A sodium dichloroisocyanurate-based conditioning process for the improvement of sludge dewaterability and mechanism studies

A synergistic approach integrating potassium ferrate oxidation with polyacrylamide flocculation to enhance sludge dewatering and its mechanisms

Sludge dewatering is a critical phase in sludge treatment and disposal, significantly impacting storage, transportation, and subsequent handling. This study introduces an innovative approach combining potassium ferrate (PF) oxidation and polyacrylamide (PAM) flocculation to synergistically enhance sludge dewatering efficiency. PF disrupts EPS and releases bound water, while PAM restores floc structure, addressing the limitations of standalone oxidation. Initial PF conditioning significantly reduced sludge water content (Wc) to 75.18 %, attributed to the oxidative breakdown of extracellular polymeric substances (EPS) and the release of bound water. However, higher PF doses increased specific filtration resistance (SFR) and capillary suction time (CST), indicating deteriorated filterability. The subsequent addition of PAM mitigated these issues, further reducing Wc to 73.64 %, SFR from 12.75 × 1012 m/kg to 3.62 × 1012 m/kg, and reduced CST from 88.95 s to 32.3 s, demonstrating marked improvements in dewatering performance. Characterization studies revealed the underlying mechanisms: PF-induced sludge fragmentation and EPS degradation, followed by PAM-mediated re-flocculation and structural reorganization. Further, applying XDLVO theory and Flory-Huggins lattice theory revealed changes in the sludge's surface hydrophilicity and the system's chemical potential, improving SFR and enhancing dewatering efficiency while reducing moisture content. This investigation not only offers an innovative dewatering approach but also underpins the mechanism of improved dewaterability.

New insights into mechanism of enhancing biogas residue dewaterability using carbon quantum dots and biochar composites under visible light through electrochemical approach

This study investigated the treatment of biogas residue using a catalytic activation system with carbon quantum dots/biochar (CQDs/BC) and H2O2, driven by visible light. Results indicated that the charge transfer resistance (Rct) of CQDs/BC was 74.5 % lower than that of CQDs, with improved charge separation rates and enhanced light absorption. In the CQDs/BC + H2O2 system, relative capillary suction time (CST/CST0) and water content of biogas residue cake (Wc) decreased by 56.6 % and 8.9 % compared to control groups, respectively. CQDs/BC generated photogenerated electrons (e-) and holes (h+) under visible light, converted oxygen species, including ·OH, ·O2-, and 1O2, and considerably improved the oxidizing capacity of the system. The Rct of the treated biogas residue was 62.2 % lower than that of the original biogas residue and showed a significant correlation with Wc (r = 1.0, p < 0.001). These findings underscored that biogas residue Rct can be used as an indicative parameter of its dewatering performance.

Physical conditioning methods for sludge deep dewatering: A critical review

Sludge is an inevitable waste product of sewage treatment with a high water content and large volume, it poses a significant threat of secondary pollution to both water and the atmosphere without proper disposal. In this regard, dewatering has emerged as an attractive method in sludge treatment, as it can reduce the sludge volume, enhance its transportability and calorific value, and even decrease the production of landfill leachate. In recent years, physical conditioning methods including non-chemical conditioners or energy input alone, have been extensively researched for their potential to enhance sludge dewatering efficiency, such as thermal treatment, freeze-thaw, microwave, ultrasonic, skeleton builders addition, and electro-dewatering, as well as combined methods. The main objective of this paper is to comprehensively evaluate the dewatering capacity of various physical conditioning methods, and identify key factors affecting sludge dewatering efficiency. In addition, future research anticipated directions and outlooks are proposed. This work is expected to provide valuable insights for developing efficient, eco-friendly, and low-energy consumption techniques for deep sludge dewatering.

