Biofilm development of Bacillus siamensis ATKU1 on pristine short chain low-density polyethylene: A case study on microbe-microplastics interaction

Microplastics in marine systems: A review of sources and sinks, typical environmental behaviors, and biological effects

Marine microplastics (MPs), whether originating from household and industrial production or stemming from the degradation of larger plastic fragments, have currently attracted significant global attention among the scientific community. The transport and deposition of MPs, characterized by their small size and large quantity, under oceanic hydrodynamics result in the contamination of a wide range of areas. Furthermore, MPs are capable of carrying metals and organic pollutants that constitute composite pollutants. The additives it carries will gradually release harmful substances during the degradation process. Once ingested by aquatic organisms and amplified by the food chain, these pollutants can adversely affect the survival and growth of marine flora and fauna, ultimately posing potential threats to humans. In this review, the major sources and sinks of MPs are described, considering the pollution of marine ecosystems. Additionally, typical environmental behaviors of MPs including their migration and accumulation in the ocean, their combined ability with heavy metals and organic pollutants, their leaching of additives, and their abiotic and biotic degradation pathways are discussed. The adverse effects on marine organisms resulting from ingestion and translocation of MPs are also reviewed herein. Even though the number of studies on MPs-associated environmental impacts is increasing rapidly, this review underscores that there is a pressing necessity to achieve an integrated assessment of MPs' impacts on marine ecology in order to address existing and future knowledge gaps.

Comparison of plastisphere microbiomes during the degradation of conventional and biodegradable mulching films

Biodegradable mulch films (BDMs) are becoming increasingly popular in agriculture and are emerging as an alternative to conventional polyethylene (PE) films. However, the intricate details surrounding the establishment and growth of microorganisms on BDMs and PE during their degradation in agricultural fields remain unclear. In this study, the succession of bacterial communities in farmland soil and the plastispheres of PE and BDMs were compared through 16S rRNA gene high-throughput sequencing and real-time PCR. The results unveiled noteworthy distinctions in bacterial community structures across different samples. Specifically, the α-diversity in the BDM plastispheres was markedly lower than in the PE plastisphere. Hydrogenophaga and Variovorax genera were abundantly present in the BDM plastisphere, whereas Mycobacterium demonstrated significant enrichment in the PE plastisphere. Functional annotations indicated high abundances of degradation-related and pathogen-related functions in both BDM and PE plastispheres. Furthermore, the BDM plastisphere exhibited lower network complexity and modularity and stronger competitive interactions than the PE plastisphere. The conducted iCAMP analysis showed that stochastic community assembly processes largely govern the PE plastisphere, while deterministic processes prevailed in BDMs and increased significantly over time. These findings shed light on different mulching materials' effects in farmland ecosystems and provide insights into potential ecological risks linked to their usage.

Biodegradable microplastics adsorb more Cd than conventional microplastic and biofilms enhance their adsorption

Biodegradable polylactic acid (PLA) mulch has been developed to replace conventional polyethylene (PE) mulch in agriculture to reduce plastic pollution and the accumulation of microplastics (MPs) in soil. Cadmium (Cd) is a significant soil contaminant, and can be adsorbed by MPs. It is increasingly recognised that in the natural environment biofilms can develop on MPs and that this can affect their adsorption properties. We exposed PLA and PE mulches outdoors for 16 months. MPs were then generated from pristine and weathered mulches. Biofilms developed on the weathered plastics. Oxygen-containing functional groups were detected on the weathered, but not the pristine PE, abundance of these groups increased for the weathered PLA. After removal of the biofilm the observed increases in oxygen-containing functional groups relative to the pristine plastics remained. In adsorption experiments pristine PLA MPs had a greater maximum adsorption capacity than pristine PE MPs (106-126 vs 23.2 mg/kg) despite having a lower specific surface area (0.325 m2/g vs 1.82 m2/g) suggesting that the greater levels of adsorption were due to MP chemistry. The weathered plastics adsorbed more Cd than the pristine plastics (e.g. maximum adsorption capacities of 153-185 and 152 mg/kg for the weathered PLA and PE respectively). However, after removal of the biofilm, adsorption of Cd to the weathered MPs was no greater than for the pristine plastics. This suggests that the increased adsorption of Cd due to weathering was caused primarily by adsorption onto the biofilm.

Recent progresses and perspectives of polyethylene biodegradation by bacteria and fungi: A review

Plastics pollution has become a serious threat to the people and environment due to the mass production, unreasonable disposal and continuous pollution. Polyethylene (PE), one of the most utilized plastics all over the world, is considered as a highly recalcitrant environmental destruction problem on account of strong hydrophobicity and high molecular weight. Therefore, it is urgently necessary to seek economical and efficient treatment and disposal methods for PE. Considering microorganisms can use various carbon sources for anabolism, they are recognized to have great potential in the biodegradation of microplastics including PE. From this point of view, the present review concentrates on providing information regarding the current status of PE biodegradation microorganisms (bacteria and fungi), and the influencing factors such as PE characteristics, cellular surface hydrophobicity, physical treatments, chemicals addition, as well as environmental conditions for biodegradation are thoroughly discussed. Furthermore, the possible biodegradation mechanisms for PE involve the biofilm formation, biodeterioration, fragmentation, assimilation, and mineralization are elucidated in detail. Finally, the future research directions and application prospects of microbial degradation are prospected in this review. It is expected to provide reference and guidance for PE biodegradation and their potential applications in real contaminated sites.

