In-situ construction of Bi/defective Bi4NbO8Cl for non-noble metal based Mott-Schottky photocatalysts towards organic pollutants removal

Self-powered multifunctional platform based on dual-photoelectrode for dual-mode detection and inactivation of Salmonella enteritidis

Self-powered photoelectrochemical (PEC) sensing is a novel sensing modality. The introduction of dual-mode sensing and photoelectrocatalysis in a self-powered system enables both detection and sterilization purposes. To this end, herein, a self-powered multifunctional platform for the photoelectrochemical-fluorescence (PEC-FL) detection and in-situ inactivation of Salmonella enteritidis (SE) was constructed. The platform utilized Bi4NbO8Cl/V2CTx/FTO as a photoanode and CuInS2/FTO as a photocathode and incubated quantum dot (QDs) signaling probes on the surface of the photocathode. During detection, the system drives the transfer of photogenerated electrons between the dual photoelectrodes through the Fermi energy level difference. The photoanode amplifies the photoelectric signal, while the photocathode is solely dedicated to the immune recognition process. QDs provide an additional fluorescence signal to the system. Under optimal experimental conditions, the multifunctional platform achieves detection limits of 3.2 and 5.3 CFU/mL in PEC and FL modes respectively, with a detection range of 2.91 × 102 to 2.91 × 108 CFU/mL. With the application of an external bias voltage, it further promotes electron transfer between the dual photoelectrodes, inhibits the recombination of photogenerated electrons and holes. It generates a significant amount of superoxide radicals (·O2-) in the cathodic region, resulting in strong sterilization efficiency (99%). The constructed self-powered multifunctional platform exhibits high sensitivity and sterilization efficiency, it provides a feasible and effective strategy to enhance the comprehensive capability of self-powered sensors.

Syntheses of heterometallic organic frameworks catalysts via multicomponent postmodification: For improving CO2 photoreduction efficiency

To enhance the economic viability of photocatalytic materials for carbon capture and conversion, the challenge of employing expensive photosensitizer must be overcome. This study aims to improve the visible light utilization with zirconium-based metal-organic frameworks (Zr-MOFs) by employing a multi-component post-synthetic modification (PSM) strategy. An economical photosensitiser and copper ions are introduced into MOF 808 to enhance its photoreduction properties. Notably, the PSM of MOF 808 shows the highest CO yield up to 236.5 μmol g-1 h-1 with aHCOOH production of 993.6 μmol g-1 h-1 under non-noble metal, and its mechanistic insight for CO2 reaction is discussed in detail. The research results have important reference value for the potential application of photocatalytic metal-organic frameworks.

Photocatalytic Enhancement Strategy with the Introduction of Metallic Bi: A Review on Bi/Semiconductor Photocatalysts

Semiconductor photocatalysis has great potential in the fields of solar fuel production and environmental remediation. Nevertheless, the photocatalytic efficiency still constrains its practical production applications. The development of new semiconductor materials is essential to enhance the solar energy conversion efficiency of photocatalytic systems. Recently, the research on enhancing the photocatalytic performance of semiconductors by introducing bismuth (Bi) has attracted widespread attention. In this review, we briefly overview the main synthesis methods of Bi/semiconductor photocatalysts and summarize the control of the micromorphology of Bi in Bi/semiconductors and the key role of Bi in the catalytic system. In addition, the promising applications of Bi/semiconductors in photocatalysis, such as pollutant degradation, sterilization, water separation, CO2 reduction, and N2 fixation, are outlined. Finally, an outlook on the challenges and future research directions of Bi/semiconductor photocatalysts is given. We aim to offer guidance for the rational design and synthesis of high-efficiency Bi/semiconductor photocatalysts for energy and environmental applications.

Wet-chemical intercalation of Bi4TaO8Br with self-adaptive structural deformation for enhanced photocatalytic performance

A small specific surface area and severe charge carrier recombination greatly limit the photocatalytic efficiency of semiconductors. Herein, we developed a novel wet-chemical intercalation strategy by using the NaBH4 reagent for in situ intercalation-assisted expansion and surface/interface reconstruction of Bi4TaO8Br, which exhibits an enhanced specific surface area and charge carrier separation features. This work highlights intercalation of semiconductors for achieving enhanced photocatalytic performance and provides a new idea to synergistically regulate the morphology and surface/interface composition of semiconductors.

