Cloud point extraction for determination of lead in blood samples of children, using different ligands prior to analysis by flame atomic absorption spectrometry: a multivariate study

A comprehensive review of portable syringe systems using micropipette-based extraction techniques for metal analysis

The release of harmful compounds, particularly dangerous metal ions, into the environment has drawn deep concern from the scientific community. Therefore, it has become common in research to evaluate and quantify the harmful concentrations in the presence of these metal ions in several real samples (food, water, and biological samples). To increase sensitivity and lessen the impact of the matrix, sample pretreatment is a helpful strategy to implement before analysis. The limitations of conventional methods have been recently significantly reduced by developing new analytical approaches such as microextraction techniques. The miniaturization of conventional solid-phase extraction (SPE) led to solid-phase microextraction (SPME), drastically reducing both adsorbent use and extraction phase volume. SPME is defined in the present context as a modified extraction technique that employs a portable syringe system attached to micropipette tips. The SPME is considered one of the most appropriate sample preparation tools due to its compatibility with different detection techniques for different metal ions. The current review focuses on SPME based on a portable syringe (attaches to a micropipette tip) system because it has many advantages over conventional solid-phase extraction. It can be designed very simply in a syringe system, a very small quantity of the sorbent has to be kept in the tip, tube, or inside a syringe as a plug and combined with various analytical instruments. Many researchers have designed their own by using homemade tips packed with a sorbent to increase extraction capability and selectivity. According to the current review, there is a lot of potential for increasing the efficacy and efficiency of metal ion extraction from complicated matrices using portable syringe SPME. Studies have shown that when compared to conventional approaches, it performs better in terms of sensitivity, selectivity, and user-friendliness. Furthermore, its application to a wider range of sample types has been enhanced by the flexibility in constructing unique sorbent tips. Conclusively, the developments in portable syringe SPME have addressed several limitations of conventional techniques, positioning it as a robust and versatile tool for environmental monitoring and analysis of hazardous metal ions.

Development of ratiometric fluorescent probes based on peptides for sensing Pb2+ in aquatic environments and human serum

The detection of Pb²⁺ ions in aquatic environments and biofluid samples is crucial for assessment of human health. Herein, we synthesized two fluorescent probes (1 and 2) consisting of the peptide receptor for Pb²⁺ and a benzothiazolyl-cyanovinylene fluorophore that exhibited excimer-like emission when it aggregated. The peptide-based probes sensitively detected Pb²⁺ in purely aqueous solution (1% DMF) through ratiometric fluorescent response with a decrease in monomer emission at 520 nm and an increase in excimer emission at 570 nm. Specially, probe 2 showed remarkable detection features such as high selectivity for Pb²⁺over 15 metal ions, high binding affinity (K_d = 5.83 × 10^-7 M) for Pb²⁺, significant emission intensity changes, low detection limit (3.8 nM) of Pb²⁺, high water solubility, and visible light excitation (450 nm). Probe 2 was successfully used to quantify nanomolar concentration (0 ∼ 800 nM) of Pb²⁺ in real water samples (ground water and tap water). Specially, 2 was successfully applied for the quantification of Pb²⁺ in human serum by combination of microwave-assisted human serum digestion and filtration of digested serum by anion exchange cartridge. We clearly investigated the binding mode of 2 with Pb²⁺ using ¹H NMR, IR spectroscopy, pH titration, confocal microscopy, and size analysis. The peptide-based fluorescent probe might have great application potential for sensing Pb²⁺ in aquatic environments and biofluid samples.

Synthesis of a magnetic SBA-15-NH2@Dual-Template Imprinted Polymer for solid phase extraction and determination of Pb and Cd in vegetables; Box Behnken design

In this study, a simple one-step method was applied for extraction and determination of lead and cadmium. The significant variables in extraction and pre-concentration were identified using analysis of variance and their behavior was modeled. Dual-template imprinted polymer was synthesized on modified Mesoporous silica structures coated with Fe₃O₄ magnetic nanoparticles. The optimum condition was 6.12 for pH, 40.62 mg for the polymer amount and 17.38 for the ultrasonic time. Concentration range, correlation coefficient, limit of detection and relative standard deviation for lead were reported to be 0.5-950, 0.9988, 0.35 μg L^-1 and 3.5%, respectively. For cadmium the above mentioned figure of merits were 0.3-980, 0.9969, 0.15 μg L^-1 and 2.4%, respectively. The adsorption capacities for lead and cadmium were reported to be 10.28 and 10.38, while their imprinting factors were 5.89 and 6.36, respectively.

