Magnetically separable sulfur-doped SnFe2O4/graphene nanohybrids for effective photocatalytic purification of wastewater under visible light

g-C3N4/graphene oxide/SnFe2O4 ternary composite for the effective sunlight-driven photocatalytic degradation of methylene blue

A broadly used dye, methylene blue (MB), adversely impacts human health and water resources, which triggers efficient methods for its elimination. Semiconductor-based heterogeneous photocatalysis is an environmentally friendly approach that effectively degrades organic pollutants. The purpose of the current work is to elucidate and validate the application of a promising g-C3N4/GO/SnFe2O4 (CGS) composite for the environmental remediation of methylene blue dye. The ternary CGS composite has been synthesized using a solvothermal approach. The fabricated composites were analyzed through FTIR, XRD, SEM/EDX, UV-VIS spectroscopy, TEM, and XPS. The photoactivity of composites and affecting parameters (pH, H2O2 dosage, composite amount, initial dye concentration, and irradiation time) were observed in sunlight illumination. The optimal conditions for photocatalytic degradation were pH = 5, photocatalyst dosage = 30 mg/100 mL, H2O2 dosage = 6 mM, and initial dye concentration (IDC) of 10 ppm employing ternary CGS composite, and MB dye was degraded effectively within 1 h. Ninety-eight percent degradation efficacy was attained by employing ternary CGS composite under the optimized conditions. Scavenging analysis suggested that •OH radicals were the key reactive oxygen species (ROS) responsible for the photodegradation of MB dye. Furthermore, the CGS nanocomposite exhibited outstanding recyclability of 84% after five consecutive runs, demonstrating its potential for use in practical applications, particularly pollutant removal.

A novel magnetic AgVO3/rGO/CuFe2O4 hybrid catalyst for efficient hydrogen evolution and photocatalytic degradation

A superior semiconductor material with efficient charge separation and easy reuse could be a promising route for efficient photocatalytic hydrogen evolution and pollutant degradation. AgVO₃ is one of the best visible light active materials which has attracted much attention for several biological and environmental applications. In the aim of enhancing its stability and recyclability a novel AgVO₃/rGO/CuFe₂O₄ heterojunction was prepared by hydrothermal method for hydrogen generation (H₂) and 4-nitrophenol (4-NP) degradation as well. The composite was well characterized by XRD, SEM, HR-TEM, XPS and VSM. The morphological images suggested the rod shaped AgVO₃ and irregular shaped CuFe₂O₄ are unevenly distributed on reduced graphene oxide (rGO) layers. The hydrogen evolution results indicated that the composite showed around 8.937 mmol g^-1h^-1 of H₂ generation which was ∼2.3 times and ∼9.2 times higher than pure AgVO₃ (3.895 mmol g^-1h^-1) and CuFe₂O₄ (0.96 mmol g^-1h^-1) respectively. The 4-NP degradation efficiency of the prepared composite was observed as 94.7% (k = 0.01841 min^-1) which is much higher than the AgVO₃ (66.3%) and CuFe₂O₄ (38.2%) after 4 h of irradiation. The higher efficiency could be attributed to the heterojunction formation and faster charge separation. The radical trapping results indicated that the •OH, O₂•- and photogenerated h⁺ are the main species responsible for efficient activity. The AgVO₃/rGO/CuFe₂O₄ heterojunction showed 49.6 emu/g of saturation magnetization and confirms that it could be easily separated with an external magnet, and showed 85.3% of degradation efficiency even after 6 recycles which indicated its higher stability and recyclability. Thus, our study provides new insight into hydrogen generation and phenol degradation using AgVO₃ based recyclable composites.

