Heterogeneous catalytic degradation of phenolic substrates: catalysts activity

Enhanced Heterogeneous Peroxymonosulfate Activation by MOF-Derived Magnetic Carbonaceous Nanocomposite for Phenol Degradation

Degradation efficiency and catalyst stability are crucial issues in the control of organic compounds in wastewater by advanced oxidation processes (AOPs). However, it is difficult for catalysts used in AOPs to have both high catalytic activity and high stability. Combined with the excellent activity of cobalt/copper oxides and the good stability of carbon, highly dispersed cobalt-oxide and copper-oxide nanoparticles embedded in carbon-matrix composites (Co-Cu@C) were prepared for the catalytic activation of peroxymonosulfate (PMS). The catalysts exhibited a stable structure and excellent performance for complete phenol degradation (20 mg L^-1) within 5 min in the Cu-Co@C-5/PMS system, as well as low metal-ion-leaching rates and great reusability. Moreover, a quenching test and an EPR analysis revealed that ·OH, O₂·^-, and ¹O₂ were generated in the Co-Cu@C/PMS system for phenol degradation. The possible mechanism for the radical and non-radical pathways in the activation of the PMS by the Co-Cu@C was proposed. The present study provides a new strategy with which to construct heterostructures for environmentally friendly and efficient PMS-activation catalysts.

Catalytic wet peroxide oxidation of phenol through mesoporous silica-pillared clays supported iron and/or titanium incorporated catalysts

Catalytic performances of Silica Pillared Clay (SPC) supports synthesized in different silica amounts both from standard SWy-2 clay mineral and Hançılı region bentonite rock (HWB), and iron (Fe) and/or titanium (Ti) incorporated SPCs in different combinations were evaluated in various advanced Catalytic Wet Peroxide Oxidation (CWPO) of phenol. Host clay mineral type led to different oxidation performances and metal loading created significant increases in the catalytic performance. CWPO performance of Fe-loaded SPCs was better than Ti-loaded ones, so oxidation parameters for Fe-SPCs were studied in detail. Catalyst amount and rise in temperature increased phenol conversion values significantly, and catalysts were more effective in lower pH reaction medium. Aromatic intermediates such as catechol, hydroquinone and benzoquinone formed at the beginning of oxidation were oxidized to carboxylic acids with an advancing oxidation time. The presence of carboxylic acids such as oxalic and formic acid resulted in relatively low total organic carbon (TOC) conversion values. The highest catalytic activity was obtained with high silica content Fe-SPCs synthesized with both host clays. Complete conversion was nearly achieved within 60 min with an experimental condition of T = 30 °C, pH = 3.7 and catalyst/solution ratio = 2 g/L for SWy-2 based catalyst by applying either CWPO or PCWPO (Photo Catalytic Wet Peroxide Oxidation) techniques. SCWPO (Sono Catalytic Wet Peroxide Oxidation) technique also yielded this value at the same oxidation conditions for HWB based catalyst. TOC conversion values at 240 min oxidation time were determined as 33% and 48% for SWy-2 based catalyst with CWPO and PCWPO techniques, respectively, and 37% for HWB based catalyst with SCWPO technique. SWy-2 based catalyst still retained its performance after 3 cycles.

Leaching Stability and Redox Activity of Copper-MFI Zeolites Prepared by Solid-State Transformations: Comparison with Ion-Exchanged and Impregnated Samples

The catalyst preparation route is well known to affect the copper loading and its electronic state, which influence the properties of the resulting catalyst. Electronic states of copper ions in copper-containing silicalites with the MFI-framework topology obtained by a solid-state transformation S (SST) were studied with using EPR, UV-Vis DR, XRD, H₂-TPR and chemical differentiating dissolution. They were compared with Cu-ZSM-5 and Cu-MFI (silicalite) prepared via the ion-exchange and incipient wetness impregnation. SST route was shown to provide the formation of MFI structure and favor clustering of Cu-ions near surface and subsurface of zeolite crystals. The square-planar oxide clusters of Cu²⁺-ions and the finely dispersed CuO nanoparticles with the size down to 20 nm were revealed in Cu-MFI-SST samples with low (0.5-1.0 wt.%) and high (16 wt.%) Cu-content. The CuO nanoparticles were characterized by energy band gap 1-1.16 eV. The CuO-like clusters were characterized by ligand-to-metal charge transfer band (CTB L → M) at 32,000 cm^-1 and contain EPR-visible surface Cu²⁺-ions. The low Cu-loaded SST-samples had poor redox properties and activity towards different solvents due to decoration of copper-species by silica; whereas CuO nanoparticles were easily removed from the catalyst by HCl. In the ion-exchanged samples over MFI-silicalite and ZSM-5, Cu²⁺-ions were mainly CuO-like clusters and isolated Cu²⁺ ions inside MFI channels. Their redox properties and tendency to dissolve in acidic solutions differed from the behavior of SST-series samples.