Transcriptomic analysis and oxidative stress induced by sodium dichloroisocyanurate in the intestine of Phascolosoma esculenta

Sodium dichloroisocyanurate (NaDCC, C3Cl2N3NaO3) is a solid chlorine-containing product that is widely used as a disinfectant in living environments, which has potential toxic effects on human and rats. Phascolosoma esculenta is a species native to the southeast coast of China and can be used as an indicator organism. In the present study, 150 P. esculenta were used to determine the LC50 of NaDCC for P. esculenta, then 100 P. esculenta were used to analysis the change of histopathology, oxidative stress and transcriptome after NaDCC exposure. The results showed that the LC50 of NaDCC for 48 h was 50 mg/L. NaDCC stress induced pathological events in P. esculenta, including blisters, intestinal structural damage and epithelial cell ruptured or even loss. The highest and lowest intestinal activity of superoxide dismutase in individual survivors was detected at 12 h and 72 h, respectively. Malondialdehyde levels in the intestine declined gradually from 3 h and increased at 9 h, and peaked at 12 h. Total antioxidant capacity declined at 3 h and dropped below the levels of control group after 9 h. Transcriptome sequencing analysis yielded a total of 48.65 Gb of clean data. A total of 34,759 new genes were found including 957 differentially expressed genes (DEGs). The DEGs were significantly enriched in ferroptosis, response to chemicals, response to stress, immune system, ion transport, cell death, oxidation-reduction, cellular homeostasis, protein ubiquitination, and protein neddylation. Additionally, the levels of detoxification enzymes, such as glutathione-S-transferase, cytochrome P450, ABC, UDP-glycosyltransferase and SLC transporters of endogenous and exogenous solutes were significantly changed. Overall, the results provide reference for reasonable use of disinfectants during farming, and also provide insight into the mechanisms related to NaDCC toxicity in P. esculenta.

Research progress in improving sludge dewaterability: sludge characteristics, chemical conditioning and influencing factors

Sludge from wastewater treatment processes with high water content and large volume has become an inevitable issue in environmental management. Due to the challenging dewatering properties of sludge, current mechanical dewatering methods are no longer sufficient to meet the escalating water content standards of sludge. This paper summarizes the characteristics of various sludge and raises reasons for the their dewaterability differences. Affected by extracellular polymeric substances, biological sludge is hydrophilic and negatively charged, which limits the dewatering degree. The rheological properties, flocs, ionic composition, and solid phase concentration of the sludge also influence the dewatering to some extent. For these factors, the chemical conditioning measures with simple operation and excellent effect improve its dewaterability, which mainly include flocculation/coagulation, acid/alkali treatment, advanced oxidation, surfactant treatment and combined treatment. There is a growing necessity to explore the development of new chemical conditioning agents, even though traditional agents continue to remain widely used. However, the development of these new agents should prioritize finding a balance between various factors such as efficiency, effectiveness, ease of operation, environmental safety, and cost-effectiveness. Electrochemical dewatering enhances solid-liquid separation, and its coupling with chemical conditioning is also an excellent means to further reduce water content. In addition, the improvement of press filter is an effective way, which is influenced by pressure, processing time, sludge cake thickness and pore structure, filter media etc. In general, it is essential to develop new conditioning agents and enhance mechanical filtration press technology based on a thorough understanding of various sludge properties. Concurrently, an in-depth study of the principles of mechanical pressure filtration will contribute to establishing a theoretical foundation for effective deep sludge dewatering and propel further advancements in this field.

Spherical Polyelectrolyte Brushes as Flocculants and Retention Aids in Wet-End Papermaking

As the criteria of energy conservation, emission reduction, and environmental protection become more important, and with the development of wet-end papermaking, developing excellent retention aids is of great significance. Spherical polyelectrolyte brushes (SPBs) bearing polyelectrolyte chains grafted densely to the surface of core particle have the potential to be novel retention aids in wet-end papermaking not only because of their spherical structure, but also due to controllable grafting density and molecular weight. Such characteristics are crucial in order to design multi-functional retention aids in sophisticated papermaking systems. This review presents some important recent advances with respect to retention aids, including single-component system and dual-component systems. Then, basic theory in papermaking is also briefly reviewed. Based on these advances, it emphatically describes spherical polyelectrolyte brushes, focused on their preparation methods, characterization, conformation, and applications in papermaking. This work is expected to contribute to improve a comprehensive understanding on the composition, properties, and function mechanisms of retention aids, which helps in the further investigation on the design of novel retention aids with excellent performance.

