Synthesis and characterization of cobalt nanoparticles for application in the removal of textile dye

Cobalt Oxide on Boron-Doped Graphitic Carbon Nitride as Bifunctional Photocatalysts for CO2 Reduction and Hydrogen Evolution

In this work, the prepared cobalt oxide decorated boron-doped g-C3N4 (CoOx/g-C3N4) heterojunction exhibits remarkable activity in CO2 reduction (CO2RR), resulting in high yields of CH3COOH (∼383 μmol·gcatalyst-1) and CH3OH (∼371 μmol·gcatalyst-1) with 58% selectivity to C2+ under visible light. However, the same system leads to high H2 evolution (HER) by increasing the cobalt oxide content, suggesting that the selectivity and preference for the CO2RR or HER depend on oxide decoration. By comparing HER and CO2RR evolution in the same system, this work provides critical insights into the catalytic mechanism, indicating that the CoOx/g-C3N4 heterojunction formation is necessary to foster high visible light photoactivity.

Long Noncoding RNA NR_030777 Alleviates Cobalt Nanoparticles-Induced Neurodegenerative Damage by Promoting Autophagosome-Lysosome Fusion

Potential exposure to cobalt nanoparticles (CoNPs) occurs in various fields, including hard alloy industrial production, the increasing use of new energy lithium-ion batteries, and millions of patients with metal-on-metal joint prostheses. Evidence from human, animal, and in vitro experiments suggests a close relationship between CoNPs and neurotoxicity. However, a systematic assessment of central nervous system (CNS) impairment due to CoNPs exposure and the underlying molecular mechanisms is lacking. In this study, we found that CoNPs induced neurodegenerative damage both in vivo and in vitro, including cognitive impairment, β-amyloid deposition and Tau hyperphosphorylation. CoNPs promoted the formation of autophagosomes and impeding autophagosomal-lysosomal fusion in vivo and in vitro, leading to toxic protein accumulation. Moreover, CoNPs exposure reduced the level of transcription factor EB (TFEB) and the abundance of lysosome, causing a blockage in autophagosomal-lysosomal fusion. Interestingly, overexpression of long noncoding RNA NR_030777 mitigated CoNPs-induced neurodegenerative damage in both in vivo and in vitro models. Fluorescence in situ hybridization assay revealed that NR_030777 directly binds and stabilizes TFEB mRNA, alleviating the blockage of autophagosomal-lysosomal fusion and ultimately restoring neurodegeneration induced by CoNPs in vivo and in vitro. In summary, our study demonstrates that autophagic dysfunction is the main toxic mechanism of neurodegeneration upon CoNPs exposure and NR_030777 plays a crucial role in CoNPs-induced autophagic dysfunction. Additionally, the proposed adverse outcome pathway contributes to a better understanding of CNS toxicity assessment of CoNPs.

Intercellular Mitochondrial Transfer: The Novel Therapeutic Mechanism for Diseases

Mitochondria, the dynamic organelles responsible for energy production and cellular metabolism, have the metabolic function of extracting energy from nutrients and synthesizing crucial metabolites. Nevertheless, recent research unveils that intercellular mitochondrial transfer by tunneling nanotubes, tumor microtubes, gap junction intercellular communication, extracellular vesicles, endocytosis and cell fusion may regulate mitochondrial function within recipient cells, potentially contributing to disease treatment, such as nonalcoholic steatohepatitis, glioblastoma, ischemic stroke, bladder cancer and neurodegenerative diseases. This review introduces the principal approaches to intercellular mitochondrial transfer and examines its role in various diseases. Furthermore, we provide a comprehensive overview of the inhibitors and activators of intercellular mitochondrial transfer, offering a unique perspective to illustrate the relationship between intercellular mitochondrial transfer and diseases.