Heterogeneous Catalytic Ozonation: Solution pH and Initial Concentration of Pollutants as Two Important Factors for the Removal of Micropollutants from Water

There are several publications on heterogeneous catalytic ozonation; however, their conclusions and the comparisons between them are not always consistent due to the variety of applied experimental conditions and the different solid materials used as catalysts. This review attempts to limit the major influencing factors in order to reach more vigorous conclusions. Particularly, it highlights two specific factors/parameters as the most important for the evaluation and comparison of heterogeneous catalytic ozonation processes, i.e., (1) the pH value of the solution and (2) the initial concentration of the (micro-)pollutants. Based on these, the role of Point of Zero Charge (PZC), which concerns the respective solid materials/catalysts in the decomposition of ozone towards the production of oxidative radicals, is highlighted. The discussed observations indicate that for the pH range 6–8 and when the initial organic pollutants’ concentrations are around 1 mg/L (or even lower, i.e., micropollutant), then heterogeneous catalytic ozonation follows a radical mechanism, whereas the applied solid materials show their highest catalytic activity under their neutral charge. Furthermore, carbons are considered as a rather controversial group of catalysts for this process due to their possible instability under intense ozone oxidizing conditions.

Catalytic ozonation of aqueous 4-methylquinoline by fluorinated ceramic honeycomb

Metal-free catalysts for catalytic ozonation have attracted more and more attentions to eliminate the risk of secondary pollution of heavy metals in water or wastewater treatment. Herein we prepared fluorinated ceramic honeycomb (FCH) with the dip-calcination method using NH₄F as the modifier over ceramic honeycomb (CH) to catalyze the ozonation of 4-methylquinoline (4-Meq), a typical harmful quinoline derivate discharged from coal or petroleum industries. The ozonation degraded 54.9% of 4-Meq and removed 14.4% of chemical oxygen demand (COD) in 30 min, while the FCH catalytic ozonation degraded 77.8% of 4-Meq and removed 29.2% of COD. In addition, FCH has a stable catalytic performance and can effectively remove 4-Meq as well as COD in real coal gasification wastewater. The fluorination endows the surface of the FCH with abundant Si-F groups as active acid sites and aluminum-attached hydroxyl groups, and then enhance the ozone decomposition to generate free reactive oxygen species (ROS). Those ROS includes free hydroxyl radicals, free superoxide radicals as well as singlet oxygen, and the free hydroxyl radical plays a major role in the degradation and COD removal of 4-Meq. The degradation of 4-Meq follows two pathways of the demethylation, benzene ring opening and the pyridine ring-opening. This work demonstrates an efficient catalyst for ozonation to root out the risk of the heavy metals pollution from catalysts, and provides an insightful understanding of the FCH catalytic ozonation.

Complete mineralization of phenolic compounds in visible-light-driven photocatalytic ozonation with single-crystal WO3 nanosheets: Performance and mechanism investigation

Complete mineralization of phenolic compounds into CO₂ and H₂O is desirable for removing them in wastewater, but it is challenging due to the generated recalcitrant intermediates, which requires highly effective advanced oxidation process with proper catalysts. Herein, we found that single-crystal WO₃ nanosheets (NSs)-based photocatalytic ozonation (PCO) can realize complete mineralization of phenols (phenol and 2-chlorophenol) under visible light irradiation. Almost 100% mineralization ratio of phenols was achieved through WO₃ NSs-based PCO system within short time. By comparing their performances with those of polycrystalline WO₃ nanoparticles, detecting and analyzing the intermediates, identifying the dominant radicals and conducting some electrochemical characterizations, the origin of superior catalytic activity of WO₃ NSs was uncovered, the mineralization pathways and the overall mechanism were proposed. The excellent PCO performance of WO₃ NSs was contributed to their nanosheet morphology with single-crystal microstructure and good dispersion, which can provide continuous interior channels for the photogenerated charge transport from the bulk to surface of WO₃ NSs and enough active sites for the surface reactions triggered by these charges. This work puts forwards new ideas to design highly active photocatalysts for PCO and helps deepen understanding of the catalytic mechanism of PCO.

Recent progress of noble metals with tailored features in catalytic oxidation for organic pollutants degradation

With the increasing serious water pollutions, an increasing interest has given for the nanocomposites as environmental catalysts. To date, noble metals-based nanocomposites have been extensively studied by researchers in environmental catalysis. In detail, serving as key functional parts, noble metals are usually combined with other nanomaterials for rationally designing nanocomposites, which exhibit enhanced catalytic properties in pollutants removal. Noble metals in the nanocomposites possess tailored properties, thus playing different important roles in catalytic oxidation reactions for pollutants removal. To motivate the research and elaborate the progress of noble metals, this review (i) summarizes advanced characterization techniques and rising technology of theoretical calculation for evaluating noble metal, and (ii) classifies the roles according to their disparate mechanism in different catalytic oxidation reactions. Meanwhile, the enhanced mechanism and influence factors are discussed. (iii) The conclusions, facing challenges and perspectives are proposed for further development of noble metals-based nanocomposites as environmental catalysts.

