Polyacrylic acid mediated targeted drug delivery nano-systems: A review

Recent progress of nanomaterials-based composite hydrogel sensors for human-machine interactions

Hydrogel-based flexible sensors have demonstrated significant advantages in the fields of flexible electronics and human-machine interactions (HMIs), including outstanding flexibility, high sensitivity, excellent conductivity, and exceptional biocompatibility, making them ideal materials for next-generation smart HMI sensors. However, traditional hydrogel sensors still face numerous challenges in terms of reliability, multifunctionality, and environmental adaptability, which limit their performance in complex application scenarios. Nanomaterial-based composite hydrogels significantly improve the mechanical properties, conductivity, and multifunctionality of hydrogels by incorporating conductive nanomaterials, thereby driving the rapid development of wearable sensors for HMIs. This review systematically summarizes the latest research progress on hydrogels based on carbon nanomaterials, metal nanomaterials, and two-dimensional MXene nanomaterials, and provides a comprehensive analysis of their sensing mechanisms in HMI, including triboelectric nanogenerator mechanism, stress-resistance response mechanism, and electrophysiological acquisition mechanism. The review further explores the applications of composite hydrogel-based sensors in personal electronic device control, virtual reality/augmented reality (VR/AR) game interaction, and robotic control. Finally, the current technical status and future development directions of nanomaterial composite hydrogel sensors are summarized. We hope that this review will provide valuable insights and inspiration for the future design of nanocomposite hydrogel-based flexible sensors in HMI applications.

Doping dependency of chitosan and PAA controlled CdSe quantum dots for catalytic and bactericidal behavior by inhibiting DNA gyrase and DHFR through molecular docking

The presence of toxic dyes in industrial waste dramatically diminishes the beneficial effects of remediation efforts. To overcome the hazardous impacts of dyes on biodiversity and environment, we integrated polymers into nanoparticles to substantially enhance their functionality and performance. 2 and 4 wt% of chitosan (CS) and 3 wt% of polyacrylic acid (PAA) doped cadmium selenide (CdSe) nanostructures (NSs) were prepared by co-precipitation approach. CdSe quantum dots (QDs) exhibit a narrow band gap energy, high solubility, and tunable properties, which are appropriate for redox reactions but show less adsorption and catalytic behavior. In this work, catalytic and antibacterial activities of CdSe QDs enhanced upon the integration of PAA due to increment in surface area confirmed by BET analysis. Furthermore, the addition of CS escalates the dye degradation and microbes evolve to the interaction of CdSe surface with the functional groups of CS. Highly doped CdSe shows significant inhibitory zones (8.65 to 9.30 mm) against gram-positive bacteria Staphylococcus aureus (S. aureus). In addition, the inhibitory activity of CS/PAA-CdSe nanostructures against DNA gyrase and dihydrofolate reductase (DHFR) in S. aureus was elucidated using molecular docking investigations, providing a rationale for their bactericidal action.

Self-enhanced PTX@HSA-HA loaded functionalized injectable hydrogel for effective local chemo-photothermal therapy in breast cancer

Breast cancer is a malignant tumor that poses a significant threat to women's health and single therapy fails to play a good oncological therapeutic effect. Synergistic treatment with multiple strategies may make up for the deficiencies and has gained widespread attention. In this study, sulfhydryl-modified hyaluronic acid (HA-SH) was covalently crosslinked with polydopamine (PDA) via a Michael addition reaction to develop an injectable hydrogel, in which PDA can be used not only as a matrix but also as a photothermal agent. After HSA and paclitaxel were spontaneously organized into nanoparticles via hydrophobic interaction, hyaluronic acid with low molecular weight was covalently linked to HSA, thus conferring effectively delivery. This photothermal injectable hydrogel incorporates PTX@HSA-HA nanoparticles, thereby initiating a thermochemotherapeutic response to target malignancy. Our results demonstrated that this injectable hydrogel possesses consistent drug delivery capability in a murine breast cancer model, collaborating with photothermal therapy to effectively suppress tumor growth, represented by low expression of Ki-67 and increasing apoptosis. Photothermal therapy (PTT) can effectively stimulate immune response by increasing IL-6 and TNF-α. Notably, the treatment did not elicit any indications of toxicity. This injectable hydrogel holds significant promise as a multifaceted therapeutic agent that integrates photothermal and chemotherapeutic modalities.

