Fabrication of magnetic lignosulfonate using ultrasonic-assisted in situ synthesis for efficient removal of Cr(Ⅵ) and Rhodamine B from wastewater

Synthesis of magnetic MFe2O4 (M = Ni, Co, Zn, Fe) supported on porous carbons derived from Bidens pilosa weed and their adsorptive comparison of toxic dyes

Bidens pilosa is classified as an invasive plant and has become a problematic weed to many agricultural crops. This species strongly germinates, grows and reproduces and competing for nutrients with local plants. To lessen the influence of Bidens pilosa, therefore, converting this harmful species into carbon materials as adsorbents in harm-to-wealth and valorization strategies is required. Here, we synthesized a series of magnetic composites based on MFe2O4 (M = Ni, Co, Zn, Fe) supported on porous carbon (MFOAC) derived from Bidens pilosa by a facile hydrothermal method. The Bidens pilosa carbon was initially activated by condensed H3PO4 to increase the surface chemistry. We observed that porous carbon loaded NiFe2O4 (NFOAC) reached the highest surface area (795.7 m2 g-1), followed by CoFe2O4/AC (449.1 m2 g-1), Fe3O4/AC (426.1 m2 g-1), ZnFe2O4/AC (409.5 m2 g-1). Morphological results showed nanoparticles were well-dispersed on the surface of carbon. RhB, MO, and MR dyes were used as adsorbate to test the adsorption by MFOAC. Effect of time (0-360 min), concentration (5-50 mg L-1), dosage (0.05-0.2 g L-1), and pH (3-9) on dyes adsorption onto MFOAC was investigated. It was found that NFOAC obtained the highest maximum adsorption capacity against dyes, RhB (107.96 mg g-1) < MO (148.05 mg g-1) < MR (153.1 mg g-1). Several mechanisms such as H bonding, π-π stacking, cation-π interaction, and electrostatic interaction were suggested. With sufficient stability and capacity, NFOAC can be used as potential adsorbent for real water treatment systems.

Removal of dyes from wastewater using Eucalyptus wood fiber loaded nanoscale zero-valent iron: Characterization and removal mechanism

Wood fiber as a natural and renewable material has low cost and plenty of functional groups, which owns the ability to adsorb dyes. In order to improve the application performance of wood fiber in dye-pollution wastewater, Eucalyptus wood fiber loaded nanoscale zero-valent iron (EWF-nZVI) was developed to give EWF magnetism and the ability to degrade dyes. EWF-nZVI was characterized via FTIR, XRD, zeta potential, VSM, SEM-EDS and XPS. Results showed that EWF-nZVI owned a strong magnetism of 96.51 emu/g. The dye removal process of EWF-nZVI was more in line with the pseudo-second-order kinetics model. In addition, the Langmuir isotherm model fitting results showed that the maximum removal capacities of Congo red and Rhodamine B by EWF-nZVI were 714.29 mg/g and 68.49 mg/g at 328 K, respectively. After five adsorption-desorption cycles, the regeneration efficiencies of Congo red and Rhodamine B were 74 % and 42 % in turn. The dye removal mechanisms of EWF-nZVI included redox degradation (Congo red and Rhodamine B) and electrostatic adsorption (Congo red). In summary, EWF-nZVI is a promising biomass-based material with high dye removal capacities. This work is beneficial to promote the large-scale application of wood fiber in water treatment.

Efficient removal of Rhodamine B dye using biochar as an adsorbent: Study the performance, kinetics, thermodynamics, adsorption isotherms and its reusability

Removal of toxic dyes such as Rhodamine B is essential as it pollutes aqueous and soil streams as well. This comprehensive study explores the potential of Calophyllum inophyllum seed char as an efficient bio-adsorbent based on their characteristic properties and a comparative study between various carbon-based adsorbents on the adsorption capacity of Rhodamine B dye. In this study, the char was prepared from Calophyllum inophyllum seed using a slow pyrolysis process (298 K/min) at an optimum temperature of 823 K and used as an adsorbent for the removal of Rhodamine B from water. The resulting char was mesoporous and had 155.389 m2/g surface areas (BET) and 0.628 cc/g pore volume. The formation of pores was observed from the SEM analysis. The adsorption studies were tested and optimized through various parameters such as solution pH, adsorbent dosage, initial dye concentration, stirring speed, contact time, and solution temperature. Maximum 95.5 % removal of Rhodamine B was possible at the pH: 2, stirring speed: 100 rpm, time: 25 min, temperature 308 K, and dose: 1.2 g/L. The highest adsorption capacity at equilibrium was determined to be 169.5 (mg/g) through Langmuir adsorption isotherm studies and followed pseudo 2nd order kinetics. The thermodynamics study confirmed the adsorption processes were spontaneous (ΔG°=-0.735 kJ/mol) and endothermic (ΔH° = 4.1 kJ/mol) processes. The reusability study confirmed that the mesoporous char can be reused as an efficient adsorbent for up to 3 cycles for environmental remediation.

Preparation of KHA/SA/MMT composites and their adsorption properties for Rhodamine B

Two natural adsorbent materials, potassium humate (KHA) and montmorillonite (MMT), were successfully prepared by embedding them in sodium alginate (SA) gel spheres through physical cross-linking with CaCl2. And CaCO3 was used as a porogenic agent to prepare the porous composites, KHA/SA/MMT. The materials were characterized by using XRD, TGA, SEM, and N2 adsorption/desorption equipment. The results showed that MMT and KHA were successfully embedded in the SA gel; the introduction of MMT increased the thermal stability of the composites and the embedding of MMT, and the porogenic effect of CaCO3 increased the specific surface area of the composites substantially, which provided favorable conditions for adsorption and treatment of pollutants. In addition, a one-way exploratory experiment yielded a higher removal rate of Rhodamine B (RhB) at D = 0.6 g/L, pH = 5, C0 = 100 mg/L, and t = 360 min. The adsorption kinetics and adsorption isotherm conformed to the secondary kinetic model and Langmuir model, respectively, and the maximum adsorption of RhB by KHA/SA/MMT could reach up to 884.96 mg/g at 303 K. The adsorption mechanism for RhB was shown by FT-IR and XPS analyses to be possibly bound by non-covalent bonding forces. After seven consecutive adsorption-desorption cycles, the adsorption of RhB by KHA/SA/MMT still reached 80.75%. Therefore, the prepared gel spheres have the advantages of easy regeneration and efficient reuse and great potential for application in purifying RhB from wastewater.