Degradation performance and mechanism toward methyl orange via nanoporous copper powders fabricated by dealloying of ZrCuNiAl metallic glassy precursors

The catalyst of nanoporous Cu (NP-Cu) powders, with the chemical composition of Cu_79.63Ni_6.85O_13.53(at%), was successfully fabricated by dealloying of Zr-Cu-Ni-Al metallic glassy precursors. The as-prepared NP-Cu powders, co-existing with Cu₂O phase on Cu ligament surface, had a three-dimensional network porous structure. The NP-Cu powders/H₂O₂system showed superior catalytic degradation efficiency toward azo dyes in both acidic (pH 2) and neutral (pH 7) environments. Moreover, the cyclic tests indicated that this powder catalyst also exhibited good durability. A novel degradation mechanism of NP-Cu powders/H₂O₂was proposed: the high degradation performance in acidic environment was mainly derived from heterogeneous reaction involved with a specific pathway related to Cu³⁺to produce HO·, while in neutral environment it was primarily resulted from homogeneous reaction with the generation of HO· from the classical Cu-based Fenton-like process. This work indicates that the NP-Cu powders have great potential applications as catalysts for wastewater treatments.

Eco-friendly synthesis of nanostructured mesoporous materials from natural source rice husk silica for environmental applications

Nanostructured mesoporous materials of MCM-41 type were synthesized using a natural, non-toxic, and cheap source of silica from rice husk. Then, this pure silica was modified with several Fe loadings by a wet impregnation method. The chemical and physic properties of MCM-41 solids obtained were similar to those of MCM-41 synthesized from commercial silica by conventional method. Thus, all catalysts exhibited good structural regularity preserving the mesoporosity after the metal incorporation. The performance of the Fe/MCM-RHA composites as photo-Fenton heterogeneous catalysts was evaluated for photocatalytic degradation of different endocrine-disrupting chemicals (EDCs), such as herbicides (atrazine), and compounds derived from the plastic industry (bisphenol A) and the pharmaceutical industry (acetaminophen). The major photo-catalytic efficiency obtained (Fe/MCM-RHA(2.5)) is consistent with the highest presence of iron species, which are finely dispersed and stabilized on the silica structure, the isolated Fe³⁺ ions being the accessible and active sites for the reaction. Finally, a cheaper solid arising from the valorization of residual biomass and with excellent photocatalytic performance for the degradation of EDCs (above 99%, 75%, and 60% for BPA, ATZ, and ACE respectively, in a reaction time of 240 min) was obtained.

Fabrication of Bi1.81MnNbO6.72/sulfite system for efficient degradation of chlortetracycline

The design of eco-friendly Bi_1.81MnNbO_6.72/sulfite system for efficient degradation of chlortetracycline was achieved. The feasibility of synthesizing Bi_1.81MnNbO_6.72 by hydrothermal method was determined by X-ray diffraction. The magnetic test suggested that Bi_1.81MnNbO_6.72 possessed paramagnetic properties, indicating unpaired electrons were present. Scanning electron microscope and transmission electron microscopy images revealed that Bi_1.81MnNbO_6.72 octahedra exhibited exposed [1,1,1] crystal plane containing high density of Bi, Mn and Nb metal atoms. Large numbers of metal atoms will facilitate heterogeneous catalytic process. In a batch system with aeration, Bi_1.81MnNbO_6.72 could be used as sulfite activator for the disposal of chlortetracycline. The reaction kinetics of the degradation process conformed to the pseudo-second-order kinetic model. In Bi_1.81MnNbO_6.72/sulfite process, initial pH, Bi_1.81MnNbO_6.72 dosage, sulfite and chlortetracycline concentrations, as well as inorganic salt ions had great effect on chlortetracycline degradation. Under optimal conditions, the efficiency of Bi_1.81MnNbO_6.72/sulfite system for degradation of chlortetracycline could reach 76.2%. Moreover, Mn (II) plays a key role in the initiation of the catalytic reaction in Bi_1.81MnNbO_6.72/sulfite process. Generated SO₃^●‒ could act as main reactive species in Bi_1.81MnNbO_6.72/sulfite process, while HO^● was also involved. Three new degradation products were detected by UHPLC/MS/MS and the possible degradation pathways in this system were proposed. Based on this, we believe that Bi_1.81MnNbO_6.72/sulfite is a type of process for degradation of organic contaminants with research significance and application prospects.

Catalytic Oxidation of Tartrazine in Aqueous Solution Using a Pillared Clay with Aluminum and Iron

In this work, pillared bentonite with Al−Fe (Al−Fe−PILC) was synthesized and used as a heterogeneous Fenton-like catalyst in the oxidation of tartrazine azo-dye in an aqueous solution. The modification of bentonite with the Al-Fe mixed system in a concentrated medium, with ultrasound assisted intercalation was carried out, and the obtained catalyst was characterized by XRF, XRD, and N2 adsorption at 77 K. The oxidation of tartrazine with Al−Fe−PILC, using different amounts of H2O2, expressed as a multiple (1, 3, 6, and 9) of a stoichiometry amount required to completely oxidize the dye was evaluated. The reaction of catalytic wet peroxide oxidation (CWPO) of the dye with 400 mg of Al−Fe−PILC and 6 times the stoichiometric amount of H2O2 at 25 °C, reached 98.2±1.8% of decolorization, 51.9±1.9% of TOC removal and 71.5±1.8% of TN removal. Results of this study show that the oxidation of tartrazine increased with the amount of H2O2 up to a certain limit. This oxidation process can be considered as an alternative for treating wastewater containing azo-dye because the reaction takes place under mild experimental conditions (room temperature and atmospheric pressure). Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA  License (https://creativecommons.org/licenses/by-sa/4.0). 