Disinfectant sodium dichloroisocyanurate synergistically strengthened sludge acidogenic process and pathogens inactivation: Targeted upregulation of functional microorganisms and metabolic traits via self-adaptation

Harmless and resourceful treatment of waste activated sludge (WAS) have been the crucial goal for building environmental-friendly and sustainable society, while the synergistic realization approach is currently limited. This work skillfully utilized the disinfectant sodium dichloroisocyanurate (NaDCC) to simultaneously achieve the pathogenic potential inactivation (decreased by 60.1 %) and efficient volatile fatty acids (VFAs) recovery (increased by 221.9 %) during WAS anaerobic fermentation in rather cost-effective way (Chemicals costs:0.4 USD/kg VFAs versus products benefits: 2.68 USD/kg chemical). Mechanistic analysis revealed that the C=O and NCl bonds in NaDCC could spontaneously absorb sludge (binding energy -4.9 kJ/mol), and then caused the sludge disintegration and organic substrates release for microbial utilization due to the oxidizability of NaDCC. The disruption of sludge structure along with the increase of bioavailable fermentation substrates contributed to the selectively regulation of microbial community via enriching VFAs-forming microorganisms (e.g., Pseudomonas and Streptomyces) and reducing VFAs-consuming microorganisms, especially aceticlastic methanogens (e.g., Methanothrix and Methanospirillum). Correspondingly, the metabolic functions of membrane transport, substrate metabolism, pyruvate metabolism, and fatty acid biosynthesis locating in the central pathway of VFAs production were all upregulated while the methanogenic step was inhibited (especially acetate-type methanogenic pathway). Further exploration unveiled that for those enriched functional anaerobes were capable to activate the self-adaptive systems of DNA replication, SOS response, oxidative stress defense, efflux pump, and energy metabolism to counteract the unfavorable NaDCC stress and maintain high microbial activities for efficient VFAs yields. This study would provide a novel strategy for synergistic realization of harmless and resourceful treatment of WAS, and identify the interrelations between microbial metabolic regulations and adaptive responses.

Roles of catalytic ozonation by bimetallic Fe/Ce loading sludge-derived biochar in amelioration of sludge dewaterability: Performance and implementation mechanisms

In this study, an environmentally friendly alternative was developed using catalytic ozonation by sludge-derived biochar loaded with bimetallic Fe/Ce (O3/SBC-FeCe) for enhanced sludge dewatering. The results indicated that the lowest capillary suction time (CST) of 20.9 s and water content of dewatered sludge cake (Wc) of 64.09% were achieved under the dosage of 40 mg O3/g dry solids (DS) and 0.4 g SBC-FeCe/g DS which were considered as the optimum condition. In view of excellent electron exchanging capacity of SBC-FeCe with rich Lewis acid sites and conversions of valence sates of Fe and Ce, more O3 were decomposed into reactive oxygen species under the catalytic action of SBC-FeCe, which strengthened oxidizing capacity. Enhanced oxidation rendered sludge cells inactivation and compact network structure rupture releasing intracellular water and organic substances. Subsequently, hydrophilic organic matters were attacked and eliminated lessening sludge viscosity and colloidal forces and intensifying hydrophobicity and flowability. In addition, changes of sludge morphology suggested that sludge roughness was alleviated, structural strength and compressibility were raised and porous and retiform structure was constructed providing channels for water outflow by adding skeleton builder of SBC-FeCe. Overall, the synergistic interaction of strengthened oxidation and skeleton construction improved sludge dewaterability.