Advances in lignin-based biosorbents for sustainable wastewater treatment

The heavy metals, pesticides and dyes in agriculture and industry caused serious water pollution have increased the urgency for the advancement of biomass-based adsorbents due to their merits of low cost, high efficiency, and environmental sustainability. Thus, this review systematically examines the recent progress of lignin-based adsorbents dedicated to wastewater purification. Commencing with a succinct exposition on the intricate structure and prevalent forms of lignin, the review proceeds to expound rational design strategies tailored for lignin-based adsorbents coupled with adsorption mechanisms and regeneration methods. Emphasis is placed on the potential industrial applications of lignin-based adsorbents, accentuating their capacity for recovery and direct utilization post-use. The future challenges and outlooks associated with lignin-based adsorbents are discussed to provide novel perspectives for the development of high-performance and sustainable biosorbents, facilitating the effective removal of pollutants and the value-added utilization of resources in a sustainable manner.

Preferential, synergistic sorption and reduction of Cr(VI) from chromium-rhodamine B mixed wastewater by magnetic porous biochar derived from wasted Myriophyllum aquaticum biomass

Eradication of heavy metals and dyes simultaneously from wastewater is urgently needed to safeguard public and environmental health. In this study, magnetic porous biochar derived from wasted Myriophyllum aquaticum (MPMaB) was synthesized by KOH-activation and co-precipitation method to treat chromate and rhodamine B (RhB)-bearing wastewater. The KOH activation significantly improved the pore structure of biochar with a high specific surface area of 937.1 m² g^-1. The sorption performance of MPMaB for Cr(VI) and RhB in single and co-solutes conditions was evaluated. In single system, a pH-dependent sorption pattern for Cr(VI) by MPMaB was revealed and the estimated sorption capability reached 175.4 mg g^-1, whereas the Langmuir-based sorption capacity of RhB was 175.4 mg g^-1 pH-independently. MPMaB partially transformed Cr(VI) to less toxic Cr(III) (approximately 59.3%). Synergistic sorption of Cr(VI) with the coexistence of RhB was observed, where synergistic effect ranged from 119% to 527% depending on pH. For example, the sorption capacity of Cr(VI) on MPMaB, at pH 2, augmented from 175.4 mg g^-1 (single system) to 208.3 mg g^-1 (binary system). Preferential sorption of Cr(VI) was found and was further confirmed by the post-sorption of Cr(VI) (or RhB) by MPMaB pre-sorbed with RhB (or chromate). Chromate sorption mechanisms mainly include electrostatic interactions and complexation, while the sorption of RhB is ascribed to π-π interactions, pore filling and hydrogen bonding. Additionally, MPMaB showed excellent reusability and maintained high removal efficiency after 5 cycles. In short, MPMaB can efficiently treat chromium and dyes-containing wastewater as sustainable and environmentally friendly adsorbent.

Synthesis of Cellulose-Poly(Acrylic Acid) Using Sugarcane Bagasse Extracted Cellulose Fibres for the Removal of Heavy Metal Ions

In this study, sugarcane bagasse (SCB) was treated with sodium hydroxide and bleached to separate the non-cellulose components to obtain cellulose (CE) fibres. Cross-linked cellulose-poly(sodium acrylic acid) hydrogel (CE-PAANa) was successfully synthesised via simple free-radical graft-polymerisation to remove heavy metal ions. The structure and morphology of the hydrogel display an open interconnected porous structure on the surface of the hydrogel. Various factors influencing batch adsorption capacity, including pH, contact time, and solution concentration, were investigated. The results showed that the adsorption kinetics were in good agreement with the pseudo-second-order kinetic model and that the adsorption isotherms followed the Langmuir model. The maximum adsorption capacities calculated by the Langmuir model are 106.3, 333.3, and 163.9 mg/g for Cu(II), Pb(II), and Cd(II), respectively. Furthermore, X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray spectrometry (EDS) results demonstrated that cationic exchange and electrostatic interaction were the main heavy metal ions adsorption mechanisms. These results demonstrate that CE-PAANa graft copolymer sorbents from cellulose-rich SCB can potentially be used for the removal of heavy metal ions.

Facile synthesis of ZIF-8-lignosulfonate microspheres with ultra-high adsorption capacity for Congo red and tetracycline removal from water

Zeolitic imidazolate frameworks (ZIFs) can be used as adsorbent to efficiently adsorb organic pollutants. However, the hydrophobicity of the ZIFs may be easily to form ZIFs nanoparticles aggregates, hampering the effective and practical application in adsorption. In this study, novel spherical composites of ZIF-8 incorporated with lignosulfonate (LS) were synthesized by in-situ growth method. The effects of different mass ratios of LS and Zn in ZIF-8-LS composites were evaluated with respect to structural characteristics and adsorption properties. As an adsorbent for adsorptive removing Congo Red (CR) and tetracycline (TC) from water, the prepared ZIF-8-LS₄ shows the best adsorption capacity of 31.5 mg g^-1 and 48 mg g^-1, respectively. The spherical structure facilitates the contact between the ZIF-8 and the adsorbed substance, in addition to the H-bonding, electrostatic and π-π stacking interactions also contribute to the improvement of the adsorption performance of the ZIF-8-LS₄ composite. The outstanding adsorption capacity and good reusability of the ZIF-8-LS₄ composite provide a good prospect for the effective removal of other contaminants from water.

