Enhanced removal of the endocrine disruptor compound Bisphenol A by adsorption onto green-carbon materials. Effect of real effluents on the adsorption process

Porous activated carbons derived from waste Moroccan pine cones for high-performance adsorption of bisphenol A from water

Porous-activated carbons (ACs) derived from Moroccan pine cones (PC) were synthesised by a two step-chemical activation/carbonisation method using phosphoric acid (PC-H) and zinc chloride (PC-Z) as activating agents and used for the adsorption of bisphenol A (BPA) from water. Several techniques (TGA/DTA, FT-IR, XRD, SEM and BET) were used to determine the surface area and pore characterisation and variations during the preparation of the adsorbents. The modification significantly increased the surface area of both ACs, resulting in values of 1369.03 m2 g-1 and 1018.86 m2 g-1 for PC-H and PC-Z, respectively. Subsequent adsorption tests were carried out, varying parameters including adsorbent dosage, pH, initial BPA concentration, and contact time. Therefore, the highest adsorption capacity was observed when the BPA molecules were in their neutral form. High pH values were found to be unfavourable for the removal of bisphenol A from water. The results showed that BPA adsorption kinetics and isotherms followed pseudo-second-order and Langmuir models. Thermodynamic studies indicated that the adsorption was spontaneous and endothermic. Besides, the regeneration of spent adsorbents demonstrated their reusability. The adsorption mechanisms can be attributed to physical adsorption, hydrogen bonds, electrostatic forces, hydrophobic interactions, and π-π intermolecular forces.

Novel manganese and nitrogen co-doped biochar based on sodium bicarbonate activation for efficient removal of bisphenol A: Mechanism insight and role analysis of manganese and nitrogen by combination of characterizations, experiments and density functional theory calculations

A novel porous manganese and nitrogen co-doped biochar (Mn-N@SBC) was synthesized via one-step pyrolysis, utilizing loofah agricultural waste as the precursor and NaHCO3 as the activator. The behavior of bisphenol A adsorbed on Mn-N@SBC was evaluated using static batch adsorption experiments. Compared to direct manganese-nitrogen co-doping, co-doping based on NaHCO3 activation significantly increased the specific surface area (231 to 1027 m2·g-1) and adsorption capacity (15 to 351 mg·g-1). Wide pH (2-10) and good resistance to cation/anion, humic acid and actual water demonstrated the robust adaptability of Mn-N@SBC to environmental factors. The significantly reduced specific surface area after adsorption, adverse effects of ethanol and phenanthrene on the removal of bisphenol A, and theoretically predicted interaction sites indicated the primary adsorption mechanisms involved pore filling, hydrophobicity, and π-π-electron-donor-acceptor interaction. This work presented an approach to create high-efficiency adsorbents from agricultural waste, offering theoretical and practical guidance for the removal of pollutants.

Bisphenol A adsorption using modified aloe vera leaf-wastes derived bio-sorbents from aqueous solution: kinetic, isotherm, and thermodynamic studies

Reactive-oxygen-species are produced more often in the body when bisphenol A (BPA), an endocrine-disrupting-substance, is present. In this investigation, bio-sorbents from an aqueous solution adapted from Aloe-vera were used to survey BPA removal. Aloe-vera leaf wastes were used to create activated carbon, which was then analyzed using Fourier transform infrared (FTIR), Field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), Thermogravimetric analysis (TGA), Zeta potential, and Brunauer-Emmett-Teller (BET) techniques. It was revealed that the adsorption process adheres to the Freundlich isotherm model with R2>0.96 and the pseudo-second-order kinetic model with R2>0.99 under ideal conditions (pH = 3, contact time = 45 min, concentration of BPA = 20 mg.L-1, and concentration of the adsorbent = 2 g.L-1). After five-cycle, the efficacy of removal was greater than 70%. The removal of phenolic-chemicals from industrial-effluent can be accomplished with the assistance of this adsorbent in a cost-effective and effective-approach.

Evaluation of Phenobarbital Adsorption Efficiency on Biosorbents or Activated Carbon Obtained from Adansonia Digitata Shells

The removal of pharmaceutically active compounds present in relatively low concentration in wastewater is critical. This is because they have a severe, negative impact on life and the environment. To address this issue, adsorption was used, which is an effective wastewater treatment method for removing substances found in low concentrations in water. This study compared the adsorption performance of active carbon to three biosorbents derived from Adansonia digitata shells. The adsorbents were prepared and characterized using TGA, SEM, EDX, and FTIR analyses and pHPZC. To better understand the adsorption process, equilibrium and reaction kinetics studies were conducted. The effect of contact time, initial phenobarbital concentration, adsorbent mass, and pH was investigated in static conditions. The adsorption results revealed that the biosorbent B3 has a higher affinity for the eliminated compound, with an equilibrium time of 60 min and an adsorption capacity of 47.08 mg/g at an initial concentration of 50 mg/L. The experimental data are consistent with Langmuir and Sips adsorption isotherm models, and with the pseudo-second order and Elovich models for kinetics description. This indicates strong interactions between the adsorbent materials and the pharmaceutical micropollutant. Based on these findings, it appears that, among the tested materials, B3 biosorbent is the most efficient for removing phenobarbital present in low concentrations in water.