Cation Incorporation and Synergistic Effects on the Characteristics of Sulfur-Doped Manganese Ferrites S@Mn(Fe2O4) Nanoparticles for Boosted Sunlight-Driven Photocatalysis

In the present work, sulfur-doped manganese ferrites S@Mn(Fe₂O₄) nanoparticles were prepared by using the sol-gel and citrate method. The concentration of sulfur varied from 1 to 7% by adding Na₂S. The samples were characterized by performing Fourier Transformed Infrared Spectroscopy (FTIR), Energy Dispersive X-ray (EDX), X-ray diffraction (XRD), Scanning Electron Microscopy (SEM) and Ultraviolet-Visible spectroscopy (UV-Visible). The synthesized sulfur-doped manganese ferrites were applied to evaluate the photocatalytic degradation of the dyes. Further, the degradation studies revealed that the nanoparticles successfully degraded the methylene blue dye by adding a 0.006 g dose under the sunlight. The sulfur-doped manganese ferrite nanoparticles containing 3% sulfur completely degraded the dye in 2 h and 15 min in aqueous medium. Thus, the ferrite nanoparticles were found to be promising photocatalyst materials and could be employed for the degradation of other dyes in the future.

Hierarchical Nanoflowers of MgFe2O4, Bentonite and B-,P- Co-Doped Graphene Oxide as Adsorbent and Photocatalyst: Optimization of Parameters by Box–Behnken Methodology

In the present study, nanocomposites having hierarchical nanoflowers (HNFs) -like morphology were synthesized by ultra-sonication approach. HNFs were ternary composite of MgFe₂O₄ and bentonite with boron-, phosphorous- co-doped graphene oxide (BPGO). The HNFs were fully characterized using different analytical tools viz. X-ray photoelectron spectroscopy, scanning electron microscopy, energy dispersion spectroscopy, transmission electron microscopy, X-ray diffraction, vibrating sample magnetometry and Mössbauer analysis. Transmission electron micrographs showed that chiffon-like BPGO nanosheets were wrapped on the MgFe₂O₄-bentonite surface, resulting in a porous flower-like morphology. The red-shift in XPS binding energies of HNFs as compared to MgFe₂O₄-bentoniteand BPGO revealed the presence of strong interactions between the two materials. Box–Behnken statistical methodology was employed to optimize adsorptive and photocatalytic parameters using Pb(II) and malathion as model pollutants, respectively. HNFs exhibited excellent adsorption ability for Pb(II) ions, with the Langmuir adsorption capacity of 654 mg g⁻¹ at optimized pH 6.0 and 96% photocatalytic degradation of malathion at pH 9.0 as compared to MgFe₂O₄-bentonite and BPGO. Results obtained in this study clearly indicate that HNFs are promising nanocomposite for the removal of inorganic and organic contaminants from the aqueous solutions.

Photocatalytic degradation of amoxicillin and tetracycline by template synthesized nano-structured Ce3+@TiO2 thin film catalyst

Contamination of the aquatic environment with pharmaceutical compounds is a serious environmental concern. The present investigation aims to utilize the Ce³⁺/TiO₂ thin film catalyst to remove of potential antibiotics (amoxicillin and tetracycline) using the less harmful UV-A radiations. Reduced cerium ion-doped TiO₂ is obtained by a simple one-step facile template method using polyethylene glycol as the templating agent. The synthesized catalysts Ce³⁺@TiO₂ (non-template) and Ce³⁺@TiO₂(T) (template) were characterized by spectroscopic methods. The XPS reaffirms the reduced Ce³⁺ dispersed within the titania network, and the AFM showed the surface roughness of the thin films. Detailed physicochemical analyses were conducted to deduce the degradation mechanism, and repeated use of the thin film photocatalyst showed enhanced stability. Significant mineralization of the antibiotics indicates the potential applicability of the photocatalytic catalyst. Furthermore, the presence of Ce³⁺ significantly restricted the recombination of electron/hole pairs in the photo-excited TiO₂ semiconductor and showed enhanced photocatalytic degradation of the antibiotics proceeded predominantly through the •OH.

