, especially active ingredients of BCS class II and IV. Self-emulsifying drug delivery systems (SEDDS) could act as game changer in order to overcome the challenges and limitations of poor bioavailability. In this review, timelines representing the launch of self-emulsifying drug delivery systems, their introduction to the pharmaceutical platform and their benefits will be discussed in detail.

EXPERT OPINION

The development of multifunctional systems capable of combining controlled release, targeted delivery, and diagnostic capabilities is a promising avenue. As the technology matures, self-microemulsifying drug delivery systems and self-nanoemulsifying drug delivery systems are likely to become a standard approach for delivering BCS class II and IV drugs, transforming the pharmaceutical landscape.

Design, Characterization, and Evaluation of Solid-Self-Nano-Emulsifying Drug Delivery of Benidipine with Telmisartan: Quality by Design Approach

The main purpose of this study was to design and develop a solid self-nanoemulsifying drug delivery system (S-SNEDDS) for the oral administration of benidipine (BD) and telmisartan (TEL) using the adsorption method with eucalyptus oil, Transcutol P, and Kolliphor EL via the Box-Behnken design approach. The prepared SNEDDS formulations were characterized using FTIR, DSC, SEM, and PXRD techniques and evaluated for zeta potential, refractive index, drug concentration, resistance to dilution, viscosity, and thermodynamic stability. Additionally, in vitro and stability studies were conducted. The results revealed that all prepared formulations (BT1-BT15) exhibited favorable zeta potential (17.2-28.39 mV) and polydispersity index (PDI) values (0.226-0.354). Among them, formulation BT11 demonstrated a desirable droplet size of 175.12 ± 2.70 nm, a PDI of 0.226, a zeta potential of -24.98 ± 0.18 mV, a self-emulsification time of 53.00 ± 2.10 s, a transmittance percentage of 99.6 ± 0.3%, and a drug release of 92.65 ± 1.70% within 15 min. BT11 exhibited significantly faster drug release compared to the commercially available product benidipine T (4 mg/40 mg) and the pure drugs BD and TEL, releasing more than 96% of both drugs in 0.1 N HCl within 60 min. Furthermore, BT11 demonstrated stability throughout the product's stability testing. These findings suggest that the oral S-SNEDDS formulation of BD and TEL can enhance the drugs' water solubility, potentially improving therapeutic outcomes and increasing patient compliance.

Application of quality by design in optimization of nanoformulations: Principle, perspectives and practices

Nanoparticulate drug delivery systems (NDDS) based nanoformulations have emerged as promising drug delivery systems. Various NDDS-based formulations have been reported such as polymeric nanoparticles (NPs), nanoliposomes, solid lipid NPs, nanocapsules, liposomes, self-nano emulsifying drug delivery systems, pro liposomes, nanospheres, microemulsion, nanoemulsion, gold NPs, silver NPs and nanostructured lipid carrier. They have shown numerous advantages such as enhanced bioavailability, aqueous solubility, permeability, controlled release profile, and blood-brain barrier (BBB) permeability. This advantage of NDDS can help to deliver pure drugs to the target site. However, the formulation of nanoparticles is a complex process that requires optimization to ensure product quality and efficacy. Quality by Design (QbD) is a systemic approach that has been implemented in the pharmaceutical industry to improve the quality and reliability of drug products. QbD involves the optimization of different parameters like zeta potential (ZP), particle size (PS), entrapment efficiency (EE), polydispersity index (PDI), and drug release using statistical experimental design. The present article discussed the detailed role of QbD in optimizing nanoformulations and their advantages, advancement, and applications from the industrial perspective. Various case studies of QbD in the optimization of nanoformulations are also discussed.