Statistical physics modeling study of an environmentally friendly and efficient adsorbent derived from the brown macroalgae Bifurcaria bifurcata for the removal of Bisphenol A

The brown macroalgae Bifurcaria bifurcata was valued and used to develop a carbonaceous material activated by H2SO4 (AC-BB@H2SO4), with the goal of assessing its adsorption ability against Bisphenol A (BPA). During the adsorption experiments, the effects of the adsorbent dose, solution pH, and contact time were examined, and the results were m = 0.4 g/L, pH = 8.3, and t = 120 min, with an elimination yield of 91.6 %. With comparatively high R2 values, the pseudo-second-order kinetic model perfectly fitted the experimental data. Langmuir's model was found to be the best appropriate for describing the adsorption equilibrium of BPA on AC-BB@H2SO4. The thermodynamic findings show that BPA adsorption on AC-BB@H2SO4 was spontaneous, favorable, and endothermic in nature. Even after six cycles of reuse, regeneration testing demonstrated that our adsorbent could eliminate BPA by >50 %. The BPA adsorption mechanism's statistical physics control parameters were determined and analyzed. BPA's adsorption energies were <40 kJ/mol, indicating that the interactions between BPA and AC-BB@H2SO4 were governed by physical forces (i.e., hydrogen bonding and van der Waals and electrostatic interactions). All of these intriguing findings indicate that our carbonaceous material might have direct ramifications in the field of wastewater treatment, notably for the clearance of BPA, which is difficult to biodegrade.

New and effective cassava bagasse-modified biochar to adsorb Food Red 17 and Acid Blue 9 dyes in a binary mixture

A promissory technic for reducing environmental contaminants is the production of biochar from waste reuse and its application for water treatment. This study developed biochar (CWb) and NH4Cl-modified biochar (MCWb) using cassava residues as precursors. CWb and MCWb were characterized and evaluated in removing dyes (Acid Blue 9 and Food Red 17) in a binary system. The adsorbent demonstrated high adsorption capacity at all pH levels studied, showing its versatility regarding this process parameter. The equilibrium of all adsorption experiments was reached in 30 min. The adsorption process conformed to pseudo-first-order kinetics and extended Langmuir isotherm model. The thermodynamic adsorption experiments demonstrated that the adsorption process is physisorption, exhibiting exothermic and spontaneous characteristics. MCWb exhibited highly efficient and selective adsorption behavior towards the anionic dyes, indicating maximum adsorption capacity of 131 and 150 mg g-1 for Food Red 17 and Acid Blue 9, respectively. Besides, MCWb could be reused nine times, maintaining its original adsorption capacity. This study demonstrated an excellent adsorption capability of biochars in removing dyes. In addition, it indicated the recycling of wastes as a precursor of bio composts, a strategy for utilization in water treatment with binary systems. It showed the feasibility of the reuse capacity that indicated that the adsorbent may have many potential applications.

Combining computational tools and experimental studies towards endocrine disruptors mitigation: A review of biocatalytic and adsorptive processes

The endocrine disruptors (EDCs) are an important group of emerging contaminants, and their mitigation has been a huge challenge due to their chemistry complexity and variety of these compounds. The traditional treatments are inefficient to completely remove EDCs, and adsorptive processes are the major alternative investigated on their removal. Also, the use of EDCs degrading enzymes has been encouraged due to ecofriendly approach of biocatalytic processes. This paper highlights the occurrence, classification, and toxicity of EDCs with special focus in the use of enzyme-based and adsorptive technologies in the elimination of EDCs from ambiental matrices. Numerous prior reviews have focused on the discussions toward these technologies. However, the literature lacks theoretical discussions about important aspects of these methods such as the mechanisms of EDCs adsorption on the adsorbent surface or the interactions between degrading enzymes - EDCs. In this sense, theoretical calculations combined to experimental studies may help in the development of more efficient technologies to EDCs mitigation. In this review, we point out how computational tools such as molecular docking and molecular dynamics have to contribute to the design of new adsorbents and efficient catalytic processes towards endocrine disruptors mitigation.