Amino-Functionalized Cellulose Nanofiber/Lignosulfonate New Aerogel Adsorbent for the Removal of Dyes and Heavy Metals from Wastewater

Due to the increasingly widespread water pollutants and the high cost of treatment methods, there is a demand for new, inexpensive, renewable, and biodegradable adsorbent materials for the purification of wastewater contaminants. In this study, a new biocomposite aerogel (Amf-CNF/LS) was prepared using a chemically cross-linking method between the amino-functionalized cellulose nanofibers (Amf-CNF) and lignosulfonates (LS). The physical and chemical properties of the prepared aerogel were investigated using several techniques including elemental analysis, scanning electron microscopy (SEM-EDS), Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA), and N₂ adsorption-desorption analysis. The Amf-CNF/LS aerogel was then applied for the removal of methylene blue (MB), rhodamine B dye (RhB), and the heavy metal cadmium ion (Cd²⁺) from synthetic wastewater solutions. The adsorption parameters controlling the adsorption process including the pH, contact time, adsorbent dosage, and adsorbate concen-tration were optimized. High adsorption kinetics and isotherms were observed, with the adsorption isotherms of the Amf-CNF/LS aerogel fitting the Langmuir model with maximum adsorption capacities of 170.94, 147.28, and 129.87 mg/g for MB, RhB, and Cd²⁺, respectively. These results show that Amf-CNF/LS aerogel is a promising green and inexpensive adsorbent for MB, RhB, and Cd²⁺ removal from wastewater.

Magnetic biochar based on furfural residue as an excellent candidate for efficient adsorption of Tetracycline, Bisphenol A, Congo red, and Cr6

Magnetic porous adsorbent materials are widely favored for their large specific surface area, good adsorption performance, and ease of separation. This work provided a magnetic biochar derived from furfural residue (M-FRAC) with excellent adsorption properties for various pollutants, including Congo red (CR), Tetracycline (TC), Bisphenol A (BPA), and Cr⁶⁺. The influence of experimental parameters, such as pollutant concentration, contact time, and pH, on the adsorption properties of M-FRAC was studied in detail. The adsorption process was highly dependent on pH and initial contaminant concentration. All pollutant adsorption was favorable under acidic conditions. The optimal pH of the CR, TC, and Cr⁶⁺ adsorption was 5, 4, and 2, respectively, while that of BPA was in the range of 2-5. The experimental equilibrium adsorption amount of CR, TC, BPA, and Cr⁶⁺ by M-FRAC was 110.89, 602.81, 157.76, and 265.31 mg/g, respectively. The adsorption processes of pollutants on M-FRAC were in accordance with the Langmuir isotherm model. The adsorption kinetics fitted the pseudo-second-order (PSO) kinetics model. In addition, M-FRAC could be readily separated from solution by applying an external magnetic field. Therefore, the M-FRAC has a good application prospect in practical industrial wastewater treatment.

Enhanced removal of hexavalent chromium by lignosulfonate modified zero valent iron: Reaction kinetic, performance and mechanism

The application of lignin derivative as modifier is an economical and efficient approach to improve the reactivity of raw material towards pollutant removal. In this study, lignosulfonate modified zero valent iron (LS-ZVI) was firstly prepared by ball-milling method and utilized for Cr(VI) removal under different conditions. The comparative experiments showed that lignosulfonate modification could significantly enhance the Cr(VI) removal by ZVI from <10 % to 100 % within 90 min reaction. Compared to ZVI, the specific surface area of LS-ZVI increased 3.4 times and surface Fe(0) content increased from 3.4 % to 10.5 % due to the surface erosion, resulting in the high-efficient Cr(VI) removal. Solution and solid-phase analyses indicated that Fe(0) played dominated role and generated Fe(II) involved in Cr(VI) removal process, which mainly included rapid adsorption, reduction and co-precipitation. Batch experiments revealed that lower pH conditions were beneficial for Cr(VI) removal and the effect of co-existing ions (Ca²⁺, Mg²⁺, NO₃^-, Cl^-, and SO₄^2-) was negligible except the inhibitory effect of NO₃^-. Moreover, LS-ZVI also exhibited excellent removal performance for Ni(II), Zn(II), and Cd(II) with removal efficiency beyond 96.6 %. Overall, this work provides a feasible approach for enhancing the reactivity of commercial ZVI in the treatment of heavy metal pollution.

Self-assembled/composited lignin colloids utilizing for therapy, cosmetics and emulsification

Lignin, the most abundant source of renewable aromatic compounds on the planet, is attracting more scholarly attention due to its possibility of replacing petroleum-based chemicals and products. However, it remains underutilized because of the heterogeneity of its multi-level structure that prevents homogenization and standardization of derived products. The key to solving these problems lies in finding a general preparation method to achieve the integrated utilization of lignin molecules at all levels. The assembly-mediated granulation methods provide a significant means for the integrated value-added utilization of lignin, and for biomass productization applications, it is significant to understand the molecular mechanisms of lignin nano-colloids (LNCs) formation thus accurately guiding their functionalization. Therefore, a thorough understanding of the assembly morphology and behavior of lignin in different solutions towards colloids is of great scientific importance. In this minireview, we focus on the assembly behavior of lignin in different solvents, specifically in mono-solvent and multi-solvent, and in particular, we review various methods for preparing lignin composite colloids and concentrate on the applications in therapy, cosmetics and emulsification, which are important for guiding the preparation and efficient utilization of LNCs.