Surface acidity and basicity of Mg/Al hydrotalcite for 2, 4-dichlorophenoxyacetic acid degradation with ozone: Mineralization, mechanism, and implications to practical water treatment

The Mg/Al hydrotalcite (Mg/Al HT) was firstly used as a heterogeneous ozonation catalyst and 2,4-dichlorophenoxyacetic acid (2,4-D) was efficiently degraded by Mg₃/Al HT with a COD removal of 68 %. It was higher than that of α-FeOOH with a COD removal of 50 %. The effects of Mg/Al atomic ratio, phosphate and pyrrole on the ozonation performance of Mg/Al HTs were also investigated. The X-ray photoelectron spectroscopy (XPS), nitrogen adsorption-desorption experiment and temperature programmed desorption of adsorbed CO₂ or NH₃ were used to characterize the surface properties of Mg/Al HT. The surface acidity and basity was proven to be responsible to the excellent ozonation activity of Mg/Al HT. The results of electron spin resonance (ESR) analysis and probe experiments confirmed that OH, O₂^- and ¹O₂ were involved in the 2,4-D degradation process and their contributions are as followed: OH > O₂- > ¹O₂. The synergistic effect of surface acid (ozone adsorption center) and base sites (catalytic center) determines Mg/Al HT in the enhanced catalytic ozone decomposition into reactive species. More important, the transition metal free based Mg/Al HTs is steady, non-toxic, naturally abundant and environment friendly, which provided a promising alternative in practical water treatment by catalytic ozonation.

Synthesis and catalytic utilization of bimetallic systems for wastewater remediation: A review

The environment is affected by agricultural, domestic, and industrial activities that lead to drastic problems such as global warming and wastewater generation. Wastewater pollution is of public concern, making the treatment of persistent pollutants in water and wastewater highly imperative. Several conventional treatment technologies (physicochemical processes, biological degradation, and oxidative processes) have been applied to water and wastewater remediation, but each has numerous limitations. To address this issue, treatment using bimetallic systems has been extensively studied. This study reviews existing research on various synthesis methods for the preparation of bimetallic catalysts and their catalytic application to the treatment of organic (dyes, phenol and its derivatives, and chlorinated organic compounds) and inorganic pollutants (nitrate and hexavalent chromium) from water and wastewater. The reaction mechanisms, removal efficiencies, operating conditions, and research progress are also presented. The results reveal that Fe-based bimetallic catalysts are one of the most efficient heterogeneous catalysts for the treatment of organic and inorganic contamination. Furthermore, the roles and performances of bimetallic catalysts in the removal of these environmental contaminants are different.

Conventional and emerging technologies for removal of antibiotics from wastewater

Antibiotics and pharmaceuticals related products are used to enhance public health and quality of life. The wastewater that is produced from pharmaceutical industries still contains noticeable amount of antibiotics, and this has remained one of the major environmental problems facing public health. The conventional wastewater remediation approach employed by the pharmaceutical industries for the antibiotics wastewater removal is unable to remove the antibiotics completely. Besides, municipal and livestock wastewater also contain unmetabolized antibiotics released by human and animal, respectively. The antibiotic found in wastewater leads to antibiotic resistance challenges, also emergence of superbugs. Currently, numerous technological approaches have been developed to remove antibiotics from the wastewater. Therefore, it was imperative to critically review the weakness and strength of these current advanced technological approaches in use. Besides, the conventional methods for removal of antibiotics such as Klavaroti et al., Homem and Santos also discussed. Although, membrane treatment is discovered as the ultimate choice of approach, to completely remove the antibiotics, while the filtered antibiotics are still retained on the membrane. This study found, hybrid processes to be the best solution antibiotics removal from wastewater. Nevertheless, real-time monitoring system is also recommended to ascertain that, wastewater is cleared of antibiotics.

Catalytic ozonation of phenylamine in water with a manganese ore

Recalcitrant pollutants, which form surface complexes with surface metal sites of the catalyst, are difficult to remove by catalytic ozonation in water. Phenylamine (PA), one of the refractory pollutants, was degraded by ozone catalysis with manganese ore in this paper. And the effectiveness and the mechanism of catalytic ozonation with manganese ore for the degradation of PA in water were studied. After the BET test, the specific surface area of the raw and calcined manganese ore was 27.65 m² g⁻¹ and 33.49 m² g⁻¹, respectively. The effects of solution pH, catalyst dose and reaction time on the degradation of PA were evaluated. Results showed that the catalytic potential of calcined manganese ore was better than that of raw manganese ore and ozonation alone in the degradation of PA. It revealed that the increase of hydroxyl radicals generated on the surface of the catalyst or in the solution improved PA degradation. Oxidation of free radicals was the main mechanism of PA degradation in the catalytic ozonation process, occurring with a pseudo-first-order reaction rate at a constant of 0.0993 min⁻¹ (CMP) under the pH of 7.20 and catalyst dose of 3 g L⁻¹. Also, an activation energy of 20.4 kJ mol⁻¹ for PA oxidation over CMP in the presence of O₃ was estimated.

Recalcitrant pollutants, which form surface complexes with surface metal sites of the catalyst, are difficult to remove by catalytic ozonation in water.

