Environmental impact from vermicomposting of organic waste in Kampala, Uganda

Application of life cycle assessment to high quality-soil conditioner production from biowaste

The recent large-scale urbanization and industrialization resulted in an impressive growth of solid waste generation worldwide. Organic fraction generally constitutes a large fraction of municipal solid waste and its peculiar chemical properties open to various valorization strategies. On this purpose, life cycle assessment is applied to an innovative industrial system that processes 18 kt/y of agricultural and livestock waste into a high-quality soil conditioner. The high-quality soil conditioner production system consists of a series of processes, including anaerobic digestion and vermicomposting, allowing the generation of a peat-like material with high carbon content, porosity, and water-holding capacity. The presence of a photovoltaic plant and a cogeneration plant, fed with the biogas produced in the anaerobic digestion, makes the system entirely self-sufficient from the national grid and generating a surplus of electricity of 1177MWh/y. The high-quality soil conditioner showed better environmental performances in 15 out of 18 impact categories when compared to alternative scenarios. In particular, the high-quality soil conditioner and the related biowaste management resulted in a carbon saving of around 397 kg CO2 eq/ton compared with a scenario involving the employment of peat in place of the high-quality soil conditioner and a traditional biowaste management, and 165 kg CO2 eq/ton compared with a scenario where cogeneration is replaced by biomethane upgrading. This study demonstrates the possibility of using organic waste as an environmentally sustainable and renewable source for energy and carbon to soil conditioning.

Vermicomposting technology - A perspective on vermicompost production technologies, limitations and prospects

The need for environmental sustainability while increasing the quantity, quality, and the rate of waste treatment to generate high-value environmental friendly fertilizer products is highly in demand. Vermicomposting is a good technology for the valorisation of industrial, domestic, municipal and agricultural wastes. Various vermicomposting technologies have been in use from time past to present. These technologies range from windrow, small - scale batch vermicomposting to large - scale continuous flow systems. Each of these processes has its own merits and demerits, necessitating advancement in the technology for efficient treatment of wastes. This work explores the hypothesis that the use of a continuous flow vermireactor system of a composite frame structure performs better than batch, windrow and other continuous systems operated in a single container. Following an in-depth review of the literature on vermicomposting technologies, treatment techniques, and reactor materials used, to explore the hypothesis, it was found that vermireactors operating in continuous flow fashion perform better in waste bioconversion than the batch and windrow techniques. Overall, the study concludes that batch techniques using plastic vermireactors predominate over the other reactor systems. However, the use of frame compartmentalized composite vermireactors performs considerably better in waste valorisation.

A Critical Review of Data Science Applications in Resource Recovery and Carbon Capture from Organic Waste

Municipal and agricultural organic waste can be treated to recover energy, nutrients, and carbon through resource recovery and carbon capture (RRCC) technologies such as anaerobic digestion, struvite precipitation, and pyrolysis. Data science could benefit such technologies by improving their efficiency through data-driven process modeling along with reducing environmental and economic burdens via life cycle assessment (LCA) and techno-economic analysis (TEA), respectively. We critically reviewed 616 peer-reviewed articles on the use of data science in RRCC published during 2002-2022. Although applications of machine learning (ML) methods have drastically increased over time for modeling RRCC technologies, the reviewed studies exhibited significant knowledge gaps at various model development stages. In terms of sustainability, an increasing number of studies included LCA with TEA to quantify both environmental and economic impacts of RRCC. Integration of ML methods with LCA and TEA has the potential to cost-effectively investigate the trade-off between efficiency and sustainability of RRCC, although the literature lacked such integration of techniques. Therefore, we propose an integrated data science framework to inform efficient and sustainable RRCC from organic waste based on the review. Overall, the findings from this review can inform practitioners about the effective utilization of various data science methods for real-world implementation of RRCC technologies.

