Electrochemical advanced oxidation discoloration and removal of three brown diazo dyes used in the tannery industry

Recovery mechanism of heterotrophic ammonia assimilation system under chromium hexavalent stress

Heterotrophic ammonia assimilation (HAA), an innovative technology for high-salinity wastewater treatment, demonstrates self-recovery capability following Cr (VI) stress. This study investigated the inhibitory effects and self-restoration mechanisms of Cr (VI) at various stress levels. The removal efficiencies of NH4+-N and Cr (VI) in the HAA gradually decreased with increasing influent Cr (VI) concentration. Exposure to Cr (VI) increased the amounts of high-molecular-weight proteins in soluble microbial products and stimulated the generation of extracellular polymeric substances. Heterotrophic functional microorganisms with Cr (VI) tolerance, such as Marinobacter and Planktosalinus, were enriched. An assimilation pathway gene (glnA) and a Cr (VI)-related gene (atoB) were also upregulated. After ceasing Cr (VI) addition, the HAA system demonstrated a 17.1 % increase in the removal efficiency of NH4+-N, which was attributable to its self-recovery ability. This study provides a scientific and theoretical foundation for the HAA process in resisting the impact of heavy-metal-containing wastewater and self-recovery.

A review of the degradation of antibiotic contaminants using advanced oxidation processes: modification and application of layered double hydroxides based materials

In recent years, the treatment of organic pollutants has become a global concern due to the threat to human health posed by emerging contaminants, especially antibiotic contamination. Advanced oxidation processes (AOPs) can solve the organic pollution problem well, which have been identified as a promising solution for the treatment of hard-to-handle organic compounds including antibiotic contaminants. Layered double hydroxides (LDHs) are excellent catalysts because of their flexible tunability, favorable thermal stability, abundant active sites, and facile exchangeability of intercalated anions. This paper conducted a systematic review of LDHs-based materials used for common antibiotic removal by three significant AOP technologies, such as photocatalysis, the Fenton-like processes, and peroxymonosulfate catalysis. The degradation effects studied in various studies were reviewed, and the mechanisms were discussed in detail based on the type of AOPs. Finally, the challenges and the application trends of AOPs that may arise were prospected. The aim of this study is to suggest ways to provide practical guidance for the screening and improvement of LDH materials and the rational selection of AOPs to achieve efficient antibiotic degradation. This could lead to the development of more efficient and environmentally friendly materials and processes for degrading antibiotics, with significant implications for our ecological conservation by addressing water pollution.

Assessing the electrochemical degradation of reactive orange 84 with Ti/IrO2-SnO2-Sb2O5 anode using electrochemical oxidation, electro-Fenton, and photoelectro-Fenton under UVA irradiation

Today, water shortage problems around the world have forced the search for new treatment alternatives, in this context, electrochemical oxidation technology is a hopeful process for wastewater treatment, although it is still needed exploration of new efficient and economically viable electrode materials. In this way, mixed metal oxide anodes look like promising alternatives but their preparation is still a significant point to study, searching for finding low-cost materials to improve electrocatalytic efficiencies. In an exploration of this kind of highly efficient materials, this work presents the results obtained using an MMO Ti/IrO2-SnO2-Sb2O5 anode. All the prepared anodes exhibited excellent physical and electrochemical properties. The electrochemical oxidation of 100 mL and 200 mg L-1 Reactive Orange 84 (RO 84) diazo dye was studied using 3 cm2 of such synthesized anodes by applying current densities of 25, 50, and 100 mA cm-2. Faster and more efficient electrochemical oxidation occurred at 100 mA cm-2 with 50 mM of Na2SO4 + 10 mM NaCl as supporting electrolyte at pH 3.0. The degradation and mineralization processes of the above solution were enhanced with the electro-Fenton process with 0.05 mM Fe2+ and upgraded using photoelectron-Fenton with UVA light. This process yielded 91% COD decay with a low energy consumption of 0.1137 kWh (g COD)-1 at 60 min. The evolution of a final carboxylic acid like oxalic was followed by HPLC analysis. The Ti/IrO2-SnO2-Sb2O5 is then an efficient and low-cost anode for the photoelectro-Fenton treatment of RO 84 in a chloride and sulfate media.

