Degradation synergism between sonolysis and photocatalysis for organic pollutants with different hydrophobicity: A perspective of mechanism and application for high mineralization efficiency

Amplifying chlorinated phenol decomposition via Dual-Pathway O2 Activation: The impact of zirconium loading on BiOCl

The effectiveness of photocatalytic molecular oxygen (O2) activation in pollutant removal relies on the targeted production of reactive oxygen species (ROS). Herein, we demonstrate the dual-pathway activation of O2 on BiOCl through zirconium (Zr) loading. The incorporation of Zr onto the surface of BiOCl not only leads to an increased generation of oxygen vacancies (OV) but also fosters a coupling between the d electrons of Zr and OV, forming dual-active sites known as Zr-oxygen vacancies (Zr-OV). Generally, OV adsorbs O2 and transfers one electron directly to form superoxide radicals (•O2-). Contrary to the conventional single-electron direct activation of O2 to form •O2-, Zr-OV exhibits more flexible coordination and superior electron-donating capabilities. It facilitates O2 conversion to peroxide radicals (O22-) and enables the subsequent generation of •O2- from O22-, significantly promotes the dechlorination and mineralization efficiency of chlorophenol under visible light. This study presents a straightforward strategy to precisely regulate ROS production by expanding pathways, shedding light on the critical role of managing ROS generation for effective pollutant purification.

Ultrasonic treatment of endocrine disrupting compounds, pharmaceuticals, and personal care products in water: An updated review

Pharmaceuticals, personal care products (PPCPs), and endocrine-disrupting compounds (EDCs) have seen a recent sustained increase in usage, leading to increasing discharge and accumulation in wastewater. Conventional water treatment and disinfection processes are somewhat limited in effectively addressing this micropollutant issue. Ultrasonication (US), which serves as an advanced oxidation process, is based on the principle of ultrasound irradiation, exposing water to high-frequency waves, inducing thermal decomposition of H2O while using the produced radicals to oxidize and break down dissolved contaminants. This review evaluates research over the past five years on US-based technologies for the effective degradation of EDCs and PPCPs in water and assesses various factors that can influence the removal rate: solution pH, temperature of water, presence of background common ions, natural organic matter, species that serve as promoters and scavengers, and variations in US conditions (e.g., frequency, power density, and reaction type). This review also discusses various types of carbon/non-carbon catalysts, O3 and ultraviolet processes that can further enhance the degradation efficiency of EDCs and PPCPs in combination with US processes. Furthermore, numerous types of EDCs and PPCPs and recent research trends for these organic contaminants are considered.

Digital imaging-in-flow (FlowCAM) and probabilistic machine learning to assess the sonolytic disinfection of cyanobacteria in sewage wastewater

Assessing the cyanobacteria disinfection in sewage and its compliance with international-standards requires determining the concentration and viability, which can be achieve using Imaging Flow Cytometry device called FlowCAM. The objective is to thoroughly investigate the sonolytic morphological changes and disinfection-performance towards toxic cyanobacteria existing in sewage using the FlowCAM. After optimizing the process conditions, over 80% decline in cyanobacterial cell counts was observed, accompanied by an additional 10-15% of cells exhibiting injuries, as confirmed through morphological investigation. Moreover, for the first time, the experimentally collected data was utilized to build deep-learning probabilistic-neural-networks (PNN) and natural-gradient-boosting (NGBoost) models for predicting disinfection efficiency and ABD area as target outputs. The findings suggest that the NGBoost model exhibited superior prediction performance for both targets, with high test coefficient of determination (R2 > 0.87) and lower test errors (RMSE < 7.10, MAE < 4.14). The confidence interval examination in NGBoost prediction performance showed a minute variation from the experimentally calculated values, suggesting a high accuracy in model prediction. Finally, SHAP analysis suggests the sonolytic time alone contributes around 50% to the cyanobacteria disinfection. Overall, the findings demonstrate the effectiveness of the FlowCAM device and the potential of machine-learning modeling in predicting disinfection outcomes.

