Robust and selective electrochemical detection of antibiotic residues: The case of integrated lutetium vanadate/graphene sheets architectures

A highly-sensitive electrochemical sensor based on Ni nanoparticles modified carbon nanotubes/sulfonated reduced graphene oxide for the detection of capsaicinoids in leisure sauced meat products

Unclear labeling of spiciness degrees on leisure sauced meat products is prone to resulting in customer complaints and commercial disputes. The content of capsaicinoids is the basis for evaluating the spiciness of food. In this work, an electrochemical sensor based on nickel nanoparticles modified carbon nanotubes (Ni-CNTs) and sulfonated reduced graphene oxide (S-rGO) was developed for the rapid detection of capsaicinoids content in leisure sauced meat products. The linear ranges of capsaicins are 0.01-100 μmol/L with ultra-low detection limits of 1 nmol/L. The outstanding performances are primarily due to the synergistic effect between Ni-CNTs and S-rGO. This effect not only created a three-dimensional stacked structure that improved the electrochemically active surface area, but also generated an internal electric field that improved the charge transfer rate. This work provides a basis for standardized evaluation of spiciness.

Synergism of Holmium Orthovanadate/Phosphorus-Doped Carbon Nitride Nanocomposite: Nonenzymatic Electrochemical Detection of Hydrogen Peroxide

Developing efficient and robust electrode materials for electrochemical sensors is critical for real-time analysis. In this paper, a hierarchical holmium vanadate/phosphorus-doped graphitic carbon nitride (HoVO4/P-CN) nanocomposite is synthesized and used as an electrode material for electrochemical detection of hydrogen peroxide (H2O2). The HoVO4/P-CN nanocomposite exhibits superior electrocatalytic activity at a peak potential of -0.412 V toward H2O2 reduction in alkaline electrolytes while compared with other reported electrocatalysts. The HoVO4/P-CN electrochemical platform operated under the optimized conditions shows excellent analytical performance for H2O2 detection with a linear concentration range of 0.009-77.4 μM, a high sensitivity of 0.72 μA μM-1 cm-2, and a low detection limit of 3.0 nΜ. Furthermore, the HoVO4/P-CN-modified electrode exhibits high selectivity, remarkable stability, good repeatability, and satisfactory reproducibility in detecting H2O2. Its superior performance can be attributed to a large specific surface area, high conductivity, more active surface sites, unique structure, and synergistic action of HoVO4 and P-CN to benefit enhanced electrochemical activity. The proposed HoVO4/P-CN electrochemical platform is effectively applied to ascertain the quantity of H2O2 in food and biological samples. This work outlines a promising and effectual strategy for the sensitive electrochemical detection of H2O2 in real-world samples.

Facile and Affordable Design of MXene-Co3 O4 -Based Nanocomposites for Detection of Hydrogen Peroxide in Cancer Cells: Toward Portable Tool for Cancer Management

Hydrogen peroxide (H2 O2 ) is a primary reactive oxygen species (ROS) that can act as a chemical signal in developing and progressing serious and life-threatening diseases like cancer. Due to the stressful nature of H2 O2 , there is an urgent need to develop sensitive analytical approaches to be applied to various biological matrices. Herein, a portable point-of-care electrochemical system based on MXene-Co3 O4 nanocomposites to detect H2 O2 in different cancer cell-lines is presented. The developed sensor is affordable, disposable, and highly selective for H2 O2 detection. This approach achieves a dynamic linear range of 75 µm with a LOD of 0.5 µm and a LOQ of 1.6 µm. To improve the practical application, the level of ROS is evaluated both in cancer cell lines MDA-MB-231 and DU145, respectively, to breast and prostate cancers, and in healthy HaCat cells. Moreover, the same cancer cells are treated with transforming growth factor-β1, and MXene-Co3 O4 modified strip is capable to monitorROS variation. The results are satisfactory compared with the cellular ROS fluorescent assay based on DCFH/DCFH-DA. These results open new perspectives for real-time monitoring of cancer progression and the efficacy of the therapy.

The Effect of Rare-Earth Elements on the Morphological Aspect of Borate and Electrocatalytic Sensing of Biological Compounds

Adjusting the morphological characteristics of a material can result in improved electrocatalytic capabilities of the material itself. An example of this is the introduction of rare-earth elements into the borate structure, which gives a new perspective on the possibilities of this type of material in the field of (bio)sensing. In this paper, we present the preparation of borates including La, Nd and Dy and their application for the modification of a glassy carbon electrode, which is used for the non-enzymatic detection of a biologically relevant molecule, vitamin B6 (pyridoxine). Compared with the others, dysprosium borate has the best electrocatalytic performance, showing the highest current and the lowest impedance, respectively, as determined using cyclic voltammetry and impedance tests. Quantitative testing of B6 was performed in DPV mode in a Britton-Robinson buffer solution with a pH of 6 and an oxidation potential of about +0.8 V. The calibration graph for the evaluation of B6 has a linear range from 1 to 100 μM, with a correlation coefficient of 0.9985 and a detection limit of 0.051 μM. The DyBO3-modified electrode can be used repeatedly, retaining more than 90% of the initial signal level after six cycles. The satisfactory selectivity offered a potential practical application of the chosen method for the monitoring of pyridoxine in artificially prepared biological fluids with acceptable recovery. In light of all the obtained results, this paper shows an important approach for the successful design of electrocatalysts with tuned architecture and opens new strategies for the development of materials for the needs of electrochemical (bio)sensing.