Garala K, S S, Rahamathulla M, Ahmed MM, Farhana SA, Pasha I. Quality by design aided self-nano emulsifying drug delivery systems development for the oral delivery of Benidipine: Improvement of biopharmaceutical performance

The primary objective of the research effort is to establish efficient solid self-nanoemulsifying drug delivery systems (S-SNEDDS) for benidipine (BD) through the systematic application of a quality-by-design (QbD)-based paradigm. Utilizing Labrafil M 2125 CS, Kolliphor EL, and Transcutol P, the BD-S-SNEDDS were created. The central composite design was adopted to optimize numerous components. Zeta potential, drug concentration, resistance to dilution, pH, refractive index, viscosity, thermodynamic stability, and cloud point were further investigated in the most efficient formulation, BD14, which had a globule size of 156.20 ± 2.40 nm, PDI of 0.25, zeta potential of -17.36 ± 0.18 mV, self-emulsification time of 65.21 ± 1.95 s, % transmittance of 99.80 ± 0.70%, and drug release of 92.65 ± 1.70% at 15 min. S-SNEDDS were formulated using the adsorption process and investigated via Fourier transform infrared spectroscopy, Differential scanning calorimeter, Scanning electron microscopy, and powder X-ray diffraction. Optimized S-SNEDDS batch BD14 dramatically decreased blood pressure in rats in contrast to the pure drug and the commercial product, according to a pharmacodynamics investigation. Accelerated stability tests validated the product's stability. Therefore, the development of oral S-SNEDDS of BD may be advantageous for raising BD's water solubility and expanding their releasing capabilities, thereby boosting oral absorption.

Preparation of orodispersible tablets of bosentan using xylitol and menthol as dissolution enhancers

Bosentan is a drug used to treat pulmonary hypertension via dual endothelial receptor antagonism. Bosentan has a restricted oral bioavailability, a problem that's mostly due to poor solubility and hepatic metabolism. It is extensively used for the elderly and children who require a friendly dosage form like orodispersible tablets. So, the goal of this research work was to hasten the dissolution rate of bosentan to produce an orodispersible tablet with immediate drug release. Bosentan was exposed to ethanol-assisted kneading with a rise of xylitol or menthol concentrations (1:1 and 1:2 molar ratio of bosentan with excipient). In addition to observing the dissolution behavior, the resulting dry products were investigated using Fourier transform infrared spectroscopy (FTIR), differential thermal analysis (DTA), and X-ray diffraction (XRD). The FTIR reflected possible hydrogen bonding with xylitol and menthol. DSC studies reflected a reduction in the enthalpy and Tm. These results with XRD data reflected partial co-amorphization in the case of xylitol and eutaxia in the case of menthol. These modifications were related to an accelerated dissolving rate. The developed systems were fabricated as orodispersible tablets which exhibited immediate release of bosentan. Thus, the current study offered simple co-processing for the preparation of orodispersible bosentan tablets.

Quality by design approach-based fabrication and evaluation of self-nanoemulsifying drug delivery system for improved delivery of venetoclax

Breast cancer is reported as one of the most prevalent non-cutaneous malignancies in women. Venetoclax (VEN) is an approved BCl-2 inhibitor for the treatment of chronic myeloid leukemia with very limited oral bioavailability and exhibits an enormous impact on breast cancer. In the current investigation, venetoclax-loaded self-nanoemulsifying drug delivery systems (VEN-SNEDDS) were designed and fabricated to improve the aqueous solubility, permeability, and anticancer efficacy of VEN. Various surface-active parameters of the reconstituted SNEDDS were determined to scrutinize the performance of the selected surfactant mixture. Central composite design (CCD) was used to optimize the VEN-SNEDDS. The globule size of reconstituted VEN-SNEDDS was 71.3 ± 2.8 nm with a polydispersity index of 0.113 ± 0.01. VEN-SNEDDS displayed approximately 3-4 fold, 6-7 fold, and 5-6 fold reduced IC50 as compared to free VEN in MDA-MB-231, MCF-7, and T47 D cells, respectively. VEN-SNEDDS showed greater cellular uptake, apoptosis, reactive oxygen species generation, and higher BAX/BCL2 ratio with decreased caspase 3 and 8 and BCL-2 levels in the MDA-MB-231 cells compared to pure VEN. VEN-SNEDDS exhibited approximately fivefold enhancement in Cmax and an improved oral bioavailability compared to VEN suspension in in vivo pharmacokinetic studies.