Direct evidence for selective microbial enrichment with plastic degradation potential in the plastisphere

Plastisphere, characterized by microbial colonization on plastic debris, has attracted concern with its adverse environmental effects. The microbial features have been increasingly investigated; however, there lacks direct evidence for microplastics serving as carbon sources and enriching plastic-degrading microorganisms. Here, we obtained microbial communities from soil microplastics, analyzed the dissimilarity compared with soil, and characterized the plastic-degrading potential of isolates from plastisphere. Results showed the plastisphere communities significantly differed from soil communities and exhibited a higher relative abundance of Nocardia and Rhodococcus. To verify the selective enrichment of plastic-degrading microorganisms in the plastisphere, culture-based strategies were employed to evaluate the polyethylene (PE) degradation potential of two isolates Nocardia asteroides No.11 and Rhodococcus hoagii No.17. They could grow solely on PE and led to significant weight loss. FTIR and SEM analysis revealed the formation of new functional groups and the destruction of structural integrity on PE surfaces. Genes related to PE biodegradation were identified by genome-wide sequencing thus recognizing relevant enzymes and elucidating potential pathways. Overall, this report combined culture-free and culture-based approaches to confirm the plastic degradation potential of selectively enriched microorganisms in soil plastisphere, providing a positive perspective toward promoting microplastic biodegradation in farmland soil by enhancing natural microbial processes.

Microplastics-biofilm interactions in biofilm-based wastewater treatment processes: A review

Microplastics, pervasive contaminants from plastic, present significant challenges to wastewater treatment processes. This review critically examines the interactions between microplastics and biofilm-based treatment technologies, specifically focusing on the concepts of "biofilm on microplastics" and "microplastics in biofilm". It discusses the implications of these interactions in contaminant removal and process performance. Advanced characterization techniques, including morphological characterization, chemical composition analysis, and bio-information analysis, are assessed to elucidate the complex interplay between microplastics and biofilms within biofilters, biological aerated filters (BAFs), rotating biological contactors (RBCs), and moving bed biofilm reactors (MBBRs). This review synthesizes current research findings, highlighting that microplastics can either hinder or enhance the treatment processes, contingent on their concentration, physicochemical properties, and the specific biofilm technology employed. The insights gained from this review are essential for developing strategies to mitigate the adverse effects of microplastics and for optimizing the design and operation of wastewater treatment.

Assessment of biodegradation and toxicity of alternative plasticizer di(2-ethylhexyl) terephthalate: Impacts on microbial biofilms, metabolism, and reactive oxygen species-mediated stress response

Although di(2-ethylhexyl) terephthalate (DOTP) is being widely adopted as a non-phthalate plasticizer, existing research primarily focuses on human and rat toxicity. This leaves a significant gap in our understanding of their impact on microbial communities. This study assessed the biodegradation and toxicity of DOTP on microbes, focusing on its impact on biofilms and microbial metabolism using Rhodococcus ruber as a representative bacterial strain. DOTP is commonly found in mass fractions between 0.6 and 20% v/v in various soft plastic products. This study used polyvinyl chloride films (PVC) with varying DOTP concentrations (range 1-10% v/v) as a surface for analysis of biofilm growth. Cell viability and bacterial stress responses were tested using LIVE/DEAD™ BacLight™ Bacterial Viability Kit and by the detection of reactive oxygen species using CellROX™ Green Reagent, respectively. An increase in the volume of dead cells (in the plastisphere biofilm) was observed with increasing DOTP concentrations in experiments using PVC films, indicating the potential negative impact of DOTP on microbial communities. Even at a relatively low concentration of DOTP (1%), signs of stress in the microbes were noticed, while concentrations above 5% compromised their ability to survive. This research provides a new understanding of the environmental impacts of alternative plasticizers, prompting the need for additional research into their wider effects on both the environment and human health.

Colonization characteristics and surface effects of microplastic biofilms: Implications for environmental behavior of typical pollutants

This paper summarizes the colonization dynamics of biofilms on microplastics (MPs) surfaces in aquatic environments, encompassing bacterial characteristics, environmental factors affecting biofilm formation, and matrix types and characteristics. The interaction between biofilm and MPs was also discussed. Through summarizing recent literatures, it was found that MPs surfaces offer numerous benefits to microorganisms, including nutrient enrichment and enhanced resistance to environmental stress. Biofilm colonization changes the surface physical and chemical properties as well as the transport behavior of MPs. At the same time, biofilms also play an important role in the fragmentation and degradation of MPs. In addition, we also investigated the coexistence level, adsorption mechanism, enrichment, and transformation of MPs by environmental pollutants mediated by biofilms. Moreover, an interesting aspect about the colonization of biofilms was discussed. Biofilm colonization not only had a great effect on the accumulation of heavy metals by MPs, but also affects the interaction between particles and environmental pollutants, thereby changing their toxic effects and increasing the difficulty of MPs treatment. Consequently, further attention and research are warranted to delve into the internal mechanisms, environmental risks, and the control of the coexistence of MPs and biofilms.