Facile engineering of gadolinium cobaltite anchored on functionalized carbon black as dynamic electrocatalyst for ultra-sensitive detection of nitroaromatic drug

There has been a significant increase in the production and use of antibiotic drugs. However, the overuse and improper disposal of nitro-based antibiotics pose a significant threat to human health and the ecosystem. Specifically, the residues of antibiotic drugs such as nitrofurantoin (NFT) are dangerous to public health and pose a threat to the environment. In this study, we prepared a novel nanocomposite consisting of gadolinium cobaltite embedded functionalized carbon black (GdCoO3/f-CB) via a simple hydrothermal technique and utilized this nanocomposite as an electrode material for the electrochemical detection of NFT. The structural and morphological properties of the GdCoO3/f-CB nanocomposite was analyzed using a range of techniques, including XRD, Raman, XPS, EDX-Mapping, and HR-TEM. The electrocatalytic activity of the GdCoO3/f-CB nanocomposite was investigated using both CV and DPV techniques for the detection of NFT. Our results demonstrated that the prepared GdCoO3/f-CB nanocomposite delivered the excellent activities toward the detection of NFT at an extremely low limit of detection (LOD) of 2 nM and exhibited high sensitivity of 31 μA·μM-1·cm-2. Additionally, the proposed NFT sensor using GdCoO3/f-CB nanocomposite provided excellent reproducibility, repeatability, and selectivity, even in the presence of interfering molecules such as metal ions, biomolecules, and similar nitro compounds. These findings suggest that the GdCoO3/f-CB nanocomposite provides significant potential for the electrochemical detection of antibiotic drug residues for public health and the environment.

Potential negative effect of long-term exposure to nitrofurans on bacteria isolated from wastewater

Nitrofurans are broad-spectrum bactericidal agents used in a large quantity for veterinary and human therapy. This study reports the long-term impact of two nitrofuran representatives, nitrofurantoin (NFT) and furaltadone (FTD) on the bacterial strains Sphingobacterium siyangense FTD2, Achromobacter pulmonis NFZ2, and Stenotrophomonas maltophilia FZD2, isolated from a full-scale wastewater treatment plant. Bacterial whole genome sequencing was used for preliminary strains characterization. The metabolomic, electrochemical, and culture methods were applied to understand changes in the bacterial strains after 12-month exposure to nitrofurans. The most significantly altered metabolic pathways were observed in amino acid and sugar metabolism, and aminoacyl-tRNA biosynthesis. Disrupted protein biosynthesis was measured in all strains treated with antibiotics. Prolonged exposure to NFT and FTD also triggered mutagenic effects, affected metabolic activity, and facilitated oxidative stress within the cells. Nitrofuran-induced oxidative stress was evidenced from an elevated activity of catalase and glutathione S-transferases. NFT and FTD elicited similar but not identical responses in all analyzed strains. The results obtained in this study provide new insights into the potential risks of the prolonged presence of antimicrobial compounds in the environment and contribute to a better understanding of the possible impacts of nitrofuran antibiotics on the bacterial cells.

ZIF-derived Co nanoparticles embedded into N-doped carbon nanotube composites for highly efficient electrochemical detection of nitrofurantoin in food

Designing efficient and sensitive methods for the detection of nitrofurantoin (NFT) residues is of great importance for food safety and environmental protection. Herein, a composite with cobalt nanoparticles encapsulated in nitrogen-doped carbon nanotube (N/Co@CNTs@CC-II) was synthesized by in-situ growth and sublimation-gas phase transformation strategy and used to establish an ultrasensitive electrochemical sensor for NFT determination. The N/Co@CNTs@CC-II sensor exhibits uniform N doping, fine hollow structure, and abundant active metal sites, which lays a solid foundation for the ultra-sensitive detection of NFT. Benefiting from these advantages, the N/Co@CNTs@CC-II exhibits excellent sensitivity (8.19 μA μM^-1 cm^-2) and low detection limit (18.41 nM) for NFT detection. The practical feasibility of N/Co@CNTs@CC-II was also demonstrated by the determination of NFT in milk and tap water samples. This study may open up new opportunities for the application of N-doped carbon nanotube materials encapsulating transition metals.

A Minireview for Recent Development of Nanomaterial-Based Detection of Antibiotics

Antibiotics are considered a new type of organic pollutant. Antibiotic residues have become a global issue due to their harm to human health. As the use of antibiotics is increasing in human life, such as in medicine, crops, livestock, and even drinking water, the accurate analysis of antibiotics is very vital. In order to develop rapid and on-site approaches for the detection of antibiotics and the analysis of trace-level residual antibiotics, a high-sensitivity, simple, and portable solution is required. Meanwhile, the rapid nanotechnology development of a variety of nanomaterials has been achieved. In this review, nanomaterial-based techniques for antibiotic detection are discussed, and some reports that have employed combined nanomaterials with optical techniques or electrochemical techniques are highlighted.

Hierarchical 3D Snowflake-like Iron Diselenide: A Robust Electrocatalyst for Furaltadone Detection

An electrocatalyst with a large active site is critical for the development of a high-performance electrochemical sensor. This work demonstrates the fabrication of an iron diselenide (FeSe₂)-modified screen-printed carbon electrode (SPCE) for the electrochemical determination of furaltadone (FLD). It has been prepared by the facile method and systematically characterized with various microscopic/spectroscopic approaches. Due to advantageous physiochemical properties, the FeSe₂/SPCE showed a low charge-transfer resistance value of 200 Ω in 5.0 mM [Fe(CN)₆]^3-/4- containing 0.1 M KCl. More importantly, the FeSe₂/SPCE exhibited superior catalytic performance compared to the bare SPCE for FLD sensing based on the electrochemical response in terms of a peak potential of -0.44 V (vs Ag/AgCl (sat. KCl)) and cathodic response current of -22.8 μA. Operating at optimal conditions, the FeSe₂-modified electrode showed wide linearity from 0.01 to 252.2 μM with a limit of detection of 0.002 μM and sensitivity of 1.15 μA μM^-1 cm^-2. The analytical performance of the FeSe₂-based platform is significantly higher than many previously reported FLD electrochemical sensors. Furthermore, the FeSe₂/SPCE also has a promising platform for FLD detection with high sensitivity, good selectivity, excellent stability, and robust reproducibility. Thus, the finding above shows that the FeSe₂/SPCE is a highly suitable candidate for the electrochemical determination of glucose levels for real-time applications such as in human urine and river water samples.