Integrating K and P co-doped g-C3N4 with ZnFe2O4 and graphene oxide for S-scheme-based enhanced absorption coupled photocatalytic real wastewater treatment

Recently, there has been a significant increase in the interest of using photocatalysis for environmental clean-up applications. In this research, potassium, and phosphorus co-doped graphitic carbon nitride (KPCN) photocatalyst modified with graphene oxide (GO) and heterostructured with ZnFe₂O₄ was synthesized via the hydrothermal method (KPCN/GO/ZnFe₂O₄). The photoactivity of KPCN/GO/ZnFe₂O₄ photocatalyst was examined for the photocatalytic degradation of target pollutants such as methylene blue (MB) dye, rhodamine B (RhB) dye, and tetracycline (TC) antibiotic. Furthermore, the chemical oxygen demand (COD) removal efficiency for real wastewater was determined to explore the practical application of KPCN/GO/ZnFe₂O₄ photocatalyst. The degradation efficiencies of bare graphitic carbon nitride, KPCN, KPCN/GO, and KPCN/GO/ZnFe₂O₄ photocatalysts for tetracycline antibiotics were 30%, 42%, 57%, and 87% within 60 min, respectively. Moreover, KPCN/GO/ZnFe₂O₄ photocatalyst showed 71% COD removal efficiency within 240 min. The ^•OH and ^•O₂^- were the major reactive species in the photocatalytic process. Results showed that the degradation efficiencies of graphitic carbon nitride were greatly enhanced upon doping and further improved with the addition of GO and ZnFe₂O₄. Doping improved light harvesting, GO enhanced the adsorption ability and heterojunction with ZnFe₂O₄ enhanced the charge separation as well as the reusability of synthesized KPCN/GO/ZnFe₂O₄ photocatalyst.

Pine Dendritic Bi/BiOBr Photocatalyst for Efficient Degradation of Antibiotics

Constructing Bi/BiOX (X = Cl, Br) heterostructures with unique electron transfer channels enables charge carriers to transfer unidirectionally at the metal/semiconductor junction and inhibits the backflow of photogenerated carriers. Herein, novel pine dendritic Bi/BiOX (X = Cl, Br) nanoassemblies with multiple electron transfer channels have been successfully synthesized with the assistance of l-cysteine (l-Cys) through a one-step solvothermal method. Such a pine dendritic Bi/BiOBr photocatalyst shows excellent activity toward the degradation of many antibiotics such as tetracycline (TC), norfloxacin, and ciprofloxacin. In particular, its photocatalytic degradation activity of TC is higher than those of reference spherical Bi/BiOBr, lamellar BiOBr, and BiOBr/Bi/BiOBr double-sided nanosheet arrays. Comprehensive characterizations demonstrate that the pine dendritic structure can construct multiple electron transfer channels from BiOBr to metallic Bi, resulting in an obviously promoted separation efficiency of photogenerated carriers. The synthesis method that uses l-Cys to control the morphology provides a guidance to prepare special metal/semiconductor photocatalysts and would be helpful to design a highly efficient photocatalytic process.

Heterojunction photocatalysts for the removal of nitrophenol: A systematic review

Nitrophenols are the most widely used raw materials in the chemical, pesticide, and pharmaceutical industries. Due to improper waste management and excessive usage, nitrophenol is listed as a priority pollutant and garnered global research attention. This review highlights the recent progress on heterojunction photocatalysts toward eliminating nitrophenols. The detailed mechanisms of the electron-hole pair separation using different heterojunctions such as traditional, p-n, Z-scheme, S-scheme, and Schottky heterojunctions are elaborated. The performance of the photocatalysts is evaluated using quantum efficiency. Among the heterojunctions, Z-scheme exhibited maximum removal efficiency of 100% and found superior over other heterojunctions. Even though heterojunctions exhibit good efficiency, the reusability of the heterojunction photocatalyst is not reported beyond 5 cycles. Further research is indeed to develop a highly reusable photocatalyst for environmental remediation.

Efficient NO removal and photocatalysis mechanism over Bi-metal@Bi2O2[BO2(OH)] with oxygen vacancies

Photocatalysis technology prevails as a feasible option for air pollution control, in which high-efficiency charge separation and effective pollutant activation are the crucial issues. Here, this work designed Bi-metal@ Bi₂O₂[BO₂(OH)] with oxygen vacancies (OVs) catalyst for photocatalytic oxidation of NO under visible light, to shed light on the above two processes. Experimental characterizations and density functional theory (DFT) calculations reveal that a unique electron transfer covalent loop（[Bi₂O₂]²⁺ → Bi-metal → O^2-）can be formed during the reaction to guide the directional transfer of carriers, significantly improving the charge separation efficiency and the yield of active oxygen species. Simultaneously, the defect levels served by OVs also play a part. During the NO purification process, in-situ DRIFTS assisted with DFT calculations reveal that Bi metals could be functioned as electron donors to activate NO molecules and form NO^-, a key intermediate. This induces a new reaction path of NO → NO^- → NO₃^- to achieve the harmless conversion of NO, effectively restraining the generation of noxious intermediates (NO₂, N₂O₄). It is expected that this study would inspire the design of more artful photocatalysts for effective charge transfer and safe pollutants purification.

