Review on microbial fuel cells applications, developments and costs

Low electrode potentials enhance current generation by Geobacter sulfurreducens biofilms: A high-throughput study

The microbial species Geobacter sulfurreducens uses different extracellular electron transfer (EET) pathways depending on the potential of the final electron acceptor, yet a complete understanding of EET mechanisms and the impact of thermodynamically limiting potentials remains elusive. Here, we employ a custom-designed high-throughput system that enables the simultaneous and continuous execution of 128 parallel experiments to investigate the complete spectrum of potentials ([-0.25 to 0] V vs. SHE) impacting the metabolic energy generation in axenic G. sulfurreducens electroactive biofilms (EABs). These were grown for 500 h in three consecutive stages and characterized electrochemically. The EABs grown on electrodes poised below the apparent midpoint potential ([-0.18 to -0.16] V) grew slower than those grown at conventional, non-limiting potential (0 V), developing 50% smaller biofilms and 2.4-fold higher anodic plateau currents on average ([0.1 vs. 0.04] mA cm-2). These also exhibited enhanced charge transport coupled to higher average concentrations of charge carriers ([1.6 vs. 0.4] mMe-), the latter impacting linearly the anodic plateau current. Low- and high-potential redox pools were discriminated with the former comprising 50%-70% of storable charge. Overall, these findings strongly suggest an overexpression of charge carriers in G. sulfurreducens EABs cultivated at lower potentials and highlight the useful contribution of high-throughput tools for boosting research in electromicrobiology.

Novel microbial fuel cell integrating anoxic/oxic-membrane bioreactor design for simultaneous energy recovery and carbon-nitrogen removal from shale oil and gas wastewater

Shale oil and gas wastewater (SOGW), rich in pollutants, poses an environmental threat. A novel microbial fuel cell (MFC) resembling an anoxic/oxic-membrane bioreactor (A/O-MBR), called AOMM, was developed to treat SOGW and recover energy. AOMM required no expensive ion-exchange membrane and incorporated a custom suspended-rotating biocathode, reducing the reliance on high-cost and hard-to-scale components. Furthermore, AOMM achieved a maximum power density of 61.6 mW/m2 and, under optimized operating conditions, removed 98.3% of chemical oxygen demand (COD), 99.6% of ammonium nitrogen (NH4+-N), and 82.2% of total nitrogen (TN) from simulated SOGW. Microbial and gene analyses revealed enrichment of key bacteria and functional genes associated with electron transfer, carbon degradation, and nitrogen removal in both the anode and cathode. Moreover, AOMM demonstrated greater organic removal with a simpler process than an actual SOGW treatment project. This study provides an alternative with high application potential for efficient treatment and resource recovery of SOGW.

WS2/WO3 modified carbon anode as efficient electrocatalysts for enhancing electricity generation and pollution removal

Microbial fuel cells (MFCs) have emerged as a new energy technology to solve severe energy and environmental issues. As a bridge connecting the internal and external circuits and a habitat for microorganisms, the anode is a key component influencing the performance output of MFCs. Recently, tungsten trioxide (WO3) and tungsten disulfide (WS2) can be used for the MFC setup. In this study, a direct hydrothermal synthesis method was employed to prepare WS2/WO3 nanomaterials. It was subsequently integrated with carbon paper (CP) to develop WS2/WO3-CP and WO3-CP anodes for MFCs. Contact angle tests showed that the hydrophilicity of the WS2/WO3-CP electrode was significantly improved. In electrochemical tests, the MFCs with WS2/WO3-CP anode exhibited lower charge transfer resistance and higher electron transfer efficiency than the original ones. The MFC with the WS2/WO3-CP anode had a maximum power density reaching 2.32 W·m-2, which was 1.34 and 3.09 times higher than that of the WO3-CP and bare CP anodes, respectively. Meanwhile, this MFC with the WS2/WO3-CP anode showed higher removal rates of chemical oxygen demand and SO4 2- than the WO3-CP and CP anodes. The modified WS2/WO3 nanomaterials are promising materials that can be adopted for MFCs industrial use.

Robust measurement of microbial reduction of graphene oxide nanoparticles using image analysis

Shewanella oneidensis (S. oneidensis) has the capacity to reduce electron acceptors within a medium and is thus used frequently in microbial fuel generation, pollutant breakdown, and nanoparticle fabrication. Microbial fuel setups, however, often require costly or labor-intensive components, thus making optimization of their performance onerous. For rapid optimization of setup conditions, a model reduction assay can be employed to allow simultaneous, large-scale experiments at lower cost and effort. Since S. oneidensis uses different extracellular electron transfer pathways depending on the electron acceptor, it is essential to use a reduction assay that mirrors the pathways employed in the microbial fuel system. For microbial fuel setups that use nanoparticles to stimulate electron transfer, reduction of graphene oxide provides a more accurate model than other commonly used assays as it is a bulk material that forms flocculates in solutions with a large ionic component. However, graphene oxide flocculates can interfere with traditional absorbance-based measurement techniques. This study introduces a novel image analysis method for quantifying graphene oxide reduction, showing improved performance and statistical accuracy over traditional methods. A comparative analysis shows that the image analysis method produces smaller errors between replicates and reveals more statistically significant differences between samples than traditional plate reader measurements under conditions causing graphene oxide flocculation. Image analysis can also detect reduction activity at earlier time points due to its use of larger solution volumes, enhancing color detection. These improvements in accuracy make image analysis a promising method for optimizing microbial fuel cells that use nanoparticles or bulk substrates.IMPORTANCEShewanella oneidensis (S. oneidensis) is widely used in reduction processes such as microbial fuel generation due to its capacity to reduce electron acceptors. Often, these setups are labor-intensive to operate and require days to produce results, so use of a model assay would reduce the time and expenses needed for optimization. Our research developed a novel digital analysis method for analysis of graphene oxide flocculates that may be utilized as a model assay for reduction platforms featuring nanoparticles. Use of this model reduction assay will enable rapid optimization and drive improvements in the microbial fuel generation sector.