Bimetallic Cu5Zn8 alloy-embedded hollow porous carbon nanocubes derived from 3D-Cu/ZIF-8 as efficient electrocatalysts for environmental pollutant detection in water bodies

Excessive use of nitrofurantoin (NFT) and its residues can be harmful to the ecosystem, and to mitigate this, rapid and cost-effective detection of NFT in water bodies is needed. In this regard, we prepared a three-dimensional (3D) copper-zeolitic imidazole framework (Cu/ZIF-8)-derived bimetallic Cu₅Zn₈ alloy-embedded hollow porous carbon nanocubes (Cu₅Zn₈/HPCNC) for electrochemical detection of NFT. The resultant material is characterized using suitable spectrophotometry and voltammetry methods. Cu₅Zn₈/HPCNC is an effective electrocatalyst with high electrical conductivity and a fast electron transfer rate. It also has more catalytic active sites for improved electrochemical reduction of NFT. Fabricated Cu₅Zn₈/HPCNC-modified screen-printed electrode (SPE) for NFT reduction have a wide linear range with a low detection limit, and high sensitivity (15.343 μA μМ^-1 cm^-2), appreciable anti-interference ability with related nitro compounds, storage stability, reproducibility, and repeatability. Also, the practicability of Cu₅Zn₈/HPCNC/SPE can be successfully employed in NFT monitoring in water bodies (drinking water, pond water, river water, and tap water) with satisfactory recoveries.

Dynamics of microbial communities during biotransformation of nitrofurantoin

The purpose of this research was to investigate the biodegradation of nitrofurantoin (NFT), a typical nitrofuran antibiotic of potential carcinogenic properties, by two microbial communities derived from distinct environmental niches - mountain stream (NW) and seaport water (SS). The collected environmental samples represent the reserve of the protected area with no human intervention and the contaminated area that concentrates intense human activities. The structure, composition, and diversity of the communities were analyzed at three timepoints during NFT biodegradation. Comamonadaceae (43.2%) and Pseudomonadaceae (19.6%) were the most abundant families in the initial NW sample. The top families in the initial SS sample included Aeromonadaceae (31.4%) and Vibrionaceae (25.3%). The proportion of the most abundant families in both consortia was remarkably reduced in all samples treated with NFT. The biodiversity significantly increased in both consortia treated with NFT suggesting that NFT significantly alters community structure in the aquatic systems. In this study, NFT removal efficiency and transformation products were also studied. The biodegradation rate decreased with the increasing initial NFT concentration. Biodegradation followed similar pathways for both consortia and led to the formation of transformation products: 1-aminohydantoin, semicarbazide (SEM), and hydrazine (HYD). SEM and HYD were detected for the first time as NFT biotransformation products. This study demonstrates that the structure of the microbial community may be directly correlated with the presence of NFT. Enchanced biodiversity of the microbial community does not have to be correlated with increase in functional capacity, such as the ability to biodegradation because higher biodiversity corresponded to lower biodegradation. Our findings provide new insights into the effect of NFT contamination on aquatic microbiomes. The study also increases our understanding of the environmental impact of nitrofuran residues and their biodegradation.

Zinc Oxide/Phosphorus-Doped Carbon Nitride Composite as Potential Scaffold for Electrochemical Detection of Nitrofurantoin

Herein, we present an electrocatalyst constructed by zinc oxide hexagonal prisms/phosphorus-doped carbon nitride wrinkles (ZnO HPs/P-CN) prepared via a facile sonochemical method towards the detection of nitrofurantoin (NF). The ZnO HPs/P-CN-sensing platform showed amplified response and low-peak potential compared with other electrodes. The exceptional electrochemical performance could be credited to ideal architecture, rapid electron/charge transfer, good conductivity, and abundant active sites in the ZnO HPs/P-CN composite. Resulting from these merits, the ZnO HPs/P-CN-modified electrode delivered rapid response (2 s), a low detection limit (2 nM), good linear range (0.01-111 µM), high sensitivity (4.62 µA µM^-1 cm²), better selectivity, decent stability (±97.6%), and reproducibility towards electrochemical detection of NF. We further demonstrated the feasibility of the proposed ZnO HPs/P-CN sensor for detecting NF in samples of water and human urine. All the above features make our proposed ZnO HPs/P-CN sensor a most promising probe for detecting NF in natural samples.

Fabrication of Praseodymium Vanadate Nanoparticles on Disposable Strip for Rapid and Real-Time Amperometric Sensing of Arsenic Drug Roxarsone

Nanomaterials have versatile properties owing to their high surface-to-volume ratio and can thus be used in a variety of applications. This work focused on applying a facile hydrothermal strategy to prepare praseodymium vanadate nanoparticles due to the importance of nanoparticles in today's society and the fact that their synthesis might be a challenging endeavor. The structural and morphological characterizations were carried out to confirm the influence of the optimizations on the reaction's outcomes, which revealed praseodymium vanadate (PrVO₄) with a tetragonal crystal system. In this regard, the proposed development of electrochemical sensors based on the PrVO₄ nanocatalyst for the real-time detection of arsenic drug roxarsone (RXS) is a primary concern. The detection was measured by amperometric (i-t) signals where PrVO₄/SPCE, as a new electrochemical sensing medium for RXS detection, increased the sensitivity of the sensor to about ∼2.5 folds compared to the previously reported ones. In the concentration range of 0.001-551.78 μM, the suggested PrVO₄/SPCE sensor has a high sensitivity for RXS, with a detection limit of 0.4 nM. Furthermore, the impact of several selected potential interferences, operational stability (2000 s), and reproducibility measurements have no discernible effect on RXS sensing, making it the ideal sensing device feasible for technical analysis. The real-time analysis reveals the excellent efficiency and reliability of the prosed sensor toward RXS detection with favorable recovery ranges between ±97.00-99.66% for chicken, egg, water, and urine samples.