Instructive analysis of engineered carbon materials for potential application in water and wastewater treatment

Water remediation is an essential component for sustainable development. Increasing population and rapid industrialization have contributed to the deterioration of water resources. In particular, effluents from chemical, pharmaceutical, petroleum industries, and anthropogenic activities have led to severe ecological degradation. Many of these detrimental pollutants are highly toxic even at low concentrations, acting as carcinogens and inflicting severe long-lasting effects on human health. This review underscores the potential applications of engineered carbon-based materials for effective wastewater treatment. It focuses on the performance as well as efficiency of activated carbon, graphene nanomaterial, and carbon nanotubes, both with and without chemical functionalization. Plausible mechanisms of action between the chemically functionalized adsorbent and pollutants are also discussed. Based on the keywords from the literature published in the recent five years, a statistical practicality-vs-applicability analysis of these three materials is also provided. The review will provide a deep understanding of the physical or chemical interactions of the wastewater pollutants with carbon materials.

Novel magnetically separable tetrahedral Ag3PO4/NrGO/CuFe2O4 photocatalyst for efficient detoxification of 2,4-dichlorophenol

An effective as well as eco-friendly photodegradation methods by atoxic and easily reusable photocatalysts are essential for wastewater treatment. Silver phosphate (Ag₃PO₄) specifically in tetrahedral shape is one of the superior catalysts under visible light but its photocorrosion, poor electron transfer ability and low surface adsorption properties limits its applications. Combination of Ag₃PO₄ and nitrogen doped reduced graphene oxide (NrGO) having higher in surface area, ample functional groups and hetero atom doping is expected to get over the problem. Further addition of a spinel ferrite (CuFe₂O₄) could enhance the visible light response activity and helps in easy separation of catalyst for reuse. Given the merits of Ag₃PO₄, NrGO and CuFe₂O₄ we rationally integrated a novel magnetically separable stable Ag₃PO₄/NrGO/CuFe₂O₄ photocatalyst for efficient detoxification of 2,4-dichlorophenol (2,4-DCP). About 95.3% degradation efficiency was achieved by Ag₃PO₄/NrGO/CuFe₂O₄ (k = 0.01978 min^-1) which was ~2.6 times higher than pure Ag₃PO₄ (k = 0.00747 min^-1) in 60 min of visible light irradiation. The Ag₃PO₄/NrGO/CuFe₂O₄ heterojunction was able to separate and recycle easily using an external magnetic field due to its strong magnetism, and after 5 recycles it showed 88.6% of degradation efficiency revealed its higher stability and recyclability. The photocatalytic mechanism of Ag₃PO₄/NrGO/CuFe₂O₄ was explained by heterojunction energy-band theory. In addition, the plausible intermediate products of 2,4-dichlorophenol were analyzed by ESI/LC-MS and proposed the pathway. Moreover, the phytotoxicity was also studied on V. radiata in which GI (germination index) was found to be 11.97% before degradation, while 80.31% of GI was observed in 60 min of degradation which revealed that more significant reduction in toxicity was attained on this photodegradation.

Magnetic Nanoparticle Composites: Synergistic Effects and Applications

Composite materials are made from two or more constituent materials with distinct physical or chemical properties that, when combined, produce a material with characteristics which are at least to some degree different from its individual components. Nanocomposite materials are composed of different materials of which at least one has nanoscale dimensions. Common types of nanocomposites consist of a combination of two different elements, with a nanoparticle that is linked to, or surrounded by, another organic or inorganic material, for example in a core-shell or heterostructure configuration. A general family of nanoparticle composites concerns the coating of a nanoscale material by a polymer, SiO2 or carbon. Other materials, such as graphene or graphene oxide (GO), are used as supports forming composites when nanoscale materials are deposited onto them. In this Review we focus on magnetic nanocomposites, describing their synthetic methods, physical properties and applications. Several types of nanocomposites are presented, according to their composition, morphology or surface functionalization. Their applications are largely due to the synergistic effects that appear thanks to the co-existence of two different materials and to their interface, resulting in properties often better than those of their single-phase components. Applications discussed concern magnetically separable catalysts, water treatment, diagnostics-sensing and biomedicine.