Research Progress of Application and Interaction Mechanism of Polymers in Mineral Flotation: A Review

Polymers are composed of many smaller units connected by covalent bonds, with higher molecular weight and larger molecular structure. Due to their economical efficiency and easy modification, researchers have discovered the potential of polymers as the flotation reagent in mineral processing, including the roles of depressant, flocculant, and frother. This paper provides a comprehensive review of the utilization of polymers in mineral flotation, emphasizing their current applications and mechanistic investigations. The study categorizes polymers into three types: natural polymers, modified polymers, and synthesized polymers. Detailed discussions include the polymers structures, functional properties, adsorption mechanisms and specific application examples of each reagent are shown in the main text, which will provide a vital reference for the development of highly efficient and environmentally friendly reagents in mineral flotation.

Alkaline-Responsive, Self-Healable, and Conductive Copolymer Composites with Enhanced Mechanical Properties Tailored for Wearable Tech

Despite significant advancements, current self-healing materials often suffer from a compromise between mechanical robustness and functional performance, particularly in terms of conductivity and responsiveness to environmental stimuli. Addressing this issue, the research introduces a self-healable and conductive copolymer, poly(ionic liquid-co-acrylic acid) (PIL-co-PAA), synthesized through free radical polymerization, and further optimized by incorporating thermoplastic polyurethane (TPU). This combination leverages the unique properties of each component, especially ion-dipole interactions and hydrogen bonds, resulting in a material that exhibits exceptional self-healing abilities and demonstrates enhanced mechanical properties and electrical conductivity. Moreover, the PIL-co-PAA/TPU films showcase alkaline-responsive behavior, a feature that broadens their applicability in dynamic environments. Through systematic characterization, including thermogravimetric analysis, tensile testing, and electrical properties measurements, the mechanisms behind the improved performance and functionality of these films are elucidated. The conductivities and ultimate tensile strength (σuts) of the PIL-co-PAA/TPU films regain 80% under 8 h healing process. To extend the applications for wearable devices, the self-healing properties of commercial cotton fabrics coated with the self-healable PIL-co-PAA are also investigated, demonstrating both self-healing and electrical properties. This study advances the understanding of self-healable conductive polymers and opens new avenues for their application in wearable technology.

Investigation of Silk Fibroin/Poly(Acrylic Acid) Interactions in Aqueous Solution

Silk fibroin (SF) is a protein with many outstanding properties (superior biocompatibility, mechanical strength, etc.) and is often used in many advanced applications (epidermal sensors, tissue engineering, etc.). The properties of SF-based biomaterials may additionally be tuned by SF interactions with other (bio)polymers. Being a weak amphoteric polyelectrolyte, SF may form polyelectrolyte complexes (PECs) with other polyelectrolytes of opposite charge, such as poly(acrylic acid) (PAA). PAA is a widely used, biocompatible, synthetic polyanion. Here, we investigate PEC formation between SF and PAA of two different molecular weights (MWs), low and high, using various techniques (turbidimetry, zeta potential measurements, capillary viscometry, and tensiometry). The colloidal properties of SF isolated from Bombyx mori and of PAAs (MW, overlap concentration, the influence of pH on zeta potential, adsorption at air/water interface) were determined to identify conditions for the SF-PAA electrostatic interaction. It was shown that SF-PAA PEC formation takes place at different SF:PAA ratios, at pH 3, for both high and low MW PAA. SF-PAA PEC's properties (phase separation, charge, and surface activity) are influenced by the SF:PAA mass ratio and/or the MW of PAA. The findings on the interactions contribute to the future development of SP-PAA PEC-based films and bioadhesives with tailored properties.

Investigation of Ionic Polymers' Stabilizing and Flocculating Properties in Dispersed Activated Carbons Systems

Activated carbons obtained via the thermochemical treatment of lemon balm and mint herbs were applied for ionic polymers adsorption, which directly affects the stability of these types of aqueous suspensions. The examined carbonaceous materials were characterized by well-developed specific surface area (approximately 1000 m2/g) and mesoporous structure. The adsorbed amounts of anionic poly(acrylic acid) and cationic polyethyleneimine from one-component solutions reached significant levels, but the efficiency of adsorption of these compounds from binary solutions slightly decreased. Moreover, the ionic polymers showed stabilizing properties towards the activated carbons suspensions. For both adsorbents, the most stable suspensions were systems containing both types of polymeric macromolecules with different ionic characters. This was due to the occurrence of electrosteric and depletion stabilization mechanisms. Furthermore, the zeta potential and size of particle aggregates were also influenced by the presence of polymers in the aqueous suspensions of activated carbons.