Photocatalytic Enhancement Strategy with the Introduction of Metallic Bi: A Review on Bi/Semiconductor Photocatalysts

Semiconductor photocatalysis has great potential in the fields of solar fuel production and environmental remediation. Nevertheless, the photocatalytic efficiency still constrains its practical production applications. The development of new semiconductor materials is essential to enhance the solar energy conversion efficiency of photocatalytic systems. Recently, the research on enhancing the photocatalytic performance of semiconductors by introducing bismuth (Bi) has attracted widespread attention. In this review, we briefly overview the main synthesis methods of Bi/semiconductor photocatalysts and summarize the control of the micromorphology of Bi in Bi/semiconductors and the key role of Bi in the catalytic system. In addition, the promising applications of Bi/semiconductors in photocatalysis, such as pollutant degradation, sterilization, water separation, CO2 reduction, and N2 fixation, are outlined. Finally, an outlook on the challenges and future research directions of Bi/semiconductor photocatalysts is given. We aim to offer guidance for the rational design and synthesis of high-efficiency Bi/semiconductor photocatalysts for energy and environmental applications.

Recent developments on advanced oxidation processes for degradation of pollutants from wastewater with focus on antibiotics and organic dyes

The existence of various pollutants in water environment contributes to global pollution and poses significant threats to humans, wildlife, and other living beings. The emergence of an effective, realistic, cost-effective, and environmentally acceptable technique to treat wastewater generated from different sectors is critical for reducing pollutant accumulation in the environment. The electrochemical advanced oxidation method is a productive technology for treating hazardous effluents because of its potential benefits such as lack of secondary pollutant and high oxidation efficiency. Recent researches on advanced oxidation processes (AOPs) in the period of 2018-2022 are highlighted in this paper. This review emphasizes on recent advances in electro-oxidation (EO), ozone oxidation, sonolysis, radiation, electro-Fenton (EF), photolysis and photocatalysis targeted at treating pharmaceuticals, dyes and pesticides polluted effluents. In the first half of the review, the concept of the AOPs are discussed briefly. Later, the influence of increasing current density, pH, electrode, electrolyte and initial concentration of effluents on degradation are discussed. Lastly, previously reported designs of electrochemical reactors, as well as data on intermediates generated and energy consumption during the electro oxidation and Fenton processes are discussed. According to the literature study, the electro-oxidation technique is more appropriate for organic compounds, whilst the electro-Fenton technique appear to be more appropriate for more complex molecules.

TDP-43 is a potential marker of dopaminergic neuronal damage caused by atrazine exposure

Atrazine (ATR) is one of the herbicides widely used worldwide. Meanwhile, it is an environmental endocrine disruptor that can cross the blood-brain barrier and cause damage to the endocrine-nervous system, especially by affecting the normal secretion of dopamine (DA). Regrettably, effector markers and cascade response mechanisms in damaged dopaminergic neurons induced by ATR exposure remain elusive. In this paper, we focus on investigating aggregation and position change of transactive response DNA-binding protein-43 (TDP-43) after ATR exposure, and illustrating whether TDP-43 can serve as a potential marker of mitochondrial dysfunction which causes damage to dopaminergic neurons. In our study, we used rat adrenal pheochromocytoma cell line 12 (PC12) to establish an in vitro model of dopaminergic neurons. After PC12 was intervened by ATR, we found reduced DA cycling and DA levels, and that TDP-43 aggregated continuously in the cytoplasm and then translocated to mitochondria. Furthermore, the studies we have performed showed that the translocation can cause mitochondrial dysfunction through activating the unfolded mitochondrial protein response (UPRmt), ultimately causing damage to dopaminergic neuron. The research we have done suggests that TDP-43 can serve as a potential effector marker of dopaminergic neuron damaged caused by ATR exposure.