Boosting the Performance of a Zero-gap Flow Microbial Fuel Cell by Immobilized Redox Mediators

Although microbial fuel cells (MFC) could be a promising energy source, their implementation is largely limited by low performance. There are several approaches to overcome this issue. For example, MFC performance can be enhanced using redox mediators (RM) capable of transferring electrons between microorganisms and MFC electrodes. The other, quite novel approach is to use zero-gap electrochemical cells, which minimize the distance between MFC electrodes and, therefore, its internal resistance. This work aims to investigate the compatibility of these approaches. First, a template electropolymerization of polypyrrole (PPy) on carbon felt was carried out in the presence of 2,7-anthraquinone disulfonate (AQDS) acting as an RM. These materials were then used as the anode of a zero-gap double chamber MFC inoculated with sediment from a natural water body and continuously fed with artificial wastewater. On the scales of 45 and 64 days, such cells exhibited power density of up to 900 mW m-2, while unmodified cells demonstrated values tens of times lower, indicating that RM appears to extensively incorporate weak electricigens from the inoculant in the MFC operation. PPy/AQDS electrodes retain electroactive properties during long-term tests, resulting in a theoretical turnover rate of AQDS molecules up to 590.

Enhanced pollution control using sediment microbial fuel cells for ecological remediation

Sediment Microbial Fuel Cell (SMFC) technology is an innovative approach to facilitate the degradation of sedimentary organic matter by electroactive microorganisms, transforming chemical energy into electrical energy and modulating the redox potential at the sediment-water interface, consequently controlling the release of endogenous pollutants. The synergistic effects of various environmental factors and intrinsic conditions can significantly impact SMFC performance. This review provides a comprehensive overview of SMFC development in research and application for water environment treatment and ecological remediation, a perspective rarely explored in previous reviews. It discusses optimization strategies for SMFC implementation, emphasizing advancements in novel or cost-effective electrode materials, the dynamics of microbial communities, and the control of typical pollutants. The review suggests a virtuous cycle path for SMFC development, highlighting future research needs, including integrating cross-disciplinary approaches like artificial intelligence, genomics, and mathematical modeling, to enhance the deployment of SMFC in real-world environmental remediation.

Inoculum selection and hydraulic retention time impacts in a microbial fuel cell treating saline wastewater

Microbial fuel cell (MFC) technology has received increased interest as a suitable approach for treating wastewater while producing electricity. However, there remains a lack of studies investigating the impact of inoculum type and hydraulic retention time (HRT) on the efficiency of MFCs in treating industrial saline wastewater. The effect of three different inocula (activated sludge from a fish-canning industry and two domestic wastewater treatment plants, WWTPs) on electrochemical and physicochemical parameters and the anodic microbiome of a two-chambered continuous-flow MFC was studied. For each inoculum, three different HRTs were tested (1 day, 3 days, and 6 days). The inoculum from the fish canning industry significantly increased voltage production (with a maximum value of 802 mV), power density (with a maximum value of 78 mW m-2), coulombic efficiency (with a maximum value of 19.3%), and organic removal rate (ORR) compared to the inocula from domestic WWTPs. This effect was linked to greater absolute and relative abundances of electroactive microorganisms (e.g., Geobacter, Desulfovibrio, and Rhodobacter) and predicted electron transfer genes in the anode microbiome likely due to better adaption to salinity conditions. The ORR and current production were also enhanced at shorter HRTs (1 day vs. 3 and 6 days) across all inocula. This effect was related to a greater abundance and diversity of bacterial communities at HRT of 1 day compared to longer HRTs. Our findings have important bioengineering implications and can help improve the performance of MFCs treating saline effluents such as those from the seafood industry. KEY POINTS: • Inoculum type and HRT impact organic matter removal and current production. • Changes in bioenergy generation were linked to the electroactive anodic microbiome. • Shorter HRT favored increases in the performance of the MFC.

Enhancing Performance of Microbial Fuel Cell by Binder-Free Modification of Anode with Reduced Graphene Oxide through One-Step Electrochemical Exfoliation and In Situ Electrodeposition

As the core component of microbial fuel cells, the conductivity and biocompatibility of anode are hard to achieve simultaneously but significantly influence the power generation performance and the overall cost of microbial fuel cells. Stainless steel felt has a low price and high conductivity, making it a potential anode for the large-scale application of microbial fuel cells. However, its poor biocompatibility limits its application. This study provides a one-step binder-free modification method of a stainless steel felt anode with reduced graphene oxide to retain the high conductivity while greatly improving biocompatibility. The maximum power density achieved by reduced graphene oxide modified stainless steel felt was 951.89 mW/m2, 5.49 and 1.91 times higher than the unmodified stainless steel felt anode and reduced graphene oxide coated stainless steel felt by Nafion, respectively. The robust reduced graphene oxide modification markedly improved the biocompatibility by forming a uniform biofilm and utilizing the high conductivity of reduced graphene oxide to enhance the charge transfer rate. It led to 92.7 and 37.9% decreases in charge transfer resistance of reduced graphene oxide modified stainless steel felt compared to the unmodified one and the anode modified with reduced graphene oxide by Nafion, respectively. The excellent performance and green synthesis method of the anode validated its potential as a high-performance anode material for scaled-up microbial fuel cell applications.