Versatile mechanisms and enhanced strategies of pollutants removal mediated by Shewanella oneidensis: A review

The removal of environmental pollutants is important for a sustainable ecosystem and human health. Shewanella oneidensis (S. oneidensis) has diverse electron transfer pathways and can use a variety of contaminants as electron acceptors or electron donors. This paper reviews S. oneidensis's function in removing environmental pollutants, including heavy metals, inorganic non-metallic ions (INMIs), and toxic organic pollutants. S. oneidensis can mineralize o-xylene (OX), phenanthrene (PHE), and pyridine (Py) as electron donors, and also reduce azo dyes, nitro aromatic compounds (NACs), heavy metals, and iodate by extracellular electron transfer (EET). For azo dyes, NACs, Cr(VI), nitrite, nitrate, thiosulfate, and sulfite that can cross the membrane, S. oneidensis transfers electrons to intracellular reductases to catalyze their reduction. However, most organic pollutants cannot be directly degraded by S. oneidensis, but S. oneidensis can remove these pollutants by self-synthesizing catalysts or photocatalysts, constructing bio-photocatalytic systems, driving Fenton reactions, forming microbial consortia, and genetic engineering. However, the industrial-scale application of S. oneidensis is insufficient. Future research on the metabolism of S. oneidensis and interfacial reactions with other materials needs to be deepened, and large-scale reactors should be developed that can be used for practical engineering applications.

Cellulose-based bio-adsorbent from TEMPO-oxidized natural loofah for effective removal of Pb(II) and methylene blue

Excessive discharge of inorganic and organic contaminants in water poses a serious threat to the ecosystems. However, most synthetic adsorbents lack cost-effectiveness in terms of preparation. Interestingly, loofah sponge (LS) was a natural absorbent that could effectively remove pollutions in wastewater, but its adsorption capacity is barely satisfactory. Herein, we present a novel strategy of TEMPO-oxidized loofah sponge (TOLS) to boost the adsorption performance of LS. The batch experiments demonstrated that the maximum removal capacity of TOLS for Pb(II) and methylene blue (MB) was 96.6 mg/g and 10.0 mg/g, respectively, which were 3.5 and 1.3 times that of pristine LS. Notably, the continuous-flow reaction testing of the mixed solution revealed that the elimination rate of Pb(II) and MB was still better than 90 % even after 16 h. Such excellent performance was benefit from the enhanced specific surface area and surface carboxyl content of TOLS. This work offers new insights into the rational development of multifunctional and inexpensive cellulose-based bio-adsorbents for wastewater remediation.

Fabrication of Nano Iron Oxide–Modified Biochar from Co-Hydrothermal Carbonization of Microalgae and Fe(II) Salt for Efficient Removal of Rhodamine B

Dye adsorption by magnetic modified biochar has now received growing interest due to its excellent adsorption performance and facile separation for recycling. In this study, nano iron oxide–modified biochar was fabricated via the successive hydrothermal-pyrolyzing method using Chlorella vulgaris (Cv) and FeSO₄·7H₂O as raw materials, and its adsorption on Rhodamine B (RhB) in aqueous solution was studied. Multiple techniques such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET), vibrating sample magnetometry (VSM) and X-ray photoelectron spectroscopy (XPS) were employed to comprehensively characterize the structure, morphology and physicochemical properties of the adsorbent. The as-synthesized nano iron oxide–modified biochar (CBC-Fe(II)) exhibited a large surface area (527.6 m²/g) and high magnetic saturation value (13.7 emu/g) to facilitate magnetic separation. Compared with CBC and CBC-Fe(III), CBC-Fe(II) exhibited superior adsorption ability towards RhB in aqueous solution, with a maximum adsorption capacity of 286.4 mg/g. The adsorption process of RhB onto CBC-Fe(II) was well described by the pseudo-second-order kinetic model and Langmuir isotherm model, indicating monolayer chemisorption behaviors for the adsorption system. Facile preparation, great adsorption performance and magnetic recovery properties endow CBC-Fe(II) to be a promising adsorbent for dye removal.

Carboxylate-functionalized dragon fruit peel powder as an effective adsorbent for the removal of Rhodamine B (cationic dye) from aqueous solution: adsorption behavior and mechanism

In this study, we used a simple and low-toxicity chemical treatment to make a carboxylate-functionalized dragon fruit peel powder (CF-DFPP) from dragon fruit peel to improve its capacity for adsorbing Rhodamine B (RhB) from an aqueous medium. Field Emission-Scanning Electron Microscopy/Energy-Dispersive X-ray (FE-SEM/EDX), point of zero charges (pH_PZC), Brunauer-Emmett-Teller (BET), and Fourier Transform Infrared (FT-IR) analyses were performed to characterize the adsorbent materials. The adsorption performance and mechanism for the removal of RhB were examined. The kinetic, isotherm and thermodynamic parameters were employed to evaluate the adsorption mechanism. Compared to other models, the Langmuir isotherm and PSO kinetic models better defined the experimental data. CF-DFPP adsorbent exhibited a maximum adsorption efficiency of 228.7 mg/g at 298 K for RhB adsorption. Thermodynamic analysis revealed that the adsorption of RhB by CF-DFPP was spontaneous (ΔG^o < 0) and exothermic (ΔH^o < 0) nature of the process. Different eluting agents were used in desorption tests, and NaOH was revealed to have greater desorption efficiency (96.8%). Furthermore, regeneration examinations revealed that the biosorbent could effectively retain RhB, even after six adsorption/desorption cycles. These findings demonstrated that the CF-DFPP might be a novel material for removing RhB from an aqueous medium.

A novel lignin-based hierarchical porous carbon for efficient and selective removal of Cr(VI) from wastewater

A novel lignin-based hierarchical porous carbon (L-HPC) was prepared to remove Cr(VI) from water by using industrial alkali lignin through simple hydrothermal-induced assembly and alkali activation strategy. The adsorbent were characterized by SEM-EDS mapping, TEM, BET, XPS, FTIR, Raman spectroscopy and zeta potential. The characterization results indicated that L-HPC contained three-dimensional connected channels and many adsorbing N, O and other adsorption groups, which is very beneficial for Cr(VI) adsorption. The kinetics showed that the L-HPC adsorption of Cr(VI) was chemical adsorption and mainly controlled by intraparticle diffusion. The isotherm and thermodynamics indicated that L-HPC adsorption of Cr(VI) conforms to the Freundlich model, L-HPC is a kind of multimolecular layer adsorbent, and the adsorption capacity of Cr(VI) by L-HPC was 887.8 mg/g, which was significantly higher than values for other adsorbents. Ion competition simulation and actual water body tests showed that L-HPC exhibits high selectivity for Cr(VI) adsorption, adsorption cycle experiments show that L-HPC maintains over 83% performance after 12 cycles. Cost analysis shows that L-HPC is suitable for mass production. Therefore, L-HPC is a Cr(VI) adsorbent with high efficiency, high selectivity, and high reusability, which is broadly applicable and shows favorable prospects.

