Two-stage partial nitrification-Anammox process for nitrogen removal from slaughterhouse wastewater: Evaluation of the nitrogen loading rate and microbial community analysis

Deciphering key microbes and their interactions within anaerobic ammonia oxidation systems

The stability of anaerobic ammonium oxidation (anammox) performance is inseparably linked to the dynamic equilibrium of microbial interactions. However, understanding of the key microbes within anammox systems remains limited. Through the analysis of 186 16S rRNA datasets combined with various ecological analysis methods, this study identified key microbes in the anammox process. Interactions between Candidatus_Kuenenia and other key microbes are the most significant with greater tolerance to differing water quality, while Candidatus_Jettenia have higher habitat specificity. Under adverse conditions, anammox bacteria can reduce the impact of unfavorable environments by enhancing interactions with certain microbes. This study comprehensively reviews the main functions of key microbes in the anammox system and their interactions, and summarizes several common interaction mechanisms, providing new insights for understanding the startup and stable operation of the anammox process.

Anaerobic treatment of nitrogenous industrial organic wastewater by carbon-neutral processes integrated with anaerobic digestion and partial nitritation/anammox: Critical review of current advances and future directions

Anaerobic digestion combined with partial nitritation/anammox technology holds promising potential for the carbon-neutral treatment of nitrogenous industrial organic wastewater, boasting remarkable advantages in effective removal of both organic matters and nitrogen, bio-energy recovery and carbon emission reduction. This study provides a concise overview of the development and advantages of anaerobic digestion combined with partial nitritation/anammox technology for treating nitrogenous industrial organic wastewater. The process excels in removing organic matter and nitrogen, recovering bio-energy, and reducing carbon emissions, compared to traditional physicochemical and biological methods. Case studies highlight its energy-saving and efficient attributes, especially for carbon-neutral nitrogen removal. Challenges for achieving stable operation in the future are discussed, and the study offers insights into the broader application of this integrated process in industrial wastewater treatment.

Effects of nanoparticles on anaerobic, anammox, aerobic, and algal-bacterial granular sludge: A comprehensive review

Nanoparticles (NPs) are of significant interest due to their unique properties, such as large surface area and high reactivity, which have facilitated advancements in various fields. However, their increased use raises concerns about environmental impacts, including on wastewater treatment processes. This review examines the effects of different nanoparticles on anaerobic, anammox, aerobic, and algal-bacterial granular sludge used in wastewater treatment. CeO2 and Ag NPs demonstrated adverse effects on aerobic granular sludge (AGS), reducing nutrient removal and cellular function, while anaerobic granular sludge (AnGS) and anammox granular sludge (AxGS) showed greater resilience due to their higher extracellular polymeric substance (EPS) content. TiO2 NPs had fewer negative effects on algal-bacterial granular sludge (ABGS) than on AGS, as algae played a crucial role in enhancing EPS production and stabilizing the granules. The addition of Fe3O4 NPs significantly enhanced both aerobic and anammox granulation by reducing granulation time, promoting microbial interactions, improving granule stability, and increasing nitrogen removal efficiency, primarily through increased EPS production and enzyme activity. However, Cu and CuO NPs exhibited strong inhibitory effects on aerobic, anammox, and anaerobic systems, affecting EPS structure, cellular integrity, and microbial viability. ZnO NPs demonstrated dose-dependent toxicity, with higher concentrations inducing oxidative stress and reducing performance in AGS and AnGS, whereas AxGS and ABGS were more tolerant due to enhanced EPS production and algae-mediated protection. The existing knowledge gaps and directions for future research on NPs are identified and discussed.

Fimbriimonadales performed dissimilatory nitrate reduction to ammonium (DNRA) in an anammox reactor