Phyto-assisted synthesis of CuO/industrial waste derived biochar composite for adsorptive removal of doxycycline hydrochloride and recycling of spent biochar as green energy storage device

The highest exposure of Endocrine disrupting compounds (EDC) into the water bodies as a result of extensive production and application of Covid-19 related drugs is a growing concern now a days. Herein, a novel nanocomposite material was developed by impregnating green synthesized copper oxide nanoparticles on the porous surface of fabric waste derived biochar to eliminate the concerned EDCs along with a sustainable disposal strategy for the spent adsorbent. Morphological characterizations by Field emission scanning electron microscopy confirmed the formation of hierarchical porous structured material. X-ray analysis revealed presence of both amorphous nature of biochar matrix as well as the crystalline nature attributed from monodispersion of copper oxide nanoparticles onto biochar surface. Batch sorption study showed removal of doxycycline hydrochloride (DOX) of >97% after 2 h at pH 7, 30 mg L-1 initial concentration of DOX and 2 g L-1 of adsorbent dose at room temperature after a two-step optimization process. Spectroscopic study and Raman shift suggested that pore filling, strong complexation and electrostatic interactions maximise the adsorption of DOX in the CuO/biochar composite as compared to the pristine biochar. However disposal of spent adsorbent is a crucial aspect for the environment and therefore, a sustainable recycling strategy for DOX loaded adsorbent as electrode material has been proposed for the first time in this study. Maximum specific capacitance value was observed in the range of 221.9-297.3 F g-1 for the DOX loaded nanocomposite at 1 mV s-1 comparable with other reported heteroatom-doped carbonaceous material as electrode. Therefore the excellent adsorption capacity of green synthesized CuO/biochar composite and its recycling after DOX adsorption can be recommended as a sustainable solution for mitigation of pharmaceuticals from wastewater. A detail study on degradation of DOX into eco-friendly products and its cost-effectiveness would be beneficial to suggest appropriate mitigation strategy for such compounds.

Emerging applications of biochar: A review on techno-environmental-economic aspects

Biomass fast pyrolysis produces bio-oil and biochar achieving circular economy. This review explored the emerging applications of biochar. Biochar possesses the unique properties for removing emerging contaminants and for mine remediation, owing to its negative charge surface, high specific surface area, large pore size distribution and surface functional groups. Additionally, biochar could adsorb impurities such as CO2, moisture, and H2S to upgrade the biogas. Customizing pyrolysis treatments, optimizing the feedstock and pyrolysis operating conditions enhance biochar production and improve its surface properties for the emerging applications. Life cycle assessment and techno-economic assessment indicated the benefits of replacing conventional activated carbon with biochar.

Effective immobilization of bisphenol A utilizing activated biochar incorporated into soil: combined with batch adsorption and fixed-bed column studies

This study presented the mixture of biochar and soil for removal of bisphenol A (BPA) to assess environmental remediation ability. Using phoenix tree leaves as biomass and phosphoric acid as activator, after one-step hydrothermal and short-term activation, the eventual solid product was phosphoric acid hydrothermal activated carbon (HPC). The characterizations showed that HPC had the high specific surface (994.21 m2·g-1), and large unsaturated esters and hydroxyl groups. The saturated adsorption capacities of batch and column adsorption for the addition of 0.5% HPC to soil were 0.790 mg·g-1 and 67.23 mg·kg-1, while to the natural soil were 0.236 mg·g-1 and 8.75 mg·kg-1, respectively. The adsorption kinetics and thermodynamic analysis indicated that the adsorption process utilizing HPC incorporated into soil was a chemical reaction rate-controlled, physical-dominated multilayer adsorption, and spontaneous endothermic. Also, batch adsorption experiments and analysis were performed under different pH levels, HPC contents, organic acid concentrations, and cationic strengths. Successively, fixed-bed column experiments were carried out with and without the HPC; the results showed that the wide mass transfer zone led to the effective fixation of BPA, and the organic acid had no obvious effect on the fixation of BPA when the 1.0% HPC mixed with soil. Finally, through characterizations and data analysis, the enhanced adsorption of BPA by HPC mixed with soil mainly relied on π-π interaction, hydrogen bonding, followed by electrostatic attraction and pore filling.

One-step preparation of magnetic N-doped sodium alginate-based porous carbon and efficient adsorption of bisphenol A

To resourcefully utilize algal biomass and effectively remove bisphenol A (BPA) from water, sodium alginate (SA) was prepared as the nitrogen-doped magnetic porous carbon material (SAC/N/Fe) with well-developed pore structure according to a one-step method using K2CO3, melamine, Fe(NO3)3·9H2O as the activator, nitrogen dopant, and magnetic precursor, respectively, in this study. The best product, SAC/N/Fe-0.2, was obtained by adjusting the mass ratio of raw materials, and its specific surface area and pore volume were 2240.65 m2 g-1 and 1.44 cm3 g-1, respectively, with a maximum adsorption capacity of 1248.23 mg g-1 for BPA at 308 K. SEM, XRD, XPS, VSM, and FT-IR characterization confirmed that the iron was successfully doped, giving the porous carbon a magnetic separation function. The adsorption process of BPA was more consistent with the Langmuir model and the proposed secondary kinetics, and the adsorption effect was stable and efficient in a wide pH range and under the interference of different metal ions. At the same time, the porous carbon was easy to separate and recover with good regeneration performance.