Spectroscopic and antibacterial activities of cobalt and nickel nanoparticles: a comparative analysis

This study aimed to compare the spectroscopy, morphological, electrocatalytic properties, and antibacterial activities of cobalt nanoparticles (CoNPs) with nickel nanoparticles (NiNPs). Cobalt nanoparticles and NiNPs were prepared via a chemical reduction approach and characterized utilizing transmission electron microscopy (TEM), energy-dispersive X-ray (EDX), and X-ray diffraction (XRD) techniques. The result from XRD and TEM analysis revealed that the synthesized nanoparticles exhibit face-centered cubic with smooth spherical shape, having average particles size of 12 nm (NiNPs) and 18 nm (CoNPs). The electrochemical properties of the nanoparticles were examined via cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) techniques. The CV results showed that GCE-Ni (35.6 μA) has a higher current response compared to GCE-Co (10.5 μA). The EIS analysis revealed that GCE-Ni (1.39 KΩ) has faster electron transport capability compared to GCE-Co (2.99 KΩ) as indicated in their Rct values. The power density of the synthesized nanoparticles was obtained from their "knee" frequency (f°) values, with GCE-Ni (3.16 Hz) having higher f° values compared to GCE-Co (2.00 Hz). The antibacterial activity of the nanoparticles was evaluated against multidrug-resistant Escherichia coli O157, Escherichia coli O177, Salmonella enterica, Staphylococcus aureus, and Vibrio cholerae. The result from the antibacterial study revealed that at low concentrations both CoNPs and NiNPs have significant antibacterial activities against E. coli O157, E. coli O177, S. enterica, S. aureus, and V. cholerae. NiNPs showed better antibacterial activities at low concentrations of 61.5, 61.5, 125, 61.5, and 125 µg/mL compared to CoNPs with minimum inhibitory concentrations of 125, 125, 250, 61.5, and 125 µg/mL against E. coli O157, E. coli O177, S. enterica, S. aureus, and V. cholerae, respectively. These promising antibacterial activities emphasize the potential of CoNPs and NiNPs as effective antibacterial agents, which could aid in the development of novel antibacterial medicines.

Efficient removal of environmental pollutants by green synthesized metal nanoparticles of Clitoriaternatea

Prevention and management of water pollution are becoming a great challenge in the present scenario. Different conventional methods like carbon adsorption, ion exchange, chemical precipitation, evaporation, and biological treatments remove water pollutants. Nowadays, the requirement for effective, non-toxic and safe waste management strategies is very high. Nanomaterials have been explored in various fields due to their unique characteristics. Green synthesis of nanomaterial is becoming more popular due to their safety, non-toxicity, and ease of scale-up technology. Metal nanoparticles can be synthesized using a green synthesis method using biological sources provided by eco-friendly, non-hazardous nanomaterials with superior properties to bulk metals. Hence, this study has designed a green synthesis of magnetic (cobalt oxide) and noble (gold) nanoparticles from the fresh flowers of Clitoria ternatea. The flavonoids and polyphenols in the extract decreased the energy band gap of cobalt oxide and gold nanoparticles; hence, the capping of the natural constituents in Clitoria ternatea helped form stable metal nanoparticles. The cobalt oxide and gold nanoparticles are evaluated for their potential for eliminating organic pollutants from industrial effluent. The novelty of this present work represents the application of cobalt oxide nanoparticles in the removal of organic pollutants and a comparative study of the catalytic behaviour of both metal nanoparticles. The degradation of bromophenol blue, bromocresol green, and 4-nitrophenol in the presence of gold nanoparticles was completed in 120, 45, and 20 min with rate constants of 3.7 × 10-3/min, 6.9 × 10-3/min, and 16.5 × 10-3/min, respectively. Similarly, the photocatalysis of bromophenol blue, bromocresol green, and 4-nitrophenol in the presence of cobalt oxide nanoparticles was achieved in 60, 90, and 40 min with rate constants of 2.3 × 10-3/min, 1.8 × 10-3/min, and 1.7 × 10-3/min, respectively. The coefficient of correlation (R2) values justify that the degradation of organic pollutants follows first-order kinetics. The significance of the study is to develop green nanomaterials that can be used efficiently to remove organic pollutants in wastewater using a cost-effective method with minimal toxicity to aquatic animals. It has proved to be useful in environmental pollution management.