Effect of Gold Nanoparticles in Microbial Fuel Cells Based on Polypyrrole-Modified Saccharomyces cerevisiae

Microbial fuel cells (MFCs) are a candidate for green energy sources due to microbes' ability to generate charge in their metabolic processes. The main problem in MFCs is slow charge transfer between microorganisms and electrodes. Several methods to improve charge transfer have been used until now: modification of microorganisms by conductive polymers, use of lipophilic mediators, and conductive nanomaterials. We created an MFC with a graphite anode, covering it with 9,10-phenatrenequinone and polypyrrole-modified Saccharomyces cerevisiae with and without 10 nm sphere gold nanoparticles. The MFC was evaluated using cyclic voltammetry and power density measurements. The peak current from cyclic voltammetry measurements increased from 3.76 mA/cm2 to 5.01 mA/cm2 with bare and polypyrrole-modified yeast, respectively. The MFC with polypyrrole- and nanoparticle-modified yeast reached a maximum power density of 150 mW/m2 in PBS with 20 mM Fe(III) and 20 mM glucose, using a load of 10 kΩ. The same MFC with the same load in wastewater reached 179.2 mW/m2. These results suggest that this MFC configuration can be used to improve charge transfer.

Sustained energy generation from unusable waste steel through microbial assisted fuel cell systems

In the present study, a novel green energy generation process assisted with Microbial Fuel Cell (MFC) principle for generation of electricity from used or wasted steel is explored. Through a unique approach, unused and other steel waste are recast by simple re-melting with a flexible wide composition for generation of green energy. A microbial-assisted electron transfer derived from the degradation of the steel material is utilized for production of green energy in a microbial galvanic reactor system. A. ferrooxidans acts as biocatalysts, facilitating the oxidization of ferrous ion (Fe2+) to ferric ion (Fe3+). The reaction takes place on the biofilm matrix which results in oxidised reactive zones that endorses further degradation or dissolution of Fe anode. This consequently results in achieving the highest power density as high as 4.92 ± 0.03 mW/cm2 at a current density of 0.01 ± 9 mA/cm2. The total cost of the unusable steel anode and other accessories are roughly estimated to be 7.94 $/m2 and 178.54 $/m2 and the gain from unit power generation is estimated to be 3.79 $/W, assuming continuous operation of 4.92 ± 0.03 mW/cm2. The present study presents a potent methodology/strategy for the generation of sustainable bioenergy from low-cost, unusable steel materials, which cannot be anyway used as such in other battery systems, say iron air cells/batteries.

Hydrocarbonoclastic Biofilm-Based Microbial Fuel Cells: Exploiting Biofilms at Water-Oil Interface for Renewable Energy and Wastewater Remediation

Microbial fuel cells (MFCs) represent a promising technology for sustainable energy generation, which leverages the metabolic activities of microorganisms to convert organic substrates into electrical energy. In oil spill scenarios, hydrocarbonoclastic biofilms naturally form at the water-oil interface, creating a distinct environment for microbial activity. In this work, we engineered a novel MFC that harnesses these biofilms by strategically positioning the positive electrode at this critical junction, integrating the biofilm's natural properties into the MFC design. These biofilms, composed of specialized hydrocarbon-degrading bacteria, are vital in supporting electron transfer, significantly enhancing the system's power generation. Next-generation sequencing and scanning electron microscopy were used to characterize the microbial community, revealing a significant enrichment of hydrocarbonoclastic Gammaproteobacteria within the biofilm. Notably, key genera such as Paenalcaligenes, Providencia, and Pseudomonas were identified as dominant members, each contributing to the degradation of complex hydrocarbons and supporting the electrogenic activity of the MFCs. An electrochemical analysis demonstrated that the MFC achieved a stable power output of 51.5 μW under static conditions, with an internal resistance of about 1.05 kΩ. The system showed remarkable long-term stability, which maintained consistent performance over a 5-day testing period, with an average daily energy storage of approximately 216 mJ. Additionally, the MFC effectively recovered after deep discharge cycles, sustaining power output for up to 7.5 h before requiring a recovery period. Overall, the study indicates that MFCs based on hydrocarbonoclastic biofilms provide a dual-functionality system, combining renewable energy generation with environmental remediation, particularly in wastewater treatment. Despite lower power output compared to other hydrocarbon-degrading MFCs, the results highlight the potential of this technology for autonomous sensor networks and other low-power applications, which required sustainable energy sources. Moreover, the hydrocarbonoclastic biofilm-based MFC presented here offer significant potential as a biosensor for real-time monitoring of hydrocarbons and other contaminants in water. The biofilm's electrogenic properties enable the detection of organic compound degradation, positioning this system as ideal for environmental biosensing applications.

