Application of calcium peroxide in water and soil treatment: A review

Unveiling the dual role of calcium peroxide in enhancing green rust-catalyzed arsenite oxidation and stabilization

Iron oxyhydroxide redox processes coupled with reactive oxygen species (ROS) generation play a critical role in the transformation of arsenic (As). However, low ROS generation limits the detoxification and stabilization of As(III). In this study, we propose a novel strategy by integrating Fe(II) rich green rust (GR) with calcium peroxide (CaO2) for the efficient transformation of As(III) under oxic conditions. The results demonstrate that the introduction of CaO2 greatly enhances the oxidation and immobilization of As(III) by GR. Quenching experiments reveal that H2O2, ·O2-, and 1O2 are the primary ROS responsible for the oxidation of As(III). Importantly, CaO2 significantly boosts the production of key ROS in the GR/CaO2 system. Additionally, the introduction of CaO2 facilitates the transformation of both non-specific and specific adsorbed As into non-extractable As, improving the stability of immobilized As. Our findings unveil that CaO2 serves a dual role in promoting GR-catalyzed As(III) oxidation and stabilization by enhancing ROS production and forming iron-arsenic-calcium complexes. Moreover, the application of GR/CaO2 in As-contaminated soil can rapidly reduce the risk of As leaching in different scenarios. Therefore, this study provides a new strategy using CaO2 coupled with iron redox process to enhance oxidation and stabilization of arsenic in water and soil.

Enhancing sulfide mitigation via the synergistic dosing of calcium peroxide and ferrous ions in gravity sewers: Efficiency and mechanism

Chemical dosing constitutes an effective strategy for sulfide control in sewers; however, its efficacy requires further optimization and enhancement. In this study, a novel dosing strategy using the synergistic dosing of calcium peroxide (CaO2) and ferrous ions (Fe2+) for sulfide control was proposed, and its efficacy in controlling sulfides was evaluated using a long-term laboratory-scale reactor. The results showed that adding CaO2-Fe2+ improves the effect of sulfide control. When the ratio of the agent to the sewage (w/v) was 0.30 %, the RT50 of sulfide production rate was 8.34 days. The analysis of microbial communities in sewage biofilm revealed that the relative abundances of sulfate-reducing bacteria (SRB) and sulfide-oxidizing bacteria (SOB) demonstrated an overall downward tendency, suggesting that the potent oxidizing •OH generated by the synergism of CaO2 and Fe2+ could indiscriminately restrain the growth of microorganisms. Additionally, intracellular metabolic pathways, along with enzyme activities and the relative abundances of genes associated with sulfide metabolism, were significantly impaired. The cost of CaO2-Fe2+ synergistic dosing is 31.3 % of CaO2 and 63.4 % of Fe2+ alone addition. It can be reasonably proposed that the addition of CaO2-Fe2+ may provide an efficacious and cost-effective method for the mitigation of sulfide in sewer systems.

Aluminum ion catalyzed proton transfer: Mechanism on promoting highly stable passivation of Cr by soil organic matter

Although biochar can passivate chromium (Cr3+) in soil, the low stability is still a challenge to be overcome since the passivation mechanism is dominated by weak interactions (complexation, electrostatic attraction, etc.). In this study, a highly stable passivation of Cr3+ was achieved in soil based on the strategy that the low-energy sp hybridisation orbitals of aluminum (Al3+) induced a decrease in the HOMO energy level, leading to the enrichment of off-domain electrons in carbon-based conjugated systems. It can promote the proton transfer and the ion exchange, facilitating the strong chemical binding of organic matter to Cr3+. It suggested that the introduction of Al3+ significantly enhanced the passivation efficiency, maintaining a growth over 42 days of aging. To achieving a high stable passivation, the key is promoting a higher proportion of organic matter-bound Cr3+ contributing by the introduction of Al3+. DFT calculations further validated thermodynamically that, only Al3+ had the catalytic effect on both proton transfer and Cr3+ passivation compared with K+, Na+, Ca2+, Mg2+, Fe3+, Zr4+. These findings can provide important insights for developing a new generation of passivators which can efficiently stabilize heavy metal.

Enhanced aerobic bioremediation of an aquifer heavily contaminated with a mixture of chlorobenzenes and hexachlorocyclohexanes at the Sardas landfill (Spain)

The groundwater at the Sardas landfill in Huesca, Spain, is contaminated with benzene, chlorobenzenes, and hexachlorocyclohexane (HCH) isomers due to illegal waste dumping from a former lindane factory. In this study, microcosms using field-derived groundwater to evaluate in situ bioremediation were constructed. Anaerobic biostimulation with lactate successfully transformed α-, β-, δ-, and γ-HCH within two weeks, but failed to degrade benzene and less chlorinated benzenes, even with nutrient addition. In contrast, aerobic biostimulation led to rapid degradation of benzene, chlorobenzenes, and α-, δ-, and γ-HCH. Notably, adding a phosphorus source significantly increased the degradation rates. Following these laboratory results, an in situ pilot test using the oxygen-releasing compound CaO2 was conducted at two site injection wells. The field results mirrored those from the microcosms, showing a marked reduction in contaminants at both the injection wells and surrounding wells. Bacterial community analysis based on the 16S rRNA genes in samples derived from aerobic microcosms and groundwater before and after the biostimulation test revealed a marked increase in the genus Pseudomonas, suggesting its potential role as biodegrading agent. This study illustrates the effectiveness of biostimulation as a viable strategy for treating groundwater contaminated with HCH isomers, benzene, and chlorobenzenes.

An in situ reactive zone approach using calcium peroxide for the remediation of benzene and chlorobenzene in groundwater: A field study

There is a gap in understanding the different contributions of biodegradation and free radical oxidation using calcium peroxide (CaO2) for the remediation of mixed contaminants of benzene and chlorobenzene in groundwater. In this study, the remedial efficiency and mechanisms of benzene and chlorobenzene co-contaminants using CaO2 were explored by an integrated approach of field study and laboratory validation. It was found that in the field demonstration program, the radius of influence for each injection point using Geoprobe direct-push was larger than the designed value of 0.75 m in the reactive zones created by CaO2 supplemented with a buffer solution (Area A) and CaO2 only (Area B). Both benzene and chlorobenzene were remediated to meet the cleanup goals within 5 months. The benzene and chlorobenzene concentration rebounds observed in monitoring wells were treated effectively with sustained effect of reagents. The laboratory validation experiments verified CaO2 with a buffer solution could maintain the pH values within the range of 6.05-7.69, and higher DO concentrations for prolonged period. The contributions of biodegradation for benzene were 43.47% and 42.02% in CaO2 group and CaO2 adjusted with buffer solutions group, respectively, while those for chlorobenzene were 16.87% and 19.61%. In addition, it was demonstrated in the laboratory that the application of CaO2 supplemented with a buffer solution had the best remediation efficiency for benzene and chlorobenzene, due to the contributions from both the free radicals HO• and the biodegradation of co-contaminants by the native microbial consortium. Furthermore, the intermediate byproducts, including phenol, 2-chlorophenol and pyruvate, were detected in groundwater collected in the field, and the biodegradation and oxidative degradation pathways of benzene and chlorobenzene with the application of CaO2 were proposed. The microbial composition analyses for groundwater samples revealed that multiple functional bacteria, which are capable of degrading benzene and chlorobenzene, were enriched. The findings of the current study take one step further for the understanding of the fundamentals of CaO2 as a slow oxygen releasing reagent, as well as its engineering applications for the remediation of organic contaminants in soil and groundwater.

Self-cleaning electrode for stable synthesis of alkaline-earth metal peroxides

Alkaline-earth metal peroxides (MO2, M = Ca, Sr, Ba) represent a category of versatile and clean solid oxidizers, while the synthesis process usually consumes excessive hydrogen peroxide (H2O2). Here we discover that H2O2 synthesized via two-electron electrochemical oxygen reduction (2e- ORR) on the electrode surface can be efficiently and durably consumed to produce high-purity MO2 in an alkaline environment. The crucial factor lies in the in-time detachment of in situ-generated MO2 from the self-cleaning electrode, where the solid products spontaneously detach from the electrode to solve the block issue. The self-cleaning electrode is achieved by constructing micro-/nanostructure of a highly active catalyst with appropriate surface modification. In experiments, an unprecedented accumulated selectivity (~99%) and durability (>1,000 h, 50 mA cm-2) are achieved for electrochemical synthesis of MO2. Moreover, the comparability of CaO2 and H2O2 for tetracycline degradation with hydrodynamic cavitation is validated in terms of their close efficacies (degradation efficiency of 87.9% and 93.6% for H2O2 and CaO2, respectively).