Bacteria belonging to the order Fimbriimonadales are frequently detected in anammox reactors. However, the principal functions of these bacteria and their potential contribution to nitrogen removal remain unclear. In this study, we aimed to systematically validate the roles of Fimbriimonadales in an anammox reactor fed with synthetic wastewater. High-throughput 16S rRNA gene sequencing analysis revealed that heterotrophic denitrifying bacteria (HDB) were the most abundant bacterial group at the initial stage of reactor operation and the abundance of Fimbriimonadales members gradually increased to reach 38.8 % (day 196). At the end of reactor operation, Fimbriimonadales decreased to 0.9 % with an increase in anammox bacteria. Correlation analysis demonstrated nitrate competition between Fimbriimonadales and HDB during reactor operation. Based on the phylogenetic analysis, the Fimbriimonadales sequences acquired from the reactor were clustered into three distinct groups, which included the sequences obtained from other anammox reactors. Metagenome-assembled genome analysis of Fimbriimonadales allowed the identification of the genes narGHI and nrfAH, responsible for dissimilatory nitrate reduction to ammonium (DNRA), and nrt and nasA, responsible for nitrate and nitrite transport. In a simulation based on mass balance equations and quantified bacterial groups, the total nitrogen concentrations in the effluent were best predicted when Fimbriimonadales was assumed to perform DNRA (R2 = 0.70 and RMSE = 18.9). Moreover, mass balance analysis demonstrated the potential contribution of DNRA in enriching anammox bacteria and promoting nitrogen removal. These results prove that Fimbriimonadales compete with HDB for nitrate utilization through DNRA in the anammox reactor under non-exogenous carbon supply conditions. Overall, our findings suggest that the DNRA pathway in Fimbriimonadales could enhance anammox enrichment and nitrogen removal by providing substrates (nitrite and/or ammonium) for anammox bacteria.

A temperature-resilient anammox process for efficient treatment of rare earth element tailings wastewater via synergistic nitrite supply of partial nitritation and partial denitrification

Rare earth elements result in substantial tailings wastewater with high ammonium and nitrate during extraction. In this study, a temperature-resilient Anammox process was employed for efficient treatment of rare earth element tailings wastewater through implementing synergistic nitrite supply by partial nitritation (PN) and partial denitrification (PD). Enhancing temperature resilience of Anammox process relies on dynamic management of DO and COD inputs to shift the dominant nitrite supplier from PN to PD, stable PD (NAR ≥ 90 %) can boost nitrogen removal by Anammox to 97.8 %. The nitrogen removal rate and nitrogen removal efficiency at 10.6 °C could maintain at 0.12 kgN/m3·d-1 and 92.5 %, respectively. Microbial analysis reveals that Nitrosomonas, Thauera, and Candidatus_Kuenenia are the predominant genera responsible for nitrite supply and nitrogen removal, localized within the gas channels of granules, flocs, and micro-granules, respectively. Keeping the influent C/NO3--N ratio below 1.7 is ideal to prevent overgrowth of Thauera and maintain system stability.

Achieving Long-Term Stability of Partial Nitrification and Autotrophic Denitrification in an MABR via Sulfide Dosing

While partial nitrification (PN) has the potential to reduce energy for aeration, it has proven to be unstable when treating low-strength wastewater. This study introduces an innovative combined strategy incorporating a low rate of oxygen supply, pH control, and sulfide addition to selectively inhibit nitrite-oxidizing bacteria (NOB). This strategy led to a stable PN in a laboratory-scale membrane aerated biofilm reactor (MABR). Over a period of 260 days, the nitrite accumulation ratio exceeded 60% when treating synthetic sewage containing 50 mg NH4+-N/L. Through in situ activity testing and high-throughput sequencing, the combined strategy led to low levels of nitrite-oxidation activity (<5.5 mg N/m2 h), Nitrospira species (relative abundance <1%), and transcription of nitrite-oxidation genes (undetectable). The addition of sulfide led to simultaneous PN and autotrophic denitrification in the single-stage MABR, resulting in over 60% total inorganic nitrogen removal. Sulfur-based autotrophic denitrification consumed nitrite and inhibited NOB conversion of nitrite to nitrate. The combined strategy has potential to be applied in large-scale sewage treatment and deserves further exploration.

Potential electron acceptors for ammonium oxidation in wastewater treatment system under anoxic condition: A review

Anaerobic ammonium oxidation has been considered as an environmental-friendly and energy-efficient biological nitrogen removal (BNR) technology. Recently, new reaction pathway for ammonium oxidation under anaerobic condition had been discovered. In addition to nitrite, iron trivalent, sulfate, manganese and electrons from electrode might be potential electron acceptors for ammonium oxidation, which can be coupled to traditional BNR process for wastewater treatment. In this paper, the pathway and mechanism for ammonium oxidation with various electron acceptors under anaerobic condition is studied comprehensively, and the research progress of potentially functional microbes is summarized. The potential application of various electron acceptors for ammonium oxidation in wastewater is addressed, and the N2O emission during nitrogen removal is also discussed, which was important greenhouse gas for global climate change. The problems remained unclear for ammonium oxidation by multi-electron acceptors and potential interactions are also discussed in this review.