Effects of photoaging on structure and characteristics of biofilms on microplastic in soil: Biomass and microbial community

Understanding of the environmental behaviors of microplastics is limited by a lack of knowledge about how photoaging influences biofilm formation on microplastics in soil. Here, original microplastics (OMPs) and photoaged-microplastics (AMPs) were incubated in soil to study the effect of photoaging on formation and characteristics of biofilm on the poly (butylene succinate) microplastics. Because photoaging decreased the hydrophobicity of the microplastic, the biomass of biofilm on the OMPs was nearly twice that on the AMPs in the early stage of incubation. However, the significance of the substrate on biomass in the biofilm declined as the plastisphere developed. The bacterial communities in the plastisphere were distinct from, and less diverse than, those in surrounding soil. The dominant genera in the OMPs and AMPs plastispheres were Achromobacter and Burkholderia, respectively, indicating that photoaging changed the composition of the bacterial community of biofilm at the genus level. Meantime, photoaging decreased the complexity and stability of the plastisphere bacterial community network. Results of Biolog ECO-microplate assays and functional prediction from amplicons showed that photoaging treatment enhanced the carbon metabolic capacity of the microplastic biofilm. This study provides new insights into the formation of plastispheres in soil.

Leaching of chemicals from microplastics: A review of chemical types, leaching mechanisms and influencing factors

It is widely known that microplastics are present everywhere and they pose certain risks to the ecosystem and humans which are partly attributed to the leaching of additives and chemicals from them. However, the leaching mechanisms remain insufficiently understood. This review paper aims to comprehensively and critically illustrate the leaching mechanisms in biotic and abiotic environments. It analyzes and synthesizes the factors influencing the leaching processes. It achieves the aims by reviewing >165 relevant scholarly papers published mainly in the past 10 years. According to this review, flame retardants, plasticizers and antioxidants are the three main groups of additives in microplastics with the potentials to disrupt endocrine functions, reproduction, brain development and kidney functions. Upon ingestion, the MPs are exposed to digestive fluids containing enzymes and acids which facilitate their degradation and leaching of chemicals. Fats and oils in the digestive tracts also aid the leaching and transport of these chemicals particularly the fat-soluble ones. Leaching is highly variable depending on chemical properties and bisphenols leach to a larger extent than other endocrine disrupting chemicals. However, the rates of leaching remain poorly understood, owing probably to multiple factors at play. Diffusion and partitioning are two main mechanisms of leaching in biotic and abiotic environments. Photodegradation is more predominant in the latter, generating reactive oxygen species which cause microplastic aging and leaching with minimal destruction of the chemicals leached. Effects of microplastic sizes on leaching are governed by Sherwood number, thickness of aqueous boundary layer and desorption half-life. This review contributes to better understanding of leaching of chemicals from microplastics which affect their ecotoxicities and human toxicity.

Microplastics influence on herbicides removal and biosurfactants production by a Bacillus sp. strain active against Fusarium culmorum

The amounts of anthropogenic pollutants, e.g., microplastics (MPs) and pesticides, in terrestrial and aquatic ecosystems have been increasing. The aim of this study was to assess the influence of MPs on the removal of herbicides (metolachlor, MET; 2,4-dichlorophenoxyacetic acid, 2,4-D) and the production of biosurfactants (surfactin and iturin) by Bacillus sp. Kol L6 active against Fusarium culmorum. The results showed that Kol L6 eliminated 40-55% MET and 2,4-D from liquid cultures, but this process was inhibited in the presence of MPs. Although the pollutants did not strongly limit the production of surfactin, iturin secretion was found to decrease by more than 70% in the presence of all three pollutants. Interestingly, the strongest modification in the profile of iturin homologues was calculated for the cultures containing MET + MP and 2,4-D + MET + MP. The bacteria significantly limited the growth of the phytopathogenic F. culmorum DSM1094F in the presence of individual pollutants and their two-component mixtures. However, in the presence of all three tested pollutants, the growth of the fungus was limited only partially (by no more than 40%). The presented results are a starting point for further research on bacteria-fungi-plants interactions in the soil environment in the presence of multiple pollutants.

Biodegradable mulch films significantly affected rhizosphere microbial communities and increased peanut yield

Biodegradable mulch films are widely used to replace conventional plastic films in agricultural fields. However, their ecological effects on different microbial communities that naturally inhabit agricultural fields are scarcely explored. Herein, differences in bacterial communities recovered from biofilms, bulk soil, and rhizosphere soil were comparatively assessed for polyethylene film (PE) and biodegradable mulch film (BDM) application in peanut planted fields. The results showed that the plastic film type significantly influenced the bacterial community in different ecological niches of agricultural fields (P < 0.001). Specifically, BDMs significantly increased the diversity and abundance of bacteria in the rhizosphere soil. The bacterial communities in each ecological niche were distinguishable from each other; bacterial communities in the rhizosphere soil showed the most pronounced response among different treatments. Acidobacteria and Pseudomonas were significantly enriched in the rhizosphere soil when BDMs were used. BDMs also increased the rhizosphere soil bacterial network complexity and stability. The enrichment of beneficial bacteria in the rhizosphere soil under BDMs may also have implications for the observed increase in peanut yield. Deepening analyses indicated that Pseudoxanthomonas and Glutamicibacter are biomarkers in biofilms of PE and BDMs respectively. Our study provides new insights into the consequences of the application of different types of plastic films on microbial communities in different ecological niches of agricultural fields.