Recent advances in photodegradation of antibiotic residues in water

Antibiotics are widely present in the environment due to their extensive and long-term use in modern medicine. The presence and dispersal of these compounds in the environment lead to the dissemination of antibiotic residues, thereby seriously threatening human and ecosystem health. Thus, the effective management of antibiotic residues in water and the practical applications of the management methods are long-term matters of contention among academics. Particularly, photocatalysis has attracted extensive interest as it enables the treatment of antibiotic residues in an eco-friendly manner. Considerable progress has been achieved in the implementation of photocatalytic treatment of antibiotic residues in the past few years. Therefore, this review provides a comprehensive overview of the recent developments on this important topic. This review primarily focuses on the application of photocatalysis as a promising solution for the efficient decomposition of antibiotic residues in water. Particular emphasis was laid on improvement and modification strategies, such as augmented light harvesting, improved charge separation, and strengthened interface interaction, all of which enable the design of powerful photocatalysts to enhance the photocatalytic removal of antibiotics.

New insights in photocatalytic removal of Alizarin Yellow using reduced Ce3+/TiO2 catalyst

The present communication aims to obtain a novel Ce³⁺/TiO₂ thin film in a single step facile method using the in situ template process. The material was characterized by the XRD (X-ray diffraction), XPS (X-ray photoelectron spectroscopy), TEM (transmission electron microscope), and AFM (atomic force microscope) analyses. The thin film catalyst was intended to introduce in the degradation of one of potential dye Alizarin Yellow from aqueous solutions using the UV-A radiations. The mechanisms of degradation along with the physicochemical parametric studies were conducted extensively. The mineralization of pollutant and the replicate use of catalysts further enhance the applicability of present communication. Additionally, the real matrix treatment was conducted to simulate the treatment process.

Silver-Decorated Cobalt Ferrite Nanoparticles Anchored onto the Graphene Sheets as Electrode Materials for Electrochemical and Photocatalytic Applications

The present work describes the synthesis of Ag-CoFe₂O₄/rGO nanocomposite as a photocatalyst through the hydrothermal process by the attachment of silver and cobalt ferrite (CoFe₂O₄) nanoparticles on the surface of reduced graphene oxide. The effect of Ag and reduced graphene oxide (rGO) on the structure, optical, magnetic, photocatalytic, and electrochemical performance of the CoFe₂O₄ is systematically explored through various analytical techniques. The analyses of the observed outcomes reveal that the graphene sheets are exfoliated and decorated with well-dispersed Ag and CoFe₂O₄ nanoparticles. UV-vis spectra indicate a gradual shift in the absorption edge toward the higher wavelength with the addition of Ag ions, which signifies variation in the energy gap of the samples. Photoluminescence results divulge that graphene can decline the electron-hole recombination rate and improve the photocatalytic activity of the Ag-CoFe₂O₄/rGO nanocomposite. In this context, the Ag-CoFe₂O₄/rGO sample presents good catalytic activity as compared to the CoFe₂O₄ and Ag-CoFe₂O₄ photocatalysts for the degradation of methylene blue (MB) dye and suggests that the rGO plays a vital role in the Ag-CoFe₂O₄/rGO nanocomposite. The deterioration rate of the samples is found to be in the order of CoFe₂O₄(78.03%) < Ag-CoFe₂O₄(83.04%) < Ag-CoFe₂O₄/rGO(93.25%) in 100 min for MB dye, respectively, under visible-light irradiation. The room-temperature ferromagnetic behavior of the samples is confirmed by the M-H hysteresis loop measurements. Overall, the Ag-CoFe₂O₄/rGO nanocomposite promises to be a strong magnetic photocatalyst for contaminated wastewater treatment. The electrochemical performance of all of the samples was examined by the cyclic voltammetry (CV) that exhibits a superior rate performance and cycle stability of the Ag-CoFe₂O₄/rGO nanocomposite as compared to the other samples.