Environment-Induced Degradation of Shape Memory Alloys: Role of Alloying and Nature of Environment

Shape memory effects coupled with superelasticity are the distinctive characteristics of shape memory alloys (SMAs), a type of metal. When these alloys are subject to thermomechanical processing, they have the inherent ability to react to stimuli, such as heat. As a result, these alloys have established their usefulness in a variety of fields and have in recent years been chosen for use in stents, sensors, actuators, and several other forms of life-saving medical equipment. When it comes to the shape memory materials, nickel-titanium (Ni-Ti) alloys are in the forefront and have been chosen for use in a spectrum of demanding applications. As shape memory alloys (SMAs) are chosen for use in critical environments, such as blood streams (arteries and veins), orthodontic applications, orthopedic implants, and high temperature surroundings, such as actuators in aircraft engines, the phenomenon of environment-induced degradation is of both interest and concern. Hence, the environment-induced degradation behavior of the shape memory alloys (SMAs) needs to be studied to find viable ways to improve their resistance to an aggressive environment. The degradation that occurs upon exposure to an aggressive environment is often referred to as corrosion. Environment-induced degradation, or corrosion, being an unavoidable factor, certain techniques can be used for the purpose of enhancing the degradation resistance of shape memory alloys (SMAs). In this paper, we present and discuss the specific role of microstructure and contribution of environment to the degradation behavior of shape memory alloys (SMAs) while concurrently providing methods to resist both the development and growth of the degradation caused by the environment.

Facile synthesis of biopolymer decorated magnetic coreshells for enhanced removal of xenobiotic azo dyes through experimental modelling

Since contamination of xenobiotics in water bodies has become a global issue, their removal is gaining ample attention lately. In the present study, nZVI was synthesized using chitosan for removal of two such xenobitic dyes, Bromocresol green and (BCG) and Brilliant blue (BB), which have high prevalence in freshwater and wastewater matrices. nZVI functionalization prevents nanoparticle aggregation and oxidation, enhancing the removal of BCG and BB with an efficiency of 84.96% and 86.21%, respectively. XRD, FESEM, EDS, and FTIR have been employed to investigate the morphology, elemental composition, and functional groups of chitosan-modified nanoscale-zerovalent iron (CS@nZVI). RSM-CCD model was utilized to assess the combined effect of five independent variables and determine the best condition for maximum dye removal. The interactions between adsorbent dose (2-4 mg), pH (4-8), time (20-40 min), temperature (35-65 0C), and initial dye concentration (40-60 mg/L) was modeled to study the response, i.e., dye removal percentage. The reaction fitted well with Langmuir isotherm and pseudo-first-order kinetics, with a maximum qe value of 426.97 and 452.4 mg/g for BCG and BB, respectively. Thermodynamic analysis revealed the adsorption was spontaneous, and endothermic in nature. Moreover, CS@nZVI could be used up to five cycles of dye removal with remarkable potential for real water samples.

Fast and effective removal of textile dyes from the wastewater using reusable porous nano-carbons: a study on adsorptive parameters and isotherms

In the present study, recyclable porous nano-carbons (PNCs) were used to remove textile dyes (mainly methylene blue, methyl orange, and rhodamine B) from an aqueous environment. Due to their high surface area and mesoporous nature, PNCs exhibited extremely fast and efficient adsorption behavior. PNCs synthesized at an elevated temperature of 1000 °C are used in batch experiments, as they showed maximum dye removal with high surface area. Batch mode was used to optimize operational parameters such as initial dye concentration, contact time, adsorbent dose and pH as a function of time. Within ~7 minutes of treatment, PNCs achieved a maximum removal efficacy of ~99 percent for methylene blue. The recyclability of PNCs was investigated, and it retained its efficiency even after seven cycles. The efficacy of PNCs in treating industrial water contaminated with methylene blue dye was assessed. Different adsorption isotherms were carried out to determine maximum amount of dye that can be adsorbed on to surface of PNCs. The maximum adsorption capacity attained using Langmuir isotherm for methylene blue was around 1216.54 mg g^-1. Adsorption kinetics were applied on experimental data to identify the rate of adsorption. It was confirmed that novel onion peel-based porous PNCs were successful in removing methylene blue dye effectively with short duration in comparison with other dyes mainly rhodamine B and methyl orange.