Mechanistic insights into the pH-driven radical transformation of the Fe(II)/nCP in groundwater remediation

Calcium peroxide nanoparticles (nCP) as a versatile and safe solid H2O2 source, have attracted significant research interst for their application potential in groundwater remediation. Compared to the traditional Fenton system, the nCP-based Fenton-like system has a wider pH-working window for contaminants degradation. This results from the dominant radical transformation under different pH. Unlike the traditional Fenton system which is only effective in acid conditions with hydroxyl radical (•OH) as the main active species, the release of H2O2 and O2 from nCP provides multiple contaminants degradation pathways. In acidic environments, •OH and Fe(IV) predominate as the active species, facilitated by substantial H2O2 production which activates the Fenton reaction. In neutral or alkaline conditions, the production of H2O2 was dramatically decreased. While the O2 released from nCP can be catalyzed by Fe(II) to form superoxide radical (•O2-), which subsequently generate singlet oxygen (1O2). The formation pathway of •O2- was tracked by O18 isotope labeling experiment. The impact of the water matrix on radical generation in the Fe(II)/nCP Fenton-like system was also studied. This research deepens the understanding of the radical formation mechanisms in nCP-based Fenton-like system, offering insights to support their application in remediating contaminated groundwater.

Enhanced in-situ sediment remediation by calcium peroxide coupled with zero-valent iron: Simultaneous nitrogen removal and phosphorus stabilization

As the potential causes of eutrophication, nitrogen (N) and phosphorus (P) in sediments have received wide attention. However, few of the in-situ sediment remediation methods can achieve simultaneous N removal and P stabilization in sediments. In this study, different impacts on N, P and organic matter (OM) properties of sediments and overlying water with different proportions of calcium peroxide (CaO2) coupling with zero-valent iron (ZVI) were explored through incubation experiments. Compared with CaO2 or ZVI alone, the total nitrogen (TN) removal ratios in the whole system at 0.6 g/kg CaO2 coupled with 40 g/kg ZVI increased by 167.91% and 152.04%, respectively. Due to the enhancement of oxidation, the removal efficiency of OM from sediments increased by 118.51%. Meanwhile, the genera related to denitrification (e.g., Anaerobacillus, Haloplasma, and Clostridium_sensu_stricto_8) were also enriched in this coupling group, which was due to the enhanced decomposition of OM and the electron donation of ZVI. In addition, CaO2 coupled with ZVI stabilized P through chemical precipitation, which converted organic phosphorus (Org-P) into more stable calcium bounded P (Ca-P) in sediments. Hence the coupling effectively increased total P (TP) content in sediments and reduced P concentration in water.

Dietary supplementation with calcium peroxide improves methane mitigation potential of finishing beef cattle

Calcium peroxide (CaO2) offers potential as an anti-methanogenic dietary feed material. The compound has been previously assessed in vitro, with methane (CH4) reductions of > 50% observed. The objective of this study was to assess dietary supplementation of CaO2 at different inclusion levels and physical formats in a finishing beef system on the effects of animal performance, gaseous emissions, rumen fermentation parameters and digestibility. Seventy-two dairy-beef bulls (465 kg; 16 months of age) were randomly allocated to one of four treatments supplemented with CaO2; in a coarse ration (1) CON (0% CaO2), (2) LO (1.35% CaO2), (3) HI (2.25% CaO2), and in a pellet (4) HP (2.25% CaO2) (n = 18). Animals received their respective treatments for a 77 d finishing period, during which DM intake (American Calan Inc., Northwood, NH), average daily gain (ADG), feed efficiency and enteric emissions (GreenFeed emissions monitoring system; C-Lock Inc., Rapid City, SD) were measured. The finishing diet was isonitrogenous and isoenergetic across the four treatment groups, composed of 60:40 grass silage:concentrate. Silage was offered each morning (0900 h), and concentrates were offered twice daily (0800 and 1500 h). Supplementation of CaO2 had no effect on final weight (P = 0.09), ADG (P = 0.22) or feed efficiency (P = 0.13). Regarding DM intake, the HI treatment group consumed in the order of 1 kg less than CON (P < 0.01), while HP did not affect DM intake compared to CON (P = 0.79). Across treatments, DM intake ranged from 8.43 to 9.57 kg/d, equating to 1.6-1.8% of BW. Daily CH4 values for the control were 240 g/d, while CaO2 supplemented diets ranged from 202 to 170 g/d, resulting in daily CH4 reductions of 16, 29 and 27% for LO, HI and HP, respectively, compared to CON (P < 0.0001). Additionally, hydrogen was reduced in CaO2 supplemented animals by 32-36% relative to CON (P < 0.0001), with a simultaneous reduction in volatile fatty acid production (P < 0.01) and an increase in propionate concentration (P < 0.0001). Across all universally accepted CH4 metrics (yield, intensity, production), the dietary inclusion of CaO2 whether at a low or high rate, or indeed, through a coarse ration or pelleted format reduced CH4 in the order of 16-32%. This study also concluded that CaO2 can successfully endure the pelleting process, therefore, improving ease of delivery if implemented at farm level.

Environmental applications and risks of engineered nanomaterials in removing petroleum oil in soil

Oil-contaminated soil posed serious threats to the ecosystems and human health. The unique and tunable properties of engineered nanomaterials (ENMs) enable new technologies for removing and repairing oil-contaminated soil. However, few studies systematically examined the linkage between the change of physicochemical properties and the removal efficiency and environmental functions (e.g., potential risk) of ENMs, which is vital for understanding the ENMs environmental sustainability and utilization as a safety product. Thus, this review briefly summarized the environmental applications of ENMs to removing petroleum oil from complex soil systems: Theoretical and practical fundamentals (e.g., excellent physicochemical properties, environmental stability, controlled release, and recycling technologies), and various ENMs (e.g., iron-based, carbon-based, and metal oxides nanomaterials) remediation case studies. Afterward, this review highlights the removing mechanism (e.g., adsorption, photocatalysis, oxidation/reduction, biodegradation) and the impact factor (e.g., nanomaterials species, natural organic matter, and soil matrix) of ENMs during the remediation process in soil ecosystems. Both positive and negative effects of ENMs on terrestrial organisms have been identified, which are mainly derived from their diverse physicochemical properties. In linking nanotechnology applications for repairing oil-contaminated soil back to the physical and chemical properties of ENMs, this critical review aims to raise the research attention on using ENMs as a fundamental guide or even tool to advance soil treatment technologies.

Waste control by waste: A new approach for antibiotic removal and metal reuse from livestock wastewater using ascorbic acid-enhanced CaO2/Cu(II) system

Aiming at the coexistence of antibiotics and Cu(II) in livestock wastewater, a novelty strategy for the simultaneous removal of antibiotics and Cu ions by in-situ utilization of Cu(II) (i.e., CP/Cu(II) and CP/Cu(II)/ascorbic acid (AA) systems) was proposed. The removal rate of florfenicol (FF) in the CP/Cu(II)/AA system was 6.9 times higher than that of the CP/Cu(II) system. CP/Cu(II)/AA system was also effective in removing antibiotics from real livestock tailwater. Simultaneously, the removal of Cu ions in CP/Cu(II) and CP/Cu(II)/AA systems could reach 54.5 % and 15.7 %, respectively. The added AA could significantly enhance the antibiotics degradation but inhibit the Cu ions removal. HO•, O2•-, Cu(III), and •C-R were detected in the CP/Cu(II)/AA system, in which HO• was confirmed as the predominant contributor for FF degradation, and Cu(III) and •C-R also participated in FF elimination. The role of AA could accelerate HO• production and Cu(I)/Cu(II)/Cu(III) cycle, and form •C-R. The degradation products and pathways of FF in the CP/Cu(II)/AA system were proposed and the toxicity of the degradation products was evaluated by the toxicity analysis software (T.E.S.T). The results of this work suggest that without introducing complex catalysts, the feasibility of in-situ utilization of Cu(II) inherently or artificially introduced in livestock wastewater activating CP for antibiotic degradation and Cu ions removal was verified.