Bioremediation of microplastics in freshwater environments: A systematic review of biofilm culture, degradation mechanisms, and analytical methods

Microplastics, defined as particles <5 mm in diameter, are emerging environmental pollutants that pose a threat to ecosystems and human health. Biofilm degradation of microplastics may be an ecologically friendly approach. This review systematically summarises the factors affecting biofilm degradation of microplastics and proposes feasible methods to improve the efficiency of microplastic biofilm degradation. Environmentally insensitive microorganisms were screened, optimized, and commercially cultured to facilitate the practical application of this technology. For strain screening, technology should focus on microorganisms/strains that can modify the hydrophobicity of microplastics, degrade the crystalline zone of microplastics, and metabolise additives in microplastics. The biodegradation mechanism is also described; microorganisms secreting extracellular oxidases and hydrolases are key factors for degradation. Measuring the changes in molecular weight distribution (MWD) enables better analysis of the biodegradation behaviour of microplastics. Biofilm degradation of microplastics has relatively few applications because of its low efficiency; however, enrichment of microplastics in freshwater environments and wastewater treatment plant tailwater is currently the most effective method for treating microplastics with biofilms.

UV stabilizers can foster early development of biofilms on freshwater microplastics

Interactions between microbes and microplastics are important as of emerging plastic loads in the global environment. Although diverse plastic additives are used in large amounts, there are very few studies on a quantitative comparison of plastisphere on plastics with different plastic additives. We studied the effects of two widely used UV stabilizers (benzotriazole-type UV-327 and benzophenone-type UV-531 were selected based on their persistence and toxicity) in low-density polyethylene (LDPE) on freshwater microbes. This is the first study on the sole effects of UV stabilizers used as plastic additives on freshwater in situ plastisphere biofilm development. Confocal laser scanning microscopy, assisted with proper differentiating fluorochromes and threshold-based 3D segmentation of data, was used to visualize and quantify biofilm. On the first week of biofilm growth, there was very little biovolume and a negligible amount of phototrophs on pristine LDPE contrasting other substrates. Biovolumes were significantly higher on LDPE with UV stabilizers (up to 159% higher than pristine LDPE), although the biomass was mostly dead due to toxicity (>100% higher dead biovolume than live biovolume in LDPE with UV stabilizers). After the fourth week, marginally higher biovolumes along with a revival of the biomass on LDPE with UV stabilizers were observed. The ability to induce microorganismic intracellular reactive oxygen species by UV stabilizers was detected, which may stimulate biofilm growth during the primary phase of biofilm development. Atomic force microscopy analysis denoted that LDPE with UV stabilizers exhibit considerably stronger adhesion force than pristine LDPE. These observations suggest that UV stabilizers can foster the early attachment of microbes to microplastics while killing the surface contacting layer. An alive upper layer of microbes can get developed on the dead biofilm without much disruption due to the toxicity of UV stabilizers. This occurrence can eventually boost the early development of biofilms on plastics.

Insight into biofilm-forming patterns: biofilm-forming conditions and dynamic changes in extracellular polymer substances

The microbial biofilm adheres to the surface of the carrier, which protects the pollutant-degrading bacteria and resists harsh environments; thus, research on biofilm-forming patterns will help promote the application of biofilms in wastewater treatment. Herein, univariate analysis and response surface methodology (RSM) confirmed that glucose and mannose at 3-5 g/L promoted biofilm formation. Notably, the microplate method demonstrated that compared to trivalent cations, divalent cations could more greatly enhance the activity (especially magnesium) of the biofilm matrix, and the period of biofilm formation in the three strains was divided into the following stages: initial attachment (0-10 h), microcolony (10-24 h), maturation (24-48 h), and dispersion (36-72 h). During maturation, large amounts of extracellular polysaccharides (EPs) and extracellular DNA (eDNA) were distributed in the extracellular and intracellular spaces, respectively, as observed by super-resolution structured illumination microscopy (SR-SIM). This study enhances the understanding of the characteristics and patterns of biofilm formation and can facilitate the application of biofilms in wastewater treatment.

The Raman spectroscopy and SEM/EDS investigation of the primary sources of microplastics from cosmetics available in Poland

The increasing amount of marine microplastics and nanoplastics is due to primary (P-MPs) and secondary sources (S-MPs). Among small P-MPs and fibres from textiles, nurdles or industrial dust, the microbeads from cosmetics (peelings, scrubs) are dominant. The polyethylene and polypropylene debris, already <5 mm, enlarge Plastisphere and have a complex influence on environmental processes. Fortunately, the situation has changed with the limitation of synthetic materials in scrubs in recent years. This paper summarizes the six years of studies (2015-2021) on microplastics in cosmetics available on the Polish market. It focuses on those still available and presents the potential of Raman spectroscopy for the efficient qualitative and quantitative characterization of those materials. Finally, surface morphology's vital role in microplastics' general behaviour is underlined. The SEM/EDX and numerical modelling enables a more detailed description of particles.