Coagulation-adsorption-oxidation for removing dyes from tannery wastewater

Dye removal from tannery wastewater is now a great concern given the ramifications for the environment in which the effluent ends up. Recently, the application of tannery solid waste as a byproduct to remove pollutants from tannery wastewater has garnered increasing attention. This study aims to extract biochar from tannery liming sludge for the removal of dye from wastewater. The activated (600 ºC) biochar was characterized by SEM (Scanning Electron Microscope), EDS (Energy Dispersive Spectroscopy), FTIR (Fourier Transform Infrared Spectroscopy), and surface area analysis utilizing the BET (Brunauer-Emmett-Teller) method and pH_pzc (point of zero charges) analysis. The surface area and pH_pzc of the biochar were determined as 9.29 m²/g and 8.7, respectively. The batch-wise coagulation-adsorption-oxidation was investigated for its efficacy in dye removal. The optimized conditions were as follows: the efficiency of dye, BOD (Biochemical Oxygen Demand) and COD (Chemical Oxygen Demand) were attained at 94.9%, 95.7% and 93.5%, respectively. SEM, EDS, and FTIR analyses before and after adsorption revealed that the derived biochar could adsorb dye from tannery wastewater. The adsorption behavior of the biochar fitted well to the Freundlich isotherm (R² = 0.9987) and Pseudo 2^nd order (R² = 0.9996) kinetic model. This investigation provides a new dimension for state-of-the-art utilization of tannery solid waste as a feasible strategy to remove dye from tannery wastewater.

Recent advances in the removal of dyes from wastewater using low-cost adsorbents

The presence of hazardous dyes in wastewater cause disastrous effects on living organisms and the environment. The conventional technologies for the remediation of dyes from water have several bottlenecks such as high cost and complex operation. This review aims to present a comprehensive outlook of various bio-sorbents that are identified and successfully employed for the removal of dyes from aqueous environments. The effect of physicochemical characteristics of adsorbents such as surface functional groups, pore size distribution and surface areas are critically evaluated. The adsorption potential at different experimental conditions of diverse bio-sorbents has been also explored and the influence of certain key parameters like solution pH, temperature, concentration of dyes, dosage of bio-sorbent and agitation speed is carefully evaluated. The mechanism of dyes adsorption, regeneration potential of the employed bio-sorbents and their comparison with other commercial adsorbents are discussed. The cost comparison of different adsorbents and key technological challenges are highlighted followed by the recommendations for future research.

Decontamination of wastewater containing contaminants of emerging concern by electrooxidation and Fenton-based processes - A review on the relevance of materials and methods

In recent years, there has been an increasingly growing interest regarding the use of electrochemical advanced oxidation processes (EAOPs) which are considered highly promising alternative treatment techniques for addressing environmental issues related to pollutants of emerging concern. In EAOPs, electrogenerated oxidizing agents, such as hydroxyl radical (HO^•), can react non-selectively with a wide range of organic compounds, degrading and mineralizing their structures to unharmful molecules like CO₂, H₂O, and inorganic ions. To this date, a broad spectrum of advanced electrocatalysts have been developed and applied for the treatment of compounds of interest in different matrices, specifically aiming at enhancing the degradation performance. New combined methods have also been employed as alternative treatment techniques targeted at circumventing the major obstacles encountered in Fenton-based processes, such as high costs and energy consumption, which still contribute significantly toward inhibiting the large-scale application of these processes. First, some fundamental aspects of EAOPs will be presented. Further, we will provide an overview of electrode materials which have been recently developed and reported in the literature, highlighting different anode and cathode structures employed in EAOPs, their main advantages and disadvantages, as well as their contribution to the performance of the treatment processes. The influence of operating parameters, such as initial concentrations, pH effect, temperature, supporting electrolyte, and radiation source, on the treatment processes were also studied. Finally, hybrid techniques which have been reported in the literature and critically assess the most recent techniques used for evaluating the degradation efficiency of the treatment processes.