Construction of a Copper Bismuthate/Graphene Nanocomposite for Electrochemical Detection of Catechol

Binary metal oxides with carbon nanocomposites have received extensive attention as research hotspots in the electrochemistry field owing to their tunable properties and superior stability. This work illustrates the development of a facile sonochemical strategy for the synthesis of a copper bismuthate/graphene (GR) nanocomposite-modified screen-printed carbon electrode (CBO/GR/SPCE) for the electrochemical detection of catechol (CT). The formation of an as-prepared CBO/GR nanocomposite was comprehensively characterized. The electrochemical behavior of the CBO/GR/SPCE toward CT was investigated by voltammetry and amperometry techniques. The fabricated CBO/GR/SPCE manifests an excellent electrocatalytic performance toward CT with a lower peak potential and a higher current value compared to those of CBO/SPCE, GR/SPCE, and bare SPCE. It is attributed to enhanced electro-catalytic activity, synergetic effects, and good active sites of the CBO/GR nanocomposite. Under the electrochemical condition, the CBO/GR/SPCE displayed a wide linear sensing range, trace-level detection limit, acceptable sensitivity, and excellent selectivity. Furthermore, our proposed CBO/GR electrode was employed successfully for CT detection in water samples.

Hybrid structures of cobalt-molybdenum bimetallic oxide embedded in flower-like molybdenum disulfide for sensitive detection of the antibiotic drug nitrofurantoin

Excessive residues of nitrofurantoin (NFT) can cause serious contamination of water bodies and food, and potential harm to ecosystems and food safety. Given that, rapid and efficient detection of NFT in real samples is of particular importance. MoS₂ is a promising electrochemical material for this application. Here, MoS₂ was modulated by Metal-organic framework through the interfacial microenvironment to enhance the catalytic activity and carbonized to form Co₂Mo₃O₈ nanosheets with high electrical activity. The resulting Co₂Mo₃O₈/MoS₂ hybrid structure can be used to prepare highly sensitive NFT electrochemical sensor. The Co₂Mo₃O₈/MoS₂@CC electrochemical sensor exhibits strong electrochemical properties due to its fast electron transfer, excellent electrical conductivity, abundant defect sites, and high redox response. Based on this, this electrochemical sensor exhibited excellent electrocatalytic activity for NFT with a wide linear detection range, low detection limit, and high sensitivity. Moreover, the electrode was successfully applied to detect NFT in milk, honey, and tap water, strongly confirming its potential in real samples. This work could furnish the evidence for interfacial microenvironmental regulation of MoS₂, and also offer a novel candidate material for NFT sensing.

Graphene-based electrochemical sensors for antibiotic detection in water, food and soil: A scientometric analysis in CiteSpace (2011-2021)

The residues of antibiotics in the environment pose a potential health hazard, so highly sensitive detection of antibiotics has always appealed to analytical chemists. With the widespread use of new low-dimensional materials, graphene-modified electrochemical sensors have emerged as an excellent candidate for highly sensitive detection of antibiotics. Graphene, its derivatives and its composites have been used in this field of exploration in the last decade. In this review, we have not only described the field using traditional summaries, but also used bibliometrics to quantify the development of the field. The literature between 2011 and 2021 was included in the analysis. Also, the sensing performance and detection targets of different sensors were compared. We were able to trace not only the flow of research themes, but also the future areas of development. Graphene is a material that has a high potential to be used on a large scale in the preparation of electrochemical sensors. How to design a sensor with selectivity and low cost is the key to bring this material from the laboratory to practical applications.

Surfactant-Assisted Synthesis of Praseodymium Orthovanadate Nanofiber-Supported NiFe-Layered Double Hydroxide Bifunctional Catalyst: The Electrochemical Detection and Degradation of Diphenylamine

Physiological storage disorders are caused by ineffective post-harvest handling of horticultural crops, particularly fruits. To address these post-harvest concerns, diphenylamine (DPAH^•+) is widely used as a preservative to prevent fruit degradation and surface scald during storage around the world. Humans are negatively affected by the use of high concentrations of DPAH^•+ because of the various health complications related to its exposure. As a result, accurate detection and quantification of DPAH^•+ residues in treated fruits are critical. Rare earth metal orthovanadates, which have excellent physical and chemical properties, are potential materials for electrochemical sensors in this area. Herein, we present a simple and direct ultrasonication technique for the surfactant-assisted synthesis of praseodymium orthovanadate (PrVO₄ or PrV) loaded on nickel iron layered double hydroxide (NiFe-LDH) synthesized with deep eutectic solvent assistance, as well as its application as an effective catalyst in the detection and degradation of DPAH^•+ in fruits and water samples. The current work presents supreme electrochemical features of a PrV@NiFe-LDH-modified screen-printed carbon electrode (SPCE) where cetyltrimethylammonium bromide (CTAB) surfactant-driven fabrication of PrV directs the formation of highly qualified engineered structures and the deep eutectic solvent based green synthesis of NiFe-LDH creates hierarchical lamellar structures following the principles of green chemistry. PrV and NiFe-LDH combine to produce a synergistic effect that improves the number of active sites, charge transfer kinetics, and electronic conductivity. Differential pulse voltammetry analysis of PrV@NiFe-LDH/SPCE reveals a dynamic working range (0.005-226.26 μM), increased sensitivity (133.13 μA μM^-1 cm^-2), enhanced photocatalytic activity, and low detection limit (0.001 μM), which are considered significant when compared with the former reported electrodes in the literature for the determination of DPAḢ⁺ for its real-time applications.