A novel CPE procedure by oil-in-water microemulsion for preconcentrating and analyzing thorium and uranium

A novel cloud point extraction (CPE) procedure was developed to preenrich Th4+ and UO2 2+ by oil-in-water (O/W) microemulsion. Coupling CPE to ICP-MS, the separation and analysis were achieved at a trace level, in which the low detection limits were 0.019 and 0.042 ng mL−1 for Th(IV) and U(VI), respectively. N,N′-diethyl-N,N′-ditolyl-2,9-diamide-1,10-phenanthroline (Et-Tol-DAPhen), as an extremely hydrophobic extractant, was failed to dissolve in single or mixed micelles, but was successfully solubilized to CPE system owing to O/W microemulsion. The extraction efficiency and selectivity for Th4+ and UO2 2+ were excellent under acidic condition of 1.0 mol L−1 HNO3, and the recovery of ultra-trace Th4+ and UO2 2+ was almost 100% even at the presence of large amounts of lanthanides, exhibiting high tolerance limits for lanthanides. The solubilization, extraction and coordination behaviours were studied systematically via DLS, UV–vis, 1H NMR and FT-IR. Moreover, the solubilization of N,N′-dioctyl-N,N′-dioctyl-2,9-diamide-1,10-phenanthroline (Oct-Oct-DAPhen) and efficient extraction for UO2 2+ were also realized by O/W microemulsion, which further proved the feasibility of the method.

Evaluate the exposure of toxic metals via drinking water and smoking nonbranded cigarette in malnourished women by modified single/two-step cloud point extraction

Presently, the exposure of heavy metals (cadmium and lead) was determined in biological sample (serum) of women (pregnant and nonpregnant) who belong to low socioeconomic group (malnutrition). The cadmium (Cd) and lead (Pb) were determined in drinking water and locally produced cigarette (bidi), smoking by women of childbearing age. The preconcentration of heavy metals in serum, water, and tobacco of bidi were carried out by cloud point extraction at single and two-step methods before determination by atomic absorption spectrometry with flame mode. The Cd and Pb in the water- and acid-digested serum and tobacco samples were treated with a complexing reagent 1-(2-pyridylazo)-2-naphthol (PAN). The hydrophobic complex of Cd and Pb was entrapped in Triton X-114. For the first step, the entrapped analytes in Triton X-114 was diluted with alcoholic acid (0.2 mol/L of HNO₃) and subjected to FAAS, whereas for the second step of CPE, the surfactant-rich analyte was subjected to the second round of enrichment method. Lastly, the analyte was back-extracted in acidic solution (0.2 mol/L) and analyzed by FAAS. The all significant variable was optimized for optimal recovery of Cd and Pb. The recommended single/two-step cloud point extraction method was validated by simultaneously evaluated matrices matched certified reference materials of water, serum, and tobacco. The resulted data indicated that the groundwater samples contained elevated concentrations of Cd and Pb than recommended values for drinking water by WHO, while the contents of Cd and Pb were observed about two-fold higher in nonbranded cigarette (bidi) than branded cigarette. It was observed that there were about 3 to 4 times higher concentrations of both toxic metals in blood serum of smoker malnourished women group than in referent nonsmoker women. Graphical abstract.

Pre-Concentration Based on Cloud Point Extraction for Ultra-Trace Monitoring of Lead (II) Using Flame Atomic Absorption Spectrometry