Insights into current bio-processes and future perspectives of carbon-neutral treatment of industrial organic wastewater: A critical review

With the rise of the concept of carbon neutrality, the current wastewater treatment process of industrial organic wastewater is moving towards the goal of energy conservation and carbon emission reduction. The advantages of anaerobic digestion (AD) processes in industrial organic wastewater treatment for bio-energy recovery, which is in line with the concept of carbon neutrality. This study summarized the significance and advantages of the state-of-the-art AD processes were reviewed in detail. The application of expanded granular sludge bed (EGSB) reactors and anaerobic membrane bioreactor (AnMBR) were particularly introduced for the effective treatment of industrial organic wastewater treatment due to its remarkable prospect of engineering application for the high-strength wastewater. This study also looks forward to the optimization of the AD processes through the enhancement strategies of micro-aeration pretreatment, acidic-alkaline pretreatment, co-digestion, and biochar addition to improve the stability of the AD system and energy recovery from of industrial organic wastewater. The integration of anaerobic ammonia oxidation (Anammox) with the AD processes for the post-treatment of nitrogenous pollutants for the industrial organic wastewater is also introduced as a feasible carbon-neutral process. The combination of AnMBR and Anammox is highly recommended as a promising carbon-neutral process for the removal of both organic and inorganic pollutants from the industrial organic wastewater for future perspective. It is also suggested that the AD processes combined with biological hydrogen production, microalgae culture, bioelectrochemical technology and other bio-processes are suitable for the low-carbon treatment of industrial organic wastewater with the concept of carbon neutrality in future.

Efficient reactivation of anammox sludge after prolonged storage using a combination of batch and continuous reactors

Due to the slow growth rate of anammox bacteria, enriched sludge is required for the rapid start-up of anammox-based reactors. However, it is still unclear if long-term stored anammox sludge (SAS) is an effective source of inoculum to accelerate reactor start-up. This study explored the reactivation of long-term SAS and developed an efficient protocol to reduce the start-up period of an anammox reactor. Although stored for 13 months, a low level of the specific anammox activity of 28 mg N/g VSS/d was still detected. Experimental Phase 1 involved the direct application of SAS to an upflow sludge bed reactor (USB) operated for 90 d under varying conditions of hydraulic retention time and nitrogen concentrations. In Phase 2, batch runs were executed prior to the continuous operation of the USB reactor. The biomass reactivation in the continuous flow reactor was unsuccessful. However, the SAS was effectively reactivated through a combination of batch runs and continuous flow feed. Within 75 days, the anammox process achieved a stable rate of nitrogen removal of 1.3 g N/L/day and a high nitrogen removal efficiency of 84.1 ± 0.2%. Anammox bacteria (Ca. Brocadia) abundance was 37.8% after reactivation. These overall results indicate that SAS is a feasible seed sludge for faster start-up of high-rate mainstream anammox reactors.

Metabolic insights into the interaction between nitrogen removal and 4-chlorophenol reduction of anammox consortia

The response characteristic and performance stabilization of anammox process under the stress of the potential organic pollutants support the application of ammonia-nitrogen wastewater treatment. In the present study, nitrogen removal performance was significantly suppressed with the addition of 4-chlorophenol. The activity of anammox process was inhibited by 14.23% (0.1 mg/L), 20.54% (1 mg/L) and 78.15% (10 mg/L), respectively. Metagenomic analysis revealed a significant decrease in the abundance of KEGG pathways associated with carbohydrate and amino acid metabolism with increasing 4-chlorophenol concentration. Metabolic pathway profiles suggest that putrescine is down-regulated at high 4-chlorophenol stress due to inhibition of nitrogen metabolism processes, while it is up-regulated to reduce oxidative damage. In addition, the presence of 4-chlorophenol induced an enhancement of EPS and bacterial debris decomposition, and a partial conversion of 4-chlorophenol to p-nitrophenol. This study unravels the mechanism of effect on anammox consortia in response to 4-CP, which could provide supplementary to facilitate its full-scale application.