Photocatalytic degradation of methyl orange from wastewater using a newly developed Fe-Cu-Zn-ZSM-5 catalyst

Photo-Fenton oxidation is one of the most promising processes to remove recalcitrant contaminants from industrial wastewater. In this study, we developed a novel heterogeneous catalyst to enhance photo-Fenton oxidation. Multi-composition (Fe-Cu-Zn) on aluminosilicate zeolite (ZSM-5) was prepared using a chemical process. Subsequently, the synthesized catalyst was characterized by using X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), high-resolution transmission electron microscopy (HRTEM), energy dispersive X-ray (spectroscopy) (EDX), and Brunauer-Emmett-Teller (BET). Activity of the synthesized catalyst is analysed to degrade an azo dye, methyl orange. Taguchi method is used to optimize color removal and total carbon content (TOC) removal. The dye completely degraded, and 76% of TOC removal was obtained at optimized process conditions. The amount of catalyst required for the desired degradation of dye significantly reduced up to 92% and 30% compared to conventional homogenous and heterogeneous Fenton oxidation processes, respectively.

CeCu composite oxide for chlorophenol effective removal by heterogeneous catalytic wet peroxide oxidation

CeCu solid solution oxide catalysts were prepared by the complex method and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), and X-ray photoelectron spectroscopy (XPS). And its activity in the catalytic wet peroxide oxidation (CWPO) of 4-chlorophenol (4-CP) and 2,4-dichlorophenol (2,4-DCP) in water was investigated. The results showed that the Cu²⁺ ions dissolved into the CeO₂ lattice to form CeCu solid solution oxide with a coarse, interconnected, porous, and cotton-like morphology. The metal-oxygen bonds were weakened by the formation of solid solution in the CeCu oxide catalyst. This weakening facilitated the activation and decomposition of the H₂O₂ to form highly oxidative HO· species that can lead to significant chlorophenol mineralization. The formation of CeCu solid solution oxide can effectively inhibit the Cu ions to be leached from the used CeCu oxide catalysts, which can ensure the CeCu oxide catalysts to adapt to a wide pH range of 2.1-7.9 and exhibit good reusability. CWPO reaction of 4-CP and 2,4-DCP molecules on CeCu oxide catalysts conforms to the first-order kinetic equation: y = 6959.3x - 17.2 and y = 9725x - 25.4, respectively. And the reaction activation energies are 57.8 and 80.8 kJ/mol, respectively. The TOC removals of 4-CP and 2,4-DCP can exceed 88 and 82%, and the dechlorination rates of 4-CP and 2,4-DCP are higher than 95 and 99.5%, respectively.

Experimental Study of OH-Initiated Heterogeneous Oxidation of Organophosphate Flame Retardants: Kinetics, Mechanism, and Toxicity

The environmental risks and health impacts associated with particulate organophosphate flame retardants (OPFRs), which are ubiquitous in the global atmosphere, have not been adequately assessed due to the lack of data on the reaction kinetics, products, and toxicity associated with their atmospheric transformations. Here, the importance of such transformations for OPFRs are explored by investigating the reaction kinetics, degradation chemical mechanisms, and toxicological evolution of two OPFRs (2-ethylhexyl diphenyl phosphate (EHDP) and diphenyl phosphate (DPhP)) coated on (NH₄)₂SO₄ particles upon heterogeneous OH oxidation. The derived reaction rate constants for the heterogeneous loss of EHDP and DPhP are (1.12 ± 0.22) × 10^-12 and (2.33 ± 0.14) × 10^-12 cm³ molecules^-1 s^-1, respectively. Using recently developed real-time particle chemical composition measurements, particulate products from heterogeneous photooxidation and the associated degradation mechanisms for particulate OPFRs are reported for the first time. Subsequent cytotoxicity analysis of the unreacted and oxidized OPFR particles indicated that the overall particle cytotoxicity was reduced by up to 94% with heterogeneous photooxidation, likely due to a significantly lower cytotoxicity associated with the oxidized OPFR products relative to the parent OPFRs. The present work not only provides guidance for future field sampling for the detection of transformation products of OPFRs, but also strongly supports the ongoing risk assessment of these emerging chemicals and most critically, their products.

A New Route for Low Pressure and Temperature CWAO: A PtRu/MoS2_Hyper-Crosslinked Nanocomposite

PtRu/MoS₂ nanoparticles (NPs) (PtRu alloy partially coated by one-layer MoS₂ nanosheets) were prepared through a ‘wet chemistry’ approach. The obtained NPs were directly embedded, at 5 parts per hundred resin/rubber (phr) loading, in a poly (divinylbenzene-co-vinyl benzyl chloride) hyper-crosslinked (HCL) resin, synthesized via bulk polymerization of the resin precursors, followed by conventional FeCl₃ post-crosslinking. The obtained HCL nanocomposites were characterized to evaluate the effect of the NPs. It shows a high degree of crosslinking, a good dispersion of NPs and a surface area up to 1870 ± 20 m²/g. The catalytic activity of the HCL nanocomposite on phenol wet air oxidation was tested at low air pressure (P_air = 0.3 MPa) and temperature (T = 95 °C), and at different phenol concentrations. At the lower phenol concentration, the nanocomposite gives a total organic carbon (TOC) conversion of 97.1%, with a mineralization degree of 96.8%. At higher phenol concentrations, a phenol removal of 99.9%, after 420 min, was achieved, indicating a quasi-complete depletion of phenol, with a TOC conversion of 86.5%, corresponding to a mineralization degree of 84.2%. Catalyst fouling was evaluated, showing good reusability of the obtained nanocomposite.