Application of natural zeolite adsorption in cooperation with photosynthesis for the post-treatment of microbial fuel cells

Microbial fuel cells (MFCs) are a promising technology that directly converts organic matter (OM) in wastewater into electricity while simultaneously degrading contaminants. However, MFCs are insufficient for the removal of nitrogenous compounds. Therefore, the post-treatment of MFCs is essential. This study was the first to use natural zeolite adsorption integrated with photosynthesis (ZP) for post-treating MFCs. In this system, no external energy was required; instead, natural light was used to promote the growth of photosynthetic microorganisms, thereby enhancing contaminants removal through the photosynthesis process. To assess the effectiveness of the method, comparisons were conducted under two conditions: dark (no photosynthesis) and light (with photosynthesis). In darkness, extending hydraulic retention time (HRT) enhanced COD and BOD removal by 19.8% and 28.9%, respectively. When exposed to natural light, improvements were even more notable, with COD and BOD removal reaching 32% and 40%, respectively. In both conditions, the method effectively removed NH4 +, achieving 60% efficiency in darkness and 84.5% in light. This study showed that the adsorption capacity of the zeolite reached saturation when the cumulative liquid volume per unit weight of the zeolite exceeded 0.2 L g-1. The key functional photosynthetic microbes were investigated using 16S rRNA and 18S rRNA. This revealed the presence of microorganisms such as Chlorobium, Acidovorax, Novosphingobium, and Scenedesmus, which likely play a role in enhancing the efficiency of photosynthesis in removing contaminants. The study findings indicated that the integration of MFCs-ZP represents an eco-friendly approach capable of resource recovery from wastewater while also meeting discharge standards.

Batch and semi-continuous treatment of cassava wastewater using microbial fuel cells and metataxonomic analysis

The treatment of agroindustrial wastewater using microbial fuel cells (MFCs) is a technological strategy to harness its chemical energy while simultaneously purifying the water. This manuscript investigates the organic load effect as chemical oxygen demand (COD) on the production of electricity during the treatment of cassava wastewater by means of a dual-chamber microbial fuel cell in batch mode. Additionally, specific conditions were selected to evaluate the semi-continuous operational mode. The dynamics of microbial communities on the graphite anode were also investigated. The maximum power density delivered by the batch MFC (656.4 μW m- 2 ) was achieved at the highest evaluated organic load (6.8 g COD L- 1 ). Similarly, the largest COD removal efficiency (61.9%) was reached at the lowest organic load (1.17 g COD L- 1 ). Cyanide degradation percentages (50-70%) were achieved across treatments. The semi-continuous operation of the MFC for 2 months revealed that the voltage across the cell is dependent on the supply or suspension of the organic load feed. The electrode polarization resistance was observed to decreases over time, possibly due to the enrichment of the anode with electrogenic microbial communities. A metataxonomic analysis revealed a significant increase in bacteria from the phylum Firmicutes, primarily of the genus Enterococcus.

Sustainable hydrogen production via microalgae: Technological advancements, economic indicators, environmental aspects, challenges, and policy implications

Hydrogen has emerged as an alternative energy source to meet the increasing global energy demand, depleting fossil fuels and environmental issues resulting from fossil fuel consumption. Microalgae-based biomass is gaining attention as a potential source of hydrogen production due to its green energy carrier properties, high energy content, and carbon-free combustion. This review examines the hydrogen production process from microalgae, including the microalgae cultivation technological process for biomass production, and the three main routes of biomass-to-hydrogen production: thermochemical conversion, photo biological conversion, and electrochemical conversion. The current progress of technological options in the three main routes is presented, with the various strains of microalgae and operating conditions of the processes. Furthermore, the economic and environmental perspectives of biomass-to-hydrogen from microalgae are evaluated, and critical operational parameters are used to assess the feasibility of scaling up biohydrogen production for commercial industrial-scale applications. The key finding is the thermochemical conversion process is the most feasible process for biohydrogen production, compared to the pyrolysis process. In the photobiological and electrochemical process, pure hydrogen can be achieved, but further process development is required to enhance the production yield. In addition, the high production cost is the main challenge in biohydrogen production. The cost of biohydrogen production for direct bio photolysis it cost around $7.24 kg-1; for indirect bio photolysis it costs around $7.54 kg-1 and for fermentation, it costs around $7.61 kg-1. Therefore, comprehensive studies and efforts are required to make biohydrogen production from microalgae applications more economical in the future.

Improving bioelectrochemical performance by sulfur-doped titanium dioxide cooperated with Zirconium based metal-organic framework (S-TiO2@MOF-808) as cathode in microbial fuel cells

The sulfur-doped titanium dioxide (S-TiO2) cooperated with Zirconium based on a kind of metal-organic framework (MOF-808) was successfully prepared as cathode catalyst (S-TiO2@MOF-808) of microbial fuel cell (MFC) by two-step hydrothermal reaction. The particle size was approximately 5 μm, and the spherical S-TiO2 particle was attached to the surface of MOF-808 as irregular block solid. Zr-O, C-O and O-H bond were indicated to exist in S-TiO2@MOF-808. When n (Zr4+): n(Ti4+) was 1: 5, S-TiO2@MOF-808 showed better oxygen reduction reaction (ORR). The introduction of S-TiO2 restrained the framework collapse of MOF-808, S-TiO2@MOF-808 showed much higher catalytic stability in reaction. The recombination of sulfur and TiO2 reduced the charge transfer resistance, accelerated the electron transfer rate, and improved ORR greatly. The maximum power density of S-TiO2@MOF-808-MFC was 84.05 mW/m2, about 2.17 times of S-TiO2-MFC (38.64 mW/m2). The maximum voltage of S-TiO2@MOF-808-MFC was 205 mV, and the stability was maintained for 6 d.