An all-organic conditioning method to achieve deep dewatering of waste activated sludge and the underlying mechanism

Among the common treatment/disposal routes of excessive activated sludge from municipal wastewater treatment plant, dewatering process functions as an essential pre-/post-treatment for volume minimization and transportation facilitation. Since inorganic coagulants have long been criticized for their high dosage and solid residue in sludge cake, there is an urgent need for investigations regarding the potential of applying organic chemicals as the conditioner. In this study, combined use of poly dimethyldiallylammonium chloride (PDMD) and tannic acid (TA) were investigated as an all-organic co-conditioning method for sewage sludge pre-treatment. Results showed that this all-organic conditioning strategy can effectively improve the dewaterability of sewage sludge. The capillary suction time reduced from 128.8 s to 23.1 s, and the filtration resistance reduced from 1.24 × 10¹² cm/g to 7.38 × 10¹⁰ cm/g. The moisture content of dewatered sludge cake decreased to as low as 55.83%, showing the highest dewatering efficiency reported so far. In addition, the combination of PDMD and TA maximized the treating efficiency with very limited consumption of conditioners (added up to 4% of total solid). Based on the physic-chemical and rheological property investigation, it was proposed that the intermediate molecular weight polymer-based flocculation process and the TA agent-based protein precipitation process, could remarkably strengthen the compactness and structure robustness of sludge. In all, this PDMD-TA-based conditioning method suggested practical significance in consideration of its cost-effectiveness and disposal convenience of sludge cake.

Effect of the degradation performance on carbon tetrachloride by anaerobic co-metabolism under different external energy sources

In this research, a comprehensive study was carried out on the removal of carbon tetrachloride (CT) in the anaerobic co-metabolism (ACM) reactor. The experiments showed that when the hydraulic retention time (HRT) was 36 h, pH was 7, and influent CT was 2.5mg/L, the average removal efficiency reached 82.45 ± 2.56% in the glucose co-metabolism substrate reactor, exhibiting a dramatic excellent difference in reaction performance from the other two reactors (p < 0.05) and a favorable tolerance on the CT shock loading. The content of extracellular polymeric substances (EPS) and volatile fatty acids (VFA) demonstrated that glucose could supply more energy to protect the microorganisms, which was the appropriate external energy source. Moreover, microbial community structure and biostatistics analysis demonstrated that Pseudomonas was the most important dechlorination bacteria in ACM reactors, which might via dehalogenation process mediate the transformation of CT. The succession of methanogenic bacteria further demonstrated that CT degradation using co-digestion require to destroy hydrogenotrophic methane generation pathway and the external energy substances could make up the lack of hydrogen in the treatment of CT. The change of intermediate products hinted that anaerobic dechlorination process of CT in an ACM reactor was a sequential dechlorination process, and major transformation products measured were CF. Overall, this study has improved our understanding of the roles of CT degradation process in ACM reactors.

Polyhexamethylene biguanidine used as a new type sewage sludge conditioning agent: Effect on sludge dewaterability and mechanism

Dewatering is the basic procedure of sludge treatment and disposal, and environmentally friendly and efficient sludge conditioning methods are urgently needed. Polyhexamethylene biguanide (PHMB), a broad-spectrum germicide used in daily life and medicine, was proposed as a sludge conditioning reagent in this paper, and its effect on waste activated sludge (WAS) dewaterability was studied for the first time. Results showed that PHMB can improve sludge dewatering performance, and capillary suction time (CST) and water content (Wc) of dewatered sludge cake was reduced by 78.11% and 13.37% with 100 mg PHMB/g dry sludge (DS). Further investigation revealed that the sludge properties changed pronouncedly after PHMB conditioning, the bound water content decreased from 1.58 g/g DS to 1.29 g/g DS, the particle size (D50) increased from 34.3 μm to 39.2 μm, the zeta potential increased from -20.96 mV to -3.36 mV, and the flowability increased whilst the viscosity decreased. When the dose of PHMB was lower than 50 mg/g DS, it mainly reacted with extracellular polymeric substance (EPS), resulting in a decrease in its content, which was also manifested by the decrease of molecular weights. However, when the dose reached 100 mg/g DS, PHMB would disrupt the cytomembranes of microorganisms and release cellular contents, reflected by a corresponding growth of EPS contents and the intensity of Fourier transform infrared (FTIR) spectrum. And the scanning electron microscope (SEM) images showed that PHMB conditioning made cracks and holes on sludge microstructures. The key mechanism of PHMB improving sludge dewaterability was inferred as "organic molecules disrupting" and "sludge particles flocculating". These findings demonstrate that PHMB is promising to be a novel, effective, and environmentally friendly sludge conditioning reagent.