A detailed review on advanced oxidation process in treatment of wastewater: Mechanism, challenges and future outlook

The presence of several contaminants in waterbodies raises global pollution and creates major risks to mankind, wildlife, as well as other living organisms. Development of an effective, feasible, cost-effective and eco-friendly approach for treating wastewater that is discharged from various industries is important for bringing down the deposition of contaminants into environment. Advanced oxidation process is an efficient technique for treating wastewater owing to its advantages such as high oxidation efficacy and does not produce any secondary pollutants. Advanced oxidation process can be performed through various methods such as ozone, Fenton, electrochemical, photolysis, sonolysis, etc. These methods have been widely utilized for degradation of emerging pollutants that cannot be destroyed using conventional approaches. This review focuses on wastewater treatment using advanced oxidation process. A brief discussion on mechanism involved is provided. In addition, various types of advanced oxidation process and their mechanism are explained in detail. Challenges faced during wastewater treatment process using oxidation, electrochemical, Fenton, photocatalysis and sonolysis are discussed elaborately. Advanced oxidation process can be viewed as potential approach for treating wastewater with certain modifications and solving challenges.

A Review of Hybrid Process Development Based on Electrochemical and Advanced Oxidation Processes for the Treatment of Industrial Wastewater

Nowadays, increased human activity, industrialization, and urbanization result in the production of enormous quantities of wastewater. Generally, physicochemical and biological methods are employed to treat industrial effluent and wastewater and have demonstrated high efficacy in removing pollutants. However, some industrial effluent and wastewater contain contaminants that are extremely difficult to remove using standard physicochemical and biological processes. Previously, electrochemical and hybrid advanced oxidation processes (AOP) were considered a viable and promising alternative for achieving an adequate effluent treatment strategy in such instances. These processes rely on the production of hydroxyl radicals, which are highly reactive oxidants that efficiently break down contaminants found in wastewater and industrial effluent. This review focuses on the removal of contaminants from industrial effluents and wastewater through the integration of electrochemical and advanced oxidation techniques. These processes include electrooxidation, electrocoagulation/electroflocculation, electroflotation, photo-Fenton, ozone-photo-Fenton, sono-photo-Fenton, photo-electro-Fenton, ozone/electrocoagulation, sono-electrocoagulation, and peroxi/photo/electrocoagulation. The data acquired from over 150 published articles, most of which were laboratory experiments, demonstrated that the hybrid process is more effective in removing contaminants from industrial effluent and wastewater than standalone processes.

Sonophotocatalysis—Limits and Possibilities for Synergistic Effects

Advanced oxidation processes are promising techniques for water remediation and degradation of micropollutants in aqueous systems. Since single processes such as sonolysis and photocatalysis exhibit limitations, combined AOP systems can enhance degradation efficiency. The present work addresses the synergistic intensification potential of an ultrasound-assisted photocatalysis (sonophotocatalysis) for bisphenol A degradation with a low-frequency sonotrode (f = 20 kHz) in a batch-system. The effects of energy input and suspended photocatalyst dosage (TiO2-nanoparticle, m = 0–0.5 g/L) were investigated. To understand the synergistic effects, the sonication characteristics were investigated by bubble-field analysis, hydrophone measurements, and chemiluminescence of luminol to identify cavitation areas due to the generation of hydroxyl radicals. Comparing the sonophotocatalysis with sonolysis and photocatalysis (incl. mechanical stirring), synergies up to 295% and degradation rates of up to 1.35 min−1 were achieved. Besides the proof of synergistic intensification, the investigation of energy efficiency for a degradation degree of 80% shows that a process optimization can be realized. Thus, it could be demonstrated that there is an effective limit of energy input depending on the TiO2 dosage.

Degradation of gaseous volatile organic compounds (VOCs) by a novel UV-ozone technology

In this study, a UV-assisted ozonation (UV/O₃) process for the degradation of VOCs emissions with a final scrubbing phase was implemented to evaluate the removal efficiency of toluene and to prevent the release of polluting intermediates of the single-step process. Inlet toluene concentration and applied voltage were varied in order to investigate several operating conditions. The results highlighted that at higher inlet concentration the abatement of toluene was lower, while increase in ozone concentration led to an increase of the degradation efficiencies. The additional water scrubbing step enhanced the abatement of UV/O₃ up to 98.5%, due to the solubilisation of ozone and by-products in the process water and, thus, the further oxidation of the contaminants within this phase. A maximum Elimination Capacity (EC_max) of 22.6 g m⁻³ h⁻¹ was achieved with the UV/O₃ + Scrubbing. The combined system boosted higher performance and stability compared to the stand-alone (UV/O₃) process along with a more economical and environmental sustainability.