Adsorption and catalytic degradation of bisphenol A and p-chlorophenol by magnetic carbon nanotubes

Phenolic compounds are common industrial pollutants that seriously endangers water ecology and human health. Therefore, the development of efficient and recyclable adsorbents is of importance for wastewater treatment. In this research, HCNTs/Fe3O4 composites were constructed using co-precipitation way by loading magnetic Fe3O4 particles onto hydroxylated multi-walled carbon nanotubes (MWCNTs), showing excellent adsorption capacity for Bisphenol A (BPA) and p-chlorophenol (p-CP), and excellent catalytic ability of activating potassium persulphate (KPS) for degradation of BPA and p-CP. The adsorption capacity and catalytic degradation potential were evaluated for the removal of BPA and p-CP from solutions. The results showed that the adsorption took only 1 h to reach equilibrium and HCNTs/Fe3O4 had maximum adsorption capacities of 113 mg g-1 for BPA and 41.6 mg g-1 for p-CP at 303 K, respectively. The adsorption of BPA fitted well using the Langmuir, Temkin and Freundlich models while the adsorption of p-CP fitted well using the Freundlich and Temkin models. BPA adsorption on HCNTs/Fe3O4 was dominated by π-π stacking and hydrogen bonding forces. The adsorption included both the mono-molecular layer adsorption on the adsorbent surface and the multi-molecular layer adsorption on the non-uniform surface. The adsorption of p-CP on HCNTs/Fe3O4 was a multi-molecular layer adsorption on a dissimilar surface. The adsorption was controlled by forces such as π-π stacking, hydrogen bonding, partition effect and molecular sieve effect. Moreover, KPS was added to the adsorption system to initiate a heterogeneous Fenton-like catalytic degradation. Over a wide pH range (4-10), 90% of the aqueous BPA solution and 88% of the p-CP solution were degraded in 3 and 2 h, respectively. After three adsorption-regeneration or degradation cycles, the removal of BPA and p-CP remained up to 88% and 66%, indicating that HCNTs/Fe3O4 composite is cost-effective, stable and highly efficient to remove BPA and p-CP from solution.

Physico-chemical and biological remediation techniques for the elimination of endocrine-disrupting hazardous chemicals

Due to their widespread occurrence and detrimental effects on human health and the environment, endocrine-disrupting hazardous chemicals (EDHCs) have become a significant concern. Therefore, numerous physicochemical and biological remediation techniques have been developed to eliminate EDHCs from various environmental matrices. This review paper aims to provide a comprehensive overview of the state-of-the-art remediation techniques for eliminating EDHCs. The physicochemical methods include adsorption, membrane filtration, photocatalysis, and advanced oxidation processes. The biological methods include biodegradation, phytoremediation, and microbial fuel cells. Each technique's effectiveness, advantages, limitations, and factors affecting their performance are discussed. The review also highlights recent developments and future perspectives in EDHCs remediation. This review provides valuable insights into selecting and optimizing remediation techniques for EDHCs in different environmental matrices.

Transcriptomic analysis reveals up-regulated histone genes may play a key role in zebrafish embryo-larvae response to Bisphenol A (BPA) exposure

Bisphenol A (BPA) can induce complex regulatory mechanisms in many aquatic organisms, and it is difficult to find a suitable analytical method to efficiently enrich key genes responding to BPA exposure. In this study, zebrafish embryo transcriptomic data were obtained from two types of different BPA exposure methods. After BPA exposure, three differential gene enrichment methods were used jointly to identify up-regulated genes or pathways in zebrafish embryo larvae. The results showed that the systemic lupus erythematosus signaling pathway was significantly enriched in all BPA exposure groups. It was also noteworthy that most of the up-regulated genes in systemic lupus erythematosus signaling were histones. In conclusion, this study suggested that autoimmunity signaling was the most common important pathway in zebrafish embryo-larvae response to different BPA exposures, and histones may play a key role in response to low-concentration BPA.

Copyrolysis of microalga Chlorella sp. and alkali lignin with potassium carbonate impregnation for synergistic Bisphenol A plasticizer adsorption

Composite functional materials offer promising opportunities for the development of tailored adsorbents with enhanced bioremediation potential towards toxic, carcinogenic endocrine disrupters such as Bisphenol A (BPA). Copyrolysis of microalga Chlorella sp. (CH) alkali lignin (L) with K₂CO₃ impregnation yielded a carbon-based composite (CHL-AC) with a micro-mesoporous structure of 0.643 cm³/g, surface area of 1414 m²/g, and BPA adsorption capacity of Q_max 316.858 mg/g. Enhanced BPA removal efficiency indicated a positive synergistic effect upon a combination of L and CH, resulting in a 73.24 % removal efficiency compared with the individual carbon components of 52.33 % for L-AC and 67.35 % for CH-AC. The kinetics and equilibrium results were described well by the pseudo second-order kinetic model and Freundlich isotherm, respectively. This paper elucidates the blending of microalgae and lignin into high-value carbon composite material, CHL-AC, with immense potential for the treatment of BPA-contaminated waters to contribute to Goal 6 (clean water and sanitation).