Bos taurus (A-2) urine assisted bioactive cobalt oxide anchored ZnO: a novel nanoscale approach

In this study, a novel synthetic method for cobalt oxide (Co3O4) nanoparticles using Bos taurus (A-2) urine as a reducing agent was developed. In addition to this ZnO nanorods were produced hydrothermally and a nanocomposite is formed through a solid-state reaction. The synthesized materials were characterized through modern characterization techniques such as XRD, FE-SEM with EDS, DLS, zeta potential, FT-IR, Raman spectroscopic analysis, and TGA with DSC. The free radical destructive activity was determined using two different methods viz. ABTS and DPPH. The potential for BSA denaturation in vitro, which is measured in comparison to heat-induced denaturation of egg albumin and results in anti-inflammatory effects of nanomaterial was studied. All synthesized nanomaterials have excellent antibacterial properties, particularly against Salmonella typhi and Staphylococcus aureus. The composite exhibits excellent antioxidant and anti-inflammatory activities in comparison to pure nanomaterials. This reveals that these nanomaterials are advantageous in medicine and drug administration.

Biochar-Mediated Zirconium Ferrite Nanocomposites for Tartrazine Dye Removal from Textile Wastewater

To meet the current challenges concerning the removal of dyes from wastewater, an environmentally friendly and efficient treatment technology is urgently needed. The recalcitrant, noxious, carcinogenic and mutagenic compound dyes are a threat to ecology and its removal from textile wastewater is challenge in the current world. Herein, biochar-mediated zirconium ferrite nanocomposites (BC-ZrFe₂O₅ NCs) were fabricated with wheat straw-derived biochar and applied for the adsorptive elimination of Tartrazine dye from textile wastewater. The optical and structural properties of synthesized BC-ZrFe₂O₅ NCs were characterized via UV/Vis spectroscopy, Fourier transform Infra-red (FTIR), X-Ray diffraction (XRD), Energy dispersive R-Ray (EDX) and Scanning electron microscopy (SEM). The batch modes experiments were executed to explore sorption capacity of BC-ZrFe₂O₅ NCs at varying operative conditions, i.e., pH, temperature, contact time, initial dye concentrations and adsorbent dose. BC-ZrFe₂O₅ NCs exhibited the highest sorption efficiency among all adsorbents (wheat straw biomass (WSBM), wheat straw biochar (WSBC) and BC-ZrFe₂O₅ NCs), having an adsorption capacity of (mg g^-1) 53.64 ± 0.23, 79.49 ± 0.21 and 89.22 ± 0.31, respectively, for Tartrazine dye at optimum conditions of environmental variables: pH 2, dose rate 0.05 g, temperature 303 K, time of contact 360 min and concentration 100 mg L^-1. For the optimization of process variables, response surface methodology (RSM) was employed. In order to study the kinetics and the mechanism of the adsorption process, kinetic and equilibrium mathematical models were used, and results revealed 2nd order kinetics and a multilayer chemisorption mechanism due to complexation of hydroxyl, Fe and Zr with dyes functional groups. The nanocomposites were also recovered in five cycles without significant loss (89 to 63%) in adsorption efficacy. This research work provides insight into the fabrication of nanoadsorbents for the efficient adsorption of Tartrazine dye, which can also be employed for practical engineering applications on an industrial scale as efficient and cost effective materials.

Graphene oxide functionalized with cobalt ferrites applied to the removal of bisphenol A: ionic study, reuse capacity and desorption kinetics

A new adsorbent material based on graphene oxide (GO) functionalized with magnetic cobalt ferrite nanoparticles (γCoFe₂O₄) was synthesized via ultrasonication to remove the endocrine-disrupting-chemical bisphenol A (BPA) from aqueous solutions. The synthesized material (GO-γCoFe₂O₄) was characterized by TEM, SEM, DRX and FTIR analysis. Magnetization measures proved that the adsorbent had superparamagnetic characteristics that facilitated its separation from the aqueous solution. The maximum adsorption capacity obtained was 30 mg g^-1 with adsorbent concentration of 1 g L^-1, temperature of 55°C and natural pH of the solution. The experimental data were better adjusted to the kinetic models of pseudo-second-order and Langmuir isotherm. The thermodynamic parameters showed that the BPA adsorption on GO-γCoFe₂O₄ was spontaneous, exothermic and thermodynamically favourable. Desorption kinetics was performed using 50% ethanol as solvent, resulting in an equilibrium time of 4 h with better adjustment to the pseudo-second order kinetic model. The adsorbent showed a high regeneration capacity maintaining adsorptive capacity above 75% after 6 cycles of reuse.