One-step fabrication of dual functional Tb3+ coordinated polymeric micro/nano-structures for Cr(VI) adsorption and detection

Hexavalent chromium Cr(VI) has been considered as one of the most hazardous heavy metals because of its strong and persistent toxicity to the ecosystem and human beings. Herein, we have synthesized a double hydrophilic block co-polyarylene ether nitriles (abbreviated as dhPEN) bearing aromatic backbone as well as pendent carboxyl and sulfonate groups. Afterward, the synthesized dhPEN has been co-assembled with the lanthanide Tb³⁺ via a one-step solvent exchange protocol, leading to generation of Tb³⁺ coordinated dhPEN (Tb-dhPEN) micro/nano-structures that exhibit good adsorption capacity and detection sensitivity towards Cr(VI). More specifically, the direct self-assembly of dhPEN and Tb³⁺ in mixed H₂O/DMF solvents resulted to Tb-dhPEN microparticles with lamellar structures, which exhibited a high Cr(VI) adsorption capacity approaching to 402 mg/g. The detailed characterization confirm that Cr(VI) is adsorbed and partially reduced to Cr(III) by the Tb-dhPEN microparticles via chemical interaction. Furthermore, the self-assembly of dhPEN with Tb³⁺ in the H₂O/DMF mixed solvents containing NaOH contributed to the generation of spherical nanoparticles showing green emission at 545 nm, which can be selectively quenched by the Cr(VI), leading to the specific detection of trace concentration of Cr(VI) down to 0.12 nM as well as reliable determination of Cr(VI) presented in real environmental samples.

Magnetic Adsorbents for Wastewater Treatment: Advancements in Their Synthesis Methods

The remediation of water streams, polluted by various substances, is important for realizing a sustainable future. Magnetic adsorbents are promising materials for wastewater treatment. Although numerous techniques have been developed for the preparation of magnetic adsorbents, with effective adsorption performance, reviews that focus on the synthesis methods of magnetic adsorbents for wastewater treatment and their material structures have not been reported. In this review, advancements in the synthesis methods of magnetic adsorbents for the removal of substances from water streams has been comprehensively summarized and discussed. Generally, the synthesis methods are categorized into five groups, as follows: direct use of magnetic particles as adsorbents, attachment of pre-prepared adsorbents and pre-prepared magnetic particles, synthesis of magnetic particles on pre-prepared adsorbents, synthesis of adsorbents on preprepared magnetic particles, and co-synthesis of adsorbents and magnetic particles. The main improvements in the advanced methods involved making the conventional synthesis a less energy intensive, more efficient, and simpler process, while maintaining or increasing the adsorption performance. The key challenges, such as the enhancement of the adsorption performance of materials and the design of sophisticated material structures, are discussed as well.

Enhancement of dispersion stability of inorganic additives via poly(sodium-4-styrenesulfonate) treatment geared to hydrogel applications

This study reports the preparation of poly(sodium-4-styrene sulfonate) (PSS) treated bentonite and clinoptilolite to prevent the agglomeration and sedimentation of these inorganic fillers during the preparation of hydrogel. For this purpose PSS treated fillers were prepared by using various techniques (dip and dry, hydrothermal, one-step ball milling and ultrasonication methods). The most suitable technique for preparing these PSS treated inorganic fillers (abbreviated as BP-dip and CP-dip) was the dip and dry method. BP-dip and CP-dip based polyvinyl alcohol/polyvinylpyrrolidone (PVA/PVP) composite hydrogels were prepared using the freeze/thawing method after the addition of one of BP-dip and CP-dip inorganic fillers in various amounts. The swelling properties, stability behaviors and Rhodamine B (RhB) adsorption of the composite hydrogels were studied. It was found that the swelling degrees of CP-dip and BP-dip based composite hydrogels with 25 mg of filler were higher than that of all other samples. The kinetic mechanism of RhB adsorption process and the related characteristic kinetic parameters were investigated by Pseudo kinetic models. The adsorption kinetics results for RhB adsorption were found best fitted with pseudo-second-order kinetics model. The maximum RhB adsorption capacity was determined to be for PVA/PVP-CP-dip25, which was 3.3 times higher than that of the unfilled PVA/PVP hydrogel.

Evaluation of poly(ethylene diamine-trimesoyl chloride)-modified diatomite as efficient adsorbent for removal of rhodamine B from wastewater samples

Diatomite (D) as a low-cost and eco-friendly clay was modified by ethylene diamine (EDA)-trimesoyl chloride (TMC) polymer to achieve a novel adsorbent for efficient removal of rhodamine B dye (RB) from wastewater samples. The EDA-TMC polymer was grafted to the surface of diatomite by in situ interfacial polymerization. The prepared p(EDA-TMC)/D adsorbent was characterized by XRD, FTIR, and SEM/EDX techniques. The effective experimental parameters on the adsorption performance were optimized with factorial design analysis. The equilibrium data were better correlated by non-linear Langmuir model compared to non-linear Freundlich model. The Langmuir monolayer adsorption capacity of the p(EDA-TMC)/D adsorbent was determined as 371.8 mg g^-1. The key adsorption parameters were optimized by experimental design analysis. The kinetic findings showed the adsorption mechanism of RB onto p(EDA-TMC)/D adsorbent was well designated by the pseudo-second-order kinetic model. The thermodynamic results indicate that the RB adsorption had an exothermic character in thermal nature and was less favorable with increasing temperature from 20 to 60 °C. Furthermore, the adsorption/desorption yield of p(EDA-TMC)/D was still 80%/70% after 5^th cycle and reduced to 60%/52% at the end of 8^th cycle. Thus, the present study revealed that the developed p(EDA-TMC)/D composite had great adsorption potential for removal of RB from wastewater samples compared to that of different kinds of adsorbents reported in the literature.