Bioremediation of Endocrine Disrupting Chemicals- Advancements and Challenges

Endocrine Disrupting Chemicals (EDCs), major group of recalcitrant compounds, poses a serious threat to the health and future of millions of human beings, and other flora and fauna for years to come. A close analysis of various xenobiotics undermines the fact that EDC is structurally diverse chemical compounds generated as a part of anthropogenic advancements as well as part of their degradation. Regardless of such structural diversity, EDC is common in their ultimate drastic effect of impeding the proper functioning of the endocrinal system, basic physiologic systems, resulting in deregulated growth, malformations, and cancerous outcomes in animals as well as humans. The current review outlines an overview of various EDCs, their toxic effects on the ecosystem and its inhabitants. Conventional remediation methods such as physico-chemical methods and enzymatic approaches have been put into action as some form of mitigation measures. However, the last decade has seen the hunt for newer technologies and methodologies at an accelerated pace. Genetically engineered microbial degradation, gene editing strategies, metabolic and protein engineering, and in-silico predictive approaches - modern day's additions to our armamentarium in combating the EDCs are addressed. These additions have greater acceptance socially with lesser dissonance owing to reduced toxic by-products, lower health trepidations, better degradation, and ultimately the prevention of bioaccumulation. The positive impact of such new approaches on controlling the menace of EDCs has been outlaid. This review will shed light on sources of EDCs, their impact, significance, and the different remediation and bioremediation approaches, with a special emphasis on the recent trends and perspectives in using sustainable approaches for bioremediation of EDCs. Strict regulations to prevent the release of estrogenic chemicals to the ecosystem, adoption of combinatorial methods to remove EDC and prevalent use of bioremediation techniques should be followed in all future endeavors to combat EDC pollution. Moreover, the proper development, growth and functioning of future living forms relies on their non-exposure to EDCs, thus remediation of such chemicals present even in nano-concentrations should be addressed gravely.

A review on advances in removal of endocrine disrupting compounds from aquatic matrices: Future perspectives on utilization of agri-waste based adsorbents

In the recent past, a class of emerging contaminants particularly endocrine disrupting compounds (EDCs) in the aquatic environment have gained a lot of attention. This is due to their toxic behaviour, affecting endocrine activities in humans as well as among aquatic animals. Presently, there are no regulations and discharge limits for EDCs to preclude their negative impact. Furthermore, the conventional treatment processes fail to remove EDCs efficiently. This necessitates the need for more research aimed at development of advanced alternative treatment methods which are economical, efficient, and sustainable. This paper focusses on the occurrence, fate, toxicity, and various treatment processes for removal of EDCs. The treatment processes (physical, chemical, biological and hybrid) have been comprehensively studied highlighting their advantages and disadvantages. Additionally, the use of agri-waste based adsorption technologies has been reviewed. The aim of this review article is to understand the prospect of application of agri-waste based adsorbents for efficient removal of EDCs. Interestingly, research findings have indicated that the use of these low-cost and abundantly available agri-waste based adsorbents can efficiently remove the EDCs. Furthermore, the challenges and future perspectives on the use of agri-waste based adsorbents have been discussed.

Adsorptive removal of synthetic plastic components bisphenol-A and solvent black-3 dye from single and binary solutions using pristine pinecone biochar

The existing study deals with adsorptive removal of the endocrine-disrupting chemical bisphenol-A and toxic azo dye solvent black-3 from single and binary solutions. These two chemicals are commonly used as an additive in the synthetic plastic industries. Among the tested twenty pristine and modified biochars, the pristine pinecone biochar produced at 750 °C revealed greater bisphenol-A removal. Simulation of the experimental data obtained for bisphenol-A and dye removal from the single-component solution offered a best-fit to Elovich (R² > 0.98) and pseudo-second-order (R² > 0.99) kinetic models, respectively. Whereas for the bisphenol-A + dye removal from binary solution, the values for bisphenol-A adsorption were best suited to Elovich (R² > 0.98), while pseudo-second-order (R² > 0.99) for dye removal. Similarly, the two-compartment model also demonstrated better values (R² > 0.92) for bisphenol-A and dye removal from single and binary solutions with greater F_fast values (except for bisphenol-A in binary solution). The Langmuir isotherm model demonstrated the highest regression coefficient values (R² > 0.99) for bisphenol-A and dye removal with the highest adsorption capacity of 38.387 mg g^-1 and 346.856 mg g^-1, correspondingly. Besides, the co-existence of humic acid revealed a positive impact on bisphenol-A removal, while the dye removal rate was slightly hindered in presence of humic acid. The absorption process showed monolayer coverage of biochar surface with contaminants using a chemisorption mechanism with fast reactions between functional groups on the adsorbate and adsorbent. Whereas the adsorption mechanism was primarily controlled by hydrogen bonding, hydrophobic and π-π electron-donor-acceptor interactions as confirmed by FTIR, XPS, and pH investigations.