Z-Scheme Heterojunction of 3-Dimensional Hierarchical Bi3O4Cl/Bi5O7I for a Significant Enhancement in the Photocatalytic Degradation of Organic Pollutants (RhB and BPA)

In this study, we report the synthesis of a 3-dimensional (3D) hierarchical Bi3O4Cl/Bi5O7I (BOC/BOI) heterostructure for the photocatalytic degradation of Rhodamine-B (RhB) dye and colorless Bisphenol-A (BPA) pollutant under visible light. The heterostructure was prepared using in situ solvothermal and calcination methods. BOC/BOI exhibits a 3D hierarchical structure constructed with thin nano-platelets. The photocatalytic performance of the BOC/BOI photocatalyst demonstrated that the degradation efficiencies of RhB and BPA were 97% and 92% after light illumination within 90 and 30 min, respectively. In comparison, bare BOC and BOI efficiencies were only 20% and 10% for RhB dye, respectively, and 2.3% and 37% for BPA aqueous pollutants, respectively. Moreover, radical trapping measurements indicated that •O2- and •OH radicals played prominent roles in RhB and BPA degradation into mineralization. Analysis of band structures and photochemical redox reactions of BOC/BOI revealed a Z-scheme charge transfer between BOC and BOI by an internal electric field formed at the interface. Therefore, the highly improved photocatalytic performance of the BOC/BOI heterostructure is attributed to the synergetic effects of large surface area, high visible-light absorption, and the enhanced separation and transport of photo-excited electron-hole pairs induced by the hierarchical and Z-scheme heterojunction of the BOC/BOI.

Facile Synthesis of Sillén-Aurivillius Layered Oxide Bi7Fe2Ti2O17Cl with Efficient Photocatalytic Performance for Degradation of Tetracycline

The development of an efficient and environment-friendly photocatalyst for antibiotics degradation is of great significance and still remains a major challenge. Herein, a novel Sillén-Aurivillius layered oxide Bi7Fe2Ti2O17Cl is successfully synthesized via a one-step flux route (noted as F-BFTOC) and solid-state reaction (noted as S-BFTOC). The as-prepared F-BFTOC manifests the enhanced visible-light photocatalytic performance towards tetracycline (TC) degradation compared with Bi4NbO8Cl and its degradation efficiency reaches 90% within 90 min. Additionally, the proposed degradation pathway and photocatalytic mechanism are systematically investigated by liquid chromatography tandem-mass spectrometry (HPLC-MS), active species trapping test, electron spin resonance (ESR) and first-principles calculations. The superior degradation of antibiotics is primarily derived from the photo-generated h+, and radical ·O2− as the dominant active species. More importantly, the F-BFTOC exhibits excellent cycle stability and TC is ultimately transformed into non-toxic open-loop products. Simultaneously, Rhodamine B (RhB) as a typical organic pollutant is further employed to evaluate the photocatalytic activity of F-BFTOC, and 98% of the degradation efficiency is achieved. BFTOC as a multifunctional photocatalyst for pollutant degradation offers a new insight for Sillén-Aurivillius photocatalytic in the field of water purification.

Novel Z-scheme binary zinc tungsten oxide/nickel ferrite nanohybrids for photocatalytic reduction of chromium (Cr (VI)), photoelectrochemical water splitting and degradation of toxic organic pollutants