Energy harvesting from plants using hybrid microbial fuel cells; potential applications and future exploitation

Microbial Fuel Cells (MFC) can be fuelled using biomass derived from dead plant material and can operate on plant produced chemicals such as sugars, carbohydrates, polysaccharides and cellulose, as well as being "fed" on a regular diet of primary biomass from plants or algae. An even closer relationship can exist if algae (e.g., prokaryotic microalgae or eukaryotic and unicellular algae) can colonise the open to air cathode chambers of MFCs driving photosynthesis, producing a high redox gradient due to the oxygenic phase of collective algal cells. The hybrid system is symbiotic; the conditions within the cathodic chamber favour the growth of microalgae whilst the increased redox and production of oxygen by the algae, favour a more powerful cathode giving a higher maximum voltage and power to the photo-microbial fuel cell, which can ultimately be harvested for a range of end-user applications. MFCs can utilise a wide range of plant derived materials including detritus, plant composts, rhizodeposits, root exudates, dead or dying macro- or microalgae, via Soil-based Microbial Fuel Cells, Sediment Microbial Fuel Cells, Plant-based microbial fuel cells, floating artificial islands and constructed artificial wetlands. This review provides a perspective on this aspect of the technology as yet another attribute of the benevolent Bioelectrochemical Systems.

The influence of various chemical oxygen demands on microbial fuel cells performance using leachate as a substrate

Microbial fuel cells (MFCs), hailed as a promising technology, hold the potential to combat various wastewater pollutants while simultaneously converting their chemical energy into electricity through biocatalysts. This study explores the applicability of a dual compartment MFC (DC-MFC) under varying conditions, targeting the removal of chemical oxygen demand (COD) from landfill leachate and electricity generation. In this setup, anaerobic sludge from a wastewater treatment plant serves as the inoculum in the anode compartment of the MFC, with a Nafion117 membrane acting as the separator between MFC units. The cathode compartments are filled with distilled water and continually aerated for 24 h to enhance air supply. The study assesses the MFC's performance across different COD concentrations, focusing on COD removal, power generation, and Coulombic efficiency. The findings reveal that COD removal efficiency is notably enhanced at higher concentrations of organic matter. Specifically, at a COD concentration of 3325.0 mg L-1, the MFC exhibited the highest COD removal efficiency (89%) and maximum power density (339.41 mWm-2), accompanied by a Coulombic efficiency of 25.5%. However, as the initial substrate concentration increased to 3825 mg L-1, the efficiency decreased to 72%, with a Coulombic efficiency of 13.56% and a power density of 262.34 mWm-2. Optical density levels increased due to bacterial growth at ambient temperature and neutral pH, reflecting the dynamic microbial response within the system.

Recent Advances in the Development of Sustainable Composite Materials used as Membranes in Microbial Fuel Cells

MFC can have dual functions; they can generate electricity from industrial and domestic effluents while purifying wastewater. Most MFC designs comprise a membrane which physically separates the cathode and anode compartments while keeping them electrically connected, playing a significant role in its efficiency. Popular commercial membranes such as Nafion, Hyflon and Zifron have excellent ionic conductivity, but have several drawbacks, mainly their prohibitive cost and non-biodegradability, preventing the large-scale application of MFC. Fabrication of composite materials that can function better at a much lower cost while also being environment-friendly has been the endeavor of few researchers over the past years. The current review aims to apprise readers of the latest trends of the past decade in fabricating composite membranes (CM) for MFC. For emphasis on environmental-friendly CM, the review begins with biopolymers, moving on to the carbon-polymer, polymer-polymer, and metal-polymer CM. Lastly, critical analysis towards technology-oriented propositions and realistic future directives in terms of strengths, weakness, opportunities, challenges (SWOC analysis) of the application of CM in MFC have been discussed for their possible large-scale use. The focus of this review is the development of hybrid materials as membranes for fuel cells, while underscoring the need for environment-friendly composites and processes.

Treatment of phenolic wastewater by anaerobic fluidized bed microbial fuel cell using carbon brush as anode: microbial community analysis and m-cresol degradation mechanism

Anaerobic fluidized bed microbial fuel cell (AFB-MFC) is a technology that combines fluidized bed reactor and microbial fuel cell to treat organic wastewater and generate electricity. The performance and the mechanism of treating m-cresol wastewater in AFB-MFC using carbon brush as biofilm anode were studied. After 48 h of operation, the m-cresol removal efficiency of AFB-MFC, MAR-AFB (fluidized bed bioreactor with acclimated anaerobic sludge), MAR-FB (ordinary fluidized bed reactor with only macroporous adsorptive resin) and AST (traditional anaerobic sludge treatment) were 95.29 ± 0.67%, 85.78 ± 1.81%, 71.24 ± 1.86% and 70.41 ± 0.32% respectively. The maximum output voltage and the maximum power density of AFB-MFC using carbon brush as biofilm anode were 679.7 mV and 166.6 mW/m2 respectively. The results of high-throughput sequencing analysis indicated the relative abundance of dominant electroactive bacteria, such as Trichococcus, Geobacter, and Pseudomonas, on the anode carbon brushes was higher than that of AST, and also identified such superior m-cresol-degrading bacteria as Bdellovibrio, Thermomonas, Hydrogenophaga, etc. Based on the determination of m-cresol metabolites detected by Gas Chromatography-Mass Spectrometry (GC-MS), the possible biodegradation pathway of m-cresol under anaerobic and aerobic conditions in AFB-MFC was speculated. The results showed that m-cresol was decomposed into formic acid-acetic anhydride and 3-methylpropionic acid under the action of electrochemistry, which is a simple degradation pathway without peripheral metabolism in AFB-MFC.