UV-activated calcium peroxide system enables simultaneous organophosphorus degradation, phosphate recovery, and carbon fixation

Advanced oxidation processes are a desirable technology for treatment of contaminants of emerging concern. Nevertheless, conventional advanced oxidation of organophosphorus compounds releases inorganic phosphate, posing downstream concerns related to eutrophication. For this reason, we evaluated the ultraviolet light-activated calcium peroxide (UV/CaO2) system for effective treatment of organophosphorus compounds and concurrent capture of the mineralization products, phosphate. The degradation mechanisms, reaction kinetics, and mineralizations were assessed to determine the overall efficiency and performance of the UV/CaO2 process. Knowledge gaps related to photocatalysis in the UV/CaO2 system were not only addressed, but also leveraged to identify unique advantages for removal of organophosphorus compounds and their degradation products. Experimental results confirmed that the UV/CaO2 system effectively mineralized organophosphorus compounds and recovered inorganic phosphate; additionally, collaborative carbon fixation performance of the system reveals the potential of carbon utilization. These outcomes were facilitated by the alkaline environment generated by CaO2. The recovered solids contained most of the phosphorus and carbon from the parent compounds. Ultimately, these findings provide transformative, new insights into the development and application of advanced oxidation processes that prevent downstream concerns related to mineralization products, especially inorganic phosphorus and carbon.

Attenuation of phenylnaphthenic acids related to oil sands process water using solar activated calcium peroxide: Influence of experimental factors, mechanistic modeling, and toxicity evaluation

Refractory naphthenic acids (NAs) are among the primary toxic compounds in oil sands process water (OSPW), a matrix with a complex chemical composition that poses challenges to its remediation. This study evaluated the effectiveness of calcium peroxide (CaO2) combined with solar radiation (solar/CaO2) as an advanced water treatment process for degrading model NAs (1,2,3,4-tetrahydronaphthalene-2-carboxylic acid, pentanoic acid, and diphenylacetic acid) in synthetic water (STW) and provide preliminary insights in treating real OSPW. Solar light and CaO2 acted synergistically to degrade target NAs in STW (>67 of synergistic factor) following a pseudo-first-order kinetic (R2 ≥ 0.95), with an optimal CaO2 dosage of 0.1 g L-1. Inorganic ions and dissolved organic matter were found to hinder the degradation of NAs by solar/CaO2 treatment; however, the complete degradation of NAs was reached in 6.7 h of treatment. The main degradation mechanism involved the generation of hydroxyl radicals (•OH), which contributed ∼90% to the apparent degradation rate constant (K), followed by H2O2 (4-5%) and 1O2 (0-5%). The tentative transformation pathways of three NAs were proposed, confirming an open-ring reaction and resulting in short-chain fatty acid ions as final products. Furthermore, a reduction in acute microbial toxicity and genotoxic effect was observed in the treated samples, suggesting that solar/CaO2 treatment exhibits high environmental compatibility. Furthermore, the solar/CaO2 system was successfully applied as a preliminary step for real-world applications to remove natural NAs, fluorophore organic compounds, and inorganic components from OSPW, demonstrating the potential use of this technology in the advanced treatment of oil-tailing-derived NAs.

Fabrication of oxygen-releasing dextran microgels by droplet-based microfluidic method

In the tissue engineering field, the supply of oxygen to three-dimensional (3D) tissues is an important aspect to avoid necrosis due to hypoxia. Although oxygen-releasing bulk materials containing calcium peroxide (CaO2, CP) have attracted much attention, micrometer-sized oxygen-releasing soft materials would be advantageous because of their highly controllable structures, which can be applied for cell scaffolds, injectable materials, and bioink components in 3D bioprinting. In this study, oxygen-releasing microgels were fabricated via a droplet-based microfluidic system. Homogeneous, monodisperse and stable oxygen-releasing microgels were obtained by photo-crosslinking of droplets composed of biocompatible dextran modified with methacrylate groups and CP nanoparticles as an oxygen source. We also used our microfluidic system for the in situ amorphous calcium carbonate (CaCO3, ACC) formation on the surface of CP nanoparticles to achieve the controlled release of oxygen from the microgel. Oxygen release from an ACC-CP microgel in a neutral cell culture medium was suppressed because incorporation of CP in the ACC suppressed the reaction with water. Strikingly, stimuli to dissolve ACC such as a weak acidic conditions triggered the oxygen release from microgels loaded with ACC-CP, as the dissolution of CaCO3 allows CP to react. Taken together, applications of this new class of biomaterials for tissue engineering are greatly anticipated. In addition, the developed microfluidic system can be used for a variety of oxygen-releasing microgels by changing the substrates of the hydrogel network.

Fourier Transform Ion Cyclotron Resonance Mass Spectrometry Applications for Metabolomics

Metabolomics is an interdisciplinary field that aims to study all metabolites < 1500 Da that are ubiquitously found within all organisms. Metabolomics is experiencing exponential growth and commonly relies on high-resolution mass spectrometry (HRMS). Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) is a form of HRMS that is particularly well suited for metabolomics research due to its exceptionally high resolution (105-106) and sensitivity with a mass accuracy in parts per billion (ppb). In this regard, FT-ICR-MS can provide valuable insights into the metabolomics analysis of complex biological systems due to unique capabilities such as the easy separation of isobaric and isomeric species, isotopic fine structure analysis, spatial resolution of metabolites in cells and tissues, and a high confidence (<1 ppm mass error) in metabolite identification. Alternatively, the large and complex data sets, long acquisition times, high cost, and limited access mainly through national mass spectrometry facilities may impede the routine adoption of FT-ICR-MS by metabolomics researchers. This review examines recent applications of FT-ICR-MS metabolomics in the search for clinical and non-human biomarkers; for the analysis of food, beverage, and environmental samples; and for the high-resolution imaging of tissues and other biological samples. We provide recent examples of metabolomics studies that highlight the advantages of FT-ICR-MS for the detailed and reliable characterization of the metabolome. Additionally, we offer some practical considerations for implementing FT-ICR-MS into a research program by providing a list of FT-ICR-MS facilities and by identifying different high-throughput interfaces, varieties of sample types, analysis methods (e.g., van Krevelen diagrams, Kendrick mass defect plot, etc.), and sample preparation and handling protocols used in FT-ICR-MS experiments. Overall, FT-ICR-MS holds great promise as a vital research tool for advancing metabolomics investigations.

Different regulation strategies of anaerobic digestion by AC/CaO2 and Fe3O4/CaO2: Reactive oxygen species induction, methanogenic performance, and microbial response

This study examined the combination of activated carbon and magnetite with calcium peroxide in enhancing the anaerobic digestion (AD) performance of food waste (FW). The individual mechanisms of these two approaches were also clarified. The results indicated that AC/CaO2 achieved the highest specific methane yield of 434.4 mL/g VS, followed by Fe3O4/CaO2 (416.9 mL/g VS). Both were significantly higher than other groups (control, AC, Fe3O4, and CaO2 were 330.1, 341.4, 342.8, and 373.2 mL/g VS, respectively). Additionally, compared to Fe3O4/CaO2, AC/CaO2 further increased reactive oxygen species (ROS), thereby enhancing the hydrolytic acidification process. Simultaneously, the higher ROS levels of Fe3O4/CaO2 and AC/CaO2 promoted the formation of microbial aggregates and established a more robust enzymatic defense system and unique damage repair strategy. The research comparatively analyzed the synergistic mechanism of iron-based and carbon-based conductive materials with CaO2, providing new perspectives for optimizing the AD of FW.

Improving water quality and mitigating CH4 and N2O production in urban landscape water simultaneously by optimizing calcium peroxide dosage

Recent studies show that greenhouse gas (GHG) emissions from urban landscape water are significant and cannot be overlooked, underscoring the need to develop effective strategies for mitigating GHG production from global freshwater systems. Calcium peroxide (CaO2) is commonly used as an eco-friendly reagent for controlling eutrophication in water bodies, but whether CaO2 can reduce GHG emissions remains unclear. This study investigated the effects of CaO2 dosage on the production of methane (CH4) and nitrous oxide (N2O) in urban landscape water under anoxic conditions during summer. The findings reveal that CaO2 addition not only improved the physicochemical and organoleptic properties of simulated urban landscape water but also reduced N2O production by inhibiting the activity of denitrifying bacteria across various dosages. Moreover, CaO2 exhibited selective effects on methanogens. Specifically, the abundance of acetoclastic methanogen Methanosaeta and methylotrophic methanogen Candidatus_Methanofastidiosum increased whereas the abundance of the hydrogenotrophic methanogen Methanoregula decreased at low, medium, and high dosages, leading to higher CH4 production at increased CaO2 dosage. A comprehensive multi-objective evaluation indicated that an optimal dosage of 60 g CaO2/m2 achieved 41.21 % and 84.40 % reductions in CH4 and N2O production, respectively, over a 50-day period compared to the control. This paper not only introduces a novel approach for controlling the production of GHGs, such as CH4 and N2O, from urban landscape water but also suggests a methodology for optimizing CaO2 dosage, providing valuable insights for its practical application.

