Effect of chromium doping on Na3V2(PO4)2F3@C as promising positive electrode for sodium-ion batteries

Tailoring of High-Valent Sn-Doped Porous Na3V2(PO4)3/C Nanoarchitechtonics: An Ultra High-Rate Cathode for Sodium-Ion Batteries

NASICON structured Na3V2(PO4)3 (NVP) has captured enormous attention as a potential cathode for next-generation sodium-ion batteries (SIBs), owing to its sturdy crystal structure and high theoretical capacity. Nonetheless, its poor intrinsic electronic conductivity has led to inferior electrochemical performance in terms of rate capability and long cycling performance. To address this problem, a combined strategy is adopted, such as (1) carbon coating and (2) high valent Sn4+ ion doping in the lattice site of vanadium in the NVP cathode. Carbon coating can effectively enhance the surface electronic conductivity, wherein high-valent Sn4+ improves the bulk intrinsic electronic conductivity of the materials. Moreover, Sn is a well-known alloying/dealloying type anode for SIBs; thus, doping of such metal in cathode materials will assume the role of structure stabilizing pillars and establishing high-performing cathode materials. Herein, Na3V2-xSnx(PO4)3/C (denoted as Sn(x)-NVP/C, where x = 0.00, 0.03, 0.05, 0.07, 0.1) were synthesized via sol-gel route, followed by calcination at 800 °C. XRD, Raman, XPS, and electron microscopy data confirmed the high purity of the synthesized cathode. The optimized Sn(0.07)-NVP/C exhibited excellent electrochemical performance in terms of high rate capability and long cycling performance, a high appreciable capacity of 98 mAh g-1 with capacity retention of 85% after 500 cycles. Similarly, at a high current of 20C, it is still able to deliver a stable capacity of 76 mAh g-1 with 85% capacity retention after 3000 cycles. The rate capability study indicates the high current tolerance of Sn(0.07)-NVP/C up to 70 C with a capacity delivery of 55 mAh g-1. It is worth mentioning that CV and EIS analysis for Sn(0.07)-NVP/C cathode displayed minimum voltage polarization and enhanced diffusion coefficient. Moreover, DFT calculation also proved that the electronic and ionic conductivity of NVP is promoted by Sn doping. Hence, the present results demonstrated that Sn(0.07)-NVP/C is considered a promising cathode for sodium-ion battery application.

Na3V2(PO4)3-decorated Na3V2(PO4)2F3 as a high-rate and cycle-stable cathode material for sodium ion batteries

Since Na3V2(PO4)3 (NVP) possesses modest volume deformation and three-dimensional ion diffusion channels, it is a potential sodium-ion battery cathode material that has been extensively researched. Nonetheless, NVP still endures the consequences of poor electronic conductivity and low voltage platforms, which need to be further improved. On this basis, a high voltage platform Na3V2(PO4)2F3 was introduced to form a composite with NVP to increase the energy density. In this study, the sol-gel technique was successfully used to synthesize a Na3V2(PO4)2.75F0.75/C (NVPF·3NVP/C) composite cathode material. The citric acid-derived carbon layer was utilized to construct three-dimensional conducting networks to effectively promote ion and electron diffusion. Furthermore, the composites' synergistic effect accelerates the quick ionic migration and improves the kinetic reaction. In particular, NVP as the dominant phase enhanced the structural stability and significantly increased the capacitive contribution. Therefore, at 0.1C, the discharge capacity of the modified NVPF·3NVP/C composite is 120.7 mA h g-1, which is greater than the theoretical discharge capacity of pure NVP (118 mA h g-1). It discharged 110.9 mA h g-1 of reversible capacity even at an elevated multiplicity of 10C, and after 200 cycles, it retained 64.1% of its capacity. Thus, the effort produced an optimized NVPF·3NVP/C composite cathode material that may be used in the sodium ion cathode.

Vanadium fluorophosphates: advanced cathode materials for next-generation secondary batteries

Next-generation secondary batteries including sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs) are considered the most promising candidates for application to large-scale energy storage systems due to their abundant, evenly distributed and cost-effective sodium/potassium raw materials. The electrochemical performance of SIBs (PIBs) significantly depends on the inherent characteristics of the cathode material. Among the wide variety of cathode materials, sodium/potassium vanadium fluorophosphate (denoted as MVPF, M = Na and K) composites are widely investigated due to their fast ion transportation and robust structure. However, their poor electron conductivity leads to low specific capacity and poor rate capacity, limiting the further application of MVPF cathodes in large-scale energy storage. Accordingly, several modification strategies have been proposed to improve the performance of MVPF such as conductive coating, morphological regulation, and heteroatomic doping, which boost the electronic conductivity of these cathodes and enhance Na (K) ion transportation. Furthermore, the development and application of MVPF cathodes in SIBs at low temperatures are also outlined. Finally, we present a brief summary of the remaining challenges and corresponding strategies for the future development of MVPF cathodes.

Doping Regulation in Polyanionic Compounds for Advanced Sodium-Ion Batteries

It has long been the goal to develop rechargeable batteries with low cost and long cycling life. Polyanionic compounds offer attractive advantages of robust frameworks, long-term stability, and cost-effectiveness, making them ideal candidates as electrode materials for grid-scale energy storage systems. In the past few years, various polyanionic electrodes have been synthesized and developed for sodium storage. Specifically, doping regulation including cation and anion doping has shown a great effect in tailoring the structures of polyanionic electrodes to achieve extraordinary electrochemical performance. In this review, recent progress in doping regulation in polyanionic compounds as electrode materials for sodium-ion batteries (SIBs) is summarized, and their underlying mechanisms in improving electrochemical properties are discussed. Moreover, challenges and prospects for the design of advanced polyanionic compounds for SIBs are put forward. It is anticipated that further versatile strategies in developing high-performance electrode materials for advanced energy storage devices can be inspired.