Improving Oral Bioavailability of Herbal Drugs: A Focused Review of Self-Emulsifying Drug Delivery System for Colon Cancer

One of the most frequent malignancies in the world is colon cancer. Both men and women are affected in the same way. The colon, which makes up the last part of the digestive system and is where water and minerals from food waste are absorbed, is vulnerable to cancer. The most suitable technique of drug administration is oral administration. Aqueous solubility is low in more than 40% of novel chemical entities, resulting in poor oral drug administration. In the formulation of oral medications, low inconsistent bioavailability is a major challenge. Increasing medication bioavailability is one of the most difficult aspects of pharmacological development. Self-nano-emulsifying drug delivery systems (SNEDDS) have been a potential platform for biopharmaceutical classification system class II and IV drugs for oral delivery. Enhanced bioavailability and solubility, control of toxicity, pharmacological effects, improved stability, improved tissue macrophage dispersion, prolonged delivery, and resistance to physical and chemical degradation are just a few benefits of SNEDDS for herbal drugs. To increase activity and address problems associated with herbal drugs, nanosized modern drug delivery technologies are expected to have a promising future. Improved patient compliance, fewer problems with liquid SNEDDS filled in capsules, and enhanced stability SNEDDS are all benefits of converting liquid SNEDDS to solid oral dosage forms or solid SNEDDS. SNEDDS differs from previous solubility augmentation methods due to its biodegradable components, simplicity of large-scale production, and range of drug-targeting possibilities.

Development and pharmacokinetic evaluation of Neusilin® US2-based S-SNEDDS tablets for bosentan: Fasted and fed states bioavailability, IVIS® real-time biodistribution, and ex-vivo imaging

The study reported here aimed to develop and optimize the S-SNEDDS tablet of bosentan (BOS) and to investigate its pharmacokinetic and biodistribution properties. The BOS-loaded SNEDDS have been developed and characterized in a previous study. The BOS-loaded SNEDDS formulation was converted to S-SNEDDS using Neusilin® US2. The S-SNEDDS tablets were obtained using the direct compression technique, and in vitro dissolution, in vitro lipolysis, and ex-vivo permeability studies of the tablets were performed. The S-SNEDDS tablet and reference tablet (Tracleer®) were administered to male Wistar rats at 50 mg/kg dose by oral gavage in fasted and fed state conditions. The biodistribution of the S-SNEDDS tablet was investigated in Balb/c mice using fluorescent dye. The tablets were dispersed in distilled water before administration to animals. The relationship between in vitro dissolution data and in vivo plasma concentration was examined. The S-SNEDDS tablets showed 2.47, 7.49, 3.70, and 4.39 increases in the percentages of cumulative dissolution in FaSSIF, FeSSIF, FaSSIF-V2, and FeSSIF-V2, respectively, when compared to the reference, and increased the Cmax and AUC 2.65 and 1.28-fold and 4.73 and 2.37-fold in fasted and fed states, respectively, when compared to the reference. S-SNEDDS tablets also significantly reduced interindividual variability in both fasted and fed states (p < 0.05). The XenoLight™ DiR and VivoTag® 680XL labeled S-SNEDDS tablet formulation increased the real-time biodistribution in the body by factors of 2.4 and 3.4 and organ uptake and total emission increased by factors of 2.8 and 3.1, respectively. The IVIVR has been successfully established for S-SNEDDS tablets (R2 > 0.9). The present study confirms the potential of the S-SNEDDS tablet to enhance the in vitro and in vivo performance of BOS.