Persulfate activated with calcium peroxide to remediate RAFT soil contaminated with diesel in Arctic northern villages: on-site pilot scale study

A pilot field study was conducted in a Canadian northern village (NV) to assess the remediation efficiency of sodium persulphate (SPS) alkali activated with calcium peroxide (CP) to degrade diesel from Arctic raft soil. A minimum temperature increase in the subsurface due to overall process reactions was required. The projected context of application was imperative to preserve the integrity of the remaining permafrost. The test was performed with two soil columns of 370 L buried in the ground. The columns were contaminated with 7500 mg diesel/kg representative raft soil that was matured for a period of 11 months. The continuous delivery by gravity and the static presence of the oxidizing solution was made over 33 days. During that period, SPS concentration, pH and temperatures, were monitored. SPS was activated prior to its distribution and activation by-products were confined in a surficial tank and under a sludge form. The maturation period resulted in the important natural attenuation of diesel (47%) that occurred in the shallower horizons of the soil profile. About 35% of the diesel remaining after the maturation period was removed by chemical oxidation during the operation period on site. The temperature increase measured during the SPS activation process was not significant while the temperature increase due to diesel degradation by oxidation in the subsurface was evaluated to be below 3°C. The soil columns were not clogged by the by-products as indicated by hydraulic testing before and after oxidizing treatment.

Application of calcium peroxide in promoting resource recovery from municipal sludge: A review

The harmless disposal, resource recovery, and synergistic efficiency reduction of municipal sludge have been the research focuses for the last few years. Calcium peroxide (CaO2) is a multifunctional and safe peroxide that produces an alkaline oxidation environment to promote the fermentation of municipal sludge to produce hydrogen (H2) and volatile fatty acids (VFAs), thus realizing sludge resource recovery. This review outlines the research achievements of CaO2 in sludge resource recovery, improvement of sludge dewaterability, and removal of pollutants from sludge in recent years. Meanwhile, the mechanism of CaO2 and its influencing factors have also been comprehensively summarized. Finally, the future development direction of the application of CaO2 in municipal sludge is prospected. This review would provide theoretical reference for the potential engineering applications of CaO2 in improving sludge treatment in the future.

Combining lanthanum-modified bentonite and calcium peroxide to enhance phosphorus removal from lake sediments

Lanthanum-modified bentonite (LMB) and calcium peroxide (CP) are known for their effective removal phosphorus (P) capacities. The present study aims to investigate the effects of the combined use of LMB and CP（LMB + CP）on the sediment P, dissolved organic matter (DOM) and iron (Fe) concentrations through a 90-day incubation experiment. The combined treatment showed strong removal effects on sediment P and DOM. Indeed, the SRP and DOM concentrations in the 0-10 cm sediment layer decreased following the combined application of LMB and CP by 40.67 and 28.95%, respectively, compared to those of the control group (CK). In contrast, the HCl-P in the 0-5 cm sediment layer increased following the combined treatment by 13.28%. In addition, compared with the single application of LMB, the LMB + CP treatment significantly reduced the soluble Fe (Ⅱ) in the sediment pore water and promoted the oxidation of Fe. Therefore, LMB + CP can enhance the removal of internal P from sediments. The DOM removal and Fe oxidation in sediment pore waters are beneficial for enhancing the adsorption of P by LMB. On the other hand, the single and combined applications of LMB and CP increased the richness of the sediment microbial communities while exhibiting slight effects on their diversity. According to the results of this study, the combined use of LMB and oxidizing materials represents a novel method for treating lakes with high internal phosphorus and DOM loads in sediments.

Physiology, microcystin production, and transcriptomic responses of Microcystis aeruginosa exposed to calcium and magnesium

Calcium ions (Ca2+) and magnesium ions (Mg2+) are pivotal in the community composition and stability of harmful cyanobacteria, yet the physiological and molecular responses remains poorly understood. This study aims to explore these responses in the high microcystin producer Microcystis aeruginosa (M. aeruginosa). Results indicate that the growth of M. aeruginosa is inhibited by Ca2+/Mg2+ exposure (0.5-10 mM), while Fv/Fm photosynthetic parameters and extracellular microcystin-leucine-arginine (MC-LR) concentrations increase. Additionally, MC-LR release is significantly elevated under exposure to Ca2+/Mg2+, posing potential aquatic environmental risks. Transcriptomic analysis reveals downregulation of genes related to cell architecture, membrane transport, and metabolism, while the genes linked to photosynthesis electron transmission and heavy metal-responsive transcriptional regulators are upregulated to adapt to environmental changes. Further analysis reveals that Ca2+ and Mg2+ primarily impact sulfur metabolism and transport of amino acids and mineral within cells. These findings provide insights into M. aeruginosa cells responses to Ca2+ and Mg2+ exposure.

Influencing factors and controlled release kinetics of H2O2 from PVP-coated calcium peroxide NPs for groundwater remediation

Calcium peroxide nanoparticles (nCP) as a versatile and safe solid source of hydrogen peroxide (H2O2) receive substantial attention from researchers as a potential groundwater remediation reagent. In this study, we synthesized polyvinylpyrrolidone-coated calcium peroxide nanoparticles (PVP@nCP-PVP) to control the release rate of H2O2 and modulate pH fluctuation simultaneously. The PVP@nCP-PVP is fully characterized and the H2O2 releasing kinetics and mechanisms are investigated. The H2O2 release longevity of nCP increased with the concentration of controlled release material (CRM) encapsulated shell, while the production of H2O2 decreased inversely. The acidic condition is favorable for increasing H2O2 production by promoting the complex decomposition of nCP. The low temperature prolonged the longevity of nCP and suppressed the competitive side reaction for producing O2. The release of H2O2 is consistent with zero-order reaction kinetics and the release of O2 is consistent with first-order reaction kinetics. At last, different nCP composites were employed to construct a Fenton-like system for the degradation of nitrobenzene (NB). The degradation rate was raised from 57.6% by Fe (II)/nCP to 70.0% and 93.7% by Fe (II)/nCP-PVP and Fe (II)/PVP@nCP-PVP systems, respectively. These findings demonstrate that PVP@nCP-PVP has significant advantages in repairing organically contaminated groundwater. ENVIRONMENTAL IMPLICATION: Groundwater contamination poses a great threat to human health and ecosystems. In-situ chemical oxidation (ISCO) is a widely used groundwater remediation technology. Calcium peroxide (CP) as solid hydrogen peroxide showed merits of low cost and high stability, but the further application was limited due to its violent chemical reaction and short longivity in groundwater . In this work, we prepared polyvinylpyrrolidone-coated controlled release nCP (PVP@nCP-PVP) for modulating the release of H2O2. The investigation of H2O2 release kinetics under various environmental conditions enhances the understanding of the inherent relationship between the H2O2 release performance of controlled-release materials and contamination remediation. The feasibility using macromolecules preparing controlled-release oxidizing agents was confirmed, providing a novel solution for groundwater contamination remediation.

An overview of in situ remediation for groundwater co-contaminated with heavy metals and petroleum hydrocarbons

Groundwater is an important component of water resources. Mixed pollutants comprising heavy metals (HMs) and petroleum hydrocarbons (PHs) from industrial activities can contaminate groundwater through such processes as rainfall infiltration, runoff and discharge, which pose direct threats to human health through the food chain or drinking water. In situ remediation of contaminated groundwater is an important way to improve the quality of a water environment, develop water resources and ensure the safety of drinking water. Bioremediation and permeable reactive barriers (PRBs) were discussed in this paper as they were effective and affordable for in situ remediation of complex contaminated groundwater. In addition, media types, technology combinations and factors for the PRBs were highlighted. Finally, insights and outlooks were presented for in situ remediation technologies for complex groundwater contaminated with HMs and PHs. The selection of an in situ remediation technology should be site specific. The remediation of complex contaminated groundwater can be approached from various perspectives, including the development of economical materials, the production of slow-release and encapsulated materials, and a combination of multiple technologies. This review is expected to provide technical guidance and assistance for in situ remediation of complex contaminated groundwater.