Xerogel-Derived Manganese Oxide/N-Doped Carbon as a Non-Precious Metal-Based Oxygen Reduction Reaction Catalyst in Microbial Fuel Cells for Energy Conversion Applications

Current study provides a novel strategy to synthesize the nano-sized MnO nanoparticles from the quick, ascendable, sol-gel synthesis strategy. The MnO nanoparticles are supported on nitrogen-doped carbon derived from the cheap sustainable source. The resulting MnO/N-doped carbon catalysts developed in this study are systematically evaluated via several physicochemical and electrochemical characterizations. The physicochemical characterizations confirms that the crystalline MnO nanoparticles are successfully synthesized and are supported on N-doped carbons, ascertained from the X-ray diffraction and transmission electron microscopic studies. In addition, the developed MnO/N-doped carbon catalyst was also found to have adequate surface area and porosity, similar to the traditional Pt/C catalyst. Detailed investigations on the effect of the nitrogen precursor, heat treatment temperature, and N-doped carbon support on the ORR activity is established in 0.1 M of HClO4. It was found that the MnO/N-doped carbon catalysts showed enhanced ORR activity with a half-wave potential of 0.69 V vs. RHE, with nearly four electron transfers and excellent stability with just a loss of 10 mV after 20,000 potential cycles. When analyzed as an ORR catalyst in dual-chamber microbial fuel cells (DCMFC) with Nafion 117 membrane as the electrolyte, the MnO/N-doped carbon catalyst exhibited a volumetric power density of ~45 mW m2 and a 60% degradation of organic matter in 30 days of continuous operation.

Investigating the Sulfonated Chitosan/Polyvinylidene Fluoride-Based Proton Exchange Membrane with fSiO2 as Filler in Microbial Fuel Cells

Chitosan (CS), a promising potential biopolymer with exquisite biocompatibility, economic viability, hydrophilicity, and chemical modifications, has drawn interest as an alternative material for proton exchange membrane (PEM) fabrication. However, CS in its original form exhibited low proton conductivity and mechanical stability, restricting its usage in PEM development. In this work, chitosan was functionalized (sulfonic acid (-SO3H) groups)) to enhance proton conductivity. The sulfonated chitosan (sCS) was blended with polyvinylidene fluoride (PVDF) polymer, along with the incorporation of functionalized SiO2 (-OH groups), for fabricating chitosan-based composite proton exchange membranes to enhance microbial fuel cell (MFC) performances. The results show that adding functionalized inorganic fillers (fSiO2) into the membrane enhances the mechanical, thermal, and anti-biofouling behavior. From the results, the PVDF/sCS/fSiO2 composite membrane exhibited enhanced proton conductivity 1.0644 × 10-2 S cm-1 at room temperature and increased IEC and mechanical and chemical stability. Furthermore, this study presents a revolutionary way to generate environmentally friendly natural polymer-based membrane materials for developing PEM candidates for enhanced MFC performances in generating bioelectricity and wastewater treatment.

Graphene and biochar-based cathode catalysts for microbial fuel cell: Performance evaluation, economic comparison, environmental and future perspectives

Microbial fuel cells (MFCs) have been the prime focus of research in recent years because of their distinctive feature of concomitantly treating and producing electricity from wastewater. Nevertheless, the electrical performance of MFCs is hindered by a protracted oxygen reduction reaction (ORR), and often a catalyst is required to boost the cathodic reactions. Conventional transition metals-based catalysts are expensive and infeasible for field-scale usage. In this regard, carbon-based electrocatalysts like waste-derived biochar and graphene are used to enhance the commercialisation prospects of MFC technology. These carbon-catalysts possess unique properties like superior electrocatalytic activity, higher surface area, and high porosity conducive to ORR. Theoretically, graphene-based cathode catalysts yield superior results than a biochar-derived catalyst, though at a higher cost. In contrast, the synthesis of waste-extracted biochar is economical; however, its ability to catalyse ORR is debatable. Therefore, this review aims to make a side-by-side techno-economic assessment of biochar and graphene-based cathode catalyst used in MFC to predict the relative performance and typical cost of power recovery. Additionally, the life cycle analysis of the graphene and biochar-based materials has been briefly discussed to comprehend the associated environmental impacts and overall sustainability of these carbo-catalysts.

Biogas utilization without desulfurization pretreatment in a bioelectrochemical system

Utilizing biogas as a fuel for heating and power generation usually requires desulfurization pretreatment. In this study, the biogas utilization without desulfurization pretreatment in a bioelectrochemical system (BES) was explored. The results showed that the biogas-fueled BES was successfully started up within 36 d and the presence of hydrogen sulfide promoted both methane consumption and electricity generation. The optimal performance (i.e., a methane consumption of 0.523 ± 0.004 mmol/d, a peak voltage of 577 ± 1 mV, a coulomb production of 37.86 ± 0.43C/d, a coulombic efficiency of 9.37 ± 0.06 % and the maximum power density of 2.070 W/m³) was obtained under bicarbonate buffer solution and 40 °C conditions. The addition of 1 mg/L sulfide and 5 mg/L L-cysteine facilitated methane consumption and electricity generation. In the anode biofilm, the dominant bacteria were Sulfurivermis, unclassified_o__Ignavibacteriales and Lentimicrobium, while Methanobacterium, Methanosarcina and Methanothrix were the predominant archaea. Besides, the metagenomics profiles reveal that anaerobic methane oxidation and electricity generation were closely related to sulfur metabolism. These findings provide a novel approach for utilizing biogas without desulfurization pretreatment.