Novel lanthanum vanadate-based nanocomposite for simultaneously electrochemical detection of dopamine and uric acid in fetal bovine serum

The abnormal levels of two biological molecules, dopamine (DA) and Uric acid (UA), in human body are symptoms of diseases such as Parkinson's disease and arrhythmia. A novel lanthanum vanadate and multi-walled carbon nanotubes (LaV-MWCNTs) composite modified glassy carbon electrode (GCE) was developed and utilized as an efficient electrochemical sensor for the simultaneous detection of DA and UA. LaV-MWCNTs composite was successfully fabricated by a facile ultrasonic self-assembly method and identified by means of a series of successive measurements including XPS, XRD, FT-IR and FE-SEM. The LaV-MWCNTs modified GCE shows the concentration linear ranges of DA and UA are 2-100 μΜ using DPV. The limits of detection (LODs; signal-to-noise ratio of 3, S/N = 3) of the LaV-MWCNTs modified GCE sensor for DA and UA were calculated to be 0.046 μM and 0.025 μM, respectively. The feasibility of using the LaV-MWCNTs modified GCE sensor to detect DA and UA in a typical biological fluid, fetal bovine serum, was also evaluated by the standard addition method.

Selective detection of enrofloxacin in biological and environmental samples using a molecularly imprinted electrochemiluminescence sensor based on functionalized copper nanoclusters

Enrofloxacin (ENR) is a broad-spectrum fungicide that has been largely applied in pharmacy and animal-specific medicine. In this paper, a simple, novel and highly sensitive molecularly imprinted electrochemiluminescence (MIP-ECL) sensor based on mercaptopropionic acid-functionalized copper nanoclusters (MPA-Cu NCs) was developed to selectively detect enrofloxacin (ENR). MPA-Cu NCs prepared by a one-step method were used to modify the glassy carbon electrode. A molecularly imprinted polymer film containing the cavity was constructed after electropolymerization and elution. Under optimized conditions, the MIP-ECL sensor could detect ENR in the range of 0.1 nM-1 μM (R² = 0.9863) with a low limit of detection of 27 pM, and the recovery rates of ENR in biological and lake water samples were 88.20-105.0%. The MIP-ECL sensor provided path to improve the stability issues of Cu NCs, which might open promising avenues to develop new ECL systems for biological analysis and environmental water monitoring.

Phase-dependent photocatalytic selective oxidation of cyclohexane over copper vanadates

Three copper vanadates with different crystal phases show different abilities for selective oxidation of cyclohexane.

Toward the Development of Disposable Electrodes Based on Holmium Orthovanadate/f-Boron Nitride: Impacts and Electrochemical Performances of Emerging Inorganic Contaminants

Rare-earth metal orthovanadates have great technological relevance in the family of rare-earth compounds owing to their excellent physical and chemical properties. A significant number of studies have been carried out on this class of compounds to exploit their electrochemical properties in virtue of variable oxidation states. But holmium vanadate (HoV) and its morphology selective synthesis have not been considered, which can have potential applications similar to the rest of the family. In this work, we propose the synthesis of superior architectures of HoV with a functionalized boron nitride (f-BN) nanocomposite. The synergistic effect between HoV and f-BN can have a positive effect on the physical characteristics of the nanocomposite, which can be explored for its electrochemical capacity. Here, HoV incorporated with f-BN is explored for the electrochemical detection of Hg²⁺ ions, which is known for its toxicity-induced environmental health hazards. The structural and compositional revelation reveals higher conductivity and faster electron transfer in the composite, which facilitates a wide working range (0.02-53.8 and 64.73-295.4 μM), low limit of detection (5 nM), higher sensitivity (66.6 μA μM^-1 cm^-2), good selectivity over 10-fold higher concentration of other interfering compounds compared to Hg²⁺ ion concentration, and good cycles stability (30 segments) toward Hg²⁺ ion detection. This also envisages the morphology selective synthesis and utilization of other rare-earth metals, whose electrochemical capacities are unexplored.

Hierarchical nanoarchitecture of zirconium phosphate/graphene oxide: Robust electrochemical platform for detection of fenitrothion

We report the rational design of nanocomposite with zirconium phosphate encapsulated on graphene oxide (ZrP/GO) for the highly sensitive and selective analysis of fenitrothion (FT). The characteristics of ZrP/GO nanocomposite are systematically analyzed by various in-depth electron microscopic, spectroscopic and analytical techniques. The ZrP/GO nanocomposite modified electrodes show better electrochemical response towards FT than other electrodes. The improved electrochemical activity of nanocomposite is attributed to large surface area, high conductivity, numerous active surface sites, GO nanosheets served as the conductivity matrix while preventing ZrP from agglomeration and the synergistic effect of ZrP and GO. Benefitting from the unique features, our fabricated sensor exhibits the superior performance in terms of wide working range (0.008-26 μM), appropriate peak potential (-0.61 V), low limit of detection (0.001 µM), high sensitivity (6 µA µM^-1 cm^-2) with the regression coefficient of 0.999. Additionally, the electrochemical sensor also displays good selectivity, excellent stability (99.6%), reproducibility (4.9%) and reusability (6.1%). The practical applicability of ZrP/GO sensor is shown by performing the detection of FT in water samples. These results clearly suggest that the ZrP/GO nanocomposite is an efficient electrode material for the future real-time environmental monitoring of FT.