Synthesis and characterization of Ag0(NPs)/TiO2 nanocomposite: insight studies of triclosan removal from aqueous solutions

Nanocomposite mesoporous Ag⁰(NPs)/TiO₂ thin film materials were synthesized and assessed for its efficient application in the elimination of potentially important drug triclosan from aqueous solutions. A template synthesis using the polyethylene glycol was enabled to obtain Ag⁰(NPs)/TiO₂ nanocomposite materials where zerovalent Ag was in situ doped to the titania network. The nanocomposite materials were characterized by the scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX), transmission electron microscope (TEM), EDX elemental mapping, X-ray diffraction (XRD) analyses and Brunauer-Emmett-Teller (BET) methods. Further, the diffuse reflectance spectroscopy (DRS) was introduced to estimate the band gap of these solids. The thin film materials were subjected to the remediation of water contaminated with triclosan using the UV-A light. The oxidative elimination of triclosan was demonstrated as a function of pH, concentration of triclosan and presence of several co-existing ions. Increase in pH (4.0-10.0) and triclosan concentrations (0.5-15.0 mg/L) had decreased significantly the percentage degradation of triclosan. The pseudo-first-order kinetics was shown in the degradation of triclosan and rate constant was significantly decreased with the increase in pollutant concentration (0.5-15.0 mg/L) and pH (4.0-10.0). The 1000 times presence of scavengers showed that ^•OH were, predominantly, caused the oxidation of triclosan. Moreover, multiple application of nanocomposite Ag⁰(NPs)/TiO₂(B) revealed that the thin film was fairly intact since the photocatalytic efficiency of triclosan removal was almost unaffected.

Benign zinc oxide betaine-modified biochar nanocomposites for phosphate removal from aqueous solutions

Phosphate is one of the most costly and complex environmental pollutants that leads to eutrophication, which decreases water quality and access to clean water. Among different adsorbents, biochar is one of the promising adsorbents for phosphate removal as well as heavy metal removal from an aqueous solution. In this study, biochar was impregnated with nano zinc oxide in the presence of glycine betaine. The Zinc Oxide Betaine-Modified Biochar Nanocomposites (ZnOBBNC) proved to be an excellent adsorbent for the removal of phosphate, exhibiting a maximum adsorption capacity of phosphate (265.5 mg. g^-1) and fast adsorption kinetics (~100% removal at 15 min at 10 mg. L^-1 phosphate and 3 g. L^-1 nanocomposite dosage) in phosphate solution. The synthesis of these benign ZnOBBNC involves a process that is eco-friendly and economically feasible. From material characterization, we found that the ZnOBBNC has ~20-30 nm particle size, high surface area (100.01 m². g^-1), microporous (25.79 Å) structures, and 7.64% zinc content. The influence of pH (2-10), coexisting anions (Cl^-, CO₃^2-, NO₃^- and SO₄^3-), initial phosphate concentration (10-500 mg. L^-1), and ZnOBBNC dosage (0.5-5 g. L^-1) were investigated in batch experiments. From the adsorption isotherms data, the adsorption of phosphate using ZnOBBNC followed Langmuir isotherm (R² = 0.9616), confirming the mono-layered adsorption mechanism. The kinetic studies showed that the phosphate adsorption using ZnOBBNC followed the pseudo-second-order model (R² = 1.0000), confirming the chemisorption adsorption mechanism with inner-sphere complexion. Our results demonstrated ZnOBBNC as a suitable, competitive candidate for phosphate removal from both mock lab-prepared and real field-collected wastewater samples when compared to commercial nanocomposites.

In-situ synthesis of rGO-ZnO nanocomposite for demonstration of sunlight driven enhanced photocatalytic and self-cleaning of organic dyes and tea stains of cotton fabrics