Respiratory Adsorption of Organic Pollutants in Wastewater by Superhydrophobic Phenolic Xerogels

Organogel adsorbents are widely used for the adsorption of hard-to-degrade organic pollutants in wastewater due to their natural affinity to the organic phase in water. In this study, phenolic xerogels (PF) synthesised in the ethylene glycol inorganic acid system are used as a backbone and superhydrophobic phenolic xerogels (ASO-PF) are obtained by grafting aminosilanes onto the PF backbone via the Mannich reaction. The modified ASO-PF not only retains the pore structure of the original PF (up to 90% porosity), but also has excellent superhydrophobic properties (water contact angle up to 153°). Owing to the unique pore structure, ASO-PF has excellent compression properties, cycling 50% compression deformation more than 10 times without being damaged, with a maximum compression deformation of up to 80%. A squeeze-suction-squeeze approach is proposed for selective adsorption of organic pollutants in homogeneous solutions based on the recyclable compression properties of ASO-PF. The ASO-PF is put under negative pressure by squeezing, and when the pressure is released, the adsorbed liquid enters the ASO-PF, where the organic pollutants are retained by the adsorption sites in the skeleton, and then the remaining water is discharged by squeezing. This breathing ASO-PF holds great promise for organic pollutant adsorption and recovery applications.

Activation of peroxymonosulfate by ZIFs derived Fe/Cu encapsulated N-doped carbon for bisphenol A degradation: The role of N doping

Bisphenol A (BPA) is a typical kind of endocrine disruption chemical, which has a negative effect on human health, and thus it is necessary to remove BPA from water. Herein, activation of peroxymonosulfate (PMS) by Fe, Cu-Coordinated ZIF-Derived Carbon Framework bifunctional catalyst (Fe/Cu@NC-x) fabricated via hydrothermal-calcination method for BPA removal. The physicochemical properties of Fe/Cu@NC-x were studied by X-ray diffraction, Transmission electron microscopy, Scanning electron microscopy, Raman Spectroscopy, Brunauer-Emmett Teller, and X-ray photoelectron spectroscopy. The effects of the Fe/Cu@NC-900 dosage and PMS concentration, initial pH, and co-existing anions on BPA degradation were evaluated. Under optimized factors (pH unadjusted, Fe/Cu@NC-900 = 0.2 g/L, and PMS = 0.75 g/L), the degradation efficiency of BPA can reach 98% after 30 min. In addition, the BPA degradation efficiency was different extents restrain by inorganic anions (SO₄^2- > Cl^- > HCO₃^- > NO₃^-). Furthermore, the free radicals (SO₄^-·, ·OH, and O₂^-·) and non-radical (¹O₂) contribute to rapid BPA degradation in Fe/Cu@NC-900/PMS system. This study presents a novel material with significant performance for the removal of organic pollutants.

Emerging Pollutants in Moroccan Wastewater: Occurrence, Impact, and Removal Technologies

The rapid growth of anthropogenic activities in recent decades has resulted in the appearance of numerous new chemical compounds in the environment, known as “emerging pollutants” (EPs) or “contaminants of emerging concern” (CECs). Although partially or not yet regulated or monitored, there is growing research interest in these EPs among the scientific community because of their bioaccumulation, persistence, and adverse effects. Among these, endocrine disruptors, pesticides, and pharmaceuticals can have harmful impacts on human health and the ecosystem. Conventional wastewater treatment technologies are not effective in removing these contaminants, allowing them to be released into the receiving environment. In order to improve the understanding of emerging pollutants, this review discusses the source, occurrence, and impacts of bisphenol A, atrazine, amoxicillin, and paracetamol as model molecules of emerging environmental pollutants, an issue that remains underrepresented in Morocco. Then, treatment methods for EPs are reviewed, including adsorption, advanced oxidation processes, biodegradation, and hybrid treatment. It is proposed that adsorption and photocatalysis can be used as simple, effective, and environmentally friendly technologies for their removal. Thus, we summarize some of the adsorbent and photocatalyst materials applied in recent work to control these pollutants. Towards the end of this paper, the development of inexpensive and locally available (Morocco) materials to remove these compounds from wastewater is considered.

Sonochemical activation-assisted biosynthesis of Au/Fe3O4 nanoparticles and sonocatalytic degradation of methyl orange

In this research, a sonochemical activation-assisted biosynthesis of Au/Fe₃O₄ nanoparticles is proposed. The proposed synthesis methodology incorporates the use of Piper auritum (an endemic plant) as reducing agent and in a complementary way, an ultrasonication process to promote the synthesis of the plasmonic/magnetic nanoparticles (Au/Fe₃O₄). The synergic effect of the green and sonochemical synthesis favors the well-dispersion of precursor salts and the subsequent growth of the Au/Fe₃O₄ nanoparticles. The hybrid green/sonochemical process generates an economical, ecological and simplified alternative to synthesizing Au/Fe₃O₄ nanoparticles whit enhanced catalytic activity, pronounced magnetic properties. The morphological, chemical and structural characterization was carried out by high- resolution Scanning electron microscopy (HR-SEM), Energy Dispersive X-Ray Spectroscopy (EDS) and X-Ray diffraction (XRD), respectively. Ultraviolet-visible (UV-vis) and X-ray photoelectron (XPS) spectroscopy confirm the Au/Fe₃O₄ nanoparticles obtention. The magnetic properties were evaluated by a vibrating sample magnetometer (VSM). Superparamagnetic behavior, of the Au/ Fe₃O₄ nanoparticles was observed (M_s = 51 emu/g and H_c = 30 Oe at 300 K). Finally, the catalytic activity was evaluated by sonocatalytic degradation of methyl orange (MO). In this stage, it was possible to achieve a removal percentage of 91.2% at 15 min of the sonocatalytic process (160 W/42 kHz). The initial concentration of the MO was 20 mg L^-1, and the Fe3O4-Au dosage was 0.075 gL^-1. The MO degradation process was described mathematically by four kinetic adsorption models: Pseudo-first order model, Pseudo-second order model, Elovich and intraparticle diffusion model.