Ozone-assisted catalytic oxidation of aqueous nitrite ions on HZSM-5 zeolites

Simultaneous removal of NO_x and SO₂ during the wet absorption process has made it possible for nitrogen resource utilization. However, nitrites formation at high ratio in absorption solution would limit its application. In this study, the catalytic oxidation behaviors of aqueous nitrite ions assisted by ozone on HZSM-5 zeolites with different SiO₂/Al₂O₃ ratios have been investigated. The experimental results revealed that the oxidation and disproportionation reactions of nitrite ions took place competitively, both of which were accelerated under acidic condition. Moreover, the introduction of HZSM-5 zeolites and ozone would significantly improve the nitrite oxidation rate, where the zeolites with high SiO₂/Al₂O₃ ratios were found to be more effective owing to the enhanced adsorption of nitrite ions and ozone. Based on the results under different operating conditions (such as O₃ concentration, HZSM-5 dosage, pH values and presence of radical scavengers etc.), the reaction mechanism was then proposed. The disproportionation reaction of nitrite ions mainly occurred in the bulk solution. And the catalytic oxidation of nitrite ions over zeolites proceeded via a non-radical surface reaction between the adsorbed nitrite ions and ozone/oxygen molecular.

Possible applications of coal fly ash in wastewater treatment

Management of coal fly ash as a particulate byproduct of coal burning has become an issue to be solved right away due to environmental concerns related to soil, water, and air pollution. Many attempts have been made by researchers for the conversion of coal fly ash into useful products while searching feasible avenues for its sustainable utilization. Wastewater remediation using coal fly ash is one such attempt solving both waste management and water quality issues. The characteristics like morphology, surface area, porosity, and chemical composition (silica, alumina, iron oxide, titania, etc.) make coal fly ash amenable material for potential application in wastewater treatment. Few reports have summarized the coal fly ash utilization in wastewater treatment but solely discussed the adsorption. Besides adsorption, the current paper aims to highlight the possibilities of using coal fly ash in wastewater treatment by different technologies that extend the utilization scope in the domains of filtration, Fenton process, photocatalysis, and coagulation. The promising use of coal fly ash as an adsorbent, membrane filter, Fenton catalyst, photocatalyst, and as an integral part of these structures is reviewed. Finally, the current trends and future prospects on utilization modes of coal fly ash in wastewater treatment are stated.

Molecular reactors for synthesis of polymeric nanocomposites with noble metal nanoparticles for catalytic decomposition of 4-nitrophenol

HYPOTHESIS

A new, facile in-situ method for synthesis of polymeric nanocomposites (NCs) with nanoparticles (NPs) of Au, Pt and Pd is proposed. The method involves reduction-coupled sorption of Au(III), Pt(VI), and Pd(II), which avoids diffusion limitations, allowing the precipitation and stabilization of the NPs directly in the polymeric matrix.

EXPERIMENTS

The obtained nanomaterials were characterized by transmission electron microscopy (TEM), and Fourier-transformation infrared spectroscopy (FT-IR). NPs loaded into polymers were also investigated using X-ray diffraction (XRD).

FINDINGS

Based on the results, it was concluded that the amino functionalities simultaneously reduced noble metals ions and capped the NPs. The average diameter of the obtained AuNPs ranged from 25 to 109 nm, while reduction-coupled sorption was carried out in 1 and 3 mol L^-1 HCl solutions, respectively. Applying a 0.1 mol L^-1 HCl solution containing Au(III), Pd(II) and Pt(VI), a NC with AuNPs and cubic-like PdNPs was fabricated, while using a solution of the same composition, but in 3 mol L^-1 HCl, resulted in formation of a NC with flower-like PtNPs. Ultimately, the selected NC based on a resin with functionalities derived from 1-(2-aminoethyl)piperazine and with bi-metallic active sites, i.e. AuNPs and PdNPs, revealed catalytic activity in the reduction of 4-nitrophenol.

Preparation and photocatalytic performance of tungstovanadophosphoric heteropoly acid salts

Tungstovanadophosphoric heteropoly acid H₅PW₁₀V₂O₄₀·5.76H₂O (HPWV) has been synthesized via stepwise acidification and gradual addition of elements. Some metals like Fe, Al and Cu were introduced into the heteropoly acid (HPA) in the molar ratio of 10 : 6, 10 : 6 and 10 : 4 respectively. The prepared catalysts were characterized by UV, FTIR, TG/DTA and XRD. The results indicated that HPWV and its metal salts all contain Keggin units, which are the primary structures of the heteropoly acids. The homogeneous photocatalytic degradation of phenol by heteropoly acid salts was studied in detail under artificial UV irradiation and addition of hydrogen peroxide (H₂O₂), and the effects of initial phenol and H₂O₂ concentrations on the rate of photocatalytic phenol degradation were examined. The results suggested that the heteropoly acid salts showed good catalytic activities for phenol degradation via the ·OH radical mechanism. Under irradiation with a 10 W Hg lamp, 96% phenol was degraded within less than 60 min in the solution containing 50 mg L⁻¹ phenol + 2 μmol L⁻¹ Fe₅(PW₁₀V₂O₄₀)₃ + 4 μmol L⁻¹ H₂O₂, with the performance of the catalysts in order FePWV > AlPWV > CuPWV > HPWV. This work demonstrated that the photo-Fenton reaction catalyzed by the heteropoly acid salts was a promising advanced oxidation tool for the treatment of phenol-containing wastewater.