Highly Emissive Metal-Organic Frameworks for Sensitive and Selective Detection of Nitrofuran and Quinolone Antibiotics

The overuse of antibiotics makes its detection very significant for human health. New facile methods and high-performance sensory materials will be urgently needed for detection of antibiotics. Unfortunately, there are few reports on fluorescence enhancement of antibiotics detection. Herein, based on the modulability of the coordination mode, we proposed two MOFs with different coordination modes based on different metal ions: Zn-MOF (1) and Cd-MOF (2). The fluorescence of 1 and 2 can be efficiently and selectively quenched by nitrofuran antibiotics (nitrofurazone, NFZ and furazolidone, FZD) and chloramphenicol (CAP), respectively. Particularly, the matched energy levels between 2 and enrofloxacin (ENR) enables 2 with turn-on sensing for ENR. Moreover, apart from the sensitivity and selectivity, 1 and 2 also have strong recyclable ability, fast response time and anti-interference ability, which make them great potential sensory materials to detect antibiotics.

Recent advances in biosensors for antibiotic detection: Selectivity and signal amplification with nanomaterials

Antibiotics are widely used in the prevention and treatment of infectious diseases in animals due to its bactericidal or bacteriostatic action. Residual antibiotics and their metabolites pose great threats to human and animal health, such as potential carcinogenic and mutagenic effects, and bacterial resistances. Therefore, it is necessary and urgent to accurately monitor trace amounts of antibiotics in food samples. Up to now, many analytical methods have been reported for the determination of antibiotics. Biosensors with the advantages of high sensitivity, rapid response, easy miniaturization, and low price have been widely applied to the detection of antibiotics residues in past decades. This review offered an in-depth evaluation of recognition elements for antibiotic residues in diverse food matrices. In addition, it presented a systematical and critical review on signal amplification via various materials, focusing on recently developed nanomaterials. Finally, the review provided an outlook on the future concepts to help upgrade the sensing techniques for antibiotics in food.

Rational design and preparation of copper vanadate anchored on sulfur doped reduced graphene oxide nanocomposite for electrochemical sensing of antiandrogen drug nilutamide using flexible electrodes

Copper vanadate nanoparticles (Cu₂V₂O₇) are synthesized by using a simple hydrothermal method and later anchored with sulfur-doped reduced graphene oxide (S-rGO) by using ultrasonication to form a hybrid nanocomposite. The synthesized composite underwent characterizations like X-ray diffraction analysis (XRD), Raman spectroscopy, Fourier transform infrared spectroscopy (FT-IR), Dynamic ray scattering-Ultra violet-visible spectroscopy (DRS-UV-visible) and X-ray photoelectron spectroscopically revealed the triclinic pattern of the P 1̅ space group of α-Cu₂V₂O₇ and the reduced oxygen deficiency state of metal centers (Cu⁺ or V⁴⁺) resulting with oxides of mixed-valence oxidative states and forming of Cu-O bond. Morphological analysis was carried out by using transmission electron microscopy (TEM) and Field emission scanning electron microscopy (FE-SEM) with elemental mapping and EDX analysis. Furthermore, a novel electrochemical sensor is prepared by using the hybrid sCu₂V₂O₇/S-rGO nanocomposite on to a disposable screen-printed carbon paste electrode (SPCE) for electrochemical sensing of antiandrogen drug nilutamide (NLT). This report reveals excellent activity in determining NLT with a low detection limit of 0.00459 nM for the linear range of 0.001-15 μM with high sensitivity of 26.2605 µA µM^-1 cm^-2. Further, electrode performance showed appreciable performance in real-time monitoring of biological samples like human blood serum, urine samples.

Construction of strontium phosphate/graphitic-carbon nitride: A flexible and disposable strip for acetaminophen detection

A facile technique has been used to synthesize the strontium phosphate interlinked with graphitic carbon nitride nanosheets (SrP/g-CN NSs) nanocomposite for highly selective detection of acetaminophen (AP). The formation of SrP/g-CN NSs nanocomposite is evidenced by several spectroscopic and analytical methods. It was demonstrated that the SrP/g-CN NSs modified screen-printed carbon electrode (SPCE) exhibits excellent catalytic performance with low peak potential towards AP detection than those of pristine SrP-, g-CN NSs-, and bare- SPCEs. The outstanding electrochemical performance can be attributed to the robust synergistic effect between SrP and g-CN NSs. Likewise, g-CN NSs possess a porous multilayer network, which provides a large surface area, fast charge transferability, electrical conductivity, and numerous active sites. Under the optimal conditions, the fabricated sensor could detect AP with a linear relationship range from 0.01 to 370 µM, and the detection limit is calculated to be as low as 2.0 nM. The proposed sensor is successfully used to determine AP in water samples with satisfactory results.

Nanostructured perovskite type gadolinium orthoferrite decorated RGO nanocomposite for the detection of nitrofurantoin in human urine and river water samples

Nitrofurantoin (NFT) is mainly used in humans for the treatment of urinary tract infections. NFT is used as feed additives in animals, due to its broad antimicrobial activity. However, it shows more side effects on human health and the environment. Therefore low-cost, portable, and rapid sensors are necessary for the detection of NFT in real samples. Herein, we successfully developed an electrochemical sensor using a glassy carbon electrode (GCE) modified with gadolinium orthoferrite (GdFeO₃) decorated on reduced graphene oxide (RGO) nanocomposite for the detection of NFT. The facile hydrothermal method was used to synthesis a novel GdFeO₃/RGO nanocomposite, the morphological and structural characterization was confirmed by the FESEM, HRTEM, EDX, XRD, Raman, and XPS techniques. The formation mechanism of GdFeO₃/RGO nanocomposite had been discussed. The effective intercalation of the nanostructured GdFeO₃ to the RGO sheets leads to the significant enhancement in physicochemical properties such as electrical conductivity, electro-active surface area, structural stability, and electrochemical activity, which was observed from the EIS and CV experimental results. The electrochemical studies established that the developed GdFeO₃/RGO sensor was highly sensitive and selective to NFT. Moreover, the GdFeO₃/RGO sensor exhibits good sensitivity of 4.1985 μA μM^-1 cm^-2, a low detection limit (LOD) of 0.0153 µM and a linear range from 0.001 to 249 µM for NFT detection under optimized experimental conditions. In addition, the investigation of storage time on the CV response of the GdFeO₃/RGO sensor indicates superior stability. Owing to these extraordinary analytical advantages, the as-fabricated sensor was applied to detect the NFT levels in human urine and river water samples with satisfactory results.