Efficient electrochemical degradation of X-GN dye wastewater using porous boron-doped diamond electrode

Surface porous Ti substrates were obtained by electrodeposition-hot melt-alkali etching. Porous-Ti/BDD and flat-Ti/BDD electrodes were prepared for comparative study. The results of SEM, Raman, and XRD analyses show that the BDD films of these two electrodes had good uniformity and stable quality. The electrochemical window (EW) and electrochemical-active surface area (EASA) of the porous-Ti/BDD electrode is as high as 4.21 V and 22.78 cm² (11.39 cm²/cm²), respectively. Furthermore, the electrochemical catalytic performance and degradation mechanism of porous-Ti/BDD electrode as the anode were studied by the electrolysis of Active Orange dye X-GN (X-GN), and the optimal electrochemical degradation operating parameters were obtained. The results show that when the degradation time was 50 min, the X-GN was completely decolorized. The TOC removal rate reached 69.24%, and the energy consumption was 5.62 kWh m^-3. The contribution rate of •OH and SO₄^•- was calculated to be 91.40% and 1.26% by radical quenching experiments, respectively, indicating that the active substances in the degradation system were mainly •OH and SO₄^•-. The high specific surface characteristics of porous-Ti/BDD electrode enhanced its electrochemical oxidation advantages, and it showed a high degradation efficiency and low energy consumption for the treatment of X-GN simulated wastewater.

Fe3O4/Mn3O4/ZnO-rGO hybrid quaternary nano-catalyst for effective treatment of tannery wastewater with the heterogeneous electro-Fenton process: Process optimization

This study investigated chemical oxygen demand (COD) removal from tannery wastewater (TWW) with a novel Fe₃O₄/Mn₃O₄/ZnO-rGO heterogeneous electro Fenton (HEF) hybrid magnetically-separable nano-catalyst. The graphite cathode and Ti/IrO₂/RuO₂ anode were used in the HEF process. With aeration (2 L/min), in-situ H₂O₂ generation occurred. The nano-catalyst was characterized by XRD, XPS, DLS, FT-IR, ζ potential, SEM, TEM, and BET techniques in detail. The system was modelled with a central composite design and optimized numerically. The established model was adequate, valid, reliable, and reproducible to predict the COD removal efficiency. OH and O₂^- were the oxidative species responsible for organic matter degradation. The effect of different processes was investigated, and efficiency was ranked from high to low as; HEF > anodic oxidation-H₂O₂ > anodic oxidation > adsorption. Under the optimum conditions; pH: 3.5, current density: 7.37 mA/cm², reaction time: 79.43 min, and catalyst dose: 0.06 g/L, COD removal efficiency reached a maximum of 97.08%. The energy consumption and cost to remove 1 kg COD were 10.87 kWh and $1.41. The degradation of COD fitted the pseudo-first-order model. The nano-catalyst was stable and reusable with a minimum yield of 78.12% after 5 cycles.

A novel route to the synthesis of α-Fe2O3@C@SiO2/TiO2 nanocomposite from the metal-organic framework as a photocatalyst for water treatment

In this study, an attempt was made to synthesize metal-organic frameworks (MOFs) based magnetic iron particles as photocatalysts for textile dye wastewater. Improvement strategy was a novel two-step dry method without using conventional methods to eliminate the consumption of chemical reagents. First, the heterogeneous photocatalyst of Fe-MOFs derived magnetic carbon nanocomposite with carboxylic acid surface functional groups (Fe@C-COOH) was achieved. Next, the α-Fe₂O₃@C@SiO₂/TiO₂ was successfully synthesized followed by a sol-gel method to coat the SiO₂ shell and a solvothermal method to coat the surface of the intermediate TiO₂ particles. The as-synthesized nanocomposite materials were characterized and physicochemical analytical equipment. Further, the investigation on magnetic photocatalytic nanocomposite α-Fe₂O₃@C@SiO₂/TiO₂ performance of dye degradation and photocatalytic activity on Reactive yellow 145 (RY145), using as an indicator was conducted. The as-synthesized nanocomposite particles were characterized using X-ray powder diffraction (XRD), thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FT-IR), vibrating sample magnetometer (VSM), X-ray energy dispersive spectroscopy (EDX), and scanning electron microscopy (SEM) techniques. The structural characterization of the as-synthesized materials proved that these methods generate oxygen-containing functional groups, such as, -OH, -CO, and -COOH, which increases the polarity and hydrophilicity of the photocatalyst. The photocatalytic oxidation of RY145 dye under UVc light was discussed by the apparent first-order reaction rate and the kinetic model of the Langmuir-Hinshelwood followed a better fitting. The optimal performance of the composite is at pH = 2, 15 mg/100 mL of photocatalyst dose, 150 mg/L concentration of the dye RY145 at 25 °C temperature under UVc lamp irradiation for 90 min, and with the apparent reaction rate constant was 0.0165 min^-1. The thermodynamic analysis of activation parameters computed by the Eyring model and based on transition state theory (TST), an endothermic reaction with a positive value for Δ^‡H^o (50.16 kJ mol^-1) and a negative value for Δ^‡S^o (-153 J/mol K) both contribute toward achieving positive values for Δ^‡G^o and a nonspontaneous process. The proposed α-Fe₂O₃@C@SiO₂/TiO₂ demonstrated a high capability of photocatalytic degradation up to 97% after five successive cycles at the optimal condition compared to that of Fe₃O₄@C (18.74%) and Fe@C-COOH (77.9%) without reusability.