The cloud point extraction (CPE) method was successfully used for the isolation and pre-concentration of ultra-low concentration of Pb prior to its determination by flame atomic absorption spectrometry (FAAS). Lead(II) reacts with methyl 4,20-diisobutyl-2,5,8,16,19,22- hexaoxo-7,17-dipropyl-3,6,9,15,18,21-hexaaza-1(2,6)-pyridinacyclo-docosaphane-10-carboxylate (DLNL) as chelating agent in the presence of octylphenoxypolyethoxyethanol (Triton X-114) as a nonionic surfactant giving a surfactant-rich phase chelate which could be used for CPE. Factors affecting the CPE such as solution pH, concentrations of the chelating ligand and surfactant, temperature of equilibration, and time were optimized. The efficacy features of the proposed protocol such as linear range, lower limit of detection, pre-concentration, and progress factors were evaluated. The method revealed a wide linear range in the range of 7–250 ng/mL of Pb2+ with a limit of detection of 5 ng/mL using FAAS. Validation of the presented protocol revealed good performance characteristics including high between-batch repeatability, high precision, wide linear range, low limit of detection, and acceptable accuracy. The presented procedure was successfully introduced for the separation and quantification of lead (II) in wastewater samples with acceptable results.

Molecular mechanisms of lead-induced changes of selenium status in mice livers through interacting with selenoprotein P

As a heavy metal generally considered to be toxic, lead displays the destruction of the antioxidant system and causes oxidative damage through animal, cellular and molecular evidences. Selenium exists in the form of selenocysteine (Sec) upon its incorporation into selenoproteins and plays vital roles in protection from oxidative stress caused by toxic materials such as lead. This study investigated mechanisms of lead-induced changes of selenium status both at the animal and molecular levels. Total selenium concentrations in blood plasma, contents of glutathione peroxidase 3 (Gpx3) and selenoprotein P (SelP) in blood plasma and mRNA levels of key selenoproteins in mice livers were significantly inhibited after lead exposure, and indicators of oxidative damages in mice livers caused by lead also presented significantly higher, including levels of reactive oxygen species, malonaldehyde concentration and TNF-α levels. To further confirm the hypothesis that lead may disturb selenium status through affecting SelP function, we investigated molecular mechanisms of lead on SelP in vitro. Results indicated that lead changed secondary structure of SelP by loosening and destruction its skeleton. This work presents molecular mechanisms changes of selenium status in mice livers caused by lead combined in vivo and in vitro studies, and contributes to a better understanding of lead toxicity on human health.

A new approach for separation and recovery of betaine from beet molasses based on cloud point extraction technique

The aim of this work was to explore the possibility of the application of cloud point extraction (CPE) method in micelle media to recovery betaine from beet molasses. Response surface method was employed to assess the effects of surfactant concentration, molasses concentration, incubation time, pH, electrolyte concentration, mixing time, and surfactant type on efficiency of betaine recovery from beet molasses. Also, a mathematical model was developed to predict the effect of each variable and their interactions on the efficiency of betaine recovery. The model showed that best surfactant was Triton X-114 and under the optimum conditions, betaine recovery from beet molasses was achieved up to 80% when three CPE steps with total of 1.5% (w/v) of surfactant were used. Subsequently, betaine was recovered nearly 100% from surfactant rich phase after adjusting pH at 2.5 and re-incubation at 40 °C. The results showed that the proposed method is suitable for extraction of betaine from beet molasses.

Application of ultrasonically modified cloud point extraction method for simultaneous enrichment of cadmium and lead in sera of different types of gallstone patients

A novel and greener ultrasonically assisted/modified cloud point extraction procedure for the simultaneous preconcentration of lead and cadmium in serum samples of different types of gallstone patients was developed. The chelates of the under study metals, formerly formed with 8-hydroxyquinoline, were extracted in the micelles of a nonionic surfactant prior to analysis by flame atomic absorption spectrometer (FAAS). After the arrival of the cloud point, the critical micellar mass produced was homogenously dispersed in the aqueous phase with the help of ultrasound energy. The reliability of the developed procedure was tested by relative standard deviation (% RSD), which was found to be <5%. The performance of the proposed procedure was checked by applying to certified reference material and spiking standard in real samples. All the experimental parameters were optimized. The developed procedure of Um-CPE was applied successfully for the analysis of the target heavy metals in serum samples of different types of gallstone patients and referents. The higher levels of the understudy metals were observed in the patients as compared to the referents but the levels of the both metal were found to be considerably higher in patients with pigmented gallstones.

