Antibiotic ciprofloxacin removal from aqueous solutions by electrochemically activated persulfate process: Optimization, degradation pathways, and toxicology assessment

From wastewater to clean water: Recent advances on the removal of metronidazole, ciprofloxacin, and sulfamethoxazole antibiotics from water through adsorption and advanced oxidation processes (AOPs)

Antibiotics released into water sources pose significant risks to both human health and the environment. This comprehensive review meticulously examines the ecotoxicological impacts of three prevalent antibiotics-ciprofloxacin, metronidazole, and sulfamethoxazole-on the ecosystems. Within this framework, our primary focus revolves around the key remediation technologies: adsorption and advanced oxidation processes (AOPs). In this context, an array of adsorbents is explored, spanning diverse classes such as biomass-derived biosorbents, graphene-based adsorbents, MXene-based adsorbents, silica gels, carbon nanotubes, carbon-based adsorbents, metal-organic frameworks (MOFs), carbon nanofibers, biochar, metal oxides, and nanocomposites. On the flip side, the review meticulously examines the main AOPs widely employed in water treatment. This includes a thorough analysis of ozonation (O3), the photo-Fenton process, UV/hydrogen peroxide (UV/H2O2), TiO2 photocatalysis, ozone/UV (O3/UV), radiation-induced AOPs, and sonolysis. Furthermore, the review provides in-depth insights into equilibrium isotherm and kinetic models as well as prospects and challenges inherent in these cutting-edge processes. By doing so, this review aims to empower readers with a profound understanding, enabling them to determine research gaps and pioneer innovative treatment methodologies for water contaminated with antibiotics.

Synthesis of surficial-modified green biochar catalyst generated by biogas residue biochar and potential application for catalytic ozonation degradation of ciprofloxacin

This study synthesized novel, green, and easily recoverable surface-modified economical catalysts via hydrothermal treatment (HT) successfully, utilizing biogas residue biochar (BRB), a food waste product from anaerobic fermentation, pyrolyzed at 500 °C for 50 min. Using autoclaves, a total of six solutions were prepared, each having 1 g fine-grinded BRB, surficial modified by adding glycerol (GL) (10 or 20 mL) and SDI water (70 or 60 mL), and heated in an oven at 240 °C, 180 °C, and 120 °C for 24 h. Afterward, the catalysts showed the potential for degradation of widely used emerging pollutants like ciprofloxacin. Taking advantage of catalytic surface modification, the catalytic ozonation degradation was more effective than that of a single ozonation. However, under similar conditions, catalyst amount 0.20 g, ozone dose 15 mg L-1, and ciprofloxacin 80 mg L-1, the performance of the 10 mL GL-180 °C catalyst was excellent. It showed a 92.45%-94.41% optimum removal rate in the 8-10 min interval. After five continuous cycles, the 10 mL GL-180 °C catalyst exhibited excellent stability and reusability. XPS, FT-IR, BET, XRD, and SEM before and after the reaction confirmed the successful synthesis and degradation mechanism. A possible degradation pathway was unrevealed based on a liquid chromatography-mass spectrometer (LC-MS) and scavenger test, proving the significant roles of superoxide radicals (O2•-), hydroxyl radicals (•OH), and singlet oxygen (1O2). Further, Electron paramagnetic resonance (EPR) analysis confirmed the presence of active oxygen species. Subsequently, 10 mL GL-180 °C showed promising degradation for the actual water environment, such as groundwater (73.55%) and river water (64.74%). This work provides a valuable economic strategy to convert biogas residue biochar into a low-cost catalyst for organic pollutant decomposition.

Treatment and optimization of high-strength egg-wash wastewater effluent using electrocoagulation and electrooxidation methods

Egg-washing wastewater contains a high concentration of nutrition and organic matter since eggs are broken during the washing and cleaning processes. Moreover, the wastewater contains small amounts of detergents or sanitizing agents. These contaminants may pose environmental challenges when they are not properly managed or treated. The study scrutinizes the efficiency of electrocoagulation (EO) and electrooxidation (EO) approaches for egg-wash wastewater treatment. The response surface methodology was employed to optimize the operational parameters. The removal efficiencies of soluble chemical oxygen demand (sCOD 90%), ammonia (NH3-N 91%), nitrate (NO3--N 97%), nitrite (NO2--N 89.3%), total dissolved nitrogen (TDN 91%), and phosphate (90%) were measured under various treatment conditions. The optimum treatment conditions achieved in the combined EC + EO process were pH 6.0, current density 20 mA cm-2, and electrolysis time of 60 min, respectively. Degradation kinetics of the egg-wash pollutants showed a significant reduction in half-life (t1/2) with EO (after EC-Aluminum) at 15 min, 12 min, 17 min, and 15 min for sCOD, NO2--N. NO3--N, and TDN, respectively. Whereas the half-life of NH3-N (18 min) and phosphate (17 min) reduced significantly with the EO (after EC-iron). Al and Fe electrodes coupled with boron-doped diamond were found efficient for pollutant removal. Environmental implication. Egg-wash wastewater has a high protein content and contains nutrients that are essential for living organisms. While these compounds can be valuable for agricultural use by increasing soil phosphate concentration, they can also become an issue if the excess nutrients are not properly managed. The soil has a threshold limit for holding phosphate, and any excess amount may be transported through surface runoff or contaminate groundwater through leachate, potentially affecting aquatic ecosystems and water quality. This study explores the efficiency of electrocoagulation and electrooxidation methods in treating egg-wash wastewater. These methods aim to remove pollutants and reduce their environmental impact.

Removal of typical pollutant ciprofloxacin using iron-nitrogen co-doped modified corncob in the presence of hydrogen peroxide

Iron-nitrogen co-doped modified corncob (Fe-N-BC) was synthesized using a hydrothermal and calcination method. The material shows excellent oxidation performance and environmental friendliness. When the dosage of Fe-N-BC was 0.6 g L-1, the concentration of H2O2 was 12 mM and pH was 4, ciprofloxacin (CIP) was virtually totally eliminated in 240 min under Fe-N-BC/H2O2 conditions. The TOC removal efficiency was 54.6%, and the effects of various reaction parameters on the catalytic activity of Fe-N-BC were thoroughly assessed. Through electron paramagnetic resonance (EPR) analyses and free radical quenching experiments, it was established that the reactive oxygen species (˙OH, ˙O2-, 1O2) were crucial in the elimination of CIP. Furthermore, the degradation of CIP was accelerated by the synergistic interaction between the transition metal and PFRs. A thorough evaluation was conducted to assess the respective contributions of adsorption and catalytic oxidation in the system. The degradation mechanism of CIP was proposed under Fe-N-BC/H2O2 conditions. Meanwhile, the possible degradation intermediates and pathways were proposed, and the toxicity of the degradation products of CIP was also meticulously investigated in the study. These findings offered the elimination of CIP in water a theoretical foundation and technical support.