Ecotoxicological and health implications of microplastic-associated biofilms: a recent review and prospect for turning the hazards into benefits

Microplastics (MPs), over the years, have been regarded as a severe environmental nuisance with adverse effects on our ecosystem as well as human health globally. In recent times, microplastics have been reported to support biofouling by genetically diverse organisms resulting in the formation of biofilms. Biofilms, however, could result in changes in the physicochemical properties of microplastics, such as their buoyancy and roughness. Many scholars perceived the microplastic-biofilm association as having more severe consequences, providing evidence of its effects on the environment, aquatic life, and nutrient cycles. Furthermore, other researchers have shown that microplastic-associated biofilms have severe consequences on human health as they serve as vectors of heavy metals, toxic chemicals, and antibiotic resistance genes. Despite what is already known about their adverse effects, other interesting avenues are yet to be fully explored or developed to turn the perceived negative microplastic-biofilm association to our advantage. The major inclusion criteria for relevant literature were that it must focus on microplastic association biofilms, while we excluded papers solely on biofilms or microplastics. A total of 242 scientific records were obtained. More than 90% focused on explaining the environmental and health impacts of microplastic-biofilm association, whereas only very few studies have reported the possibilities and opportunities in turning the microplastic biofilms association into benefits. In summary, this paper concisely reviews the current knowledge of microplastic-associated biofilms and their adverse consequences and further proposes some approaches that can be developed to turn the negative association into positive.

Toxicity of tire wear particles and the leachates to microorganisms in marine sediments

Tire wear particles (TWPs), which are among the microplastic pollutants in the environment, can inevitably accumulate in coastal sediments. The present study comprehensively investigated the effect of pristine TWPs on bacterial community structure in coastal sediments and compared the effect of pristine TWPs and aged TWPs on nine strains of bacteria in sediments. In addition, the effect of the TWP leachate was studied with all the nine bacterial strains and the toxicity-causing substances in the leachate was investigated using Bacillus subtilis. Exposure to TWPs could lead to a shift in bacteria community and affect nitrogen metabolism in marine sediments. Aged TWPs were more toxic than pristine TWPs due to changes in particle surface characteristics. The leachate exhibited greater toxicity than TWPs as well, and Zn was identified to be the major toxicity-causing substance. The overall results of this study are important for understanding the effects of TWPs and the leachates on microorganisms in marine sediments.

Cyclic AMP and biofilms reveal the synergistic proliferation strategy of Pseudomonas aeruginosa and Escherichia coli under the costimulation of high concentrations of microplastics and enrofloxacin

Microplastics (MPs) provide attachment sites for biofilm formation of microorganisms, which can promote their resistance to environmental stress has been proved. However, the effect of MPs on synergy survival among microorganisms under antibiotic stress remains unclear. In the present study, the proliferation of Escherichia coli and Pseudomonas aeruginosa was assessed under enrofloxacin stress with the influence of MPs. Here, MPs reduced the growth speed of E. coli and enhanced that of P. aeruginosa, especially at 12 h, but the final value of OD₆₀₀ and CFU of both bacteria not be influenced. E. coli was enrofloxacin sensitive (MIC = 0.25 μg/mL), and a high MP concentration in the presence of enrofloxacin notably enhanced the biofilm formation ability of P. aeruginosa, but proliferation decreased. In the coculture system, the proliferation of E. coli (increased 1.42-fold) and P. aeruginosa (increased 1.06-fold) both increased under enrofloxacin stress (0.25 μg/mL) with high-concentration MP addition. P. aeruginosa may provide the biofilm matrix for E. coli to resist the stress of enrofloxacin. The high concentration of cyclic AMP secreted by E. coli may slightly inhibited biofilm formation, leading to a decrease in the fitness cost of P. aeruginosa; thus, the proliferation of P. aeruginosa increased. The present study is the first to show that MP combined with antibiotics stimulates the metabolic cooperation of bacteria to promote proliferation.

Cadmium tolerant microbial strains possess different mechanisms for cadmium biosorption and immobilization in rice seedlings

Heavy metal remediation, such as cadmium (Cd²⁺) by microbial strains is efficient and environment-friendly. In this current study, we exploited the potential of Bacillus strains (Cd²⁺-tolerant; NMTD17, GBSW22, and LLTC96) to regulate Cd²⁺ biosorption mechanisms and improve rice seedling growth. The results showed that initial concentration and contact time affected Cd²⁺ biosorption, and the kinetic models of pseudo orders were effective in the elaborate biosorption process. Mainly, the bacterial cell wall had the potential for Cd²⁺ biosorption, and we found non-significant biosorption alterations among bacterial strains' inner and outer surfaces of cell membranes. Furthermore, the Fourier transform infrared (FTIR) spectroscopy analysis identified the differences in functional groups, such as C-N, PO₂, -SO₃, CO, COOH, C-O, C-N, -OH, and -NH that interact in biosorption by Bacillus strains. The scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) examination revealed that the binding of Cd²⁺ to microbes was mostly based on ion exchange pathways. Moreover, the Bacillus strains responded to Cd²⁺ stress in rice under pot experiment at various concentrations (0, 0.25, and 0.50 mg kg^-1), and they also influenced the chlorophyll contents and antioxidants activities were studied. The analysis of physio-morphological parameters was observed to be increased, which indicated that all Bacillus strains showed significant effects on rice growth under Cd²⁺ stress. These results revealed that the selected strains had the capability for additional use in the development of Cd²⁺ bioremediation methods. These strains also provided plant growth-promoting (PGP) traits that can alleviate the harmful effects of Cd²⁺ in rice plants.