Optimization and characterization of self-nanoemulsifying drug delivery system of iloperidone using box-behnken design and desirability function

PURPOSE

Iloperidone (IP) is an antipsychotic drug which belongs to Biopharmaceutical Classification System (BCS) II exhibiting poor aqueous solubility. The current investigation explores the possibility of enhancement of solubility and dissolution characteristics of IP by formulation of liquid self-nano emulsifying drug delivery system (L-SNEDDS) utilizing Box-Behnken Design (BBD) and desirability function.

METHODS

The oils, surfactants and co-surfactants used in the study were selected based on solubility of the drug and their emulsification ability. Optimization of the formulation was performed using BBD by employing four response variables such as globule size (nm), percentage transmittance (%), self-emulsification time (sec) and percent drug released in 15min. 2D contour plots and 3D response surface plots were constructed using Design Expert software.

RESULTS

The developed optimal L-SNEDDS of IP through BBD approach resulted in improvement of solubility and dissolution rate as compared with the pure drug. Based on desirability function, optimized formulation was prepared and was assessed for response variables (globule size, percentage transmittance, self-emulsification time and percent drug dissolved in 15min). The characterization studies revealed droplet size to be 21.80±2.41nm, 99.584±0.65% transmittance, 24.43±2.12sec emulsification time and 95.31±1.57% cumulative drug release in 15min.

CONCLUSION

The results conclude the potentiality of prepared L-SNEDDS in improving solubility and dissolution rate of IP.

SEDDS Basic Design and Recent Formulation Advancement: A Concurrent Review

In the present scenario, lipid-based novel drug delivery systems are the area of interest for the formulation scientist in order to improve the bioavailability of poorly water-soluble drugs. A selfemulsifying drug delivery system (SEDDS) upon contact with the gastrointestinal fluid, forms an o/w emulsion. SEDDS has gained popularity as a potential platform for improving the bioavailability of the lipophilic drug by overcoming several challenges. The various advantages like improved solubility, bypassing lymphatic transport, and improvement in bioavailability are associated with SMEDDS or SNEDDS. The extent of the formation of stable SEDDS depends on a specific combination of surfactant, co-surfactant, and oil. The present review highlighted the different aspects of formulation design along with optimization and characterization of SEDDS formulation. It also gives a brief description of the various aspects of the excipients used in SEDDS formulation. This review also includes the conflict between types of SEDDS based on droplet size. There is an extensive review of various research regarding different solidification techniques used for SEDDS in the last three years.

A Pharmaco-Technical Investigation of Thymoquinone and Peat-Sourced Fulvic Acid Nanoemulgel: A Combination Therapy

Thymoquinone has a multitude of pharmacological effects and has been researched for a wide variety of indications, but with limited clinical success. It is associated with pharmaco-technical caveats such as hydrophobicity, high degradation, and a low oral bioavailability. A prudent approach warrants its usage through an alternative dermal route in combination with functional excipients to harness its potential for treating dermal afflictions, such as psoriasis. Henceforth, the present study explores a nanoformulation approach for designing a fulvic acid (peat-sourced)-based thymoquinone nanoemulsion gel (FTQ-NEG) for an enhanced solubility and improved absorption. The excipients, surfactant/co-surfactant, and oil selected for the o/w nanoemulsion (FTQ-NE) are Tween 80/Transcutol-P and kalonji oil. The formulation methodology includes high-energy ultrasonication complemented with a three-dimensional/factorial Box-Behnken design for guided optimization. The surface morphology assessment through scanning/transmission electron microscopy and fluorescence microscopy revealed a 100 nm spherical, globule-like structure of the prepared nanoemulsion. Furthermore, the optimized FTQ-NE had a zeta potential of -2.83 ± 0.14 Mv, refractive index of 1.415 ± 0.036, viscosity of 138.5 ± 3.08 mp, and pH of 5.8 ± 0.16, respectively. The optimized FTQ-NE was then formulated as a gel using Carbopol 971^® (1%). The in vitro release analysis of the optimized FTQ-NEG showed a diffusion-dominant drug release (Higuchi model) for 48 h. The drug permeation flux observed for FTQ-NEG (3.64 μg/cm²/h) was much higher compared to that of the pure drug (1.77 mg/cm²/h). The results were further confirmed by confocal microscopy studies, which proved the improved penetration of thymoquinone through mice skin. Long-term stability studies of the purported formulation were also conducted and yielded satisfactory results.