Tungstovanadophosphoric heteropoly acid H₅PW₁₀V₂O₄₀·5.76H₂O (HPWV) has been synthesized via stepwise acidification and gradual addition of elements.

Kinetics of Catalytic Wet Peroxide Oxidation of Phenolics in Olive Oil Mill Wastewaters over Copper Catalysts

During olive oil extraction, large amounts of phenolics are generated in the corresponding wastewaters (up to 10 g dm^-3). This makes olive oil mill wastewater toxic and conventional biological treatment challenging. The catalytic wet peroxide oxidation process can reduce toxicity without significant energy consumption. Hydrogen peroxide oxidation of phenolics present in industrial wastewaters was studied in this work over copper catalysts focusing on understanding the impact of mass transfer and establishing the reaction kinetics. A range of physicochemical methods were used for catalyst characterization. The optimal reaction conditions were identified as 353 K and atmospheric pressure, giving complete conversion of total phenols and over 50% conversion of total organic carbon content. Influence of mass transfer on the observed reaction rate and kinetics was investigated, and parameters of the advanced kinetic model and activation energies for hydrogen peroxide decomposition and polyphenol oxidation were estimated.

Advanced treatment of biologically pretreated coal chemical industry wastewater using the catalytic ozonation process combined with a gas-liquid-solid internal circulating fluidized bed reactor

This paper investigated the performance of the combined system of catalytic ozonation and the gas-liquid-solid internal circulating fluidized bed reactor for the advanced treatment of biologically pretreated coal chemical industry wastewater (CCIW). The results indicated that with ozonation alone for 60min, the removal efficiency of chemical oxygen demand (COD) could reach 34%. The introduction of activated carbon, pumice, γ-Al₂O₃ carriers improved the removal performance of COD, and the removal efficiency was increased by 8.6%, 4.2%, 2%, respectively. Supported with Mn, the catalytic performance of activated carbon and γ-Al₂O₃ were improved significantly with COD removal efficiencies of 46.5% and 41.3%, respectively; however, the promotion effect of pumice supported with Mn was insignificant. Activated carbon supported with Mn had the best catalytic performance. The catalytic ozonation combined system of MnO_X/activated carbon could keep ozone concentration at a lower level in the liquid phase, and promote the transfer of ozone from the gas phase to the liquid phase to improve ozonation efficiency.

Chromium-zinc ferrite nanocomposites for the catalytic abatement of toxic environmental pollutants under ambient conditions

Catalytic abatement of 4-chlorophenol, 2,4-dichlorophenol and 2,4-dichlorophenoxy acetic acid in water was investigated by peroxide oxidation over chromium substituted zinc ferrite nanocomposites at ambient conditions. The structural and chemical properties of composites synthesized by sol-gel auto combustion method was studied by X-ray diffraction, Fourier Transform Infra-Red spectroscopy, Transmission Electron Microscopy, surface area, X-ray Fluorescence spectroscopy, Temperature Programmed Reduction and Desorption techniques. Complete removal of 4-CP, DCP and 2,4-D was achieved within 60, 75 and 90min with 96.7/90.5%, 93.88/77.23% and 88.55/62.1% of COD/TOC removal respectively at 298K and 343K. Influence of reaction variables including reaction temperature, oxidant concentration, substrate concentration, catalyst dosage and its composition on the removal efficiency was studied. Kinetic study revealed that wet peroxide oxidation followed a first order kinetic model with rate constant and activation energy of 3.5×10^-2min^-1/10.7kJ/mole, 9.5×10^-3min^-1/12.9kJ/mole and 2.29×10^-2min^-1/17.7kJ/mole respectively for 4-CP, DCP and 2,4-D. The results of five consecutive catalytic runs from X-ray diffraction, Brunauer Emmet Teller surface area and leaching studies from Atomic Absorption Spectrophotometry (AAS) revealed the excellent stability of the catalyst. Scavenging effect of n-butanol on hydroxyl radical indicated a heterogeneous free radical mechanism.

Preparation of Fe-Cu-kaolinite for catalytic wet peroxide oxidation of 4-chlorophenol