A simple hydrothermal approach was demonstrated for synthesizing a coupled NiFe₂O₄-ZnWO₄ nanocomposite, wherein one-dimensional ZnWO₄ nanorods were inserted into two-dimensional NiFe₂O₄ nanoplates. Herein, we evaluated the photocatalytic removal of Cr(VI), and degradation of tetracycline (TC) and methylene blue (MB) by the nanocomposite, as well as its ability to split water. The ZnWO₄ nanorods enriched the synergistic interactions, upgraded the solar light fascination proficiency, and demonstrated outstanding detachment and migration of the photogenerated charges, as confirmed by a transient photocurrent study and electrochemical impedance spectroscopy measurements. Compared to pristine NiFe₂O₄ and ZnWO_4, the NiFe₂O₄-ZnWO₄ nanocomposite exhibited a higher Cr(VI) reduction (93.5%) and removal of TC (97.9%) and MB (99.6%). Radical trapping results suggested that hydroxyl and superoxide species are dominant reactive species, thereby facilitating the Z-scheme mechanism. Furthermore, a probable photocatalytic mechanism was projected based on the experimental results. The photoelectrochemical analysis confirmed that NiFe₂O₄-ZnWO₄ exhibited minor charge-transfer resistance and large photocurrents. We propose a novel and efficient approach for designing a coupled heterostructured nanocomposites with a significant solar light ability for ecological conservation and water splitting.

Construction of Ag/NaBiO3 with dual active sites for photocatalytic NO deep oxidation and long-lasting organic pollutants degradation in the dark

Ag/NaBiO₃ with dual active sites and high capacitance was prepared by the photo-deposition method. Upon light illumination, the reduction of Ag⁺ to Ag, the introduction of oxygen vacancies, and the electron storage in Ag nanoparticles simultaneously happened. NO, and O₂ adsorbed and activated at Ag site and oxygen vacancy site, respectively, to produce active ON* and •O₂^- radical species. The increased concentrations of the active oxygen species and the pre-oxidation of NO resulted in the enhanced NO removal with inhibited production of NO₂. Moreover, the high capacitance of Ag and the continuous charge transfer from defective NaBiO₃ to Ag offered the enhanced and long-lasting dark catalytic activity of the Ag/NaBiO₃. The stored electrons in Ag were directly released in dark to decompose methyl orange and/or tetracycline. This work provides a novel idea of designing and preparing a multifunctional catalytic material for environmental cleaning.

Supersensitive and reusable perovskite nanocomposite fiber paper for time-resolved single-droplet detection

Traditional test paper cannot be reusable and needs much sample solution. In this study, a reusable perovskite nanocomposite fiber paper consisting of CsPbBr₃ quantum dots in-situ growing in the solid polymer fibers with high concentration is fabricated via microwave and electrospinning methods. RhoB is used as the sample solution because it is a hazardous matter but often occurs in printing and dyeing wastewater or appears in food as additives, and traditional detection system generally requires much sample solution (>1 ml) to concentrate for higher concentrations due to the low detection sensitivity. Just need a droplet of sample solution (<25 μl) can this perovskite fiber paper achieve 0.01 ppm of supersensitive detection, which is superior to a majority of reported detection limit. Different from traditional detection based on luminescence intensity, this detection is a new kind of time-resolved method, so that it gets rid of complex and time-consuming calibration (>1 h) usually in traditional detection, and this time-resolved detection can be achieved within ~3 min. Moreover, this perovskite fiber paper is endowed with recyclable property without losing advantages of supersensitive detection (~0.01 ppm), rapid measuring speed (<3 min), and tiny dosage (<25 μl), which is another advantage than conventional detection systems.

Synergistic effects of oxygen vacancies and the chelation of tetracycline with metallic ions for enhanced degradation of tetracycline over photocatalysts La2−xKxNiMnO6

OVs induced by potassium doping and the chelation of TC with the metallic ions synergistically enhanced photodegradation of TC by La_2−xK_xNiMnO₆ photocatalysts.

Hole Doping to Enhance the Photocatalytic Activity of Bi4NbO8Cl

An increase of carrier concentration is one of the most important routes for enhancing the catalytic performance of semiconductor photocatalysts. In this study, the Sillén–Aurivillius oxychloride Bi4NbO8Cl with hole doping was successfully prepared by a solid-state reaction method. X-ray powder diffraction (XRD), scanning electron microscopy (SEM), ultraviolet–visible diffuse reflectance spectra (UV–vis DRS), X-ray photoelectron spectrometry (XPS) and photoluminescence spectra (PL) were used to characterize and analyze the prepared samples. The experimental results and density functional theory calculations demonstrate that hole doping can be formed in Bi4NbO8Cl by inserting zinc into the niobium site, and the photocatalytic activity can be improved by introducing additional holes into Bi4NbO8Cl. The photogenerated hole (h+) is considered to be the main active species to degrade trypan blue (TB) through trapping experiments. The optimal photocatalyst of Bi4Nb0.8Zn0.2O8Cl exhibits excellent photocatalytic activity in degradation of trypan blue under visible light irritation. Moreover, a possible photocatalytic degradation mechanism is discussed according the experimental and analytical results.