A novel conditioning approach for amelioration of sludge dewaterability using activated carbon strengthening electrochemical oxidation and realized mechanism

Sludge dewatering is an essential process for reduction of sludge volume to decrease cost of ultimate disposal. In this study, a novel method using activated carbon (AC) strengthening electrochemical (EC) treatment (EC/AC) was adopted to improve greatly sludge dewaterability. It was shown that capillary suction time (CST) and water content of dewatered sludge cake (Wc) were reduced to 55.9 ± 1.24 s and 64.3 ± 1.23%, respectively, under the optimal conditions of EC voltage 20 V, EC time 30 min and 0.2 g/g dry solid (DS) AC. AC with rich functional groups as "the third electrode" intensified electrooxidation by forming multiple microelectrodes and electron transfer capacity and conductivity of sludge were strengthened by AC in EC system, which were illustrated by electrochemical analysis. It could be found that zeta potential and particle size were increased and surface roughness was reduced after EC/AC treatment intensifying sludge hydrophobicity. Form the results of rheological behaviors of sludge, flowability was strengthened and viscosity was weakened under the conditioning of EC/AC. Besides, colloidal force and gel-like network strength were lessened, which was also verified by organic matters and percentage of inviable cells. At the same time, intracellular matters were released and degraded and bound water was released converting into free water. In addition, sludge compressibility and structural strength were increased and porous structure was formed facilitating water outflow via addition of mesoporous AC as skeleton builder, which eventually led to an improved separation efficiency of solid-water and sludge dewaterability. The results of heavy metals suggested that sludge cake after EC/AC treatment was favorable for land application.

A comprehensive study on simultaneous enhancement of sludge dewaterability and elimination of polycyclic aromatic hydrocarbons by Fe2+ catalyzing O3 process

Simultaneous removal of polycyclic aromatic hydrocarbons (PAHs) in the process of enhancement of sludge dewaterability via oxidation of hydroxyl radicals (•OH) and flocculation of Fe³⁺ by Fe²⁺-catalyzing O₃ were investigated as a novel research focus. The results showed that capillary suction time (CST) and water content of dewatered sludge cake (Wc) were reduced from 57.9 s and 85.1% to 13.6 s and 69.65% under the optimum usage of 60 mg/g dry solids (DS) O₃ and 80 mg/g DS FeSO₄, respectively. The relevant dewatering mechanism of Fe²⁺-catalyzing O₃ treatment was elucidated. It was found that extracellular polymeric substances-bound (EPS-bound) and intracellular water was dramatically released through destroying sludge cells and EPS gel-like structure by produced •OH. In addition, the results of X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR) and ¹³C NMR spectroscopy revealed that •OH oxidized and mineralized hydrophilic organic matters intensifying hydrophobicity of sludge surface. Moreover, Fe³⁺ generated by oxidation of Fe²⁺ agglomerated fragmented fine particles into large aggregates and decreased exposure of hydrophilic sites by neutralizing negative charge, which promoted water-solids separation. Meanwhile, sludge surface roughness was decreased which was determined by material type upright confocal laser microscope (CLM). As a consequence, •OH and Fe³⁺ were mainly responsible for enhancement of sludge dewaterability. Moreover, more than 40% of removal rate of PAHs was accomplished by Fe²⁺-catalyzed O₃ treatment mitigating the environmental risks of PAHs spread.

Enhanced waste activated sludge dewaterability by the ozone-peroxymonosulfate oxidation process: Performance, sludge characteristics, and implication