A Promising Solution for Food Waste: Preparing Activated Carbons for Phenol Removal from Water Streams

Phenol and its derivatives are highly toxic chemicals and are widely used in various industrial applications. Therefore, the industrial wastewater streams must be treated to lower the concentration of phenol before discharge. At the same time, food waste has been a major environmental problem globally and the scientific community is eagerly seeking effective management solutions. The objective of this study was to understand the potential of utilizing food waste as a renewable and sustainable resource for the production of activated carbons for the removal of phenol from water streams. The food waste was pyrolyzed and physically activated by steam. The pyrolysis and activation conditions were optimized to obtain activated carbons with high surface area. The activated carbon with the highest surface area, 745 m2 g-1, was derived via activation at 950 °C for 1 h. A detailed characterization of the physicochemical and morphological properties of the activated carbons derived from food waste was performed and a comprehensive adsorption study was conducted to investigate the potential of using the activated carbons for phenol removal from water streams. The effects of pH, contact time, and initial concentration of phenol in water were studied and adsorption models were applied to experimental data to interpret the adsorption process. A remarkable phenol adsorption capacity of 568 mg g-1 was achieved. The results indicated that the pseudo-second-order kinetic model was better over the pseudo-second-order kinetic model to describe the kinetics of adsorption. The intraparticle diffusion model showed multiple regions, suggesting that the intraparticle diffusion was not the sole rate-controlling step of adsorption. The Langmuir isotherm model was the best model out of Freundlich, Temkin, and Dubinin-Radushkevich models to describe the phenol adsorption on activated carbons derived from food waste. This study demonstrated that food waste could be utilized to produce activated carbon and it showed promising capacity on phenol removal.

Removal of bisphenol A from aqueous media using a highly selective adsorbent of hybridization cyclodextrin with magnetic molecularly imprinted polymer

In this study, a unique magnetic molecularly imprinted polymer (MMIP) adsorbent towards bisphenol A (BPA) as a template molecule was developed by bulk polymerization using β-cyclodextrin (β-CD) as a co-monomer with methacrylic acid (MAA) to form MMIP MAA-βCD as a new adsorbent. β-CD was hybridized with MAA to obtain water-compactible imprinting sites for the effective removal of BPA from aqueous samples. Benzoyl peroxide and trimethylolpropane trimethacrylate were used as the initiator and cross-linker, respectively. The adsorbents were characterized by Fourier transform infrared spectroscopy, scanning electronic microscopy, transmission electron microscopy, vibrating sample magnetometer, Brunauer-Emmett-Teller and X-ray diffraction. 1H nuclear magnetic resonance spectroscopy was used to characterize the MAA-βCD and BPA-MAA-βCD complex. Several parameters influencing the adsorption efficiency of BPA such as adsorbent dosage, pH of sample solution, contact time, initial concentrations and temperature as well as selectivity and reusability study have been evaluated. MMIP MAA-βCD showed significantly higher removal efficiency and selective binding capacity towards BPA compared to MMIP MAA owing to its unique morphology with the presence of β-CD. The kinetics data can be well described by the pseudo second-order kinetic and Freundlich isotherm and Halsey models best fitted the isotherm data. The thermodynamic studies indicated that the adsorption reaction was a spontaneous and exothermic process. Therefore, MMIP based on the hybrid monomer of MAA-βCD shows good potential of a new monomer in molecularly imprinted polymer preparation and can be used as an effective adsorbent for the removal of BPA from aqueous solutions.