Electrocatalytic oxidation of low concentration cefotaxime sodium wastewater using Ti/SnO2-RuO2 electrode: Feasibility analysis and degradation mechanism

In this research, Ti/SnO₂-RuO₂ stable anode was successfully prepared by thermal decomposition method, and low concentration cefotaxime sodium (CFX) was degraded by green and sustainable electrocatalytic oxidation technology. The electrocatalytic activity and stability of the Ti/SnO₂-RuO₂ coating electrode were studied according to the polarization curve of oxygen and chlorine evolution. The effects of current density, initial concentration, pH, electrolyte concentration, and other technological parameters on the degradation efficiency were discussed. Orthogonal experiment results indicated that when the current density was 25 mA cm^-2, concentration of electrolyte was 5 mM and the pH value was 7, the best CFX removal rate of 86.33% could be obtained. The degradation efficiency of electrocatalytic oxidation was discussed through electrochemical analysis. Fourier transform infrared spectroscopy was used to analyze the different inlet and outlet stages before and after the degradation of CFX, and the possible degradation process was discussed. Therefore, the electrocatalytic oxidation of Ti/SnO₂-RuO₂ electrode was a clean and efficient technology, which could be widely used in the treatment of CFX wastewater.

Mitigation of tannery effluent with simultaneous generation of bioenergy using dual chambered microbial fuel cell

In this study, a dual chambered microbial fuel cell (MFC) was fabricated for the treatment of tannery wastewater with concurrent production of bio-energy. The tannery effluent acts as an anolyte and a synthetic electrolytic solution as the catholyte. Five electrochemically active bacteria from the biofilm were isolated that showed homology with Klebsiella quasipneumoniae, Klebsiella pneumoniae, Cloacibacterium normanese, Bacillus firmus and Pseudomonas reactans, using 16S rDNA analysis. The physiochemical studies of treated wastewater showcased the 88%, 74% and 94% reduction in COD, BOD and TDS level, respectively. The maximum voltage output and power density obtained using electroactive consortium in MFC was 940 mV and 7371 mW/cm³, respectively. The techno-economic feasibility of the bio-electrochemical system was studied for future bioprospecting. The present study reports a significant power generation with simultaneous effluent treatment up to a maximum of ∼85%, in a sustainable and eco-friendly manner.

Dye Removal Ability of Pure and Doped Graphitic Carbon Nitride

Background:

Rapid escalation in textile, paper, pesticides, pharmaceuticals and several other chemical based manufacturing industries due to amplification in human requirements have proportionately contributed to the extreme contamination of water ecosystem, resulted from the discharge of toxic pollutants from industries. Effluents from textile industries are comprised of coloured dyes like Rhodamine B, Methyl Orange, Methylene Blue and phenolic compounds which deserve special mention owing to their non-biodegradable, carcinogenic and severe detrimental nature. Urgent needs to ameliorate this fast declining environmental situation are of immense necessity in current scenario.

Objectives:

Objectives: In this regard, graphitic carbon nitride (GCN) is a distinguished material for water purification-based applications because of its exclusive characteristics making it highly prospective for degradation of toxic dyes from water by catalysis and adsorption techniques. GCN has been a material of conspicuous interest in recent times owing to its two dimensional sheets like structure with favourable surface area, and cost-effective synthesis approaches along with high production yield. This article presents a detail study of different aspects of GCN as a material of potential for water purification. Through extensive literature survey it has been shown that GCN is an effective material to be used in the fields of application. Several effective procedures like catalysis or adsorption for removal of dyes from water have been discussed with their basic science behind.

Conclusions:

This systematic effort shows that GCN can be considered to be one of the most efficient water purifier with further advantages arising from its easy and cost effective large scale synthesis.