Multifunctional lignin-based nanocomposites and nanohybrids

Significant progress in lignins valorization and development of high-performance sustainable materials have been achieved in recent years. Reports related to lignin utilization indicate excellent prospects considering green chemistry, chemical engineering, energy, materials and polymer science, physical chemistry, biochemistry, among others. To fully realize such potential, one of the most promising routes involves lignin uses in nanocomposites and nanohybrid assemblies, where synergistic interactions are highly beneficial. This review first discusses the interfacial assembly of lignins with polysaccharides, proteins and other biopolymers, for instance, in the synthesis of nanocomposites. To give a wide perspective, we consider the subject of hybridization with metal and metal oxide nanoparticles, as well as uses as precursor of carbon materials and the assembly with other biobased nanoparticles, for instance to form nanohybrids. We provide cues to understand the fundamental aspects related to lignins, their self-assembly and supramolecular organization, all of which are critical in nanocomposites and nanohybrids. We highlight the possibilities of lignin in the fields of flame retardancy, food packaging, plant protection, electroactive materials, energy storage and health sciences. The most recent outcomes are evaluated given the importance of lignin extraction, within established and emerging biorefineries. We consider the benefit of lignin compared to synthetic counterparts. Bridging the gap between fundamental and application-driven research, this account offers critical insights as far as the potential of lignin as one of the frontrunners in the uptake of bioeconomy concepts and its application in value-added products.

Adsorptive removal of Rhodamine B dye from aqueous solution by using graphene-based nickel nanocomposite

In this work, reduced graphene oxide-nickel (RGO–Ni) nanocomposite is synthesized. X-ray diffraction (XRD), scanning electron microscopy (SEM) and SEM–EDS (Energy Dispersive X-Ray Spectroscopy) are used to study the crystalline nature, morphology and elemental composition of the RGO–Ni nanocomposite, respectively. As synthesized RGO–Ni nanocomposite is used to develop selective adsorptive removal of Rhodamine B (RhB) dye from the aqueous solution. The experiments have been performed to investigate RhB uptake via RGO–Ni nanocomposites which include, contact time (60 min), initial dye concentration (50 mg/100 ml), adsorbent dosage (0.5 mg) and pH 8 of dye solution. The equilibrium concentration is determined by using different models namely, Freundlich, Langmuir and Tempkin. Langmuir isotherm has been fitted well. Langmuir and Tempkin equations are determined to have good agreement with the correlation coefficient data. The kinetic study concluded that RhB dye adsorption follows with the pseudo-second-order kinetic model. Further, adsorption mechanism of RGO–Ni is proposed which involves three steps. The synthesized adsorbent is compared with the other adsorbents in the literature and indicates that RGO–Ni nanocomposite used in this study shown better results for a particular adsorption capacity than polymeric, natural and synthetic bioadsorbents. The regeneration and reusability experiments suggest RGO–Ni nanocomposite can be used for many numbers of times for purification/adsorption.

Lignin-derived (nano)materials for environmental pollution remediation: Current challenges and future perspectives

The supply of affordable drinking and sufficiently clean water for human consumption is one of the world's foremost environmental problems and a large number of scientific research works are addressing this issue Various hazardous/toxic environmental contaminants in water bodies, both inorganic and organic (specifically heavy metals and dyes), have become a serious global problem. Nowadays, extensive efforts have been made to search for novel, cost effective and practical biosorbents derived from biomass resources with special attention to value added, biomass-based renewable materials. Lignin and (nano)material adorned lignin derived entities can proficiently and cost effectively remove organic/inorganic contaminants from aqueous media. As low cost of preparation is crucial for their wide applications in water/wastewater treatment (particularly industrial water), future investigations must be devoted to refining and processing the economic viability of low cost, green lignin-derived (nano)materials. Production of functionalized lignin, lignin supported metal/metal oxide nanocomposites or hydrogels is one of the effective approaches in (nano)technology. This review outlines recent research progresses, trends/challenges and future prospects about lignin-derived (nano)materials and their sustainable applications in wastewater treatment/purification, specifically focusing on adsorption and/or catalytic reduction/(photo)degradation of a variety of pollutants.

Synthesis of sodium lignosulfonate-guar gum composite hydrogel for the removal of Cu2+ and Co2

As an emerging pollutant treatment material, hydrogel is known for its good adsorption capacity and environmental friendliness. In this study, a composite material of acrylic acid as the polymerization monomer grafted sodium lignosulfonate and guar gum was prepared, which provided a channel for adsorbing metal ions with its abundant active functional groups and porous structure. The optimized synthesized product was applied to the removal of Cu²⁺ and Co²⁺ in a one-component system and a multi-component system, and the maximum ion adsorption capacities obtained were determined to be 709 mg g^-1 of Cu²⁺, 601 mg g^-1 of Co²⁺, respectively. The adsorption kinetics and isotherms were well fitted by the pseudo second-order kinetic model and the Langmuir isotherm, showing that the adsorption of Cu²⁺ and Co²⁺ by the adsorbent belongs to the chemisorption on monolayer. XPS results confirmed the successful adsorption of Cu²⁺ and Co²⁺ by GG/SLS. Surface complexation was proposed to be the main mechanism for GG/SLS adsorbent to remove heavy metal ions. In addition, the use of recycling research showed that the adsorbent has good chemical stability. These results provided valuable information for designing highly efficient adsorbents that can be used as a high-quality wastewater treatment material.