Production of modified sunflowers seed shells for the removal of bisphenol A

In this present study, an abundant, available lignocellulosic biomass, sunflower seed shells, SSS, was used as a precursor to prepare an effective eco-adsorbent by treatment with H2SO4. A study of the surface characteristics of raw and acid-treated SSS (ACS) has shown that the addition of H2SO4 greatly affected the physicochemical properties of the obtained eco-adsorbent, improving the BET surface area from 6.106 to 27.145 m2 g-1 and surface oxygen-rich functional groups. Batch experiments were performed to assess the removal efficiency of a phenolic compound, bisphenol A (BPA), on the adsorbents. Several parameters were evaluated and are discussed (contact time, pollutant concentration, adsorbent dosage, and pH), determining that the adsorption efficiency of BPA onto SSS was notably improved, from 20.56% to 87.81% when a sulfuric acid solution was used. Different canonical and stochastic isotherm models were evaluated to predict the experimental behaviour. A dynamic study was performed based on the models of reaction kinetics and those of mass transfer. The results showed that the adsorption kinetics of BPA obey the fractal like-kinetic model of Hill for all experimental conditions. The equilibrium data are well suited to the Hill-Sips isotherm model with a determination coefficient >0.999. The kinetic modelling also indicates that the adsorption processes of BPA onto ACS are exothermic and proceed through a physical mechanism. A mass transfer study, using simplified models, proved that the process is controlled by intraparticle and film resistances to mass transfer of the BPA.

Fabrication and Adsorption Optimization of Novel Magnetic Core-shell Chitosan/Graphene Oxide/β-cyclodextrin Composite Materials for Bisphenols in Aqueous Solutions

A novel magnetic composite material, Fe3O4@SiO2/chitosan/graphene oxide/β-cyclodextrin (MCGC), was prepared by multi-step methods. Various methods were used to systematically characterize the morphology, composition, structure, and magnetic properties of MCGC. The results obtained show that the composite material has good morphology and crystal structure and can be separated quickly by an external magnetic field. The operation is relatively easy, and the raw materials used to prepare this material are economical, easy to obtain, and environmentally friendly. The performance and adsorption mechanism for using this material as an adsorbent to remove bisphenol A (BPA) and bisphenol F (BPF) from water were studied. The adsorption parameters were optimized. Under optimal conditions, MCGC was found to remove more than 90% of BPA and BPF in a mixed solution (20 mg/L, 50 mL); the adsorption process for BPA and BPF on MCGC was found to follow a Redlich-Peterson isotherm model and Pseudo-second-order kinetic model. The adsorption mechanism for MCGC may involve a combination of various forces. Recycling experiments showed that after five uses, MCGC retained a more than 80% removal effect for BPA and BPF, and through real sample verification, MCGC can be used for wastewater treatment. Therefore, MCGC is economical, environmentally friendly, and easy to separate and collect, and has suitable stability and broad application prospects.

Unravelling the Environmental Application of Biochar as Low-Cost Biosorbent: A Review

In this age, a key target for enhancing the competitiveness of the chemical, environmental and biotechnology industries is to manufacture high-value products more efficiently and especially with significantly reduced environmental impact. Under this premise, the conversion of biomass waste to a high-value added product, biochar, is an interesting approach under the circular economy principles. Thus, the improvements in the biochar production and its new and innovative uses are hot points of interest, which are the focus of vast efforts of the scientific community. Biochar has been recognized as a material of great potential, and its use as an adsorbent is becoming a reliable strategy for the removal of pollutants of different streams, according to its high adsorption capacity and potential to eliminate recalcitrant compounds. In this review, a succinct overview of current actions developed to improve the adsorption capability of biochar, mainly of heavy metal and organic pollutants (dyes, pharmaceuticals and personal care products), is summarized and discussed, and the principal adsorption mechanisms are described. The feedstock and the production procedure are revealed as key factors that provide the appropriate physicochemical characteristics for the good performance of biochar as an adsorbent. In addition, the modification of the biochar by the different described approaches proved their feasibility and became a good strategy for the design of selective adsorbents. In the last part of this review, the novel prospects in the regeneration of the biochar are presented in order to achieve a clean technology for alleviating the water pollution challenge.

Magnetic Nanoparticles of Fe3O4 Biosynthesized by Cnicus benedictus Extract: Photocatalytic Study of Organic Dye Degradation and Antibacterial Behavior

Currently, the use of sustainable chemistry as an ecological alternative for the generation of products or processes that are free of a polluting substance has assumed a preponderant role. The aim of this work is to propose a bioinspired, facile, low cost, non-toxic, and environmentally friendly alternative to obtaining magnetic nanoparticles with a majority phase of magnetite (Fe3O4). It is important to emphasize that the synthesis was based on the chemical reduction through the Cnicus benedictus extract, whose use as reducing agent has not been reported in the synthesis of iron oxides nanoparticles. In addition, the Cnicus benedictus is an abundant endemic plant in Mexico with several medicinal properties and a large number of natural antioxidants. The obtained nanoparticles exhibited significant magnetic and antibacterial properties and an enhanced photocatalytic activity. The crystallite size of the Fe3O4 nanoparticles (Fe3O4 NP’s) was calculated by the Williamson-Hall method. The photocatalytic properties of the Fe3O4 NP’s were studied by kinetics absorptions models in the Congo red (CR) degradation. Finally, the antibacterial effects of the Fe3O4 NPs were evaluated mediated the Kirby–Bauer method against Escherichia coli and Staphylococcus aureus bacteria. This route offers a green alternative to obtain Fe3O4 NPs with remarkable magnetic, photocatalytic, and antibacterial properties.