Decomposition mechanism of hydroxychloroquine in aqueous solution by gamma irradiation

One of the advanced oxidative processes is gamma irradiation, an efficient technique for removing pesticides and pharmaceutical products. Radiolytic degradation leads to free radical’s formation, which facilitates molecular lesion and breaks the chemical bonds. The use of pharmaceutical compounds, such as hydroxychloroquine (HCQ), is increasing nowadays due to the Covid 19 pandemic situation. This study focused on gamma radiation-induced degradation of HCQ in aqueous solution. The degradation was monitored by High-Performance Liquid Chromatography (HPLC) using an Eclipse XDB-C18 column (150 × 3.0 mm, 3.5 µm) and a mobile phase composed of 94% water (phosphate buffer at pH = 3.6) and 6% acetonitrile, with a DAD detection at λ = 343 nm. The effect of different gamma radiation doses (from 0.05 to 3 kGy) was investigated. Chromatographic analysis shows that 1 kGy dose is effective to degrade completely HCQ at 20 ppm and following a first-pseudo-kinetic order with a dose constant corresponding to 4.2 kGy⁻¹. A comparison was done between gamma degradation and other methods. LC-QToF-MS/MS identified the intermediate products, and their kinetic constants were determined. A mechanism pathway was proposed for HCQ degradation under gamma irradiation.

Occurrence, transformation, bioaccumulation, risk and analysis of pharmaceutical and personal care products from wastewater: a review

Almost all aspects of society from food security to disease control and prevention have benefited from pharmaceutical and personal care products, yet these products are a major source of contamination that ends up in wastewater and ecosystems. This issue has been sharply accentuated during the coronavirus disease pandemic 2019 (COVID-19) due to the higher use of disinfectants and other products. Here we review pharmaceutical and personal care products with focus on their occurrence in the environment, detection, risk, and removal.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10311-022-01498-7.

Microbial fuel cell enhanced pollutants removal in a solid-phase biological denitrification reactor: System performance, bioelectricity generation and microbial community analysis

A novel electrochemical system of microbial fuel cell (MFC) coupled solid-phase denitrification biofilm reactor (DBR) system was established to explore the effect of simultaneous power generation and pollutant removal under different HRTs (Ⅰ:48 h; Ⅱ :24 h). The average removal rates of methyl orange, Cr (VI) and NO₃^--N in test group were 93.0, 98.6 and 95.5% within 60 days, while those were 53.1, 72.1 and 72.7% in control. The maximum power density was 61.2 (Ⅰ) and 16.1 mW/m² (Ⅱ), while average output voltage was 122 (Ⅰ) and 83.6 mV (Ⅱ). Components 1 and 2 in soluble microbial products were identified, and the humic-like and fulvic acid-like substances varied through different layers. Pseudomonas produced electricity in anode, while denitrified in denitrification layer. Importantly, symbiotic cooperation was absolutely dominant in network analysis of both anodic and denitrifying biofilms. MFC significantly improved DBR's ability to treatment co-polluted wastewater.

Photo-assisted electrochemical advanced oxidation processes for the disinfection of aqueous solutions: A review

Disinfection is usually the final step in water treatment and its effectiveness is of paramount importance in ensuring public health. Chlorination, ultraviolet (UV) irradiation and ozone (O3) are currently the most common methods for water disinfection; however, the generation of toxic by-products and the non-remnant effect of UV and O3 still constitute major drawbacks. Photo-assisted electrochemical advanced oxidation processes (EAOPs) on the other hand, appear as a potentially effective option for water disinfection. In these processes, the synergism between electrochemically produced active species and photo-generated radicals, improve their performance when compared with the corresponding separate processes and with other physical or chemical approaches. In photo-assisted EAOPs the inactivation of pathogens takes place by means of mechanisms that occur at different distances from the anode, that is: (i) directly at the electrode's surface (direct oxidation), (ii) at the anode's vicinity by means of electrochemically generated hydroxyl radical species (quasi-direct), (iii) or at the bulk solution (away from the electrode surface) by photo-electrogenerated active species (indirect oxidation). This review addresses state of the art reports concerning the inactivation of pathogens in water by means of photo-assisted EAOPs such as photo-electrocatalytic process, photo-assisted electrochemical oxidation, photo-electrocoagulation and cathodic processes. By focusing on the oxidation mechanism, it was found that while quasi-direct oxidation is the preponderant inactivation mechanism, the photo-electrocatalytic process using semiconductor materials is the most studied method as revealed by numerous reports in the literature. Advantages, disadvantages, trends and perspectives for water disinfection in photo-assisted EAOPs are also analyzed in this work.