QbD Approach towards Robust Design Space for Flutamide/PiperineSelf-Emulsifying Drug Delivery System with Reduced Liver Injury

Flutamide which is used to treat prostate cancer and other diseases induces liver damage during and after the therapy. The aim of this study was to develop a flutamide/piperineco-loaded self-emulsifying drug delivery system (FPSEDDS) to inhibit flutamide-induced liver injury by utilizing piperine as a metabolic inhibitor. The development of SEDDS was carried out following a quality by design (QbD) approach. The risk assessment study was performed to identify critical quality attributes (CQAs) and critical material attributes (CMAs)/critical process parameters (CPPs). I-optimal mixture design was executed with three CMAs as the independent variables and CQAs as the dependable variables. The effectiveness of optimized SEDDS to circumvent flutamide-induced hepatotoxicity was assessed in mice. The numerical optimization suggested an optimal formulation with a desirability value of 0.621, using CQAs targets as optimization goals with 95% prediction intervals (α = 0.05). The optimal formulation exhibited the grade A SEDDS characteristics with the guarantee of high payloads in self-formed oily droplets. The design space was also obtained from the same optimization goals. All CQA responses of verification points were found within the 95% prediction intervals of the polynomial models, indicating a good agreement between actual versus predicted responses within the design space. These obtained responses also passed CQAs acceptance criteria. Finally, hematoxylin-eosin staining revealed the minimal flutamide-induced hepatotoxicity from the optimal SEDDS formulation as compared to the control and flutamide/piperine normal suspension. We demonstrate that the piperine containing optimized SEDDS formulation developed by QbD significantly reduces the flutamide-induced liver injury in mice.

QbD enabled optimization of solvent shifting method for fabrication of PLGA-based nanoparticles for promising delivery of Capecitabine for antitumor activity

The key objective of the current research was to fabricate and optimize Capecitabine (Cap)-loaded [poly(lactic-co-glycolic acid)] PLGA-based nanoparticles (NPs) by enabling quality by design (QbD) approach for enhancing antitumor activity by promising delivery of the drug at the colonic site. The current research was based on fabricating PLGA-based nanoparticles along with Eudragit S100 as enteric polymer employing solvent shifting method followed by optimization using QbD approach. This approach was found to be useful for understanding the multiple factors and their interaction influencing the product by utilizing Design of Experiment (DOE). Box-Behnken design (BBD) was adopted to achieve the required critical quality attributes (CQAs), i.e., minimizing particle size, maximizing entrapment efficiency, and minimizing PDI value. The optimized nanoparticles were lyophilized and characterized by FT-IR, DSC, TEM, DLS, MTT assay using HT-29 cell lines, and in vivo pharmacokinetic studies. The optimized PLGA-based nanoparticles were found to possess average particle size, PDI, zeta potential, and entrapment efficiency of 195 nm, 0.214, -6.65 mV, and 65%, respectively. TEM analysis revealed the spherical nature of nanoparticles. The FT-IR and DSC studies revealed no interaction. The bioavailability of Cap-loaded nanoparticles was found to be two fold increased than the pure drug, and also, it exhibited significantly more cytotoxic to tumor cells as compared to pure drug as confirmed by MTT assay. The optimized PLGA-based nanoparticles found to possess enhanced bioavailability and significantly more cytotoxic potential as compared to pure drug.