Current Methods for Synthesis and Potential Applications of Cobalt Nanoparticles: A Review

Cobalt nanoparticles (CoNPs) are promising nanomaterials with exceptional catalytic magnetic, electronic, and chemical properties. The nano size and developed surface open a wide range of applications of cobalt nanoparticles in biomedicine along with those properties. The present review assessed the current environmentally friendly synthesis methods used to synthesize CoNPs with various properties, such as size, zeta potential, surface area, and magnetic properties. We systematized several methods and provided some examples to illustrate the synthetic process of CoNPs, along with the properties, the chemical formula of obtained CoNPs, and their method of analysis. In addition, we also looked at the potential application of CoNPs from water purification cytostatic agents against cancer to theranostic and diagnostic agents. Moreover, CoNPs also can be used as contrast agents in magnetic resonance imaging and photoacoustic methods. This review features a comprehensive understanding of the synthesis methods and applications of CoNPs, which will help guide future studies on CoNPs.

Intercellular transfer of mitochondria via tunneling nanotubes protects against cobalt nanoparticle-induced neurotoxicity and mitochondrial damage

Broad applications of cobalt nanoparticles (CoNPs) have raised increased concerns regarding their potential toxicity. However, the underlining mechanisms of their toxicity have yet to be characterized. Here, we demonstrated that CoNPs reduced cell viability and induced membrane leakage. CoNPs induced oxidative stress, as indicated by the generation of reactive oxygen species (ROS) secondary to the increased expression of hypoxia-induced factor 1 alpha. Moreover, CoNPs led to mitochondrial damage, including generation of mitochondrial ROS, reduction in ATP content, morphological damage and autophagy. Interestingly, exogenous mitochondria were observed between neurons and astrocytes upon CoNPs exposure. Concomitantly, tunneling nanotubes (TNTs)-like structures were observed between neurons and astrocytes upon CoNPs exposure. These structures were further verified to be TNTs as they were found to be F-actin rich and lacking tubulin. We then demonstrated that TNTs were utilized for mitochondrial transfer between neurons and astrocytes, suggesting a novel crosstalk phenomenon between these cells. Moreover, we found that the inhibition of TNTs (using actin-depolymerizing drug latrunculin B) intensified apoptosis triggered by CoNPs. Therefore, we demonstrate, for the first time, that the inhibition of intercellular mitochondrial transfer via TNTs aggravates CoNPs-induced cellular and mitochondrial toxicity in neuronal cells, implying a novel intercellular protection mechanism in response to nanoparticle exposure.

Cr(VI) reduction and adsorption by bimetallic nanoparticles from Li-ion batteries

In this work, bimetallic nanoparticles of cobalt and copper (NPLIB) were synthetized from obsolete Li-ion batteries cellphones and applied for the first time in the Cr(VI) removal. NPLIB has approximately 50 and 40% of Co and Cu content, respectively. The material is composed of Cu⁰ and Co⁰ but also presents metal oxides on its surface. The nanoparticles have spherical morphology and a high agglomeration capacity. The cobalt was better distributed on the surface, while copper was present in small scattered clusters. The NPLIB have an average diameter of 13.5 nm being confirmed the formation of the core-shell structure. The point of zero charge was calculated as 8.3. The NPLIB were used in the Cr(VI) removal process in aqueous solution, exhibiting a removal efficiency of ≈ 90% in 60 min of reaction. The kinetics study showed a mechanism consisting of two phases and better fit by pseudo-second-order model. The first phase is faster than the second. It is possible to observe peaks related to the oxidation of Co and Cu in the post reaction NPLIB by X-ray diffraction analysis, suggesting the modification of the material. Raman spectroscopy has shown that Cr(VI) is reduced to Cr(III) and remains bound to the surface of the nanoparticle, even after the desorption process, reducing its removal efficiency in new cycles. Graphical abstract.