The current status and challenges of biomass biorefineries in Africa: A critical review and future perspectives for bioeconomy development

Africa benefits from diverse biomasses that are rich in high-added value materials and precursors for energy, food, agricultural, cosmetic and medicinal applications. Many African countries are interested in valorizing biomasses to develop efficient and integrated biorefinery processes and their use for local and regional economic development. Thus, this report critically reviews the current status of African biomass richness, its diversity, and potential applications. Moreover, particular attention is given to bioenergy production, mainly by biological and thermochemical conversion processes. This also includes biomass valorization in agriculture, particularly for the production of plant-based biostimulants, which are a potential emerging agri-input sector worldwide. This study points out that even though several processes for biofuel, biogas, biofertilizer and biostimulant production have already been established in Africa, their development on a larger scale remains limited. This study also reports the different socioeconomic and political aspects of biomass applications, along with their challenges, opportunities, and future research perspectives, to promote concrete technologies transferable into an industrial level.

Urban Municipal Solid Waste management: Modeling air pollution scenarios and health impacts in the case of Accra, Ghana

Despite the clear link between air pollution and health, research to investigate the relationship between municipal solid waste management and air pollution and health has not been prioritized. Such research may generate scientific information that would help reduce population exposure to air pollutants. This paper examines the case study of Accra in Ghana, a city dealing with serious waste management problems. The paper proposes a methodology to estimate the impact of waste management on urban air pollution and health. The analysis is described in the following four steps: (1) collecting data on the waste sector; (2) modeling the emissions arising from waste management; (3) transforming emissions to concentration values and (4) estimating the burdens on health. The assessment has been conducted using the CCAC SWEET tool and WHO AirQ+. The method presented can be used in different locations, depending on data availability, when analyzing the impact of and potential changes to waste sector policies. The results of this health impact assessment indicate that, based on the emissions of PM_2.5 from the waste sector in Accra, a change from the business-as-usual to more sustainable options would reduce air pollutants emissions and avert 120 premature deaths in 2030. Levels of air pollution in Accra are significant and interventions to reduce PM_2.5 exposure should be promoted. The detailed analysis of the current situation provides suggestions for waste management policies in terms of impacts on health and ideas to reconsider the waste policies in Accra.

Status of Life Cycle Assessment (LCA) in Africa

Life cycle assessment (LCA) has received attention as a tool to evaluate the environmental impacts of products and services. In the last 20 years, research on the topic has increased, and now more than 25,000 articles are related to LCA in scientific journals databases such as the Scopus database; however, the concept is relatively new in Africa, where the number of networks has been highlighted to be very low when compared to the other regions. This paper focuses on a review of life cycle assessments conducted in Africa over the last 20 years. It aims at highlighting the current research gap for African LCA. A total of 199 papers were found for the whole continent; this number is lower than that for both Japan and Germany (more than 400 articles each) and nearly equal to developing countries such as Thailand. Agriculture is the sector which received the most attention, representing 53 articles, followed by electricity and energy (60 articles for the two sectors). South Africa (43), Egypt (23), and Tunisia (19) were the countries where most of the research was conducted. Even if the number of articles related to LCA have increased in recent years, many steps still remain. For example, establishing a specific life cycle inventory (LCI) database for African countries or a targeted ideal life cycle impact assessment (LCIA) method. Several African key sectors could also be assessed further.

Nutrient recovery from pineapple waste through controlled batch and continuous vermicomposting systems

The largest portion of pineapple peels and pulp generated from production points is disposed of haphazardly contributing to a number of environmental and health challenges. However, these wastes contain valuable plant nutrients that could be recovered to boost soil fertility, and increase agricultural production. This study evaluated the variation in physico-chemical parameters in batch and continuous vermicomposting systems as potential pathways for nutrient recovery from pineapple waste. The study compared the efficiency of waste reduction and nutrient recovery for batch (B), and continuous (C) vermicomposting systems during a 60-day period. The substrates were pineapple peels (PW), and cattle manure (CM) fed in a ratio of 4:1 (w/w). Control reactors were fed with 100% CM in both the feeding modes. Results indicated that waste degradation was 60%, and 54% while earthworm biomass increased by 57% and 129% for BPW, and CPW, respectively. pH significantly decreased with time in both systems. Total phosphorous increased with vermicomposting time with that of B being significantly higher than C systems. Nitrogen, potassium, and sodium significantly increased in the control experiments while the three elements significantly reduced for BPW, and CPW owing to high leachate production in the latter. The N, P, K, and C retention in vermicompost was 24.2%, 90.4%, 67.5%, 41.1%, and 32.6%, 91.2%, 79.3%, 46.1%, for BPW and CPW, respectively. Continuous systems produced higher earthworm biomass and retained more nutrients in vermicompost than batch systems, and can therefore, be recommended as better systems for pineapple waste vermicomposting.