Optimizing nitrogenous organic wastewater treatment through integration of organic capture, anaerobic digestion, and anammox technologies: sustainability and challenges

With China's recent commitment to reducing carbon emissions and achieving carbon neutrality, anaerobic digestion and anaerobic ammonium oxidation (anammox) have emerged as promising technologies for treating nitrogenous organic wastewater. Anaerobic digestion can convert organic matter into volatile fatty acids (VFAs), methane, and other chemicals, while anammox can efficiently remove nitrogen with minimal energy consumption. This study evaluates the principles and characteristics of enhanced chemical flocculation and bioflocculation, as well as membrane separation, for capturing organic matter. Additionally, the paper evaluates the production of acids and methane from anaerobic digestion, exploring the influence of various factors and the need for control strategies. The features, challenges, and concerns of partial nitrification-anammox (PN/A) and partial denitrification-anammox (PD/A) are also outlined. Finally, an integrated system that combined organic capture, anaerobic digestion, and anammox is proposed as a sustainable and effective solution for treating nitrogenous organic wastewater and recovering energy and resources.

Degradation performance and potential protection mechanism of the anammox consortia in response to capecitabine

The potential risks of anti-cancer drugs such as capecitabine have attracted considerable attention due to their continuous release. Understanding the response of removal performance and protective mechanism to the presence of emerging contaminants is crucial for the application of anammox techniques in wastewater treatment. Capecitabine affected the nitrogen removal performance slightly in the activity experiment. Due to bio-adsorption and biodegradation, up to 64-70% of the capecitabine can be removed effectively. However, 10 mg/L of capecitabine significantly decreased the removal efficiency of capecitabine and total nitrogen at repeated load of capecitabine. Metabolomic analysis revealed the metabolites 5'-deoxy-5-fluorocytidine and alpha-fluoro-beta-alanine, while metagenomic analysis confirmed the biodegradation pathway and underlying gene distribution. The potentially protective mechanisms of the system against capecitabine were the increased heterotrophic bacteria and secretion of sialic acid. Blast analysis confirmed the presence of potential genes involved in the complete biosynthesis pathway of sialic acid in anammox bacteria, some of which are also found in Nitrosomonas, Thauera, and Candidatus Promineofilum.

Treatment of high-phosphorus load wastewater by column packed with non-burning compound filler/gravel/ceramsite: evaluation of performance and microorganism community

Cost-effective and environmental-friendly substrates are essential for the constructed wetlands (CWs). In this study, the column test was used to explore the differences in pollutant purification performance, microbial community structure and abundance between non-burning compound filler and conventional CWs substrates (i.e. gravel and ceramsite) at low temperature (0-15℃). It was found that the maximum phosphorus removal efficiency of compound filler (99%) was better than gravel (18%) and ceramsite (21%). Besides, the proportion of aerobic heterotrophic bacteria capable of ammonium oxidation, nitrification and denitrification (i.e. Pseudomonas, Acinetobacter, and Acetoanaerobium) was enhanced by compound filler, which has an excellent potential for nitrogen removal in the subsequent purification process. These results demonstrated that the self-made non-burning compound filler was a potential substrate for CWs, which was of great significance for the resource utilization of solid wastes such as polyaluminum chloride residue.

Achieving robust and highly efficient nitrogen removal in a mainstream anammox reactor by introducing low concentrations of readily biodegradable organics

In this study, an anammox reactor was operated to treat low-strength (NH₄⁺ + NO₂^-, 25-35  mg/L) wastewater without (phase I) or with (phase II) readily biodegradable chemical oxygen demand (rbCOD). In phase I, although efficient nitrogen removal was achieved at the beginning, nitrate accumulated in the effluent after long-term operation (75  days), resulting in a decrease in the nitrogen removal efficiency to 30%. Microbial analysis revealed that the abundance of anammox bacteria decreased from 2.15 to 1.78%, whereas that of nitrite-oxidizing bacteria (NOB) increased from 0.14 to 0.56%. In phase II, rbCOD, in terms of acetate, was introduced into the reactor with a carbon/nitrogen ratio of 0.9. The nitrate concentration in the effluent decreased within 2 days. Advanced nitrogen removal was achieved in the following operation, with an average effluent total nitrogen of 3.4 mg/L. Despite the introduction of rbCOD, anammox pathway still dominated to the nitrogen loss. High-throughput sequencing indicated that high anammox abundance (2.48%) further supports its dominant position. The improvement in nitrogen removal was attributed to the enhanced suppression of NOB activity, simultaneous nitrate polishing through partial denitrification and anammox, and promotion of sludge granulation. Overall, the introduction of low concentrations of rbCOD is a feasible strategy for achieving robust and efficient nitrogen removal in mainstream anammox reactors.