Damage mechanism of calcium peroxide on Microcystis aeruginosa PCC7806 and its potential application

Calcium peroxide (CP) is an oxidizing agent that can gradually release hydrogen peroxide (HP) to achieve selective killing of cyanobacteria in water blooms, and reduce the phosphorus content in the water column. Despite the potential of CP for use in cyanobacterial water bloom disposal, there is a lack of research on the mechanism of oxidative damage on cyanobacterial cells by calcium peroxide. Further studies are required to comprehend the underlying scientific principles and potential risks and benefits of applying this approach to cyanobacteria disposal. In this investigation, we employed varying doses of CP for the treatment of Microcystis aeruginosa (M. aeruginosa), which resulted in the following findings: (1) the HP released from CP can damage the photosystem II of M. aeruginosa, reduce cell photosynthetic pigment content, intensify the degree of membrane lipid peroxidation, and increase the extracellular protein content; (2) CP significantly increased the soluble extracellular polysaccharide (sEPS) and bound extracellular polysaccharide (bEPS) content of cells (p < 0.05), causing the cells to exist as agglomerates and effectively allowing them to flocculate and precipitate, reducing the turbidity of the water body; (3) The increased dose elevated the pH and calcium ions significantly decreased the orthophosphate content, resulting in an increase in extracellular alkaline phosphatase activity, but possibly increasing the total extracellular nitrogen content. These results suggested that CP is an effective chemical algaecide for cyanobacteria, and has the potential to be applied to dispose of cyanobacterial blooms while reducing the phosphorus content of the water column and further inhibiting the growth and proliferation of cells.

The effect of the molecular structure of hydroxypropyl methylcellulose on the states of water, wettability, and swelling properties of cryogels prepared with and without CaO2

Hydroxypropyl methylcellulose (HPMC) belongs to the cellulose ether family that has hydroxyl groups substituted by hydrophobic methyl groups (DS) and hydrophilic hydroxypropyl groups (MS). Herein, the interactions between water molecules and cryogels prepared with HPMC in the presence and absence of a linear nonionic surfactant, as well as CaO₂ microparticles, which react with water producing O₂, were systematically investigated by sorption experiments and Time-Domain Nuclear Magnetic Resonance. Regardless of the DS and MS, most water molecules presented transverse relaxation time t2 typical of intermediate water and a small population of more tightly bound water. HPMC cryogels with the highest DS of 1.9 presented the slowest swelling rate of 0.519 ± 0.053 g_water/(g.s) and the highest contact angle values 85.250^o ± 0.004^o, providing the best conditions for a slow reaction between CaO₂ and water. The presence of surfactant favored hydrophobic interactions that allowed the polar head of the surfactant to be exposed to the medium, resulting in a higher swelling rate and lower contact angle values. The HPMC with the highest MS presented the fastest swelling rate and the lowest contact angle. These findings are relevant for the formulations and reactions, where tuning the swelling kinetics is crucial for the final application.

Eco-friendly oxidation of a reactive textile dye by CaO2: effects of specific independent parameters

Textile wastewater containing dyes poses significant risks to the environment. Advanced oxidation processes (AOPs) effectively eliminate dyes by converting them into harmless substances. However, AOPs have drawbacks such as sludge formation, metal toxicity, and high cost. As an alternative to AOPs, calcium peroxide (CaO2) offers an eco-friendly and potent oxidant for dye removal. Unlike certain AOPs that generate sludge, CaO2 can be directly employed without resulting in sludge formation. This study examines the use of CaO2 for oxidizing Reactive Black 5 (RB5) in textile wastewater without any activator. Various independent factors-pH, CaO2 dosage, temperature, and certain anions-were investigated for their influence on the oxidation process. The effects of these factors on dye oxidation were analyzed using the Multiple Linear Regression Method (MLR). CaO2 dosage was determined to be the most influential parameter for RB5 oxidation, while the optimal pH for oxidation with CaO2 was found to be 10. The study determined that 0.5 g of CaO2 achieved approximately 99% efficiency in oxidizing 100 mg/L of RB5. Additionally, the study revealed that the oxidation process is endothermic, with an activation energy (Ea) and standard enthalpy (ΔH°) for RB5 oxidation by CaO2 determined as 31.135 kJ mol-1 and 110.4 kJ mol-1, respectively. The presence of anions decreased RB5 oxidation, with decreasing effectiveness observed in the order of PO43-, SO42-, HCO3-, Cl-, CO32-, and NO3-. Overall, this research highlights CaO2 as an effective, easy-to-use, eco-friendly, and cost-efficient method for removing RB5 from textile wastewater.

Oxygenated Wound Dressings for Hypoxia Mitigation and Enhanced Wound Healing

Oxygen is a critical factor that can regulate the wound healing processes such as skin cell proliferation, granulation, re-epithelialization, angiogenesis, and tissue regeneration. However, hypoxia, a common occurrence in the wound bed, can impede normal healing processes. To enhance wound healing, oxygenation strategies that could effectively increase wound oxygen levels are effective. The present review summarizes wound healing stages and the role of hypoxia in wound healing and overviews current strategies to incorporate various oxygen delivery or generating materials for wound dressing, including catalase, nanoenzyme, hemoglobin, calcium peroxide, or perfluorocarbon-based materials, in addition to photosynthetic bacteria and hyperbaric oxygen therapy. Mechanism of action, oxygenation efficacy, and potential benefits and drawbacks of these dressings are also discussed. We conclude by highlighting the importance of design optimization in wound dressings to address the clinical needs to improve clinical outcomes.

An In Vitro Study of Local Oxygen Therapy as Adjunctive Antimicrobial Therapeutic Option for Patients with Periodontitis

Periodontitis is a common global disease caused by bacterial dysbiosis leading to tissue destruction, and it is strongly associated with anaerobic bacterial colonization. Therapeutic strategies such as oxygen therapy have been developed to positively influence the dysbiotic microbiota, and the use of oxygen-releasing substances may offer an added benefit of avoiding systemic effects commonly associated with antibiotics taken orally or hyperbaric oxygen therapy. Therefore, the oxygen release of calcium peroxide (CaO₂) was measured using a dissolved oxygen meter, and CaO₂ solutions were prepared by dissolving autoclaved CaO₂ in sterile filtered and deionized water. The effects of CaO₂ on planktonic bacterial growth and metabolic activity, as well as on biofilms of Streptococcus oralis and Porphyromonas gingivalis, were investigated through experiments conducted under anaerobic conditions. The objective of this study was to investigate the potential of CaO₂ as an antimicrobial agent for the treatment of periodontitis. Results showed that CaO₂ selectively inhibited the growth and viability of P. gingivalis (p < 0.001) but had little effect on S. oralis (p < 0.01), indicating that CaO₂ has the potential to selectively affect both planktonic bacteria and mono-species biofilms of P. gingivalis. The results of this study suggest that CaO₂ could be a promising antimicrobial agent with selective activity for the treatment of periodontitis.

Degradation of tetracyclines via calcium peroxide activation by ultrasonic: Roles of reactive species, oxidation mechanism and toxicity evaluation

Tetracyclines (TC) frequently detected in the aqueous environment pose threats to humans and ecosystems. The synergistic technology coupling ultrasound (US) and calcium peroxide (CaO₂) has a great potential to abate TC in wastewater. However, the degradation efficiency and detailed mechanism of TC removal in the US/CaO₂ system is unclear. This work was carried out to assess the performance and mechanism of TC removal in the US/CaO₂ system. The results demonstrated that 99.2% of TC was degraded by the combination of 15 mM CaO₂ with ultrasonic power of 400 W (20 kHz), but only about 30% and 4.5% of TC was removed by CaO₂ (15 mM) or US (400 W) alone process, respectively. Experiments using specific quenchers and electron paramagnetic resonance (EPR) analysis indicated that the generation of hydroxyl radicals (•OH), superoxide radicals (O₂^-•), and single oxygen (¹O₂) in the process, whereas •OH and ¹O₂ were mainly responsible for the degradation of TC. The removal of TC in the US/CaO₂ system has a close relationship with the ultrasonic power, the dosage of CaO₂ and TC, and the initial pH. The degradation pathway of TC in the US/CaO₂ process was proposed based on the detected oxidation products, and it mainly included N,N-dedimethylation, hydroxylation, and ring-opening reactions. The presence of 10 mM common inorganic anions including chloridion (Cl^-), nitrate ion (NO₃^-), sulfate ion (SO₄^2-), and bicarbonate ion (HCO₃^-) showed negligible influences on the removal of TC in the US/CaO₂ system. The US/CaO₂ process could efficiently remove TC in real wastewater. Overall, this work firstly demonstrated that •OH and ¹O₂ mainly contributed to the removal of pollutants in the US/CaO₂ system, which was remarkable for understanding the mechanisms of CaO₂-based oxidation process and its future application.