Synthesis Mechanism of an Environment-Friendly Sodium Lignosulfonate/Chitosan Medium-Density Fiberboard Adhesive and Response of Bonding Performance to Synthesis Mechanism

Environment-friendly medium-density fiberboards (MDFs) prepared using sodium lignosulfonate/chitosan adhesives (L/C) show potential in environment-friendly wood-based panel application. However, the synthesis mechanism of this adhesive and the relationships between synthesis mechanism and bonding performance were not discussed in depth. Herein, the synthesis mechanism of L/C was explored in detail based on characterizations of L/C with different mass ratios of sodium lignosulfonate to chitosan by Fourier-transform infrared spectroscopy, thermogravimetric analysis, and X-ray diffraction. For L/C with different mass ratios of sodium lignosulfonate to chitosan, the corresponding bonding performance was also determined based on characterizations of mechanical and dimensional performance of MDFs. Results showed a 3D network structure of L/C formed through the hydrogen linkages among hydroxyl groups in sodium lignosulfonate and hydroxyl and amino groups in chitosan, amide linkages resulted from reaction between carbonyl groups in sodium lignosulfonate and amino groups in chitosan, and sulfonamide linkages originated from reaction between sulfonic groups in sodium lignosulfonate and amino groups in chitosan. The mechanical performance of MDF was closely related to the 3D network and amino groups of L/C, while the dimensional performance of MDF was negatively affected by sodium lignosulfonate. The MDFs with 1:3 and 1:2 mass ratios of sodium lignosulfonate to chitosan showed superior mechanical properties and comparable dimensional performance with a commercial panel.

Coadsorption behaviors and mechanisms of Pb(ii) and methylene blue onto a biodegradable multi-functional adsorbent with temperature-tunable selectivity

An entirely bio-degradable adsorbent based on lignin was synthesized by a crosslinking method and the adsorption of methyl blue (MB) and Pb(ii) onto the adsorbent were comparatively investigated, with adsorption behavior and mechanism of the two pollutants on the adsorbent (SLS) being assessed in single and binary systems. According to the results, SLS was capable of effective adsorption using MB and Pb(ii). The adsorption behavior of MB and Pb(ii) followed Langmuir and pseudo-first order models and showed temperature-dependent preferences. At 298 K MB was more preferred while at 318 K Pb(ii) adsorption was more favorable, which means that the selectivity of SLS can be tuned by changing the temperature. From a mechanism aspect, the adsorption of MB and Pb(ii) were both achieved through more than one route. Pb(ii) mainly interacts with sulfonate and hydroxyl groups on SLS, while MB can be bound on both anionic and aromatic groups due to its aromatic nature. Recycling and reuse experiments showed that used SLS can be readily reactivated and stably reused. The findings will guide adsorbent applications in wastewater containing heavy metals and aromatic compounds.

Green microwave synthesis of functionalized chitosan with robust adsorption capacities for Cr(VI) and/or RHB in complex aqueous solutions

Dinitrosalicylic acid-functionalized chitosan, CHN-DNSA, was developed and improved the adsorption property against chromium Cr(VI) and/or Rhodamine B (RHB). Here, the disposal of wastewater bearing Cr(VI) and RHB from a complex system was ascribed to significant differences in physicochemical properties. The constructed CHN-DNSA surface charge is responsible for different interactions enabling simultaneous capture of pollutants. The excellent adsorption potency of Cr(VI) at pH 3.0 was 98.4% within a remarkable 1 h and the adsorption performance was 91.1% for RHB. The ionic strength was affected, reducing the removal % of Cr(VI) to 36.7% whereas 0.1 M NaCl meliorated the removal efficiency from 91.6 to 96.2% for RHB and from 82.3 to 89.1% for a binary system. Also, the exploited elimination process of Cr(VI) and/or RHB obeyed the 2nd model of kinetics and the Freundlich system. Good recovery, superior capacity, and synthetic approach make this protocol promising for wastewater treatment.

Characteristics of natural biopolymers and their derivative as sorbents for chromium adsorption: a review

Abstract

Chromium is widely used in industry, and improper disposal of wastewater and industrial residues containing excessive chromium can contaminate water and soil, endangering both environmental and human health. Natural biopolymers and their derivatives have been investigated for removal of chromium (Cr) from wastewater. Cellulose, lignin, tannin, chitin, chitosan, and polypeptides are abundant in nature, and have high potential as adsorbents due to their easy access, low cost, and the recyclability of the captured heavy metals. In order to improve their mechanical strength, recyclability, specific surface area, binding site number, and adsorption rate as adsorbents, native materials have also been modified. This review discusses the source of chromium contamination and the main species of interest, as well as their toxicity. The structures of the aforementioned biopolymers were analyzed, and the adsorption mechanism of chromium and the main influencing factors on this process are discussed. The modification methods of various adsorbents and their adsorption effects on chromium are also detailed, and the developmental direction of research on the use of biopolymer adsorption remediation to control chromium contamination is discussed.

Graphical abstract

The magnetic covalent organic framework as a platform for high-performance extraction of Cr(VI) and bisphenol a from aqueous solution

The magnetic covalent organic framework with β-ketoenamine linkage (Fe₃O₄@COF(TpPa-1)) was fabricated by the hydrothermal method. The obtained Fe₃O₄@TpPa-1 integrated four advantages, namely easy preparation, high stability, excellent adsorption performance (485.2 m²/g) and good recoverability (19.5 emu/g), which enabled it an ideal sorbent for wastewater treatment. Fe₃O₄@TpPa-1 exhibited excellent adsorption capacities for Cr (VI) (245.45 mg/g) and bisphenol A (1220.97 mg/g). The adsorption kinetics and isotherms were in alignment to the pseudo-second-order and Langmuir model, respectively. After five times cycles, the adsorption capacity of Fe₃O₄@TpPa-1 still retained at a high level. According to Materials Studio simulation and XPS analysis, the adsorption mechanism was attributed to the presence of the homogeneously distributed imine and carbonyl functional groups in the framework of TpPa-1, allowing them to serve as platforms for anchoring heavy metals and organic pollutants. Besides, the hydrophobic skeleton structures of TpPa-1 endowed them good adsorption performance towards organic pollutants via hydrogen -bonding (NH^…O^…HO) and π-π interaction. Therefore, the recyclable Fe₃O₄@TpPa-1 showed a broad application prospects in environmental remediation.