Particle nanosizing and coating with an ionic liquid: two routes to improve the transport properties of Na3V2(PO4)2FO2

Na₃V₂(PO₄)₂FO₂ is a promising candidate for practical use as a positive electrode material in Na-ion batteries thanks to its high voltage and excellent structural stability upon cycling. However, its limited intrinsic transport properties limit its performance at fast charge/discharge rates. In this work, two efficient approaches are presented to optimize the electrical conductivity of the electrode material: particle nanosizing and particle coating with an ionic liquid (IL). The former reveals that particle downsizing from micrometer to nanometer range improves the electronic conductivity by more than two orders of magnitude, which greatly improves the rate capability without affecting the capacity retention. The second approch dealing with an original surface modification by applying an IL coating strongly enhances the ionic mobility and offers new perspectives to improve the energy storage performance by designing the electrode materials' surface composition.

Optimizing the Electrolyte Systems for Na3 (VO1-x PO4 )2 F1+2x (0≤x≤1) Cathode and Understanding their Interfacial Chemistries Towards High-Rate Sodium-Ion Batteries

Sodium-ion batteries (SIBs) have been regarded as promising alternative to lithium-ion batteries (LIBs) due to the abundance of sodium resource and cost-effectiveness of electrode manufacture. Na₃ (VO_1-x PO₄ )₂ F_1+2x (0≤x≤1, NVPF_1+2x ) polyanionic material, a potential high-energy-density cathode, has shown superior electrochemical performances for advanced SIBs due to its high working voltage (>3.9 V). Electrolyte composition, which plays an indispensable and critical role in determining the cycle stability and the electrode/electrolyte interfacial properties, is of great significance to possess good compatibility with electrode materials, especially the NVPF_1+2x cathode. Here, different electrolyte systems, including commonly used 1.0 m NaPF₆ /diglyme (NP-005), 1.0 m NaPF₆ /propylene carbonate (PC)/5.0 % fluoroethylene carbonate (FEC) (NP-009), 1.0 m NaClO₄ /ethylene carbonate-dimethyl carbonate (EC-DMC; 1 : 1 v/v)/5.0 % FEC (NC-019), and 1.0 m NaClO₄ /PC (NC-013), were systematically investigated and compared for NVPF_1+2x cathode. NVPF_1+2x electrode with NP-009 electrolyte showed a superior cycle stability and rate capability at 1-10 C (1 C=130 mA g^-1 ) than that of NC-019 and NC-013, while NVPF_1+2x electrode with NP-005 electrolyte showed the best high-rate capability at 20-50 C. The cathode/electrolyte interphase (CEI), post-mortem electrode morphology, and electrochemical kinetic characteristics of NVPF_1+2x electrode with different electrolytes were profoundly investigated and compared. It demonstrated that NVPF_1+2x electrode with NP-005 exhibited a thin, efficient, and NaF-rich CEI layer with less polarization, smaller interfacial resistance, and faster Na⁺ diffusion than that of NC-019 and NC-013 since they suffered from a thick, overgrown CEI layer due to the consecutive decomposition of FEC, NaClO₄ , and/or linear DMC, resulting in inferior electrochemical performance. This work provides new insights for the battery community to gain more comprehensive understanding about the compatibility and interfacial chemistry between different electrolyte systems and various electrode surfaces.

Manipulating the Phase Compositions of Na3(VO1-xPO4)2F1+2x (0 ≤ x ≤ 1) and Their Synergistic Effects with Reduced Graphene Oxide toward High-Rate Sodium-Ion Batteries

Sodium-ion batteries (SIBs) have aroused intense research and academic interest due to the natural abundance and cost-effectiveness of sodium resources. Presently, cathode materials based on the Na₃(VO_1-xPO₄)₂F_1+2x (0 ≤ x ≤ 1, NVPF_1+2x) polyanionic framework show intriguing electrochemical performances toward practical and advanced SIBs due to its high operating voltage (>3.9 V) and high energy density (>500 Wh kg^-1). Different from conventional approaches focusing on delicate morphology design, metal ion substitution, and the conductive matrix's incorporation to overcome the low intrinsic electrical conductivity, here we adopt a one-step microwave-assisted hydrothermal approach to optimize the electrochemical performances of NVPF_1+2x via manipulating its phase compositions with different vanadium sources and distinguishing the tetragonal (I4/mmm) symmetry of the Na₃(VOPO₄)₂F phase from the orthorhombic symmetry (Amam) of the Na₃V₂(PO₄)₂F₃ phase. The introduction of the conductive reduced graphene oxide (rGO) framework and its impacts on the phase compositions were systematically investigated. The rGO framework with different calcination temperature can alter the phase composition and the electrical conductivity of NVPF_1+2x cathodes significantly, thus having a great impact on their electrochemical performances. Galvanostatic charge/discharge, cyclic voltammetry, electrochemical impedance spectroscopy, and the galvanostatic intermittent titration technique are adopted to compare their electrode polarization and kinetics difference and show that NVPF@rGO-600 °C possesses a high rate, small polarization, and fast kinetics electrochemical properties. This work provides new insights into manipulating phase compositions of the NVPF_1+2x cathode by modulating the synthesis conditions and revealing their synergistic effect with a rGO conductive framework toward a superior rate capability and more realistic practical applications for SIBs.