Unraveling the environmental impacts of bioactive compounds and organic amendment from grape marc

In a society that produces large amounts of solid waste, the search for new methods of valorisation has led to the development of techniques that make it possible to obtain new products from waste. In the case of bio-waste, biological treatment such as anaerobic digestion or composting appear to be suitable options for producing bio-energy or bio-fertilizers respectively. Vermicomposting is a method of converting solid organic waste into resources through bio-oxidation and stabilization of the organic waste by earthworms. The purpose of this study is to establish the environmental impacts of a complete route for the valorisation of grape pomace in order to identify environmental hotspots. In this valorisation route, different value-added products are produced with potential application in the cosmetic, food and pharmaceutical sectors. Priority was given to the use of primary data in the elaboration of the data inventories needed to perform the life cycle assessment (LCA). The main findings from this study reported that the energy requirement of the distillation process is an important hot spot of the process. Although the valorisation route has some poor results in terms of the two environmental indicators (carbon footprint and normalised impact index), when economic revenues were included in this analysis, its environmental performance was better than that of other alternatives for bio-waste recovery.

Improving Policy Evidence Base for Agricultural Sustainability and Food Security: A Content Analysis of Life Cycle Assessment Research

Life cycle assessment is a widespread method for measuring and monitoring the environmental impacts of production processes, thereby allowing the comparison of business-as-usual with more ecological scenarios. Life cycle assessment research can support evidence-based policy making by comparing and communicating the environmental impacts of agricultural and food systems, informing about the impact of mitigating interventions and monitoring sectoral progress towards sustainable development goals. This article aims at improving the contribution of science to evidence-based policies for agricultural sustainability and food security, while facilitating further research, by delivering a content-analysis based literature review of life cycle assessment research in agricultural and food economics. Results highlight that demand-side and system-level approaches need further development, as policies need to support redesigned agricultural systems and newly conceived dietary guidelines, which combine environmental protection and health benefits, without reducing productivity. Similarly, more research effort towards consequential life cycle assessment and multidimensional assessment may benefit policy makers by considering the rebound effects associated with the large-scale implementation of impact-mitigating interventions. Promising interventions involve the promotion of waste circularization strategies, which could also improve the profitability of agriculture. For effective policy making towards agricultural sustainability and food security worldwide, countries with the greatest expected population growth and raise of urbanization rates need more attention by researchers.

Comparative Performance of Organic Fertilizers in Maize (Zea mays L.) Growth, Yield, and Economic Results

Maize is a major crop grown and consumed in Uganda and it requires a high fertilizer input. However, the existing inorganic fertilizers in the market are often not affordable especially to small scale farmers, which results in decreased maize yields in the country. On the other hand, there is an abundance of unutilized animal manure, which, when treated, can be used to increase maize yields. This study evaluated the response of maize to products of different cattle manure treatment methods as well as inorganic fertilizer. The treatments such as cattle manure stored under shade (T), cattle manure stored in the open (M), cattle manure slurry digestate (S), vermicompost (V), and an inorganic fertilizer, DAP (D) were all applied in completely randomized block plots at an equal application rate of 50 kg N ha−1 with four replications per treatment. Control plots (C) where no fertilizer was applied were also considered. The experiment was done for two planting seasons in 2018. Number of leaves, plant height, cob, and grain yields were used to evaluate the performance of different fertilizer treatments. Economic assessment of all the six treatments was also carried out to determine the economic viability of applying these fertilizers on maize. Maize growth parameters and yields were all significantly increased (p < 0.05) with an application of both organic and inorganic fertilizers when compared with the control. However, there was no significant difference (p > 0.05) in the maize yields under the different fertilizer treatments. Vermicomposting was the most economically viable manure treatment method due to low operating costs and higher returns on investment that are supplemented with the production of chicken fodder (earthworm biomass) and, thus, can be recommended to farmers for production of a fertilizer that increases maize yields with assurance of economic returns.