A new tunable dispersive liquid-liquid micro extraction method developed for the simultaneous preconcentration of lead and cadmium from lakes water: a multivariate study

A green tunable dispersive liquid-liquid micro extraction (TDLLME) technique was established for the simultaneous enrichment of lead (Pb) and cadmium (Cd) from different lakes water before analysis by flame atomic absorption spectrometry (FAAS). A solvent known as tunable polarity solvent (TPS), mixture of 1,8-diazabicyclo-[5.4.0]-undec-7-ene (DBU) and 1-decanol, has been employed as extractant in aqueous medium. In first step this mixture can be made polar by slowly bubbling the antisolvent trigger (CO₂) through the solution, which makes a monophasic solution. During this step hydrophobic complexes of the metals with 8-hydroxy quinoline (8-HQ) were extracted by TPS. Then the mixture was switched back to hydrophobic one by heating and/or bubbling nitrogen, turning the mixture into two phases again. In second phase the metals were leached out from the complexes entrapped in TPS, by treating with a solution of nitric acid and exposing the mixture to CO₂, which switched the mixture into single phase. Then N₂ purging and/or heating again turned the mixture into two phases. The acidic aqueous phase containing the metals was introduced to FAAS for analysis, whereas TPS was recycled for next experiment. Different parameters, affecting the efficiency the technique, were optimized by multivariate approach. The method was applied to certified reference material of water and to a real sample spiked with standards of known concentration, to confirm its validity and accuracy. LOD obtained for Pb and Cd were 0.560 and 0.056μgL^-1 respectively. The developed method was applied successfully to the real water samples of two lakes of Sindh, Pakistan.

Determination of cadmium in cosmetics from Kermanshah, Iran by graphite furnace atomic absorption spectrometry

Continuous sample drop flow-based microextraction (CSDF-ME) combined with graphite furnace atomic absorption spectrometry (GFAAS) has been developed as a high-performance preconcentration technique for the determination of cadmium in cosmetic samples.

Deep eutectic liquid organic salt as a new solvent for carrier-mediated hollow fiber liquid phase microextraction of lead from whole blood followed by electrothermal atomic absorption spectrometry

In the present work, for the first time, a new carrier-mediated hollow fiber liquid phase microextraction (CM-HFLPME) technique was applied for the determination of lead in whole blood samples by means of ETAAS.

Zinc Chloride and Lead Acetate-Induced Passive Avoidance Memory Retention Deficits Reversed by Nicotine and Bucladesine in Mice

It is very important to investigate the neurotoxic effects of metals on learning and memory processes. In this study, we tried to investigate the effects and time course properties of oral administration of zinc chloride (25, 50, and 75 mg/kg, for 2 weeks), lead acetate (250, 750, 1,500, and 2,500 ppm for 4, 6 and 8 weeks), and their possible mechanisms on a model of memory function. For this matter, we examined the intra-peritoneal injections of nicotine (0.25, 0.5, 1, and 1.5 mg/kg) and bucladesine (50, 100, 300, and 600 nM/mouse) for 4 days alone and in combination with mentioned metals in the step-through passive avoidance task. Control animals received saline, drinking water, saline, and DMSO (dimethyl sulfoxide)/deionized water (1:9), respectively. At the end of each part of studies, animals were trained for 1 day in step-through task. The avoidance memory retention alterations were evaluated 24 and 48 h later in singular and combinational studies. Zinc chloride (75 mg/kg) oral gavage for 2 weeks decreased latency times compared to control animals. Also, lead acetate (750 ppm oral administrations for 8 weeks) caused significant lead blood levels and induced avoidance memory retention impairments. Four-days intra-peritoneal injection of nicotine (1 mg/kg) increased latency time compared to control animals. Finally, findings of this research showed that treatment with intra-peritoneal injections of nicotine (1 mg/kg) and/or bucladesine (600 nM/mouse) reversed zinc chloride- and lead acetate-induced avoidance memory retention impairments. Taken together, these results showed the probable role of cholinergic system and protein kinase A pathways in zinc chloride- and lead acetate-induced avoidance memory alterations.

Simple and green switchable dispersive liquid–liquid microextraction of cadmium in water and food samples

A green, switchable aqueous, dispersive liquid–liquid microextraction method is introduced for the first time as a preconcentration/separation tool for measuring trace levels of cadmium in real water and food samples.