Leaching of microplastic-associated additives in aquatic environments: A critical review

Microplastic pollution has attracted significant attention as an emerging global environmental problem. One of the most important issues with microplastics is the leaching of harmful additives. This review summarizes the recent advances in the understanding of the leaching phenomena in the context of the phase equilibrium between microplastics and water, and the release kinetics. Organic additives, which are widely used in plastic products, have been introduced because they have diverse physicochemical properties and mass fractions in plastics. Many theoretical and empirical models have been utilized in laboratory and field studies. However, the partition or distribution constant between microplastics and water (K_p) and the diffusivity of an additive in microplastics (D) are the two key properties explaining the leaching equilibrium and kinetics of hydrophobic organic additives. Because microplastics in aquatic environments undergo dynamic weathering, leaching of organic additives with high K_p and/or low D cannot be described by a leaching model that only considers microplastic and water phases with a fixed boundary. Surface modifications of microplastics as well as biofilms colonizing microplastic surfaces can alter the leaching equilibrium and kinetics and transform additives. Further studies on the release of hydrophobic organic additives and their transformation products under various conditions are required to extend our understanding of the environmental fate and transport of these additives in aquatic environments.

Aging of biodegradable blended plastic generates microplastics and attached bacterial communities in air and aqueous environments

The use of biodegradable plastics (BPs) has been widely promoted in recent years, but before their complete degradation, the phase of microplastics (MPs) is inevitable. However, little information concerning the production of MPs from blended polymers is available. This study aimed to explore the characteristics of MPs produced from blended plastics and the development of biofilms on plastic surfaces under long-term aging. Here, three blended materials (i.e., PBAT (53%)+PLA (10%)+Starch (20%), PBAT (80%)+Starch (20%), HDPE (60%)+CaCO₃ (40%)) were aged for 90 days in air, deionized (DI) water and seawater. The results showed massive production of MPs (9653 ± 3920-20,348 ± 5857 items/g) from blended plastics accompanied by a large quantity of flocculent substances during 90 days aging period. Furthermore, the richness of bacteria communities on hydrophobic plastics (i.e., PBAT (53%)+PLA (10%)+Starch (20%), PBAT (80%)+Starch (20%)) was higher than hydrophilic plastics (i.e., HDPE (60%)+CaCO₃ (40%)), and bacterial communities attached to blended plastics exhibited significantly variation with aging times. Overall, promoting the marketable application of blended plastics is risky if their environmental behavior is not effectively addressed.

Differential staining lowers the false positive detection in a novel volumetric measurement technique of microplastics

A novel method for the volumetric detection of microplastics in various environmental (soil, water) and food (fish, meat) matrices was developed. The method is based on the Nile Red staining of microplastics while eliminating probable interference by other organic polymers such as lignin, chitin, cellulosic materials, and other organic substances using a mixture of three water-based dyes (Calcofluor White, Evans Blue, and 4,6-diamidino-2-phenylindole [DAPI]). The excitation/emission 'sweet spot' was determined for water based blue dyes to detect them in a single channel for effective elimination of probable contaminations. Detection of microplastic particles using the Nile Red method was validated by comparing with traditional detection of microplastics via Fourier transform infrared spectroscopy (FTIR). Volumetric measurements of the microplastics present in environmental samples were made possible using Z-stack confocal microscopy images backed by threshold-based 3D segmentation. Regularly shaped microplastic materials were used to validate the volumetric measurement method. The proposed volumetric determination method will be very useful for screening microplastics in diverse media and improving the prevailing method using FTIR.

Exposure of Goniopora columna to polyethylene microplastics (PE-MPs): Effects of PE-MP concentration on extracellular polymeric substances and microbial community

Although the pollution of coral reefs by microplastics (MPs) is an environmental problem of global significance, the effects of MP concentration on scleractinian corals remain largely underexplored. Herein, we exposed a representative scleractinian coral (Goniopora columna) to different concentrations (5-300 mg L^-1) of polyethylene microplastics (PE-MPs; 40-48 μm) over seven days and evaluated the changes in microbial community and extracellular polymeric substances (EPS) using fluorescence excitation-emission matrix spectroscopy and amplicon sequence variants (ASV). At a PE-MP concentration of 300 mg L^-1, the relative abundance of Bacillus (Firmicutes phylum) and Ruegeria (Proteobacteria phylum) in PE-MP-associated EPS increased and decreased, respectively, while the effects of exposure depended on the particle size of the extracellular polymeric substance (EPS)-based matrix and the humification index. Humic- and fulvic-like substances were identified as critical EPS components produced by microbial activity. The results have shed new insights into short-term responses of G. columna during exposure to different PE-MP concentrations and reveal important coral-MP-microbiome interactions in coral reef ecosystems. Results demonstrated that the coral-MPs interactions should be further evaluated to gain a deeper understanding of the underlying ecotoxicological risks.