New Application of Polyoxometalate Salts as Cathode Materials in Single Chamber MFC Using Wastewater for Bioenergy Production

Microbial fuel cells (MFCs) are a promising technology that can be applied in a bifunctional process in which wastewater treatment is used for renewable electric power generation. In this study, novel transition metal-modified Keggin-type lacunar polyoxometalate salts (L-POMs) Cs5PMo11M(H2O)O39 (M = Fe, Co), were synthesized and characterized by X-ray diffraction, SEM, EDX, IR, TGA/DSC, and UV-Vis/DSR spectroscopies to be tested, for the first time, as a cathode component in wastewater-fed air chamber MFCs. Both materials were tested in the presence and absence of light to evaluate their photocatalytic behavior. The best performance in terms of electricity production was obtained for the MFC containing the Co-modified POM-based cathode, which showed a maximum power of 418.15 mW/m2 equivalent to 331 mW per cubic meter of treated wastewater, and a maximum COD removal percentage of 97% after 96 h of MFC operation. Co- and Fe-modified POMs had outstanding optical behavior with lower energy gap values, 1.71 and 2.68 eV, respectively. The newly developed materials can be considered as promising alternative cathode catalysts in a new generation of MFC devices integrating full carbon removal from wastewater and a fast reduction of oxygen.

A review of waste-to-hydrogen conversion technologies for solid oxide fuel cell (SOFC) applications: Aspect of gasification process and catalyst development

In the twenty-first century, there has been an increase in energy demand and waste production, due to the rising population of the world. One good approach for satisfying the energy demand and overcoming the waste management issues is to convert waste to energy. Additionally, using waste biomass as the feedstock of waste-to-energy (WtE) conversion methods makes them renewable and green and also helps the environmental challenges and reduces the emission of greenhouse gases (GHGs). Gasification is a thermochemical WtE route, which can produce hydrogen-rich gaseous biofuel called synthetic gas (syngas), from wastes. In this paper, different aspects of gasification process are reviewed with greater focus on catalyst usage. Syngas processing steps, which increase the quality and H₂ content of the syngas to form bio-hydrogen, are discussed. Solid oxide fuel cell (SOFC) technology is one of the most promising techniques of renewable energy production due to their environmental cleanness characteristics and high efficiencies. Thus, one of the best ways to exploit the energy content of the bio-hydrogen product of gasification is to employ it in a SOFC. Therefore, waste biomass gasification process can be integrated with SOFCs to build high efficiency systems for production of clean and renewable energy from waste, which are called integrated gasification fuel cell (IGFC) systems. These systems provide the opportunity of further upgrading of syngas inside the SOFC. In this paper, we are going to briefly discuss fuel cell technology (especially SOFCs) and review SOFC applications from the aspect of integration with gasification process (IGFC system). Finally, the impacts and issues of gasification process and SOFC technology are considered.

Recent Implementations of Hydrogel-Based Microbial Electrochemical Technologies (METs) in Sensing Applications

Hydrogel materials have been used extensively in microbial electrochemical technology (MET) and sensor development due to their high biocompatibility and low toxicity. With an increasing demand for sensors across different sectors, it is crucial to understand the current state within the sectors of hydrogel METs and sensors. Surprisingly, a systematic review examining the application of hydrogel-based METs to sensor technologies has not yet been conducted. This review aimed to identify the current research progress surrounding the incorporation of hydrogels within METs and sensors development, with a specific focus on microbial fuel cells (MFCs) and microbial electrolysis cells (MECs). The manufacturing process/cost, operational performance, analysis accuracy and stability of typical hydrogel materials in METs and sensors were summarised and analysed. The current challenges facing the technology as well as potential direction for future research were also discussed. This review will substantially promote the understanding of hydrogel materials used in METs and benefit the development of electrochemical biosensors using hydrogel-based METs.

A New Reactor Concept for Single-Chamber Microbial Fuel Cells and Possible Anti-Fouling Strategies for Long-Term Operation

Microbial fuel cells are a promising technology for future wastewater treatment, as it allows cleaning and power generation simultaneously. The bottleneck of microbial fuel cells is often its cathodes because they determine the power output. Gas diffusion electrodes might overcome this bottleneck due to their low production costs and high oxygen reduction rates. However, biofilm formation on the gas diffusion electrodes reduces their performance over time. In this work, a new reactor design of the microbial fuel cell using rotating gas diffusion electrodes is presented. The biofilm growth on the electrode during operation was observed and its effect on the performance of the microbial fuel cell was examined. In addition, different antifouling strategies were investigated over a period of 80 days. It was found that already after 7 days of operation a complete biofilm had grown on an untreated gas diffusion electrode. However, this does not seem to affect the performance of the cells in the beginning. Differences in the performance of the reactors with and without an antifouling strategy only become apparent from day 15 onwards. The use of UV radiation and antibacterial membranes leads to the best results with maximum power densities of approx. 200 mW m^-2 while the untreated microbial fuel cell only achieves a maximum power density of approx. 20 mW m^-2.