“One-drop-of-blood” electroanalysis of lead levels in blood using a foam-like mesoporous polymer of melamine–formaldehyde and disposable screen-printed electrodes

A foam-like mesoporous melamine–formaldehyde polymer was synthesized and deposited on disposable screen-printed electrodes for the electroanalysis of Pb²⁺ ions in blood.

Exposure of lead to mothers and their new born infants, residents of industrial and domestic areas of Pakistan

Prenatal and early-life exposure to lead (Pb) is hypothesized to have adverse effects on childhood health. The aim of this study was to evaluate the prenatal exposure to Pb and its adverse effects on mothers and their infants who are residents of industrial (exposed) and domestic areas (referents) in Karachi, Pakistan. The biological samples (scalp hair and blood) of mother-infants pairs were analyzed for Pb levels by atomic absorption spectrometry after microwave-assisted acid digestion method. The Pb levels in scalp hair and blood samples of exposed mothers were found in the range of 7.52-8.70 μg/g and 115-270 μg/L, respectively, which were significantly higher than those values obtained for referent mothers (p < 0.001). The Pb levels in the blood (umbilical cord) and hair of neonates of exposed mother that were found in the range of 83-178 μg/L and 4.95-7.23 μg/g, respectively, were significantly higher than the obtained values of referent neonates (p > 0.001). The correlation between maternal and cord blood of both groups was found in the range of 0.708-0.724 (p < 0.01). It was observed that there were higher Pb burdens in exposed mothers and their infants as compared to referent mothers-neonates.

Improvement of the cloud point extraction of uranyl ions by the addition of ionic liquids

The cloud point extraction (CPE) of uranyl ions by different kinds of extractants in Triton X-114 (TX-114) micellar solution was investigated upon the addition of ionic liquids (ILs) with various anions, i.e., bromide (Br(-)), tetrafluoroborate (BF4(-)), hexafluorophosphate (PF6(-)) and bis[(trifluoromethyl)sulfonyl]imide (NTf2(-)). A significant increase of the extraction efficiency was found on the addition of NTf2(-) based ILs when using neutral extractant tri-octylphosphine oxide (TOPO), and the extraction efficiency kept high at both nearly neutral and high acidity. However, the CPE with acidic extractants, e.g., bis(2-ethylhexyl) phosphoric acid (HDEHP) and 8-hydroxyquinoline (8-HQ) which are only effective at nearly neutral condition, was not improved by ILs. The results of zeta potential and (19)F NMR measurements indicated that the anion NTf2(-) penetrated into the TX-114 micelles and was enriched in the surfactant-rich phase during the CPE process. Meanwhile, NTf2(-) may act as a counterion in the CPE of UO2(2+) by TOPO. Furthermore, the addition of IL increased the separation factor of UO2(2+) and La(3+), which implied that in the micelle TOPO, NTf2(-) and NO3(-) established a soft template for UO2(2+). Therefore, the combination of CPE and IL provided a supramolecular recognition to concentrate UO2(2+) efficiently and selectively.

Determination of lead in biological samples of children with different physiological consequences using cloud point extraction method

In present study, lead (Pb) level in biological samples of children with physiological disorders (liver, bone, and gastrointestinal; age ranged 1-10 years) have been assessed. For comparison purpose, age-matched healthy children were also selected. Cloud point extraction (CPE) was employed for preconcentration of Pb in acid-digested biological samples prior to its determination by flame atomic absorption spectrometry (FAAS). Dithizone (diphenylthiocarbazone) and nonionic surfactant Triton X-114 (TX-114) were used as complexing reagent and extractant, respectively. The effects of several experimental variables on proposed CPE were evaluated. Under the optimum experimental conditions, the observed detection limit (LOD) and the enhancement factor (EF) were 0.08 μg L(-1) and 53, respectively. Relative standard deviation (RSD) of 10 μg L(-1) Pb was 3.4 %. It was observed that children with liver-, bone-, and gastrointestinal-related disorders had three- to fourfold higher Pb level in blood and scalp hair samples.