Dewatering treatment is an essential step to diminish sludge volume, cut down transportation costs, and improve subsequent disposal efficiency. In this study, ozone-peroxymonosulfate (O₃/PMS) oxidation process was employed to ameliorate sludge dewaterability. Sludge capillary suction time (CST) and water content (Wc) of dewatered sludge cake could reduce from 70.5 s and 81.93% to 26.7 s and 65.65%, respectively, under the optimal dosage of 30 mg/g TS O₃ and 0.4 mmol/g TS PMS. The increased sludge zeta potential, particle size, and fluidity promoted sludge dewatering performance apparently. The decreased hydrophilic, fluorescent EPS components and proteins/peptides-like + Lipids percentage in EPS as well as the ratio of α-helix/(β-sheet + random coil) of treated EPS protein secondary structure was greatly responsible for the enhanced sludge dewaterability. SO₄^- and OH were detected in ozone-peroxymonosulfate process to crack sludge flocs, eliminate hydrophilic substances and liberate bound water. Moreover, the concentrations of both heavy metals and polycyclic aromatic hydrocarbons (PAHs) of sludge after O₃/PMS conditioning were decreased, and the stability and toxicity of heavy metals were also reduced, except Zn. In conclusion, this work offered a comprehensive insight based on ozone-peroxymonosulfate (O₃/PMS) advanced oxidation for improving the sludge dewaterability and environmental implication.

Insight into the roles of electrolysis-activated persulfate oxidation in the waste activated sludge dewaterability: Effects and mechanism

Sludge dewatering, as one of the most important steps of sludge treatment, can facilitate transportation and improve disposal efficiency by reducing the volume of sludge. This study investigated the effects of electrolysis-activated persulfate oxidation on improving sludge dewaterability. The results indicated that the sludge capillary suction time (CST) and water content of dewatered sludge cake (Wc) reduced from 93.7 s and 87.8% to 9.7 s and 68.3% respectively at the optimized process parameters: electrolysis voltage of 40 V, electrolysis time of 20 min, and 1.2 mmol/g TS S₂O₈^2-. Correlation analysis revealed that the enhancement of sludge dewaterability was closely associated with the increased floc size and zeta potential, decreased protein content in three-layers extracellular polymeric substances (EPS) and viscosity (R = -0.868, p = 0.002; R = -0.703, p = 0.035; R ≥ 0.961, p < 0.001; R = 0.949, p < 0.001). Four protein fluorescence regions in EPS were analyzed by three-dimensional excitation-emission matrix parallel factor (3D-EEM-PARAFAC). The protein secondary structure was changed after the treatment, and the reduction of α-helix/(β-sheet + random coil) indicated that more hydrophobic sites were exposed. Analysis by X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR) and rheological test demonstrated that the hydrophilic functional groups of the sludge were decreased and the sludge mobility was significantly enhanced after the treatment with electrolysis-activated persulfate oxidation. Moreover, bound water was converted to free water during SO₄·^- and ·OH generated by electrolysis-activated persulfate degraded EPS and attacked sludge cells. Meanwhile, scanning electron microscopy (SEM) images revealed that the treated sludge formed porous channel structures, which promoted the flowability of the water. These findings provide a new insight based on electrolysis-activated persulfate oxidation in sludge treatment for enhancing sludge dewaterability.

Insights into the enhancement of waste activated sludge dewaterability using sodium dichloroisocyanurate and dodecyl dimethyl ammonium chloride: Performance, mechanism, and implication

Sludge dewatering is essential for reduction of sludge volume to cut the cost of transportation and disposal. Combined application of sodium dichloroisocyanurate (DCCNa) and dodecyl dimethyl ammonium chloride (DDAC) was attempted to promote sludge dewatering performance and physicochemical properties for the first time in this work. The results showed that capillary suction time (CST) and moisture content of dewatered sludge cake (Mc) decreased to 15.9 s and 61.54% compared to 144.5 s and 90.39% of raw sludge, respectively, with the addition of optimal dosage of 150 mg DCCNa/g DS and 125 mg DDAC/g DS. The conditioning mechanism of combined treatment was elucidated by investigating the variations of extracellular polymeric substances (EPS) composition, flocs morphological structure, rheological behavior, moisture distribution and Fourier transform infrared (FTIR) of sludge. It could be found that sludge floc cells were decomposed and bound water was released after DCCNa treatment. The bound water content was further decreased with the presence of DDAC. In addition, DDAC not only increased the zeta potential and flowability of sludge, but also reduced the surface tension and interact with oxygen-containing functional groups in sludge. As a result, the sludge dewaterability was significantly improved. Moreover, the calorific value analysis of dewatered sludge cake indicated that combined conditioning of DCCNa and DDAC presented the advantage of incineration disposal.