Facile Synthesis of Ag/AgVO3/N-rGO Hybrid Nanocomposites for Electrochemical Detection of Levofloxacin for Complex Biological Samples Using Screen-Printed Carbon Paste Electrodes

Silver vanadate nanorods (β-AgVO₃) with silver nanoparticles (Ag-NPs) decorated on the surface of the rods were synthesized by using simple hydrothermal technique and later anchored onto nitrogen-doped reduced graphene oxide (N-rGO) to make a novel nanocomposite. Experimental analyses were carried out to identify the electronic configuration by X-ray diffraction analysis, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy analysis, which revealed monoclinic patterns of the C12/m1 space group with Wulff construction forming beta silver vanadate (β-AgVO₃) crystals with optical density and phase transformations. Ag nucleation showed consistent results with metallic formation and electronic changes occurring in [AgO₅] and [AgO₃] clusters. Transmission electron microscopy and field-emission scanning electron microscopy with elemental mapping and EDX analysis of the morphology reveals the nanorod structure for β-AgVO₃ with AgNPs on the surface and sheets for N-rGO. Additionally, a novel electrochemical sensor is constructed by using Ag/AgVO₃/N-rGO on screen-printed carbon paste electrodes for the detection of antiviral drug levofloxacin (LEV) which is used as a primary antibiotic in controlling COVID-19. Using differential pulse voltammetry, LEV is determined with a low detection limit of 0.00792 nm for a linear range of 0.09-671 μM with an ultrahigh sensitivity of 152.19 μA μM^-1 cm^-2. Furthermore, modified electrode performance is tested by real-time monitoring using biological and river samples.

Hydrothermal architecture of Cu5V2O10 nanostructures as new electro-sensing catalysts for voltammetric quantification of mefenamic acid in pharmaceuticals and biological samples

A novel nano-electrocatalyst based on Cu₅V₂O₁₀ is successfully fabricated by one-pot hydrothermal treatment and used for the examination of mefenamic acid (MFA) in real samples, for the first time. Controlling the combined factors of complexing agent's (4, 4'-Diaminodiphenylmethane, DDM) molar ratio, hydrothermal temperature, and reaction time is responsible for providing the optimal structural and morphological changes of the crystals. The effect of operating conditions of Cu₅V₂O₁₀ nanostructures is investigated using FT-IR, XRD, and EDX as structural and elemental analyses. Also, other properties such as particle size and morphological studies were accomplished by FE-SEM, and HR-TEM. The results reveal that the monoclinic phase of Cu₅V₂O₁₀ with particle size of 34 nm is the outcome of hydrothermal treatment of 200 °C for 18 h, which DDM template with molar ratio of 2.0 M serves as phase stabilizing matrix. Herein, it is demonstrated the electrochemical biosensing characteristics of the nano-scale Cu₅V₂O₁₀ modified carbon paste electrode (CV/CPE) by voltammetry techniques. The drug sensing capabilities of the boosted CV/CPE platform exhibit linear dynamic range of 0.01-470 μM, and low detection limit of 2.34 nM with excellent sensitivity and selectivity. The appropriate electrical conductivity and layered structure of the compound causes a valuable platform for minimally invasive assessment of MFA in biological and pharmaceutical media with recovery rate of 98.3%-110.0% and 93.6%-106.7%, respectively. As a result, the proposed nanostructures as great candidate offer excellent electrocatalytic activity in biomedicine applications.

Integration of samarium vanadate/carbon nanofiber through synergy: An electrochemical tool for sulfadiazine analysis

Antibiotic pollution causes worldwide concern due to its more apparent consequences, namely antibiotic resistance and destruction of the environment. Extensive use of antibiotics in human and veterinary drugs releases a significant amount of toxins into the sphere of living matter, causing adverse ecological impacts. This requires the design of new analytical protocols for the effective mitigation and monitoring of hazardous pharmaceutical products to reduce the environmental burden. Therefore, we present here the hydrothermal synthesis of samarium vanadate/carbon nanofiber (SmV/CNF) composite for the determination of sulfadiazine (SFZ). The synergistic effect arising from the combination of SmV and CNF accelerates charge transfer kinetics along with the creation of more surface-active sites that benefit effective detection. The structural and compositional disclosure indicates the high purity and superior attributes of the composite material that possesses the ability to improve catalytic performance. The proposed SmV/CNF sensor exhibits important static characteristics such as wide linear response ranges, low detection limit, high sensitivity and selectivity, and increased stability. To the best of our knowledge, this is the first report on the electrochemical performance of SmV/CNF, establishing its potential application in real-time analysis of environmentally hazardous contaminants.