Material and Design Toolkit for Drug Delivery: State of the Art, Trends, and Challenges

The nanomaterial and related toolkit have promising applications for improving human health and well-being. Nanobased drug delivery systems use nanoscale materials as carriers to deliver therapeutic agents in a targeted and controlled manner, and they have shown potential to address issues associated with conventional drug delivery systems. They offer benefits for treating various illnesses by encapsulating or conjugating biological agents, chemotherapeutic drugs, and immunotherapeutic agents. The potential applications of this technology are vast; however, significant challenges exist to overcome such as safety issues, toxicity, efficacy, and insufficient capacity. This article discusses the latest developments in drug delivery systems, including drug release mechanisms, material toolkits, related design molecules, and parameters. The concluding section examines the limitations and provides insights into future possibilities.

Calcium Orthophosphate in Liposomes for Co-Delivery of Doxorubicin Hydrochloride/Paclitaxel in Breast Cancer

Nanoparticles (NPs) show great advantages in cancer treatment by enabling controlled and targeted delivery of payloads to tumor sites through the enhanced permeability and retention (EPR) effect. In this study, highly effective pH-responsive and biodegradable calcium orthophosphate@liposomes (CaP@Lip) NPs with a diameter of 110 ± 20 nm were designed and fabricated. CaP@Lip NPs loaded with hydrophobic paclitaxel and hydrophilic doxorubicin hydrochloride achieved excellent drug loading efficiencies of 70 and 90%, respectively. Under physiological conditions, the obtained NPs are negatively charged. However, they switched to positively charged when exposed to weak acidic environments by which internalization can be promoted. Furthermore, the CaP@Lip NPs exhibit an obvious structural collapse under acid conditions (pH 5.5), which confirms their excellent biodegradability. The "proton expansion" effect in endosomes and the pH-responsiveness of the NPs facilitate the release of encapsulated drugs from individual channels. The effectiveness and safety of the drug delivery systems were demonstrated through in vitro and in vivo experiments, with a 76% inhibition of tumor growth. These findings highlight the high targeting ability of the drug-loaded NPs to tumor sites through the EPR effect, effectively suppressing tumor growth and metastasis. By combining CaP NPs and liposomes, this study not only resolves the toxicity of CaP but also enhances the stability of liposomes. The CaP@Lip NPs developed in this study have significant implications for biomedical applications and inspire the development of intelligent and smart drug nanocarriers and release systems for clinical use.

Intrinsically Disordered Synthetic Polymers in Biomedical Applications

In biology and medicine, intrinsically disordered synthetic polymers bio-mimicking intrinsically disordered proteins, which lack stable three-dimensional structures, possess high structural/conformational flexibility. They are prone to self-organization and can be extremely useful in various biomedical applications. Among such applications, intrinsically disordered synthetic polymers can have potential usage in drug delivery, organ transplantation, artificial organ design, and immune compatibility. The designing of new syntheses and characterization mechanisms is currently required to provide the lacking intrinsically disordered synthetic polymers for biomedical applications bio-mimicked using intrinsically disordered proteins. Here, we present our strategies for designing intrinsically disordered synthetic polymers for biomedical applications based on bio-mimicking intrinsically disordered proteins.

Preparation and Characterization of Poly(Acrylic Acid)-Based Self-Healing Hydrogel for 3D Shape Fabrication via Extrusion-Based 3D Printing

The three-dimensional (3D) printing of hydrogel is an issue of interest in various applications to build optimized 3D structured devices beyond 2D-shaped conventional structures such as film or mesh. The materials design for the hydrogel, as well as the resulting rheological properties, largely affect its applicability in extrusion-based 3D printing. Here, we prepared a new poly(acrylic acid)-based self-healing hydrogel by controlling the hydrogel design factors based on a defined material design window in terms of rheological properties for application in extrusion-based 3D printing. The hydrogel is designed with a poly(acrylic acid) main chain with a 1.0 mol% covalent crosslinker and 2.0 mol% dynamic crosslinker, and is successfully prepared based on radical polymerization utilizing ammonium persulfate as a thermal initiator. With the prepared poly(acrylic acid)-based hydrogel, self-healing characteristics, rheological characteristics, and 3D printing applicability are deeply investigated. The hydrogel spontaneously heals mechanical damage within 30 min and exhibits appropriate rheological characteristics, including G'~1075 Pa and tan δ~0.12, for extrusion-based 3D printing. Upon application in 3D printing, various 3D structures of hydrogel were successfully fabricated without showing structural deformation during the 3D printing process. Furthermore, the 3D-printed hydrogel structures exhibited excellent dimensional accuracy of the printed shape compared to the designed 3D structure.