Self-Nano-Emulsifying Drug-Delivery Systems: From the Development to the Current Applications and Challenges in Oral Drug Delivery

Approximately one third of newly discovered drug molecules show insufficient water solubility and therefore low oral bio-availability. Self-nano-emulsifying drug-delivery systems (SNEDDSs) are one of the emerging strategies developed to tackle the issues associated with their oral delivery. SNEDDSs are composed of an oil phase, surfactant, and cosurfactant or cosolvent. SNEDDSs characteristics, their ability to dissolve a drug, and in vivo considerations are determinant factors in the choice of SNEDDSs excipients. A SNEDDS formulation can be optimized through phase diagram approach or statistical design of experiments. The characterization of SNEDDSs includes multiple orthogonal methods required to fully control SNEDDS manufacture, stability, and biological fate. Encapsulating a drug in SNEDDSs can lead to increased solubilization, stability in the gastro-intestinal tract, and absorption, resulting in enhanced bio-availability. The transformation of liquid SNEDDSs into solid dosage forms has been shown to increase the stability and patient compliance. Supersaturated, mucus-permeating, and targeted SNEDDSs can be developed to increase efficacy and patient compliance. Self-emulsification approach has been successful in oral drug delivery. The present review gives an insight of SNEDDSs for the oral administration of both lipophilic and hydrophilic compounds from the experimental bench to marketed products.

Lyophilized SLN of Cinnacalcet HCl: BBD enabled optimization, characterization and pharmacokinetic study

Objective: The objective of the present research is to formulate solid lipid nanoparticles (SLN) of CH to improve its oral bioavailability.Methods: Cinnacalcet hydrochloride (CH) exhibits poor oral bioavailability of 20 to 25% because of low aqueous solubility and first pass metabolism. The SLN formulations were optimized using Box-Behnken Design. SLN formulation was prepared using hot homogenization technique followed by ultra-sonication and evaluated. The optimized SLN formulation was lyophilized to improve the stability of the formulation further.Results: Compritol 888 ATO (COM), Soya lecithin (SL) and poloxamer 188 (POL) were selected as lipid, surfactant and co-surfactant respectively. For optimistaion, the desirable goal was fixed for variour responses vis-a-vis entrapment efficiency (EE), particle size (PS) and (time taken for diffusion of 85% drug) T85%. The optimized single dose of SLN obtained using BBD consisting of 30 mg of CH, 100 mg of COM, 150 mg of SL and 0.1% w/v of POL. The pharmacokinetic study revealed that optimized SLN and lyophilized SLN were found to increase the oral bioavailability nearly two times compared to an aqueous suspension of pure drug.Conclusion: Thus lyophilized SLN formulation explicated the potential of lipid-based nanoparticles as a potential carrier in improving the oral delivery and stability of CH.

Formulation and development of floating multiple-unit minitablets of Nimodipine without using a gas-generating agent: in vitro and in vivo characterization

Background

Floating drug delivery systems have been reported for different active pharmaceutical ingredients as single-unit tablets with gas-generating agents. In this present research, the formulation of floating multiple-unit minitablets of Nimodipine without using gas-generating agent was attempted with an objective of increased residence time, sustain-release and improved oral bioavailability. Solid dispersion with different ratios (1:0.5, 1:1, 1:1.5, 1:2, 1:2.5) of drug with the lipophilic carrier such as Compritol ATO 888, Gelucire 43/01, G39/01 and Precirol ATO 05 was formulated using melt granulation technique. The adsorbent Sylysia 350 to lipophilic carrier is maintained at 1:1. The granules were compressed into minitablets weighing 15 mg and were filled into a ‘0’ size capsule.

Results

Differential scanning calorimetry study justified no interaction of the drug with excipients. The formulations which exhibited desirable flow property, floating lag time less than 1 min and floating time of 12 h were further characterized for various post-compression parameters. The optimized single-dose (capsule) of floating multiple-unit minitablets of Nimodipine consisting of 60 mg of drug, 120 mg of G43/01 and 120 mg of Sylysia 350 showed an average of floating lag time within 24.48 s, floating time of 14.32 h and sustained-release up to 12 h. Pharmacokinetic study of the optimized formulation (F9) showed nearly 2.5 times increase in area under the curve with increased residence time in comparison to aqueous suspension of Nimodipine. The stability study revealed no significant change in various parameters before and after storage.