Investigation of the bacterial cell envelope nanomechanical properties after long-term exposure to nitrofurans

Antibiotic residues in the environment may negatively affect biological communities in the natural ecosystems. However, their influence on environmental bacterial strains has not been thoroughly investigated. In this study, two representatives of 5-nitrofuran antibiotics (nitrofurantoin and furaltadone) were investigated in terms of their long-term influence on the cell envelopes of newly isolated environmental bacterial strains (Sphingobacterium caeni FTD2, Achromobacter xylosoxidans NFZ2 and Pseudomonas hibiscicola FZD2). A 12-month exposure of bacterial cells to nitrofurans at a concentration of 20 mg L^-1 induced changes in the cell structure and texture (bacteria under stress conditions showed a loss of their original shape and seemed to be vastly inflated, the cells increased average surface roughness after exposure to NFT and FTD, respectively). AFM observations allowed the calculation of the bacterial cell nanomechanical properties. Significant increase in adhesion energy of bacteria after prolonged contact with nitrofurantoin was demonstrated. Changes in the permeability of bacterial membrane, fatty acids' composition and bacterial cell surface hydrophobicity were determined. Despite visible bacterial adaptation to nitrofurans, prolonged presence of pharmaceuticals in the environment has led to significant alterations in the cells' structures which was particularly visible in P. hibiscicola.

Rational Confinement of Yttrium Vanadate within Three-Dimensional Graphene Aerogel: Electrochemical Analysis of Monoamine Neurotransmitter (Dopamine)

Real-time monitoring of neurotransmitter levels is of tremendous technological demand, which requires more sensitive and selective sensors over a dynamic concentration range. As a use case, we report yttrium vanadate within three-dimensional graphene aerogel (YVO/GA) as a novel electrocatalyst for detecting dopamine (DA). This synergy effect endows YVO/GA nanocomposite with good electrochemical behaviors for DA detection compared to other electrodes. Benefiting from tailorable properties, it provides a large specific surface area, rapid electron transfer, more active sites, good catalytic activity, synergic effect, and high conductivity. The essential analytical parameters were estimated from the calibration plot, such as a limit of detection (1.5 nM) and sensitivity (7.1 μA μM^-1 cm^-2) with the YVO/GA sensor probe electrochemical approach. The calibration curve was fitted with the correlation coefficient of 0.994 in the DA concentration range from 0.009 to 83 μM, which is denoted as the linear working range. We further demonstrate the proposed YVO/GA sensor's applicability to detect DA in human serum sample with an acceptable recovery range. Our results imply that the developed sensor could be applied to the early analysis of dementia, psychiatric, and neurodegenerative disorders.

Facile synthesis of Co(ii)-doped cobalt oxide nanostructures: their application in the sensitive determination of the prophylactic drug furazolidone

Electrochemical detection of prophylactic drug furazolidone through Co–Co₂O₄ modified GCE.

Low-Dimension Nanomaterial-Based Sensing Matrices for Antibiotics Detection: A Mini Review

Antibiotics, a kind of secondary metabolite with antipathogen effects as well as other properties, are produced by microorganisms (including bacterium, fungi, and actinomyces) or higher animals and plants during their lives. Furthermore, as a chemical, an antibiotic can disturb the developmental functions of other living cells. Moreover, it is impossible to avoid its pervasion into all kinds of environmental media via all kinds of methods, and it thus correspondingly becomes a trigger for environmental risks. As described above, antibiotics are presently deemed as a new type of pollution, with their content in media (for example, water, or food) as the focus. Due to their special qualities, nanomaterials, the most promising sensing material, can be adopted to produce sensors with extraordinary detection performance and good stability that can be applied to detection in complicated materials. For low-dimensional (LD) nanomaterials, the quantum size effect, and dielectric confinement effect are particularly strong. Therefore, they are most commonly applied in the detection of antibiotics. This article focuses on the influence of LD nanomaterials on antibiotics detection, summarizes the application of LD nanomaterials in antibiotics detection and the theorem of sensors in all kinds of antibiotics detection, illustrates the approaches to optimizing the sensitivity of sensors, such as mixture and modification, and also discusses the trend of the application of LD nanomaterials in antibiotics detection.

Nano assembly of NiFe spheres anchored on f-MWCNT for electrocatalytic reduction and sensing of nitrofurantoin in biological samples

The current study reports a facile simple, low-cost electrochemical sensor in the detection of nitrofurantoin (NFT) by using NiFe/f-MWCNT hybrid composite as a promising electrocatalyst. NFT is an antibiotic drug that is extensively using in pharmaceuticals and also in animal food production which causes a severe threat for both human and animal environments. Extending the residues of NFT are left into rivers, soils, lakes, and groundwaters either found or discharged leading health issues. To this NiFe/f-MWCNT composite was synthesized using a hydrothermal mechanism and then ultrasonicated to form a hybrid composite for catalytic evaluation and electrochemical detection of NFT for the very first time. Furthermore, the physicochemical properties of NiFe nanospheres conjugated on f-MWCNT are scrutinized using various analytical and spectroscopical techniques. Resulting transmission electron microscopy (TEM) displays a chain like NiFe nanospheres anchored on f-MWCNT with a well-defined spherical shape, without any comprehensive agglomeration. The NiFe/f-MWCNT screen printed carbon paste electrode (SPCE) displayed an excellent electrocatalytic activity for NFT with a LOD of 0.03 µM and a sensitivity of 11.45 µA µM^-1 cm^-2. establishing a new selectivity and with the existence of co-interfering compounds. To enhance the practical abilities analysis were performed in Human serum and urine samples which resulted in satisfactory recoveries with high precision and linear accuracy illustrated in Scheme 1.

Highly sensitive electrode materials for the voltammetric determination of nitrofurantoin based on zinc cobaltate nanosheets

Schematic illustration of the electrocatalytic activity of nitrofurantoin (NFT) on ZnCo₂O₄ nanosheets.

Facile synthesis of ultrathin NiSnO3 nanoparticles for enhanced electrochemical detection of an antibiotic drug in water bodies and biological samples

The highly sensitive real-time detection of antibiotic drugs (nitrofurantoin; NFT) has drawn significant research attention due to the extensive use of antibiotics, which may cause serious threats to environment as well as living things.