Recently, research activities are focused on development of 2D reduced graphene oxide (rGO) based semiconductor nanocomposite materials for boosting up its catalytic applications. In this work, a rarely reported green synthesis approach has been envisioned to synthesize in-situ 2D rGO-ZnO (rGZn) nanocomposites from Apple juice and zinc acetate. Also the composition of the samples has been optimized to achieve high photocatalytic and self-cleaning properties by the formation of reactive oxidation species. The samples are characterized for their microstructural, optical absorption and photoluminescence properties. It has been tested that rGZn nanocomposites are capable of removing a test dye, namely methylene blue (MB) from water and achieved the highest dye degradation efficiency of ∼91% within only 60 min under UV-vis light irradiation. A smart cotton fabric (CF) coated with rGZn has been prepared and demonstrated its photocatalytic self-cleaning property by degradation of MB, rhodamine B dyes and tea stains on it even under sunlight irradiation, which is scarcely available in the literature. Therefore, this work may open a new avenue of research for low cost and easy synthesis of rGO-semiconductor nanocomposites with high photocatalytic properties for industrial applications as well as for development of rGO based smart fabric for real-life applications.

Facile synthesis of a novel magnesium amino-tris-(methylenephosphonate)-reduced graphene oxide hybrid and its high performance in mechanical strength, thermal stability, smoke suppression and flame retardancy in phenolic foam

This study presents a one-step synthesis of a magnesium amino-tris-(methylenephosphonate) (Mg-AMP)-reduced graphene oxide (Mg-rGO) hybrid involving graphene oxide (GO) reduction and growth in situ of Mg-AMP nanoparticles in the absence of a reducing agent. Mg-rGO was characterized by X-ray diffraction, X-ray photoelectron and Fourier-transform infrared spectroscopies, transmission electronic microscopy, and thermogravimetric analysis (TGA). Mg-rGO was then used to prepare flame-retardant and toughened phenolic (PF) foam. This additive was found to enhance the compressive and flexural strengths of PF foam as well as to reduce its high friability and brittleness. The limiting oxygen index of the foam with 4 phr Mg-rGO (sample PF/4Mg-rGO) increased to 41.5%, compared with the 38% of untreated foam; the peak heat release rate and total heat release of sample PF/4Mg-rGO were decreased by 28.7 and 18.4%, respectively. Also, the total smoke release and peak CO production rate of PF/4Mg-rGO were reduced by 52.5 and 38.1%, respectively. TGA results indicated that Mg-rGO clearly improved the thermal stability of PF foam.

Nanocomposite Au NP/TiO2 thin film in the efficient remediation of aqueous solutions contaminated with emerging micro-pollutants

The present communication specifically aims to synthesize novel nanocomposite material Au NPs/TiO₂ in a simple template process using the polyethylene glycol as filler media. The thin film of the nanocomposite material was characterized by the advanced analytical tools. The surface morphology was obtained by the scanning electron microscopic (SEM) and transmission electron microscopic (TEM) images of solids. Similarly, the surface topography and roughness of solid were obtained by the atomic force microscopic (AFM) image of thin film. X-ray diffraction (XRD) data enabled to confirm that the TiO₂ was predominantly present with its anatase phase. The specific surface area and pore size of the solid were obtained using the N₂ adsorption/desorption data. Nanocomposite Au NP/TiO₂ thin film was employed in the photocatalytic removal of sulfamethoxazole and triclosan from aqueous solutions using less harmful UV-A light (λ_max = 330 nm). Various physicochemical parametric studies enabled to deduce the mechanism involved in the degradation process. The degradation kinetics as a function of pH (pH 4.0-10.0) and micro-pollutant concentrations (0.5-15.0 mg/L) was extensively studied. The mineralization of these pollutants was obtained using the non-purgeable organic carbon (NPOC) data. The stability of thin film was assessed by the repeated operations, and presence of several co-existing ions simulates the studies to real matrix treatment. Further, the presence of scavengers enabled to pin point the radical-induced degradation of sulfamethoxazole and triclosan from aqueous solutions.

Synthesis, characterization and synergistic photocatalytic properties of yeast-assisted composite La0.7Sr0.3MnO3/TiO2

A magnetic yeast-assisted composite Y-La_0.7Sr_0.3MnO₃/TiO₂with p–n heterojunction was prepared. And it shows an obvious synergistic photocatalytic effect on methyl orange (MO) wastewater under solar irradiation.