Microplastics can selectively enrich intracellular and extracellular antibiotic resistant genes and shape different microbial communities in aquatic systems

Microplastics (MPs), as emerging contaminants, are posing potential risks to environment, and animal and human health. The ubiquitous presence of MPs in natural ecosystems provides favorable platform to selectively adsorb antibiotic resistant genes (ARGs) and bacteria (ARB) and bacterial assemblages, especially in wastewater which is hotspot for MPs, ARGs and ARB. In this study, the selective capture of intracellular ARGs (iARGs), extracellular ARGs (eARGs), and bacterial assemblages by MPs with different materials (i.e. polyethylene, polyvinylchloride, and polyethylene terephthalate) and sizes (200 μm and 100 μm) was investigated. The results showed that iARGs (i.e. i-TetA, i-TetC, i-TetO, i-sul1), integron-integrase gene (intI1), and eARGs (i.e. e-TetA and e-bla_TEM) were selectively enriched on MPs. Relative abundances of i-sul1, i-TetA, and intI1 were generally higher than that of i-TetC and i-TetO on all MPs. Moreover, MPs also have strong effects on the formation of microflora in wastewater, which resulted in different bacterial communities and functions in the wastewater and on the MPs. These findings suggested that MPs could affect the selective enrichment of ARB and ARGs in water environment.

Equilibrium leaching of selected ultraviolet stabilizers from plastic products

Despite the importance of (micro)plastics in the release of plastic additives, the leaching mechanism of organic plastic additives from various plastic materials is poorly understood. In this study, the equilibrium leaching of five highly hydrophobic ultraviolet (UV) stabilizers (UV326, UV327, UV328, UV329, and UV531) from three plastics (low-density polyethylene (LDPE), polyethylene terephthalate (PET), and polystyrene (PS)), was investigated employing acetonitrile-water cosolvent systems. Their extrapolated water solubilities were in the 0.15-0.54 μg L^-1 range, limiting their transport as "dissolved" in water and (micro)plastics are likely those particulate carriers. The equilibrium leaching of UV stabilizers from plastics was better explained by the Flory-Huggins model incorporating the nonideal behavior caused by the size disparity between UV stabilizers and polymer materials and their compatibility. Specifically, leaching of UV stabilizers from LDPE showed a positive deviation from Raoult's law, whereas slight negative deviations were observed in PET and PS. In addition, the equilibrium concentration of the benzotriazoles in LDPE increased linearly with the volume fraction up to only 0.4%. These observations could be explained by the unfavorable interactions of UV stabilizers with polyethylene, indicating that polymer type should be also important when evaluating the fate of hydrophobic additives. Because equilibrium distribution of additives between (micro)plastics and water is crucial for evaluating the fate and transport of hydrophobic plastic additives, further studies on the leaching equilibrium of various additives from different plastic materials are necessary.

Microplastic-associated pathogens and antimicrobial resistance in environment

The ubiquitous use of microplastics and their release into the environment especially the water bodies by anthropogenic/industrial activities are the major resources for microplastic contamination. The widespread and often injudicious use of antimicrobial drugs or antibiotics in various sectors including human health and hygiene, agriculture, animal husbandry and food industries are leading to the release of antibiotics into the wastewater/sewage and other water bodies, particularly in urban setups and thus leads to the antimicrobial resistance (AMR) in the microbes. Microplastics are emerging as the hubs as well as effective carriers of these microbial pathogens beside their AMR-genes (ARGs) in marine, freshwater, sewage/wastewater, and urban river ecosystems. These drug resistant bacteria interact with microplastics forming synthetic plastispheres, the ideal niche for biofilm formations which in turn facilitates the transfer of ARGs via horizontal gene transfer and further escalates the occurrence and levels of AMR. Microplastic-associated AMR is an emerging threat for human health and healthcare besides being a challenge for the research community for effective management/address of this menace. In this review, we encompass the increasing prevalence of microplastics in environment, emphasizing mainly on water environments, how they act as centers and vectors of microbial pathogens with their associated bacterial assemblage compositions and ultimately lead to AMR. It further discusses the mechanistic insights on how microplastics act as hosts of biofilms (creating the plastisphere). We have also presented the modern toolbox used for microplastic-biofilm analyses. A review on potential strategies for addressing microplastic-associated AMR is given with recent success stories, challenges and future prospects.

Nanomechanical Atomic Force Microscopy to Probe Cellular Microplastics Uptake and Distribution

The concerns regarding microplastics and nanoplastics pollution stimulate studies on the uptake and biodistribution of these emerging pollutants in vitro. Atomic force microscopy in nanomechanical PeakForce Tapping mode was used here to visualise the uptake and distribution of polystyrene spherical microplastics in human skin fibroblast. Particles down to 500 nm were imaged in whole fixed cells, the nanomechanical characterization allowed for differentiation between internalized and surface attached plastics. This study opens new avenues in microplastics toxicity research.