Impacts of COVID-19 pandemic on the wastewater pathway into surface water: A review

With global number of cases 106 million and death toll surpassing 2.3 million as of mid-February 2021, the COVID-19 pandemic is certainly one of the major threats that humankind have faced in modern history. As the scientific community navigates through the overwhelming avalanche of information on the multiple health impacts caused by the pandemic, new reports start to emerge on significant ancillary effects associated with the treatment of the virus. Besides the evident health impacts, other emerging impacts related to the COVID-19 pandemic, such as water-related impacts, merits in-depth investigation. This includes strategies for the identification of these impacts and technologies to mitigate them, and to prevent further impacts not only in water ecosystems, but also in relation to human health. This paper has critically reviewed currently available knowledge on the most significant potential impacts of the COVID-19 pandemic on the wastewater pathway into surface water, as well as technologies that may serve to counteract the major threats posed, key perspectives and challenges. Additionally, current knowledge gaps and potential directions for further research and development are identified. While the COVID-19 pandemic is an ongoing and rapidly evolving situation, compiling current knowledge of potential links between wastewater and surface water pathways as related to environmental impacts and relevant associated technologies, as presented in this review, is a critical step to guide future research in this area.

Electro-Fenton, solar photoelectro-Fenton and UVA photoelectro-Fenton: Degradation of Erythrosine B dye solution

The treatment of Erythrosine B, selected as a model compound, has been comparatively studied by electrochemical advanced oxidation processes (EAOPs) such as electro-Fenton, UVA photoelectro-Fenton and solar photoelectro-Fenton at constant current density. Experiments are performed in a one-compartment cell with a BDD anode, and a commercial carbon felt cathode at pH = 3, treating a volume of 0.3 L in each test. The irradiation plays a crucial role in the increasing of hydroxyl radical production and in the recover of iron catalyst. A faster colour and COD removal degradation are achieved under the light application. UVA photoelectro-Fenton and solar photoelectro-Fenton processes allow degrading COD entirely in 90 min, while a conventional electro-Fenton does not reach 90% COD removal after 2 h. Energy consumptions are a substantial factor in process selection. Photo electro-Fenton with a UVA-100 W lamp has one of the best removal performance, but it becomes not suitable for application due to high energy demand, up to 515.6 kWh m^-3, and the UVA system requires the main fraction of this energy. Possible alternatives are proposed to contain costs: the first is the reduction of UVA lamp power to 25 W, maintaining a high-performance removal with an E_c decreasing to 187.9 kWh m^-3. Nevertheless, the lowest and competitive energy demands is obtained working with a solar photoelectro-Fenton system, where energy consumption are only related to the electrochemical process (20.9 kWh m^-3), and removal is complete.

Discoloration of azo dye Brown HT using different advanced oxidation processes

In this study, known combinations of Advanced Oxidation Processes (AOPs, namely Electro-Fenton (EF), Photo-Electro-Fenton (PEF), Electro-Oxidation (EO), and EO/Ozone (O₃) were compared for the discoloration of tannery industry azo dye Brown HT (BHT). The different AOPs were tested in a 0.160 L batch electrochemical stirred thank reactor using Boron Doped Diamond (BDD) electrodes. The influence of parameters such as the current density (j) and the initial BHT concentration were to exanimated on the efficiency of all the tested processes. The oxidation tendency of EF, and PEF were compared with those of EO and O₃, based on their efficiency for BHT discoloration, which resulted as PEF > EF > EO > O₃. The AOPs showing the best oxidation performance was PEF which, using Na₂SO₄ (0.05 M) electrolyte solution and Fe²⁺ (0.5 mM), pH 3.0, j = 71 mA cm^-2, and 500 rpm process, achieved 100% discoloration and 80% chemical oxygen demand (COD) abatement after 60 min of treatment for two initial BHT concentrations (50 and 80 mg L^-1). The process accounted for a current efficiency of 30% and energy consumption 2.25 kWh (g COD)^-1 through the discoloration test. The azo dye gradually degraded, yielding non-toxic oxalic, oxamic, and glyoxylic acid, whose Fe(III) complexes were quickly photolyzed.