Fe-Cu-kaolinites were prepared by co-precipitation and hydrothermal methods, and characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM), where 2 wt.% natural kaolinite was dispersed, and the ratios of (Al + Fe + Cu)/clay = 10 mmol/g and Al/(Fe + Cu) = 5/1 were maintained. The effect of different drying methods (vacuum drying, ethanol exchange drying, freeze-drying, microwave drying, normal oven drying) and different Fe/Cu molar ratio (0/2, 0.4/1.6, 0.8/1.2, 1/1, 1.2/0.8, 1.6/0.4, 2/0) was also assessed. Catalytic wet peroxide oxidation (CWPO) reaction of 4-chlorophenol (4-CP) was used to probe the reactivity and activity of the materials prepared. The results showed that Fe and Cu could be successfully intercalated into the interlayer of kaolinite by hydrothermal method, where specific surface area and pore volume increased by 19 times and 7 times, respectively; the intensity of basal space (001) reflection peak was reduced by 80%, and tip width was doubly increased. The catalyst possessed higher reactivity, with 85.5% of 4-CP conversion being observed, whereas only 15.2% of 4-CP was removed over raw kaolinite. High-power microwave drying (720 W) was the best drying method, because it resulted in greater microstructure and thus higher reactivity (85.3% of 4-CP conversion), with lower active metal (Fe or Cu) leaching (3.96 mg L^-1). Fe/Cu molar ratio of 0.8-1.0/1.2-1.0 was considered as the optimum ratio in pillaring solution, for maintaining higher catalytic activity (85-90% of 4-CP conversion) and lower metal (Fe or Cu) leaching (7-9.3 mg L^-1).

Synthesis, characterization and photocatalytic activity of mixed-metal oxides derived from NiCoFe ternary layered double hydroxides

Ternary NiCoFe mixed-metal oxides have demonstrated higher photoelectrocatalytic activity in degrading methylene blue (MB).

Fluorine-doped carbon nanotubes as an efficient metal-free catalyst for destruction of organic pollutants in catalytic ozonation

Metal-free carbon materials have been presented to be potential alternatives to metal-based catalysts for heterogeneous catalytic ozonation, yet the catalytic performance still needs to be enhanced. Doping carbon with non-metallic heteroatoms (e.g., N, B, and F) could alter the electronic structure and electrochemical properties of original carbon materials, has been considered to be an effective method for improving the catalytic activity of carbon materials. Herein, fluorine-doped carbon nanotubes (F-CNTs) were synthesized via a facile method and characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. The as-synthesized F-CNTs exhibited notably enhanced catalytic activity towards catalytic ozonation for the degradation of organic pollutants. The oxalic acid removal efficiency of optimized F-CNTs was approximately two times as much as that of pristine CNTs, and even exceeded those of four conventional metal-based catalysts (ZnO, Al₂O₃, Fe₂O₃, and MnO₂). The XPS and Raman studies confirmed that the covalent CF bonds were formed at the sp³ C sites instead of sp² C sites on CNTs, not only resulting in high positive charge density of C atoms adjacent to F atoms, but remaining the delocalized π-system with intact carbon structure of F-CNTs, which then favored the conversion of ozone molecules (O₃) into reactive oxygen species (ROS) and contributed to the high oxalic acid removal efficiency. Furthermore, electron spin resonance (ESR) studies revealed that superoxide radicals (O₂^-) and singlet oxygen (¹O₂) might be the dominant ROS that responsible for the degradation of oxalic acid in these catalytic systems.

Novel Magnetic Zinc Oxide Nanotubes for Phenol Adsorption: Mechanism Modeling

Considering the great impact of a material's surface area on adsorption processes, hollow nanotube magnetic zinc oxide with a favorable surface area of 78.39 m²/g was fabricated with the assistance of microwave technology in the presence of poly vinyl alcohol (PVA) as a stabilizing agent followed by sonic precipitation of magnetite nano-particles. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) micrographs identified the nanotubes' morphology in the synthesized material with an average aspect ratio of 3. X-ray diffraction (XRD) analysis verified the combination of magnetite material with the hexagonal wurtzite structure of ZnO in the prepared material. The immobilization of magnetite nanoparticles on to ZnO was confirmed using vibrating sample magnetometry (VSM). The sorption affinity of the synthesized magnetic ZnO nanotube for phenolic compounds from aqueous solutions was examined as a function of various processing factors. The degree of acidity of the phenolic solution has great influence on the phenol sorption process on to magnetic ZnO. The calculated value of ΔH⁰ designated the endothermic nature of the phenol uptake process on to the magnetic ZnO nanotubes. Mathematical modeling indicated a combination of physical and chemical adsorption mechanisms of phenolic compounds on to the fabricated magnetic ZnO nanotubes. The kinetic process correlated better with the second-order rate model compared to the first-order rate model. This result indicates the predominance of the chemical adsorption process of phenol on to magnetic ZnO nanotubes.

Fabrication of novel nanoporous copper powder catalyst by dealloying of ZrCuNiAl amorphous powders for the application of wastewater treatments

The nanoporous copper (Cu) powders (NPCPs) co-existing with Cu₂O was fabricated by dealloying of atomized Zr-Cu-Ni-Al amorphous powders. The as-fabricated NPCPs, with an inner core and outer shell, showed a large specific surface area of 7.52m²g^-1 and exhibited significantly superior degradation ability in the presence of hydrogen peroxide (H₂O₂) for the complete elimination of methyl orange (MO) under both acidic and neutral environments. The enhanced catalytic decomposition properties of H₂O₂ by NPCPs were mainly attributed to the large specific surface area and three-dimensional continuous nanoporous structure with unique atomic steps on the ligament surfaces. The mechanistic investigations revealed that Cu₂O/H₂O₂ reactions in acidic environment and Cu⁰/H₂O₂ reactions in neutral environment, respectively, were responsible for the high degradability of azo dyes, indicating that NPCPs/H₂O₂ could be a good Fenton-like reagent in application of wastewater treatments.