Simultaneous preconcentration of toxic elements in artificial saliva extract of smokeless tobacco product, mainpuri by cloud point extraction method

It has been extensively investigated that smokeless tobacco chewing can lead mainly to inflammation of oral cavity. In present study, the total and artificial saliva extracted toxic elements, arsenic, cadmium, nickel and lead were estimated in smokeless tobacco product, mainpuri. Cloud point extraction has been used for the preconcentration of arsenic, cadmium, nickel and lead in artificial saliva extract, using complexing reagent, ammonium pyrrolidinedithiocarbamate. Total and extractable toxic elements were measured by electrothermal atomic absorption spectrometry. The chemical variables of cloud point extraction were optimized. The validity of methodology was tested by simultaneously analyzing certified reference material (Virginia tobacco leaves) and spike recovery test. The artificial saliva extractable levels of arsenic, cadmium, nickel and lead ranged from 15-22, 45-70, 35-58, and 18-32%, respectively, of total elemental contents in mainpuri samples. It was estimated that intake of 10g of different brands of mainpuri contributing the 5.88, 55.0, 45.0 and 40.3% of the provisional maximum tolerable daily intake for arsenic, cadmium, nickel and lead, respectively for adults of ~60kg.

Complex-forming organic ligands in cloud-point extraction of metal ions: a review

Cloud-point extraction (CPE), an easy, safe, environmentally friendly, rapid and inexpensive methodology for preconcentration and separation of trace metals from aqueous solutions has recently become an attractive area of research and an alternative to liquid-liquid extraction. Moreover, it provides results comparable to those obtained with other separation techniques and has a greater potential to be explored in improving detection limits and other analytical characteristics over other methods. A few reviews have been published covering different aspects of the CPE procedure and its relevant applications, such as the phenomenon of clouding, the application in the extraction of trace inorganic and organic materials, as well as pesticides and protein substrates from different sources, or incorporation of CPE into an FIA system. This review focuses on general properties of the most frequently used organic ligands in cloud-point extraction and on literature data (from 2000 to 2012) concerning the use of modern techniques in determination of metal ions' content in various materials. The article is divided according to the class of organic ligands to be used in CPE.

Simultaneous preconcentration of copper and mercury in water samples by cloud point extraction and their determination by inductively coupled plasma atomic emission spectrometry

A cloud-point extraction process coupled to ICP-OES by using 3-nitro benzaldehyde thiosemicarbazone (3-NBT) as complexing agent was developed for the simultaneous preconcentration and determination of copper and mercury in water samples. The variables affecting the complexation and extraction steps were optimized. Under the optimum conditions (i.e. 1.5×10(-5) mol L(-1) ligand, 0.3% (v/v) Triton X-114, 55 °C equilibrium temperature, incubation time of 30 min) the calibration graphs were linear in the range of 5-120 and 10-100 ng mL(-1) with enhancement factor of 82.7 and 51.3 for Cu(2+) and Hg(2+), respectively. The preconcentration factors were 28.6 in both cases and detection limits were obtained 0.48 for Cu and 1.1 ng mL(-1) for Hg. The precisions (R.S.D.%) for five replicate determinations at 50 ng mL(-1) of copper and mercury were better than 1.8% and 3.2%, respectively. The accuracy of the proposed method is validated by analyzing a certified reference material of water (RTC-QCI-049) with satisfactory results. Finally, the proposed method was utilized successfully for the determination of copper and mercury in surface water (river), tap water and bottled mineral water samples.

Combination of flotation and flame atomic absorption spectrometry for determination, preconcentration and separation of trace amounts of metal ions in biological samples

An efficient enrichment procedure based on the combination of flame atomic absorption spectrometry (FAAS) and flotation for determination of Cd2+, Ag+ and Zn2+ ions in various biological samples using new collector is studied. The influence of pH, amount of 2-(((1H-benzo[d]imidazol-2-yl)methoxy)methyl)-1H-benzo[d]imidazole (HBIMMHBI) as collector, sample matrix, type and amount of eluting agent, type and amount of surfactant as floating agent, ionic strength and air flow rates on the extraction efficiency were evaluated and optimized. It is ascertained that under study metal ions is preconcentrated simultaneously from matrix in the presence of 0.005 M HBIMMHBI, 0.085% (w/v) of SDS form 750 mL at pH 6.5. The floated complexes metal ions eluted quantitatively with 6 mL of 1.0 M HNO3 in methanol lead to achieve preconcentration factor of 125. The detection limits for analyte ions were in the range of 1.3–2.4 ng mL-1, with recoveries more than 95% and relative SD lower than 4%.