Evaluating the fate of hexabromocyclododecanes in the coastal environment: Fugacity analysis using field data

Abundant use of plastic materials has increased the amount of microplastics (MPs) and related hazardous chemicals in the marine environment. Hexabromocyclododecanes (HBCDs), brominated flame retardants added to expanded polystyrene (EPS), have been detected in biotic and abiotic samples. In this study, the partition constants of HBCDs between plastics and seawater (K_Psw) were determined. Fugacities of HBCDs in EPS, seawater, sediment, and mussels were obtained to determine the directions of the diffusive flux. The fugacities in EPS (f_EPS) were greater than those in seawater (f_sw), sediment (f_sed), and mussels (f_swmussel-EPS and f_mussel-rock) by three orders of magnitude, indicating that EPS plastics are a significant source of HBCDs. The f_mussel-rock of α-HBCD in rock mussels was greater than f_sw by factors of 1.7, whereas the f_mussel-rock of γ-HBCD was smaller than f_sw by factors of 16, indicating the bioisomerization from γ-to α-HBCD. The relatively constant concentration ratio of β-HBCD to the total HBCDs indicated that β-HBCD is a sufficient tracer for determining the diffusive flux. The f_sed values of HBCDs were greater than f_sw by factors of 17-28, implying a probable advective vertical flow of HBCDs from the EPS plastics, which requires further investigation.

The Proposal and Necessity of the Numerical Description of Nano- and Microplastics' Surfaces (Plastisphere)

The constantly growing amount of synthetic materials < 5 mm, called microplastics (MPs), is fragmented in the environment. Thus, their surface, Plastisphere, is substantially increasing forming an entirely new ecological niche. It has already been extensively studied by microbiologists observing the biofilm and by material scientists interested in the weathering of polymer materials. This paper aims to construct a bridge between the physical and chemical description of the Plastisphere and its microbiological and ecological significance. Various algorithms, based on the analysis of pictures obtained by scanning electron microscopy (SEM), are proposed to describe in detail the morphology of naturally weathered polymers. In particular, one can study the size and distribution of fibres in a standard filter, search the synthetic debris for mapping, estimate the grain size distribution, quantitatively characterize the different patterns of degradation for polymer spheres and ghost nets, or calculate the number of pores per surface. The description and visualization of a texture, as well as the classification of different morphologies present on a surface, are indispensable for the comprehensive characterization of weathered polymers found inside animals (e.g., fishes). All these approaches are presented as case studies and discussed within this work.

Microscopy Methods for Biofilm Imaging: Focus on SEM and VP-SEM Pros and Cons

Simple Summary

Bacterial biofilms cause infections that are often resistant to antibiotic treatments. Research about the formation and elimination of biofilms cannot be undertaken without detailed imaging techniques. In this review, traditional and cutting-edge microscopy methods to study biofilm structure, ultrastructure, and 3-D architecture, with particular emphasis on conventional scanning electron microscopy and variable pressure scanning electron microscopy, are addressed, with the respective advantages and disadvantages. When ultrastructural characterization of biofilm matrix and its embedded bacterial cells is needed, as in studies on the effects of drug treatments on biofilm, scanning electron microscopy with customized protocols such as the osmium tetroxide (OsO₄), ruthenium red (RR), tannic acid (TA), and ionic liquid (IL) must be preferred over other methods for the following: unparalleled image quality, magnification and resolution, minimal sample loss, and actual sample structure preservation. The first step to make a morphological assessment of the effect of the various pharmacological treatments on clinical biofilms is the production of images that faithfully reflect the structure of the sample. The extraction of quantitative parameters from images, possible using specific software, will allow for the scanning electron microscopy morphological evaluation to no longer be considered as an accessory technique, but a quantitative method to all effects.

Abstract

Several imaging methodologies have been used in biofilm studies, contributing to deepening the knowledge on their structure. This review illustrates the most widely used microscopy techniques in biofilm investigations, focusing on traditional and innovative scanning electron microscopy techniques such as scanning electron microscopy (SEM), variable pressure SEM (VP-SEM), environmental SEM (ESEM), and the more recent ambiental SEM (ASEM), ending with the cutting edge Cryo-SEM and focused ion beam SEM (FIB SEM), highlighting the pros and cons of several methods with particular emphasis on conventional SEM and VP-SEM. As each technique has its own advantages and disadvantages, the choice of the most appropriate method must be done carefully, based on the specific aim of the study. The evaluation of the drug effects on biofilm requires imaging methods that show the most detailed ultrastructural features of the biofilm. In this kind of research, the use of scanning electron microscopy with customized protocols such as osmium tetroxide (OsO₄), ruthenium red (RR), tannic acid (TA) staining, and ionic liquid (IL) treatment is unrivalled for its image quality, magnification, resolution, minimal sample loss, and actual sample structure preservation. The combined use of innovative SEM protocols and 3-D image analysis software will allow for quantitative data from SEM images to be extracted; in this way, data from images of samples that have undergone different antibiofilm treatments can be compared.