Engineered biochar with anisotropic layered double hydroxide nanosheets to simultaneously and efficiently capture Pb2+ and CrO42- from electroplating wastewater

Cationic and anionic heavy metal contaminants generally co-exist in practical industrial effluent, and simultaneously removal of these species is a bottleneck for most of the bio-adsorbents because of their contrary charge. In this work, pinewood sawdust derived engineered biochar (BC) was fabricated with MgAl layered double hydroxide (MgAl-LDH) nanosheets, which could efficiently and simultaneously capture heavy metal cations and oxyanions from wastewater. The synergetic effect between loaded MgAl-LDH and BC substantially improves its adsorption performance towards both cationic and anionic contaminants, i.e., Pb2+ and CrO42-. The adsorption capacity of MgAl-LDH/BC for Pb2+ reached 591.2 mg/g, which is 263% higher than that of BC, and in the case of CrO42-, the adsorption capacity is 330.8 mg/g, 416% higher than that of BC. The elimination of Pb2+ was mainly attributed to forming complexations with surface functional groups. While for oxyanions removal, CrO42- can be reduced to Cr3+ by functional groups, and then generated Cr3+ could replace Al3+ via morphic substitution, consequently formed an MgCr-LDH structure. Further, in the continuous fixed-bed column study, 225 bed volume of simulating electroplating wastewater co-existed with Pb2+ and CrO42- can be efficiently treated. Hence, this study sheds light on the engineered biochar design to efficiently and simultaneously capture heavy metal cations and oxyanions and its feasibility on real wastewater purification.

Removal of gentian violet and rhodamine B using banyan aerial roots after modification and mechanism studies of differential adsorption behaviors

A novel adsorbent derived from banyan aerial roots was prepared via modification and employed to aqueous gentian violet (GV) and rhodamine B (RhB) removal. The surface morphology and physicochemical properties of modified banyan aerial roots (MBARs) were investigated by SEM, EDS, N₂ adsorption/desorption, zeta potential, XRD, and FT-IR characterization experiments. Adsorption factors were tested, and the optimal conditions for GV and RhB removal were pH of 6 and 3, doses of 0.02 g and 0.03 g, and reaction time of 540 min. Adsorption isotherm simulation illustrated that theoretical monolayer adsorption capacities of GV and RhB were 456.64 mg/g and 115.23 mg/g, respectively. Kinetics data was assessed with pseudo-first-order and pseudo-second-order models, and the latter described GV and RhB adsorption better at 288 K, 298 K, 308 K, and 318 K. Thermodynamic analysis indicated that GV and RhB adsorption processes were endothermic and spontaneous. From the research results, it could be inferred that GV adsorption was mainly dominated by electrostatic interaction, while RhB adsorption might be primarily attributed to electrostatic interaction and hydrogen bonding. The study based on full utilization of waste plant fibers facilitates recycling of biomass resources, and due to simplicity, safety, and eco-friendliness of the preparation, as well as low cost and high efficiency of the application, MBARs may be potential absorbents for the treatment of dyestuff wastewater.

Activated Carbon Microsphere from Sodium Lignosulfonate for Cr(VI) Adsorption Evaluation in Wastewater Treatment

In this study, activated carbon microsphere (SLACM) was prepared from powdered sodium lignosulfonate (SL) and polystyrene by the Mannich reaction and ZnCl₂ activation, which can be used to remove Cr(VI) from the aqueous solution without adding any binder. The SLACM was characterized and the batch experiments were conducted under different initial pH values, initial concentrations, contact time durations and temperatures to investigate the adsorption performance of Cr(VI) onto SLACM. The results indicated that the SLACM surface area and average pore size were 769.37 m²/g and 2.46 nm (the mesoporous material), respectively. It was found that the reduced initial pH value, the increased temperature and initial Cr(VI) concentration were beneficial to Cr(VI) adsorption. The maximum adsorption capacity of Cr(VI) on SLACM was 227.7 mg/g at an initial pH value of 2 and the temperature of 40 °C. The adsorption of SLACM for Cr(VI) mainly occurred during the initial stages of the adsorption process. The adsorption kinetic and isotherm experimental data were thoroughly described by Elovich and Langmuir models, respectively. SL could be considered as a potential raw material for the production of activated carbon, which had a considerable potential for the Cr(VI) removal from wastewater.

Effect of single and binary mixed surfactant impregnation on the adsorption capabilities of chitosan hydrogel beads toward rhodamine B

The adsorption of cationic xanthene dye rhodamine B (RhB) on pure chitosan (CS), single surfactant (SDS, Brij30 and DTAB) and binary surfactant (SDS-Brij30 and DTAB-Brij30) modified chitosan beads has been investigated.

Synthesis of Chitosan-Ignosulfonate Composite as an Adsorbent for Dyes and Metal Ions Removal from Wastewater

Sodium lignosulfonate is a polymer with extensive sources and abundant functional groups. Therefore, it has potential value for research and wide utilization. In this study, the adsorption material was prepared by blending sodium lignosulfonate and chitosan, which could adsorb anionic and cationic dyes and metal ions. The composite was characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and thermogravimetry (TG). The results showed that the composite was cross-linked mainly by the strong electrostatic interaction between the protonated amino group in chitosan and the sulfonate group in sodium lignosulfonate. Moreover, the effects of initial concentration, adsorption time, initial pH, and mass ratio of chitosan to sodium lignosulfonate on the adsorption performance of the composite were investigated. Meanwhile, the adsorption processes were agreed well with the pseudo-second-order kinetic model and Langmuir isotherm model. The adsorption mechanism was that the electrostatic interaction between the protonated amino and hydroxyl groups of the composite with anionic (SO3 -) and HCrO4 - groups of Congo red and Cr(VI), respectively. In addition, the electrostatic interaction between SO3 - of the composite and positively charged group of Rhodamine B played an important role in the adsorption of Rhodamine B.