Arsenic release dynamics of paddy field soil during groundwater irrigation and natural flooding

Irrigation water in rice cultivation significantly affects the arsenic (As) mobilization in the paddy field soil. This research assessed the effect of rainwater (RW) and groundwater (GW) on the dissolution dynamics of arsenic (As) in paddy field soil. Up-flow column flooding experiments were conducted continuously for 80 d with simulated RW and GW to evaluate As dissolution phenomena in actual field conditions. Arsenic dissolution from the soil was lower in GW (309 μg/kg) irrigation than in RW flooding conditions (1086 μg/kg). The redox potential (Eh) of the soil pore water decreased, and pH increased over-irrigation time in both flooding conditions. The dissolution of arsenic (As) and iron (Fe) in the soil pore increased, while the dissolution of manganese (Mn) decreased over flooding time. The release of As in the soil pore water was attributed to the dissolution of Fe-As and Mn-As minerals and microbial reduction of As. Fe-As dissolution ratios in the soil pore water were relatively low and estimated as 0.68 mol/mol and 4.9 mol/mol for RW and GW, respectively. The dissolution of As and Mn dominated in the initial phase (0-40 d) of flooding, while the dissolution of As and Fe dominated in the second phase (40-80 d). The release of As was much lower in GW flooding than in RW flooding conditions. The Presence of Ca, Mg, and Mn in the GW facilitated the reduction of As dissolution by precipitating Ca-As and Mg-As and the oxidizing dissolved Mn in the soil pore water. The findings of this study provide valuable insights into the mechanisms of As release during monsoon flooding and groundwater flooding to assess the potential risks of As contamination in rice grown in paddy field soils.

Impacts of calcium peroxide on phosphorus and tungsten releases from sediments

In this study, CaO₂ was used as a capping material to control the release of Phosphate (P) and tungsten (W) from the sediment due to its oxygen-releasing and oxidative properties. The results revealed significant decreases in SRP and soluble W concentrations after the addition of CaO₂. The mechanisms of P and W adsorption by CaO₂ were mainly chemisorption and ligand exchange mechanisms. In addition, the results showed significant increases in HCl-P and amorphous and poorly crystalline(oxyhydr)oxides bound W after the addition of CaO₂. The highest reduction rates of sediment SRP and soluble W release were 37 and 43%, respectively. Furthermore, CaO₂ can promote the redox of iron (Fe) and manganese (Mn). On the other hand, a significant positive correlation was observed between SRP/soluble W and soluble Fe (II) and between SRP/soluble W and soluble Mn, indicating that the effects of CaO₂ on Fe and Mn redox play a crucial role in controlling P and W releases from sediments. However, the redox of Fe plays a key role in controlling sediment P and W release. Therefore, CaO₂ addition can simultaneously inhibit sediment internal P and W release.

Mitigation of arsenic release by calcium peroxide (CaO2) and rice straw biochar in paddy soil

Biochar has a great potential in the stabilization of soil heavy metals; however, the application can actually enhance the mobility of Arsenic (As) in soil. Here, a biochar-coupled calcium peroxide system was proposed to control the increase in As mobility caused by biochar amendment in paddy soil environment. The capability of rice straw biochar pyrolyzed at 500 °C (RB) and CaO₂ to control As mobility was evaluated by incubation for 91 days. CaO₂ encapsulation was performed for pH control of CaO₂, and As mobility was evaluated using a mixture of RB + CaO₂ powder (CaO₂-p), and RB + CaO₂ bead (CaO₂-b), respectively. The control soil solely and RB alone were included for comparison. The combination of RB with CaO₂ exhibited remarkable performance in controlling As mobility in soil, and As mobility decreased by 40.2% (RB + CaO₂-p) and 58.9% (RB + CaO₂-b) compared to RB alone. The result was due to high dissolved oxygen (6 mg L^-1 in RB + CaO₂-p and RB + CaO₂-b) and calcium concentrations (296.3 mg L^-1 in RB + CaO₂-b); oxygen (O₂) and Ca²⁺ derived from CaO₂ is able to prevent the reductive dissolution and chelate-promoted dissolution of As bound to iron (Fe) oxide by biochar. This study revealed that the simultaneous application of CaO₂ and biochar could be a promising way to mitigate the environmental risk of As.

Sunlight-mediated CaO2 inactivation of pathogen indicator organisms in surface water system: Roles of reactive species, characterization of pathogen inactivation

In the era of the current epidemic, it is urgent to control pathogens in sewage, eliminate the source of infection, and optimize the technology for killing pathogens. Combining calcium peroxide (CaO₂) with sunlight is considered a potentially efficient, economical, and eco-friendly method for pathogen-contaminated water remediation. This paper evaluated the solar activating properties of CaO₂ for inactivating pathogenic indicators and explored the roles of reactive species contributing to pathogen inactivation. Moreover, these reactive species' average steady-state concentrations and second-order reaction rate were tentatively explored, and mechanistic model for photoinactivation were establishment. Pathogen's inactivation was mainly attributed to direct photoinactivation (13∼50%) and exogenous indirect mechanisms with corresponding contributions of reactive species, i.e., OH^- (14∼23%), ¹O₂ (12∼28%), •OH (20∼32%), O₂^•- (12∼16%), and H₂O₂ (6∼11%). Furthermore, cell membrane rupture and DNA damage were observed by transmission electron microscopy (TEM) and agarose gel electrophoresis (AGE) experiments. Among experiments on common aqueous constituents influencing photoinactivation, copper and iron ions were found to promote a pathogen-inactivating ability of the system, while fulvic acids (FA) and humic acid (HA) had the opposite effect. This study revealed the potential of CaO₂/sunlight to inactivate pathogens and laid a foundation for its application in inactivating pathogens in surface water.

Biochar-Dual Oxidant Composite Particles Alleviate the Oxidative Stress of Phenolic Acid on Tomato Seed Germination

Phenolic acid is a well-known allelochemical, but also a pollutant in soil and water impeding crop production. Biochar is a multifunctional material widely used to mitigate the phenolic acids allelopathic effect. However, phenolic acid absorbed by biochar can still be released. In order to improve the removal efficiency of phenolic acids by biochar, the biochar-dual oxidant (BDO) composite particles were synthesized in this study, and the underlying mechanism of the BDO particles in ameliorating p-coumaric acid (p-CA) oxidative damage to tomato seed germination was revealed. Upon p-CA treatment, the BDO composite particles application increased the radical length, radical surface area, and germination index by 95.0%, 52.8%, and 114.6%, respectively. Compared to using biochar or oxidants alone, the BDO particles addition resulted in a higher removal rate of p-CA and produced more O₂^•-, HO^•, SO₄^•- and ¹O₂ radicals via autocatalytic action, suggesting that BDO particles removed phenolic acid by both adsorption and free radical oxidation. The addition of BDO particles maintained the levels of the antioxidant enzyme activity close to the control, and reduced the malondialdehyde and H₂O₂ by 49.7% and 49.5%, compared to the p-CA treatment. Integrative metabolomic and transcriptomic analyses revealed that 14 key metabolites and 62 genes were involved in phenylalanine and linoleic acid metabolism, which increased dramatically under p-CA stress but down-regulated with the addition of BDO particles. This study proved that the use of BDO composite particles could alleviate the oxidative stress of phenolic acid on tomato seeds. The findings will provide unprecedented insights into the application and mechanism of such composite particles as continuous cropping soil conditioners.