Assessment of a Cattle Manure Vermicomposting System Using Material Flow Analysis: A Case Study from Uganda

Growth in cattle population is associated with increased manure generation whose current management in low-income countries is associated with health and environmental problems as well as low utilization rates. This trend can be reversed by promoting better manure management technologies. This study assessed vermicomposting as one of the technologies to manage organic wastes, using the case study in Uganda. A vermicomposting system using cattle manure and earthworms (Eudrilus euginea) was monitored for one year with the harvesting of products (compost, earthworm biomass) after every three months. Vermicompost samples from the beginning of the experiment and after every harvest were analyzed for the following parameters: pH, ash content, volatile and total solids, nutrients N, P, K, and C. Emissions of CO2, CH4, NH3, and N2O were also measured. Material flow analysis was used to determine the flows and retention of nutrients within the system. Results showed that total solids, ash, N, P, and K content significantly increased, while contents of volatile solids and C, as well as the pH, significantly decreased over time. Of the materials that entered the vermicomposting system, 46% went to vermicompost, 2% into earthworms, and 52% was lost to the atmosphere. Substance flow analysis showed that 30% of C went to vermicompost, 69% was emitted to the atmosphere, and 2% ended up in earthworms while 75% of N was transferred to vermicompost, 7% went to earthworms, and 18% escaped into the atmosphere. The cumulative emissions were 102 g CO2 kg−1 waste, 7.6 g CH4 kg−1 waste, and 3.943 × 10−5 g N2O kg−1 waste on a dry basis, while NH3 was not detected throughout the measurement time. Compared to other manure management methods, vermicomposting demonstrated good potential in conserving nutrients as well as reducing greenhouse gas emissions.

Social Cost Benefit Analysis of Operating Compressed Biomethane (CBM) Transit Buses in Cities of Developing Nations: A Case Study

Cities in developing nations have to deal with two significant sustainability challenges amidst rampant urbanization. First, consumer-generated food waste is increasing monumentally since open dumping is still followed as a predominant practice, the negative environmental externalities associated with food waste disposal are growing beyond manageable proportions. Second, the dependency on conventional fuels like diesel to operate transit buses, which is one of the major causes for deteriorating urban air quality. A nexus established between food waste management and operation of transit buses can improve the sustainable performance of cities in developing nations. In this study, a Life Cycle Assessment (LCA) supported Social Cost-Benefit Analysis (SCBA) is performed by considering a hypothetical scenario of establishing a large food waste treating biomethanation plant in Mumbai, India. The food waste from the city is transported to a biomethanation plant where it is subjected to an anaerobic digestion (AD) process. The biogas produced as a byproduct is upgraded to compressed biomethane (CBM) and used as a vehicle fuel to operate transit buses within the city. The LCA results suggest that CBM buses can reduce greenhouse gas and particulate matter emissions by 60% compared to diesel or compressed natural gas (CNG) buses. Fossil depletion potential of CBM buses is 98% lower than diesel, suggesting CBM’s importance in decoupling developing nations dependency on imported crude oil. The SCBA considers: (a) costs to stakeholders, i.e., fees for open dumping of food waste and cost of fuel for operating transit buses; and (b) social costs incurred by negative environmental externalities (obtained by monetizing LCA results) resulting from both, open dumping as well as fuel combustion. SCBA results indicate that the food waste-based CBM model can save 6.86 billion Indian rupees (USD 99.4 million) annually for Mumbai. The savings are made due to a reduction in stakeholder’s costs (fuel) coupled with societal, i.e., environmental externality costs if entire transit bus fleet operates on CBM fuel instead of conventional fuel mix (33:67 diesel to CNG) currently used. Although the study is performed for Mumbai, the results will be replicable to any city of developing nations facing similar issues.