Response of simultaneous sulfide and nitrate removal process on acute toxicity of substrate concentration and salinity: Single toxicity and combined toxicity

Simultaneous sulfide and nitrate removal process has performed excellent to treat nitrogen and sulfur pollutants in wastewater treatment. A high salinity stress poses a great challenge to the treatment of highly saline wastewater containing nitrate and sulfide. In addition, sulfide and nitrates are also toxic for the process, and their high concentration would inhibit the process. Therefore, the current work explores the single acute toxic effect and combined toxic effect of salinity and substrate concentration on the performance of the process from the perspective of toxicology. Considering sulfide and nitrate removal performance as an indicator, the IC₅₀ values of sulfide were 293.20 mg S/L and 572.30 mg S/L, respectively; while those of salinity were 6.14% wt (91.78 mS/cm) and 6.63% wt (98.73 mS/cm), respectively. High substrate concentration or salinity resulted in elemental sulfur generation. The molar ratio of generated elemental sulfur to consumed sulfide(R-Sulfate) was close to 1. The response of nitrate reduction product to the elevating substrate concentration was not obvious, while its response to increasing salinity was on the contrary. With the increasing salinity (1.2% wt to 9.6% wt), molar ratio of generated nitrogen gas to consumed nitrate (R-Nitrogen gas) increased from 0.58 to 1, while molar ratio of generated nitrite to consumed nitrate (R-Nitrite) decreased from 0.43 to 0. Factorial analysis test revealed that the combined acute toxicity of substrate and salinity on sulfide oxidization and nitrate reduction were both antagonistic effects.

Multidisciplinary characterization of nitrogen-removal granular sludge: A review of advances and technologies

Nitrogen-removal granular sludge (NRGS) is a promising technology in wastewater treatment, with advantages of efficient nitrogen removal, less footprint, lower sludge production and energy consumption, and is a way for wastewater treatment plants to achieve carbon-neutrality. Aerobic granular sludge (AGS) and anammox granular sludge (AnGS) are two typical NRGS technologies that have attracted extensive attention. Mounting evidence has shown strong associations between NRGS properties and the status of NRGS systems; however, a holistic view is still missing. The aim of this article is to provide an overview of NRGS with an emphasis on characterization. Specifically, the integrated nitrogen transformation pathways inside NRGS and the performance of NRGS treating various wastewaters are discussed. NRGS properties are categorized as physical-, chemical-, biological- and systematical ones, presenting current advances and corresponding characterization technologies. Finally, the future prospects for furthering the mechanistic understanding and engineering application of NRGS are proposed. Overall, the technological advancements in characterization have greatly contributed to understanding NRGS properties, which are potential factors for optimizing the performance and evaluating the working status of NRGS. This review will provide guidance in characterizing NRGS properties and boost the introduction of novel characterization technologies.

Anammox sludge preservation: Preservative agents, temperature and substrate

The difficulties of enrichment and preservation of anaerobic ammonium oxidation bacteria (AnAOB) greatly limit their application in practice. Herein, traditional and emerging preservative agents (e.g., EPS + N2H4, betaine, glycerol and trehalose) were evaluated for their preservation of AnAOB-dominant sludge at different temperatures (e.g., 4 °C and room temperature). In addition, the effects of substrates on preservation were also considered. The results showed that adding betaine or glycerol at 4 °C was the optimal strategy for preserving anammox granular sludge. The relative anammox activities (rAA) increased by 145.26% and 158.30% at the recovery phase, respectively. Moreover, the absolute abundances of functional gene hzsA increased by 339% and 46%, respectively. Although the granular properties and microbial community structures changed during the preservation, the general performance of anammox granules could effectively restored. Collectively, this study provides the optimal strategies for anammox sludge preservation at low temperatures.