Genome-resolved analyses of oligotrophic groundwater microbial communities along phenol pollution in a continuous-flow biodegradation model system

Groundwater pollution is one of the major environmental concerns. The entrance of pollutants into the oligotrophic groundwater ecosystems alters native microbial community structure and metabolism. This study investigated the application of innovative Small Bioreactor Chambers and CaO2 nanoparticles for phenol removal within continuous-flow sand-packed columns for 6 months. Scanning electron microscopy and confocal laser scanning microscopy analysis were conducted to indicate the impact of attached biofilm on sand surfaces in bioremediation columns. Then, the influence of each method on the microbial biodiversity of the column’s groundwater was investigated by next-generation sequencing of the 16S rRNA gene. The results indicated that the simultaneous application of biostimulation and bioaugmentation completely eliminated phenol during the first 42 days. However, 80.2% of phenol remained in the natural bioremediation column at the end of the experiment. Microbial diversity was decreased by CaO2 injection while order-level groups known for phenol degradation such as Rhodobacterales and Xanthomonadales dominated in biostimulation columns. Genome-resolved comparative analyses of oligotrophic groundwater prokaryotic communities revealed that Burkholderiales, Micrococcales, and Cytophagales were the dominant members of the pristine groundwater. Six-month exposure of groundwater to phenol shifted the microbial population towards increasing the heterotrophic members of Desulfobacterales, Pseudomonadales, and Xanthomonadales with the degradation potential of phenol and other hydrocarbons.

Treatment of sewage sludge hydrothermal carbonization aqueous phase by Fe(II)/CaO2 system: Oxidation behaviors and mechanism of organic compounds

The Fe(II)/CaO₂ system with a stable oxidant and a low-cost homogeneous activating agent has been considered as a prospective process for the disposal of wastewater. The system was constructed to treat sewage sludge hydrothermal carbonization aqueous phase (HTC-AP) in this study. As the hydrothermal temperature increased, the organics in the HTC-AP were first decomposed and then cyclized, while the Maillard reaction occurs throughout the stage. The oxidation efficiency of the Fe(II)/CaO₂ system was related to the composition of organics in HTC-AP, and the removal of dissolved organic carbon (DOC) by the system was 38.56 % in the HTC-AP obtained by hydrothermal treatment at 220 °C. Redundancy analysis showed that the low molecular weight organics, hydrophobic acids, and hydrophobic neutral components were beneficial to DOC removal, while Maillard products and cyclization products were hard to be oxidized to CO₂ and H₂O. The CN functional group of the protein facilitated DOC removal, and some organics in HTC-AP were oxidized to acids and phenols. The energy input to remove DOC in Fe(II)/CaO₂ system was 27.74 MJ per kg carbon. This study provides a low-energy consumption Fe(II)/CaO₂ system for the post-treatment of HTC-APs and explores the applicability of the system.

Effective Removal of Glyphosate from Aqueous Systems Using Synthesized PEG-Coated Calcium Peroxide Nanoparticles: Kinetics Study, H2O2 Release Performance and Degradation Pathways

Glyphosate (N-phosphonomethyl glycine) is a non-selective, broad-spectrum organophosphate herbicide. Its omnipresent application with large quantity has made glyphosate as a problematic contaminant in water. Therefore, an effective technology is urgently required to remove glyphosate and its metabolites from water. In this study, calcium peroxide nanoparticles (nCPs) were functioned as an oxidant to produce sufficient hydroxyl free radicals (·OH) with the presence of Fe²⁺ as a catalyst using a Fenton-based system. The nCPs with small particle size (40.88 nm) and high surface area (28.09 m²/g) were successfully synthesized via a co-precipitation method. The synthesized nCPs were characterized using transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD), Brunauer-Emmett-Teller analysis (BET), dynamic light scattering (DLS), and field emission scanning electron microscopy (FESEM) techniques. Under the given conditions (pH = 3.0, initial nCPs dosage = 0.2 g, Ca²⁺/Fe²⁺ molar ratio = 6, the initial glyphosate concentration = 50 mg/L, RT), 99.60% total phosphorus (TP) removal and 75.10% chemical oxygen demand (COD) removal were achieved within 75 min. The degradation process fitted with the Behnajady-Modirshahla-Ghanbery (BMG) kinetics model. The H₂O₂ release performance and proposed degradation pathways were also reported. The results demonstrated that calcium peroxide nanoparticles are an efficient oxidant for glyphosate removal from aqueous systems.

Simultaneous use of nitrate and calcium peroxide to control sulfide and greenhouse gas emission in sewers

The sewer system is a significant source of hydrogen sulfide (H₂S) and greenhouse gases which has attracted extensive interest from researchers. In this study, a novel combined dosing strategy using nitrate and calcium peroxide (CaO₂) was proposed to simultaneously control sulfide and greenhouse gases, and its performance was evaluated in laboratory-scale reactors. Results suggested that the addition of nitrate and CaO₂ improved the effectiveness of sulfide control. And the combination index method further proved that nitrate and CaO₂ were synergistic in controlling sulfide. Meanwhile, the combination of nitrate and CaO₂ substantially reduced greenhouse gas emissions, especially the carbon dioxide (CO₂) and methane (CH₄). The microbial analysis revealed that the combined addition greatly stimulated the accumulation of nitrate reducing-sulfide oxidizing bacteria (NR-SOB) that participate in anoxic nitrate-dependent sulfide oxidation, while the abundance of heterotrophic denitrification bacteria (hNRB) was reduced significantly. Moreover, the presence of oxygen and alkaline chemicals generated by CaO₂ facilitated the inhibition of sulfate-reducing bacteria (SRB) activities. Therefore, the nitrate dosage was diminished significantly. On the other hand, the generated alkaline chemicals promoted CO₂ elimination and inhibited the activities of methanogens, leading to a decrease of CO₂ and CH₄ fluxes, which facilitated elimination of greenhouse effects. The intermittent dosing test showed that the nitrate and CaO₂ could be applied intermittently for sulfide removal. And the chemical cost of intermittent dosing strategy was reduced by 85 % compared to the continuous dosing nitrate strategy. Therefore, intermittent dosing nitrate combined with CaO₂ is probably an effective and economical approach to control sulfide and greenhouse gases in sewer systems.

A novel NiO/BaTiO3 heterojunction for piezocatalytic water purification under ultrasonic vibration

This work designed and prepared a novel heterojunction composite NiO/BaTiO₃ through a method of photodeposition and used it in piezocatalytic dye removal for the first time. Results of the piezocatalytic test indicated that the NiO/BaTiO₃ composite presented superior efficiency and stability in the RhB degradation under the vibration of ultrasonic waves. The best NiO/BaTiO₃ sample synthesized under light irradiation for 2 h displayed an RhB degradation rate of 2.41 h^-1, which was 6.3 times faster than that of pure BaTiO₃. By optimizing the piezocatalytic reaction conditions, the degradation rate constant of NiO/BaTiO₃ can further reach 4.14 h^-1 A variety of systematic characterizations were executed to determine the reason for the excellent piezocatalytic performance of NiO/BaTiO₃. The band potentials of NiO and BaTiO₃ are found to coincide, and at their contact interface, they may create a type-II p-n heterojunction structure. Driven by the potential difference and the built-in electric field, piezoelectrically enriched charge carriers can migrate between NiO and BaTiO₃, resulting in improved efficiency in charge separation and an increase in the piezoelectric catalytic performance. This study may provide a potential composite catalyst and a promising idea for the design of highly efficient catalysts in the field of piezoelectric catalysis.

Sustained oxygen release of hydrogen peroxide-acrylic resin inclusion complex for aquaculture

To overcome the lack of dissolved oxygen in high-density aquaculture water, a hydrogen peroxide-acrylic resin inclusion complex with sustained oxygen releasing effect was designed and prepared. The resin was synthesized by emulsion polymerization of acrylic acid, methyl methacrylate and butyl acrylate in a mass ratio of 2: 3: 5, and neutralized with sodium hydroxide solution by 50%. The resin solution was mixed in a mixture of urea and 30% hydrogen peroxide solution (CO(NH2)2: H2O2, 1: 1, mol: mol), and dried at 40 °C for 4 h to obtain the hydrogen peroxide-acrylic resin inclusion complex. The product with 4.0% resin by mass of hydrogen oxygen solution, could release oxygen for 92 h in pond water. After optimization by adding a small amount of NaCl, Na2SO4, and EDTA, it was mixed with calcium carbonate and magnesium stearate in a mass ratio of 5: 4: 0.9, and pressed into tablets (1.2 × 0.6 cm, 0.99 g). One tablet in 50 L simulated micro ecosystem aquaculture water with 20 of Carassius auratus fish could release oxygen for 116 h and brought fish with 83.3% of survival rate higher than 51.7 and 70.0% of blank and sodium percarbonate groups.