Conclusion

Hence, gelucire 43/01-based multiple-unit minitablets of Nimodipine can be considered a promising approach for sustaining the drug release with gastric retention for 12 h without using gas-generating agent.

Enhanced oral bioavailability and anti-diabetic activity of canagliflozin through a spray dried lipid based oral delivery: a novel paradigm

AIM

Canagliflozin (CFZ), a novel SGLT II antagonist, exhibits erratic absorption after oral administration. The current study entails development and evaluation of spray dried lipid based formulation (solid SMEDDS) for enhancing oral bioavailability and anti-diabetic activity of CFZ.

METHODS

Solid SMEDDS developed through spray drying containing Neusilin US2 as an adsorbent. The formed solid SMEDDS were characterized for physicochemical and solid state attributes. Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) were used to confirm the spherical morphology. In vitro dissolution, ex vivo permeability and in vivo pharmacokinetic studies were conducted to determine the release rate, permeation rate and absorption profile of CFZ, respectively. Pharmacodynamic studies were done as per standard protocols.

RESULTS

The optimized solid SMEDDS exhibited acceptable practical yield and flow properties and is vouched with enhanced amorphization, nanoparticulate distribution and acceptable drug content. The spherical morphology of solid SMEDDS and reconstituted SMEDDS were confirmed in SEM and TEM, respectively. In vitro dissolution studies revealed multi-fold release behavior in CFZ in various dissolution media, whereas, remarkable permeability was observed in jejunum segment of rat intestine. Pharmacokinetic studies of CFZ in solid SMEDDS demonstrated 2.53 and 1.43 fold enhancement in C_max and 2.73 and 1.98 fold in AUC _0-24h, as compared to pure API and marketed formulation, respectively. Pharmacological evaluation of solid SMEDDS revealed enhanced anti-diabetic activity of CFZ through predominant SGLT II inhibition in rats, as evident from evaluation of biochemical levels, urinary glucose excretion studies and SGLT II expression analysis.

CONCLUSION

The current work describes significant improvement biopharmaceutical properties of CFZ in solid SMEDD formulation. Graphical abstract Graphical Abstract: Enhanced oral bioavailability and anti-diabetic activity of canagliflozin through a spray dried lipid based oral delivery: a novel paradigm.

Quality by Design Enabled Development of Oral Self-Nanoemulsifying Drug Delivery System of a Novel Calcimimetic Cinacalcet HCl Using a Porous Carrier: In Vitro and In Vivo Characterisation

In this present research, work quality by design-enabled development of cinacalcet HCl (CH)-loaded solid self-nanoemulsifying drug delivery system (S-SNEDDS) was conducted using a porous carrier in order to achieve immediate drug release and better oral bioavailability. Capmul MCM (CAP), Tween 20 (TW 20) and Transcutol P (TRP) were selected as excipients. Cumulative % drug release at 30 min (Q30), emulsification times (ET), mean globule size (GS) and polydispersity index (PDI) were identified as critical quality attributes (CQAs). Factor mode effect analysis (FMEA) and Taguchi screening design were applied for screening of factors. The optimised single dose of S-SNEDDS obtained using Box-Behnken design (BBD) consisted of 30 mg of CH, 50 mg of CAP, 149.75 mg of TW 20, 55 mg of TRP and 260.75 mg of Neusilin US2. It showed an average Q30 of 97.6%, ET of 23.3 min, GS of 89.5 nm and PDI of 0.211. DSC, XRD and SEM predict the amorphous form of S-SNEDDS. In vivo pharmacokinetic study revealed better pharmacokinetic parameters of S-SNEDDS. The above study concluded that the optimised S-SNEDDS is effective to achieve the desired objective. Graphical Abstract.