Wheat straw-based microbial electrochemical reactor for azo dye decolorization and simultaneous bioenergy generation

Microbial fuel cells have emerged as a technique that can effectively treat wastewater with simultaneous electricity generation. The present study explored the performance of microbial fuel cell for decolorizing and degradation of azo dyes including, remazol brilliant blue (RBB), mordant blue 9 (MB9), acid red1 (AR1), and orange G (OG), while, simultaneously generating electricity. Wheat straw and its hydrolysate was used as a potential substrate in MFC. The hydrolysate was prepared through the degradation of wheat straw by P. floridensis, P. brevispora and P. chrysosporium, while the yeast Pichia fermentans was used as biocatalyst. Dye decolorization was carried out in a fungus-yeast mediated single-chambered MFC batch mode, U-shaped reactor, and bottle reactor in continuous mode. The maximum power density recorded in U shaped continuous reactor was 34.99 mW m^-2 on 21st day of the experiment. The best response of dye decolorization was observed in the case of MB9 (96%) with P. floridensis in the continuous electrochemical reactor followed by RBB (90-95%), OG (76%), and AR1 (38%). The toxicity of the treated wastewater was assessed using phytotoxicity analysis.

Scale-up of the bioelectrochemical system: Strategic perspectives and normalization of performance indices

Electrochemists and ecological engineers find environmental bioelectrochemistry appealing; however, there is a big gap between expectations and actual progress in bioelectrochemical system (BES). Implementing such technology opens new opportunities for novel electrochemical reactions for resource recovery and effective wastewater treatment. Loopholes of BES exist in its scaling-up applications, and numerous attempts toward practical applications (200, 1000, and 1500 L) are key successive indicators toward its commercialization. This review emphasized the critical rethinking of standardization of performance indices i.e. current generation (A/m²), net energy recovery (kWh/kg·COD), product/resource yield (mM), and economic feasibility ($/kWh) to make fair comparison with the existing treatment system. Therefore, directional perspectives, including modularity, energy-cost balance, energy and resource recovery, have been proposed for the sustainable market of BES. The current state of the art and up-gradation in resource recovery and contaminant removal warrants a systematic rethinking of functional worth and niches of BES for practical applications.

A Review of Recent Advances in Microbial Fuel Cells: Preparation, Operation, and Application

The microbial fuel cell has been considered a promising alternative to traditional fossil energy. It has great potential in energy production, waste management, and biomass valorization. However, it has several technical issues, such as low power generation efficiency and operational stability. These issues limit the scale-up and commercialization of MFC systems. This review presents the latest progress in microbial community selection and genetic engineering techniques for enhancing microbial electricity production. The summary of substrate selection covers defined substrates and some inexpensive complex substrates, such as wastewater and lignocellulosic biomass materials. In addition, it also includes electrode modification, electron transfer mediator selection, and optimization of operating conditions. The applications of MFC systems introduced in this review involve wastewater treatment, production of value-added products, and biosensors. This review focuses on the crucial process of microbial fuel cells from preparation to application and provides an outlook for their future development.

ZrP2O7 as a Cathodic Material in Single-Chamber MFC for Bioenergy Production

The present work is the first investigation of the electrocatalytic performances of ZrP₂O₇ as a cathode in a single-chamber Microbial Fuel Cell (MFC) for the conversion of chemical energy from wastewater to bioelectricity. This catalyst was prepared by a coprecipitation method, then characterized by X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), ultraviolet-visible-near-infrared spectrophotometry (UV-Vis-NIR), and cyclic voltammetry analyses. The acid-basic characteristics of the surface were probed by using 2-butanol decomposition. The conversion of 2-butanol occurs essentially through the dehydrating reaction, indicating the predominantly acidic character of the solid. The electrochemical test shows that the studied cathode material is electroactive. In addition, the ZrP₂O₇ in the MFC configuration exhibited high performance in terms of bioelectricity generation, giving a maximum output power density of around 449 mW m^-2; moreover, it was active for wastewater treatment, reducing the chemical oxygen demand (COD) charge to 50% after three days of reaction.

Contribution of configurations, electrode and membrane materials, electron transfer mechanisms, and cost of components on the current and future development of microbial fuel cells

Microbial fuel cells (MFCs) are a technology that can be applied to both the wastewater treatment and bioenergy generation. This work discusses the contribution of improvements regarding the configurations, electrode materials, membrane materials, electron transfer mechanisms, and materials cost on the current and future development of MFCs. Analysis of the most recent scientific publications on the field denotes that dual-chamber MFCs configuration offers the greatest potential due to the excellent ability to be adapted to different operating environments. Carbon-based materials show the best performance, biocompatibility of carbon-brush anode favors the formation of the biofilm in a mixed consortium and in wastewater as a substrate resembles the conditions of real scenarios. Carbon-cloth cathode modified with nanotechnology favors the conductive properties of the electrode. Ceramic clay membranes emerge as an interesting low-cost membrane with a proton conductivity of 0.0817 S cm^-1, close to that obtained with the Nafion membrane. The use of nanotechnology in the electrodes also enhances electron transfer in MFCs. It increases the active sites at the anode and improves the interface with microorganisms. At the cathode, it favors its catalytic properties and the oxygen reduction reaction. These features together favor MFCs performance through energy production and substrate degradation with values above 2.0 W m^-2 and 90% respectively. All the recent advances in MFCs are gradually contributing to enable technological alternatives that, in addition to wastewater treatment, generate energy in a sustainable manner. It is important to continue the research efforts worldwide to make MFCs an available and affordable technology for industry and society.