Enhanced biohydrogen generation through calcium peroxide engendered efficient ultrasonic disintegration of waste activated sludge in low temperature environment

Waste activated sludge is a renewable source for biohydrogen production, whereas the presence of complex biopolymers limits the hydrolysis step during this process, and thus pretreatment is required to disintegrate the sludge biomass. In this study, the feasibility of utilizing waste activated sludge to produce biohydrogen by improving the solubilization by means of thermo CaO₂ engendered sonication disintegration (TCP-US) was studied. The optimized condition for extracellular polymeric substance (EPS) dissociation was obtained at the CaO₂ dosage of 0.05 g/g SS at 70 °C. The maximum disintegration after EPS removal was achieved at the sonic specific energy input of 1612.8 kJ/kg TS with the maximum solubilization and SS reduction of 23.7% and 18.14%, respectively, which was higher than the US alone pretreatment. Thus, this solubilization yields higher biohydrogen production of 114.3 mLH₂/gCOD in TCP-US sample.

Mechanistic insights into Fe(II)-citric acid complex catalyzed CaO2 Fenton-like process for enhanced benzo[a]pyrene removal from black-odor sediment at circumneutral pH

Polycyclic aromatic hydrocarbons (PAHs) are found ubiquitously in contaminated aquatic sediments. They are difficult to degrade, particularly the high-molecular-weight PAHs (e.g., benzo[a]pyrene, BaP). In this study, CaO₂ assisted with ferrous ion (Fe(II))-citric acid (CA) was applied for the first time in BaP degradation in aquatic sediment. Among the treatment processes we studied, CaO₂/Fe(Ⅱ)/CA could effectively degrade BaP at circumneutral pH (7.0 ± 0.3), reaching a maximum of nearly 80% under optimal conditions (0.84 mM CaO₂, 0.21 mM Fe(Ⅱ), and 0.35 mM CA in per gram of dry sediment). Contrary to some external environmental factors such as temperature, common metal ions, and natural organic matters, a certain amount of moisture content and inorganic anions (Cl^-, SO₄^2-) exhibited a positive effect on BaP degradation, which can probably be contributed to the improved mass transfer rate in the non-homogeneous sediment-water mixture and a higher level of free radicals. The degradation kinetic dominated by hydroxyl radicals included three main stages contribution ∼29.4%, ∼43.1%, and ∼2.4% to BaP degradation, respectively. Based on the theoretical calculations of density functional theory, a pathway for BaP degradation was proposed. For the treatment of actual contaminated sediment, the CaO₂/Fe(II)/CA process could realize the elimination of black-odor and effective removal of PAHs from the sediment, as well as negligible ecotoxicity on benthic organisms. This study provides a reference and guidance for the use of CaO₂ based Fenton-like systems in treating PAH-contaminated black-odor river sediments.

The mechanism of C-N-S interconnection degradation in organic-rich sediments by Ca(NO3)2 - CaO2 synergistic remediation

The rebound of black-odorous occurred in organic-rich sediments has become a critical issue due to its great harm to the ecological environment. Elements such as S, C, and N play a crucial role in the biogeochemical cycle of black-odorous rivers. As electronic acceptors, Ca(NO₃)₂ and CaO₂ can effectively remove acidified volatile sulfide (AVS) and organic matter to control the black-odorous rebound. However, the remediation mechanisms in organic-rich sediments by Ca(NO₃)₂ and CaO₂ are unclear. The present study explored the mechanism of C-N-S interconnection degradation in organic-rich urban river sediments by adding different ratios and sequences of Ca(NO₃)₂ and CaO₂. The results showed that Ca(NO₃)₂ remediation followed by CaO₂ and the accepted electron ratio 1:1 of Ca(NO₃)₂ to CaO₂ is an effective method for controlling the rebound of black-odorous and reducing the accumulation NO₂^--N. Mainly attributed to that, CaO₂ enhanced the degradation of organic matter by stimulating enzymatic activities in the sediments, which is also the main reason for controlling the rebound of black-odorous. Since CaO₂ releases O₂ and •OH, which inhibit nosZgenes, NO₂^--N accumulates when remedied simultaneously with Ca(NO₃)₂ and CaO₂. Co-occurrence network analysis illustrated that sulfur-driven autotrophic denitrification bacteria, heterotrophic denitrifying bacteria, and sulfate-reducing bacteria interact strongly inside one module, clarifying a solid interaction of C-N-S substances among these bacteria. Our results reveal the C-N-S interconnection degradation mechanism and provide a new perspective on applying biochemical remediation in organic-rich urban river sediments.

Peroxide mediated oxygen delivery in cancer therapy

Hypoxia is a serious obstacle in cancer treatment. The aberrant vascular network as well as the abnormal extracellular matrix arrangement results in formation of a hypoxic regions in tumors which show high resistance to the curing. Hypoxia makes the cancer treatment challengeable via two mechanisms; first and foremost, hypoxia changes the cell metabolism and leads the cells towards an aggressive and metastatic phenotype and second, hypoxia decreases the efficiency of the various cancer treatment modalities. Most of the cancer treatment methods including chemotherapy, radiotherapy, photodynamic therapy, sonodynamic therapy and immunotherapy are negatively affected by the oxygen deprivation. Therefore, the regional oxygenation is requisite to alleviate the negative impacts of the hypoxia on tumor cells and tumor therapy modalities. A great deal of effort has been put forth to resolve the problem of hypoxia in tumors. Peroxides have gained tremendous attention as oxygen generating components in cancer therapy. The concurrent loading of the peroxides and cancer treatment components into a single delivery system can bring about a multipurpose delivery system and substantially encourage the success of the cancer amelioration. In this review, we have tried to after the description of a relation between hypoxia and cancer treatment modalities, discuss the role of peroxides in tumor hyperoxygenation and cancer therapy success. Thereafter, we have summarized a number of vehicles for the delivery of the peroxide alone or in combination with other therapeutic components for cancer treatment.

A flexible visual detection of calcium peroxide in flour employing enhanced catalytic activity of heterogeneous catalysts binary copper trapped silica-layered magnetite nanozyme

Herein, a novel heterogeneous nanozyme with peroxidase (POD)-like activity was conducted to achieve ultrasensitive visual detection of calcium peroxide (CaO2) in flour by the assembly of binary copper-trapped mesoporous silica layer coated magnetite nanoparticles (Fe3O4 @SiO2 @CuO NPs). The prepared nanozymes were characterized using HRTEM, SEM, FT-IR, XRD, DLS, and EIS, which displayed a dispersed core-shell structure with a uniform diameter of approximately 100 nm. The nanozymes exhibited remarkable and stable POD-like activity in a wide range of pH values, incubation temperature, and reaction time, and the optimum catalytic activity was obtained at pH 3.6, 37 °C, and 10 min. The quantification range of CaO2 of this method is 0.1-5 mM with a limit as low as 5.6 × 10-3 mM, and it is not affected by multiple interferences. In conclusion, this detection method is sensitive, stable, low-cost, and simple to operate, so it has broad application prospects in the detection of food additives such as CaO2.

Transient Oxygen Exposure Causes Profound and Lasting Changes to a Benzene-Degrading Methanogenic Community

We investigated the impact of oxygen on a strictly anaerobic, methanogenic benzene-degrading enrichment culture derived decades ago from oil-contaminated sediment. The culture includes a benzene fermenter from Deltaproteobacteria candidate clade Sva0485 (referred to as ORM2) and methanogenic archaea. A one-time injection of 0.1 mL air , simulating a small leak into 30 mL batch culture bottle, had no measurable impact on benzene degradation rates, although retrospectively, a tiny enrichment of aerobic taxa was detected. A subsequent 100 times larger injection of air stalled methanogenesis and caused drastic perturbation of the microbial community. A benzene-degrading Pseudomonas became highly enriched and consumed all available oxygen. Anaerobic benzene-degrading ORM2 cell numbers plummeted during this time; re-growth and associated recovery of methanogenic benzene degradation took almost 1 year. These results highlight the oxygen sensitivity of this methanogenic culture and confirm that the mechanism for anaerobic biotransformation of benzene is independent of oxygen, fundamentally different from established aerobic pathways, and is carried out by distinct microbial communities. The study also highlights the importance of including microbial decay in characterizing and modeling mixed microbial communities.